aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/include/asm/reg.h6
-rw-r--r--arch/powerpc/kernel/prom_init.c1
-rw-r--r--arch/powerpc/mm/hash_utils_64.c22
-rw-r--r--arch/powerpc/mm/pgtable-book3s64.c5
-rw-r--r--arch/powerpc/mm/pgtable-radix.c23
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c49
6 files changed, 68 insertions, 38 deletions
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index c1e82e968506..a0948f40bc7b 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -717,7 +717,7 @@
#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */
#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
#define SPRN_MMCR1 798
-#define SPRN_MMCR2 769
+#define SPRN_MMCR2 785
#define SPRN_MMCRA 0x312
#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */
#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL
@@ -754,13 +754,13 @@
#define SPRN_PMC6 792
#define SPRN_PMC7 793
#define SPRN_PMC8 794
-#define SPRN_SIAR 780
-#define SPRN_SDAR 781
#define SPRN_SIER 784
#define SIER_SIPR 0x2000000 /* Sampled MSR_PR */
#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */
#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */
#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */
+#define SPRN_SIAR 796
+#define SPRN_SDAR 797
#define SPRN_TACR 888
#define SPRN_TCSCR 889
#define SPRN_CSIGR 890
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index da5192590c44..ccd2037c797f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -656,6 +656,7 @@ unsigned char ibm_architecture_vec[] = {
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
W(0xffff0000), W(0x004b0000), /* POWER8E */
+ W(0xffff0000), W(0x004c0000), /* POWER8NVL */
W(0xffff0000), W(0x004d0000), /* POWER8 */
W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 59268969a0bc..b2740c67e172 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -159,6 +159,19 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
},
};
+/*
+ * 'R' and 'C' update notes:
+ * - Under pHyp or KVM, the updatepp path will not set C, thus it *will*
+ * create writeable HPTEs without C set, because the hcall H_PROTECT
+ * that we use in that case will not update C
+ * - The above is however not a problem, because we also don't do that
+ * fancy "no flush" variant of eviction and we use H_REMOVE which will
+ * do the right thing and thus we don't have the race I described earlier
+ *
+ * - Under bare metal, we do have the race, so we need R and C set
+ * - We make sure R is always set and never lost
+ * - C is _PAGE_DIRTY, and *should* always be set for a writeable mapping
+ */
unsigned long htab_convert_pte_flags(unsigned long pteflags)
{
unsigned long rflags = 0;
@@ -186,9 +199,14 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags)
rflags |= 0x1;
}
/*
- * Always add "C" bit for perf. Memory coherence is always enabled
+ * We can't allow hardware to update hpte bits. Hence always
+ * set 'R' bit and set 'C' if it is a write fault
+ * Memory coherence is always enabled
*/
- rflags |= HPTE_R_C | HPTE_R_M;
+ rflags |= HPTE_R_R | HPTE_R_M;
+
+ if (pteflags & _PAGE_DIRTY)
+ rflags |= HPTE_R_C;
/*
* Add in WIG bits
*/
diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c
index eb4451144746..670318766545 100644
--- a/arch/powerpc/mm/pgtable-book3s64.c
+++ b/arch/powerpc/mm/pgtable-book3s64.c
@@ -33,10 +33,7 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address,
changed = !pmd_same(*(pmdp), entry);
if (changed) {
__ptep_set_access_flags(pmdp_ptep(pmdp), pmd_pte(entry));
- /*
- * Since we are not supporting SW TLB systems, we don't
- * have any thing similar to flush_tlb_page_nohash()
- */
+ flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
return changed;
}
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 18b2c11604fa..c939e6e57a9e 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -296,11 +296,6 @@ found:
void __init radix__early_init_mmu(void)
{
unsigned long lpcr;
- /*
- * setup LPCR UPRT based on mmu_features
- */
- lpcr = mfspr(SPRN_LPCR);
- mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
#ifdef CONFIG_PPC_64K_PAGES
/* PAGE_SIZE mappings */
@@ -343,8 +338,11 @@ void __init radix__early_init_mmu(void)
__pte_frag_size_shift = H_PTE_FRAG_SIZE_SHIFT;
radix_init_page_sizes();
- if (!firmware_has_feature(FW_FEATURE_LPAR))
+ if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+ lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
radix_init_partition_table();
+ }
radix_init_pgtable();
}
@@ -353,16 +351,15 @@ void radix__early_init_mmu_secondary(void)
{
unsigned long lpcr;
/*
- * setup LPCR UPRT based on mmu_features
+ * update partition table control register and UPRT
*/
- lpcr = mfspr(SPRN_LPCR);
- mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
- /*
- * update partition table control register, 64 K size.
- */
- if (!firmware_has_feature(FW_FEATURE_LPAR))
+ if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+ lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
+
mtspr(SPRN_PTCR,
__pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
+ }
}
void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index ac3ffd97e059..3998e0f9a03b 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -53,7 +53,6 @@ static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
static int ibm_get_config_addr_info;
static int ibm_get_config_addr_info2;
-static int ibm_configure_bridge;
static int ibm_configure_pe;
/*
@@ -81,7 +80,14 @@ static int pseries_eeh_init(void)
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_configure_pe = rtas_token("ibm,configure-pe");
- ibm_configure_bridge = rtas_token("ibm,configure-bridge");
+
+ /*
+ * ibm,configure-pe and ibm,configure-bridge have the same semantics,
+ * however ibm,configure-pe can be faster. If we can't find
+ * ibm,configure-pe then fall back to using ibm,configure-bridge.
+ */
+ if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
+ ibm_configure_pe = rtas_token("ibm,configure-bridge");
/*
* Necessary sanity check. We needn't check "get-config-addr-info"
@@ -93,8 +99,7 @@ static int pseries_eeh_init(void)
(ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) ||
ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE ||
- (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
- ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) {
+ ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
pr_info("EEH functionality not supported\n");
return -EINVAL;
}
@@ -615,29 +620,41 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
{
int config_addr;
int ret;
+ /* Waiting 0.2s maximum before skipping configuration */
+ int max_wait = 200;
/* Figure out the PE address */
config_addr = pe->config_addr;
if (pe->addr)
config_addr = pe->addr;
- /* Use new configure-pe function, if supported */
- if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+ while (max_wait > 0) {
ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
config_addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid));
- } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid));
- } else {
- return -EFAULT;
- }
- if (ret)
- pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
- __func__, pe->phb->global_number, pe->addr, ret);
+ if (!ret)
+ return ret;
+
+ /*
+ * If RTAS returns a delay value that's above 100ms, cut it
+ * down to 100ms in case firmware made a mistake. For more
+ * on how these delay values work see rtas_busy_delay_time
+ */
+ if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
+ ret <= RTAS_EXTENDED_DELAY_MAX)
+ ret = RTAS_EXTENDED_DELAY_MIN+2;
+
+ max_wait -= rtas_busy_delay_time(ret);
+
+ if (max_wait < 0)
+ break;
+
+ rtas_busy_delay(ret);
+ }
+ pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+ __func__, pe->phb->global_number, pe->addr, ret);
return ret;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 12:09:14 +0000