aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/tty/serdev/core.c2
-rw-r--r--drivers/tty/serial/8250/8250_em.c4
-rw-r--r--drivers/tty/serial/8250/8250_fsl.c4
-rw-r--r--drivers/tty/serial/8250/Kconfig4
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/fsl_lpuart.c23
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c11
-rw-r--r--drivers/tty/vt/vt.c3
8 files changed, 30 insertions, 23 deletions
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index aa80de3a8194..678014253b7b 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -534,7 +534,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
if (!serdev)
continue;
- serdev->dev.of_node = node;
+ device_set_node(&serdev->dev, of_fwnode_handle(node));
err = serdev_device_add(serdev);
if (err) {
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index f8e99995eee9..d94c3811a8f7 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -106,8 +106,8 @@ static int serial8250_em_probe(struct platform_device *pdev)
memset(&up, 0, sizeof(up));
up.port.mapbase = regs->start;
up.port.irq = irq;
- up.port.type = PORT_UNKNOWN;
- up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+ up.port.type = PORT_16750;
+ up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE;
up.port.dev = &pdev->dev;
up.port.private_data = priv;
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 8aad15622a2e..8adfaa183f77 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -34,7 +34,7 @@ int fsl8250_handle_irq(struct uart_port *port)
iir = port->serial_in(port, UART_IIR);
if (iir & UART_IIR_NO_INT) {
- spin_unlock(&up->port.lock);
+ spin_unlock_irqrestore(&up->port.lock, flags);
return 0;
}
@@ -42,7 +42,7 @@ int fsl8250_handle_irq(struct uart_port *port)
if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
up->lsr_saved_flags &= ~UART_LSR_BI;
port->serial_in(port, UART_RX);
- spin_unlock(&up->port.lock);
+ spin_unlock_irqrestore(&up->port.lock, flags);
return 1;
}
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 978dc196c29b..5313aa31930f 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -257,8 +257,9 @@ config SERIAL_8250_ASPEED_VUART
tristate "Aspeed Virtual UART"
depends on SERIAL_8250
depends on OF
- depends on REGMAP && MFD_SYSCON
+ depends on MFD_SYSCON
depends on ARCH_ASPEED || COMPILE_TEST
+ select REGMAP
help
If you want to use the virtual UART (VUART) device on Aspeed
BMC platforms, enable this option. This enables the 16550A-
@@ -299,7 +300,6 @@ config SERIAL_8250_PCI1XXXX
tristate "Microchip 8250 based serial port"
depends on SERIAL_8250 && PCI
select SERIAL_8250_PCILIB
- default SERIAL_8250
help
Select this option if you have a setup with Microchip PCIe
Switch with serial port enabled and wish to enable 8250
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 625358f44419..0072892ca7fc 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1313,7 +1313,7 @@ config SERIAL_FSL_LPUART
config SERIAL_FSL_LPUART_CONSOLE
bool "Console on Freescale lpuart serial port"
- depends on SERIAL_FSL_LPUART
+ depends on SERIAL_FSL_LPUART=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
help
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index e945f41b93d4..56e6ba3250cd 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1354,6 +1354,7 @@ static void lpuart_dma_rx_free(struct uart_port *port)
struct dma_chan *chan = sport->dma_rx_chan;
dmaengine_terminate_sync(chan);
+ del_timer_sync(&sport->lpuart_timer);
dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
kfree(sport->rx_ring.buf);
sport->rx_ring.tail = 0;
@@ -1813,7 +1814,6 @@ static int lpuart32_startup(struct uart_port *port)
static void lpuart_dma_shutdown(struct lpuart_port *sport)
{
if (sport->lpuart_dma_rx_use) {
- del_timer_sync(&sport->lpuart_timer);
lpuart_dma_rx_free(&sport->port);
sport->lpuart_dma_rx_use = false;
}
@@ -1973,10 +1973,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
* Since timer function acqures sport->port.lock, need to stop before
* acquring same lock because otherwise del_timer_sync() can deadlock.
*/
- if (old && sport->lpuart_dma_rx_use) {
- del_timer_sync(&sport->lpuart_timer);
+ if (old && sport->lpuart_dma_rx_use)
lpuart_dma_rx_free(&sport->port);
- }
spin_lock_irqsave(&sport->port.lock, flags);
@@ -2210,10 +2208,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
* Since timer function acqures sport->port.lock, need to stop before
* acquring same lock because otherwise del_timer_sync() can deadlock.
*/
- if (old && sport->lpuart_dma_rx_use) {
- del_timer_sync(&sport->lpuart_timer);
+ if (old && sport->lpuart_dma_rx_use)
lpuart_dma_rx_free(&sport->port);
- }
spin_lock_irqsave(&sport->port.lock, flags);
@@ -2240,9 +2236,15 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
- /* wait transmit engin complete */
- lpuart32_write(&sport->port, 0, UARTMODIR);
- lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+ /*
+ * LPUART Transmission Complete Flag may never be set while queuing a break
+ * character, so skip waiting for transmission complete when UARTCTRL_SBK is
+ * asserted.
+ */
+ if (!(old_ctrl & UARTCTRL_SBK)) {
+ lpuart32_write(&sport->port, 0, UARTMODIR);
+ lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+ }
/* disable transmit and receive */
lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
@@ -3014,7 +3016,6 @@ static int lpuart_suspend(struct device *dev)
* cannot resume as expected, hence gracefully release the
* Rx DMA path before suspend and start Rx DMA path on resume.
*/
- del_timer_sync(&sport->lpuart_timer);
lpuart_dma_rx_free(&sport->port);
/* Disable Rx DMA to use UART port as wakeup source */
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index d69592e5e2ec..28fbc927a546 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -596,7 +596,7 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
if (!qcom_geni_serial_main_active(uport))
return;
- if (port->rx_dma_addr) {
+ if (port->tx_dma_addr) {
geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr,
port->tx_remaining);
port->tx_dma_addr = 0;
@@ -631,9 +631,8 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
if (port->tx_dma_addr)
return;
- xmit_size = uart_circ_chars_pending(xmit);
- if (xmit_size < WAKEUP_CHARS)
- uart_write_wakeup(uport);
+ if (uart_circ_empty(xmit))
+ return;
xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
@@ -1070,6 +1069,10 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
static void qcom_geni_serial_shutdown(struct uart_port *uport)
{
disable_irq(uport->irq);
+
+ if (uart_console(uport))
+ return;
+
qcom_geni_serial_stop_tx(uport);
qcom_geni_serial_stop_rx(uport);
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 57a5c23b51d4..3c2ea9c098f7 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -4545,6 +4545,9 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
int c;
unsigned int vpitch = op->op == KD_FONT_OP_GET_TALL ? op->height : 32;
+ if (vpitch > max_font_height)
+ return -EINVAL;
+
if (op->data) {
font.data = kvmalloc(max_font_size, GFP_KERNEL);
if (!font.data)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 12:58:59 +0000