diff options
| -rw-r--r-- | net/mac80211/mlme.c | 390 |
1 files changed, 195 insertions, 195 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8fdf1e1aee5e..50423c66c239 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -174,6 +174,201 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } +static u32 chandef_downgrade(struct cfg80211_chan_def *c) +{ + u32 ret; + int tmp; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_40: + c->width = NL80211_CHAN_WIDTH_20; + c->center_freq1 = c->chan->center_freq; + ret = IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80: + tmp = (30 + c->chan->center_freq - c->center_freq1)/20; + /* n_P40 */ + tmp /= 2; + /* freq_P40 */ + c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; + c->width = NL80211_CHAN_WIDTH_40; + ret = IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80P80: + c->center_freq2 = 0; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + case NL80211_CHAN_WIDTH_160: + /* n_P20 */ + tmp = (70 + c->chan->center_freq - c->center_freq1)/20; + /* n_P80 */ + tmp /= 4; + c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + default: + case NL80211_CHAN_WIDTH_20_NOHT: + WARN_ON_ONCE(1); + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + } + + WARN_ON_ONCE(!cfg80211_chandef_valid(c)); + + return ret; +} + +static u32 +ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct ieee80211_channel *channel, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + struct cfg80211_chan_def *chandef) +{ + struct cfg80211_chan_def vht_chandef; + u32 ht_cfreq, ret; + + chandef->chan = channel; + chandef->width = NL80211_CHAN_WIDTH_20_NOHT; + chandef->center_freq1 = channel->center_freq; + chandef->center_freq2 = 0; + + if (!ht_oper || !sband->ht_cap.ht_supported) { + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + chandef->width = NL80211_CHAN_WIDTH_20; + + ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, + channel->band); + /* check that channel matches the right operating channel */ + if (channel->center_freq != ht_cfreq) { + /* + * It's possible that some APs are confused here; + * Netgear WNDR3700 sometimes reports 4 higher than + * the actual channel in association responses, but + * since we look at probe response/beacon data here + * it should be OK. + */ + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + /* check 40 MHz support, if we have it */ + if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 += 10; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 -= 10; + break; + } + } else { + /* 40 MHz (and 80 MHz) must be supported for VHT */ + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!vht_oper || !sband->vht_cap.vht_supported) { + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + vht_chandef.chan = channel; + vht_chandef.center_freq1 = + ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, + channel->band); + vht_chandef.center_freq2 = 0; + + if (vht_oper->center_freq_seg2_idx) + vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + vht_oper->center_freq_seg2_idx, + channel->band); + + switch (vht_oper->chan_width) { + case IEEE80211_VHT_CHANWIDTH_USE_HT: + vht_chandef.width = chandef->width; + break; + case IEEE80211_VHT_CHANWIDTH_80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80; + break; + case IEEE80211_VHT_CHANWIDTH_160MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_160; + break; + case IEEE80211_VHT_CHANWIDTH_80P80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + break; + default: + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!cfg80211_chandef_valid(&vht_chandef)) { + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (cfg80211_chandef_identical(chandef, &vht_chandef)) { + ret = 0; + goto out; + } + + if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + *chandef = vht_chandef; + + ret = 0; + +out: + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) { + if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { + ret = IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT; + goto out; + } + + ret |= chandef_downgrade(chandef); + } + + if (chandef->width != vht_chandef.width) + sdata_info(sdata, + "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); + + WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); + return ret; +} + static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, @@ -3321,201 +3516,6 @@ int ieee80211_max_network_latency(struct notifier_block *nb, return 0; } -static u32 chandef_downgrade(struct cfg80211_chan_def *c) -{ - u32 ret; - int tmp; - - switch (c->width) { - case NL80211_CHAN_WIDTH_20: - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_40: - c->width = NL80211_CHAN_WIDTH_20; - c->center_freq1 = c->chan->center_freq; - ret = IEEE80211_STA_DISABLE_40MHZ | - IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80: - tmp = (30 + c->chan->center_freq - c->center_freq1)/20; - /* n_P40 */ - tmp /= 2; - /* freq_P40 */ - c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; - c->width = NL80211_CHAN_WIDTH_40; - ret = IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80P80: - c->center_freq2 = 0; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - case NL80211_CHAN_WIDTH_160: - /* n_P20 */ - tmp = (70 + c->chan->center_freq - c->center_freq1)/20; - /* n_P80 */ - tmp /= 4; - c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - default: - case NL80211_CHAN_WIDTH_20_NOHT: - WARN_ON_ONCE(1); - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - } - - WARN_ON_ONCE(!cfg80211_chandef_valid(c)); - - return ret; -} - -static u32 -ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_channel *channel, - const struct ieee80211_ht_operation *ht_oper, - const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) -{ - struct cfg80211_chan_def vht_chandef; - u32 ht_cfreq, ret; - - chandef->chan = channel; - chandef->width = NL80211_CHAN_WIDTH_20_NOHT; - chandef->center_freq1 = channel->center_freq; - chandef->center_freq2 = 0; - - if (!ht_oper || !sband->ht_cap.ht_supported) { - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - chandef->width = NL80211_CHAN_WIDTH_20; - - ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, - channel->band); - /* check that channel matches the right operating channel */ - if (channel->center_freq != ht_cfreq) { - /* - * It's possible that some APs are confused here; - * Netgear WNDR3700 sometimes reports 4 higher than - * the actual channel in association responses, but - * since we look at probe response/beacon data here - * it should be OK. - */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - /* check 40 MHz support, if we have it */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 += 10; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 -= 10; - break; - } - } else { - /* 40 MHz (and 80 MHz) must be supported for VHT */ - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!vht_oper || !sband->vht_cap.vht_supported) { - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - vht_chandef.chan = channel; - vht_chandef.center_freq1 = - ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, - channel->band); - vht_chandef.center_freq2 = 0; - - if (vht_oper->center_freq_seg2_idx) - vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - vht_oper->center_freq_seg2_idx, - channel->band); - - switch (vht_oper->chan_width) { - case IEEE80211_VHT_CHANWIDTH_USE_HT: - vht_chandef.width = chandef->width; - break; - case IEEE80211_VHT_CHANWIDTH_80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80; - break; - case IEEE80211_VHT_CHANWIDTH_160MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_160; - break; - case IEEE80211_VHT_CHANWIDTH_80P80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80P80; - break; - default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (cfg80211_chandef_identical(chandef, &vht_chandef)) { - ret = 0; - goto out; - } - - if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - *chandef = vht_chandef; - - ret = 0; - -out: - while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, - IEEE80211_CHAN_DISABLED)) { - if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { - ret = IEEE80211_STA_DISABLE_HT | - IEEE80211_STA_DISABLE_VHT; - goto out; - } - - ret |= chandef_downgrade(chandef); - } - - if (chandef->width != vht_chandef.width) - sdata_info(sdata, - "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); - - WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); - return ret; -} - static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss) { |