diff options
| -rw-r--r-- | Documentation/hwmon/ibmaem | 37 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/ibmaem.c | 1111 |
4 files changed, 1163 insertions, 0 deletions
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem new file mode 100644 index 000000000000..2fefaf582a43 --- /dev/null +++ b/Documentation/hwmon/ibmaem @@ -0,0 +1,37 @@ +Kernel driver ibmaem +====================== + +Supported systems: + * Any recent IBM System X server with Active Energy Manager support. + This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, + x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface + driver ("ipmi-si") needs to be loaded for this driver to do anything. + Prefix: 'ibmaem' + Datasheet: Not available + +Author: Darrick J. Wong + +Description +----------- + +This driver implements sensor reading support for the energy and power +meters available on various IBM System X hardware through the BMC. All +sensor banks will be exported as platform devices; this driver can talk +to both v1 and v2 interfaces. This driver is completely separate from the +older ibmpex driver. + +The v1 AEM interface has a simple set of features to monitor energy use. +There is a register that displays an estimate of raw energy consumption +since the last BMC reset, and a power sensor that returns average power +use over a configurable interval. + +The v2 AEM interface is a bit more sophisticated, being able to present +a wider range of energy and power use registers, the power cap as +set by the AEM software, and temperature sensors. + +Special Features +---------------- + +The "power_cap" value displays the current system power cap, as set by +the Active Energy Manager software. Setting the power cap from the host +is not currently supported. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4dc76bc45c9d..00ff53348491 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -330,6 +330,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" select IPMI_SI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3bdb05a5cbd7..d098677e08de 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o +obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c new file mode 100644 index 000000000000..5c006c9a4311 --- /dev/null +++ b/drivers/hwmon/ibmaem.c @@ -0,0 +1,1111 @@ +/* + * A hwmon driver for the IBM Active Energy Manager temperature/power sensors + * and capping functionality. + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/ipmi.h> +#include <linux/module.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/mutex.h> +#include <linux/kdev_t.h> +#include <linux/spinlock.h> +#include <linux/idr.h> +#include <linux/sched.h> +#include <linux/platform_device.h> +#include <linux/math64.h> +#include <linux/time.h> + +#define REFRESH_INTERVAL (HZ) +#define IPMI_TIMEOUT (30 * HZ) +#define DRVNAME "aem" + +#define AEM_NETFN 0x2E + +#define AEM_FIND_FW_CMD 0x80 +#define AEM_ELEMENT_CMD 0x81 +#define AEM_FW_INSTANCE_CMD 0x82 + +#define AEM_READ_ELEMENT_CFG 0x80 +#define AEM_READ_BUFFER 0x81 +#define AEM_READ_REGISTER 0x82 +#define AEM_WRITE_REGISTER 0x83 +#define AEM_SET_REG_MASK 0x84 +#define AEM_CLEAR_REG_MASK 0x85 +#define AEM_READ_ELEMENT_CFG2 0x86 + +#define AEM_CONTROL_ELEMENT 0 +#define AEM_ENERGY_ELEMENT 1 +#define AEM_CLOCK_ELEMENT 4 +#define AEM_POWER_CAP_ELEMENT 7 +#define AEM_EXHAUST_ELEMENT 9 +#define AEM_POWER_ELEMENT 10 + +#define AEM_MODULE_TYPE_ID 0x0001 + +#define AEM2_NUM_ENERGY_REGS 2 +#define AEM2_NUM_PCAP_REGS 6 +#define AEM2_NUM_TEMP_REGS 2 +#define AEM2_NUM_SENSORS 14 + +#define AEM1_NUM_ENERGY_REGS 1 +#define AEM1_NUM_SENSORS 3 + +/* AEM 2.x has more energy registers */ +#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS +/* AEM 2.x needs more sensor files */ +#define AEM_NUM_SENSORS AEM2_NUM_SENSORS + +#define POWER_CAP 0 +#define POWER_CAP_MAX_HOTPLUG 1 +#define POWER_CAP_MAX 2 +#define POWER_CAP_MIN_WARNING 3 +#define POWER_CAP_MIN 4 +#define POWER_AUX 5 + +#define AEM_DEFAULT_POWER_INTERVAL 1000 +#define AEM_MIN_POWER_INTERVAL 200 +#define UJ_PER_MJ 1000L + +static DEFINE_IDR(aem_idr); +static DEFINE_SPINLOCK(aem_idr_lock); + +static struct device_driver aem_driver = { + .name = DRVNAME, + .bus = &platform_bus_type, +}; + +struct aem_ipmi_data { + struct completion read_complete; + struct ipmi_addr address; + ipmi_user_t user; + int interface; + + struct kernel_ipmi_msg tx_message; + long tx_msgid; + + void *rx_msg_data; + unsigned short rx_msg_len; + unsigned char rx_result; + int rx_recv_type; + + struct device *bmc_device; +}; + +struct aem_ro_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + int index; +}; + +struct aem_rw_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + ssize_t (*set)(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count); + int index; +}; + +struct aem_data { + struct list_head list; + + struct device *hwmon_dev; + struct platform_device *pdev; + struct mutex lock; + char valid; + unsigned long last_updated; /* In jiffies */ + u8 ver_major; + u8 ver_minor; + u8 module_handle; + int id; + struct aem_ipmi_data ipmi; + + /* Function to update sensors */ + void (*update)(struct aem_data *data); + + /* + * AEM 1.x sensors: + * Available sensors: + * Energy meter + * Power meter + * + * AEM 2.x sensors: + * Two energy meters + * Two power meters + * Two temperature sensors + * Six power cap registers + */ + + /* sysfs attrs */ + struct sensor_device_attribute sensors[AEM_NUM_SENSORS]; + + /* energy use in mJ */ + u64 energy[AEM_NUM_ENERGY_REGS]; + + /* power sampling interval in ms */ + unsigned long power_period[AEM_NUM_ENERGY_REGS]; + + /* Everything past here is for AEM2 only */ + + /* power caps in dW */ + u16 pcap[AEM2_NUM_PCAP_REGS]; + + /* exhaust temperature in C */ + u8 temp[AEM2_NUM_TEMP_REGS]; +}; + +/* Data structures returned by the AEM firmware */ +struct aem_iana_id { + u8 bytes[3]; +}; +static struct aem_iana_id system_x_id = { + .bytes = {0x4D, 0x4F, 0x00} +}; + +/* These are used to find AEM1 instances */ +struct aem_find_firmware_req { + struct aem_iana_id id; + u8 rsvd; + u16 index; + u16 module_type_id; +} __packed; + +struct aem_find_firmware_resp { + struct aem_iana_id id; + u8 num_instances; +} __packed; + +/* These are used to find AEM2 instances */ +struct aem_find_instance_req { + struct aem_iana_id id; + u8 instance_number; + u16 module_type_id; +} __packed; + +struct aem_find_instance_resp { + struct aem_iana_id id; + u8 num_instances; + u8 major; + u8 minor; + u8 module_handle; + u16 record_id; +} __packed; + +/* These are used to query sensors */ +struct aem_read_sensor_req { + struct aem_iana_id id; + u8 module_handle; + u8 element; + u8 subcommand; + u8 reg; + u8 rx_buf_size; +} __packed; + +struct aem_read_sensor_resp { + struct aem_iana_id id; + u8 bytes[0]; +} __packed; + +/* Data structures to talk to the IPMI layer */ +struct aem_driver_data { + struct list_head aem_devices; + struct ipmi_smi_watcher bmc_events; + struct ipmi_user_hndl ipmi_hndlrs; +}; + +static void aem_register_bmc(int iface, struct device *dev); +static void aem_bmc_gone(int iface); +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data); + +static void aem_remove_sensors(struct aem_data *data); +static int aem_init_aem1(struct aem_ipmi_data *probe); +static int aem_init_aem2(struct aem_ipmi_data *probe); +static int aem1_find_sensors(struct aem_data *data); +static int aem2_find_sensors(struct aem_data *data); +static void update_aem1_sensors(struct aem_data *data); +static void update_aem2_sensors(struct aem_data *data); + +static struct aem_driver_data driver_data = { + .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices), + .bmc_events = { + .owner = THIS_MODULE, + .new_smi = aem_register_bmc, + .smi_gone = aem_bmc_gone, + }, + .ipmi_hndlrs = { + .ipmi_recv_hndl = aem_msg_handler, + }, +}; + +/* Functions to talk to the IPMI layer */ + +/* Initialize IPMI address, message buffers and user data */ +static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface, + struct device *bmc) +{ + int err; + + init_completion(&data->read_complete); + data->bmc_device = bmc; + + /* Initialize IPMI address */ + data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + data->address.channel = IPMI_BMC_CHANNEL; + data->address.data[0] = 0; + data->interface = iface; + + /* Initialize message buffers */ + data->tx_msgid = 0; + data->tx_message.netfn = AEM_NETFN; + + /* Create IPMI messaging interface user */ + err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs, + data, &data->user); + if (err < 0) { + dev_err(bmc, "Unable to register user with IPMI " + "interface %d\n", data->interface); + return -EACCES; + } + + return 0; +} + +/* Send an IPMI command */ +static int aem_send_message(struct aem_ipmi_data *data) +{ + int err; + + err = ipmi_validate_addr(&data->address, sizeof(data->address)); + if (err) + goto out; + + data->tx_msgid++; + err = ipmi_request_settime(data->user, &data->address, data->tx_msgid, + &data->tx_message, data, 0, 0, 0); + if (err) + goto out1; + + return 0; +out1: + dev_err(data->bmc_device, "request_settime=%x\n", err); + return err; +out: + dev_err(data->bmc_device, "validate_addr=%x\n", err); + return err; +} + +/* Dispatch IPMI messages to callers */ +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data) +{ + unsigned short rx_len; + struct aem_ipmi_data *data = user_msg_data; + + if (msg->msgid != data->tx_msgid) { + dev_err(data->bmc_device, "Mismatch between received msgid " + "(%02x) and transmitted msgid (%02x)!\n", + (int)msg->msgid, + (int)data->tx_msgid); + ipmi_free_recv_msg(msg); + return; + } + + data->rx_recv_type = msg->recv_type; + if (msg->msg.data_len > 0) + data->rx_result = msg->msg.data[0]; + else + data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE; + + if (msg->msg.data_len > 1) { + rx_len = msg->msg.data_len - 1; + if (data->rx_msg_len < rx_len) + rx_len = data->rx_msg_len; + data->rx_msg_len = rx_len; + memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len); + } else + data->rx_msg_len = 0; + + ipmi_free_recv_msg(msg); + complete(&data->read_complete); +} + +/* ID functions */ + +/* Obtain an id */ +static int aem_idr_get(int *id) +{ + int i, err; + +again: + if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL))) + return -ENOMEM; + + spin_lock(&aem_idr_lock); + err = idr_get_new(&aem_idr, NULL, &i); + spin_unlock(&aem_idr_lock); + + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return err; + + *id = i & MAX_ID_MASK; + return 0; +} + +/* Release an object ID */ +static void aem_idr_put(int id) +{ + spin_lock(&aem_idr_lock); + idr_remove(&aem_idr, id); + spin_unlock(&aem_idr_lock); +} + +/* Sensor support functions */ + +/* Read a sensor value */ +static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, + void *buf, size_t size) +{ + int rs_size, res; + struct aem_read_sensor_req rs_req; + struct aem_read_sensor_resp *rs_resp; + struct aem_ipmi_data *ipmi = &data->ipmi; + + /* AEM registers are 1, 2, 4 or 8 bytes */ + switch (size) { + case 1: + case 2: + case 4: + case 8: + break; + default: + return -EINVAL; + } + + rs_req.id = system_x_id; + rs_req.module_handle = data->module_handle; + rs_req.element = elt; + rs_req.subcommand = AEM_READ_REGISTER; + rs_req.reg = reg; + rs_req.rx_buf_size = size; + + ipmi->tx_message.cmd = AEM_ELEMENT_CMD; + ipmi->tx_message.data = (char *)&rs_req; + ipmi->tx_message.data_len = sizeof(rs_req); + + rs_size = sizeof(*rs_resp) + size; + rs_resp = kzalloc(rs_size, GFP_KERNEL); + if (!rs_resp) + return -ENOMEM; + + ipmi->rx_msg_data = rs_resp; + ipmi->rx_msg_len = rs_size; + + aem_send_message(ipmi); + + res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (ipmi->rx_result || ipmi->rx_msg_len != rs_size || + memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) { + kfree(rs_resp); + return -ENOENT; + } + + switch (size) { + case 1: { + u8 *x = buf; + *x = rs_resp->bytes[0]; + break; + } + case 2: { + u16 *x = buf; + *x = be16_to_cpup((u16 *)rs_resp->bytes); + break; + } + case 4: { + u32 *x = buf; + *x = be32_to_cpup((u32 *)rs_resp->bytes); + break; + } + case 8: { + u64 *x = buf; + *x = be64_to_cpup((u64 *)rs_resp->bytes); + break; + } + } + + return 0; +} + +/* Update AEM energy registers */ +static void update_aem_energy(struct aem_data *data) +{ + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8); + if (data->ver_major < 2) + return; + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8); +} + +/* Update all AEM1 sensors */ +static void update_aem1_sensors(struct aem_data *data) +{ + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); +out: + mutex_unlock(&data->lock); +} + +/* Update all AEM2 sensors */ +static void update_aem2_sensors(struct aem_data *data) +{ + int i; + + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1); + + for (i = POWER_CAP; i <= POWER_AUX; i++) + aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i, + &data->pcap[i], 2); +out: + mutex_unlock(&data->lock); +} + +/* Delete an AEM instance */ +static void aem_delete(struct aem_data *data) +{ + list_del(&data->list); + aem_remove_sensors(data); + hwmon_device_unregister(data->hwmon_dev); + ipmi_destroy_user(data->ipmi.user); + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); + aem_idr_put(data->id); + kfree(data); +} + +/* Probe functions for AEM1 devices */ + +/* Retrieve version and module handle for an AEM1 instance */ +static int aem_find_aem1_count(struct aem_ipmi_data *data) +{ + int res; + struct aem_find_firmware_req ff_req; + struct aem_find_firmware_resp ff_resp; + + ff_req.id = system_x_id; + ff_req.index = 0; + ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FIND_FW_CMD; + data->tx_message.data = (char *)&ff_req; + data->tx_message.data_len = sizeof(ff_req); + + data->rx_msg_data = &ff_resp; + data->rx_msg_len = sizeof(ff_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) || + memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return ff_resp.num_instances; +} + +/* Find and initialize one AEM1 instance */ +static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = 1; + data->ver_minor = 0; + data->module_handle = module_handle; + for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem1_sensors; + + /* Find sensors */ + if (aem1_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM1 instances */ +static int aem_init_aem1(struct aem_ipmi_data *probe) +{ + int num, i, err; + + num = aem_find_aem1_count(probe); + for (i = 0; i < num; i++) { + err = aem_init_aem1_inst(probe, i); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM1 0x%X\n", + err, i); + return err; + } + } + + return 0; +} + +/* Probe functions for AEM2 devices */ + +/* Retrieve version and module handle for an AEM2 instance */ +static int aem_find_aem2(struct aem_ipmi_data *data, + struct aem_find_instance_resp *fi_resp, + int instance_num) +{ + int res; + struct aem_find_instance_req fi_req; + + fi_req.id = system_x_id; + fi_req.instance_number = instance_num; + fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FW_INSTANCE_CMD; + data->tx_message.data = (char *)&fi_req; + data->tx_message.data_len = sizeof(fi_req); + + data->rx_msg_data = fi_resp; + data->rx_msg_len = sizeof(*fi_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) || + memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return 0; +} + +/* Find and initialize one AEM2 instance */ +static int aem_init_aem2_inst(struct aem_ipmi_data *probe, + struct aem_find_instance_resp *fi_resp) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = fi_resp->major; + data->ver_minor = fi_resp->minor; + data->module_handle = fi_resp->module_handle; + for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem2_sensors; + + /* Find sensors */ + if (aem2_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM2 instances */ +static int aem_init_aem2(struct aem_ipmi_data *probe) +{ + struct aem_find_instance_resp fi_resp; + int err; + int i = 0; + + while (!aem_find_aem2(probe, &fi_resp, i)) { + if (fi_resp.major != 2) { + dev_err(probe->bmc_device, "Unknown AEM v%d; please " + "report this to the maintainer.\n", + fi_resp.major); + i++; + continue; + } + err = aem_init_aem2_inst(probe, &fi_resp); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM2 0x%X\n", + err, fi_resp.module_handle); + return err; + } + i++; + } + + return 0; +} + +/* Probe a BMC for AEM firmware instances */ +static void aem_register_bmc(int iface, struct device *dev) +{ + struct aem_ipmi_data probe; + + if (aem_init_ipmi_data(&probe, iface, dev)) + return; + + /* Ignore probe errors; they won't cause problems */ + aem_init_aem1(&probe); + aem_init_aem2(&probe); + + ipmi_destroy_user(probe.user); +} + +/* Handle BMC deletion */ +static void aem_bmc_gone(int iface) +{ + struct aem_data *p1, *next1; + + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + if (p1->ipmi.interface == iface) + aem_delete(p1); +} + +/* sysfs support functions */ + +/* AEM device name */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major); +} +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +/* AEM device version */ +static ssize_t show_version(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor); +} +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0); + +/* Display power use */ +static ssize_t aem_show_power(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *data = dev_get_drvdata(dev); + u64 before, after, delta, time; + signed long leftover; + struct timespec b, a; + + mutex_lock(&data->lock); + update_aem_energy(data); + getnstimeofday(&b); + before = data->energy[attr->index]; + + leftover = schedule_timeout_interruptible( + msecs_to_jiffies(data->power_period[attr->index]) + ); + if (leftover) { + mutex_unlock(&data->lock); + return 0; + } + + update_aem_energy(data); + getnstimeofday(&a); + after = data->energy[attr->index]; + mutex_unlock(&data->lock); + + time = timespec_to_ns(&a) - timespec_to_ns(&b); + delta = (after - before) * UJ_PER_MJ; + + return sprintf(buf, "%llu\n", + (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time)); +} + +/* Display energy use */ +static ssize_t aem_show_energy(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%llu\n", + (unsigned long long)a->energy[attr->index] * 1000); +} + +/* Display power interval registers */ +static ssize_t aem_show_power_period(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%lu\n", a->power_period[attr->index]); +} + +/* Set power interval registers */ +static ssize_t aem_set_power_period(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + unsigned long temp; + int res; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + if (temp < AEM_MIN_POWER_INTERVAL) + return -EINVAL; + + mutex_lock(&a->lock); + a->power_period[attr->index] = temp; + mutex_unlock(&a->lock); + + return count; +} + +/* Discover sensors on an AEM device */ +static int aem_register_sensors(struct aem_data *data, + struct aem_ro_sensor_template *ro, + struct aem_rw_sensor_template *rw) +{ + struct device *dev = &data->pdev->dev; + struct sensor_device_attribute *sensors = data->sensors; + int err; + + /* Set up read-only sensors */ + while (ro->label) { + sensors->dev_attr.attr.name = ro->label; + sensors->dev_attr.attr.mode = S_IRUGO; + sensors->dev_attr.show = ro->show; + sensors->index = ro->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + ro++; + } + + /* Set up read-write sensors */ + while (rw->label) { + sensors->dev_attr.attr.name = rw->label; + sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; + sensors->dev_attr.show = rw->show; + sensors->dev_attr.store = rw->set; + sensors->index = rw->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + rw++; + } + + err = device_create_file(dev, &sensor_dev_attr_name.dev_attr); + if (err) + goto error; + err = device_create_file(dev, &sensor_dev_attr_version.dev_attr); + return err; + +error: + aem_remove_sensors(data); + return err; +} + +/* sysfs support functions for AEM2 sensors */ + +/* Display temperature use */ +static ssize_t aem2_show_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->temp[attr->index] * 1000); +} + +/* Display power-capping registers */ +static ssize_t aem2_show_pcap_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000); +} + +/* Remove sensors attached to an AEM device */ +static void aem_remove_sensors(struct aem_data *data) +{ + int i; + + for (i = 0; i < AEM_NUM_SENSORS; i++) { + if (!data->sensors[i].dev_attr.attr.name) + continue; + device_remove_file(&data->pdev->dev, + &data->sensors[i].dev_attr); + } + + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_name.dev_attr); + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_version.dev_attr); +} + +/* Sensor probe functions */ + +/* Description of AEM1 sensors */ +static struct aem_ro_sensor_template aem1_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"power1_average", aem_show_power, 0}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem1_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{NULL, NULL, NULL, 0}, +}; + +/* Description of AEM2 sensors */ +static struct aem_ro_sensor_template aem2_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"energy2_input", aem_show_energy, 1}, +{"power1_average", aem_show_power, 0}, +{"power2_average", aem_show_power, 1}, +{"temp1_input", aem2_show_temp, 0}, +{"temp2_input", aem2_show_temp, 1}, + +{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG}, +{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX}, +{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING}, +{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN}, + +{"power3_average", aem2_show_pcap_value, POWER_AUX}, +{"power_cap", aem2_show_pcap_value, POWER_CAP}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem2_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1}, +{NULL, NULL, NULL, 0}, +}; + +/* Set up AEM1 sensor attrs */ +static int aem1_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors); +} + +/* Set up AEM2 sensor attrs */ +static int aem2_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors); +} + +/* Module init/exit routines */ + +static int __init aem_init(void) +{ + int res; + + res = driver_register(&aem_driver); + if (res) { + printk(KERN_ERR "Can't register aem driver\n"); + return res; + } + + res = ipmi_smi_watcher_register(&driver_data.bmc_events); + if (res) + goto ipmi_reg_err; + return 0; + +ipmi_reg_err: + driver_unregister(&aem_driver); + return res; + +} + +static void __exit aem_exit(void) +{ + struct aem_data *p1, *next1; + + ipmi_smi_watcher_unregister(&driver_data.bmc_events); + driver_unregister(&aem_driver); + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + aem_delete(p1); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(aem_init); +module_exit(aem_exit); |