diff options
75 files changed, 1632 insertions, 1609 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index 1f293ea24cd8..55deb68230eb 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -102,7 +102,7 @@ Required sub-node properties: [0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/thermal/thermal.txt +[3] Documentation/devicetree/bindings/thermal/thermal*.yaml [4] Documentation/devicetree/bindings/sram/sram.yaml [5] Documentation/devicetree/bindings/reset/reset.txt diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index dd04d9d9a1b8..bcd6c3ec471e 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -108,7 +108,7 @@ Required properties: [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/thermal/thermal.txt +[2] Documentation/devicetree/bindings/thermal/thermal*.yaml [3] Documentation/devicetree/bindings/sram/sram.yaml [4] Documentation/devicetree/bindings/power/power-domain.yaml diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 10b8459e49f8..6064d98b1031 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -176,7 +176,7 @@ Required properties: "fsl,imx8qxp-sc-thermal" followed by "fsl,imx-sc-thermal"; -- #thermal-sensor-cells: See Documentation/devicetree/bindings/thermal/thermal.txt +- #thermal-sensor-cells: See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. Example (imx8qxp): diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt index 098d932fc963..e31511255d8e 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt @@ -111,7 +111,7 @@ Thermal: -------- For common binding part and usage, refer to -Documentation/devicetree/bindings/thermal/thermal.txt +Documentation/devicetree/bindings/thermal/thermal*.yaml The thermal IP can probe the temperature all around the processor. It may feature several channels, each of them wired to one sensor. diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index f982a8ed9396..a21f7709596c 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -203,7 +203,7 @@ It is possible to setup an overheat interrupt by giving at least one critical point to any subnode of the thermal-zone node. For common binding part and usage, refer to -Documentation/devicetree/bindings/thermal/thermal.txt +Documentation/devicetree/bindings/thermal/thermal*.yaml Required properties: - compatible: must be one of: diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt index 332aed8f4597..56f442374383 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt @@ -18,7 +18,8 @@ Optional properties: in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. - #cooling-cells: - Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. + Please refer to + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml. Examples: diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index 0551c78619de..ea4994b35207 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -21,8 +21,8 @@ Optional properties: flow is handled by hardware, hence no software "voltage tracking" is needed. - #cooling-cells: - Please refer to Documentation/devicetree/bindings/thermal/thermal.txt - for detail. + For details, please refer to + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml Example 1 (MT7623 SoC): diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt index daeca6ae6b76..52a24b82fd86 100644 --- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -5,7 +5,7 @@ Required properties: - clocks: Must contain an entry for the CPU clock. See ../clocks/clock-bindings.txt for details. - operating-points-v2: See ../bindings/opp/opp.txt for details. -- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details. +- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details. For each opp entry in 'operating-points-v2' table: - opp-supported-hw: Two bitfields indicating: diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt index 2becdcfdc840..f4cfa350f6a1 100644 --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt @@ -12,7 +12,8 @@ Optional properties: - alarm-gpios: This pin going active indicates something is wrong with the fan, and a udev event will be fired. - #cooling-cells: If used as a cooling device, must be <2> - Also see: Documentation/devicetree/bindings/thermal/thermal.txt + Also see: + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml min and max states are derived from the speed-map of the fan. Note: At least one the "gpios" or "alarm-gpios" properties must be set. diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt index c76a7ac47c34..398dcb965751 100644 --- a/Documentation/devicetree/bindings/hwmon/lm90.txt +++ b/Documentation/devicetree/bindings/hwmon/lm90.txt @@ -34,8 +34,8 @@ Optional properties: LM90 "-ALERT" pin output. See interrupt-controller/interrupts.txt for the format. -- #thermal-sensor-cells: should be set to 1. See thermal/thermal.txt for - details. See <include/dt-bindings/thermal/lm90.h> for the +- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml + for details. See <include/dt-bindings/thermal/lm90.h> for the definition of the local, remote and 2nd remote sensor index constants. diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 87369264feb9..44ba6765697d 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -50,7 +50,7 @@ properties: nvmem-cell-names: const: calibration - # See ./thermal.txt for details + # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: - 0 diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt index 703979dbd577..12fc4ef04837 100644 --- a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt @@ -6,7 +6,7 @@ transaction. Required properties: - compatible: "amazon,al-thermal". - reg: The physical base address and length of the sensor's registers. -- #thermal-sensor-cells: Must be 1. See ./thermal.txt for a description. +- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. Example: thermal: thermal { diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml index f3e68ed03abf..1ab5070c751d 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -23,7 +23,7 @@ properties: compatible: const: brcm,bcm2711-thermal - # See ./thermal.txt for details + # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": const: 0 diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index da8c5b73ad10..a3e9ec5dc7ac 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -7,7 +7,7 @@ compatible: should be one of: "brcm,bcm2835-thermal", "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" reg: Address range of the thermal registers. clocks: Phandle of the clock used by the thermal sensor. -#thermal-sensor-cells: should be 0 (see thermal.txt) +#thermal-sensor-cells: should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) Example: diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index cef716a236f1..4b19d80e6558 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -9,7 +9,7 @@ by /SOCTHERM/tsensor. - clock-names: Input clock name, should be 'thermal_clk'. - clocks: phandles for clock specified in "clock-names" property. -- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description. +- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. Example : diff --git a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt index 323a3b3822aa..82ed5d487966 100644 --- a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt +++ b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt @@ -8,12 +8,12 @@ below threshold level. Required properties: ------------------- -#thermal-sensor-cells: Please refer <devicetree/bindings/thermal/thermal.txt> - for more details. +#thermal-sensor-cells: For more details, please refer to + <devicetree/bindings/thermal/thermal-sensor.yaml> The value must be 0. For more details, please refer generic thermal DT binding document -<devicetree/bindings/thermal/thermal.txt>. +<devicetree/bindings/thermal/thermal*.yaml>. Please refer <devicetree/bindings/mfd/max77620.txt> for mfd DT binding document for the MAX77620. diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt index f8d7831f3974..1e249c42fae0 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt @@ -23,7 +23,7 @@ Required properties: - resets: Reference to the reset controller controlling the thermal controller. - mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses - mediatek,apmixedsys: A phandle to the APMIXEDSYS controller. -- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description. +- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. Optional properties: - nvmem-cells: A phandle to the calibration data provided by a nvmem device. If diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index f02f38527a6b..db880e7ed713 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -28,9 +28,10 @@ Required properties : See ../reset/reset.txt for details. - reset-names : Must include the following entries: - soctherm -- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description - of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a - list of valid values when referring to thermal sensors. +- #thermal-sensor-cells : Should be 1. For a description of this property, see + Documentation/devicetree/bindings/thermal/thermal-sensor.yaml. + See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values + when referring to thermal sensors. - throttle-cfgs: A sub-node which is a container of configuration for each hardware throttle events. These events can be set as cooling devices. * throttle events: Sub-nodes must be named as "light" or "heavy". @@ -62,7 +63,8 @@ Required properties : TEGRA_SOCTHERM_THROT_LEVEL_MED (75%), TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%). - #cooling-cells: Should be 1. This cooling device only support on/off state. - See ./thermal.txt for a description of this property. + For a description of this property see: + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml Optional properties: The following properties are T210 specific and valid only for OCx throttle events. diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt index e17c07be270b..fc87f6aa1b8f 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -8,7 +8,7 @@ exposed by BPMP. The BPMP thermal node must be located directly inside the main BPMP node. See ../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. -This node represents a thermal sensor. See thermal.txt for details of the +This node represents a thermal sensor. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details of the core thermal binding. Required properties: diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt index 0273a92a2a84..2d5b2ad03314 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt @@ -8,7 +8,7 @@ Required properties: - compatible: Should contain "qcom,spmi-temp-alarm". - reg: Specifies the SPMI address. - interrupts: PMIC temperature alarm interrupt. -- #thermal-sensor-cells: Should be 0. See thermal.txt for a description. +- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. Optional properties: - io-channels: Should contain IIO channel specifier for the ADC channel, diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index adac01c9d9cd..95462e071ab4 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -23,6 +23,7 @@ properties: items: - enum: - qcom,msm8916-tsens + - qcom,msm8939-tsens - qcom,msm8974-tsens - const: qcom,tsens-v0_1 diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index c6aac9bcacf1..7f94669e9ebe 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -24,7 +24,7 @@ Required properties: - pinctrl-1 : The "default" pinctrl state, it will be set after reset the TSADC controller. - pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. -- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- #thermal-sensor-cells : Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. Optional properties: - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt index 212198d4b937..2c918d742867 100644 --- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/tango-thermal.txt @@ -4,7 +4,7 @@ The SMP8758 SoC includes 3 instances of this temperature sensor (in the CPU, video decoder, and PCIe controller). Required properties: -- #thermal-sensor-cells: Should be 0 (see thermal.txt) +- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) - compatible: "sigma,smp8758-thermal" - reg: Address range of the thermal registers diff --git a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt index 691a09db2fef..e136946a2f4f 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt +++ b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt @@ -8,7 +8,7 @@ temperature using voltage-temperature lookup table. Required properties: =================== - compatible: Must be "generic-adc-thermal". -- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description +- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description of this property. Optional properties: =================== diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt deleted file mode 100644 index f78bec19ca35..000000000000 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ /dev/null @@ -1,586 +0,0 @@ -* Thermal Framework Device Tree descriptor - -This file describes a generic binding to provide a way of -defining hardware thermal structure using device tree. -A thermal structure includes thermal zones and their components, -such as trip points, polling intervals, sensors and cooling devices -binding descriptors. - -The target of device tree thermal descriptors is to describe only -the hardware thermal aspects. The thermal device tree bindings are -not about how the system must control or which algorithm or policy -must be taken in place. - -There are five types of nodes involved to describe thermal bindings: -- thermal sensors: devices which may be used to take temperature - measurements. -- cooling devices: devices which may be used to dissipate heat. -- trip points: describe key temperatures at which cooling is recommended. The - set of points should be chosen based on hardware limits. -- cooling maps: used to describe links between trip points and cooling devices; -- thermal zones: used to describe thermal data within the hardware; - -The following is a description of each of these node types. - -* Thermal sensor devices - -Thermal sensor devices are nodes providing temperature sensing capabilities on -thermal zones. Typical devices are I2C ADC converters and bandgaps. These are -nodes providing temperature data to thermal zones. Thermal sensor devices may -control one or more internal sensors. - -Required property: -- #thermal-sensor-cells: Used to provide sensor device specific information - Type: unsigned while referring to it. Typically 0 on thermal sensor - Size: one cell nodes with only one sensor, and at least 1 on nodes - with several internal sensors, in order - to identify uniquely the sensor instances within - the IC. See thermal zone binding for more details - on how consumers refer to sensor devices. - -* Cooling device nodes - -Cooling devices are nodes providing control on power dissipation. There -are essentially two ways to provide control on power dissipation. First -is by means of regulating device performance, which is known as passive -cooling. A typical passive cooling is a CPU that has dynamic voltage and -frequency scaling (DVFS), and uses lower frequencies as cooling states. -Second is by means of activating devices in order to remove -the dissipated heat, which is known as active cooling, e.g. regulating -fan speeds. In both cases, cooling devices shall have a way to determine -the state of cooling in which the device is. - -Any cooling device has a range of cooling states (i.e. different levels -of heat dissipation). For example a fan's cooling states correspond to -the different fan speeds possible. Cooling states are referred to by -single unsigned integers, where larger numbers mean greater heat -dissipation. The precise set of cooling states associated with a device -should be defined in a particular device's binding. -For more examples of cooling devices, refer to the example sections below. - -Required properties: -- #cooling-cells: Used to provide cooling device specific information - Type: unsigned while referring to it. Must be at least 2, in order - Size: one cell to specify minimum and maximum cooling state used - in the reference. The first cell is the minimum - cooling state requested and the second cell is - the maximum cooling state requested in the reference. - See Cooling device maps section below for more details - on how consumers refer to cooling devices. - -* Trip points - -The trip node is a node to describe a point in the temperature domain -in which the system takes an action. This node describes just the point, -not the action. - -Required properties: -- temperature: An integer indicating the trip temperature level, - Type: signed in millicelsius. - Size: one cell - -- hysteresis: A low hysteresis value on temperature property (above). - Type: unsigned This is a relative value, in millicelsius. - Size: one cell - -- type: a string containing the trip type. Expected values are: - "active": A trip point to enable active cooling - "passive": A trip point to enable passive cooling - "hot": A trip point to notify emergency - "critical": Hardware not reliable. - Type: string - -* Cooling device maps - -The cooling device maps node is a node to describe how cooling devices -get assigned to trip points of the zone. The cooling devices are expected -to be loaded in the target system. - -Required properties: -- cooling-device: A list of phandles of cooling devices with their specifiers, - Type: phandle + referring to which cooling devices are used in this - cooling specifier binding. In the cooling specifier, the first cell - is the minimum cooling state and the second cell - is the maximum cooling state used in this map. -- trip: A phandle of a trip point node within the same thermal - Type: phandle of zone. - trip point node - -Optional property: -- contribution: The cooling contribution to the thermal zone of the - Type: unsigned referred cooling device at the referred trip point. - Size: one cell The contribution is a ratio of the sum - of all cooling contributions within a thermal zone. - -Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle -limit specifier means: -(i) - minimum state allowed for minimum cooling state used in the reference. -(ii) - maximum state allowed for maximum cooling state used in the reference. -Refer to include/dt-bindings/thermal/thermal.h for definition of this constant. - -* Thermal zone nodes - -The thermal zone node is the node containing all the required info -for describing a thermal zone, including its cooling device bindings. The -thermal zone node must contain, apart from its own properties, one sub-node -containing trip nodes and one sub-node containing all the zone cooling maps. - -Required properties: -- polling-delay: The maximum number of milliseconds to wait between polls - Type: unsigned when checking this thermal zone. - Size: one cell - -- polling-delay-passive: The maximum number of milliseconds to wait - Type: unsigned between polls when performing passive cooling. - Size: one cell - -- thermal-sensors: A list of thermal sensor phandles and sensor specifier - Type: list of used while monitoring the thermal zone. - phandles + sensor - specifier - -- trips: A sub-node which is a container of only trip point nodes - Type: sub-node required to describe the thermal zone. - -Optional property: -- cooling-maps: A sub-node which is a container of only cooling device - Type: sub-node map nodes, used to describe the relation between trips - and cooling devices. - -- coefficients: An array of integers (one signed cell) containing - Type: array coefficients to compose a linear relation between - Elem size: one cell the sensors listed in the thermal-sensors property. - Elem type: signed Coefficients defaults to 1, in case this property - is not specified. A simple linear polynomial is used: - Z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn. - - The coefficients are ordered and they match with sensors - by means of sensor ID. Additional coefficients are - interpreted as constant offset. - -- sustainable-power: An estimate of the sustainable power (in mW) that the - Type: unsigned thermal zone can dissipate at the desired - Size: one cell control temperature. For reference, the - sustainable power of a 4'' phone is typically - 2000mW, while on a 10'' tablet is around - 4500mW. - -Note: The delay properties are bound to the maximum dT/dt (temperature -derivative over time) in two situations for a thermal zone: -(i) - when passive cooling is activated (polling-delay-passive); and -(ii) - when the zone just needs to be monitored (polling-delay) or -when active cooling is activated. - -The maximum dT/dt is highly bound to hardware power consumption and dissipation -capability. The delays should be chosen to account for said max dT/dt, -such that a device does not cross several trip boundaries unexpectedly -between polls. Choosing the right polling delays shall avoid having the -device in temperature ranges that may damage the silicon structures and -reduce silicon lifetime. - -* The thermal-zones node - -The "thermal-zones" node is a container for all thermal zone nodes. It shall -contain only sub-nodes describing thermal zones as in the section -"Thermal zone nodes". The "thermal-zones" node appears under "/". - -* Examples - -Below are several examples on how to use thermal data descriptors -using device tree bindings: - -(a) - CPU thermal zone - -The CPU thermal zone example below describes how to setup one thermal zone -using one single sensor as temperature source and many cooling devices and -power dissipation control sources. - -#include <dt-bindings/thermal/thermal.h> - -cpus { - /* - * Here is an example of describing a cooling device for a DVFS - * capable CPU. The CPU node describes its four OPPs. - * The cooling states possible are 0..3, and they are - * used as OPP indexes. The minimum cooling state is 0, which means - * all four OPPs can be available to the system. The maximum - * cooling state is 3, which means only the lowest OPPs (198MHz@0.85V) - * can be available in the system. - */ - cpu0: cpu@0 { - ... - operating-points = < - /* kHz uV */ - 970000 1200000 - 792000 1100000 - 396000 950000 - 198000 850000 - >; - #cooling-cells = <2>; /* min followed by max */ - }; - ... -}; - -&i2c1 { - ... - /* - * A simple fan controller which supports 10 speeds of operation - * (represented as 0-9). - */ - fan0: fan@48 { - ... - #cooling-cells = <2>; /* min followed by max */ - }; -}; - -ocp { - ... - /* - * A simple IC with a single bandgap temperature sensor. - */ - bandgap0: bandgap@0000ed00 { - ... - #thermal-sensor-cells = <0>; - }; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - thermal-sensors = <&bandgap0>; - - trips { - cpu_alert0: cpu-alert0 { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - cpu_alert1: cpu-alert1 { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <125000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 THERMAL_NO_LIMIT 4>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 5 THERMAL_NO_LIMIT>, <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - -In the example above, the ADC sensor (bandgap0) at address 0x0000ED00 is -used to monitor the zone 'cpu-thermal' using its sole sensor. A fan -device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten -different cooling states 0-9. It is used to remove the heat out of -the thermal zone 'cpu-thermal' using its cooling states -from its minimum to 4, when it reaches trip point 'cpu_alert0' -at 90C, as an example of active cooling. The same cooling device is used at -'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also -linked to the same thermal zone, 'cpu-thermal', as a passive cooling device, -using all its cooling states at trip point 'cpu_alert1', -which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the -temperature of 125C, represented by the trip point 'cpu_crit', the silicon -is not reliable anymore. - -(b) - IC with several internal sensors - -The example below describes how to deploy several thermal zones based off a -single sensor IC, assuming it has several internal sensors. This is a common -case on SoC designs with several internal IPs that may need different thermal -requirements, and thus may have their own sensor to monitor or detect internal -hotspots in their silicon. - -#include <dt-bindings/thermal/thermal.h> - -ocp { - ... - /* - * A simple IC with several bandgap temperature sensors. - */ - bandgap0: bandgap@0000ed00 { - ... - #thermal-sensor-cells = <1>; - }; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&bandgap0 0>; - - trips { - /* each zone within the SoC may have its own trips */ - cpu_alert: cpu-alert { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <125000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - /* each zone within the SoC may have its own cooling */ - ... - }; - }; - - gpu_thermal: gpu-thermal { - polling-delay-passive = <120>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&bandgap0 1>; - - trips { - /* each zone within the SoC may have its own trips */ - gpu_alert: gpu-alert { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - gpu_crit: gpu-crit { - temperature = <105000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - /* each zone within the SoC may have its own cooling */ - ... - }; - }; - - dsp_thermal: dsp-thermal { - polling-delay-passive = <50>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&bandgap0 2>; - - trips { - /* each zone within the SoC may have its own trips */ - dsp_alert: dsp-alert { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - dsp_crit: gpu-crit { - temperature = <135000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - /* each zone within the SoC may have its own cooling */ - ... - }; - }; -}; - -In the example above, there is one bandgap IC which has the capability to -monitor three sensors. The hardware has been designed so that sensors are -placed on different places in the DIE to monitor different temperature -hotspots: one for CPU thermal zone, one for GPU thermal zone and the -other to monitor a DSP thermal zone. - -Thus, there is a need to assign each sensor provided by the bandgap IC -to different thermal zones. This is achieved by means of using the -#thermal-sensor-cells property and using the first cell of the sensor -specifier as sensor ID. In the example, then, <bandgap 0> is used to -monitor CPU thermal zone, <bandgap 1> is used to monitor GPU thermal -zone and <bandgap 2> is used to monitor DSP thermal zone. Each zone -may be uncorrelated, having its own dT/dt requirements, trips -and cooling maps. - - -(c) - Several sensors within one single thermal zone - -The example below illustrates how to use more than one sensor within -one thermal zone. - -#include <dt-bindings/thermal/thermal.h> - -&i2c1 { - ... - /* - * A simple IC with a single temperature sensor. - */ - adc: sensor@49 { - ... - #thermal-sensor-cells = <0>; - }; -}; - -ocp { - ... - /* - * A simple IC with a single bandgap temperature sensor. - */ - bandgap0: bandgap@0000ed00 { - ... - #thermal-sensor-cells = <0>; - }; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - thermal-sensors = <&bandgap0>, /* cpu */ - <&adc>; /* pcb north */ - - /* hotspot = 100 * bandgap - 120 * adc + 484 */ - coefficients = <100 -120 484>; - - trips { - ... - }; - - cooling-maps { - ... - }; - }; -}; - -In some cases, there is a need to use more than one sensor to extrapolate -a thermal hotspot in the silicon. The above example illustrates this situation. -For instance, it may be the case that a sensor external to CPU IP may be placed -close to CPU hotspot and together with internal CPU sensor, it is used -to determine the hotspot. Assuming this is the case for the above example, -the hypothetical extrapolation rule would be: - hotspot = 100 * bandgap - 120 * adc + 484 - -In other context, the same idea can be used to add fixed offset. For instance, -consider the hotspot extrapolation rule below: - hotspot = 1 * adc + 6000 - -In the above equation, the hotspot is always 6C higher than what is read -from the ADC sensor. The binding would be then: - thermal-sensors = <&adc>; - - /* hotspot = 1 * adc + 6000 */ - coefficients = <1 6000>; - -(d) - Board thermal - -The board thermal example below illustrates how to setup one thermal zone -with many sensors and many cooling devices. - -#include <dt-bindings/thermal/thermal.h> - -&i2c1 { - ... - /* - * An IC with several temperature sensor. - */ - adc_dummy: sensor@50 { - ... - #thermal-sensor-cells = <1>; /* sensor internal ID */ - }; -}; - -thermal-zones { - batt-thermal { - polling-delay-passive = <500>; /* milliseconds */ - polling-delay = <2500>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&adc_dummy 4>; - - trips { - ... - }; - - cooling-maps { - ... - }; - }; - - board_thermal: board-thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <2500>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&adc_dummy 0>, /* pcb top edge */ - <&adc_dummy 1>, /* lcd */ - <&adc_dummy 2>; /* back cover */ - /* - * An array of coefficients describing the sensor - * linear relation. E.g.: - * z = c1*x1 + c2*x2 + c3*x3 - */ - coefficients = <1200 -345 890>; - - sustainable-power = <2500>; - - trips { - /* Trips are based on resulting linear equation */ - cpu_trip: cpu-trip { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - gpu_trip: gpu-trip { - temperature = <55000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - } - lcd_trip: lcp-trip { - temperature = <53000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - crit_trip: crit-trip { - temperature = <68000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_trip>; - cooling-device = <&cpu0 0 2>; - contribution = <55>; - }; - map1 { - trip = <&gpu_trip>; - cooling-device = <&gpu0 0 2>; - contribution = <20>; - }; - map2 { - trip = <&lcd_trip>; - cooling-device = <&lcd0 5 10>; - contribution = <15>; - }; - }; - }; -}; - -The above example is a mix of previous examples, a sensor IP with several internal -sensors used to monitor different zones, one of them is composed by several sensors and -with different cooling devices. diff --git a/MAINTAINERS b/MAINTAINERS index 5511d95b9393..a45fe1a6251e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17086,6 +17086,14 @@ F: drivers/thermal/cpufreq_cooling.c F: drivers/thermal/cpuidle_cooling.c F: include/linux/cpu_cooling.h +THERMAL/POWER_ALLOCATOR +M: Lukasz Luba <lukasz.luba@arm.com> +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/driver-api/thermal/power_allocator.rst +F: drivers/thermal/gov_power_allocator.c +F: include/trace/events/thermal_power_allocator.h + THINKPAD ACPI EXTRAS DRIVER M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> L: ibm-acpi-devel@lists.sourceforge.net diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 19067a5e5293..12c0ece746f0 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -172,7 +172,6 @@ struct acpi_thermal { struct acpi_thermal_trips trips; struct acpi_handle_list devices; struct thermal_zone_device *thermal_zone; - int tz_enabled; int kelvin_offset; /* in millidegrees */ struct work_struct thermal_check_work; }; @@ -500,9 +499,6 @@ static void acpi_thermal_check(void *data) { struct acpi_thermal *tz = data; - if (!tz->tz_enabled) - return; - thermal_zone_device_update(tz->thermal_zone, THERMAL_EVENT_UNSPECIFIED); } @@ -526,50 +522,6 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp) return 0; } -static int thermal_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) -{ - struct acpi_thermal *tz = thermal->devdata; - - if (!tz) - return -EINVAL; - - *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED : - THERMAL_DEVICE_DISABLED; - - return 0; -} - -static int thermal_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) -{ - struct acpi_thermal *tz = thermal->devdata; - int enable; - - if (!tz) - return -EINVAL; - - /* - * enable/disable thermal management from ACPI thermal driver - */ - if (mode == THERMAL_DEVICE_ENABLED) - enable = 1; - else if (mode == THERMAL_DEVICE_DISABLED) { - enable = 0; - pr_warn("thermal zone will be disabled\n"); - } else - return -EINVAL; - - if (enable != tz->tz_enabled) { - tz->tz_enabled = enable; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "%s kernel ACPI thermal control\n", - tz->tz_enabled ? "Enable" : "Disable")); - acpi_thermal_check(tz); - } - return 0; -} - static int thermal_get_trip_type(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type *type) { @@ -856,8 +808,6 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = { .bind = acpi_thermal_bind_cooling_device, .unbind = acpi_thermal_unbind_cooling_device, .get_temp = thermal_get_temp, - .get_mode = thermal_get_mode, - .set_mode = thermal_set_mode, .get_trip_type = thermal_get_trip_type, .get_trip_temp = thermal_get_trip_temp, .get_crit_temp = thermal_get_crit_temp, @@ -901,23 +851,39 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) result = sysfs_create_link(&tz->device->dev.kobj, &tz->thermal_zone->device.kobj, "thermal_zone"); if (result) - return result; + goto unregister_tzd; result = sysfs_create_link(&tz->thermal_zone->device.kobj, &tz->device->dev.kobj, "device"); if (result) - return result; + goto remove_tz_link; status = acpi_bus_attach_private_data(tz->device->handle, tz->thermal_zone); - if (ACPI_FAILURE(status)) - return -ENODEV; + if (ACPI_FAILURE(status)) { + result = -ENODEV; + goto remove_dev_link; + } - tz->tz_enabled = 1; + result = thermal_zone_device_enable(tz->thermal_zone); + if (result) + goto acpi_bus_detach; dev_info(&tz->device->dev, "registered as thermal_zone%d\n", tz->thermal_zone->id); + return 0; + +acpi_bus_detach: + acpi_bus_detach_private_data(tz->device->handle); +remove_dev_link: + sysfs_remove_link(&tz->thermal_zone->device.kobj, "device"); +remove_tz_link: + sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone"); +unregister_tzd: + thermal_zone_device_unregister(tz->thermal_zone); + + return result; } static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c index 3de8a5e83b6c..e3510e9b21f3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c @@ -92,6 +92,14 @@ int cxgb4_thermal_init(struct adapter *adap) ch_thermal->tzdev = NULL; return ret; } + + ret = thermal_zone_device_enable(ch_thermal->tzdev); + if (ret) { + dev_err(adap->pdev_dev, "Failed to enable thermal zone\n"); + thermal_zone_device_unregister(adap->ch_thermal.tzdev); + return ret; + } + return 0; } diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c index 05f8d5a92862..8fa286ccdd6b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c @@ -98,7 +98,6 @@ struct mlxsw_thermal_module { struct mlxsw_thermal *parent; struct thermal_zone_device *tzdev; struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS]; - enum thermal_device_mode mode; int module; /* Module or gearbox number */ }; @@ -110,7 +109,6 @@ struct mlxsw_thermal { struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX]; u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1]; struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS]; - enum thermal_device_mode mode; struct mlxsw_thermal_module *tz_module_arr; u8 tz_module_num; struct mlxsw_thermal_module *tz_gearbox_arr; @@ -277,36 +275,6 @@ static int mlxsw_thermal_unbind(struct thermal_zone_device *tzdev, return 0; } -static int mlxsw_thermal_get_mode(struct thermal_zone_device *tzdev, - enum thermal_device_mode *mode) -{ - struct mlxsw_thermal *thermal = tzdev->devdata; - - *mode = thermal->mode; - - return 0; -} - -static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev, - enum thermal_device_mode mode) -{ - struct mlxsw_thermal *thermal = tzdev->devdata; - - mutex_lock(&tzdev->lock); - - if (mode == THERMAL_DEVICE_ENABLED) - tzdev->polling_delay = thermal->polling_delay; - else - tzdev->polling_delay = 0; - - mutex_unlock(&tzdev->lock); - - thermal->mode = mode; - thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED); - - return 0; -} - static int mlxsw_thermal_get_temp(struct thermal_zone_device *tzdev, int *p_temp) { @@ -406,8 +374,6 @@ static int mlxsw_thermal_trend_get(struct thermal_zone_device *tzdev, static struct thermal_zone_device_ops mlxsw_thermal_ops = { .bind = mlxsw_thermal_bind, .unbind = mlxsw_thermal_unbind, - .get_mode = mlxsw_thermal_get_mode, - .set_mode = mlxsw_thermal_set_mode, .get_temp = mlxsw_thermal_get_temp, .get_trip_type = mlxsw_thermal_get_trip_type, .get_trip_temp = mlxsw_thermal_get_trip_temp, @@ -465,37 +431,6 @@ static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev, return err; } -static int mlxsw_thermal_module_mode_get(struct thermal_zone_device *tzdev, - enum thermal_device_mode *mode) -{ - struct mlxsw_thermal_module *tz = tzdev->devdata; - - *mode = tz->mode; - - return 0; -} - -static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev, - enum thermal_device_mode mode) -{ - struct mlxsw_thermal_module *tz = tzdev->devdata; - struct mlxsw_thermal *thermal = tz->parent; - - mutex_lock(&tzdev->lock); - - if (mode == THERMAL_DEVICE_ENABLED) - tzdev->polling_delay = thermal->polling_delay; - else - tzdev->polling_delay = 0; - - mutex_unlock(&tzdev->lock); - - tz->mode = mode; - thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED); - - return 0; -} - static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev, int *p_temp) { @@ -611,8 +546,6 @@ static int mlxsw_thermal_module_trend_get(struct thermal_zone_device *tzdev, static struct thermal_zone_device_ops mlxsw_thermal_module_ops = { .bind = mlxsw_thermal_module_bind, .unbind = mlxsw_thermal_module_unbind, - .get_mode = mlxsw_thermal_module_mode_get, - .set_mode = mlxsw_thermal_module_mode_set, .get_temp = mlxsw_thermal_module_temp_get, .get_trip_type = mlxsw_thermal_module_trip_type_get, .get_trip_temp = mlxsw_thermal_module_trip_temp_get, @@ -650,8 +583,6 @@ static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev, static struct thermal_zone_device_ops mlxsw_thermal_gearbox_ops = { .bind = mlxsw_thermal_module_bind, .unbind = mlxsw_thermal_module_unbind, - .get_mode = mlxsw_thermal_module_mode_get, - .set_mode = mlxsw_thermal_module_mode_set, .get_temp = mlxsw_thermal_gearbox_temp_get, .get_trip_type = mlxsw_thermal_module_trip_type_get, .get_trip_temp = mlxsw_thermal_module_trip_temp_get, @@ -780,8 +711,11 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz) return err; } - module_tz->mode = THERMAL_DEVICE_ENABLED; - return 0; + err = thermal_zone_device_enable(module_tz->tzdev); + if (err) + thermal_zone_device_unregister(module_tz->tzdev); + + return err; } static void mlxsw_thermal_module_tz_fini(struct thermal_zone_device *tzdev) @@ -884,6 +818,7 @@ static int mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz) { char tz_name[MLXSW_THERMAL_ZONE_MAX_NAME]; + int ret; snprintf(tz_name, sizeof(tz_name), "mlxsw-gearbox%d", gearbox_tz->module + 1); @@ -896,8 +831,11 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz) if (IS_ERR(gearbox_tz->tzdev)) return PTR_ERR(gearbox_tz->tzdev); - gearbox_tz->mode = THERMAL_DEVICE_ENABLED; - return 0; + ret = thermal_zone_device_enable(gearbox_tz->tzdev); + if (ret) + thermal_zone_device_unregister(gearbox_tz->tzdev); + + return ret; } static void @@ -1065,10 +1003,15 @@ int mlxsw_thermal_init(struct mlxsw_core *core, if (err) goto err_unreg_modules_tzdev; - thermal->mode = THERMAL_DEVICE_ENABLED; + err = thermal_zone_device_enable(thermal->tzdev); + if (err) + goto err_unreg_gearboxes; + *p_thermal = thermal; return 0; +err_unreg_gearboxes: + mlxsw_thermal_gearboxes_fini(thermal); err_unreg_modules_tzdev: mlxsw_thermal_modules_fini(thermal); err_unreg_tzdev: diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index 418e59b7c671..0c95663bf9ed 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -733,7 +733,7 @@ static struct thermal_zone_device_ops tzone_ops = { static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm) { - int i; + int i, ret; char name[16]; static atomic_t counter = ATOMIC_INIT(0); @@ -759,6 +759,13 @@ static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm) return; } + ret = thermal_zone_device_enable(mvm->tz_device.tzone); + if (ret) { + IWL_DEBUG_TEMP(mvm, "Failed to enable thermal zone\n"); + thermal_zone_device_unregister(mvm->tz_device.tzone); + return; + } + /* 0 is a valid temperature, * so initialize the array with S16_MIN which invalid temperature */ diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index a7a0b2e0ceb9..44b6bfbd32df 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -397,39 +397,24 @@ static inline void acerhdf_revert_to_bios_mode(void) { acerhdf_change_fanstate(ACERHDF_FAN_AUTO); kernelmode = 0; - if (thz_dev) - thz_dev->polling_delay = 0; + pr_notice("kernel mode fan control OFF\n"); } static inline void acerhdf_enable_kernelmode(void) { kernelmode = 1; - thz_dev->polling_delay = interval*1000; - thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED); pr_notice("kernel mode fan control ON\n"); } -static int acerhdf_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) -{ - if (verbose) - pr_notice("kernel mode fan control %d\n", kernelmode); - - *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED - : THERMAL_DEVICE_DISABLED; - - return 0; -} - /* * set operation mode; * enabled: the thermal layer of the kernel takes care about * the temperature and the fan. * disabled: the BIOS takes control of the fan. */ -static int acerhdf_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) +static int acerhdf_change_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) { if (mode == THERMAL_DEVICE_DISABLED && kernelmode) acerhdf_revert_to_bios_mode(); @@ -488,8 +473,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = { .bind = acerhdf_bind, .unbind = acerhdf_unbind, .get_temp = acerhdf_get_ec_temp, - .get_mode = acerhdf_get_mode, - .set_mode = acerhdf_set_mode, + .change_mode = acerhdf_change_mode, .get_trip_type = acerhdf_get_trip_type, .get_trip_hyst = acerhdf_get_trip_hyst, .get_trip_temp = acerhdf_get_trip_temp, @@ -733,6 +717,8 @@ static void acerhdf_unregister_platform(void) static int __init acerhdf_register_thermal(void) { + int ret; + cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL, &acerhdf_cooling_ops); @@ -746,6 +732,13 @@ static int __init acerhdf_register_thermal(void) if (IS_ERR(thz_dev)) return -EINVAL; + if (kernelmode) + ret = thermal_zone_device_enable(thz_dev); + else + ret = thermal_zone_device_disable(thz_dev); + if (ret) + return ret; + if (strcmp(thz_dev->governor->name, acerhdf_zone_params.governor_name)) { pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n", diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index f402e2e74a38..f12f4e7bd971 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -493,6 +493,12 @@ static int mid_thermal_probe(struct platform_device *pdev) ret = PTR_ERR(pinfo->tzd[i]); goto err; } + ret = thermal_zone_device_enable(pinfo->tzd[i]); + if (ret) { + kfree(td_info); + thermal_zone_device_unregister(pinfo->tzd[i]); + goto err; + } } pinfo->pdev = pdev; diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index 02b37fe6061c..90e56736d479 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -939,7 +939,7 @@ static struct thermal_zone_device_ops psy_tzd_ops = { static int psy_register_thermal(struct power_supply *psy) { - int i; + int i, ret; if (psy->desc->no_thermal) return 0; @@ -949,7 +949,12 @@ static int psy_register_thermal(struct power_supply *psy) if (psy->desc->properties[i] == POWER_SUPPLY_PROP_TEMP) { psy->tzd = thermal_zone_device_register(psy->desc->name, 0, 0, psy, &psy_tzd_ops, NULL, 0, 0); - return PTR_ERR_OR_ZERO(psy->tzd); + if (IS_ERR(psy->tzd)) + return PTR_ERR(psy->tzd); + ret = thermal_zone_device_enable(psy->tzd); + if (ret) + thermal_zone_device_unregister(psy->tzd); + return ret; } } return 0; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 3eb2348e5242..13991d68c844 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -17,6 +17,16 @@ menuconfig THERMAL if THERMAL +config THERMAL_NETLINK + bool "Thermal netlink management" + depends on NET + default y + help + The thermal framework has a netlink interface to do thermal + zones discovery, temperature readings and events such as + trip point crossed, cooling device update or governor + change. It is recommended to enable the feature. + config THERMAL_STATISTICS bool "Thermal state transition statistics" help @@ -180,16 +190,6 @@ config CPU_IDLE_THERMAL idle cycle. endif -config CLOCK_THERMAL - bool "Generic clock cooling support" - depends on COMMON_CLK - depends on PM_OPP - help - This entry implements the generic clock cooling mechanism through - frequency clipping. Typically used to cool off co-processors. The - device that is configured to use this cooling mechanism will be - controlled to reduce clock frequency whenever temperature is high. - config DEVFREQ_THERMAL bool "Generic device cooling support" depends on PM_DEVFREQ diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 0c8b84a09b9a..b8d96d26f9ec 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -7,6 +7,9 @@ obj-$(CONFIG_THERMAL) += thermal_sys.o thermal_sys-y += thermal_core.o thermal_sysfs.o \ thermal_helpers.o +# netlink interface to manage the thermal framework +thermal_sys-$(CONFIG_THERMAL_NETLINK) += thermal_netlink.o + # interface to/from other layers providing sensors thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o thermal_sys-$(CONFIG_THERMAL_OF) += thermal_of.o @@ -22,9 +25,6 @@ thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += gov_power_allocator.o thermal_sys-$(CONFIG_CPU_FREQ_THERMAL) += cpufreq_cooling.o thermal_sys-$(CONFIG_CPU_IDLE_THERMAL) += cpuidle_cooling.o -# clock cooling -thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o - # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 7c447cd149e7..c2ebfb5be4b3 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -874,6 +874,12 @@ static int armada_thermal_probe(struct platform_device *pdev) return PTR_ERR(tz); } + ret = thermal_zone_device_enable(tz); + if (ret) { + thermal_zone_device_unregister(tz); + return ret; + } + drvdata->type = LEGACY; drvdata->data.tz = tz; platform_set_drvdata(pdev, drvdata); diff --git a/drivers/thermal/clock_cooling.c b/drivers/thermal/clock_cooling.c deleted file mode 100644 index 56cb1f46a428..000000000000 --- a/drivers/thermal/clock_cooling.c +++ /dev/null @@ -1,445 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/thermal/clock_cooling.c - * - * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com> - * - * Copyright (C) 2013 Texas Instruments Inc. - * Contact: Eduardo Valentin <eduardo.valentin@ti.com> - * - * Highly based on cpufreq_cooling.c. - * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) - * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> - */ -#include <linux/clk.h> -#include <linux/clock_cooling.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/export.h> -#include <linux/idr.h> -#include <linux/mutex.h> -#include <linux/pm_opp.h> -#include <linux/slab.h> -#include <linux/thermal.h> - -/** - * struct clock_cooling_device - data for cooling device with clock - * @id: unique integer value corresponding to each clock_cooling_device - * registered. - * @dev: struct device pointer to the device being used to cool off using - * clock frequencies. - * @cdev: thermal_cooling_device pointer to keep track of the - * registered cooling device. - * @clk_rate_change_nb: reference to notifier block used to receive clock - * rate changes. - * @freq_table: frequency table used to keep track of available frequencies. - * @clock_state: integer value representing the current state of clock - * cooling devices. - * @clock_val: integer value representing the absolute value of the clipped - * frequency. - * @clk: struct clk reference used to enforce clock limits. - * @lock: mutex lock to protect this struct. - * - * This structure is required for keeping information of each - * clock_cooling_device registered. In order to prevent corruption of this a - * mutex @lock is used. - */ -struct clock_cooling_device { - int id; - struct device *dev; - struct thermal_cooling_device *cdev; - struct notifier_block clk_rate_change_nb; - struct cpufreq_frequency_table *freq_table; - unsigned long clock_state; - unsigned long clock_val; - struct clk *clk; - struct mutex lock; /* lock to protect the content of this struct */ -}; -#define to_clock_cooling_device(x) \ - container_of(x, struct clock_cooling_device, clk_rate_change_nb) -static DEFINE_IDA(clock_ida); - -/* Below code defines functions to be used for clock as cooling device */ - -enum clock_cooling_property { - GET_LEVEL, - GET_FREQ, - GET_MAXL, -}; - -/** - * clock_cooling_get_property - fetch a property of interest for a give cpu. - * @ccdev: clock cooling device reference - * @input: query parameter - * @output: query return - * @property: type of query (frequency, level, max level) - * - * This is the common function to - * 1. get maximum clock cooling states - * 2. translate frequency to cooling state - * 3. translate cooling state to frequency - * Note that the code may be not in good shape - * but it is written in this way in order to: - * a) reduce duplicate code as most of the code can be shared. - * b) make sure the logic is consistent when translating between - * cooling states and frequencies. - * - * Return: 0 on success, -EINVAL when invalid parameters are passed. - */ -static int clock_cooling_get_property(struct clock_cooling_device *ccdev, - unsigned long input, - unsigned long *output, - enum clock_cooling_property property) -{ - int i; - unsigned long max_level = 0, level = 0; - unsigned int freq = CPUFREQ_ENTRY_INVALID; - int descend = -1; - struct cpufreq_frequency_table *pos, *table = ccdev->freq_table; - - if (!output) - return -EINVAL; - - if (!table) - return -EINVAL; - - cpufreq_for_each_valid_entry(pos, table) { - /* ignore duplicate entry */ - if (freq == pos->frequency) - continue; - - /* get the frequency order */ - if (freq != CPUFREQ_ENTRY_INVALID && descend == -1) - descend = freq > pos->frequency; - - freq = pos->frequency; - max_level++; - } - - /* No valid cpu frequency entry */ - if (max_level == 0) - return -EINVAL; - - /* max_level is an index, not a counter */ - max_level--; - - /* get max level */ - if (property == GET_MAXL) { - *output = max_level; - return 0; - } - - if (property == GET_FREQ) - level = descend ? input : (max_level - input); - - i = 0; - cpufreq_for_each_valid_entry(pos, table) { - /* ignore duplicate entry */ - if (freq == pos->frequency) - continue; - - /* now we have a valid frequency entry */ - freq = pos->frequency; - - if (property == GET_LEVEL && (unsigned int)input == freq) { - /* get level by frequency */ - *output = descend ? i : (max_level - i); - return 0; - } - if (property == GET_FREQ && level == i) { - /* get frequency by level */ - *output = freq; - return 0; - } - i++; - } - - return -EINVAL; -} - -/** - * clock_cooling_get_level - return the cooling level of given clock cooling. - * @cdev: reference of a thermal cooling device of used as clock cooling device - * @freq: the frequency of interest - * - * This function will match the cooling level corresponding to the - * requested @freq and return it. - * - * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID - * otherwise. - */ -unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, - unsigned long freq) -{ - struct clock_cooling_device *ccdev = cdev->devdata; - unsigned long val; - - if (clock_cooling_get_property(ccdev, (unsigned long)freq, &val, - GET_LEVEL)) - return THERMAL_CSTATE_INVALID; - - return val; -} -EXPORT_SYMBOL_GPL(clock_cooling_get_level); - -/** - * clock_cooling_get_frequency - get the absolute value of frequency from level. - * @ccdev: clock cooling device reference - * @level: cooling level - * - * This function matches cooling level with frequency. Based on a cooling level - * of frequency, equals cooling state of cpu cooling device, it will return - * the corresponding frequency. - * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc - * - * Return: 0 on error, the corresponding frequency otherwise. - */ -static unsigned long -clock_cooling_get_frequency(struct clock_cooling_device *ccdev, - unsigned long level) -{ - int ret = 0; - unsigned long freq; - - ret = clock_cooling_get_property(ccdev, level, &freq, GET_FREQ); - if (ret) - return 0; - - return freq; -} - -/** - * clock_cooling_apply - function to apply frequency clipping. - * @ccdev: clock_cooling_device pointer containing frequency clipping data. - * @cooling_state: value of the cooling state. - * - * Function used to make sure the clock layer is aware of current thermal - * limits. The limits are applied by updating the clock rate in case it is - * higher than the corresponding frequency based on the requested cooling_state. - * - * Return: 0 on success, an error code otherwise (-EINVAL in case wrong - * cooling state). - */ -static int clock_cooling_apply(struct clock_cooling_device *ccdev, - unsigned long cooling_state) -{ - unsigned long clip_freq, cur_freq; - int ret = 0; - - /* Here we write the clipping */ - /* Check if the old cooling action is same as new cooling action */ - if (ccdev->clock_state == cooling_state) - return 0; - - clip_freq = clock_cooling_get_frequency(ccdev, cooling_state); - if (!clip_freq) - return -EINVAL; - - cur_freq = clk_get_rate(ccdev->clk); - - mutex_lock(&ccdev->lock); - ccdev->clock_state = cooling_state; - ccdev->clock_val = clip_freq; - /* enforce clock level */ - if (cur_freq > clip_freq) - ret = clk_set_rate(ccdev->clk, clip_freq); - mutex_unlock(&ccdev->lock); - - return ret; -} - -/** - * clock_cooling_clock_notifier - notifier callback on clock rate changes. - * @nb: struct notifier_block * with callback info. - * @event: value showing clock event for which this function invoked. - * @data: callback-specific data - * - * Callback to hijack the notification on clock transition. - * Every time there is a clock change, we intercept all pre change events - * and block the transition in case the new rate infringes thermal limits. - * - * Return: NOTIFY_DONE (success) or NOTIFY_BAD (new_rate > thermal limit). - */ -static int clock_cooling_clock_notifier(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct clk_notifier_data *ndata = data; - struct clock_cooling_device *ccdev = to_clock_cooling_device(nb); - - switch (event) { - case PRE_RATE_CHANGE: - /* - * checks on current state - * TODO: current method is not best we can find as it - * allows possibly voltage transitions, in case DVFS - * layer is also hijacking clock pre notifications. - */ - if (ndata->new_rate > ccdev->clock_val) - return NOTIFY_BAD; - /* fall through */ - case POST_RATE_CHANGE: - case ABORT_RATE_CHANGE: - default: - return NOTIFY_DONE; - } -} - -/* clock cooling device thermal callback functions are defined below */ - -/** - * clock_cooling_get_max_state - callback function to get the max cooling state. - * @cdev: thermal cooling device pointer. - * @state: fill this variable with the max cooling state. - * - * Callback for the thermal cooling device to return the clock - * max cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int clock_cooling_get_max_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct clock_cooling_device *ccdev = cdev->devdata; - unsigned long count = 0; - int ret; - - ret = clock_cooling_get_property(ccdev, 0, &count, GET_MAXL); - if (!ret) - *state = count; - - return ret; -} - -/** - * clock_cooling_get_cur_state - function to get the current cooling state. - * @cdev: thermal cooling device pointer. - * @state: fill this variable with the current cooling state. - * - * Callback for the thermal cooling device to return the clock - * current cooling state. - * - * Return: 0 (success) - */ -static int clock_cooling_get_cur_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct clock_cooling_device *ccdev = cdev->devdata; - - *state = ccdev->clock_state; - - return 0; -} - -/** - * clock_cooling_set_cur_state - function to set the current cooling state. - * @cdev: thermal cooling device pointer. - * @state: set this variable to the current cooling state. - * - * Callback for the thermal cooling device to change the clock cooling - * current cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int clock_cooling_set_cur_state(struct thermal_cooling_device *cdev, - unsigned long state) -{ - struct clock_cooling_device *clock_device = cdev->devdata; - - return clock_cooling_apply(clock_device, state); -} - -/* Bind clock callbacks to thermal cooling device ops */ -static struct thermal_cooling_device_ops const clock_cooling_ops = { - .get_max_state = clock_cooling_get_max_state, - .get_cur_state = clock_cooling_get_cur_state, - .set_cur_state = clock_cooling_set_cur_state, -}; - -/** - * clock_cooling_register - function to create clock cooling device. - * @dev: struct device pointer to the device used as clock cooling device. - * @clock_name: string containing the clock used as cooling mechanism. - * - * This interface function registers the clock cooling device with the name - * "thermal-clock-%x". The cooling device is based on clock frequencies. - * The struct device is assumed to be capable of DVFS transitions. - * The OPP layer is used to fetch and fill the available frequencies for - * the referred device. The ordered frequency table is used to control - * the clock cooling device cooling states and to limit clock transitions - * based on the cooling state requested by the thermal framework. - * - * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). - */ -struct thermal_cooling_device * -clock_cooling_register(struct device *dev, const char *clock_name) -{ - struct thermal_cooling_device *cdev; - struct clock_cooling_device *ccdev = NULL; - char dev_name[THERMAL_NAME_LENGTH]; - int ret = 0; - - ccdev = devm_kzalloc(dev, sizeof(*ccdev), GFP_KERNEL); - if (!ccdev) - return ERR_PTR(-ENOMEM); - - mutex_init(&ccdev->lock); - ccdev->dev = dev; - ccdev->clk = devm_clk_get(dev, clock_name); - if (IS_ERR(ccdev->clk)) - return ERR_CAST(ccdev->clk); - - ret = ida_simple_get(&clock_ida, 0, 0, GFP_KERNEL); - if (ret < 0) - return ERR_PTR(ret); - ccdev->id = ret; - - snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id); - - cdev = thermal_cooling_device_register(dev_name, ccdev, - &clock_cooling_ops); - if (IS_ERR(cdev)) { - ida_simple_remove(&clock_ida, ccdev->id); - return ERR_PTR(-EINVAL); - } - ccdev->cdev = cdev; - ccdev->clk_rate_change_nb.notifier_call = clock_cooling_clock_notifier; - - /* Assuming someone has already filled the opp table for this device */ - ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table); - if (ret) { - ida_simple_remove(&clock_ida, ccdev->id); - return ERR_PTR(ret); - } - ccdev->clock_state = 0; - ccdev->clock_val = clock_cooling_get_frequency(ccdev, 0); - - clk_notifier_register(ccdev->clk, &ccdev->clk_rate_change_nb); - - return cdev; -} -EXPORT_SYMBOL_GPL(clock_cooling_register); - -/** - * clock_cooling_unregister - function to remove clock cooling device. - * @cdev: thermal cooling device pointer. - * - * This interface function unregisters the "thermal-clock-%x" cooling device. - */ -void clock_cooling_unregister(struct thermal_cooling_device *cdev) -{ - struct clock_cooling_device *ccdev; - - if (!cdev) - return; - - ccdev = cdev->devdata; - - clk_notifier_unregister(ccdev->clk, &ccdev->clk_rate_change_nb); - dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table); - - thermal_cooling_device_unregister(ccdev->cdev); - ida_simple_remove(&clock_ida, ccdev->id); -} -EXPORT_SYMBOL_GPL(clock_cooling_unregister); diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c index c32709badeda..4d74994f160a 100644 --- a/drivers/thermal/da9062-thermal.c +++ b/drivers/thermal/da9062-thermal.c @@ -49,7 +49,6 @@ struct da9062_thermal { struct da9062 *hw; struct delayed_work work; struct thermal_zone_device *zone; - enum thermal_device_mode mode; struct mutex lock; /* protection for da9062_thermal temperature */ int temperature; int irq; @@ -121,14 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data) return IRQ_HANDLED; } -static int da9062_thermal_get_mode(struct thermal_zone_device *z, - enum thermal_device_mode *mode) -{ - struct da9062_thermal *thermal = z->devdata; - *mode = thermal->mode; - return 0; -} - static int da9062_thermal_get_trip_type(struct thermal_zone_device *z, int trip, enum thermal_trip_type *type) @@ -181,7 +172,6 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z, static struct thermal_zone_device_ops da9062_thermal_ops = { .get_temp = da9062_thermal_get_temp, - .get_mode = da9062_thermal_get_mode, .get_trip_type = da9062_thermal_get_trip_type, .get_trip_temp = da9062_thermal_get_trip_temp, }; @@ -233,7 +223,6 @@ static int da9062_thermal_probe(struct platform_device *pdev) thermal->config = match->data; thermal->hw = chip; - thermal->mode = THERMAL_DEVICE_ENABLED; thermal->dev = &pdev->dev; INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on); @@ -248,6 +237,11 @@ static int da9062_thermal_probe(struct platform_device *pdev) ret = PTR_ERR(thermal->zone); goto err; } + ret = thermal_zone_device_enable(thermal->zone); + if (ret) { + dev_err(&pdev->dev, "Cannot enable thermal zone device\n"); + goto err_zone; + } dev_dbg(&pdev->dev, "TJUNC temperature polling period set at %d ms\n", diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index f7f32e98331b..a12d29096229 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * devfreq_cooling: Thermal cooling device implementation for devices using * devfreq * * Copyright (C) 2014-2015 ARM Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * * TODO: * - If OPPs are added or removed after devfreq cooling has * registered, the devfreq cooling won't react to it. diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index 75901ced4a62..73182eb94bc0 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -153,6 +153,12 @@ static int dove_thermal_probe(struct platform_device *pdev) return PTR_ERR(thermal); } + ret = thermal_zone_device_enable(thermal); + if (ret) { + thermal_zone_device_unregister(thermal); + return ret; + } + platform_set_drvdata(pdev, thermal); return 0; diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c index 44636475b2a3..5cb518d8f156 100644 --- a/drivers/thermal/gov_power_allocator.c +++ b/drivers/thermal/gov_power_allocator.c @@ -1,16 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * A power allocator to manage temperature * * Copyright (C) 2014 ARM Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #define pr_fmt(fmt) "Power allocator: " fmt diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 2d26ae80e202..ee05950afd2f 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -549,8 +549,10 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor, { struct thermal_zone_device *tzd = sensor->tzd; - tzd->ops->set_mode(tzd, - on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED); + if (on) + thermal_zone_device_enable(tzd); + else + thermal_zone_device_disable(tzd); } static int hisi_thermal_probe(struct platform_device *pdev) diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c index e6061e26d4ac..f5124f14cf81 100644 --- a/drivers/thermal/imx8mm_thermal.c +++ b/drivers/thermal/imx8mm_thermal.c @@ -220,6 +220,7 @@ static const struct of_device_id imx8mm_tmu_table[] = { { .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, }, { }, }; +MODULE_DEVICE_TABLE(of, imx8mm_tmu_table); static struct platform_driver imx8mm_tmu = { .driver = { diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 1b84ea674edb..3f74ab4c1ab9 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -197,7 +197,6 @@ struct imx_thermal_data { struct cpufreq_policy *policy; struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; - enum thermal_device_mode mode; struct regmap *tempmon; u32 c1, c2; /* See formula in imx_init_calib() */ int temp_passive; @@ -253,10 +252,11 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) const struct thermal_soc_data *soc_data = data->socdata; struct regmap *map = data->tempmon; unsigned int n_meas; - bool wait; + bool wait, run_measurement; u32 val; - if (data->mode == THERMAL_DEVICE_ENABLED) { + run_measurement = !data->irq_enabled; + if (!run_measurement) { /* Check if a measurement is currently in progress */ regmap_read(map, soc_data->temp_data, &val); wait = !(val & soc_data->temp_valid_mask); @@ -283,7 +283,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) regmap_read(map, soc_data->temp_data, &val); - if (data->mode != THERMAL_DEVICE_ENABLED) { + if (run_measurement) { regmap_write(map, soc_data->sensor_ctrl + REG_CLR, soc_data->measure_temp_mask); regmap_write(map, soc_data->sensor_ctrl + REG_SET, @@ -331,27 +331,14 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) return 0; } -static int imx_get_mode(struct thermal_zone_device *tz, - enum thermal_device_mode *mode) -{ - struct imx_thermal_data *data = tz->devdata; - - *mode = data->mode; - - return 0; -} - -static int imx_set_mode(struct thermal_zone_device *tz, - enum thermal_device_mode mode) +static int imx_change_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) { struct imx_thermal_data *data = tz->devdata; struct regmap *map = data->tempmon; const struct thermal_soc_data *soc_data = data->socdata; if (mode == THERMAL_DEVICE_ENABLED) { - tz->polling_delay = IMX_POLLING_DELAY; - tz->passive_delay = IMX_PASSIVE_DELAY; - regmap_write(map, soc_data->sensor_ctrl + REG_CLR, soc_data->power_down_mask); regmap_write(map, soc_data->sensor_ctrl + REG_SET, @@ -367,18 +354,12 @@ static int imx_set_mode(struct thermal_zone_device *tz, regmap_write(map, soc_data->sensor_ctrl + REG_SET, soc_data->power_down_mask); - tz->polling_delay = 0; - tz->passive_delay = 0; - if (data->irq_enabled) { disable_irq(data->irq); data->irq_enabled = false; } } - data->mode = mode; - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - return 0; } @@ -467,8 +448,7 @@ static struct thermal_zone_device_ops imx_tz_ops = { .bind = imx_bind, .unbind = imx_unbind, .get_temp = imx_get_temp, - .get_mode = imx_get_mode, - .set_mode = imx_set_mode, + .change_mode = imx_change_mode, .get_trip_type = imx_get_trip_type, .get_trip_temp = imx_get_trip_temp, .get_crit_temp = imx_get_crit_temp, @@ -832,7 +812,9 @@ static int imx_thermal_probe(struct platform_device *pdev) data->socdata->measure_temp_mask); data->irq_enabled = true; - data->mode = THERMAL_DEVICE_ENABLED; + ret = thermal_zone_device_enable(data->tz); + if (ret) + goto thermal_zone_unregister; ret = devm_request_threaded_irq(&pdev->dev, data->irq, imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread, @@ -874,19 +856,18 @@ static int imx_thermal_remove(struct platform_device *pdev) static int __maybe_unused imx_thermal_suspend(struct device *dev) { struct imx_thermal_data *data = dev_get_drvdata(dev); - struct regmap *map = data->tempmon; + int ret; /* * Need to disable thermal sensor, otherwise, when thermal core * try to get temperature before thermal sensor resume, a wrong * temperature will be read as the thermal sensor is powered - * down. + * down. This is done in change_mode() operation called from + * thermal_zone_device_disable() */ - regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, - data->socdata->measure_temp_mask); - regmap_write(map, data->socdata->sensor_ctrl + REG_SET, - data->socdata->power_down_mask); - data->mode = THERMAL_DEVICE_DISABLED; + ret = thermal_zone_device_disable(data->tz); + if (ret) + return ret; clk_disable_unprepare(data->thermal_clk); return 0; @@ -895,18 +876,15 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev) static int __maybe_unused imx_thermal_resume(struct device *dev) { struct imx_thermal_data *data = dev_get_drvdata(dev); - struct regmap *map = data->tempmon; int ret; ret = clk_prepare_enable(data->thermal_clk); if (ret) return ret; /* Enabled thermal sensor after resume */ - regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, - data->socdata->power_down_mask); - regmap_write(map, data->socdata->sensor_ctrl + REG_SET, - data->socdata->measure_temp_mask); - data->mode = THERMAL_DEVICE_ENABLED; + ret = thermal_zone_device_enable(data->tz); + if (ret) + return ret; return 0; } diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c index 12448ccd27f1..4f5859d4c780 100644 --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c @@ -48,7 +48,6 @@ struct int3400_thermal_priv { struct acpi_device *adev; struct platform_device *pdev; struct thermal_zone_device *thermal; - int mode; int art_count; struct art *arts; int trt_count; @@ -383,42 +382,20 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, return 0; } -static int int3400_thermal_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) +static int int3400_thermal_change_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) { struct int3400_thermal_priv *priv = thermal->devdata; - - if (!priv) - return -EINVAL; - - *mode = priv->mode; - - return 0; -} - -static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) -{ - struct int3400_thermal_priv *priv = thermal->devdata; - bool enable; int result = 0; if (!priv) return -EINVAL; - if (mode == THERMAL_DEVICE_ENABLED) - enable = true; - else if (mode == THERMAL_DEVICE_DISABLED) - enable = false; - else - return -EINVAL; - - if (enable != priv->mode) { - priv->mode = enable; + if (mode != thermal->mode) result = int3400_thermal_run_osc(priv->adev->handle, - priv->current_uuid_index, - enable); - } + priv->current_uuid_index, + mode == THERMAL_DEVICE_ENABLED); + evaluate_odvp(priv); @@ -427,8 +404,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, static struct thermal_zone_device_ops int3400_thermal_ops = { .get_temp = int3400_thermal_get_temp, - .get_mode = int3400_thermal_get_mode, - .set_mode = int3400_thermal_set_mode, + .change_mode = int3400_thermal_change_mode, }; static struct thermal_zone_params int3400_thermal_params = { diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c index 432213272f1e..6e479deff76b 100644 --- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c +++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c @@ -259,9 +259,14 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev, ret = PTR_ERR(int34x_thermal_zone->zone); goto err_thermal_zone; } + ret = thermal_zone_device_enable(int34x_thermal_zone->zone); + if (ret) + goto err_enable; return int34x_thermal_zone; +err_enable: + thermal_zone_device_unregister(int34x_thermal_zone->zone); err_thermal_zone: acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table); kfree(int34x_thermal_zone->aux_trips); diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c index 297db1d2d960..81e8b15ef405 100644 --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c @@ -43,7 +43,7 @@ #define PCI_DEVICE_ID_PROC_ICL_THERMAL 0x8a03 /* JasperLake thermal reporting device */ -#define PCI_DEVICE_ID_PROC_JSL_THERMAL 0x4503 +#define PCI_DEVICE_ID_PROC_JSL_THERMAL 0x4E03 /* TigerLake thermal reporting device */ #define PCI_DEVICE_ID_PROC_TGL_THERMAL 0x9A03 diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c index 56401fd4708d..3b813ebb6ca1 100644 --- a/drivers/thermal/intel/intel_pch_thermal.c +++ b/drivers/thermal/intel/intel_pch_thermal.c @@ -24,6 +24,7 @@ #define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */ #define PCH_THERMAL_DID_CNL 0x9Df9 /* CNL PCH */ #define PCH_THERMAL_DID_CNL_H 0xA379 /* CNL-H PCH */ +#define PCH_THERMAL_DID_CNL_LP 0x02F9 /* CNL-LP PCH */ #define PCH_THERMAL_DID_CML_H 0X06F9 /* CML-H PCH */ /* Wildcat Point-LP PCH Thermal registers */ @@ -352,9 +353,14 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev, err = PTR_ERR(ptd->tzd); goto error_cleanup; } + err = thermal_zone_device_enable(ptd->tzd); + if (err) + goto err_unregister; return 0; +err_unregister: + thermal_zone_device_unregister(ptd->tzd); error_cleanup: iounmap(ptd->hw_base); error_release: @@ -405,6 +411,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_cnl, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H), .driver_data = board_cnl, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_LP), + .driver_data = board_cnl, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H), .driver_data = board_cml, }, { 0, }, diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c index d704fc104cfd..3eafc6b0e6c3 100644 --- a/drivers/thermal/intel/intel_quark_dts_thermal.c +++ b/drivers/thermal/intel/intel_quark_dts_thermal.c @@ -103,7 +103,6 @@ struct soc_sensor_entry { bool locked; u32 store_ptps; u32 store_dts_enable; - enum thermal_device_mode mode; struct thermal_zone_device *tzone; }; @@ -127,10 +126,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd) if (ret) return ret; - if (out & QRK_DTS_ENABLE_BIT) { - aux_entry->mode = THERMAL_DEVICE_ENABLED; + if (out & QRK_DTS_ENABLE_BIT) return 0; - } if (!aux_entry->locked) { out |= QRK_DTS_ENABLE_BIT; @@ -138,10 +135,7 @@ static int soc_dts_enable(struct thermal_zone_device *tzd) QRK_DTS_REG_OFFSET_ENABLE, out); if (ret) return ret; - - aux_entry->mode = THERMAL_DEVICE_ENABLED; } else { - aux_entry->mode = THERMAL_DEVICE_DISABLED; pr_info("DTS is locked. Cannot enable DTS\n"); ret = -EPERM; } @@ -160,10 +154,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd) if (ret) return ret; - if (!(out & QRK_DTS_ENABLE_BIT)) { - aux_entry->mode = THERMAL_DEVICE_DISABLED; + if (!(out & QRK_DTS_ENABLE_BIT)) return 0; - } if (!aux_entry->locked) { out &= ~QRK_DTS_ENABLE_BIT; @@ -172,10 +164,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd) if (ret) return ret; - - aux_entry->mode = THERMAL_DEVICE_DISABLED; } else { - aux_entry->mode = THERMAL_DEVICE_ENABLED; pr_info("DTS is locked. Cannot disable DTS\n"); ret = -EPERM; } @@ -309,16 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd, return 0; } -static int sys_get_mode(struct thermal_zone_device *tzd, - enum thermal_device_mode *mode) -{ - struct soc_sensor_entry *aux_entry = tzd->devdata; - *mode = aux_entry->mode; - return 0; -} - -static int sys_set_mode(struct thermal_zone_device *tzd, - enum thermal_device_mode mode) +static int sys_change_mode(struct thermal_zone_device *tzd, + enum thermal_device_mode mode) { int ret; @@ -338,8 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = { .get_trip_type = sys_get_trip_type, .set_trip_temp = sys_set_trip_temp, .get_crit_temp = sys_get_crit_temp, - .get_mode = sys_get_mode, - .set_mode = sys_set_mode, + .change_mode = sys_change_mode, }; static void free_soc_dts(struct soc_sensor_entry *aux_entry) @@ -414,9 +394,7 @@ static struct soc_sensor_entry *alloc_soc_dts(void) goto err_ret; } - mutex_lock(&dts_update_mutex); - err = soc_dts_enable(aux_entry->tzone); - mutex_unlock(&dts_update_mutex); + err = thermal_zone_device_enable(aux_entry->tzone); if (err) goto err_aux_status; diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c index f75271b669c6..4f1a2f7c016c 100644 --- a/drivers/thermal/intel/intel_soc_dts_iosf.c +++ b/drivers/thermal/intel/intel_soc_dts_iosf.c @@ -329,6 +329,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts, ret = PTR_ERR(dts->tzone); goto err_ret; } + ret = thermal_zone_device_enable(dts->tzone); + if (ret) + goto err_enable; ret = soc_dts_enable(id); if (ret) diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c index a006b9fd1d72..b81c33202f41 100644 --- a/drivers/thermal/intel/x86_pkg_temp_thermal.c +++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c @@ -363,6 +363,12 @@ static int pkg_temp_thermal_device_add(unsigned int cpu) kfree(zonedev); return err; } + err = thermal_zone_device_enable(zonedev->tzone); + if (err) { + thermal_zone_device_unregister(zonedev->tzone); + kfree(zonedev); + return err; + } /* Store MSR value for package thermal interrupt, to restore at exit */ rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, zonedev->msr_pkg_therm_low, zonedev->msr_pkg_therm_high); diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c index 189b675cf14d..7fb6e476c82a 100644 --- a/drivers/thermal/kirkwood_thermal.c +++ b/drivers/thermal/kirkwood_thermal.c @@ -65,6 +65,7 @@ static int kirkwood_thermal_probe(struct platform_device *pdev) struct thermal_zone_device *thermal = NULL; struct kirkwood_thermal_priv *priv; struct resource *res; + int ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -82,6 +83,12 @@ static int kirkwood_thermal_probe(struct platform_device *pdev) "Failed to register thermal zone device\n"); return PTR_ERR(thermal); } + ret = thermal_zone_device_enable(thermal); + if (ret) { + thermal_zone_device_unregister(thermal); + dev_err(&pdev->dev, "Failed to enable thermal zone device\n"); + return ret; + } platform_set_drvdata(pdev, thermal); diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 42c9cd0e5f77..0bd7aa564bc2 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -38,6 +38,7 @@ #define TEMP_MONIDET0 0x014 #define TEMP_MONIDET1 0x018 #define TEMP_MSRCTL0 0x038 +#define TEMP_MSRCTL1 0x03c #define TEMP_AHBPOLL 0x040 #define TEMP_AHBTO 0x044 #define TEMP_ADCPNP0 0x048 @@ -120,18 +121,32 @@ * MT2701 has 3 sensors and needs 3 VTS calibration data. * MT2712 has 4 sensors and needs 4 VTS calibration data. */ -#define CALIB_BUF0_VALID BIT(0) -#define CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) -#define CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff) -#define CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff) -#define CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff) -#define CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff) -#define CALIB_BUF2_VTS_TS5(x) (((x) >> 5) & 0x1ff) -#define CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff) -#define CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) -#define CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) -#define CALIB_BUF0_O_SLOPE_SIGN(x) (((x) >> 7) & 0x1) -#define CALIB_BUF1_ID(x) (((x) >> 9) & 0x1) +#define CALIB_BUF0_VALID_V1 BIT(0) +#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff) +#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff) +#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff) +#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff) +#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff) +#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff) +#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff) +#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f) +#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f) +#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1) +#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1) + +/* + * Layout of the fuses providing the calibration data + * These macros could be used for MT7622. + */ +#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff) +#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff) +#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f) +#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f) +#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff) +#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff) +#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff) +#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) +#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) enum { VTS1, @@ -143,6 +158,11 @@ enum { MAX_NUM_VTS, }; +enum mtk_thermal_version { + MTK_THERMAL_V1 = 1, + MTK_THERMAL_V2, +}; + /* MT2701 thermal sensors */ #define MT2701_TS1 0 #define MT2701_TS2 1 @@ -248,6 +268,7 @@ struct mtk_thermal_data { const int *controller_offset; bool need_switch_bank; struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; + enum mtk_thermal_version version; }; struct mtk_thermal { @@ -261,8 +282,10 @@ struct mtk_thermal { /* Calibration values */ s32 adc_ge; + s32 adc_oe; s32 degc_cali; s32 o_slope; + s32 o_slope_sign; s32 vts[MAX_NUM_VTS]; const struct mtk_thermal_data *conf; @@ -401,6 +424,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = { .msr = mt8173_msr, .adcpnp = mt8173_adcpnp, .sensor_mux_values = mt8173_mux_values, + .version = MTK_THERMAL_V1, }; /* @@ -431,6 +455,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = { .msr = mt2701_msr, .adcpnp = mt2701_adcpnp, .sensor_mux_values = mt2701_mux_values, + .version = MTK_THERMAL_V1, }; /* @@ -461,6 +486,7 @@ static const struct mtk_thermal_data mt2712_thermal_data = { .msr = mt2712_msr, .adcpnp = mt2712_adcpnp, .sensor_mux_values = mt2712_mux_values, + .version = MTK_THERMAL_V1, }; /* @@ -485,6 +511,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = { .msr = mt7622_msr, .adcpnp = mt7622_adcpnp, .sensor_mux_values = mt7622_mux_values, + .version = MTK_THERMAL_V2, }; /* @@ -517,6 +544,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = { .msr = mt8183_msr, .adcpnp = mt8183_adcpnp, .sensor_mux_values = mt8183_mux_values, + .version = MTK_THERMAL_V1, }; /** @@ -528,7 +556,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = { * This converts the raw ADC value to mcelsius using the SoC specific * calibration constants */ -static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw) +static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw) { s32 tmp; @@ -543,6 +571,36 @@ static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw) return mt->degc_cali * 500 - tmp; } +static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) +{ + s32 format_1 = 0; + s32 format_2 = 0; + s32 g_oe = 1; + s32 g_gain = 1; + s32 g_x_roomt = 0; + s32 tmp = 0; + + if (raw == 0) + return 0; + + raw &= 0xfff; + g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12); + g_oe = mt->adc_oe - 512; + format_1 = mt->vts[VTS2] + 3105 - g_oe; + format_2 = (mt->degc_cali * 10) >> 1; + g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain; + + tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt; + tmp = tmp * 10 * 100 / 11; + + if (mt->o_slope_sign == 0) + tmp = tmp / (165 - mt->o_slope); + else + tmp = tmp / (165 + mt->o_slope); + + return (format_2 - tmp) * 100; +} + /** * mtk_thermal_get_bank - get bank * @bank: The bank @@ -596,9 +654,13 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { raw = readl(mt->thermal_base + conf->msr[i]); - temp = raw_to_mcelsius(mt, - conf->bank_data[bank->id].sensors[i], - raw); + if (mt->conf->version == MTK_THERMAL_V1) { + temp = raw_to_mcelsius_v1( + mt, conf->bank_data[bank->id].sensors[i], raw); + } else { + temp = raw_to_mcelsius_v2( + mt, conf->bank_data[bank->id].sensors[i], raw); + } /* * The first read of a sensor often contains very high bogus @@ -700,9 +762,11 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, writel(auxadc_phys_base + AUXADC_CON1_CLR_V, controller_base + TEMP_ADCMUXADDR); - /* AHB address for pnp sensor mux selection */ - writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, - controller_base + TEMP_PNPMUXADDR); + if (mt->conf->version == MTK_THERMAL_V1) { + /* AHB address for pnp sensor mux selection */ + writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, + controller_base + TEMP_PNPMUXADDR); + } /* AHB value for auxadc enable */ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN); @@ -759,6 +823,68 @@ static u64 of_get_phys_base(struct device_node *np) return of_translate_address(np, regaddr_p); } +static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) +{ + int i; + + if (!(buf[0] & CALIB_BUF0_VALID_V1)) + return -EINVAL; + + mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]); + + for (i = 0; i < mt->conf->num_sensors; i++) { + switch (mt->conf->vts_index[i]) { + case VTS1: + mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]); + break; + case VTS2: + mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]); + break; + case VTS3: + mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]); + break; + case VTS4: + mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]); + break; + case VTS5: + mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]); + break; + case VTSABB: + mt->vts[VTSABB] = + CALIB_BUF2_VTS_TSABB_V1(buf[2]); + break; + default: + break; + } + } + + mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]); + if (CALIB_BUF1_ID_V1(buf[1]) & + CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0])) + mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]); + else + mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]); + + return 0; +} + +static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf) +{ + if (!CALIB_BUF1_VALID_V2(buf[1])) + return -EINVAL; + + mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]); + mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]); + mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]); + mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]); + mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]); + mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]); + mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]); + mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]); + + return 0; +} + static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt) { @@ -794,42 +920,14 @@ static int mtk_thermal_get_calibration_data(struct device *dev, goto out; } - if (buf[0] & CALIB_BUF0_VALID) { - mt->adc_ge = CALIB_BUF1_ADC_GE(buf[1]); - - for (i = 0; i < mt->conf->num_sensors; i++) { - switch (mt->conf->vts_index[i]) { - case VTS1: - mt->vts[VTS1] = CALIB_BUF0_VTS_TS1(buf[0]); - break; - case VTS2: - mt->vts[VTS2] = CALIB_BUF0_VTS_TS2(buf[0]); - break; - case VTS3: - mt->vts[VTS3] = CALIB_BUF1_VTS_TS3(buf[1]); - break; - case VTS4: - mt->vts[VTS4] = CALIB_BUF2_VTS_TS4(buf[2]); - break; - case VTS5: - mt->vts[VTS5] = CALIB_BUF2_VTS_TS5(buf[2]); - break; - case VTSABB: - mt->vts[VTSABB] = CALIB_BUF2_VTS_TSABB(buf[2]); - break; - default: - break; - } - } + if (mt->conf->version == MTK_THERMAL_V1) + ret = mtk_thermal_extract_efuse_v1(mt, buf); + else + ret = mtk_thermal_extract_efuse_v2(mt, buf); - mt->degc_cali = CALIB_BUF0_DEGC_CALI(buf[0]); - if (CALIB_BUF1_ID(buf[1]) & - CALIB_BUF0_O_SLOPE_SIGN(buf[0])) - mt->o_slope = -CALIB_BUF0_O_SLOPE(buf[0]); - else - mt->o_slope = CALIB_BUF0_O_SLOPE(buf[0]); - } else { + if (ret) { dev_info(dev, "Device not calibrated, using default calibration values\n"); + ret = 0; } out: @@ -863,6 +961,28 @@ static const struct of_device_id mtk_thermal_of_match[] = { }; MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); +static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) +{ + int tmp; + + tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); + tmp &= ~(0x37); + tmp |= 0x1; + writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); + udelay(200); +} + +static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt, + void __iomem *auxadc_base) +{ + int tmp; + + writel(0x800, auxadc_base + AUXADC_CON1_SET_V); + writel(0x1, mt->thermal_base + TEMP_MONCTL0); + tmp = readl(mt->thermal_base + TEMP_MSRCTL1); + writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1); +} + static int mtk_thermal_probe(struct platform_device *pdev) { int ret, i, ctrl_id; @@ -871,6 +991,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) struct resource *res; u64 auxadc_phys_base, apmixed_phys_base; struct thermal_zone_device *tzdev; + void __iomem *apmixed_base, *auxadc_base; mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); if (!mt) @@ -905,6 +1026,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) return -ENODEV; } + auxadc_base = of_iomap(auxadc, 0); auxadc_phys_base = of_get_phys_base(auxadc); of_node_put(auxadc); @@ -920,6 +1042,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) return -ENODEV; } + apmixed_base = of_iomap(apmixedsys, 0); apmixed_phys_base = of_get_phys_base(apmixedsys); of_node_put(apmixedsys); @@ -945,6 +1068,11 @@ static int mtk_thermal_probe(struct platform_device *pdev) goto err_disable_clk_auxadc; } + if (mt->conf->version == MTK_THERMAL_V2) { + mtk_thermal_turn_on_buffer(apmixed_base); + mtk_thermal_release_periodic_ts(mt, auxadc_base); + } + for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) for (i = 0; i < mt->conf->num_banks; i++) mtk_thermal_init_bank(mt, i, apmixed_phys_base, diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index 959a9371d205..e64db5f80d90 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -48,6 +48,63 @@ #define MSM8916_CAL_SEL_MASK 0xe0000000 #define MSM8916_CAL_SEL_SHIFT 29 +/* eeprom layout data for 8939 */ +#define MSM8939_BASE0_MASK 0x000000ff +#define MSM8939_BASE1_MASK 0xff000000 +#define MSM8939_BASE0_SHIFT 0 +#define MSM8939_BASE1_SHIFT 24 + +#define MSM8939_S0_P1_MASK 0x000001f8 +#define MSM8939_S1_P1_MASK 0x001f8000 +#define MSM8939_S2_P1_MASK_0_4 0xf8000000 +#define MSM8939_S2_P1_MASK_5 0x00000001 +#define MSM8939_S3_P1_MASK 0x00001f80 +#define MSM8939_S4_P1_MASK 0x01f80000 +#define MSM8939_S5_P1_MASK 0x00003f00 +#define MSM8939_S6_P1_MASK 0x03f00000 +#define MSM8939_S7_P1_MASK 0x0000003f +#define MSM8939_S8_P1_MASK 0x0003f000 +#define MSM8939_S9_P1_MASK 0x07e00000 + +#define MSM8939_S0_P2_MASK 0x00007e00 +#define MSM8939_S1_P2_MASK 0x07e00000 +#define MSM8939_S2_P2_MASK 0x0000007e +#define MSM8939_S3_P2_MASK 0x0007e000 +#define MSM8939_S4_P2_MASK 0x7e000000 +#define MSM8939_S5_P2_MASK 0x000fc000 +#define MSM8939_S6_P2_MASK 0xfc000000 +#define MSM8939_S7_P2_MASK 0x00000fc0 +#define MSM8939_S8_P2_MASK 0x00fc0000 +#define MSM8939_S9_P2_MASK_0_4 0xf8000000 +#define MSM8939_S9_P2_MASK_5 0x00002000 + +#define MSM8939_S0_P1_SHIFT 3 +#define MSM8939_S1_P1_SHIFT 15 +#define MSM8939_S2_P1_SHIFT_0_4 27 +#define MSM8939_S2_P1_SHIFT_5 0 +#define MSM8939_S3_P1_SHIFT 7 +#define MSM8939_S4_P1_SHIFT 19 +#define MSM8939_S5_P1_SHIFT 8 +#define MSM8939_S6_P1_SHIFT 20 +#define MSM8939_S7_P1_SHIFT 0 +#define MSM8939_S8_P1_SHIFT 12 +#define MSM8939_S9_P1_SHIFT 21 + +#define MSM8939_S0_P2_SHIFT 9 +#define MSM8939_S1_P2_SHIFT 21 +#define MSM8939_S2_P2_SHIFT 1 +#define MSM8939_S3_P2_SHIFT 13 +#define MSM8939_S4_P2_SHIFT 25 +#define MSM8939_S5_P2_SHIFT 14 +#define MSM8939_S6_P2_SHIFT 26 +#define MSM8939_S7_P2_SHIFT 6 +#define MSM8939_S8_P2_SHIFT 18 +#define MSM8939_S9_P2_SHIFT_0_4 27 +#define MSM8939_S9_P2_SHIFT_5 13 + +#define MSM8939_CAL_SEL_MASK 0x7 +#define MSM8939_CAL_SEL_SHIFT 0 + /* eeprom layout data for 8974 */ #define BASE1_MASK 0xff #define S0_P1_MASK 0x3f00 @@ -189,6 +246,76 @@ static int calibrate_8916(struct tsens_priv *priv) return 0; } +static int calibrate_8939(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[10], p2[10]; + int mode = 0; + u32 *qfprom_cdata; + u32 cdata[6]; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + /* Mapping between qfprom nvmem and calibration data */ + cdata[0] = qfprom_cdata[12]; + cdata[1] = qfprom_cdata[13]; + cdata[2] = qfprom_cdata[0]; + cdata[3] = qfprom_cdata[1]; + cdata[4] = qfprom_cdata[22]; + cdata[5] = qfprom_cdata[21]; + + mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT; + p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT; + p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT; + p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT; + p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT; + p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT; + p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT; + p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT; + p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT; + p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT; + p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4; + p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = (base1 + p2[i]) << 2; + fallthrough; + case ONE_PT_CALIB2: + base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT; + p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT; + p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT; + p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4; + p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5; + p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT; + p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT; + p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT; + p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT; + p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT; + p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT; + p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = ((base0) + p1[i]) << 2; + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + static int calibrate_8974(struct tsens_priv *priv) { int base1 = 0, base2 = 0, i; @@ -325,7 +452,7 @@ static int calibrate_8974(struct tsens_priv *priv) return 0; } -/* v0.1: 8916, 8974 */ +/* v0.1: 8916, 8939, 8974 */ static struct tsens_features tsens_v0_1_feat = { .ver_major = VER_0_1, @@ -386,6 +513,21 @@ struct tsens_plat_data data_8916 = { .fields = tsens_v0_1_regfields, }; +static const struct tsens_ops ops_8939 = { + .init = init_common, + .calibrate = calibrate_8939, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8939 = { + .num_sensors = 10, + .ops = &ops_8939, + .hw_ids = (unsigned int []){ 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 }, + + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; + static const struct tsens_ops ops_8974 = { .init = init_common, .calibrate = calibrate_8974, diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 39c4462e38f6..d8ce3a687b80 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -898,6 +898,9 @@ static const struct of_device_id tsens_table[] = { .compatible = "qcom,msm8916-tsens", .data = &data_8916, }, { + .compatible = "qcom,msm8939-tsens", + .data = &data_8939, + }, { .compatible = "qcom,msm8974-tsens", .data = &data_8974, }, { diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 59d01162c66a..f40b625f897e 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -585,7 +585,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp); extern struct tsens_plat_data data_8960; /* TSENS v0.1 targets */ -extern struct tsens_plat_data data_8916, data_8974; +extern struct tsens_plat_data data_8916, data_8939, data_8974; /* TSENS v1 targets */ extern struct tsens_plat_data data_tsens_v1, data_8976; diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index c48c5e9b8f20..0dd47dca3e77 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -63,7 +63,7 @@ #define TSC_MAX_NUM 3 /* default THCODE values if FUSEs are missing */ -static const int thcode[TSC_MAX_NUM][3] = { +static const int thcodes[TSC_MAX_NUM][3] = { { 3397, 2800, 2221 }, { 3393, 2795, 2216 }, { 3389, 2805, 2237 }, @@ -172,7 +172,7 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp) /* Read register and convert to mili Celsius */ reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; - if (reg <= thcode[tsc->id][1]) + if (reg <= thcodes[tsc->id][1]) val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, tsc->coef.a1); else @@ -315,6 +315,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { .data = &rcar_gen3_ths_tj_1, }, { + .compatible = "renesas,r8a774e1-thermal", + .data = &rcar_gen3_ths_tj_1, + }, + { .compatible = "renesas,r8a7795-thermal", .data = &rcar_gen3_ths_tj_1, }, @@ -430,7 +434,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) priv->tscs[i] = tsc; priv->thermal_init(tsc); - rcar_gen3_thermal_calc_coefs(tsc, ptat, thcode[i], + rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *rcar_gen3_ths_tj_1); zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 46aeb28b4e90..787710bb88fe 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -550,12 +550,19 @@ static int rcar_thermal_probe(struct platform_device *pdev) priv->zone = devm_thermal_zone_of_sensor_register( dev, i, priv, &rcar_thermal_zone_of_ops); - else + else { priv->zone = thermal_zone_device_register( "rcar_thermal", 1, 0, priv, &rcar_thermal_zone_ops, NULL, 0, idle); + + ret = thermal_zone_device_enable(priv->zone); + if (ret) { + thermal_zone_device_unregister(priv->zone); + priv->zone = ERR_PTR(ret); + } + } if (IS_ERR(priv->zone)) { dev_err(dev, "can't register thermal zone\n"); ret = PTR_ERR(priv->zone); diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 15a71ecc916c..aa9e0e31ef98 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -1068,8 +1068,10 @@ rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on) { struct thermal_zone_device *tzd = sensor->tzd; - tzd->ops->set_mode(tzd, - on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED); + if (on) + thermal_zone_device_enable(tzd); + else + thermal_zone_device_disable(tzd); } static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev) diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index f68f581fd669..ee33ed692e4f 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -131,6 +131,11 @@ static int spear_thermal_probe(struct platform_device *pdev) ret = PTR_ERR(spear_thermal); goto disable_clk; } + ret = thermal_zone_device_enable(spear_thermal); + if (ret) { + dev_err(&pdev->dev, "Cannot enable thermal zone\n"); + goto unregister_tzd; + } platform_set_drvdata(pdev, spear_thermal); @@ -139,6 +144,8 @@ static int spear_thermal_probe(struct platform_device *pdev) return 0; +unregister_tzd: + thermal_zone_device_unregister(spear_thermal); disable_clk: clk_disable(stdev->clk); diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c index 4cde70dcf655..3682edb2f466 100644 --- a/drivers/thermal/sprd_thermal.c +++ b/drivers/thermal/sprd_thermal.c @@ -322,8 +322,10 @@ static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on) { struct thermal_zone_device *tzd = sen->tzd; - tzd->ops->set_mode(tzd, - on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED); + if (on) + thermal_zone_device_enable(tzd); + else + thermal_zone_device_disable(tzd); } static int sprd_thm_probe(struct platform_device *pdev) diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c index b928ca6a289b..1276b95604fe 100644 --- a/drivers/thermal/st/st_thermal.c +++ b/drivers/thermal/st/st_thermal.c @@ -246,11 +246,16 @@ int st_thermal_register(struct platform_device *pdev, ret = PTR_ERR(sensor->thermal_dev); goto sensor_off; } + ret = thermal_zone_device_enable(sensor->thermal_dev); + if (ret) + goto tzd_unregister; platform_set_drvdata(pdev, sensor); return 0; +tzd_unregister: + thermal_zone_device_unregister(sensor->thermal_dev); sensor_off: st_thermal_sensor_off(sensor); diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index b71196eaf90e..72bf159bcecc 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -215,6 +215,8 @@ exit: mutex_unlock(&tz->lock); mutex_unlock(&thermal_governor_lock); + thermal_notify_tz_gov_change(tz->id, policy); + return ret; } @@ -301,13 +303,22 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, cancel_delayed_work(&tz->poll_queue); } +static inline bool should_stop_polling(struct thermal_zone_device *tz) +{ + return !thermal_zone_device_is_enabled(tz); +} + static void monitor_thermal_zone(struct thermal_zone_device *tz) { + bool stop; + + stop = should_stop_polling(tz); + mutex_lock(&tz->lock); - if (tz->passive) + if (!stop && tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); - else if (tz->polling_delay) + else if (!stop && tz->polling_delay) thermal_zone_device_set_polling(tz, tz->polling_delay); else thermal_zone_device_set_polling(tz, 0); @@ -406,12 +417,25 @@ static void handle_critical_trips(struct thermal_zone_device *tz, static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) { enum thermal_trip_type type; + int trip_temp, hyst = 0; /* Ignore disabled trip points */ if (test_bit(trip, &tz->trips_disabled)) return; + tz->ops->get_trip_temp(tz, trip, &trip_temp); tz->ops->get_trip_type(tz, trip, &type); + if (tz->ops->get_trip_hyst) + tz->ops->get_trip_hyst(tz, trip, &hyst); + + if (tz->last_temperature != THERMAL_TEMP_INVALID) { + if (tz->last_temperature < trip_temp && + tz->temperature >= trip_temp) + thermal_notify_tz_trip_up(tz->id, trip); + if (tz->last_temperature >= trip_temp && + tz->temperature < (trip_temp - hyst)) + thermal_notify_tz_trip_down(tz->id, trip); + } if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT) handle_critical_trips(tz, trip, type); @@ -443,6 +467,8 @@ static void update_temperature(struct thermal_zone_device *tz) mutex_unlock(&tz->lock); trace_thermal_temperature(tz); + + thermal_genl_sampling_temp(tz->id, temp); } static void thermal_zone_device_init(struct thermal_zone_device *tz) @@ -459,11 +485,71 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz) thermal_zone_device_init(tz); } +static int thermal_zone_device_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) +{ + int ret = 0; + + mutex_lock(&tz->lock); + + /* do nothing if mode isn't changing */ + if (mode == tz->mode) { + mutex_unlock(&tz->lock); + + return ret; + } + + if (tz->ops->change_mode) + ret = tz->ops->change_mode(tz, mode); + + if (!ret) + tz->mode = mode; + + mutex_unlock(&tz->lock); + + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + if (mode == THERMAL_DEVICE_ENABLED) + thermal_notify_tz_enable(tz->id); + else + thermal_notify_tz_disable(tz->id); + + return ret; +} + +int thermal_zone_device_enable(struct thermal_zone_device *tz) +{ + return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_ENABLED); +} +EXPORT_SYMBOL_GPL(thermal_zone_device_enable); + +int thermal_zone_device_disable(struct thermal_zone_device *tz) +{ + return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_DISABLED); +} +EXPORT_SYMBOL_GPL(thermal_zone_device_disable); + +int thermal_zone_device_is_enabled(struct thermal_zone_device *tz) +{ + enum thermal_device_mode mode; + + mutex_lock(&tz->lock); + + mode = tz->mode; + + mutex_unlock(&tz->lock); + + return mode == THERMAL_DEVICE_ENABLED; +} + void thermal_zone_device_update(struct thermal_zone_device *tz, enum thermal_notify_event event) { int count; + if (should_stop_polling(tz)) + return; + if (atomic_read(&in_suspend)) return; @@ -617,6 +703,73 @@ void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz, mutex_unlock(&thermal_list_lock); } +int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *), + void *data) +{ + struct thermal_governor *gov; + int ret = 0; + + mutex_lock(&thermal_governor_lock); + list_for_each_entry(gov, &thermal_governor_list, governor_list) { + ret = cb(gov, data); + if (ret) + break; + } + mutex_unlock(&thermal_governor_lock); + + return ret; +} + +int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *, + void *), void *data) +{ + struct thermal_cooling_device *cdev; + int ret = 0; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(cdev, &thermal_cdev_list, node) { + ret = cb(cdev, data); + if (ret) + break; + } + mutex_unlock(&thermal_list_lock); + + return ret; +} + +int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *), + void *data) +{ + struct thermal_zone_device *tz; + int ret = 0; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(tz, &thermal_tz_list, node) { + ret = cb(tz, data); + if (ret) + break; + } + mutex_unlock(&thermal_list_lock); + + return ret; +} + +struct thermal_zone_device *thermal_zone_get_by_id(int id) +{ + struct thermal_zone_device *tz, *match = NULL; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(tz, &thermal_tz_list, node) { + if (tz->id == id) { + match = tz; + break; + } + } + mutex_unlock(&thermal_list_lock); + + return match; +} + void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz, const char *cdev_type, size_t size) { @@ -1340,6 +1493,8 @@ thermal_zone_device_register(const char *type, int trips, int mask, if (atomic_cmpxchg(&tz->need_update, 1, 0)) thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + thermal_notify_tz_create(tz->id, tz->type); + return tz; unregister: @@ -1411,6 +1566,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) ida_destroy(&tz->ida); mutex_destroy(&tz->lock); device_unregister(&tz->device); + + thermal_notify_tz_delete(tz->id); } EXPORT_SYMBOL_GPL(thermal_zone_device_unregister); @@ -1456,7 +1613,6 @@ static int thermal_pm_notify(struct notifier_block *nb, unsigned long mode, void *_unused) { struct thermal_zone_device *tz; - enum thermal_device_mode tz_mode; switch (mode) { case PM_HIBERNATION_PREPARE: @@ -1469,11 +1625,7 @@ static int thermal_pm_notify(struct notifier_block *nb, case PM_POST_SUSPEND: atomic_set(&in_suspend, 0); list_for_each_entry(tz, &thermal_tz_list, node) { - tz_mode = THERMAL_DEVICE_ENABLED; - if (tz->ops->get_mode) - tz->ops->get_mode(tz, &tz_mode); - - if (tz_mode == THERMAL_DEVICE_DISABLED) + if (!thermal_zone_device_is_enabled(tz)) continue; thermal_zone_device_init(tz); @@ -1495,6 +1647,10 @@ static int __init thermal_init(void) { int result; + result = thermal_netlink_init(); + if (result) + goto error; + mutex_init(&poweroff_lock); result = thermal_register_governors(); if (result) @@ -1527,4 +1683,4 @@ error: mutex_destroy(&poweroff_lock); return result; } -core_initcall(thermal_init); +postcore_initcall(thermal_init); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index c95689586e19..e00fc5585ea8 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -12,6 +12,8 @@ #include <linux/device.h> #include <linux/thermal.h> +#include "thermal_netlink.h" + /* Default Thermal Governor */ #if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE) #define DEFAULT_THERMAL_GOVERNOR "step_wise" @@ -41,6 +43,17 @@ extern struct thermal_governor *__governor_thermal_table_end[]; __governor < __governor_thermal_table_end; \ __governor++) +int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *), + void *); + +int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *, + void *), void *); + +int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *), + void *thermal_governor); + +struct thermal_zone_device *thermal_zone_get_by_id(int id); + struct thermal_attr { struct device_attribute attr; char name[THERMAL_NAME_LENGTH]; @@ -166,4 +179,6 @@ of_thermal_get_trip_points(struct thermal_zone_device *tz) } #endif +int thermal_zone_device_is_enabled(struct thermal_zone_device *tz); + #endif /* __THERMAL_CORE_H__ */ diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c index 87b1256fa2f2..c94bc824e5d3 100644 --- a/drivers/thermal/thermal_helpers.c +++ b/drivers/thermal/thermal_helpers.c @@ -175,6 +175,16 @@ exit: mutex_unlock(&tz->lock); } +static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev, + int target) +{ + if (cdev->ops->set_cur_state(cdev, target)) + return; + + thermal_notify_cdev_state_update(cdev->id, target); + thermal_cooling_device_stats_update(cdev, target); +} + void thermal_cdev_update(struct thermal_cooling_device *cdev) { struct thermal_instance *instance; @@ -197,8 +207,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) target = instance->target; } - if (!cdev->ops->set_cur_state(cdev, target)) - thermal_cooling_device_stats_update(cdev, target); + thermal_cdev_set_cur_state(cdev, target); cdev->updated = true; mutex_unlock(&cdev->lock); diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c new file mode 100644 index 000000000000..af7b2383e8f6 --- /dev/null +++ b/drivers/thermal/thermal_netlink.c @@ -0,0 +1,647 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 Linaro Limited + * + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> + * + * Generic netlink for thermal management framework + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <net/genetlink.h> +#include <uapi/linux/thermal.h> + +#include "thermal_core.h" + +static const struct genl_multicast_group thermal_genl_mcgrps[] = { + { .name = THERMAL_GENL_SAMPLING_GROUP_NAME, }, + { .name = THERMAL_GENL_EVENT_GROUP_NAME, }, +}; + +static const struct nla_policy thermal_genl_policy[THERMAL_GENL_ATTR_MAX + 1] = { + /* Thermal zone */ + [THERMAL_GENL_ATTR_TZ] = { .type = NLA_NESTED }, + [THERMAL_GENL_ATTR_TZ_ID] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_TEMP] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_TRIP] = { .type = NLA_NESTED }, + [THERMAL_GENL_ATTR_TZ_TRIP_ID] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_TRIP_TEMP] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_TRIP_TYPE] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_TRIP_HYST] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_MODE] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_CDEV_WEIGHT] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_TZ_NAME] = { .type = NLA_STRING, + .len = THERMAL_NAME_LENGTH }, + /* Governor(s) */ + [THERMAL_GENL_ATTR_TZ_GOV] = { .type = NLA_NESTED }, + [THERMAL_GENL_ATTR_TZ_GOV_NAME] = { .type = NLA_STRING, + .len = THERMAL_NAME_LENGTH }, + /* Cooling devices */ + [THERMAL_GENL_ATTR_CDEV] = { .type = NLA_NESTED }, + [THERMAL_GENL_ATTR_CDEV_ID] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_CDEV_CUR_STATE] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_CDEV_MAX_STATE] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_CDEV_NAME] = { .type = NLA_STRING, + .len = THERMAL_NAME_LENGTH }, +}; + +struct param { + struct nlattr **attrs; + struct sk_buff *msg; + const char *name; + int tz_id; + int cdev_id; + int trip_id; + int trip_temp; + int trip_type; + int trip_hyst; + int temp; + int cdev_state; + int cdev_max_state; +}; + +typedef int (*cb_t)(struct param *); + +static struct genl_family thermal_gnl_family; + +/************************** Sampling encoding *******************************/ + +int thermal_genl_sampling_temp(int id, int temp) +{ + struct sk_buff *skb; + void *hdr; + + skb = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0, + THERMAL_GENL_SAMPLING_TEMP); + if (!hdr) + return -EMSGSIZE; + + if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_ID, id)) + goto out_cancel; + + if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_TEMP, temp)) + goto out_cancel; + + genlmsg_end(skb, hdr); + + genlmsg_multicast(&thermal_gnl_family, skb, 0, 0, GFP_KERNEL); + + return 0; +out_cancel: + genlmsg_cancel(skb, hdr); + nlmsg_free(skb); + + return -EMSGSIZE; +} + +/**************************** Event encoding *********************************/ + +static int thermal_genl_event_tz_create(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) || + nla_put_string(p->msg, THERMAL_GENL_ATTR_TZ_NAME, p->name)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_tz(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_tz_trip_up(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_tz_trip_add(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, p->trip_type) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, p->trip_temp) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, p->trip_hyst)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_tz_trip_delete(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_cdev_add(struct param *p) +{ + if (nla_put_string(p->msg, THERMAL_GENL_ATTR_CDEV_NAME, + p->name) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID, + p->cdev_id) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_MAX_STATE, + p->cdev_max_state)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_cdev_delete(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID, p->cdev_id)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_cdev_state_update(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID, + p->cdev_id) || + nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_CUR_STATE, + p->cdev_state)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_event_gov_change(struct param *p) +{ + if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) || + nla_put_string(p->msg, THERMAL_GENL_ATTR_GOV_NAME, p->name)) + return -EMSGSIZE; + + return 0; +} + +int thermal_genl_event_tz_delete(struct param *p) + __attribute__((alias("thermal_genl_event_tz"))); + +int thermal_genl_event_tz_enable(struct param *p) + __attribute__((alias("thermal_genl_event_tz"))); + +int thermal_genl_event_tz_disable(struct param *p) + __attribute__((alias("thermal_genl_event_tz"))); + +int thermal_genl_event_tz_trip_down(struct param *p) + __attribute__((alias("thermal_genl_event_tz_trip_up"))); + +int thermal_genl_event_tz_trip_change(struct param *p) + __attribute__((alias("thermal_genl_event_tz_trip_add"))); + +static cb_t event_cb[] = { + [THERMAL_GENL_EVENT_TZ_CREATE] = thermal_genl_event_tz_create, + [THERMAL_GENL_EVENT_TZ_DELETE] = thermal_genl_event_tz_delete, + [THERMAL_GENL_EVENT_TZ_ENABLE] = thermal_genl_event_tz_enable, + [THERMAL_GENL_EVENT_TZ_DISABLE] = thermal_genl_event_tz_disable, + [THERMAL_GENL_EVENT_TZ_TRIP_UP] = thermal_genl_event_tz_trip_up, + [THERMAL_GENL_EVENT_TZ_TRIP_DOWN] = thermal_genl_event_tz_trip_down, + [THERMAL_GENL_EVENT_TZ_TRIP_CHANGE] = thermal_genl_event_tz_trip_change, + [THERMAL_GENL_EVENT_TZ_TRIP_ADD] = thermal_genl_event_tz_trip_add, + [THERMAL_GENL_EVENT_TZ_TRIP_DELETE] = thermal_genl_event_tz_trip_delete, + [THERMAL_GENL_EVENT_CDEV_ADD] = thermal_genl_event_cdev_add, + [THERMAL_GENL_EVENT_CDEV_DELETE] = thermal_genl_event_cdev_delete, + [THERMAL_GENL_EVENT_CDEV_STATE_UPDATE] = thermal_genl_event_cdev_state_update, + [THERMAL_GENL_EVENT_TZ_GOV_CHANGE] = thermal_genl_event_gov_change, +}; + +/* + * Generic netlink event encoding + */ +static int thermal_genl_send_event(enum thermal_genl_event event, + struct param *p) +{ + struct sk_buff *msg; + int ret = -EMSGSIZE; + void *hdr; + + msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + p->msg = msg; + + hdr = genlmsg_put(msg, 0, 0, &thermal_gnl_family, 0, event); + if (!hdr) + goto out_free_msg; + + ret = event_cb[event](p); + if (ret) + goto out_cancel_msg; + + genlmsg_end(msg, hdr); + + genlmsg_multicast(&thermal_gnl_family, msg, 0, 1, GFP_KERNEL); + + return 0; + +out_cancel_msg: + genlmsg_cancel(msg, hdr); +out_free_msg: + nlmsg_free(msg); + + return ret; +} + +int thermal_notify_tz_create(int tz_id, const char *name) +{ + struct param p = { .tz_id = tz_id, .name = name }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_CREATE, &p); +} + +int thermal_notify_tz_delete(int tz_id) +{ + struct param p = { .tz_id = tz_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DELETE, &p); +} + +int thermal_notify_tz_enable(int tz_id) +{ + struct param p = { .tz_id = tz_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_ENABLE, &p); +} + +int thermal_notify_tz_disable(int tz_id) +{ + struct param p = { .tz_id = tz_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p); +} + +int thermal_notify_tz_trip_down(int tz_id, int trip_id) +{ + struct param p = { .tz_id = tz_id, .trip_id = trip_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p); +} + +int thermal_notify_tz_trip_up(int tz_id, int trip_id) +{ + struct param p = { .tz_id = tz_id, .trip_id = trip_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p); +} + +int thermal_notify_tz_trip_add(int tz_id, int trip_id, int trip_type, + int trip_temp, int trip_hyst) +{ + struct param p = { .tz_id = tz_id, .trip_id = trip_id, + .trip_type = trip_type, .trip_temp = trip_temp, + .trip_hyst = trip_hyst }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_ADD, &p); +} + +int thermal_notify_tz_trip_delete(int tz_id, int trip_id) +{ + struct param p = { .tz_id = tz_id, .trip_id = trip_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DELETE, &p); +} + +int thermal_notify_tz_trip_change(int tz_id, int trip_id, int trip_type, + int trip_temp, int trip_hyst) +{ + struct param p = { .tz_id = tz_id, .trip_id = trip_id, + .trip_type = trip_type, .trip_temp = trip_temp, + .trip_hyst = trip_hyst }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_CHANGE, &p); +} + +int thermal_notify_cdev_state_update(int cdev_id, int cdev_state) +{ + struct param p = { .cdev_id = cdev_id, .cdev_state = cdev_state }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_STATE_UPDATE, &p); +} + +int thermal_notify_cdev_add(int cdev_id, const char *name, int cdev_max_state) +{ + struct param p = { .cdev_id = cdev_id, .name = name, + .cdev_max_state = cdev_max_state }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_ADD, &p); +} + +int thermal_notify_cdev_delete(int cdev_id) +{ + struct param p = { .cdev_id = cdev_id }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_DELETE, &p); +} + +int thermal_notify_tz_gov_change(int tz_id, const char *name) +{ + struct param p = { .tz_id = tz_id, .name = name }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_GOV_CHANGE, &p); +} + +/*************************** Command encoding ********************************/ + +static int __thermal_genl_cmd_tz_get_id(struct thermal_zone_device *tz, + void *data) +{ + struct sk_buff *msg = data; + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, tz->id) || + nla_put_string(msg, THERMAL_GENL_ATTR_TZ_NAME, tz->type)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_cmd_tz_get_id(struct param *p) +{ + struct sk_buff *msg = p->msg; + struct nlattr *start_tz; + int ret; + + start_tz = nla_nest_start(msg, THERMAL_GENL_ATTR_TZ); + if (!start_tz) + return -EMSGSIZE; + + ret = for_each_thermal_zone(__thermal_genl_cmd_tz_get_id, msg); + if (ret) + goto out_cancel_nest; + + nla_nest_end(msg, start_tz); + + return 0; + +out_cancel_nest: + nla_nest_cancel(msg, start_tz); + + return ret; +} + +static int thermal_genl_cmd_tz_get_trip(struct param *p) +{ + struct sk_buff *msg = p->msg; + struct thermal_zone_device *tz; + struct nlattr *start_trip; + int i, id; + + if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID]) + return -EINVAL; + + id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]); + + tz = thermal_zone_get_by_id(id); + if (!tz) + return -EINVAL; + + start_trip = nla_nest_start(msg, THERMAL_GENL_ATTR_TZ_TRIP); + if (!start_trip) + return -EMSGSIZE; + + mutex_lock(&tz->lock); + + for (i = 0; i < tz->trips; i++) { + + enum thermal_trip_type type; + int temp, hyst; + + tz->ops->get_trip_type(tz, i, &type); + tz->ops->get_trip_temp(tz, i, &temp); + tz->ops->get_trip_hyst(tz, i, &hyst); + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, i) || + nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, type) || + nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, temp) || + nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, hyst)) + goto out_cancel_nest; + } + + mutex_unlock(&tz->lock); + + nla_nest_end(msg, start_trip); + + return 0; + +out_cancel_nest: + mutex_unlock(&tz->lock); + + return -EMSGSIZE; +} + +static int thermal_genl_cmd_tz_get_temp(struct param *p) +{ + struct sk_buff *msg = p->msg; + struct thermal_zone_device *tz; + int temp, ret, id; + + if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID]) + return -EINVAL; + + id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]); + + tz = thermal_zone_get_by_id(id); + if (!tz) + return -EINVAL; + + ret = thermal_zone_get_temp(tz, &temp); + if (ret) + return ret; + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id) || + nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TEMP, temp)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_cmd_tz_get_gov(struct param *p) +{ + struct sk_buff *msg = p->msg; + struct thermal_zone_device *tz; + int id, ret = 0; + + if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID]) + return -EINVAL; + + id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]); + + tz = thermal_zone_get_by_id(id); + if (!tz) + return -EINVAL; + + mutex_lock(&tz->lock); + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id) || + nla_put_string(msg, THERMAL_GENL_ATTR_TZ_GOV_NAME, + tz->governor->name)) + ret = -EMSGSIZE; + + mutex_unlock(&tz->lock); + + return ret; +} + +static int __thermal_genl_cmd_cdev_get(struct thermal_cooling_device *cdev, + void *data) +{ + struct sk_buff *msg = data; + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_CDEV_ID, cdev->id)) + return -EMSGSIZE; + + if (nla_put_string(msg, THERMAL_GENL_ATTR_CDEV_NAME, cdev->type)) + return -EMSGSIZE; + + return 0; +} + +static int thermal_genl_cmd_cdev_get(struct param *p) +{ + struct sk_buff *msg = p->msg; + struct nlattr *start_cdev; + int ret; + + start_cdev = nla_nest_start(msg, THERMAL_GENL_ATTR_CDEV); + if (!start_cdev) + return -EMSGSIZE; + + ret = for_each_thermal_cooling_device(__thermal_genl_cmd_cdev_get, msg); + if (ret) + goto out_cancel_nest; + + nla_nest_end(msg, start_cdev); + + return 0; +out_cancel_nest: + nla_nest_cancel(msg, start_cdev); + + return ret; +} + +static cb_t cmd_cb[] = { + [THERMAL_GENL_CMD_TZ_GET_ID] = thermal_genl_cmd_tz_get_id, + [THERMAL_GENL_CMD_TZ_GET_TRIP] = thermal_genl_cmd_tz_get_trip, + [THERMAL_GENL_CMD_TZ_GET_TEMP] = thermal_genl_cmd_tz_get_temp, + [THERMAL_GENL_CMD_TZ_GET_GOV] = thermal_genl_cmd_tz_get_gov, + [THERMAL_GENL_CMD_CDEV_GET] = thermal_genl_cmd_cdev_get, +}; + +static int thermal_genl_cmd_dumpit(struct sk_buff *skb, + struct netlink_callback *cb) +{ + struct param p = { .msg = skb }; + const struct genl_dumpit_info *info = genl_dumpit_info(cb); + int cmd = info->ops->cmd; + int ret; + void *hdr; + + hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0, cmd); + if (!hdr) + return -EMSGSIZE; + + ret = cmd_cb[cmd](&p); + if (ret) + goto out_cancel_msg; + + genlmsg_end(skb, hdr); + + return 0; + +out_cancel_msg: + genlmsg_cancel(skb, hdr); + + return ret; +} + +static int thermal_genl_cmd_doit(struct sk_buff *skb, + struct genl_info *info) +{ + struct param p = { .attrs = info->attrs }; + struct sk_buff *msg; + void *hdr; + int cmd = info->genlhdr->cmd; + int ret = -EMSGSIZE; + + msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + p.msg = msg; + + hdr = genlmsg_put_reply(msg, info, &thermal_gnl_family, 0, cmd); + if (!hdr) + goto out_free_msg; + + ret = cmd_cb[cmd](&p); + if (ret) + goto out_cancel_msg; + + genlmsg_end(msg, hdr); + + return genlmsg_reply(msg, info); + +out_cancel_msg: + genlmsg_cancel(msg, hdr); +out_free_msg: + nlmsg_free(msg); + + return ret; +} + +static const struct genl_ops thermal_genl_ops[] = { + { + .cmd = THERMAL_GENL_CMD_TZ_GET_ID, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, + .dumpit = thermal_genl_cmd_dumpit, + }, + { + .cmd = THERMAL_GENL_CMD_TZ_GET_TRIP, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, + .doit = thermal_genl_cmd_doit, + }, + { + .cmd = THERMAL_GENL_CMD_TZ_GET_TEMP, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, + .doit = thermal_genl_cmd_doit, + }, + { + .cmd = THERMAL_GENL_CMD_TZ_GET_GOV, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, + .doit = thermal_genl_cmd_doit, + }, + { + .cmd = THERMAL_GENL_CMD_CDEV_GET, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, + .dumpit = thermal_genl_cmd_dumpit, + }, +}; + +static struct genl_family thermal_gnl_family __ro_after_init = { + .hdrsize = 0, + .name = THERMAL_GENL_FAMILY_NAME, + .version = THERMAL_GENL_VERSION, + .maxattr = THERMAL_GENL_ATTR_MAX, + .policy = thermal_genl_policy, + .ops = thermal_genl_ops, + .n_ops = ARRAY_SIZE(thermal_genl_ops), + .mcgrps = thermal_genl_mcgrps, + .n_mcgrps = ARRAY_SIZE(thermal_genl_mcgrps), +}; + +int __init thermal_netlink_init(void) +{ + return genl_register_family(&thermal_gnl_family); +} diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h new file mode 100644 index 000000000000..828d1dddfa98 --- /dev/null +++ b/drivers/thermal/thermal_netlink.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Linaro Ltd 2020 + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> + */ + +/* Netlink notification function */ +#ifdef CONFIG_THERMAL_NETLINK +int __init thermal_netlink_init(void); +int thermal_notify_tz_create(int tz_id, const char *name); +int thermal_notify_tz_delete(int tz_id); +int thermal_notify_tz_enable(int tz_id); +int thermal_notify_tz_disable(int tz_id); +int thermal_notify_tz_trip_down(int tz_id, int id); +int thermal_notify_tz_trip_up(int tz_id, int id); +int thermal_notify_tz_trip_delete(int tz_id, int id); +int thermal_notify_tz_trip_add(int tz_id, int id, int type, + int temp, int hyst); +int thermal_notify_tz_trip_change(int tz_id, int id, int type, + int temp, int hyst); +int thermal_notify_cdev_state_update(int cdev_id, int state); +int thermal_notify_cdev_add(int cdev_id, const char *name, int max_state); +int thermal_notify_cdev_delete(int cdev_id); +int thermal_notify_tz_gov_change(int tz_id, const char *name); +int thermal_genl_sampling_temp(int id, int temp); +#else +static inline int thermal_netlink_init(void) +{ + return 0; +} + +static inline int thermal_notify_tz_create(int tz_id, const char *name) +{ + return 0; +} + +static inline int thermal_notify_tz_delete(int tz_id) +{ + return 0; +} + +static inline int thermal_notify_tz_enable(int tz_id) +{ + return 0; +} + +static inline int thermal_notify_tz_disable(int tz_id) +{ + return 0; +} + +static inline int thermal_notify_tz_trip_down(int tz_id, int id) +{ + return 0; +} + +static inline int thermal_notify_tz_trip_up(int tz_id, int id) +{ + return 0; +} + +static inline int thermal_notify_tz_trip_delete(int tz_id, int id) +{ + return 0; +} + +static inline int thermal_notify_tz_trip_add(int tz_id, int id, int type, + int temp, int hyst) +{ + return 0; +} + +static inline int thermal_notify_tz_trip_change(int tz_id, int id, int type, + int temp, int hyst) +{ + return 0; +} + +static inline int thermal_notify_cdev_state_update(int cdev_id, int state) +{ + return 0; +} + +static inline int thermal_notify_cdev_add(int cdev_id, const char *name, + int max_state) +{ + return 0; +} + +static inline int thermal_notify_cdev_delete(int cdev_id) +{ + return 0; +} + +static inline int thermal_notify_tz_gov_change(int tz_id, const char *name) +{ + return 0; +} + +static inline int thermal_genl_sampling_temp(int id, int temp) +{ + return 0; +} +#endif /* CONFIG_THERMAL_NETLINK */ diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c index ddf88dbe7ba2..69ef12f852b7 100644 --- a/drivers/thermal/thermal_of.c +++ b/drivers/thermal/thermal_of.c @@ -51,7 +51,6 @@ struct __thermal_bind_params { /** * struct __thermal_zone - internal representation of a thermal zone - * @mode: current thermal zone device mode (enabled/disabled) * @passive_delay: polling interval while passive cooling is activated * @polling_delay: zone polling interval * @slope: slope of the temperature adjustment curve @@ -65,7 +64,6 @@ struct __thermal_bind_params { */ struct __thermal_zone { - enum thermal_device_mode mode; int passive_delay; int polling_delay; int slope; @@ -269,39 +267,6 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal, return 0; } -static int of_thermal_get_mode(struct thermal_zone_device *tz, - enum thermal_device_mode *mode) -{ - struct __thermal_zone *data = tz->devdata; - - *mode = data->mode; - - return 0; -} - -static int of_thermal_set_mode(struct thermal_zone_device *tz, - enum thermal_device_mode mode) -{ - struct __thermal_zone *data = tz->devdata; - - mutex_lock(&tz->lock); - - if (mode == THERMAL_DEVICE_ENABLED) { - tz->polling_delay = data->polling_delay; - tz->passive_delay = data->passive_delay; - } else { - tz->polling_delay = 0; - tz->passive_delay = 0; - } - - mutex_unlock(&tz->lock); - - data->mode = mode; - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - return 0; -} - static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip, enum thermal_trip_type *type) { @@ -393,9 +358,6 @@ static int of_thermal_get_crit_temp(struct thermal_zone_device *tz, } static struct thermal_zone_device_ops of_thermal_ops = { - .get_mode = of_thermal_get_mode, - .set_mode = of_thermal_set_mode, - .get_trip_type = of_thermal_get_trip_type, .get_trip_temp = of_thermal_get_trip_temp, .set_trip_temp = of_thermal_set_trip_temp, @@ -554,7 +516,7 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data, tzd = thermal_zone_of_add_sensor(child, sensor_np, data, ops); if (!IS_ERR(tzd)) - tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED); + thermal_zone_device_enable(tzd); of_node_put(child); goto exit; @@ -979,7 +941,6 @@ __init *thermal_of_build_thermal_zone(struct device_node *np) finish: of_node_put(child); - tz->mode = THERMAL_DEVICE_DISABLED; return tz; diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index aa99edb4dff7..8c231219e15d 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -49,18 +49,9 @@ static ssize_t mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_zone_device *tz = to_thermal_zone(dev); - enum thermal_device_mode mode; - int result; - - if (!tz->ops->get_mode) - return -EPERM; + int enabled = thermal_zone_device_is_enabled(tz); - result = tz->ops->get_mode(tz, &mode); - if (result) - return result; - - return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" - : "disabled"); + return sprintf(buf, "%s\n", enabled ? "enabled" : "disabled"); } static ssize_t @@ -70,13 +61,10 @@ mode_store(struct device *dev, struct device_attribute *attr, struct thermal_zone_device *tz = to_thermal_zone(dev); int result; - if (!tz->ops->set_mode) - return -EPERM; - if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) - result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); + result = thermal_zone_device_enable(tz); else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) - result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); + result = thermal_zone_device_disable(tz); else result = -EINVAL; @@ -124,7 +112,8 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, { struct thermal_zone_device *tz = to_thermal_zone(dev); int trip, ret; - int temperature; + int temperature, hyst = 0; + enum thermal_trip_type type; if (!tz->ops->set_trip_temp) return -EPERM; @@ -139,6 +128,18 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, if (ret) return ret; + if (tz->ops->get_trip_hyst) { + ret = tz->ops->get_trip_hyst(tz, trip, &hyst); + if (ret) + return ret; + } + + ret = tz->ops->get_trip_type(tz, trip, &type); + if (ret) + return ret; + + thermal_notify_tz_trip_change(tz->id, trip, type, temperature, hyst); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return count; @@ -428,30 +429,13 @@ static struct attribute_group thermal_zone_attribute_group = { .attrs = thermal_zone_dev_attrs, }; -/* We expose mode only if .get_mode is present */ static struct attribute *thermal_zone_mode_attrs[] = { &dev_attr_mode.attr, NULL, }; -static umode_t thermal_zone_mode_is_visible(struct kobject *kobj, - struct attribute *attr, - int attrno) -{ - struct device *dev = container_of(kobj, struct device, kobj); - struct thermal_zone_device *tz; - - tz = container_of(dev, struct thermal_zone_device, device); - - if (tz->ops->get_mode) - return attr->mode; - - return 0; -} - static struct attribute_group thermal_zone_mode_attribute_group = { .attrs = thermal_zone_mode_attrs, - .is_visible = thermal_zone_mode_is_visible, }; /* We expose passive only if passive trips are present */ diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 85776db4bf34..2ce4b19f312a 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, data = ti_bandgap_get_sensor_data(bgp, id); - if (!IS_ERR_OR_NULL(data)) + if (IS_ERR_OR_NULL(data)) data = ti_thermal_build_data(bgp, id); if (!data) diff --git a/include/linux/clock_cooling.h b/include/linux/clock_cooling.h deleted file mode 100644 index 4b0a69863656..000000000000 --- a/include/linux/clock_cooling.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/include/linux/clock_cooling.h - * - * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com> - * - * Copyright (C) 2013 Texas Instruments Inc. - * Contact: Eduardo Valentin <eduardo.valentin@ti.com> - * - * Highly based on cpufreq_cooling.c. - * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) - * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> - */ - -#ifndef __CPU_COOLING_H__ -#define __CPU_COOLING_H__ - -#include <linux/of.h> -#include <linux/thermal.h> -#include <linux/cpumask.h> - -#ifdef CONFIG_CLOCK_THERMAL -/** - * clock_cooling_register - function to create clock cooling device. - * @dev: struct device pointer to the device used as clock cooling device. - * @clock_name: string containing the clock used as cooling mechanism. - */ -struct thermal_cooling_device * -clock_cooling_register(struct device *dev, const char *clock_name); - -/** - * clock_cooling_unregister - function to remove clock cooling device. - * @cdev: thermal cooling device pointer. - */ -void clock_cooling_unregister(struct thermal_cooling_device *cdev); - -unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, - unsigned long freq); -#else /* !CONFIG_CLOCK_THERMAL */ -static inline struct thermal_cooling_device * -clock_cooling_register(struct device *dev, const char *clock_name) -{ - return NULL; -} -static inline -void clock_cooling_unregister(struct thermal_cooling_device *cdev) -{ -} -static inline -unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, - unsigned long freq) -{ - return THERMAL_CSTATE_INVALID; -} -#endif /* CONFIG_CLOCK_THERMAL */ - -#endif /* __CPU_COOLING_H__ */ diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h index 79a6e37a1d6f..9df2dfca68dd 100644 --- a/include/linux/devfreq_cooling.h +++ b/include/linux/devfreq_cooling.h @@ -1,17 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * devfreq_cooling: Thermal cooling device implementation for devices using * devfreq * * Copyright (C) 2014-2015 ARM Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __DEVFREQ_COOLING_H__ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 216185bb3014..42ef807e5d84 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -37,18 +37,6 @@ struct thermal_cooling_device; struct thermal_instance; struct thermal_attr; -enum thermal_device_mode { - THERMAL_DEVICE_DISABLED = 0, - THERMAL_DEVICE_ENABLED, -}; - -enum thermal_trip_type { - THERMAL_TRIP_ACTIVE = 0, - THERMAL_TRIP_PASSIVE, - THERMAL_TRIP_HOT, - THERMAL_TRIP_CRITICAL, -}; - enum thermal_trend { THERMAL_TREND_STABLE, /* temperature is stable */ THERMAL_TREND_RAISING, /* temperature is raising */ @@ -76,9 +64,7 @@ struct thermal_zone_device_ops { struct thermal_cooling_device *); int (*get_temp) (struct thermal_zone_device *, int *); int (*set_trips) (struct thermal_zone_device *, int, int); - int (*get_mode) (struct thermal_zone_device *, - enum thermal_device_mode *); - int (*set_mode) (struct thermal_zone_device *, + int (*change_mode) (struct thermal_zone_device *, enum thermal_device_mode); int (*get_trip_type) (struct thermal_zone_device *, int, enum thermal_trip_type *); @@ -128,6 +114,7 @@ struct thermal_cooling_device { * @trip_temp_attrs: attributes for trip points for sysfs: trip temperature * @trip_type_attrs: attributes for trip points for sysfs: trip type * @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis + * @mode: current mode of this thermal zone * @devdata: private pointer for device private data * @trips: number of trip points the thermal zone supports * @trips_disabled; bitmap for disabled trips @@ -170,6 +157,7 @@ struct thermal_zone_device { struct thermal_attr *trip_temp_attrs; struct thermal_attr *trip_type_attrs; struct thermal_attr *trip_hyst_attrs; + enum thermal_device_mode mode; void *devdata; int trips; unsigned long trips_disabled; /* bitmap for disabled trips */ @@ -303,11 +291,6 @@ struct thermal_zone_params { int offset; }; -struct thermal_genl_event { - u32 orig; - enum events event; -}; - /** * struct thermal_zone_of_device_ops - scallbacks for handling DT based zones * @@ -416,6 +399,8 @@ int thermal_zone_get_offset(struct thermal_zone_device *tz); void thermal_cdev_update(struct thermal_cooling_device *); void thermal_notify_framework(struct thermal_zone_device *, int); +int thermal_zone_device_enable(struct thermal_zone_device *tz); +int thermal_zone_device_disable(struct thermal_zone_device *tz); #else static inline struct thermal_zone_device *thermal_zone_device_register( const char *type, int trips, int mask, void *devdata, @@ -463,6 +448,12 @@ static inline void thermal_cdev_update(struct thermal_cooling_device *cdev) static inline void thermal_notify_framework(struct thermal_zone_device *tz, int trip) { } + +static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) +{ return -ENODEV; } + +static inline int thermal_zone_device_disable(struct thermal_zone_device *tz) +{ return -ENODEV; } #endif /* CONFIG_THERMAL */ #endif /* __THERMAL_H__ */ diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h index 96218378dda8..c105054cbb57 100644 --- a/include/uapi/linux/thermal.h +++ b/include/uapi/linux/thermal.h @@ -4,31 +4,86 @@ #define THERMAL_NAME_LENGTH 20 -/* Adding event notification support elements */ -#define THERMAL_GENL_FAMILY_NAME "thermal_event" -#define THERMAL_GENL_VERSION 0x01 -#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_grp" - -/* Events supported by Thermal Netlink */ -enum events { - THERMAL_AUX0, - THERMAL_AUX1, - THERMAL_CRITICAL, - THERMAL_DEV_FAULT, +enum thermal_device_mode { + THERMAL_DEVICE_DISABLED = 0, + THERMAL_DEVICE_ENABLED, +}; + +enum thermal_trip_type { + THERMAL_TRIP_ACTIVE = 0, + THERMAL_TRIP_PASSIVE, + THERMAL_TRIP_HOT, + THERMAL_TRIP_CRITICAL, }; -/* attributes of thermal_genl_family */ -enum { +/* Adding event notification support elements */ +#define THERMAL_GENL_FAMILY_NAME "thermal" +#define THERMAL_GENL_VERSION 0x01 +#define THERMAL_GENL_SAMPLING_GROUP_NAME "sampling" +#define THERMAL_GENL_EVENT_GROUP_NAME "event" + +/* Attributes of thermal_genl_family */ +enum thermal_genl_attr { THERMAL_GENL_ATTR_UNSPEC, - THERMAL_GENL_ATTR_EVENT, + THERMAL_GENL_ATTR_TZ, + THERMAL_GENL_ATTR_TZ_ID, + THERMAL_GENL_ATTR_TZ_TEMP, + THERMAL_GENL_ATTR_TZ_TRIP, + THERMAL_GENL_ATTR_TZ_TRIP_ID, + THERMAL_GENL_ATTR_TZ_TRIP_TYPE, + THERMAL_GENL_ATTR_TZ_TRIP_TEMP, + THERMAL_GENL_ATTR_TZ_TRIP_HYST, + THERMAL_GENL_ATTR_TZ_MODE, + THERMAL_GENL_ATTR_TZ_NAME, + THERMAL_GENL_ATTR_TZ_CDEV_WEIGHT, + THERMAL_GENL_ATTR_TZ_GOV, + THERMAL_GENL_ATTR_TZ_GOV_NAME, + THERMAL_GENL_ATTR_CDEV, + THERMAL_GENL_ATTR_CDEV_ID, + THERMAL_GENL_ATTR_CDEV_CUR_STATE, + THERMAL_GENL_ATTR_CDEV_MAX_STATE, + THERMAL_GENL_ATTR_CDEV_NAME, + THERMAL_GENL_ATTR_GOV_NAME, + __THERMAL_GENL_ATTR_MAX, }; #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) -/* commands supported by the thermal_genl_family */ -enum { +enum thermal_genl_sampling { + THERMAL_GENL_SAMPLING_TEMP, + __THERMAL_GENL_SAMPLING_MAX, +}; +#define THERMAL_GENL_SAMPLING_MAX (__THERMAL_GENL_SAMPLING_MAX - 1) + +/* Events of thermal_genl_family */ +enum thermal_genl_event { + THERMAL_GENL_EVENT_UNSPEC, + THERMAL_GENL_EVENT_TZ_CREATE, /* Thermal zone creation */ + THERMAL_GENL_EVENT_TZ_DELETE, /* Thermal zone deletion */ + THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabed */ + THERMAL_GENL_EVENT_TZ_ENABLE, /* Thermal zone enabled */ + THERMAL_GENL_EVENT_TZ_TRIP_UP, /* Trip point crossed the way up */ + THERMAL_GENL_EVENT_TZ_TRIP_DOWN, /* Trip point crossed the way down */ + THERMAL_GENL_EVENT_TZ_TRIP_CHANGE, /* Trip point changed */ + THERMAL_GENL_EVENT_TZ_TRIP_ADD, /* Trip point added */ + THERMAL_GENL_EVENT_TZ_TRIP_DELETE, /* Trip point deleted */ + THERMAL_GENL_EVENT_CDEV_ADD, /* Cdev bound to the thermal zone */ + THERMAL_GENL_EVENT_CDEV_DELETE, /* Cdev unbound */ + THERMAL_GENL_EVENT_CDEV_STATE_UPDATE, /* Cdev state updated */ + THERMAL_GENL_EVENT_TZ_GOV_CHANGE, /* Governor policy changed */ + __THERMAL_GENL_EVENT_MAX, +}; +#define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1) + +/* Commands supported by the thermal_genl_family */ +enum thermal_genl_cmd { THERMAL_GENL_CMD_UNSPEC, - THERMAL_GENL_CMD_EVENT, + THERMAL_GENL_CMD_TZ_GET_ID, /* List of thermal zones id */ + THERMAL_GENL_CMD_TZ_GET_TRIP, /* List of thermal trips */ + THERMAL_GENL_CMD_TZ_GET_TEMP, /* Get the thermal zone temperature */ + THERMAL_GENL_CMD_TZ_GET_GOV, /* Get the thermal zone governor */ + THERMAL_GENL_CMD_TZ_GET_MODE, /* Get the thermal zone mode */ + THERMAL_GENL_CMD_CDEV_GET, /* List of cdev id */ __THERMAL_GENL_CMD_MAX, }; #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 9395ee8a868d..1eb65a7a27fd 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -1192,7 +1192,7 @@ problem: panic("GENL: Cannot register controller: %d\n", err); } -subsys_initcall(genl_init); +core_initcall(genl_init); static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group, gfp_t flags) |