diff options
| -rw-r--r-- | sound/soc/codecs/max98373.c | 4 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_asrc_dma.c | 11 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_sai.c | 2 | ||||
| -rw-r--r-- | sound/soc/sof/ipc4-topology.c | 10 | ||||
| -rw-r--r-- | sound/soc/sof/pm.c | 8 |
5 files changed, 24 insertions, 11 deletions
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index f90a6a7ba83b..fde055c6c894 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -31,7 +31,7 @@ static int max98373_dac_event(struct snd_soc_dapm_widget *w, MAX98373_GLOBAL_EN_MASK, 1); usleep_range(30000, 31000); break; - case SND_SOC_DAPM_POST_PMD: + case SND_SOC_DAPM_PRE_PMD: regmap_update_bits(max98373->regmap, MAX98373_R20FF_GLOBAL_SHDN, MAX98373_GLOBAL_EN_MASK, 0); @@ -64,7 +64,7 @@ static const struct snd_kcontrol_new max98373_spkfb_control = static const struct snd_soc_dapm_widget max98373_dapm_widgets[] = { SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", MAX98373_R202B_PCM_RX_EN, 0, 0, max98373_dac_event, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, &max98373_dai_controls), SND_SOC_DAPM_OUTPUT("BE_OUT"), diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index 3b81a465814a..05a7d1588d20 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -209,14 +209,19 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, be_chan = soc_component_to_pcm(component_be)->chan[substream->stream]; tmp_chan = be_chan; } - if (!tmp_chan) - tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx"); + if (!tmp_chan) { + tmp_chan = dma_request_chan(dev_be, tx ? "tx" : "rx"); + if (IS_ERR(tmp_chan)) { + dev_err(dev, "failed to request DMA channel for Back-End\n"); + return -EINVAL; + } + } /* * An EDMA DEV_TO_DEV channel is fixed and bound with DMA event of each * peripheral, unlike SDMA channel that is allocated dynamically. So no * need to configure dma_request and dma_request2, but get dma_chan of - * Back-End device directly via dma_request_slave_channel. + * Back-End device directly via dma_request_chan. */ if (!asrc->use_edma) { /* Get DMA request of Back-End */ diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 1b197478b3d9..990bba0be1fb 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -1546,7 +1546,7 @@ static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = { .use_imx_pcm = true, .use_edma = true, .fifo_depth = 64, - .pins = 1, + .pins = 4, .reg_offset = 0, .mclk0_is_mclk1 = false, .flags = 0, diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 669b99a4f76e..3a5394c3dd83 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1806,10 +1806,12 @@ static int sof_ipc4_route_setup(struct snd_sof_dev *sdev, struct snd_sof_route * int ret; if (!src_fw_module || !sink_fw_module) { - /* The NULL module will print as "(efault)" */ - dev_err(sdev->dev, "source %s or sink %s widget weren't set up properly\n", - src_fw_module->man4_module_entry.name, - sink_fw_module->man4_module_entry.name); + dev_err(sdev->dev, + "cannot bind %s -> %s, no firmware module for: %s%s\n", + src_widget->widget->name, sink_widget->widget->name, + src_fw_module ? "" : " source", + sink_fw_module ? "" : " sink"); + return -ENODEV; } diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c index 8d3383085d12..85412aeb1ca1 100644 --- a/sound/soc/sof/pm.c +++ b/sound/soc/sof/pm.c @@ -183,6 +183,7 @@ static int sof_suspend(struct device *dev, bool runtime_suspend) const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); pm_message_t pm_state; u32 target_state = snd_sof_dsp_power_target(sdev); + u32 old_state = sdev->dsp_power_state.state; int ret; /* do nothing if dsp suspend callback is not set */ @@ -192,7 +193,12 @@ static int sof_suspend(struct device *dev, bool runtime_suspend) if (runtime_suspend && !sof_ops(sdev)->runtime_suspend) return 0; - if (tplg_ops && tplg_ops->tear_down_all_pipelines) + /* we need to tear down pipelines only if the DSP hardware is + * active, which happens for PCI devices. if the device is + * suspended, it is brought back to full power and then + * suspended again + */ + if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0)) tplg_ops->tear_down_all_pipelines(sdev, false); if (sdev->fw_state != SOF_FW_BOOT_COMPLETE) |