diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/socionext-netsec.txt | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/socionext/netsec.c | 24 |
2 files changed, 20 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt index 9d6c9feb12ff..a3c1dffaa4bb 100644 --- a/Documentation/devicetree/bindings/net/socionext-netsec.txt +++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt @@ -30,7 +30,9 @@ Optional properties: (See ethernet.txt file in the same directory) - max-frame-size: See ethernet.txt in the same directory. The MAC address will be determined using the optional properties -defined in ethernet.txt. +defined in ethernet.txt. The 'phy-mode' property is required, but may +be set to the empty string if the PHY configuration is programmed by +the firmware or set by hardware straps, and needs to be preserved. Example: eth0: ethernet@522d0000 { diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 806eb651cea3..1503cc9ec6e2 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -6,6 +6,7 @@ #include <linux/pm_runtime.h> #include <linux/acpi.h> #include <linux/of_mdio.h> +#include <linux/of_net.h> #include <linux/etherdevice.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -1833,6 +1834,14 @@ static const struct net_device_ops netsec_netdev_ops = { static int netsec_of_probe(struct platform_device *pdev, struct netsec_priv *priv, u32 *phy_addr) { + int err; + + err = of_get_phy_mode(pdev->dev.of_node, &priv->phy_interface); + if (err) { + dev_err(&pdev->dev, "missing required property 'phy-mode'\n"); + return err; + } + priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); if (!priv->phy_np) { dev_err(&pdev->dev, "missing required property 'phy-handle'\n"); @@ -1859,6 +1868,14 @@ static int netsec_acpi_probe(struct platform_device *pdev, if (!IS_ENABLED(CONFIG_ACPI)) return -ENODEV; + /* ACPI systems are assumed to configure the PHY in firmware, so + * there is really no need to discover the PHY mode from the DSDT. + * Since firmware is known to exist in the field that configures the + * PHY correctly but passes the wrong mode string in the phy-mode + * device property, we have no choice but to ignore it. + */ + priv->phy_interface = PHY_INTERFACE_MODE_NA; + ret = device_property_read_u32(&pdev->dev, "phy-channel", phy_addr); if (ret) { dev_err(&pdev->dev, @@ -1995,13 +2012,6 @@ static int netsec_probe(struct platform_device *pdev) priv->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | NETIF_MSG_LINK | NETIF_MSG_PROBE; - priv->phy_interface = device_get_phy_mode(&pdev->dev); - if ((int)priv->phy_interface < 0) { - dev_err(&pdev->dev, "missing required property 'phy-mode'\n"); - ret = -ENODEV; - goto free_ndev; - } - priv->ioaddr = devm_ioremap(&pdev->dev, mmio_res->start, resource_size(mmio_res)); if (!priv->ioaddr) { |