diff options
31 files changed, 1893 insertions, 372 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl new file mode 100644 index 000000000000..7ac7d7262bb7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl @@ -0,0 +1,23 @@ +What: /sys/devices/platform/<i2c-demux-name>/cur_master +Date: January 2016 +KernelVersion: 4.6 +Contact: Wolfram Sang <wsa@the-dreams.de> +Description: + +This file selects the active I2C master for a demultiplexed bus. + +Write 0 there for the first master, 1 for the second etc. Reading the file will +give you a list with the active master marked. Example from a Renesas Lager +board: + +root@Lager:~# cat /sys/devices/platform/i2c@8/cur_master +* 0 - /i2c@9 + 1 - /i2c@e6520000 + 2 - /i2c@e6530000 + +root@Lager:~# echo 2 > /sys/devices/platform/i2c@8/cur_master + +root@Lager:~# cat /sys/devices/platform/i2c@8/cur_master + 0 - /i2c@9 + 1 - /i2c@e6520000 +* 2 - /i2c@e6530000 diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt new file mode 100644 index 000000000000..6078aefe7ed4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -0,0 +1,135 @@ +Pinctrl-based I2C Bus DeMux + +This binding describes an I2C bus demultiplexer that uses pin multiplexing to +route the I2C signals, and represents the pin multiplexing configuration using +the pinctrl device tree bindings. This may be used to select one I2C IP core at +runtime which may have a better feature set for a given task than another I2C +IP core on the SoC. The most simple example is to fall back to GPIO bitbanging +if your current runtime configuration hits an errata of the internal IP core. + + +-------------------------------+ + | SoC | + | | +-----+ +-----+ + | +------------+ | | dev | | dev | + | |I2C IP Core1|--\ | +-----+ +-----+ + | +------------+ \-------+ | | | + | |Pinctrl|--|------+--------+ + | +------------+ +-------+ | + | |I2C IP Core2|--/ | + | +------------+ | + | | + +-------------------------------+ + +Required properties: +- compatible: "i2c-demux-pinctrl" +- i2c-parent: List of phandles of I2C masters available for selection. The first + one will be used as default. +- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C + parents. + +Furthermore, I2C mux properties and child nodes. See mux.txt in this directory. + +Example: + +Here is a snipplet for a bus to be demuxed. It contains various i2c clients for +HDMI, so the bus is named "i2c-hdmi": + + i2chdmi: i2c@8 { + + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4643: sound-codec@12 { + compatible = "asahi-kasei,ak4643"; + + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +And for clarification, here are the snipplets for the i2c-parents: + + gpioi2c: i2c@9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */ + &gpio5 5 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + +... + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "i2c-hdmi"; + + clock-frequency = <100000>; +}; + +... + +&iic2 { + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "i2c-hdmi"; + + clock-frequency = <100000>; +}; + +Please note: + +- pinctrl properties for the parent I2C controllers need a pinctrl state + with the same name as i2c-bus-name, not "default"! + +- the i2c masters must have their status "disabled". This driver will + enable them at runtime when needed. diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt index eab5836ba7f9..b967544590e8 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -11,7 +11,7 @@ Required properties: Optional properties: - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. - The absence of the propoerty indicates the default frequency 100 kHz. + The absence of the property indicates the default frequency 100 kHz. - dmas: A list of two dma specifiers, one for each entry in dma-names. - dma-names: should contain "tx" and "rx". - scl-gpios: specify the gpio related to SCL pin diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index 95e97223a71c..cf8bfc956cdc 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -17,7 +17,7 @@ Required properties: Optional properties: - clock-frequency: desired I2C bus clock frequency in Hz. The absence of this - propoerty indicates the default frequency 100 kHz. + property indicates the default frequency 100 kHz. - clocks: clock specifier. - i2c-scl-falling-time-ns: see i2c.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-sirf.txt b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt index 7baf9e133fa8..2701eefb00f7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sirf.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt @@ -8,7 +8,7 @@ Required properties : Optional properties: - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. - The absence of the propoerty indicates the default frequency 100 kHz. + The absence of the property indicates the default frequency 100 kHz. Examples : diff --git a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt index ceabbe91ae44..caf42e989462 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt @@ -6,14 +6,17 @@ Required properties: - interrupts : IIC controller unterrupt - #address-cells = <1> - #size-cells = <0> +- clocks: Input clock specifier. Refer to common clock bindings. Optional properties: - Child nodes conforming to i2c bus binding +- clock-names: Input clock name, should be 'pclk'. Example: axi_iic_0: i2c@40800000 { compatible = "xlnx,xps-iic-2.00.a"; + clocks = <&clkc 15>; interrupts = < 1 2 >; reg = < 0x40800000 0x10000 >; diff --git a/MAINTAINERS b/MAINTAINERS index cc637cd31f3b..0f3063cce44c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5270,6 +5270,16 @@ F: include/linux/hyperv.h F: tools/hv/ F: Documentation/ABI/stable/sysfs-bus-vmbus +I2C MUXES +M: Peter Rosin <peda@axentia.se> +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/muxes/ +F: Documentation/devicetree/bindings/i2c/i2c-mux* +F: drivers/i2c/i2c-mux.c +F: drivers/i2c/muxes/ +F: include/linux/i2c-mux.h + I2C OVER PARALLEL PORT M: Jean Delvare <jdelvare@suse.com> L: linux-i2c@vger.kernel.org @@ -9676,9 +9686,9 @@ F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt F: drivers/net/ethernet/synopsys/dwc_eth_qos.c SYNOPSYS DESIGNWARE I2C DRIVER -M: Andy Shevchenko <andriy.shevchenko@linux.intel.com> M: Jarkko Nikula <jarkko.nikula@linux.intel.com> -M: Mika Westerberg <mika.westerberg@linux.intel.com> +R: Andy Shevchenko <andriy.shevchenko@linux.intel.com> +R: Mika Westerberg <mika.westerberg@linux.intel.com> L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-designware-* diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 0299dfa746a3..faa8e6821fea 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -789,7 +789,7 @@ config I2C_QUP config I2C_RIIC tristate "Renesas RIIC adapter" - depends on ARCH_SHMOBILE || COMPILE_TEST + depends on ARCH_RENESAS || COMPILE_TEST help If you say yes to this option, support will be included for the Renesas RIIC I2C interface. @@ -833,7 +833,7 @@ config I2C_SH7760 config I2C_SH_MOBILE tristate "SuperH Mobile I2C Controller" depends on HAS_DMA - depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + depends on SUPERH || ARCH_RENESAS || COMPILE_TEST help If you say yes to this option, support will be included for the built-in I2C interface on the Renesas SH-Mobile processor. @@ -908,7 +908,7 @@ config I2C_TEGRA config I2C_UNIPHIER tristate "UniPhier FIFO-less I2C controller" - depends on ARCH_UNIPHIER + depends on ARCH_UNIPHIER || COMPILE_TEST help If you say yes to this option, support will be included for the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8, @@ -916,7 +916,7 @@ config I2C_UNIPHIER config I2C_UNIPHIER_F tristate "UniPhier FIFO-builtin I2C controller" - depends on ARCH_UNIPHIER + depends on ARCH_UNIPHIER || COMPILE_TEST help If you say yes to this option, support will be included for the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4, @@ -985,7 +985,7 @@ config I2C_XLP9XX config I2C_RCAR tristate "Renesas R-Car I2C Controller" - depends on ARCH_SHMOBILE || COMPILE_TEST + depends on ARCH_RENESAS || COMPILE_TEST select I2C_SLAVE help If you say yes to this option, support will be included for the diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 0419f5284609..b9f0fff4e723 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -58,11 +58,13 @@ #define IE_M_RX_FIFO_FULL_SHIFT 31 #define IE_M_RX_THLD_SHIFT 30 #define IE_M_START_BUSY_SHIFT 28 +#define IE_M_TX_UNDERRUN_SHIFT 27 #define IS_OFFSET 0x3c #define IS_M_RX_FIFO_FULL_SHIFT 31 #define IS_M_RX_THLD_SHIFT 30 #define IS_M_START_BUSY_SHIFT 28 +#define IS_M_TX_UNDERRUN_SHIFT 27 #define M_TX_OFFSET 0x40 #define M_TX_WR_STATUS_SHIFT 31 @@ -76,7 +78,7 @@ #define M_RX_DATA_SHIFT 0 #define M_RX_DATA_MASK 0xff -#define I2C_TIMEOUT_MESC 100 +#define I2C_TIMEOUT_MSEC 50000 #define M_TX_RX_FIFO_SIZE 64 enum bus_speed_index { @@ -95,12 +97,17 @@ struct bcm_iproc_i2c_dev { struct completion done; int xfer_is_done; + + struct i2c_msg *msg; + + /* bytes that have been transferred */ + unsigned int tx_bytes; }; /* * Can be expanded in the future if more interrupt status bits are utilized */ -#define ISR_MASK (1 << IS_M_START_BUSY_SHIFT) +#define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT)) static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) { @@ -112,13 +119,95 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) if (!status) return IRQ_NONE; + /* TX FIFO is empty and we have more data to send */ + if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) { + struct i2c_msg *msg = iproc_i2c->msg; + unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes; + unsigned int i; + u32 val; + + /* can only fill up to the FIFO size */ + tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE); + for (i = 0; i < tx_bytes; i++) { + /* start from where we left over */ + unsigned int idx = iproc_i2c->tx_bytes + i; + + val = msg->buf[idx]; + + /* mark the last byte */ + if (idx == msg->len - 1) { + u32 tmp; + + val |= BIT(M_TX_WR_STATUS_SHIFT); + + /* + * Since this is the last byte, we should + * now disable TX FIFO underrun interrupt + */ + tmp = readl(iproc_i2c->base + IE_OFFSET); + tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT); + writel(tmp, iproc_i2c->base + IE_OFFSET); + } + + /* load data into TX FIFO */ + writel(val, iproc_i2c->base + M_TX_OFFSET); + } + /* update number of transferred bytes */ + iproc_i2c->tx_bytes += tx_bytes; + } + + if (status & BIT(IS_M_START_BUSY_SHIFT)) { + iproc_i2c->xfer_is_done = 1; + complete_all(&iproc_i2c->done); + } + writel(status, iproc_i2c->base + IS_OFFSET); - iproc_i2c->xfer_is_done = 1; - complete_all(&iproc_i2c->done); return IRQ_HANDLED; } +static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + u32 val; + + /* put controller in reset */ + val = readl(iproc_i2c->base + CFG_OFFSET); + val |= 1 << CFG_RESET_SHIFT; + val &= ~(1 << CFG_EN_SHIFT); + writel(val, iproc_i2c->base + CFG_OFFSET); + + /* wait 100 usec per spec */ + udelay(100); + + /* bring controller out of reset */ + val &= ~(1 << CFG_RESET_SHIFT); + writel(val, iproc_i2c->base + CFG_OFFSET); + + /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ + val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT); + writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + /* disable all interrupts */ + writel(0, iproc_i2c->base + IE_OFFSET); + + /* clear all pending interrupts */ + writel(0xffffffff, iproc_i2c->base + IS_OFFSET); + + return 0; +} + +static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, + bool enable) +{ + u32 val; + + val = readl(iproc_i2c->base + CFG_OFFSET); + if (enable) + val |= BIT(CFG_EN_SHIFT); + else + val &= ~BIT(CFG_EN_SHIFT); + writel(val, iproc_i2c->base + CFG_OFFSET); +} + static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, struct i2c_msg *msg) { @@ -149,6 +238,12 @@ static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, default: dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val); + + /* re-initialize i2c for recovery */ + bcm_iproc_i2c_enable_disable(iproc_i2c, false); + bcm_iproc_i2c_init(iproc_i2c); + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + return -EIO; } } @@ -159,7 +254,8 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, int ret, i; u8 addr; u32 val; - unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC); + unsigned int tx_bytes; + unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC); /* check if bus is busy */ if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) & @@ -168,13 +264,20 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, return -EBUSY; } + iproc_i2c->msg = msg; + /* format and load slave address into the TX FIFO */ addr = msg->addr << 1 | (msg->flags & I2C_M_RD ? 1 : 0); writel(addr, iproc_i2c->base + M_TX_OFFSET); - /* for a write transaction, load data into the TX FIFO */ + /* + * For a write transaction, load data into the TX FIFO. Only allow + * loading up to TX FIFO size - 1 bytes of data since the first byte + * has been used up by the slave address + */ + tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1); if (!(msg->flags & I2C_M_RD)) { - for (i = 0; i < msg->len; i++) { + for (i = 0; i < tx_bytes; i++) { val = msg->buf[i]; /* mark the last byte */ @@ -183,6 +286,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, writel(val, iproc_i2c->base + M_TX_OFFSET); } + iproc_i2c->tx_bytes = tx_bytes; } /* mark as incomplete before starting the transaction */ @@ -194,13 +298,24 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, * transaction is done, i.e., the internal start_busy bit, transitions * from 1 to 0. */ - writel(1 << IE_M_START_BUSY_SHIFT, iproc_i2c->base + IE_OFFSET); + val = BIT(IE_M_START_BUSY_SHIFT); + + /* + * If TX data size is larger than the TX FIFO, need to enable TX + * underrun interrupt, which will be triggerred when the TX FIFO is + * empty. When that happens we can then pump more data into the FIFO + */ + if (!(msg->flags & I2C_M_RD) && + msg->len > iproc_i2c->tx_bytes) + val |= BIT(IE_M_TX_UNDERRUN_SHIFT); + + writel(val, iproc_i2c->base + IE_OFFSET); /* * Now we can activate the transfer. For a read operation, specify the * number of bytes to read */ - val = 1 << M_CMD_START_BUSY_SHIFT; + val = BIT(M_CMD_START_BUSY_SHIFT); if (msg->flags & I2C_M_RD) { val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) | (msg->len << M_CMD_RD_CNT_SHIFT); @@ -283,7 +398,6 @@ static const struct i2c_algorithm bcm_iproc_algo = { static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { /* need to reserve one byte in the FIFO for the slave address */ .max_read_len = M_TX_RX_FIFO_SIZE - 1, - .max_write_len = M_TX_RX_FIFO_SIZE - 1, }; static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) @@ -321,49 +435,6 @@ static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) return 0; } -static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) -{ - u32 val; - - /* put controller in reset */ - val = readl(iproc_i2c->base + CFG_OFFSET); - val |= 1 << CFG_RESET_SHIFT; - val &= ~(1 << CFG_EN_SHIFT); - writel(val, iproc_i2c->base + CFG_OFFSET); - - /* wait 100 usec per spec */ - udelay(100); - - /* bring controller out of reset */ - val &= ~(1 << CFG_RESET_SHIFT); - writel(val, iproc_i2c->base + CFG_OFFSET); - - /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ - val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT); - writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); - - /* disable all interrupts */ - writel(0, iproc_i2c->base + IE_OFFSET); - - /* clear all pending interrupts */ - writel(0xffffffff, iproc_i2c->base + IS_OFFSET); - - return 0; -} - -static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, - bool enable) -{ - u32 val; - - val = readl(iproc_i2c->base + CFG_OFFSET); - if (enable) - val |= BIT(CFG_EN_SHIFT); - else - val &= ~BIT(CFG_EN_SHIFT); - writel(val, iproc_i2c->base + CFG_OFFSET); -} - static int bcm_iproc_i2c_probe(struct platform_device *pdev) { int irq, ret = 0; diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 6b08d1607b7a..90bbd9f9dd8f 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -124,6 +124,8 @@ /** * struct cdns_i2c - I2C device private data structure + * + * @dev: Pointer to device structure * @membase: Base address of the I2C device * @adap: I2C adapter instance * @p_msg: Message pointer @@ -171,7 +173,7 @@ struct cdns_platform_data { clk_rate_change_nb) /** - * cdns_i2c_clear_bus_hold() - Clear bus hold bit + * cdns_i2c_clear_bus_hold - Clear bus hold bit * @id: Pointer to driver data struct * * Helper to clear the controller's bus hold bit. @@ -815,8 +817,8 @@ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long } /** - * cdns_i2c_suspend - Suspend method for the driver - * @_dev: Address of the platform_device structure + * cdns_i2c_runtime_suspend - Runtime suspend method for the driver + * @dev: Address of the platform_device structure * * Put the driver into low power mode. * @@ -833,10 +835,10 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev) } /** - * cdns_i2c_resume - Resume from suspend - * @_dev: Address of the platform_device structure + * cdns_i2c_runtime_resume - Runtime resume + * @dev: Address of the platform_device structure * - * Resume operation after suspend. + * Runtime resume callback. * * Return: 0 on success and error value on error */ diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c index e38c2bbba940..1590ad0a8081 100644 --- a/drivers/i2c/busses/i2c-designware-baytrail.c +++ b/drivers/i2c/busses/i2c-designware-baytrail.c @@ -11,7 +11,6 @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. */ -#include <linux/module.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/acpi.h> @@ -151,7 +150,3 @@ int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev) return 0; } - -MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>"); -MODULE_DESCRIPTION("Baytrail I2C Semaphore driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 10fbd6d841e0..99b54be6ba73 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -634,7 +634,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); - mutex_lock(&dev->lock); pm_runtime_get_sync(dev->dev); reinit_completion(&dev->cmd_complete); @@ -673,11 +672,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) } /* - * We must disable the adapter before unlocking the &dev->lock mutex - * below. Otherwise the hardware might continue generating interrupts - * which in turn causes a race condition with the following transfer. - * Needs some more investigation if the additional interrupts are - * a hardware bug or this driver doesn't handle them correctly yet. + * We must disable the adapter before returning and signaling the end + * of the current transfer. Otherwise the hardware might continue + * generating interrupts which in turn causes a race condition with + * the following transfer. Needs some more investigation if the + * additional interrupts are a hardware bug or this driver doesn't + * handle them correctly yet. */ __i2c_dw_enable(dev, false); @@ -706,7 +706,6 @@ done: done_nolock: pm_runtime_mark_last_busy(dev->dev); pm_runtime_put_autosuspend(dev->dev); - mutex_unlock(&dev->lock); return ret; } @@ -860,7 +859,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) int r; init_completion(&dev->cmd_complete); - mutex_init(&dev->lock); r = i2c_dw_init(dev); if (r) @@ -883,9 +881,17 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) return r; } + /* + * Increment PM usage count during adapter registration in order to + * avoid possible spurious runtime suspend when adapter device is + * registered to the device core and immediate resume in case bus has + * registered I2C slaves that do I2C transfers in their probe. + */ + pm_runtime_get_noresume(dev->dev); r = i2c_add_numbered_adapter(adap); if (r) dev_err(dev->dev, "failure adding adapter: %d\n", r); + pm_runtime_put_noidle(dev->dev); return r; } diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 9ffb63a60f95..cd409e7fbc71 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -36,7 +36,6 @@ * @dev: driver model device node * @base: IO registers pointer * @cmd_complete: tx completion indicator - * @lock: protect this struct and IO registers * @clk: input reference clock * @cmd_err: run time hadware error code * @msgs: points to an array of messages currently being transfered @@ -73,7 +72,6 @@ struct dw_i2c_dev { struct device *dev; void __iomem *base; struct completion cmd_complete; - struct mutex lock; struct clk *clk; u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); struct dw_pci_controller *controller; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 27fa0cb09538..585a3b7915bd 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -184,7 +184,7 @@ /* Older devices have their ID defined in <linux/pci_ids.h> */ #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 -#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 +#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ @@ -193,9 +193,11 @@ #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c +#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 @@ -204,10 +206,8 @@ #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 -#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 -#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df -#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index a2b132cef717..1ca7ef2314f7 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -212,7 +212,7 @@ struct imx_i2c_struct { struct imx_i2c_dma *dma; }; -static const struct imx_i2c_hwdata imx1_i2c_hwdata = { +static const struct imx_i2c_hwdata imx1_i2c_hwdata = { .devtype = IMX1_I2C, .regshift = IMX_I2C_REGSHIFT, .clk_div = imx_i2c_clk_div, @@ -222,7 +222,7 @@ static const struct imx_i2c_hwdata imx1_i2c_hwdata = { }; -static const struct imx_i2c_hwdata imx21_i2c_hwdata = { +static const struct imx_i2c_hwdata imx21_i2c_hwdata = { .devtype = IMX21_I2C, .regshift = IMX_I2C_REGSHIFT, .clk_div = imx_i2c_clk_div, @@ -871,7 +871,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo if ((!i) && block_data) msgs->buf[0] = len; else - msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); + msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); dev_dbg(&i2c_imx->adapter.dev, "<%s> read byte: B%d=0x%X\n", __func__, i, msgs->buf[i]); @@ -916,7 +916,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_RSTA; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - result = i2c_imx_bus_busy(i2c_imx, 1); + result = i2c_imx_bus_busy(i2c_imx, 1); if (result) goto fail0; } @@ -1192,7 +1192,7 @@ static int i2c_imx_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int i2c_imx_runtime_suspend(struct device *dev) { - struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); + struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); clk_disable_unprepare(i2c_imx->clk); @@ -1201,7 +1201,7 @@ static int i2c_imx_runtime_suspend(struct device *dev) static int i2c_imx_runtime_resume(struct device *dev) { - struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); + struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); int ret; ret = clk_prepare_enable(i2c_imx->clk); diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index aec8e6ce38a4..453358b4d9ca 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -60,6 +60,7 @@ #define I2C_DMA_INT_FLAG_NONE 0x0000 #define I2C_DMA_CLR_FLAG 0x0000 #define I2C_DMA_HARD_RST 0x0002 +#define I2C_DMA_4G_MODE 0x0001 #define I2C_DEFAULT_SPEED 100000 /* hz */ #define MAX_FS_MODE_SPEED 400000 @@ -88,6 +89,8 @@ enum DMA_REGS_OFFSET { OFFSET_RX_MEM_ADDR = 0x20, OFFSET_TX_LEN = 0x24, OFFSET_RX_LEN = 0x28, + OFFSET_TX_4G_MODE = 0x54, + OFFSET_RX_4G_MODE = 0x58, }; enum i2c_trans_st_rs { @@ -133,6 +136,7 @@ struct mtk_i2c_compatible { unsigned char dcm: 1; unsigned char auto_restart: 1; unsigned char aux_len_reg: 1; + unsigned char support_33bits: 1; }; struct mtk_i2c { @@ -182,6 +186,7 @@ static const struct mtk_i2c_compatible mt6577_compat = { .dcm = 1, .auto_restart = 0, .aux_len_reg = 0, + .support_33bits = 0, }; static const struct mtk_i2c_compatible mt6589_compat = { @@ -190,6 +195,7 @@ static const struct mtk_i2c_compatible mt6589_compat = { .dcm = 0, .auto_restart = 0, .aux_len_reg = 0, + .support_33bits = 0, }; static const struct mtk_i2c_compatible mt8173_compat = { @@ -198,6 +204,7 @@ static const struct mtk_i2c_compatible mt8173_compat = { .dcm = 1, .auto_restart = 1, .aux_len_reg = 1, + .support_33bits = 1, }; static const struct of_device_id mtk_i2c_of_match[] = { @@ -366,6 +373,11 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk, return 0; } +static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr) +{ + return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG; +} + static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, int num, int left_num) { @@ -373,6 +385,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, u16 start_reg; u16 control_reg; u16 restart_flag = 0; + u32 reg_4g_mode; dma_addr_t rpaddr = 0; dma_addr_t wpaddr = 0; int ret; @@ -439,6 +452,12 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, msgs->len, DMA_FROM_DEVICE); if (dma_mapping_error(i2c->dev, rpaddr)) return -ENOMEM; + + if (i2c->dev_comp->support_33bits) { + reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr); + writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE); + } + writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR); writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN); } else if (i2c->op == I2C_MASTER_WR) { @@ -448,6 +467,12 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, msgs->len, DMA_TO_DEVICE); if (dma_mapping_error(i2c->dev, wpaddr)) return -ENOMEM; + + if (i2c->dev_comp->support_33bits) { + reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr); + writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE); + } + writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR); writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN); } else { @@ -465,6 +490,15 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, msgs->len, DMA_TO_DEVICE); return -ENOMEM; } + + if (i2c->dev_comp->support_33bits) { + reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr); + writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE); + + reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr); + writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE); + } + writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR); writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR); writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN); @@ -729,6 +763,14 @@ static int mtk_i2c_probe(struct platform_device *pdev) return -EINVAL; } + if (i2c->dev_comp->support_33bits) { + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33)); + if (ret) { + dev_err(&pdev->dev, "dma_set_mask return error.\n"); + return ret; + } + } + ret = mtk_i2c_clock_enable(i2c); if (ret) { dev_err(&pdev->dev, "clock enable failed!\n"); diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index 32914ab42a19..46fb6c42934f 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -2,7 +2,7 @@ * (C) Copyright 2009-2010 * Nokia Siemens Networks, michael.lawnick.ext@nsn.com * - * Portions Copyright (C) 2010, 2011 Cavium Networks, Inc. + * Portions Copyright (C) 2010 - 2016 Cavium, Inc. * * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors. * @@ -26,39 +26,48 @@ #define DRV_NAME "i2c-octeon" -/* The previous out-of-tree version was implicitly version 1.0. */ -#define DRV_VERSION "2.0" - -/* register offsets */ -#define SW_TWSI 0x00 -#define TWSI_INT 0x10 +/* Register offsets */ +#define SW_TWSI 0x00 +#define TWSI_INT 0x10 /* Controller command patterns */ -#define SW_TWSI_V 0x8000000000000000ull -#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull -#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull -#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull -#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull -#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull -#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull -#define SW_TWSI_R 0x0100000000000000ull +#define SW_TWSI_V BIT_ULL(63) /* Valid bit */ +#define SW_TWSI_R BIT_ULL(56) /* Result or read bit */ + +/* Controller opcode word (bits 60:57) */ +#define SW_TWSI_OP_SHIFT 57 +#define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT) +#define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */ + +/* Controller extended opcode word (bits 34:32) */ +#define SW_TWSI_EOP_SHIFT 32 +#define SW_TWSI_EOP_TWSI_DATA (SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT) +#define SW_TWSI_EOP_TWSI_CTL (SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT) +#define SW_TWSI_EOP_TWSI_CLKCTL (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT) +#define SW_TWSI_EOP_TWSI_STAT (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT) +#define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT) /* Controller command and status bits */ -#define TWSI_CTL_CE 0x80 -#define TWSI_CTL_ENAB 0x40 -#define TWSI_CTL_STA 0x20 -#define TWSI_CTL_STP 0x10 -#define TWSI_CTL_IFLG 0x08 -#define TWSI_CTL_AAK 0x04 +#define TWSI_CTL_CE 0x80 +#define TWSI_CTL_ENAB 0x40 /* Bus enable */ +#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */ +#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */ +#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */ +#define TWSI_CTL_AAK 0x04 /* Assert ACK */ /* Some status values */ -#define STAT_START 0x08 -#define STAT_RSTART 0x10 -#define STAT_TXADDR_ACK 0x18 -#define STAT_TXDATA_ACK 0x28 -#define STAT_RXADDR_ACK 0x40 -#define STAT_RXDATA_ACK 0x50 -#define STAT_IDLE 0xF8 +#define STAT_START 0x08 +#define STAT_RSTART 0x10 +#define STAT_TXADDR_ACK 0x18 +#define STAT_TXDATA_ACK 0x28 +#define STAT_RXADDR_ACK 0x40 +#define STAT_RXDATA_ACK 0x50 +#define STAT_IDLE 0xF8 + +/* TWSI_INT values */ +#define TWSI_INT_CORE_EN BIT_ULL(6) +#define TWSI_INT_SDA_OVR BIT_ULL(8) +#define TWSI_INT_SCL_OVR BIT_ULL(9) struct octeon_i2c { wait_queue_head_t queue; @@ -66,23 +75,19 @@ struct octeon_i2c { int irq; u32 twsi_freq; int sys_freq; - resource_size_t twsi_phys; void __iomem *twsi_base; - resource_size_t regsize; struct device *dev; }; /** - * octeon_i2c_write_sw - write an I2C core register. - * @i2c: The struct octeon_i2c. - * @eop_reg: Register selector. - * @data: Value to be written. + * octeon_i2c_write_sw - write an I2C core register + * @i2c: The struct octeon_i2c + * @eop_reg: Register selector + * @data: Value to be written * * The I2C core registers are accessed indirectly via the SW_TWSI CSR. */ -static void octeon_i2c_write_sw(struct octeon_i2c *i2c, - u64 eop_reg, - u8 data) +static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data) { u64 tmp; @@ -93,9 +98,9 @@ static void octeon_i2c_write_sw(struct octeon_i2c *i2c, } /** - * octeon_i2c_read_sw - write an I2C core register. - * @i2c: The struct octeon_i2c. - * @eop_reg: Register selector. + * octeon_i2c_read_sw - read lower bits of an I2C core register + * @i2c: The struct octeon_i2c + * @eop_reg: Register selector * * Returns the data. * @@ -115,8 +120,8 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) /** * octeon_i2c_write_int - write the TWSI_INT register - * @i2c: The struct octeon_i2c. - * @data: Value to be written. + * @i2c: The struct octeon_i2c + * @data: Value to be written */ static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) { @@ -125,57 +130,52 @@ static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) } /** - * octeon_i2c_int_enable - enable the TS interrupt. - * @i2c: The struct octeon_i2c. + * octeon_i2c_int_enable - enable the CORE interrupt + * @i2c: The struct octeon_i2c * * The interrupt will be asserted when there is non-STAT_IDLE state in * the SW_TWSI_EOP_TWSI_STAT register. */ static void octeon_i2c_int_enable(struct octeon_i2c *i2c) { - octeon_i2c_write_int(i2c, 0x40); + octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN); } -/** - * octeon_i2c_int_disable - disable the TS interrupt. - * @i2c: The struct octeon_i2c. - */ +/* disable the CORE interrupt */ static void octeon_i2c_int_disable(struct octeon_i2c *i2c) { + /* clear TS/ST/IFLG events */ octeon_i2c_write_int(i2c, 0); } /** - * octeon_i2c_unblock - unblock the bus. - * @i2c: The struct octeon_i2c. + * octeon_i2c_unblock - unblock the bus + * @i2c: The struct octeon_i2c * - * If there was a reset while a device was driving 0 to bus, - * bus is blocked. We toggle it free manually by some clock - * cycles and send a stop. + * If there was a reset while a device was driving 0 to bus, bus is blocked. + * We toggle it free manually by some clock cycles and send a stop. */ static void octeon_i2c_unblock(struct octeon_i2c *i2c) { int i; dev_dbg(i2c->dev, "%s\n", __func__); + for (i = 0; i < 9; i++) { - octeon_i2c_write_int(i2c, 0x0); + octeon_i2c_write_int(i2c, 0); udelay(5); - octeon_i2c_write_int(i2c, 0x200); + octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR); udelay(5); } - octeon_i2c_write_int(i2c, 0x300); + /* hand-crank a STOP */ + octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR); udelay(5); - octeon_i2c_write_int(i2c, 0x100); + octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR); udelay(5); - octeon_i2c_write_int(i2c, 0x0); + octeon_i2c_write_int(i2c, 0); } -/** - * octeon_i2c_isr - the interrupt service routine. - * @int: The irq, unused. - * @dev_id: Our struct octeon_i2c. - */ +/* interrupt service routine */ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id) { struct octeon_i2c *i2c = dev_id; @@ -193,24 +193,20 @@ static int octeon_i2c_test_iflg(struct octeon_i2c *i2c) } /** - * octeon_i2c_wait - wait for the IFLG to be set. - * @i2c: The struct octeon_i2c. + * octeon_i2c_wait - wait for the IFLG to be set + * @i2c: The struct octeon_i2c * * Returns 0 on success, otherwise a negative errno. */ static int octeon_i2c_wait(struct octeon_i2c *i2c) { - long result; + long time_left; octeon_i2c_int_enable(i2c); - - result = wait_event_timeout(i2c->queue, - octeon_i2c_test_iflg(i2c), - i2c->adap.timeout); - + time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c), + i2c->adap.timeout); octeon_i2c_int_disable(i2c); - - if (result == 0) { + if (!time_left) { dev_dbg(i2c->dev, "%s: timeout\n", __func__); return -ETIMEDOUT; } @@ -219,18 +215,18 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c) } /** - * octeon_i2c_start - send START to the bus. - * @i2c: The struct octeon_i2c. + * octeon_i2c_start - send START to the bus + * @i2c: The struct octeon_i2c * * Returns 0 on success, otherwise a negative errno. */ static int octeon_i2c_start(struct octeon_i2c *i2c) { - u8 data; int result; + u8 data; octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB | TWSI_CTL_STA); + TWSI_CTL_ENAB | TWSI_CTL_STA); result = octeon_i2c_wait(i2c); if (result) { @@ -243,7 +239,6 @@ static int octeon_i2c_start(struct octeon_i2c *i2c) octeon_i2c_unblock(i2c); octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB | TWSI_CTL_STA); - result = octeon_i2c_wait(i2c); } if (result) @@ -259,34 +254,19 @@ static int octeon_i2c_start(struct octeon_i2c *i2c) return 0; } -/** - * octeon_i2c_stop - send STOP to the bus. - * @i2c: The struct octeon_i2c. - * - * Returns 0 on success, otherwise a negative errno. - */ -static int octeon_i2c_stop(struct octeon_i2c *i2c) +/* send STOP to the bus */ +static void octeon_i2c_stop(struct octeon_i2c *i2c) { - u8 data; - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB | TWSI_CTL_STP); - - data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); - - if (data != STAT_IDLE) { - dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data); - return -EIO; - } - return 0; } /** - * octeon_i2c_write - send data to the bus. - * @i2c: The struct octeon_i2c. - * @target: Target address. - * @data: Pointer to the data to be sent. - * @length: Length of the data. + * octeon_i2c_write - send data to the bus via low-level controller + * @i2c: The struct octeon_i2c + * @target: Target address + * @data: Pointer to the data to be sent + * @length: Length of the data * * The address is sent over the bus, then the data. * @@ -311,6 +291,7 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target, for (i = 0; i < length; i++) { tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) { dev_err(i2c->dev, "%s: bad status before write (0x%x)\n", @@ -330,20 +311,21 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target, } /** - * octeon_i2c_read - receive data from the bus. - * @i2c: The struct octeon_i2c. - * @target: Target address. - * @data: Pointer to the location to store the datae . - * @length: Length of the data. + * octeon_i2c_read - receive data from the bus via low-level controller + * @i2c: The struct octeon_i2c + * @target: Target address + * @data: Pointer to the location to store the data + * @rlength: Length of the data + * @recv_len: flag for length byte * * The address is sent over the bus, then the data is read. * * Returns 0 on success, otherwise a negative errno. */ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, - u8 *data, int length) + u8 *data, u16 *rlength, bool recv_len) { - int i, result; + int i, result, length = *rlength; u8 tmp; if (length < 1) @@ -353,7 +335,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, if (result) return result; - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1); + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target << 1) | 1); octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); result = octeon_i2c_wait(i2c); @@ -362,6 +344,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, for (i = 0; i < length; i++) { tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) { dev_err(i2c->dev, "%s: bad status before read (0x%x)\n", @@ -369,52 +352,59 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, return -EIO; } - if (i+1 < length) + if (i + 1 < length) octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB | TWSI_CTL_AAK); + TWSI_CTL_ENAB | TWSI_CTL_AAK); else octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, - TWSI_CTL_ENAB); + TWSI_CTL_ENAB); result = octeon_i2c_wait(i2c); if (result) return result; data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA); + if (recv_len && i == 0) { + if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) { + dev_err(i2c->dev, + "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n", + __func__, data[i]); + return -EPROTO; + } + length += data[i]; + } } + *rlength = length; return 0; } /** - * octeon_i2c_xfer - The driver's master_xfer function. - * @adap: Pointer to the i2c_adapter structure. - * @msgs: Pointer to the messages to be processed. - * @num: Length of the MSGS array. + * octeon_i2c_xfer - The driver's master_xfer function + * @adap: Pointer to the i2c_adapter structure + * @msgs: Pointer to the messages to be processed + * @num: Length of the MSGS array * - * Returns the number of messages processed, or a negative errno on - * failure. + * Returns the number of messages processed, or a negative errno on failure. */ -static int octeon_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, +static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { - struct i2c_msg *pmsg; - int i; - int ret = 0; struct octeon_i2c *i2c = i2c_get_adapdata(adap); + int i, ret = 0; for (i = 0; ret == 0 && i < num; i++) { - pmsg = &msgs[i]; + struct i2c_msg *pmsg = &msgs[i]; + dev_dbg(i2c->dev, "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n", pmsg->flags & I2C_M_RD ? "read" : "write", pmsg->len, pmsg->addr, i + 1, num); if (pmsg->flags & I2C_M_RD) ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf, - pmsg->len); + &pmsg->len, pmsg->flags & I2C_M_RECV_LEN); else ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf, - pmsg->len); + pmsg->len); } octeon_i2c_stop(i2c); @@ -423,7 +413,8 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, static u32 octeon_i2c_functionality(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL; } static const struct i2c_algorithm octeon_i2c_algo = { @@ -438,10 +429,8 @@ static struct i2c_adapter octeon_i2c_ops = { .timeout = HZ / 50, }; -/** - * octeon_i2c_setclock - Calculate and set clock divisors. - */ -static int octeon_i2c_setclock(struct octeon_i2c *i2c) +/* calculate and set clock divisors */ +static void octeon_i2c_set_clock(struct octeon_i2c *i2c) { int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; @@ -449,8 +438,7 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c) for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { /* * An mdiv value of less than 2 seems to not work well - * with ds1337 RTCs, so we constrain it to larger - * values. + * with ds1337 RTCs, so we constrain it to larger values. */ for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) { /* @@ -460,6 +448,7 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c) tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; tclk *= (1 << ndiv_idx); thp_base = (i2c->sys_freq / (tclk * 2)) - 1; + for (inc = 0; inc <= 1; inc++) { thp_idx = thp_base + inc; if (thp_idx < 5 || thp_idx > 0xff) @@ -480,11 +469,9 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c) } octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp); octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv); - - return 0; } -static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c) +static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c) { u8 status; int tries; @@ -507,9 +494,10 @@ static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c) static int octeon_i2c_probe(struct platform_device *pdev) { - int irq, result = 0; - struct octeon_i2c *i2c; + struct device_node *node = pdev->dev.of_node; struct resource *res_mem; + struct octeon_i2c *i2c; + int irq, result = 0; /* All adaptors have an irq. */ irq = platform_get_irq(pdev, 0); @@ -518,31 +506,25 @@ static int octeon_i2c_probe(struct platform_device *pdev) i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) { - dev_err(&pdev->dev, "kzalloc failed\n"); result = -ENOMEM; goto out; } i2c->dev = &pdev->dev; res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (res_mem == NULL) { - dev_err(i2c->dev, "found no memory resource\n"); - result = -ENXIO; + i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem); + if (IS_ERR(i2c->twsi_base)) { + result = PTR_ERR(i2c->twsi_base); goto out; } - i2c->twsi_phys = res_mem->start; - i2c->regsize = resource_size(res_mem); /* * "clock-rate" is a legacy binding, the official binding is * "clock-frequency". Try the official one first and then * fall back if it doesn't exist. */ - if (of_property_read_u32(pdev->dev.of_node, - "clock-frequency", &i2c->twsi_freq) && - of_property_read_u32(pdev->dev.of_node, - "clock-rate", &i2c->twsi_freq)) { + if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) && + of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) { dev_err(i2c->dev, "no I2C 'clock-rate' or 'clock-frequency' property\n"); result = -ENXIO; @@ -551,13 +533,6 @@ static int octeon_i2c_probe(struct platform_device *pdev) i2c->sys_freq = octeon_get_io_clock_rate(); - if (!devm_request_mem_region(&pdev->dev, i2c->twsi_phys, i2c->regsize, - res_mem->name)) { - dev_err(i2c->dev, "request_mem_region failed\n"); - goto out; - } - i2c->twsi_base = devm_ioremap(&pdev->dev, i2c->twsi_phys, i2c->regsize); - init_waitqueue_head(&i2c->queue); i2c->irq = irq; @@ -569,21 +544,17 @@ static int octeon_i2c_probe(struct platform_device *pdev) goto out; } - result = octeon_i2c_initlowlevel(i2c); + result = octeon_i2c_init_lowlevel(i2c); if (result) { dev_err(i2c->dev, "init low level failed\n"); goto out; } - result = octeon_i2c_setclock(i2c); - if (result) { - dev_err(i2c->dev, "clock init failed\n"); - goto out; - } + octeon_i2c_set_clock(i2c); i2c->adap = octeon_i2c_ops; i2c->adap.dev.parent = &pdev->dev; - i2c->adap.dev.of_node = pdev->dev.of_node; + i2c->adap.dev.of_node = node; i2c_set_adapdata(&i2c->adap, i2c); platform_set_drvdata(pdev, i2c); @@ -592,8 +563,7 @@ static int octeon_i2c_probe(struct platform_device *pdev) dev_err(i2c->dev, "failed to add adapter\n"); goto out; } - dev_info(i2c->dev, "version %s\n", DRV_VERSION); - + dev_info(i2c->dev, "probed\n"); return 0; out: @@ -608,10 +578,8 @@ static int octeon_i2c_remove(struct platform_device *pdev) return 0; }; -static struct of_device_id octeon_i2c_match[] = { - { - .compatible = "cavium,octeon-3860-twsi", - }, +static const struct of_device_id octeon_i2c_match[] = { + { .compatible = "cavium,octeon-3860-twsi", }, {}, }; MODULE_DEVICE_TABLE(of, octeon_i2c_match); @@ -630,4 +598,3 @@ module_platform_driver(octeon_i2c_driver); MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>"); MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors"); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 93f2895383ee..23d1c167b5d7 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -85,8 +85,14 @@ /* SB800 constants */ #define SB800_PIIX4_SMB_IDX 0xcd6 -/* SB800 port is selected by bits 2:1 of the smb_en register (0x2c) */ +/* + * SB800 port is selected by bits 2:1 of the smb_en register (0x2c) + * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f. + * Hudson-2/Bolton port is always selected by bits 2:1 of register 0x2f. + */ #define SB800_PIIX4_PORT_IDX 0x2c +#define SB800_PIIX4_PORT_IDX_ALT 0x2e +#define SB800_PIIX4_PORT_IDX_SEL 0x2f #define SB800_PIIX4_PORT_IDX_MASK 0x06 /* insmod parameters */ @@ -136,8 +142,13 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { { }, }; -/* SB800 globals */ +/* + * SB800 globals + * piix4_mutex_sb800 protects piix4_port_sel_sb800 and the pair + * of I/O ports at SB800_PIIX4_SMB_IDX. + */ static DEFINE_MUTEX(piix4_mutex_sb800); +static u8 piix4_port_sel_sb800; static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { " port 0", " port 2", " port 3", " port 4" }; @@ -148,7 +159,7 @@ struct i2c_piix4_adapdata { /* SB800 */ bool sb800_main; - unsigned short port; + u8 port; /* Port number, shifted */ }; static int piix4_setup(struct pci_dev *PIIX4_dev, @@ -254,7 +265,7 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, const struct pci_device_id *id, u8 aux) { unsigned short piix4_smba; - u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; + u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel; u8 i2ccfg, i2ccfg_offset = 0x10; /* SB800 and later SMBus does not support forcing address */ @@ -334,6 +345,23 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, i2ccfg >> 4); + /* Find which register is used for port selection */ + if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) { + piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; + } else { + mutex_lock(&piix4_mutex_sb800); + outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX); + port_sel = inb_p(SB800_PIIX4_SMB_IDX + 1); + piix4_port_sel_sb800 = (port_sel & 0x01) ? + SB800_PIIX4_PORT_IDX_ALT : + SB800_PIIX4_PORT_IDX; + mutex_unlock(&piix4_mutex_sb800); + } + + dev_info(&PIIX4_dev->dev, + "Using register 0x%02x for SMBus port selection\n", + (unsigned int)piix4_port_sel_sb800); + return piix4_smba; } @@ -563,12 +591,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, mutex_lock(&piix4_mutex_sb800); - outb_p(SB800_PIIX4_PORT_IDX, SB800_PIIX4_SMB_IDX); + outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); port = adapdata->port; - if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != (port << 1)) - outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | (port << 1), + if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port) + outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port, SB800_PIIX4_SMB_IDX + 1); retval = piix4_access(adap, addr, flags, read_write, @@ -627,7 +655,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS]; static struct i2c_adapter *piix4_aux_adapter; static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, - bool sb800_main, unsigned short port, + bool sb800_main, u8 port, const char *name, struct i2c_adapter **padap) { struct i2c_adapter *adap; @@ -654,7 +682,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, adapdata->smba = smba; adapdata->sb800_main = sb800_main; - adapdata->port = port; + adapdata->port = port << 1; /* set up the sysfs linkage to our parent device */ adap->dev.parent = &dev->dev; @@ -790,7 +818,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap) if (adapdata->smba) { i2c_del_adapter(adap); - if (adapdata->port == 0) { + if (adapdata->port == (0 << 1)) { release_region(adapdata->smba, SMBIOSIZE); if (adapdata->sb800_main) release_region(SB800_PIIX4_SMB_IDX, 2); diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index fdcbdab808e9..23eaabb19f96 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -14,8 +14,12 @@ * */ +#include <linux/atomic.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -24,6 +28,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/scatterlist.h> /* QUP Registers */ #define QUP_CONFIG 0x000 @@ -33,6 +38,7 @@ #define QUP_OPERATIONAL 0x018 #define QUP_ERROR_FLAGS 0x01c #define QUP_ERROR_FLAGS_EN 0x020 +#define QUP_OPERATIONAL_MASK 0x028 #define QUP_HW_VERSION 0x030 #define QUP_MX_OUTPUT_CNT 0x100 #define QUP_OUT_FIFO_BASE 0x110 @@ -42,6 +48,7 @@ #define QUP_IN_FIFO_BASE 0x218 #define QUP_I2C_CLK_CTL 0x400 #define QUP_I2C_STATUS 0x404 +#define QUP_I2C_MASTER_GEN 0x408 /* QUP States and reset values */ #define QUP_RESET_STATE 0 @@ -51,6 +58,7 @@ #define QUP_STATE_VALID BIT(2) #define QUP_I2C_MAST_GEN BIT(4) +#define QUP_I2C_FLUSH BIT(6) #define QUP_OPERATIONAL_RESET 0x000ff0 #define QUP_I2C_STATUS_RESET 0xfffffc @@ -69,16 +77,22 @@ #define QUP_CLOCK_AUTO_GATE BIT(13) #define I2C_MINI_CORE (2 << 8) #define I2C_N_VAL 15 +#define I2C_N_VAL_V2 7 + /* Most significant word offset in FIFO port */ #define QUP_MSW_SHIFT (I2C_N_VAL + 1) /* Packing/Unpacking words in FIFOs, and IO modes */ #define QUP_OUTPUT_BLK_MODE (1 << 10) +#define QUP_OUTPUT_BAM_MODE (3 << 10) #define QUP_INPUT_BLK_MODE (1 << 12) +#define QUP_INPUT_BAM_MODE (3 << 12) +#define QUP_BAM_MODE (QUP_OUTPUT_BAM_MODE | QUP_INPUT_BAM_MODE) #define QUP_UNPACK_EN BIT(14) #define QUP_PACK_EN BIT(15) #define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN) +#define QUP_V2_TAGS_EN 1 #define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03) #define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07) @@ -90,6 +104,15 @@ #define QUP_TAG_DATA (2 << 8) #define QUP_TAG_STOP (3 << 8) #define QUP_TAG_REC (4 << 8) +#define QUP_BAM_INPUT_EOT 0x93 +#define QUP_BAM_FLUSH_STOP 0x96 + +/* QUP v2 tags */ +#define QUP_TAG_V2_START 0x81 +#define QUP_TAG_V2_DATAWR 0x82 +#define QUP_TAG_V2_DATAWR_STOP 0x83 +#define QUP_TAG_V2_DATARD 0x85 +#define QUP_TAG_V2_DATARD_STOP 0x87 /* Status, Error flags */ #define I2C_STATUS_WR_BUFFER_FULL BIT(0) @@ -98,6 +121,36 @@ #define QUP_STATUS_ERROR_FLAGS 0x7c #define QUP_READ_LIMIT 256 +#define SET_BIT 0x1 +#define RESET_BIT 0x0 +#define ONE_BYTE 0x1 +#define QUP_I2C_MX_CONFIG_DURING_RUN BIT(31) + +#define MX_TX_RX_LEN SZ_64K +#define MX_BLOCKS (MX_TX_RX_LEN / QUP_READ_LIMIT) + +/* Max timeout in ms for 32k bytes */ +#define TOUT_MAX 300 + +struct qup_i2c_block { + int count; + int pos; + int tx_tag_len; + int rx_tag_len; + int data_len; + u8 tags[6]; +}; + +struct qup_i2c_tag { + u8 *start; + dma_addr_t addr; +}; + +struct qup_i2c_bam { + struct qup_i2c_tag tag; + struct dma_chan *dma; + struct scatterlist *sg; +}; struct qup_i2c_dev { struct device *dev; @@ -114,6 +167,7 @@ struct qup_i2c_dev { int in_blk_sz; unsigned long one_byte_t; + struct qup_i2c_block blk; struct i2c_msg *msg; /* Current posion in user message buffer */ @@ -123,6 +177,19 @@ struct qup_i2c_dev { /* QUP core errors */ u32 qup_err; + /* To check if this is the last msg */ + bool is_last; + + /* To configure when bus is in run state */ + int config_run; + + /* dma parameters */ + bool is_dma; + struct dma_pool *dpool; + struct qup_i2c_tag start_tag; + struct qup_i2c_bam brx; + struct qup_i2c_bam btx; + struct completion xfer; }; @@ -199,6 +266,14 @@ static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state) return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK); } +static void qup_i2c_flush(struct qup_i2c_dev *qup) +{ + u32 val = readl(qup->base + QUP_STATE); + + val |= QUP_I2C_FLUSH; + writel(val, qup->base + QUP_STATE); +} + static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup) { return qup_i2c_poll_state_mask(qup, 0, 0); @@ -221,26 +296,62 @@ static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state) return 0; } -static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup) +/** + * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path + * @qup: The qup_i2c_dev device + * @op: The bit/event to wait on + * @val: value of the bit to wait on, 0 or 1 + * @len: The length the bytes to be transferred + */ +static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val, + int len) { unsigned long timeout; u32 opflags; u32 status; + u32 shift = __ffs(op); - timeout = jiffies + HZ; + len *= qup->one_byte_t; + /* timeout after a wait of twice the max time */ + timeout = jiffies + len * 4; for (;;) { opflags = readl(qup->base + QUP_OPERATIONAL); status = readl(qup->base + QUP_I2C_STATUS); - if (!(opflags & QUP_OUT_NOT_EMPTY) && - !(status & I2C_STATUS_BUS_ACTIVE)) - return 0; + if (((opflags & op) >> shift) == val) { + if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) { + if (!(status & I2C_STATUS_BUS_ACTIVE)) + return 0; + } else { + return 0; + } + } if (time_after(jiffies, timeout)) return -ETIMEDOUT; - usleep_range(qup->one_byte_t, qup->one_byte_t * 2); + usleep_range(len, len * 2); + } +} + +static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup, + struct i2c_msg *msg) +{ + /* Number of entries to shift out, including the tags */ + int total = msg->len + qup->blk.tx_tag_len; + + total |= qup->config_run; + + if (total < qup->out_fifo_sz) { + /* FIFO mode */ + writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); + writel(total, qup->base + QUP_MX_WRITE_CNT); + } else { + /* BLOCK mode (transfer data on chunks) */ + writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN, + qup->base + QUP_IO_MODE); + writel(total, qup->base + QUP_MX_OUTPUT_CNT); } } @@ -261,13 +372,45 @@ static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg) } } -static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg) +static int check_for_fifo_space(struct qup_i2c_dev *qup) +{ + int ret; + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + goto out; + + ret = qup_i2c_wait_ready(qup, QUP_OUT_FULL, + RESET_BIT, 4 * ONE_BYTE); + if (ret) { + /* Fifo is full. Drain out the fifo */ + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto out; + + ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, + RESET_BIT, 256 * ONE_BYTE); + if (ret) { + dev_err(qup->dev, "timeout for fifo out full"); + goto out; + } + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + goto out; + } + +out: + return ret; +} + +static int qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg) { u32 addr = msg->addr << 1; u32 qup_tag; - u32 opflags; int idx; u32 val; + int ret = 0; if (qup->pos == 0) { val = QUP_TAG_START | addr; @@ -279,9 +422,9 @@ static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg) while (qup->pos < msg->len) { /* Check that there's space in the FIFO for our pair */ - opflags = readl(qup->base + QUP_OPERATIONAL); - if (opflags & QUP_OUT_FULL) - break; + ret = check_for_fifo_space(qup); + if (ret) + return ret; if (qup->pos == msg->len - 1) qup_tag = QUP_TAG_STOP; @@ -300,11 +443,501 @@ static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg) qup->pos++; idx++; } + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + + return ret; } -static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) +static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup, + struct i2c_msg *msg) +{ + memset(&qup->blk, 0, sizeof(qup->blk)); + + qup->blk.data_len = msg->len; + qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / QUP_READ_LIMIT; + + /* 4 bytes for first block and 2 writes for rest */ + qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2; + + /* There are 2 tag bytes that are read in to fifo for every block */ + if (msg->flags & I2C_M_RD) + qup->blk.rx_tag_len = qup->blk.count * 2; +} + +static int qup_i2c_send_data(struct qup_i2c_dev *qup, int tlen, u8 *tbuf, + int dlen, u8 *dbuf) +{ + u32 val = 0, idx = 0, pos = 0, i = 0, t; + int len = tlen + dlen; + u8 *buf = tbuf; + int ret = 0; + + while (len > 0) { + ret = check_for_fifo_space(qup); + if (ret) + return ret; + + t = (len >= 4) ? 4 : len; + + while (idx < t) { + if (!i && (pos >= tlen)) { + buf = dbuf; + pos = 0; + i = 1; + } + val |= buf[pos++] << (idx++ * 8); + } + + writel(val, qup->base + QUP_OUT_FIFO_BASE); + idx = 0; + val = 0; + len -= 4; + } + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + + return ret; +} + +static int qup_i2c_get_data_len(struct qup_i2c_dev *qup) +{ + int data_len; + + if (qup->blk.data_len > QUP_READ_LIMIT) + data_len = QUP_READ_LIMIT; + else + data_len = qup->blk.data_len; + + return data_len; +} + +static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup, + struct i2c_msg *msg, int is_dma) +{ + u16 addr = (msg->addr << 1) | ((msg->flags & I2C_M_RD) == I2C_M_RD); + int len = 0; + int data_len; + + int last = (qup->blk.pos == (qup->blk.count - 1)) && (qup->is_last); + + if (qup->blk.pos == 0) { + tags[len++] = QUP_TAG_V2_START; + tags[len++] = addr & 0xff; + + if (msg->flags & I2C_M_TEN) + tags[len++] = addr >> 8; + } + + /* Send _STOP commands for the last block */ + if (last) { + if (msg->flags & I2C_M_RD) + tags[len++] = QUP_TAG_V2_DATARD_STOP; + else + tags[len++] = QUP_TAG_V2_DATAWR_STOP; + } else { + if (msg->flags & I2C_M_RD) + tags[len++] = QUP_TAG_V2_DATARD; + else + tags[len++] = QUP_TAG_V2_DATAWR; + } + + data_len = qup_i2c_get_data_len(qup); + + /* 0 implies 256 bytes */ + if (data_len == QUP_READ_LIMIT) + tags[len++] = 0; + else + tags[len++] = data_len; + + if ((msg->flags & I2C_M_RD) && last && is_dma) { + tags[len++] = QUP_BAM_INPUT_EOT; + tags[len++] = QUP_BAM_FLUSH_STOP; + } + + return len; +} + +static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + int data_len = 0, tag_len, index; + int ret; + + tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0); + index = msg->len - qup->blk.data_len; + + /* only tags are written for read */ + if (!(msg->flags & I2C_M_RD)) + data_len = qup_i2c_get_data_len(qup); + + ret = qup_i2c_send_data(qup, tag_len, qup->blk.tags, + data_len, &msg->buf[index]); + qup->blk.data_len -= data_len; + + return ret; +} + +static void qup_i2c_bam_cb(void *data) +{ + struct qup_i2c_dev *qup = data; + + complete(&qup->xfer); +} + +static int qup_sg_set_buf(struct scatterlist *sg, void *buf, + struct qup_i2c_tag *tg, unsigned int buflen, + struct qup_i2c_dev *qup, int map, int dir) +{ + int ret; + + sg_set_buf(sg, buf, buflen); + ret = dma_map_sg(qup->dev, sg, 1, dir); + if (!ret) + return -EINVAL; + + if (!map) + sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start); + + return 0; +} + +static void qup_i2c_rel_dma(struct qup_i2c_dev *qup) +{ + if (qup->btx.dma) + dma_release_channel(qup->btx.dma); + if (qup->brx.dma) + dma_release_channel(qup->brx.dma); + qup->btx.dma = NULL; + qup->brx.dma = NULL; +} + +static int qup_i2c_req_dma(struct qup_i2c_dev *qup) +{ + int err; + + if (!qup->btx.dma) { + qup->btx.dma = dma_request_slave_channel_reason(qup->dev, "tx"); + if (IS_ERR(qup->btx.dma)) { + err = PTR_ERR(qup->btx.dma); + qup->btx.dma = NULL; + dev_err(qup->dev, "\n tx channel not available"); + return err; + } + } + + if (!qup->brx.dma) { + qup->brx.dma = dma_request_slave_channel_reason(qup->dev, "rx"); + if (IS_ERR(qup->brx.dma)) { + dev_err(qup->dev, "\n rx channel not available"); + err = PTR_ERR(qup->brx.dma); + qup->brx.dma = NULL; + qup_i2c_rel_dma(qup); + return err; + } + } + return 0; +} + +static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, + int num) +{ + struct dma_async_tx_descriptor *txd, *rxd = NULL; + int ret = 0, idx = 0, limit = QUP_READ_LIMIT; + dma_cookie_t cookie_rx, cookie_tx; + u32 rx_nents = 0, tx_nents = 0, len, blocks, rem; + u32 i, tlen, tx_len, tx_buf = 0, rx_buf = 0, off = 0; + u8 *tags; + + while (idx < num) { + blocks = (msg->len + limit) / limit; + rem = msg->len % limit; + tx_len = 0, len = 0, i = 0; + + qup->is_last = (idx == (num - 1)); + + qup_i2c_set_blk_data(qup, msg); + + if (msg->flags & I2C_M_RD) { + rx_nents += (blocks * 2) + 1; + tx_nents += 1; + + while (qup->blk.pos < blocks) { + /* length set to '0' implies 256 bytes */ + tlen = (i == (blocks - 1)) ? rem : 0; + tags = &qup->start_tag.start[off + len]; + len += qup_i2c_set_tags(tags, qup, msg, 1); + + /* scratch buf to read the start and len tags */ + ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], + &qup->brx.tag.start[0], + &qup->brx.tag, + 2, qup, 0, 0); + + if (ret) + return ret; + + ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], + &msg->buf[limit * i], + NULL, tlen, qup, + 1, DMA_FROM_DEVICE); + if (ret) + return ret; + + i++; + qup->blk.pos = i; + } + ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], + &qup->start_tag.start[off], + &qup->start_tag, len, qup, 0, 0); + if (ret) + return ret; + + off += len; + /* scratch buf to read the BAM EOT and FLUSH tags */ + ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], + &qup->brx.tag.start[0], + &qup->brx.tag, 2, + qup, 0, 0); + if (ret) + return ret; + } else { + tx_nents += (blocks * 2); + + while (qup->blk.pos < blocks) { + tlen = (i == (blocks - 1)) ? rem : 0; + tags = &qup->start_tag.start[off + tx_len]; + len = qup_i2c_set_tags(tags, qup, msg, 1); + + ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], + tags, + &qup->start_tag, len, + qup, 0, 0); + if (ret) + return ret; + + tx_len += len; + ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], + &msg->buf[limit * i], + NULL, tlen, qup, 1, + DMA_TO_DEVICE); + if (ret) + return ret; + i++; + qup->blk.pos = i; + } + off += tx_len; + + if (idx == (num - 1)) { + len = 1; + if (rx_nents) { + qup->btx.tag.start[0] = + QUP_BAM_INPUT_EOT; + len++; + } + qup->btx.tag.start[len - 1] = + QUP_BAM_FLUSH_STOP; + ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], + &qup->btx.tag.start[0], + &qup->btx.tag, len, + qup, 0, 0); + if (ret) + return ret; + tx_nents += 1; + } + } + idx++; + msg++; + } + + txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_nents, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_PREP_FENCE); + if (!txd) { + dev_err(qup->dev, "failed to get tx desc\n"); + ret = -EINVAL; + goto desc_err; + } + + if (!rx_nents) { + txd->callback = qup_i2c_bam_cb; + txd->callback_param = qup; + } + + cookie_tx = dmaengine_submit(txd); + if (dma_submit_error(cookie_tx)) { + ret = -EINVAL; + goto desc_err; + } + + dma_async_issue_pending(qup->btx.dma); + + if (rx_nents) { + rxd = dmaengine_prep_slave_sg(qup->brx.dma, qup->brx.sg, + rx_nents, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!rxd) { + dev_err(qup->dev, "failed to get rx desc\n"); + ret = -EINVAL; + + /* abort TX descriptors */ + dmaengine_terminate_all(qup->btx.dma); + goto desc_err; + } + + rxd->callback = qup_i2c_bam_cb; + rxd->callback_param = qup; + cookie_rx = dmaengine_submit(rxd); + if (dma_submit_error(cookie_rx)) { + ret = -EINVAL; + goto desc_err; + } + + dma_async_issue_pending(qup->brx.dma); + } + + if (!wait_for_completion_timeout(&qup->xfer, TOUT_MAX * HZ)) { + dev_err(qup->dev, "normal trans timed out\n"); + ret = -ETIMEDOUT; + } + + if (ret || qup->bus_err || qup->qup_err) { + if (qup->bus_err & QUP_I2C_NACK_FLAG) { + msg--; + dev_err(qup->dev, "NACK from %x\n", msg->addr); + ret = -EIO; + + if (qup_i2c_change_state(qup, QUP_RUN_STATE)) { + dev_err(qup->dev, "change to run state timed out"); + return ret; + } + + if (rx_nents) + writel(QUP_BAM_INPUT_EOT, + qup->base + QUP_OUT_FIFO_BASE); + + writel(QUP_BAM_FLUSH_STOP, + qup->base + QUP_OUT_FIFO_BASE); + + qup_i2c_flush(qup); + + /* wait for remaining interrupts to occur */ + if (!wait_for_completion_timeout(&qup->xfer, HZ)) + dev_err(qup->dev, "flush timed out\n"); + + qup_i2c_rel_dma(qup); + } + } + + dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE); + + if (rx_nents) + dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents, + DMA_FROM_DEVICE); +desc_err: + return ret; +} + +static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct qup_i2c_dev *qup = i2c_get_adapdata(adap); + int ret = 0; + + enable_irq(qup->irq); + ret = qup_i2c_req_dma(qup); + + if (ret) + goto out; + + qup->bus_err = 0; + qup->qup_err = 0; + + writel(0, qup->base + QUP_MX_INPUT_CNT); + writel(0, qup->base + QUP_MX_OUTPUT_CNT); + + /* set BAM mode */ + writel(QUP_REPACK_EN | QUP_BAM_MODE, qup->base + QUP_IO_MODE); + + /* mask fifo irqs */ + writel((0x3 << 8), qup->base + QUP_OPERATIONAL_MASK); + + /* set RUN STATE */ + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto out; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + qup->msg = msg; + ret = qup_i2c_bam_do_xfer(qup, qup->msg, num); +out: + disable_irq(qup->irq); + + qup->msg = NULL; + return ret; +} + +static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup, + struct i2c_msg *msg) { unsigned long left; + int ret = 0; + + left = wait_for_completion_timeout(&qup->xfer, HZ); + if (!left) { + writel(1, qup->base + QUP_SW_RESET); + ret = -ETIMEDOUT; + } + + if (qup->bus_err || qup->qup_err) { + if (qup->bus_err & QUP_I2C_NACK_FLAG) { + dev_err(qup->dev, "NACK from %x\n", msg->addr); + ret = -EIO; + } + } + + return ret; +} + +static int qup_i2c_write_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + int ret = 0; + + qup->msg = msg; + qup->pos = 0; + enable_irq(qup->irq); + qup_i2c_set_blk_data(qup, msg); + qup_i2c_set_write_mode_v2(qup, msg); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + do { + ret = qup_i2c_issue_xfer_v2(qup, msg); + if (ret) + goto err; + + ret = qup_i2c_wait_for_complete(qup, msg); + if (ret) + goto err; + + qup->blk.pos++; + } while (qup->blk.pos < qup->blk.count); + + ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE); + +err: + disable_irq(qup->irq); + qup->msg = NULL; + + return ret; +} + +static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ int ret; qup->msg = msg; @@ -325,30 +958,21 @@ static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) if (ret) goto err; - qup_i2c_issue_write(qup, msg); - - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + ret = qup_i2c_issue_write(qup, msg); if (ret) goto err; - left = wait_for_completion_timeout(&qup->xfer, HZ); - if (!left) { - writel(1, qup->base + QUP_SW_RESET); - ret = -ETIMEDOUT; + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) goto err; - } - if (qup->bus_err || qup->qup_err) { - if (qup->bus_err & QUP_I2C_NACK_FLAG) - dev_err(qup->dev, "NACK from %x\n", msg->addr); - ret = -EIO; + ret = qup_i2c_wait_for_complete(qup, msg); + if (ret) goto err; - } } while (qup->pos < msg->len); /* Wait for the outstanding data in the fifo to drain */ - ret = qup_i2c_wait_writeready(qup); - + ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE); err: disable_irq(qup->irq); qup->msg = NULL; @@ -370,6 +994,28 @@ static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len) } } +static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len) +{ + int tx_len = qup->blk.tx_tag_len; + + len += qup->blk.rx_tag_len; + len |= qup->config_run; + tx_len |= qup->config_run; + + if (len < qup->in_fifo_sz) { + /* FIFO mode */ + writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); + writel(tx_len, qup->base + QUP_MX_WRITE_CNT); + writel(len, qup->base + QUP_MX_READ_CNT); + } else { + /* BLOCK mode (transfer data on chunks) */ + writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN, + qup->base + QUP_IO_MODE); + writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT); + writel(len, qup->base + QUP_MX_INPUT_CNT); + } +} + static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg) { u32 addr, len, val; @@ -384,18 +1030,19 @@ static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg) } -static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg) +static int qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg) { - u32 opflags; u32 val = 0; int idx; + int ret = 0; for (idx = 0; qup->pos < msg->len; idx++) { if ((idx & 1) == 0) { /* Check that FIFO have data */ - opflags = readl(qup->base + QUP_OPERATIONAL); - if (!(opflags & QUP_IN_NOT_EMPTY)) - break; + ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY, + SET_BIT, 4 * ONE_BYTE); + if (ret) + return ret; /* Reading 2 words at time */ val = readl(qup->base + QUP_IN_FIFO_BASE); @@ -405,18 +1052,94 @@ static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg) msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT; } } + + return ret; +} + +static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup, + struct i2c_msg *msg) +{ + u32 val; + int idx, pos = 0, ret = 0, total; + + total = qup_i2c_get_data_len(qup); + + /* 2 extra bytes for read tags */ + while (pos < (total + 2)) { + /* Check that FIFO have data */ + ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY, + SET_BIT, 4 * ONE_BYTE); + if (ret) { + dev_err(qup->dev, "timeout for fifo not empty"); + return ret; + } + val = readl(qup->base + QUP_IN_FIFO_BASE); + + for (idx = 0; idx < 4; idx++, val >>= 8, pos++) { + /* first 2 bytes are tag bytes */ + if (pos < 2) + continue; + + if (pos >= (total + 2)) + goto out; + + msg->buf[qup->pos++] = val & 0xff; + } + } + +out: + qup->blk.data_len -= total; + + return ret; +} + +static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + int ret = 0; + + qup->msg = msg; + qup->pos = 0; + enable_irq(qup->irq); + qup_i2c_set_blk_data(qup, msg); + qup_i2c_set_read_mode_v2(qup, msg->len); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + do { + ret = qup_i2c_issue_xfer_v2(qup, msg); + if (ret) + goto err; + + ret = qup_i2c_wait_for_complete(qup, msg); + if (ret) + goto err; + + ret = qup_i2c_read_fifo_v2(qup, msg); + if (ret) + goto err; + + qup->blk.pos++; + } while (qup->blk.pos < qup->blk.count); + +err: + disable_irq(qup->irq); + qup->msg = NULL; + + return ret; } static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) { - unsigned long left; int ret; qup->msg = msg; qup->pos = 0; enable_irq(qup->irq); - qup_i2c_set_read_mode(qup, msg->len); ret = qup_i2c_change_state(qup, QUP_RUN_STATE); @@ -436,21 +1159,13 @@ static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) goto err; do { - left = wait_for_completion_timeout(&qup->xfer, HZ); - if (!left) { - writel(1, qup->base + QUP_SW_RESET); - ret = -ETIMEDOUT; + ret = qup_i2c_wait_for_complete(qup, msg); + if (ret) goto err; - } - if (qup->bus_err || qup->qup_err) { - if (qup->bus_err & QUP_I2C_NACK_FLAG) - dev_err(qup->dev, "NACK from %x\n", msg->addr); - ret = -EIO; + ret = qup_i2c_read_fifo(qup, msg); + if (ret) goto err; - } - - qup_i2c_read_fifo(qup, msg); } while (qup->pos < msg->len); err: @@ -513,6 +1228,87 @@ out: return ret; } +static int qup_i2c_xfer_v2(struct i2c_adapter *adap, + struct i2c_msg msgs[], + int num) +{ + struct qup_i2c_dev *qup = i2c_get_adapdata(adap); + int ret, len, idx = 0, use_dma = 0; + + ret = pm_runtime_get_sync(qup->dev); + if (ret < 0) + goto out; + + writel(1, qup->base + QUP_SW_RESET); + ret = qup_i2c_poll_state(qup, QUP_RESET_STATE); + if (ret) + goto out; + + /* Configure QUP as I2C mini core */ + writel(I2C_MINI_CORE | I2C_N_VAL_V2, qup->base + QUP_CONFIG); + writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN); + + if ((qup->is_dma)) { + /* All i2c_msgs should be transferred using either dma or cpu */ + for (idx = 0; idx < num; idx++) { + if (msgs[idx].len == 0) { + ret = -EINVAL; + goto out; + } + + len = (msgs[idx].len > qup->out_fifo_sz) || + (msgs[idx].len > qup->in_fifo_sz); + + if ((!is_vmalloc_addr(msgs[idx].buf)) && len) { + use_dma = 1; + } else { + use_dma = 0; + break; + } + } + } + + do { + if (msgs[idx].len == 0) { + ret = -EINVAL; + goto out; + } + + if (qup_i2c_poll_state_i2c_master(qup)) { + ret = -EIO; + goto out; + } + + qup->is_last = (idx == (num - 1)); + if (idx) + qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN; + else + qup->config_run = 0; + + reinit_completion(&qup->xfer); + + if (use_dma) { + ret = qup_i2c_bam_xfer(adap, &msgs[idx], num); + } else { + if (msgs[idx].flags & I2C_M_RD) + ret = qup_i2c_read_one_v2(qup, &msgs[idx]); + else + ret = qup_i2c_write_one_v2(qup, &msgs[idx]); + } + } while ((idx++ < (num - 1)) && !use_dma && !ret); + + if (!ret) + ret = qup_i2c_change_state(qup, QUP_RESET_STATE); + + if (ret == 0) + ret = num; +out: + pm_runtime_mark_last_busy(qup->dev); + pm_runtime_put_autosuspend(qup->dev); + + return ret; +} + static u32 qup_i2c_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); @@ -523,6 +1319,11 @@ static const struct i2c_algorithm qup_i2c_algo = { .functionality = qup_i2c_func, }; +static const struct i2c_algorithm qup_i2c_algo_v2 = { + .master_xfer = qup_i2c_xfer_v2, + .functionality = qup_i2c_func, +}; + /* * The QUP block will issue a NACK and STOP on the bus when reaching * the end of the read, the length of the read is specified as one byte @@ -561,6 +1362,7 @@ static int qup_i2c_probe(struct platform_device *pdev) int ret, fs_div, hs_div; int src_clk_freq; u32 clk_freq = 100000; + int blocks; qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL); if (!qup) @@ -572,6 +1374,68 @@ static int qup_i2c_probe(struct platform_device *pdev) of_property_read_u32(node, "clock-frequency", &clk_freq); + if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) { + qup->adap.algo = &qup_i2c_algo; + qup->adap.quirks = &qup_i2c_quirks; + } else { + qup->adap.algo = &qup_i2c_algo_v2; + ret = qup_i2c_req_dma(qup); + + if (ret == -EPROBE_DEFER) + goto fail_dma; + else if (ret != 0) + goto nodma; + + blocks = (MX_BLOCKS << 1) + 1; + qup->btx.sg = devm_kzalloc(&pdev->dev, + sizeof(*qup->btx.sg) * blocks, + GFP_KERNEL); + if (!qup->btx.sg) { + ret = -ENOMEM; + goto fail_dma; + } + sg_init_table(qup->btx.sg, blocks); + + qup->brx.sg = devm_kzalloc(&pdev->dev, + sizeof(*qup->brx.sg) * blocks, + GFP_KERNEL); + if (!qup->brx.sg) { + ret = -ENOMEM; + goto fail_dma; + } + sg_init_table(qup->brx.sg, blocks); + + /* 2 tag bytes for each block + 5 for start, stop tags */ + size = blocks * 2 + 5; + qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev, + size, 4, 0); + + qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL, + &qup->start_tag.addr); + if (!qup->start_tag.start) { + ret = -ENOMEM; + goto fail_dma; + } + + qup->brx.tag.start = dma_pool_alloc(qup->dpool, + GFP_KERNEL, + &qup->brx.tag.addr); + if (!qup->brx.tag.start) { + ret = -ENOMEM; + goto fail_dma; + } + + qup->btx.tag.start = dma_pool_alloc(qup->dpool, + GFP_KERNEL, + &qup->btx.tag.addr); + if (!qup->btx.tag.start) { + ret = -ENOMEM; + goto fail_dma; + } + qup->is_dma = true; + } + +nodma: /* We support frequencies up to FAST Mode (400KHz) */ if (!clk_freq || clk_freq > 400000) { dev_err(qup->dev, "clock frequency not supported %d\n", @@ -667,10 +1531,10 @@ static int qup_i2c_probe(struct platform_device *pdev) qup->out_blk_sz, qup->out_fifo_sz); i2c_set_adapdata(&qup->adap, qup); - qup->adap.algo = &qup_i2c_algo; - qup->adap.quirks = &qup_i2c_quirks; qup->adap.dev.parent = qup->dev; qup->adap.dev.of_node = pdev->dev.of_node; + qup->is_last = true; + strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name)); pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC); @@ -689,6 +1553,11 @@ fail_runtime: pm_runtime_set_suspended(qup->dev); fail: qup_i2c_disable_clocks(qup); +fail_dma: + if (qup->btx.dma) + dma_release_channel(qup->btx.dma); + if (qup->brx.dma) + dma_release_channel(qup->brx.dma); return ret; } @@ -696,6 +1565,18 @@ static int qup_i2c_remove(struct platform_device *pdev) { struct qup_i2c_dev *qup = platform_get_drvdata(pdev); + if (qup->is_dma) { + dma_pool_free(qup->dpool, qup->start_tag.start, + qup->start_tag.addr); + dma_pool_free(qup->dpool, qup->brx.tag.start, + qup->brx.tag.addr); + dma_pool_free(qup->dpool, qup->btx.tag.start, + qup->btx.tag.addr); + dma_pool_destroy(qup->dpool); + dma_release_channel(qup->btx.dma); + dma_release_channel(qup->brx.dma); + } + disable_irq(qup->irq); qup_i2c_disable_clocks(qup); i2c_del_adapter(&qup->adap); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 1abeadc8ab79..68ecb5630ad5 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -611,7 +611,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (IS_ERR(priv->io)) return PTR_ERR(priv->io); - priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data; + priv->devtype = (enum rcar_i2c_type)of_device_get_match_data(dev); init_waitqueue_head(&priv->wait); adap = &priv->adap; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index a0522fcc4ff8..929185a7296c 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -805,9 +805,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->hw = &tegra20_i2c_hw; if (pdev->dev.of_node) { - const struct of_device_id *match; - match = of_match_device(tegra_i2c_of_match, &pdev->dev); - i2c_dev->hw = match->data; + i2c_dev->hw = of_device_get_match_data(&pdev->dev); i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node, "nvidia,tegra20-i2c-dvc"); } else if (pdev->id == 3) { diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 6efd20095d5d..74f54f2f471f 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -37,6 +37,8 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> #define DRIVER_NAME "xiic-i2c" @@ -66,6 +68,7 @@ enum xiic_endian { * @endianness: big/little-endian byte order */ struct xiic_i2c { + struct device *dev; void __iomem *base; wait_queue_head_t wait; struct i2c_adapter adap; @@ -77,6 +80,7 @@ struct xiic_i2c { struct i2c_msg *rx_msg; int rx_pos; enum xiic_endian endianness; + struct clk *clk; }; @@ -164,6 +168,7 @@ struct xiic_i2c { #define XIIC_RESET_MASK 0xAUL +#define XIIC_PM_TIMEOUT 1000 /* ms */ /* * The following constant is used for the device global interrupt enable * register, to enable all interrupts for the device, this is the only bit @@ -676,9 +681,13 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET)); + err = pm_runtime_get_sync(i2c->dev); + if (err < 0) + return err; + err = xiic_busy(i2c); if (err) - return err; + goto out; i2c->tx_msg = msgs; i2c->nmsgs = num; @@ -686,14 +695,20 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) xiic_start_xfer(i2c); if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) || - (i2c->state == STATE_DONE), HZ)) - return (i2c->state == STATE_DONE) ? num : -EIO; - else { + (i2c->state == STATE_DONE), HZ)) { + err = (i2c->state == STATE_DONE) ? num : -EIO; + goto out; + } else { i2c->tx_msg = NULL; i2c->rx_msg = NULL; i2c->nmsgs = 0; - return -ETIMEDOUT; + err = -ETIMEDOUT; + goto out; } +out: + pm_runtime_mark_last_busy(i2c->dev); + pm_runtime_put_autosuspend(i2c->dev); + return err; } static u32 xiic_func(struct i2c_adapter *adap) @@ -748,13 +763,28 @@ static int xiic_i2c_probe(struct platform_device *pdev) mutex_init(&i2c->lock); init_waitqueue_head(&i2c->wait); + i2c->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c->clk)) { + dev_err(&pdev->dev, "input clock not found.\n"); + return PTR_ERR(i2c->clk); + } + ret = clk_prepare_enable(i2c->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } + i2c->dev = &pdev->dev; + pm_runtime_enable(i2c->dev); + pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT); + pm_runtime_use_autosuspend(i2c->dev); + pm_runtime_set_active(i2c->dev); ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr, xiic_process, IRQF_ONESHOT, pdev->name, i2c); if (ret < 0) { dev_err(&pdev->dev, "Cannot claim IRQ\n"); - return ret; + goto err_clk_dis; } /* @@ -776,7 +806,7 @@ static int xiic_i2c_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "Failed to add adapter\n"); xiic_deinit(i2c); - return ret; + goto err_clk_dis; } if (pdata) { @@ -786,16 +816,30 @@ static int xiic_i2c_probe(struct platform_device *pdev) } return 0; + +err_clk_dis: + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(i2c->clk); + return ret; } static int xiic_i2c_remove(struct platform_device *pdev) { struct xiic_i2c *i2c = platform_get_drvdata(pdev); + int ret; /* remove adapter & data */ i2c_del_adapter(&i2c->adap); + ret = clk_prepare_enable(i2c->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } xiic_deinit(i2c); + clk_disable_unprepare(i2c->clk); + pm_runtime_disable(&pdev->dev); return 0; } @@ -808,12 +852,42 @@ static const struct of_device_id xiic_of_match[] = { MODULE_DEVICE_TABLE(of, xiic_of_match); #endif +static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct xiic_i2c *i2c = platform_get_drvdata(pdev); + + clk_disable(i2c->clk); + + return 0; +} + +static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct xiic_i2c *i2c = platform_get_drvdata(pdev); + int ret; + + ret = clk_enable(i2c->clk); + if (ret) { + dev_err(dev, "Cannot enable clock.\n"); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops xiic_dev_pm_ops = { + SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend, + cdns_i2c_runtime_resume, NULL) +}; static struct platform_driver xiic_i2c_driver = { .probe = xiic_i2c_probe, .remove = xiic_i2c_remove, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(xiic_of_match), + .pm = &xiic_dev_pm_ops, }, }; diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 90e322959303..e33022e2d459 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -12,11 +12,11 @@ * GNU General Public License for more details. */ -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/slab.h> #include <linux/export.h> +#include <linux/i2c.h> +#include <linux/kernel.h> #include <linux/rwsem.h> +#include <linux/slab.h> #include "i2c-core.h" diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index ffe715d346d8..0f2f8484e8ec 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -28,32 +28,32 @@ */ #include <dt-bindings/i2c/i2c.h> -#include <linux/module.h> -#include <linux/kernel.h> +#include <asm/uaccess.h> +#include <linux/acpi.h> +#include <linux/clk/clk-conf.h> +#include <linux/completion.h> #include <linux/delay.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/gpio.h> -#include <linux/slab.h> +#include <linux/hardirq.h> #include <linux/i2c.h> -#include <linux/init.h> #include <linux/idr.h> +#include <linux/init.h> +#include <linux/irqflags.h> +#include <linux/jump_label.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/mutex.h> -#include <linux/of.h> #include <linux/of_device.h> +#include <linux/of.h> #include <linux/of_irq.h> -#include <linux/clk/clk-conf.h> -#include <linux/completion.h> -#include <linux/hardirq.h> -#include <linux/irqflags.h> -#include <linux/rwsem.h> -#include <linux/pm_runtime.h> #include <linux/pm_domain.h> +#include <linux/pm_runtime.h> #include <linux/pm_wakeirq.h> -#include <linux/acpi.h> -#include <linux/jump_label.h> -#include <asm/uaccess.h> -#include <linux/err.h> #include <linux/property.h> +#include <linux/rwsem.h> +#include <linux/slab.h> #include "i2c-core.h" @@ -73,6 +73,7 @@ static struct device_type i2c_client_type; static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver); static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE; +static bool is_registered; void i2c_transfer_trace_reg(void) { @@ -1529,7 +1530,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) int res = 0; /* Can't register until after driver model init */ - if (unlikely(WARN_ON(!i2c_bus_type.p))) { + if (WARN_ON(!is_registered)) { res = -EAGAIN; goto out_list; } @@ -1926,7 +1927,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) int res; /* Can't register until after driver model init */ - if (unlikely(WARN_ON(!i2c_bus_type.p))) + if (WARN_ON(!is_registered)) return -EAGAIN; /* add the driver to the list of i2c drivers in the driver core */ @@ -2104,6 +2105,9 @@ static int __init i2c_init(void) retval = bus_register(&i2c_bus_type); if (retval) return retval; + + is_registered = true; + #ifdef CONFIG_I2C_COMPAT i2c_adapter_compat_class = class_compat_register("i2c-adapter"); if (!i2c_adapter_compat_class) { @@ -2125,6 +2129,7 @@ class_err: class_compat_unregister(i2c_adapter_compat_class); bus_err: #endif + is_registered = false; bus_unregister(&i2c_bus_type); return retval; } diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 2413ec9f8207..0b1108d3c2f3 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -22,17 +22,17 @@ /* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */ -#include <linux/kernel.h> -#include <linux/module.h> #include <linux/device.h> -#include <linux/notifier.h> #include <linux/fs.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/i2c.h> #include <linux/i2c-dev.h> +#include <linux/i2c.h> +#include <linux/init.h> #include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/slab.h> #include <linux/uaccess.h> /* diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 00fc5b1c7b66..d4022878b2f0 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -19,13 +19,13 @@ * warranty of any kind, whether express or implied. */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> +#include <linux/acpi.h> #include <linux/i2c.h> #include <linux/i2c-mux.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> -#include <linux/acpi.h> +#include <linux/slab.h> /* multiplexer per channel data */ struct i2c_mux_priv { diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index 94765a81970d..abb55d3e76f3 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -15,14 +15,14 @@ * GNU General Public License for more details. */ -#include <linux/kernel.h> -#include <linux/module.h> #include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/workqueue.h> #include <linux/i2c.h> #include <linux/i2c-smbus.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/slab.h> +#include <linux/workqueue.h> struct i2c_smbus_alert { unsigned int alert_edge_triggered:1; diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c index af2a94e1140b..06af583d5101 100644 --- a/drivers/i2c/i2c-stub.c +++ b/drivers/i2c/i2c-stub.c @@ -17,13 +17,13 @@ #define DEBUG 1 -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/slab.h> #include <linux/errno.h> #include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <linux/list.h> +#include <linux/module.h> +#include <linux/slab.h> #define MAX_CHIPS 10 diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index f06b0e24673b..e280c8ecc0b5 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -72,4 +72,13 @@ config I2C_MUX_REG This driver can also be built as a module. If so, the module will be called i2c-mux-reg. +config I2C_DEMUX_PINCTRL + tristate "pinctrl-based I2C demultiplexer" + depends on PINCTRL && OF + select OF_DYNAMIC + help + If you say yes to this option, support will be included for an I2C + demultiplexer that uses the pinctrl subsystem. This is useful if you + want to change the I2C master at run-time depending on features. + endmenu diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile index e89799b76a92..7c267c29b191 100644 --- a/drivers/i2c/muxes/Makefile +++ b/drivers/i2c/muxes/Makefile @@ -3,6 +3,8 @@ obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o +obj-$(CONFIG_I2C_DEMUX_PINCTRL) += i2c-demux-pinctrl.o + obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c new file mode 100644 index 000000000000..7748a0a5ddb9 --- /dev/null +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -0,0 +1,272 @@ +/* + * Pinctrl based I2C DeMultiplexer + * + * Copyright (C) 2015-16 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> + * Copyright (C) 2015-16 by Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + * + * See the bindings doc for DTS setup and the sysfs doc for usage information. + * (look for filenames containing 'i2c-demux-pinctrl' in Documentation/) + */ + +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +struct i2c_demux_pinctrl_chan { + struct device_node *parent_np; + struct i2c_adapter *parent_adap; + struct of_changeset chgset; +}; + +struct i2c_demux_pinctrl_priv { + int cur_chan; + int num_chan; + struct device *dev; + const char *bus_name; + struct i2c_adapter cur_adap; + struct i2c_algorithm algo; + struct i2c_demux_pinctrl_chan chan[]; +}; + +static struct property status_okay = { .name = "status", .length = 3, .value = "ok" }; + +static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + struct i2c_demux_pinctrl_priv *priv = adap->algo_data; + struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap; + + return __i2c_transfer(parent, msgs, num); +} + +static u32 i2c_demux_functionality(struct i2c_adapter *adap) +{ + struct i2c_demux_pinctrl_priv *priv = adap->algo_data; + struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap; + + return parent->algo->functionality(parent); +} + +static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan) +{ + struct i2c_adapter *adap; + struct pinctrl *p; + int ret; + + ret = of_changeset_apply(&priv->chan[new_chan].chgset); + if (ret) + goto err; + + adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np); + if (!adap) { + ret = -ENODEV; + goto err; + } + + p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name); + if (IS_ERR(p)) { + ret = PTR_ERR(p); + goto err_with_put; + } + + priv->chan[new_chan].parent_adap = adap; + priv->cur_chan = new_chan; + + /* Now fill out current adapter structure. cur_chan must be up to date */ + priv->algo.master_xfer = i2c_demux_master_xfer; + priv->algo.functionality = i2c_demux_functionality; + + snprintf(priv->cur_adap.name, sizeof(priv->cur_adap.name), + "i2c-demux (master i2c-%d)", i2c_adapter_id(adap)); + priv->cur_adap.owner = THIS_MODULE; + priv->cur_adap.algo = &priv->algo; + priv->cur_adap.algo_data = priv; + priv->cur_adap.dev.parent = priv->dev; + priv->cur_adap.class = adap->class; + priv->cur_adap.retries = adap->retries; + priv->cur_adap.timeout = adap->timeout; + priv->cur_adap.quirks = adap->quirks; + priv->cur_adap.dev.of_node = priv->dev->of_node; + ret = i2c_add_adapter(&priv->cur_adap); + if (ret < 0) + goto err_with_put; + + return 0; + + err_with_put: + i2c_put_adapter(adap); + err: + dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret); + return ret; +} + +static int i2c_demux_deactivate_master(struct i2c_demux_pinctrl_priv *priv) +{ + int ret, cur = priv->cur_chan; + + if (cur < 0) + return 0; + + i2c_del_adapter(&priv->cur_adap); + i2c_put_adapter(priv->chan[cur].parent_adap); + + ret = of_changeset_revert(&priv->chan[cur].chgset); + + priv->chan[cur].parent_adap = NULL; + priv->cur_chan = -EINVAL; + + return ret; +} + +static int i2c_demux_change_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan) +{ + int ret; + + if (new_chan == priv->cur_chan) + return 0; + + ret = i2c_demux_deactivate_master(priv); + if (ret) + return ret; + + return i2c_demux_activate_master(priv, new_chan); +} + +static ssize_t cur_master_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev); + int count = 0, i; + + for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++) + count += scnprintf(buf + count, PAGE_SIZE - count, "%c %d - %s\n", + i == priv->cur_chan ? '*' : ' ', i, + priv->chan[i].parent_np->full_name); + + return count; +} + +static ssize_t cur_master_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev); + unsigned int val; + int ret; + + ret = kstrtouint(buf, 0, &val); + if (ret < 0) + return ret; + + if (val >= priv->num_chan) + return -EINVAL; + + ret = i2c_demux_change_master(priv, val); + + return ret < 0 ? ret : count; +} +static DEVICE_ATTR_RW(cur_master); + +static int i2c_demux_pinctrl_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct i2c_demux_pinctrl_priv *priv; + int num_chan, i, j, err; + + num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL); + if (num_chan < 2) { + dev_err(&pdev->dev, "Need at least two I2C masters to switch\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv) + + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name); + if (err) + return err; + + for (i = 0; i < num_chan; i++) { + struct device_node *adap_np; + + adap_np = of_parse_phandle(np, "i2c-parent", i); + if (!adap_np) { + dev_err(&pdev->dev, "can't get phandle for parent %d\n", i); + err = -ENOENT; + goto err_rollback; + } + priv->chan[i].parent_np = adap_np; + + of_changeset_init(&priv->chan[i].chgset); + of_changeset_update_property(&priv->chan[i].chgset, adap_np, &status_okay); + } + + priv->num_chan = num_chan; + priv->dev = &pdev->dev; + + platform_set_drvdata(pdev, priv); + + /* switch to first parent as active master */ + i2c_demux_activate_master(priv, 0); + + err = device_create_file(&pdev->dev, &dev_attr_cur_master); + if (err) + goto err_rollback; + + return 0; + +err_rollback: + for (j = 0; j < i; j++) { + of_node_put(priv->chan[j].parent_np); + of_changeset_destroy(&priv->chan[j].chgset); + } + + return err; +} + +static int i2c_demux_pinctrl_remove(struct platform_device *pdev) +{ + struct i2c_demux_pinctrl_priv *priv = platform_get_drvdata(pdev); + int i; + + device_remove_file(&pdev->dev, &dev_attr_cur_master); + + i2c_demux_deactivate_master(priv); + + for (i = 0; i < priv->num_chan; i++) { + of_node_put(priv->chan[i].parent_np); + of_changeset_destroy(&priv->chan[i].chgset); + } + + return 0; +} + +static const struct of_device_id i2c_demux_pinctrl_of_match[] = { + { .compatible = "i2c-demux-pinctrl", }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_demux_pinctrl_of_match); + +static struct platform_driver i2c_demux_pinctrl_driver = { + .driver = { + .name = "i2c-demux-pinctrl", + .of_match_table = i2c_demux_pinctrl_of_match, + }, + .probe = i2c_demux_pinctrl_probe, + .remove = i2c_demux_pinctrl_remove, +}; +module_platform_driver(i2c_demux_pinctrl_driver); + +MODULE_DESCRIPTION("pinctrl-based I2C demux driver"); +MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:i2c-demux-pinctrl"); |