diff options
27 files changed, 634 insertions, 163 deletions
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 7a3a08d81f11..89c517665763 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -102,6 +102,7 @@ more memory-management documentation in Documentation/mm/index.rst. dma-api-howto dma-attributes dma-isa-lpc + swiotlb mm-api genalloc pin_user_pages diff --git a/Documentation/core-api/swiotlb.rst b/Documentation/core-api/swiotlb.rst new file mode 100644 index 000000000000..5ad2c9ca85bc --- /dev/null +++ b/Documentation/core-api/swiotlb.rst @@ -0,0 +1,321 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +DMA and swiotlb +=============== + +swiotlb is a memory buffer allocator used by the Linux kernel DMA layer. It is +typically used when a device doing DMA can't directly access the target memory +buffer because of hardware limitations or other requirements. In such a case, +the DMA layer calls swiotlb to allocate a temporary memory buffer that conforms +to the limitations. The DMA is done to/from this temporary memory buffer, and +the CPU copies the data between the temporary buffer and the original target +memory buffer. This approach is generically called "bounce buffering", and the +temporary memory buffer is called a "bounce buffer". + +Device drivers don't interact directly with swiotlb. Instead, drivers inform +the DMA layer of the DMA attributes of the devices they are managing, and use +the normal DMA map, unmap, and sync APIs when programming a device to do DMA. +These APIs use the device DMA attributes and kernel-wide settings to determine +if bounce buffering is necessary. If so, the DMA layer manages the allocation, +freeing, and sync'ing of bounce buffers. Since the DMA attributes are per +device, some devices in a system may use bounce buffering while others do not. + +Because the CPU copies data between the bounce buffer and the original target +memory buffer, doing bounce buffering is slower than doing DMA directly to the +original memory buffer, and it consumes more CPU resources. So it is used only +when necessary for providing DMA functionality. + +Usage Scenarios +--------------- +swiotlb was originally created to handle DMA for devices with addressing +limitations. As physical memory sizes grew beyond 4 GiB, some devices could +only provide 32-bit DMA addresses. By allocating bounce buffer memory below +the 4 GiB line, these devices with addressing limitations could still work and +do DMA. + +More recently, Confidential Computing (CoCo) VMs have the guest VM's memory +encrypted by default, and the memory is not accessible by the host hypervisor +and VMM. For the host to do I/O on behalf of the guest, the I/O must be +directed to guest memory that is unencrypted. CoCo VMs set a kernel-wide option +to force all DMA I/O to use bounce buffers, and the bounce buffer memory is set +up as unencrypted. The host does DMA I/O to/from the bounce buffer memory, and +the Linux kernel DMA layer does "sync" operations to cause the CPU to copy the +data to/from the original target memory buffer. The CPU copying bridges between +the unencrypted and the encrypted memory. This use of bounce buffers allows +device drivers to "just work" in a CoCo VM, with no modifications +needed to handle the memory encryption complexity. + +Other edge case scenarios arise for bounce buffers. For example, when IOMMU +mappings are set up for a DMA operation to/from a device that is considered +"untrusted", the device should be given access only to the memory containing +the data being transferred. But if that memory occupies only part of an IOMMU +granule, other parts of the granule may contain unrelated kernel data. Since +IOMMU access control is per-granule, the untrusted device can gain access to +the unrelated kernel data. This problem is solved by bounce buffering the DMA +operation and ensuring that unused portions of the bounce buffers do not +contain any unrelated kernel data. + +Core Functionality +------------------ +The primary swiotlb APIs are swiotlb_tbl_map_single() and +swiotlb_tbl_unmap_single(). The "map" API allocates a bounce buffer of a +specified size in bytes and returns the physical address of the buffer. The +buffer memory is physically contiguous. The expectation is that the DMA layer +maps the physical memory address to a DMA address, and returns the DMA address +to the driver for programming into the device. If a DMA operation specifies +multiple memory buffer segments, a separate bounce buffer must be allocated for +each segment. swiotlb_tbl_map_single() always does a "sync" operation (i.e., a +CPU copy) to initialize the bounce buffer to match the contents of the original +buffer. + +swiotlb_tbl_unmap_single() does the reverse. If the DMA operation might have +updated the bounce buffer memory and DMA_ATTR_SKIP_CPU_SYNC is not set, the +unmap does a "sync" operation to cause a CPU copy of the data from the bounce +buffer back to the original buffer. Then the bounce buffer memory is freed. + +swiotlb also provides "sync" APIs that correspond to the dma_sync_*() APIs that +a driver may use when control of a buffer transitions between the CPU and the +device. The swiotlb "sync" APIs cause a CPU copy of the data between the +original buffer and the bounce buffer. Like the dma_sync_*() APIs, the swiotlb +"sync" APIs support doing a partial sync, where only a subset of the bounce +buffer is copied to/from the original buffer. + +Core Functionality Constraints +------------------------------ +The swiotlb map/unmap/sync APIs must operate without blocking, as they are +called by the corresponding DMA APIs which may run in contexts that cannot +block. Hence the default memory pool for swiotlb allocations must be +pre-allocated at boot time (but see Dynamic swiotlb below). Because swiotlb +allocations must be physically contiguous, the entire default memory pool is +allocated as a single contiguous block. + +The need to pre-allocate the default swiotlb pool creates a boot-time tradeoff. +The pool should be large enough to ensure that bounce buffer requests can +always be satisfied, as the non-blocking requirement means requests can't wait +for space to become available. But a large pool potentially wastes memory, as +this pre-allocated memory is not available for other uses in the system. The +tradeoff is particularly acute in CoCo VMs that use bounce buffers for all DMA +I/O. These VMs use a heuristic to set the default pool size to ~6% of memory, +with a max of 1 GiB, which has the potential to be very wasteful of memory. +Conversely, the heuristic might produce a size that is insufficient, depending +on the I/O patterns of the workload in the VM. The dynamic swiotlb feature +described below can help, but has limitations. Better management of the swiotlb +default memory pool size remains an open issue. + +A single allocation from swiotlb is limited to IO_TLB_SIZE * IO_TLB_SEGSIZE +bytes, which is 256 KiB with current definitions. When a device's DMA settings +are such that the device might use swiotlb, the maximum size of a DMA segment +must be limited to that 256 KiB. This value is communicated to higher-level +kernel code via dma_map_mapping_size() and swiotlb_max_mapping_size(). If the +higher-level code fails to account for this limit, it may make requests that +are too large for swiotlb, and get a "swiotlb full" error. + +A key device DMA setting is "min_align_mask", which is a power of 2 minus 1 +so that some number of low order bits are set, or it may be zero. swiotlb +allocations ensure these min_align_mask bits of the physical address of the +bounce buffer match the same bits in the address of the original buffer. When +min_align_mask is non-zero, it may produce an "alignment offset" in the address +of the bounce buffer that slightly reduces the maximum size of an allocation. +This potential alignment offset is reflected in the value returned by +swiotlb_max_mapping_size(), which can show up in places like +/sys/block/<device>/queue/max_sectors_kb. For example, if a device does not use +swiotlb, max_sectors_kb might be 512 KiB or larger. If a device might use +swiotlb, max_sectors_kb will be 256 KiB. When min_align_mask is non-zero, +max_sectors_kb might be even smaller, such as 252 KiB. + +swiotlb_tbl_map_single() also takes an "alloc_align_mask" parameter. This +parameter specifies the allocation of bounce buffer space must start at a +physical address with the alloc_align_mask bits set to zero. But the actual +bounce buffer might start at a larger address if min_align_mask is non-zero. +Hence there may be pre-padding space that is allocated prior to the start of +the bounce buffer. Similarly, the end of the bounce buffer is rounded up to an +alloc_align_mask boundary, potentially resulting in post-padding space. Any +pre-padding or post-padding space is not initialized by swiotlb code. The +"alloc_align_mask" parameter is used by IOMMU code when mapping for untrusted +devices. It is set to the granule size - 1 so that the bounce buffer is +allocated entirely from granules that are not used for any other purpose. + +Data structures concepts +------------------------ +Memory used for swiotlb bounce buffers is allocated from overall system memory +as one or more "pools". The default pool is allocated during system boot with a +default size of 64 MiB. The default pool size may be modified with the +"swiotlb=" kernel boot line parameter. The default size may also be adjusted +due to other conditions, such as running in a CoCo VM, as described above. If +CONFIG_SWIOTLB_DYNAMIC is enabled, additional pools may be allocated later in +the life of the system. Each pool must be a contiguous range of physical +memory. The default pool is allocated below the 4 GiB physical address line so +it works for devices that can only address 32-bits of physical memory (unless +architecture-specific code provides the SWIOTLB_ANY flag). In a CoCo VM, the +pool memory must be decrypted before swiotlb is used. + +Each pool is divided into "slots" of size IO_TLB_SIZE, which is 2 KiB with +current definitions. IO_TLB_SEGSIZE contiguous slots (128 slots) constitute +what might be called a "slot set". When a bounce buffer is allocated, it +occupies one or more contiguous slots. A slot is never shared by multiple +bounce buffers. Furthermore, a bounce buffer must be allocated from a single +slot set, which leads to the maximum bounce buffer size being IO_TLB_SIZE * +IO_TLB_SEGSIZE. Multiple smaller bounce buffers may co-exist in a single slot +set if the alignment and size constraints can be met. + +Slots are also grouped into "areas", with the constraint that a slot set exists +entirely in a single area. Each area has its own spin lock that must be held to +manipulate the slots in that area. The division into areas avoids contending +for a single global spin lock when swiotlb is heavily used, such as in a CoCo +VM. The number of areas defaults to the number of CPUs in the system for +maximum parallelism, but since an area can't be smaller than IO_TLB_SEGSIZE +slots, it might be necessary to assign multiple CPUs to the same area. The +number of areas can also be set via the "swiotlb=" kernel boot parameter. + +When allocating a bounce buffer, if the area associated with the calling CPU +does not have enough free space, areas associated with other CPUs are tried +sequentially. For each area tried, the area's spin lock must be obtained before +trying an allocation, so contention may occur if swiotlb is relatively busy +overall. But an allocation request does not fail unless all areas do not have +enough free space. + +IO_TLB_SIZE, IO_TLB_SEGSIZE, and the number of areas must all be powers of 2 as +the code uses shifting and bit masking to do many of the calculations. The +number of areas is rounded up to a power of 2 if necessary to meet this +requirement. + +The default pool is allocated with PAGE_SIZE alignment. If an alloc_align_mask +argument to swiotlb_tbl_map_single() specifies a larger alignment, one or more +initial slots in each slot set might not meet the alloc_align_mask criterium. +Because a bounce buffer allocation can't cross a slot set boundary, eliminating +those initial slots effectively reduces the max size of a bounce buffer. +Currently, there's no problem because alloc_align_mask is set based on IOMMU +granule size, and granules cannot be larger than PAGE_SIZE. But if that were to +change in the future, the initial pool allocation might need to be done with +alignment larger than PAGE_SIZE. + +Dynamic swiotlb +--------------- +When CONFIG_DYNAMIC_SWIOTLB is enabled, swiotlb can do on-demand expansion of +the amount of memory available for allocation as bounce buffers. If a bounce +buffer request fails due to lack of available space, an asynchronous background +task is kicked off to allocate memory from general system memory and turn it +into an swiotlb pool. Creating an additional pool must be done asynchronously +because the memory allocation may block, and as noted above, swiotlb requests +are not allowed to block. Once the background task is kicked off, the bounce +buffer request creates a "transient pool" to avoid returning an "swiotlb full" +error. A transient pool has the size of the bounce buffer request, and is +deleted when the bounce buffer is freed. Memory for this transient pool comes +from the general system memory atomic pool so that creation does not block. +Creating a transient pool has relatively high cost, particularly in a CoCo VM +where the memory must be decrypted, so it is done only as a stopgap until the +background task can add another non-transient pool. + +Adding a dynamic pool has limitations. Like with the default pool, the memory +must be physically contiguous, so the size is limited to MAX_PAGE_ORDER pages +(e.g., 4 MiB on a typical x86 system). Due to memory fragmentation, a max size +allocation may not be available. The dynamic pool allocator tries smaller sizes +until it succeeds, but with a minimum size of 1 MiB. Given sufficient system +memory fragmentation, dynamically adding a pool might not succeed at all. + +The number of areas in a dynamic pool may be different from the number of areas +in the default pool. Because the new pool size is typically a few MiB at most, +the number of areas will likely be smaller. For example, with a new pool size +of 4 MiB and the 256 KiB minimum area size, only 16 areas can be created. If +the system has more than 16 CPUs, multiple CPUs must share an area, creating +more lock contention. + +New pools added via dynamic swiotlb are linked together in a linear list. +swiotlb code frequently must search for the pool containing a particular +swiotlb physical address, so that search is linear and not performant with a +large number of dynamic pools. The data structures could be improved for +faster searches. + +Overall, dynamic swiotlb works best for small configurations with relatively +few CPUs. It allows the default swiotlb pool to be smaller so that memory is +not wasted, with dynamic pools making more space available if needed (as long +as fragmentation isn't an obstacle). It is less useful for large CoCo VMs. + +Data Structure Details +---------------------- +swiotlb is managed with four primary data structures: io_tlb_mem, io_tlb_pool, +io_tlb_area, and io_tlb_slot. io_tlb_mem describes a swiotlb memory allocator, +which includes the default memory pool and any dynamic or transient pools +linked to it. Limited statistics on swiotlb usage are kept per memory allocator +and are stored in this data structure. These statistics are available under +/sys/kernel/debug/swiotlb when CONFIG_DEBUG_FS is set. + +io_tlb_pool describes a memory pool, either the default pool, a dynamic pool, +or a transient pool. The description includes the start and end addresses of +the memory in the pool, a pointer to an array of io_tlb_area structures, and a +pointer to an array of io_tlb_slot structures that are associated with the pool. + +io_tlb_area describes an area. The primary field is the spin lock used to +serialize access to slots in the area. The io_tlb_area array for a pool has an +entry for each area, and is accessed using a 0-based area index derived from the +calling processor ID. Areas exist solely to allow parallel access to swiotlb +from multiple CPUs. + +io_tlb_slot describes an individual memory slot in the pool, with size +IO_TLB_SIZE (2 KiB currently). The io_tlb_slot array is indexed by the slot +index computed from the bounce buffer address relative to the starting memory +address of the pool. The size of struct io_tlb_slot is 24 bytes, so the +overhead is about 1% of the slot size. + +The io_tlb_slot array is designed to meet several requirements. First, the DMA +APIs and the corresponding swiotlb APIs use the bounce buffer address as the +identifier for a bounce buffer. This address is returned by +swiotlb_tbl_map_single(), and then passed as an argument to +swiotlb_tbl_unmap_single() and the swiotlb_sync_*() functions. The original +memory buffer address obviously must be passed as an argument to +swiotlb_tbl_map_single(), but it is not passed to the other APIs. Consequently, +swiotlb data structures must save the original memory buffer address so that it +can be used when doing sync operations. This original address is saved in the +io_tlb_slot array. + +Second, the io_tlb_slot array must handle partial sync requests. In such cases, +the argument to swiotlb_sync_*() is not the address of the start of the bounce +buffer but an address somewhere in the middle of the bounce buffer, and the +address of the start of the bounce buffer isn't known to swiotlb code. But +swiotlb code must be able to calculate the corresponding original memory buffer +address to do the CPU copy dictated by the "sync". So an adjusted original +memory buffer address is populated into the struct io_tlb_slot for each slot +occupied by the bounce buffer. An adjusted "alloc_size" of the bounce buffer is +also recorded in each struct io_tlb_slot so a sanity check can be performed on +the size of the "sync" operation. The "alloc_size" field is not used except for +the sanity check. + +Third, the io_tlb_slot array is used to track available slots. The "list" field +in struct io_tlb_slot records how many contiguous available slots exist starting +at that slot. A "0" indicates that the slot is occupied. A value of "1" +indicates only the current slot is available. A value of "2" indicates the +current slot and the next slot are available, etc. The maximum value is +IO_TLB_SEGSIZE, which can appear in the first slot in a slot set, and indicates +that the entire slot set is available. These values are used when searching for +available slots to use for a new bounce buffer. They are updated when allocating +a new bounce buffer and when freeing a bounce buffer. At pool creation time, the +"list" field is initialized to IO_TLB_SEGSIZE down to 1 for the slots in every +slot set. + +Fourth, the io_tlb_slot array keeps track of any "padding slots" allocated to +meet alloc_align_mask requirements described above. When +swiotlb_tlb_map_single() allocates bounce buffer space to meet alloc_align_mask +requirements, it may allocate pre-padding space across zero or more slots. But +when swiotbl_tlb_unmap_single() is called with the bounce buffer address, the +alloc_align_mask value that governed the allocation, and therefore the +allocation of any padding slots, is not known. The "pad_slots" field records +the number of padding slots so that swiotlb_tbl_unmap_single() can free them. +The "pad_slots" value is recorded only in the first non-padding slot allocated +to the bounce buffer. + +Restricted pools +---------------- +The swiotlb machinery is also used for "restricted pools", which are pools of +memory separate from the default swiotlb pool, and that are dedicated for DMA +use by a particular device. Restricted pools provide a level of DMA memory +protection on systems with limited hardware protection capabilities, such as +those lacking an IOMMU. Such usage is specified by DeviceTree entries and +requires that CONFIG_DMA_RESTRICTED_POOL is set. Each restricted pool is based +on its own io_tlb_mem data structure that is independent of the main swiotlb +io_tlb_mem. + +Restricted pools add swiotlb_alloc() and swiotlb_free() APIs, which are called +from the dma_alloc_*() and dma_free_*() APIs. The swiotlb_alloc/free() APIs +allocate/free slots from/to the restricted pool directly and do not go through +swiotlb_tbl_map/unmap_single(). diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index eca1afa36508..f731e4b2a417 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -1152,9 +1152,6 @@ static dma_addr_t iommu_dma_map_page(struct device *dev, struct page *page, */ if (dev_use_swiotlb(dev, size, dir) && iova_offset(iovad, phys | size)) { - void *padding_start; - size_t padding_size, aligned_size; - if (!is_swiotlb_active(dev)) { dev_warn_once(dev, "DMA bounce buffers are inactive, unable to map unaligned transaction.\n"); return DMA_MAPPING_ERROR; @@ -1162,24 +1159,30 @@ static dma_addr_t iommu_dma_map_page(struct device *dev, struct page *page, trace_swiotlb_bounced(dev, phys, size); - aligned_size = iova_align(iovad, size); - phys = swiotlb_tbl_map_single(dev, phys, size, aligned_size, + phys = swiotlb_tbl_map_single(dev, phys, size, iova_mask(iovad), dir, attrs); if (phys == DMA_MAPPING_ERROR) return DMA_MAPPING_ERROR; - /* Cleanup the padding area. */ - padding_start = phys_to_virt(phys); - padding_size = aligned_size; + /* + * Untrusted devices should not see padding areas with random + * leftover kernel data, so zero the pre- and post-padding. + * swiotlb_tbl_map_single() has initialized the bounce buffer + * proper to the contents of the original memory buffer. + */ + if (dev_is_untrusted(dev)) { + size_t start, virt = (size_t)phys_to_virt(phys); - if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && - (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) { - padding_start += size; - padding_size -= size; - } + /* Pre-padding */ + start = iova_align_down(iovad, virt); + memset((void *)start, 0, virt - start); - memset(padding_start, 0, padding_size); + /* Post-padding */ + start = virt + size; + memset((void *)start, 0, + iova_align(iovad, start) - start); + } } if (!coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) @@ -1718,7 +1721,8 @@ static size_t iommu_dma_max_mapping_size(struct device *dev) } static const struct dma_map_ops iommu_dma_ops = { - .flags = DMA_F_PCI_P2PDMA_SUPPORTED, + .flags = DMA_F_PCI_P2PDMA_SUPPORTED | + DMA_F_CAN_SKIP_SYNC, .alloc = iommu_dma_alloc, .free = iommu_dma_free, .alloc_pages_op = dma_common_alloc_pages, diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c index 4b15af6b7122..44da335d66bd 100644 --- a/drivers/net/ethernet/engleder/tsnep_main.c +++ b/drivers/net/ethernet/engleder/tsnep_main.c @@ -1587,7 +1587,7 @@ static int tsnep_rx_poll_zc(struct tsnep_rx *rx, struct napi_struct *napi, length = __le32_to_cpu(entry->desc_wb->properties) & TSNEP_DESC_LENGTH_MASK; xsk_buff_set_size(entry->xdp, length - ETH_FCS_LEN); - xsk_buff_dma_sync_for_cpu(entry->xdp, rx->xsk_pool); + xsk_buff_dma_sync_for_cpu(entry->xdp); /* RX metadata with timestamps is in front of actual data, * subtract metadata size to get length of actual data and diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-xsk.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-xsk.c index 051748b997f3..a466c2379146 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-xsk.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-xsk.c @@ -55,7 +55,7 @@ static u32 dpaa2_xsk_run_xdp(struct dpaa2_eth_priv *priv, xdp_set_data_meta_invalid(xdp_buff); xdp_buff->rxq = &ch->xdp_rxq; - xsk_buff_dma_sync_for_cpu(xdp_buff, ch->xsk_pool); + xsk_buff_dma_sync_for_cpu(xdp_buff); xdp_act = bpf_prog_run_xdp(xdp_prog, xdp_buff); /* xdp.data pointer may have changed */ diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c index a85b425794df..4e885df789ef 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c +++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c @@ -482,7 +482,7 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget) bi = *i40e_rx_bi(rx_ring, next_to_process); xsk_buff_set_size(bi, size); - xsk_buff_dma_sync_for_cpu(bi, rx_ring->xsk_pool); + xsk_buff_dma_sync_for_cpu(bi); if (!first) first = bi; diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c index aa81d1162b81..7541f223bf4f 100644 --- a/drivers/net/ethernet/intel/ice/ice_xsk.c +++ b/drivers/net/ethernet/intel/ice/ice_xsk.c @@ -878,7 +878,7 @@ int ice_clean_rx_irq_zc(struct ice_rx_ring *rx_ring, int budget) ICE_RX_FLX_DESC_PKT_LEN_M; xsk_buff_set_size(xdp, size); - xsk_buff_dma_sync_for_cpu(xdp, xsk_pool); + xsk_buff_dma_sync_for_cpu(xdp); if (!first) { first = xdp; diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index b5bcabab7a1d..12f004f46082 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -2812,7 +2812,7 @@ static int igc_clean_rx_irq_zc(struct igc_q_vector *q_vector, const int budget) } bi->xdp->data_end = bi->xdp->data + size; - xsk_buff_dma_sync_for_cpu(bi->xdp, ring->xsk_pool); + xsk_buff_dma_sync_for_cpu(bi->xdp); res = __igc_xdp_run_prog(adapter, prog, bi->xdp); switch (res) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c index 397cb773fabb..3e3b471e53f0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c @@ -303,7 +303,7 @@ int ixgbe_clean_rx_irq_zc(struct ixgbe_q_vector *q_vector, } bi->xdp->data_end = bi->xdp->data + size; - xsk_buff_dma_sync_for_cpu(bi->xdp, rx_ring->xsk_pool); + xsk_buff_dma_sync_for_cpu(bi->xdp); xdp_res = ixgbe_run_xdp_zc(adapter, rx_ring, bi->xdp); if (likely(xdp_res & (IXGBE_XDP_TX | IXGBE_XDP_REDIR))) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c index b8dd74453655..1b7132fa70de 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c @@ -270,7 +270,7 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_mpwrq_linear(struct mlx5e_rq *rq, /* mxbuf->rq is set on allocation, but cqe is per-packet so set it here */ mxbuf->cqe = cqe; xsk_buff_set_size(&mxbuf->xdp, cqe_bcnt); - xsk_buff_dma_sync_for_cpu(&mxbuf->xdp, rq->xsk_pool); + xsk_buff_dma_sync_for_cpu(&mxbuf->xdp); net_prefetch(mxbuf->xdp.data); /* Possible flows: @@ -319,7 +319,7 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_linear(struct mlx5e_rq *rq, /* mxbuf->rq is set on allocation, but cqe is per-packet so set it here */ mxbuf->cqe = cqe; xsk_buff_set_size(&mxbuf->xdp, cqe_bcnt); - xsk_buff_dma_sync_for_cpu(&mxbuf->xdp, rq->xsk_pool); + xsk_buff_dma_sync_for_cpu(&mxbuf->xdp); net_prefetch(mxbuf->xdp.data); prog = rcu_dereference(rq->xdp_prog); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index d601b5faaed5..b5333da20e8a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -917,7 +917,7 @@ INDIRECT_CALLABLE_SCOPE bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq) if (!rq->xsk_pool) { count = mlx5e_refill_rx_wqes(rq, head, wqe_bulk); - } else if (likely(!rq->xsk_pool->dma_need_sync)) { + } else if (likely(!dma_dev_need_sync(rq->pdev))) { mlx5e_xsk_free_rx_wqes(rq, head, wqe_bulk); count = mlx5e_xsk_alloc_rx_wqes_batched(rq, head, wqe_bulk); } else { diff --git a/drivers/net/ethernet/netronome/nfp/nfd3/xsk.c b/drivers/net/ethernet/netronome/nfp/nfd3/xsk.c index 45be6954d5aa..01cfa9cc1b5e 100644 --- a/drivers/net/ethernet/netronome/nfp/nfd3/xsk.c +++ b/drivers/net/ethernet/netronome/nfp/nfd3/xsk.c @@ -184,7 +184,7 @@ nfp_nfd3_xsk_rx(struct nfp_net_rx_ring *rx_ring, int budget, xrxbuf->xdp->data += meta_len; xrxbuf->xdp->data_end = xrxbuf->xdp->data + pkt_len; xdp_set_data_meta_invalid(xrxbuf->xdp); - xsk_buff_dma_sync_for_cpu(xrxbuf->xdp, r_vec->xsk_pool); + xsk_buff_dma_sync_for_cpu(xrxbuf->xdp); net_prefetch(xrxbuf->xdp->data); if (meta_len) { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 2e9a2da605f6..b3afc7cb7d72 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -5361,7 +5361,7 @@ read_again: /* RX buffer is good and fit into a XSK pool buffer */ buf->xdp->data_end = buf->xdp->data + buf1_len; - xsk_buff_dma_sync_for_cpu(buf->xdp, rx_q->xsk_pool); + xsk_buff_dma_sync_for_cpu(buf->xdp); prog = READ_ONCE(priv->xdp_prog); res = __stmmac_xdp_run_prog(priv, prog, buf->xdp); diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 1c4ef5111651..6579ae3f6dac 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -216,7 +216,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page, */ trace_swiotlb_bounced(dev, dev_addr, size); - map = swiotlb_tbl_map_single(dev, phys, size, size, 0, dir, attrs); + map = swiotlb_tbl_map_single(dev, phys, size, 0, dir, attrs); if (map == (phys_addr_t)DMA_MAPPING_ERROR) return DMA_MAPPING_ERROR; diff --git a/include/linux/device.h b/include/linux/device.h index b9f5464f44ed..d4b50accff26 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -691,6 +691,7 @@ struct device_physical_location { * and optionall (if the coherent mask is large enough) also * for dma allocations. This flag is managed by the dma ops * instance from ->dma_supported. + * @dma_skip_sync: DMA sync operations can be skipped for coherent buffers. * * At the lowest level, every device in a Linux system is represented by an * instance of struct device. The device structure contains the information @@ -803,6 +804,9 @@ struct device { #ifdef CONFIG_DMA_OPS_BYPASS bool dma_ops_bypass : 1; #endif +#ifdef CONFIG_DMA_NEED_SYNC + bool dma_skip_sync:1; +#endif }; /** diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h index bdb3abb77a87..02a1c825896b 100644 --- a/include/linux/dma-map-ops.h +++ b/include/linux/dma-map-ops.h @@ -18,8 +18,11 @@ struct iommu_ops; * * DMA_F_PCI_P2PDMA_SUPPORTED: Indicates the dma_map_ops implementation can * handle PCI P2PDMA pages in the map_sg/unmap_sg operation. + * DMA_F_CAN_SKIP_SYNC: DMA sync operations can be skipped if the device is + * coherent and it's not an SWIOTLB buffer. */ #define DMA_F_PCI_P2PDMA_SUPPORTED (1 << 0) +#define DMA_F_CAN_SKIP_SYNC (1 << 1) struct dma_map_ops { unsigned int flags; @@ -273,6 +276,15 @@ static inline bool dev_is_dma_coherent(struct device *dev) } #endif /* CONFIG_ARCH_HAS_DMA_COHERENCE_H */ +static inline void dma_reset_need_sync(struct device *dev) +{ +#ifdef CONFIG_DMA_NEED_SYNC + /* Reset it only once so that the function can be called on hotpath */ + if (unlikely(dev->dma_skip_sync)) + dev->dma_skip_sync = false; +#endif +} + /* * Check whether potential kmalloc() buffers are safe for non-coherent DMA. */ diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 4a658de44ee9..f693aafe221f 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -117,14 +117,6 @@ dma_addr_t dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size, enum dma_data_direction dir, unsigned long attrs); void dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir, unsigned long attrs); -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, - enum dma_data_direction dir); -void dma_sync_single_for_device(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir); -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir); -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir); void *dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag, unsigned long attrs); void dma_free_attrs(struct device *dev, size_t size, void *cpu_addr, @@ -147,7 +139,6 @@ u64 dma_get_required_mask(struct device *dev); bool dma_addressing_limited(struct device *dev); size_t dma_max_mapping_size(struct device *dev); size_t dma_opt_mapping_size(struct device *dev); -bool dma_need_sync(struct device *dev, dma_addr_t dma_addr); unsigned long dma_get_merge_boundary(struct device *dev); struct sg_table *dma_alloc_noncontiguous(struct device *dev, size_t size, enum dma_data_direction dir, gfp_t gfp, unsigned long attrs); @@ -195,22 +186,6 @@ static inline void dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir, unsigned long attrs) { } -static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir) -{ -} -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t addr, size_t size, enum dma_data_direction dir) -{ -} -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, int nelems, enum dma_data_direction dir) -{ -} -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, enum dma_data_direction dir) -{ -} static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return -ENOMEM; @@ -277,10 +252,6 @@ static inline size_t dma_opt_mapping_size(struct device *dev) { return 0; } -static inline bool dma_need_sync(struct device *dev, dma_addr_t dma_addr) -{ - return false; -} static inline unsigned long dma_get_merge_boundary(struct device *dev) { return 0; @@ -310,6 +281,82 @@ static inline int dma_mmap_noncontiguous(struct device *dev, } #endif /* CONFIG_HAS_DMA */ +#if defined(CONFIG_HAS_DMA) && defined(CONFIG_DMA_NEED_SYNC) +void __dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, + enum dma_data_direction dir); +void __dma_sync_single_for_device(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir); +void __dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction dir); +void __dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction dir); +bool __dma_need_sync(struct device *dev, dma_addr_t dma_addr); + +static inline bool dma_dev_need_sync(const struct device *dev) +{ + /* Always call DMA sync operations when debugging is enabled */ + return !dev->dma_skip_sync || IS_ENABLED(CONFIG_DMA_API_DEBUG); +} + +static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ + if (dma_dev_need_sync(dev)) + __dma_sync_single_for_cpu(dev, addr, size, dir); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t addr, size_t size, enum dma_data_direction dir) +{ + if (dma_dev_need_sync(dev)) + __dma_sync_single_for_device(dev, addr, size, dir); +} + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, enum dma_data_direction dir) +{ + if (dma_dev_need_sync(dev)) + __dma_sync_sg_for_cpu(dev, sg, nelems, dir); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, enum dma_data_direction dir) +{ + if (dma_dev_need_sync(dev)) + __dma_sync_sg_for_device(dev, sg, nelems, dir); +} + +static inline bool dma_need_sync(struct device *dev, dma_addr_t dma_addr) +{ + return dma_dev_need_sync(dev) ? __dma_need_sync(dev, dma_addr) : false; +} +#else /* !CONFIG_HAS_DMA || !CONFIG_DMA_NEED_SYNC */ +static inline bool dma_dev_need_sync(const struct device *dev) +{ + return false; +} +static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ +} +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t addr, size_t size, enum dma_data_direction dir) +{ +} +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, enum dma_data_direction dir) +{ +} +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, enum dma_data_direction dir) +{ +} +static inline bool dma_need_sync(struct device *dev, dma_addr_t dma_addr) +{ + return false; +} +#endif /* !CONFIG_HAS_DMA || !CONFIG_DMA_NEED_SYNC */ + struct page *dma_alloc_pages(struct device *dev, size_t size, dma_addr_t *dma_handle, enum dma_data_direction dir, gfp_t gfp); void dma_free_pages(struct device *dev, size_t size, struct page *page, diff --git a/include/linux/iova.h b/include/linux/iova.h index 83c00fac2acb..d2c4fd923efa 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -65,6 +65,11 @@ static inline size_t iova_align(struct iova_domain *iovad, size_t size) return ALIGN(size, iovad->granule); } +static inline size_t iova_align_down(struct iova_domain *iovad, size_t size) +{ + return ALIGN_DOWN(size, iovad->granule); +} + static inline dma_addr_t iova_dma_addr(struct iova_domain *iovad, struct iova *iova) { return (dma_addr_t)iova->pfn_lo << iova_shift(iovad); diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h index ea23097e351f..14bc10c1bb23 100644 --- a/include/linux/swiotlb.h +++ b/include/linux/swiotlb.h @@ -43,7 +43,7 @@ int swiotlb_init_late(size_t size, gfp_t gfp_mask, extern void __init swiotlb_update_mem_attributes(void); phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, phys_addr_t phys, - size_t mapping_size, size_t alloc_size, + size_t mapping_size, unsigned int alloc_aligned_mask, enum dma_data_direction dir, unsigned long attrs); diff --git a/include/net/page_pool/types.h b/include/net/page_pool/types.h index a6ebed002216..b088d131aeb0 100644 --- a/include/net/page_pool/types.h +++ b/include/net/page_pool/types.h @@ -45,7 +45,6 @@ struct pp_alloc_cache { /** * struct page_pool_params - page pool parameters - * @flags: PP_FLAG_DMA_MAP, PP_FLAG_DMA_SYNC_DEV * @order: 2^order pages on allocation * @pool_size: size of the ptr_ring * @nid: NUMA node id to allocate from pages from @@ -55,10 +54,11 @@ struct pp_alloc_cache { * @dma_dir: DMA mapping direction * @max_len: max DMA sync memory size for PP_FLAG_DMA_SYNC_DEV * @offset: DMA sync address offset for PP_FLAG_DMA_SYNC_DEV + * @netdev: corresponding &net_device for Netlink introspection + * @flags: PP_FLAG_DMA_MAP, PP_FLAG_DMA_SYNC_DEV, PP_FLAG_SYSTEM_POOL */ struct page_pool_params { struct_group_tagged(page_pool_params_fast, fast, - unsigned int flags; unsigned int order; unsigned int pool_size; int nid; @@ -70,6 +70,7 @@ struct page_pool_params { ); struct_group_tagged(page_pool_params_slow, slow, struct net_device *netdev; + unsigned int flags; /* private: used by test code only */ void (*init_callback)(struct page *page, void *arg); void *init_arg; @@ -130,12 +131,28 @@ struct page_pool { struct page_pool_params_fast p; int cpuid; - bool has_init_callback; + u32 pages_state_hold_cnt; + + bool has_init_callback:1; /* slow::init_callback is set */ + bool dma_map:1; /* Perform DMA mapping */ + bool dma_sync:1; /* Perform DMA sync */ +#ifdef CONFIG_PAGE_POOL_STATS + bool system:1; /* This is a global percpu pool */ +#endif + /* The following block must stay within one cacheline. On 32-bit + * systems, sizeof(long) == sizeof(int), so that the block size is + * ``3 * sizeof(long)``. On 64-bit systems, the actual size is + * ``2 * sizeof(long) + sizeof(int)``. The closest pow-2 to both of + * them is ``4 * sizeof(long)``, so just use that one for simplicity. + * Having it aligned to a cacheline boundary may be excessive and + * doesn't bring any good. + */ + __cacheline_group_begin(frag) __aligned(4 * sizeof(long)); long frag_users; struct page *frag_page; unsigned int frag_offset; - u32 pages_state_hold_cnt; + __cacheline_group_end(frag); struct delayed_work release_dw; void (*disconnect)(void *pool); diff --git a/include/net/xdp_sock_drv.h b/include/net/xdp_sock_drv.h index c9aec9ab6191..0a5dca2b2b3f 100644 --- a/include/net/xdp_sock_drv.h +++ b/include/net/xdp_sock_drv.h @@ -219,13 +219,10 @@ static inline struct xsk_tx_metadata *xsk_buff_get_metadata(struct xsk_buff_pool return meta; } -static inline void xsk_buff_dma_sync_for_cpu(struct xdp_buff *xdp, struct xsk_buff_pool *pool) +static inline void xsk_buff_dma_sync_for_cpu(struct xdp_buff *xdp) { struct xdp_buff_xsk *xskb = container_of(xdp, struct xdp_buff_xsk, xdp); - if (!pool->dma_need_sync) - return; - xp_dma_sync_for_cpu(xskb); } @@ -402,7 +399,7 @@ static inline struct xsk_tx_metadata *xsk_buff_get_metadata(struct xsk_buff_pool return NULL; } -static inline void xsk_buff_dma_sync_for_cpu(struct xdp_buff *xdp, struct xsk_buff_pool *pool) +static inline void xsk_buff_dma_sync_for_cpu(struct xdp_buff *xdp) { } diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h index 99dd7376df6a..bacb33f1e3e5 100644 --- a/include/net/xsk_buff_pool.h +++ b/include/net/xsk_buff_pool.h @@ -43,7 +43,6 @@ struct xsk_dma_map { refcount_t users; struct list_head list; /* Protected by the RTNL_LOCK */ u32 dma_pages_cnt; - bool dma_need_sync; }; struct xsk_buff_pool { @@ -82,7 +81,6 @@ struct xsk_buff_pool { u8 tx_metadata_len; /* inherited from umem */ u8 cached_need_wakeup; bool uses_need_wakeup; - bool dma_need_sync; bool unaligned; bool tx_sw_csum; void *addrs; @@ -155,21 +153,17 @@ static inline dma_addr_t xp_get_frame_dma(struct xdp_buff_xsk *xskb) return xskb->frame_dma; } -void xp_dma_sync_for_cpu_slow(struct xdp_buff_xsk *xskb); static inline void xp_dma_sync_for_cpu(struct xdp_buff_xsk *xskb) { - xp_dma_sync_for_cpu_slow(xskb); + dma_sync_single_for_cpu(xskb->pool->dev, xskb->dma, + xskb->pool->frame_len, + DMA_BIDIRECTIONAL); } -void xp_dma_sync_for_device_slow(struct xsk_buff_pool *pool, dma_addr_t dma, - size_t size); static inline void xp_dma_sync_for_device(struct xsk_buff_pool *pool, dma_addr_t dma, size_t size) { - if (!pool->dma_need_sync) - return; - - xp_dma_sync_for_device_slow(pool, dma, size); + dma_sync_single_for_device(pool->dev, dma, size, DMA_BIDIRECTIONAL); } /* Masks for xdp_umem_page flags. diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig index d62f5957f36b..c06e56be0ca1 100644 --- a/kernel/dma/Kconfig +++ b/kernel/dma/Kconfig @@ -107,6 +107,11 @@ config DMA_BOUNCE_UNALIGNED_KMALLOC bool depends on SWIOTLB +config DMA_NEED_SYNC + def_bool ARCH_HAS_SYNC_DMA_FOR_DEVICE || ARCH_HAS_SYNC_DMA_FOR_CPU || \ + ARCH_HAS_SYNC_DMA_FOR_CPU_ALL || DMA_API_DEBUG || DMA_OPS || \ + SWIOTLB + config DMA_RESTRICTED_POOL bool "DMA Restricted Pool" depends on OF && OF_RESERVED_MEM && SWIOTLB diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c index 5e2d51e1cdf6..81de84318ccc 100644 --- a/kernel/dma/mapping.c +++ b/kernel/dma/mapping.c @@ -329,7 +329,8 @@ void dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size, } EXPORT_SYMBOL(dma_unmap_resource); -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, +#ifdef CONFIG_DMA_NEED_SYNC +void __dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) { const struct dma_map_ops *ops = get_dma_ops(dev); @@ -341,9 +342,9 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, ops->sync_single_for_cpu(dev, addr, size, dir); debug_dma_sync_single_for_cpu(dev, addr, size, dir); } -EXPORT_SYMBOL(dma_sync_single_for_cpu); +EXPORT_SYMBOL(__dma_sync_single_for_cpu); -void dma_sync_single_for_device(struct device *dev, dma_addr_t addr, +void __dma_sync_single_for_device(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) { const struct dma_map_ops *ops = get_dma_ops(dev); @@ -355,9 +356,9 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t addr, ops->sync_single_for_device(dev, addr, size, dir); debug_dma_sync_single_for_device(dev, addr, size, dir); } -EXPORT_SYMBOL(dma_sync_single_for_device); +EXPORT_SYMBOL(__dma_sync_single_for_device); -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, +void __dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction dir) { const struct dma_map_ops *ops = get_dma_ops(dev); @@ -369,9 +370,9 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, ops->sync_sg_for_cpu(dev, sg, nelems, dir); debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir); } -EXPORT_SYMBOL(dma_sync_sg_for_cpu); +EXPORT_SYMBOL(__dma_sync_sg_for_cpu); -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, +void __dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction dir) { const struct dma_map_ops *ops = get_dma_ops(dev); @@ -383,7 +384,47 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, ops->sync_sg_for_device(dev, sg, nelems, dir); debug_dma_sync_sg_for_device(dev, sg, nelems, dir); } -EXPORT_SYMBOL(dma_sync_sg_for_device); +EXPORT_SYMBOL(__dma_sync_sg_for_device); + +bool __dma_need_sync(struct device *dev, dma_addr_t dma_addr) +{ + const struct dma_map_ops *ops = get_dma_ops(dev); + + if (dma_map_direct(dev, ops)) + /* + * dma_skip_sync could've been reset on first SWIOTLB buffer + * mapping, but @dma_addr is not necessary an SWIOTLB buffer. + * In this case, fall back to more granular check. + */ + return dma_direct_need_sync(dev, dma_addr); + return true; +} +EXPORT_SYMBOL_GPL(__dma_need_sync); + +static void dma_setup_need_sync(struct device *dev) +{ + const struct dma_map_ops *ops = get_dma_ops(dev); + + if (dma_map_direct(dev, ops) || (ops->flags & DMA_F_CAN_SKIP_SYNC)) + /* + * dma_skip_sync will be reset to %false on first SWIOTLB buffer + * mapping, if any. During the device initialization, it's + * enough to check only for the DMA coherence. + */ + dev->dma_skip_sync = dev_is_dma_coherent(dev); + else if (!ops->sync_single_for_device && !ops->sync_single_for_cpu && + !ops->sync_sg_for_device && !ops->sync_sg_for_cpu) + /* + * Synchronization is not possible when none of DMA sync ops + * is set. + */ + dev->dma_skip_sync = true; + else + dev->dma_skip_sync = false; +} +#else /* !CONFIG_DMA_NEED_SYNC */ +static inline void dma_setup_need_sync(struct device *dev) { } +#endif /* !CONFIG_DMA_NEED_SYNC */ /* * The whole dma_get_sgtable() idea is fundamentally unsafe - it seems @@ -773,6 +814,8 @@ int dma_set_mask(struct device *dev, u64 mask) arch_dma_set_mask(dev, mask); *dev->dma_mask = mask; + dma_setup_need_sync(dev); + return 0; } EXPORT_SYMBOL(dma_set_mask); @@ -841,16 +884,6 @@ size_t dma_opt_mapping_size(struct device *dev) } EXPORT_SYMBOL_GPL(dma_opt_mapping_size); -bool dma_need_sync(struct device *dev, dma_addr_t dma_addr) -{ - const struct dma_map_ops *ops = get_dma_ops(dev); - - if (dma_map_direct(dev, ops)) - return dma_direct_need_sync(dev, dma_addr); - return ops->sync_single_for_cpu || ops->sync_single_for_device; -} -EXPORT_SYMBOL_GPL(dma_need_sync); - unsigned long dma_get_merge_boundary(struct device *dev) { const struct dma_map_ops *ops = get_dma_ops(dev); diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 0de66f0ff43a..fe1ccb53596f 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -1340,15 +1340,40 @@ static unsigned long mem_used(struct io_tlb_mem *mem) #endif /* CONFIG_DEBUG_FS */ +/** + * swiotlb_tbl_map_single() - bounce buffer map a single contiguous physical area + * @dev: Device which maps the buffer. + * @orig_addr: Original (non-bounced) physical IO buffer address + * @mapping_size: Requested size of the actual bounce buffer, excluding + * any pre- or post-padding for alignment + * @alloc_align_mask: Required start and end alignment of the allocated buffer + * @dir: DMA direction + * @attrs: Optional DMA attributes for the map operation + * + * Find and allocate a suitable sequence of IO TLB slots for the request. + * The allocated space starts at an alignment specified by alloc_align_mask, + * and the size of the allocated space is rounded up so that the total amount + * of allocated space is a multiple of (alloc_align_mask + 1). If + * alloc_align_mask is zero, the allocated space may be at any alignment and + * the size is not rounded up. + * + * The returned address is within the allocated space and matches the bits + * of orig_addr that are specified in the DMA min_align_mask for the device. As + * such, this returned address may be offset from the beginning of the allocated + * space. The bounce buffer space starting at the returned address for + * mapping_size bytes is initialized to the contents of the original IO buffer + * area. Any pre-padding (due to an offset) and any post-padding (due to + * rounding-up the size) is not initialized. + */ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, - size_t mapping_size, size_t alloc_size, - unsigned int alloc_align_mask, enum dma_data_direction dir, - unsigned long attrs) + size_t mapping_size, unsigned int alloc_align_mask, + enum dma_data_direction dir, unsigned long attrs) { struct io_tlb_mem *mem = dev->dma_io_tlb_mem; unsigned int offset; struct io_tlb_pool *pool; unsigned int i; + size_t size; int index; phys_addr_t tlb_addr; unsigned short pad_slots; @@ -1362,24 +1387,34 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) pr_warn_once("Memory encryption is active and system is using DMA bounce buffers\n"); - if (mapping_size > alloc_size) { - dev_warn_once(dev, "Invalid sizes (mapping: %zd bytes, alloc: %zd bytes)", - mapping_size, alloc_size); - return (phys_addr_t)DMA_MAPPING_ERROR; - } + /* + * The default swiotlb memory pool is allocated with PAGE_SIZE + * alignment. If a mapping is requested with larger alignment, + * the mapping may be unable to use the initial slot(s) in all + * sets of IO_TLB_SEGSIZE slots. In such case, a mapping request + * of or near the maximum mapping size would always fail. + */ + dev_WARN_ONCE(dev, alloc_align_mask > ~PAGE_MASK, + "Alloc alignment may prevent fulfilling requests with max mapping_size\n"); offset = swiotlb_align_offset(dev, alloc_align_mask, orig_addr); - index = swiotlb_find_slots(dev, orig_addr, - alloc_size + offset, alloc_align_mask, &pool); + size = ALIGN(mapping_size + offset, alloc_align_mask + 1); + index = swiotlb_find_slots(dev, orig_addr, size, alloc_align_mask, &pool); if (index == -1) { if (!(attrs & DMA_ATTR_NO_WARN)) dev_warn_ratelimited(dev, "swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n", - alloc_size, mem->nslabs, mem_used(mem)); + size, mem->nslabs, mem_used(mem)); return (phys_addr_t)DMA_MAPPING_ERROR; } /* + * If dma_skip_sync was set, reset it on first SWIOTLB buffer + * mapping to always sync SWIOTLB buffers. + */ + dma_reset_need_sync(dev); + + /* * Save away the mapping from the original address to the DMA address. * This is needed when we sync the memory. Then we sync the buffer if * needed. @@ -1388,7 +1423,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, offset &= (IO_TLB_SIZE - 1); index += pad_slots; pool->slots[index].pad_slots = pad_slots; - for (i = 0; i < nr_slots(alloc_size + offset); i++) + for (i = 0; i < (nr_slots(size) - pad_slots); i++) pool->slots[index + i].orig_addr = slot_addr(orig_addr, i); tlb_addr = slot_addr(pool->start, index) + offset; /* @@ -1543,8 +1578,7 @@ dma_addr_t swiotlb_map(struct device *dev, phys_addr_t paddr, size_t size, trace_swiotlb_bounced(dev, phys_to_dma(dev, paddr), size); - swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, size, 0, dir, - attrs); + swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, 0, dir, attrs); if (swiotlb_addr == (phys_addr_t)DMA_MAPPING_ERROR) return DMA_MAPPING_ERROR; diff --git a/net/core/page_pool.c b/net/core/page_pool.c index 8bcc7014a61a..f4444b4e39e6 100644 --- a/net/core/page_pool.c +++ b/net/core/page_pool.c @@ -173,19 +173,29 @@ static void page_pool_producer_unlock(struct page_pool *pool, spin_unlock_bh(&pool->ring.producer_lock); } +static void page_pool_struct_check(void) +{ + CACHELINE_ASSERT_GROUP_MEMBER(struct page_pool, frag, frag_users); + CACHELINE_ASSERT_GROUP_MEMBER(struct page_pool, frag, frag_page); + CACHELINE_ASSERT_GROUP_MEMBER(struct page_pool, frag, frag_offset); + CACHELINE_ASSERT_GROUP_SIZE(struct page_pool, frag, 4 * sizeof(long)); +} + static int page_pool_init(struct page_pool *pool, const struct page_pool_params *params, int cpuid) { unsigned int ring_qsize = 1024; /* Default */ + page_pool_struct_check(); + memcpy(&pool->p, ¶ms->fast, sizeof(pool->p)); memcpy(&pool->slow, ¶ms->slow, sizeof(pool->slow)); pool->cpuid = cpuid; /* Validate only known flags were used */ - if (pool->p.flags & ~(PP_FLAG_ALL)) + if (pool->slow.flags & ~PP_FLAG_ALL) return -EINVAL; if (pool->p.pool_size) @@ -199,22 +209,26 @@ static int page_pool_init(struct page_pool *pool, * DMA_BIDIRECTIONAL is for allowing page used for DMA sending, * which is the XDP_TX use-case. */ - if (pool->p.flags & PP_FLAG_DMA_MAP) { + if (pool->slow.flags & PP_FLAG_DMA_MAP) { if ((pool->p.dma_dir != DMA_FROM_DEVICE) && (pool->p.dma_dir != DMA_BIDIRECTIONAL)) return -EINVAL; + + pool->dma_map = true; } - if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV) { + if (pool->slow.flags & PP_FLAG_DMA_SYNC_DEV) { /* In order to request DMA-sync-for-device the page * needs to be mapped */ - if (!(pool->p.flags & PP_FLAG_DMA_MAP)) + if (!(pool->slow.flags & PP_FLAG_DMA_MAP)) return -EINVAL; if (!pool->p.max_len) return -EINVAL; + pool->dma_sync = true; + /* pool->p.offset has to be set according to the address * offset used by the DMA engine to start copying rx data */ @@ -223,7 +237,7 @@ static int page_pool_init(struct page_pool *pool, pool->has_init_callback = !!pool->slow.init_callback; #ifdef CONFIG_PAGE_POOL_STATS - if (!(pool->p.flags & PP_FLAG_SYSTEM_POOL)) { + if (!(pool->slow.flags & PP_FLAG_SYSTEM_POOL)) { pool->recycle_stats = alloc_percpu(struct page_pool_recycle_stats); if (!pool->recycle_stats) return -ENOMEM; @@ -233,12 +247,13 @@ static int page_pool_init(struct page_pool *pool, * (also percpu) page pool instance. */ pool->recycle_stats = &pp_system_recycle_stats; + pool->system = true; } #endif if (ptr_ring_init(&pool->ring, ring_qsize, GFP_KERNEL) < 0) { #ifdef CONFIG_PAGE_POOL_STATS - if (!(pool->p.flags & PP_FLAG_SYSTEM_POOL)) + if (!pool->system) free_percpu(pool->recycle_stats); #endif return -ENOMEM; @@ -249,7 +264,7 @@ static int page_pool_init(struct page_pool *pool, /* Driver calling page_pool_create() also call page_pool_destroy() */ refcount_set(&pool->user_cnt, 1); - if (pool->p.flags & PP_FLAG_DMA_MAP) + if (pool->dma_map) get_device(pool->p.dev); return 0; @@ -259,11 +274,11 @@ static void page_pool_uninit(struct page_pool *pool) { ptr_ring_cleanup(&pool->ring, NULL); - if (pool->p.flags & PP_FLAG_DMA_MAP) + if (pool->dma_map) put_device(pool->p.dev); #ifdef CONFIG_PAGE_POOL_STATS - if (!(pool->p.flags & PP_FLAG_SYSTEM_POOL)) + if (!pool->system) free_percpu(pool->recycle_stats); #endif } @@ -384,16 +399,26 @@ static struct page *__page_pool_get_cached(struct page_pool *pool) return page; } -static void page_pool_dma_sync_for_device(const struct page_pool *pool, - const struct page *page, - unsigned int dma_sync_size) +static void __page_pool_dma_sync_for_device(const struct page_pool *pool, + const struct page *page, + u32 dma_sync_size) { +#if defined(CONFIG_HAS_DMA) && defined(CONFIG_DMA_NEED_SYNC) dma_addr_t dma_addr = page_pool_get_dma_addr(page); dma_sync_size = min(dma_sync_size, pool->p.max_len); - dma_sync_single_range_for_device(pool->p.dev, dma_addr, - pool->p.offset, dma_sync_size, - pool->p.dma_dir); + __dma_sync_single_for_device(pool->p.dev, dma_addr + pool->p.offset, + dma_sync_size, pool->p.dma_dir); +#endif +} + +static __always_inline void +page_pool_dma_sync_for_device(const struct page_pool *pool, + const struct page *page, + u32 dma_sync_size) +{ + if (pool->dma_sync && dma_dev_need_sync(pool->p.dev)) + __page_pool_dma_sync_for_device(pool, page, dma_sync_size); } static bool page_pool_dma_map(struct page_pool *pool, struct page *page) @@ -415,8 +440,7 @@ static bool page_pool_dma_map(struct page_pool *pool, struct page *page) if (page_pool_set_dma_addr(page, dma)) goto unmap_failed; - if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV) - page_pool_dma_sync_for_device(pool, page, pool->p.max_len); + page_pool_dma_sync_for_device(pool, page, pool->p.max_len); return true; @@ -461,8 +485,7 @@ static struct page *__page_pool_alloc_page_order(struct page_pool *pool, if (unlikely(!page)) return NULL; - if ((pool->p.flags & PP_FLAG_DMA_MAP) && - unlikely(!page_pool_dma_map(pool, page))) { + if (pool->dma_map && unlikely(!page_pool_dma_map(pool, page))) { put_page(page); return NULL; } @@ -482,8 +505,8 @@ static struct page *__page_pool_alloc_pages_slow(struct page_pool *pool, gfp_t gfp) { const int bulk = PP_ALLOC_CACHE_REFILL; - unsigned int pp_flags = pool->p.flags; unsigned int pp_order = pool->p.order; + bool dma_map = pool->dma_map; struct page *page; int i, nr_pages; @@ -508,8 +531,7 @@ static struct page *__page_pool_alloc_pages_slow(struct page_pool *pool, */ for (i = 0; i < nr_pages; i++) { page = pool->alloc.cache[i]; - if ((pp_flags & PP_FLAG_DMA_MAP) && - unlikely(!page_pool_dma_map(pool, page))) { + if (dma_map && unlikely(!page_pool_dma_map(pool, page))) { put_page(page); continue; } @@ -582,7 +604,7 @@ void __page_pool_release_page_dma(struct page_pool *pool, struct page *page) { dma_addr_t dma; - if (!(pool->p.flags & PP_FLAG_DMA_MAP)) + if (!pool->dma_map) /* Always account for inflight pages, even if we didn't * map them */ @@ -665,7 +687,7 @@ static bool __page_pool_page_can_be_recycled(const struct page *page) } /* If the page refcnt == 1, this will try to recycle the page. - * if PP_FLAG_DMA_SYNC_DEV is set, we'll try to sync the DMA area for + * If pool->dma_sync is set, we'll try to sync the DMA area for * the configured size min(dma_sync_size, pool->max_len). * If the page refcnt != 1, then the page will be returned to memory * subsystem. @@ -688,9 +710,7 @@ __page_pool_put_page(struct page_pool *pool, struct page *page, if (likely(__page_pool_page_can_be_recycled(page))) { /* Read barrier done in page_ref_count / READ_ONCE */ - if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV) - page_pool_dma_sync_for_device(pool, page, - dma_sync_size); + page_pool_dma_sync_for_device(pool, page, dma_sync_size); if (allow_direct && page_pool_recycle_in_cache(page, pool)) return NULL; @@ -829,9 +849,7 @@ static struct page *page_pool_drain_frag(struct page_pool *pool, return NULL; if (__page_pool_page_can_be_recycled(page)) { - if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV) - page_pool_dma_sync_for_device(pool, page, -1); - + page_pool_dma_sync_for_device(pool, page, -1); return page; } diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c index ce60ecd48a4d..c0e0204b9630 100644 --- a/net/xdp/xsk_buff_pool.c +++ b/net/xdp/xsk_buff_pool.c @@ -338,7 +338,6 @@ static struct xsk_dma_map *xp_create_dma_map(struct device *dev, struct net_devi dma_map->netdev = netdev; dma_map->dev = dev; - dma_map->dma_need_sync = false; dma_map->dma_pages_cnt = nr_pages; refcount_set(&dma_map->users, 1); list_add(&dma_map->list, &umem->xsk_dma_list); @@ -424,7 +423,6 @@ static int xp_init_dma_info(struct xsk_buff_pool *pool, struct xsk_dma_map *dma_ pool->dev = dma_map->dev; pool->dma_pages_cnt = dma_map->dma_pages_cnt; - pool->dma_need_sync = dma_map->dma_need_sync; memcpy(pool->dma_pages, dma_map->dma_pages, pool->dma_pages_cnt * sizeof(*pool->dma_pages)); @@ -460,8 +458,6 @@ int xp_dma_map(struct xsk_buff_pool *pool, struct device *dev, __xp_dma_unmap(dma_map, attrs); return -ENOMEM; } - if (dma_need_sync(dev, dma)) - dma_map->dma_need_sync = true; dma_map->dma_pages[i] = dma; } @@ -557,11 +553,9 @@ struct xdp_buff *xp_alloc(struct xsk_buff_pool *pool) xskb->xdp.data_meta = xskb->xdp.data; xskb->xdp.flags = 0; - if (pool->dma_need_sync) { - dma_sync_single_range_for_device(pool->dev, xskb->dma, 0, - pool->frame_len, - DMA_BIDIRECTIONAL); - } + if (pool->dev) + xp_dma_sync_for_device(pool, xskb->dma, pool->frame_len); + return &xskb->xdp; } EXPORT_SYMBOL(xp_alloc); @@ -633,7 +627,7 @@ u32 xp_alloc_batch(struct xsk_buff_pool *pool, struct xdp_buff **xdp, u32 max) { u32 nb_entries1 = 0, nb_entries2; - if (unlikely(pool->dma_need_sync)) { + if (unlikely(pool->dev && dma_dev_need_sync(pool->dev))) { struct xdp_buff *buff; /* Slow path */ @@ -693,18 +687,3 @@ dma_addr_t xp_raw_get_dma(struct xsk_buff_pool *pool, u64 addr) (addr & ~PAGE_MASK); } EXPORT_SYMBOL(xp_raw_get_dma); - -void xp_dma_sync_for_cpu_slow(struct xdp_buff_xsk *xskb) -{ - dma_sync_single_range_for_cpu(xskb->pool->dev, xskb->dma, 0, - xskb->pool->frame_len, DMA_BIDIRECTIONAL); -} -EXPORT_SYMBOL(xp_dma_sync_for_cpu_slow); - -void xp_dma_sync_for_device_slow(struct xsk_buff_pool *pool, dma_addr_t dma, - size_t size) -{ - dma_sync_single_range_for_device(pool->dev, dma, 0, - size, DMA_BIDIRECTIONAL); -} -EXPORT_SYMBOL(xp_dma_sync_for_device_slow); |