diff options
165 files changed, 313 insertions, 328 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index bf1627b02a03..aba7d989208c 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -43,7 +43,7 @@ Date: September 2008 Contact: Badari Pulavarty <pbadari@us.ibm.com> Description: The file /sys/devices/system/memory/memoryX/state - is read-write. When read, it's contents show the + is read-write. When read, its contents show the online/offline state of the memory section. When written, root can toggle the the online/offline state of a removable memory section (see removable file description above) diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt index 52618ab069ad..2e435adfbd6b 100644 --- a/Documentation/DMA-API-HOWTO.txt +++ b/Documentation/DMA-API-HOWTO.txt @@ -742,7 +742,7 @@ failure can be determined by: Closing -This document, and the API itself, would not be in it's current +This document, and the API itself, would not be in its current form without the feedback and suggestions from numerous individuals. We would like to specifically mention, in no particular order, the following people: diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ff3e5bec1c24..265c08c96fcd 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -477,7 +477,7 @@ void (*host_stop) (struct ata_host_set *host_set); allocates space for a legacy IDE PRD table and returns. </para> <para> - ->port_stop() is called after ->host_stop(). It's sole function + ->port_stop() is called after ->host_stop(). Its sole function is to release DMA/memory resources, now that they are no longer actively being used. Many drivers also free driver-private data from port at this time. diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index e83f2ea76415..898ded24510d 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -216,7 +216,7 @@ The driver should return one of the following result codes: - PCI_ERS_RESULT_NEED_RESET Driver returns this if it thinks the device is not - recoverable in it's current state and it needs a slot + recoverable in its current state and it needs a slot reset to proceed. - PCI_ERS_RESULT_DISCONNECT @@ -241,7 +241,7 @@ in working condition. The driver is not supposed to restart normal driver I/O operations at this point. It should limit itself to "probing" the device to -check it's recoverability status. If all is right, then the platform +check its recoverability status. If all is right, then the platform will call resume() once all drivers have ack'd link_reset(). Result codes: diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt index 34614b4c708e..e9dab41c0fe0 100644 --- a/Documentation/Smack.txt +++ b/Documentation/Smack.txt @@ -73,7 +73,7 @@ NOTE: Smack labels are limited to 23 characters. The attr command If you don't do anything special all users will get the floor ("_") label when they log in. If you do want to log in via the hacked ssh at other labels use the attr command to set the smack value on the -home directory and it's contents. +home directory and its contents. You can add access rules in /etc/smack/accesses. They take the form: diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy index 7197a9e958ee..f9f62e8c0719 100644 --- a/Documentation/arm/SA1100/ADSBitsy +++ b/Documentation/arm/SA1100/ADSBitsy @@ -32,7 +32,7 @@ Notes: - The flash on board is divided into 3 partitions. You should be careful to use flash on board. - It's partition is different from GraphicsClient Plus and GraphicsMaster + Its partition is different from GraphicsClient Plus and GraphicsMaster - 16bpp mode requires a different cable than what ships with the board. Contact ADS or look through the manual to wire your own. Currently, diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen index 1e6a23fdf2fc..dc460f055647 100644 --- a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen +++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen @@ -7,7 +7,7 @@ The driver only implements a four-wire touch panel protocol. The touchscreen driver is maintenance free except for the pen-down or touch threshold. Some resistive displays and board combinations may -require tuning of this threshold. The driver exposes some of it's +require tuning of this threshold. The driver exposes some of its internal state in the sys filesystem. If the kernel is configured with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a directory diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index 396bec3b74ed..ac4d47187122 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -320,7 +320,7 @@ counter decrement would not become globally visible until the obj->active update does. As a historical note, 32-bit Sparc used to only allow usage of -24-bits of it's atomic_t type. This was because it used 8 bits +24-bits of its atomic_t type. This was because it used 8 bits as a spinlock for SMP safety. Sparc32 lacked a "compare and swap" type instruction. However, 32-bit Sparc has since been moved over to a "hash table of spinlocks" scheme, that allows the full 32-bit diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt index 9898c7ded7d3..f731c1e56475 100644 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -43,7 +43,7 @@ void bfin_gpio_irq_free(unsigned gpio); The request functions will record the function state for a certain pin, - the free functions will clear it's function state. + the free functions will clear its function state. Once a pin is requested, it can't be requested again before it is freed by previous caller, otherwise kernel will dump stacks, and the request function fail. diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index 2b5f823abd03..9164ae3b83bc 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -5,7 +5,7 @@ This document describes the cache/tlb flushing interfaces called by the Linux VM subsystem. It enumerates over each interface, -describes it's intended purpose, and what side effect is expected +describes its intended purpose, and what side effect is expected after the interface is invoked. The side effects described below are stated for a uniprocessor @@ -231,7 +231,7 @@ require a whole different set of interfaces to handle properly. The biggest problem is that of virtual aliasing in the data cache of a processor. -Is your port susceptible to virtual aliasing in it's D-cache? +Is your port susceptible to virtual aliasing in its D-cache? Well, if your D-cache is virtually indexed, is larger in size than PAGE_SIZE, and does not prevent multiple cache lines for the same physical address from existing at once, you have this problem. @@ -249,7 +249,7 @@ one way to solve this (in particular SPARC_FLAG_MMAPSHARED). Next, you have to solve the D-cache aliasing issue for all other cases. Please keep in mind that fact that, for a given page mapped into some user address space, there is always at least one more -mapping, that of the kernel in it's linear mapping starting at +mapping, that of the kernel in its linear mapping starting at PAGE_OFFSET. So immediately, once the first user maps a given physical page into its address space, by implication the D-cache aliasing problem has the potential to exist since the kernel already diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index a1ca5924faff..57444c2609fc 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -572,7 +572,7 @@ void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, Called when a task attach operation has failed after can_attach() has succeeded. A subsystem whose can_attach() has some side-effects should provide this -function, so that the subsytem can implement a rollback. If not, not necessary. +function, so that the subsystem can implement a rollback. If not, not necessary. This will be called only about subsystems whose can_attach() operation have succeeded. diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 4160df82b3f5..51682ab2dd1a 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -42,7 +42,7 @@ Nodes to a set of tasks. In this document "Memory Node" refers to an on-line node that contains memory. Cpusets constrain the CPU and Memory placement of tasks to only -the resources within a tasks current cpuset. They form a nested +the resources within a task's current cpuset. They form a nested hierarchy visible in a virtual file system. These are the essential hooks, beyond what is already present, required to manage dynamic job placement on large systems. @@ -53,11 +53,11 @@ Documentation/cgroups/cgroups.txt. Requests by a task, using the sched_setaffinity(2) system call to include CPUs in its CPU affinity mask, and using the mbind(2) and set_mempolicy(2) system calls to include Memory Nodes in its memory -policy, are both filtered through that tasks cpuset, filtering out any +policy, are both filtered through that task's cpuset, filtering out any CPUs or Memory Nodes not in that cpuset. The scheduler will not schedule a task on a CPU that is not allowed in its cpus_allowed vector, and the kernel page allocator will not allocate a page on a -node that is not allowed in the requesting tasks mems_allowed vector. +node that is not allowed in the requesting task's mems_allowed vector. User level code may create and destroy cpusets by name in the cgroup virtual file system, manage the attributes and permissions of these @@ -121,9 +121,9 @@ Cpusets extends these two mechanisms as follows: - Each task in the system is attached to a cpuset, via a pointer in the task structure to a reference counted cgroup structure. - Calls to sched_setaffinity are filtered to just those CPUs - allowed in that tasks cpuset. + allowed in that task's cpuset. - Calls to mbind and set_mempolicy are filtered to just - those Memory Nodes allowed in that tasks cpuset. + those Memory Nodes allowed in that task's cpuset. - The root cpuset contains all the systems CPUs and Memory Nodes. - For any cpuset, one can define child cpusets containing a subset @@ -141,11 +141,11 @@ into the rest of the kernel, none in performance critical paths: - in init/main.c, to initialize the root cpuset at system boot. - in fork and exit, to attach and detach a task from its cpuset. - in sched_setaffinity, to mask the requested CPUs by what's - allowed in that tasks cpuset. + allowed in that task's cpuset. - in sched.c migrate_live_tasks(), to keep migrating tasks within the CPUs allowed by their cpuset, if possible. - in the mbind and set_mempolicy system calls, to mask the requested - Memory Nodes by what's allowed in that tasks cpuset. + Memory Nodes by what's allowed in that task's cpuset. - in page_alloc.c, to restrict memory to allowed nodes. - in vmscan.c, to restrict page recovery to the current cpuset. @@ -155,7 +155,7 @@ new system calls are added for cpusets - all support for querying and modifying cpusets is via this cpuset file system. The /proc/<pid>/status file for each task has four added lines, -displaying the tasks cpus_allowed (on which CPUs it may be scheduled) +displaying the task's cpus_allowed (on which CPUs it may be scheduled) and mems_allowed (on which Memory Nodes it may obtain memory), in the two formats seen in the following example: @@ -323,17 +323,17 @@ stack segment pages of a task. By default, both kinds of memory spreading are off, and memory pages are allocated on the node local to where the task is running, -except perhaps as modified by the tasks NUMA mempolicy or cpuset +except perhaps as modified by the task's NUMA mempolicy or cpuset configuration, so long as sufficient free memory pages are available. When new cpusets are created, they inherit the memory spread settings of their parent. Setting memory spreading causes allocations for the affected page -or slab caches to ignore the tasks NUMA mempolicy and be spread +or slab caches to ignore the task's NUMA mempolicy and be spread instead. Tasks using mbind() or set_mempolicy() calls to set NUMA mempolicies will not notice any change in these calls as a result of -their containing tasks memory spread settings. If memory spreading +their containing task's memory spread settings. If memory spreading is turned off, then the currently specified NUMA mempolicy once again applies to memory page allocations. @@ -357,7 +357,7 @@ pages from the node returned by cpuset_mem_spread_node(). The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next -node in the current tasks mems_allowed to prefer for the allocation. +node in the current task's mems_allowed to prefer for the allocation. This memory placement policy is also known (in other contexts) as round-robin or interleave. @@ -594,7 +594,7 @@ is attached, is subtle. If a cpuset has its Memory Nodes modified, then for each task attached to that cpuset, the next time that the kernel attempts to allocate a page of memory for that task, the kernel will notice the change -in the tasks cpuset, and update its per-task memory placement to +in the task's cpuset, and update its per-task memory placement to remain within the new cpusets memory placement. If the task was using mempolicy MPOL_BIND, and the nodes to which it was bound overlap with its new cpuset, then the task will continue to use whatever subset @@ -603,13 +603,13 @@ was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed in the new cpuset, then the task will be essentially treated as if it was MPOL_BIND bound to the new cpuset (even though its NUMA placement, as queried by get_mempolicy(), doesn't change). If a task is moved -from one cpuset to another, then the kernel will adjust the tasks +from one cpuset to another, then the kernel will adjust the task's memory placement, as above, the next time that the kernel attempts to allocate a page of memory for that task. If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset will have its allowed CPU placement changed immediately. Similarly, -if a tasks pid is written to another cpusets 'cpuset.tasks' file, then its +if a task's pid is written to another cpusets 'cpuset.tasks' file, then its allowed CPU placement is changed immediately. If such a task had been bound to some subset of its cpuset using the sched_setaffinity() call, the task will be allowed to run on any CPU allowed in its new cpuset, @@ -626,16 +626,16 @@ cpusets memory placement policy 'cpuset.mems' subsequently changes. If the cpuset flag file 'cpuset.memory_migrate' is set true, then when tasks are attached to that cpuset, any pages that task had allocated to it on nodes in its previous cpuset are migrated -to the tasks new cpuset. The relative placement of the page within +to the task's new cpuset. The relative placement of the page within the cpuset is preserved during these migration operations if possible. For example if the page was on the second valid node of the prior cpuset then the page will be placed on the second valid node of the new cpuset. -Also if 'cpuset.memory_migrate' is set true, then if that cpusets +Also if 'cpuset.memory_migrate' is set true, then if that cpuset's 'cpuset.mems' file is modified, pages allocated to tasks in that cpuset, that were on nodes in the previous setting of 'cpuset.mems', will be moved to nodes in the new setting of 'mems.' -Pages that were not in the tasks prior cpuset, or in the cpusets +Pages that were not in the task's prior cpuset, or in the cpuset's prior 'cpuset.mems' setting, will not be moved. There is an exception to the above. If hotplug functionality is used @@ -655,7 +655,7 @@ There is a second exception to the above. GFP_ATOMIC requests are kernel internal allocations that must be satisfied, immediately. The kernel may drop some request, in rare cases even panic, if a GFP_ATOMIC alloc fails. If the request cannot be satisfied within -the current tasks cpuset, then we relax the cpuset, and look for +the current task's cpuset, then we relax the cpuset, and look for memory anywhere we can find it. It's better to violate the cpuset than stress the kernel. diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index f7f68b2ac199..b7eececfb195 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -244,7 +244,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. we have to check if OLDPAGE/NEWPAGE is a valid page after commit(). 8. LRU - Each memcg has its own private LRU. Now, it's handling is under global + Each memcg has its own private LRU. Now, its handling is under global VM's control (means that it's handled under global zone->lru_lock). Almost all routines around memcg's LRU is called by global LRU's list management functions under zone->lru_lock(). diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 3a6aecd078ba..6cab1f29da4c 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -263,7 +263,7 @@ some of the pages cached in the cgroup (page cache pages). 4.2 Task migration -When a task migrates from one cgroup to another, it's charge is not +When a task migrates from one cgroup to another, its charge is not carried forward by default. The pages allocated from the original cgroup still remain charged to it, the charge is dropped when the page is freed or reclaimed. diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index 78c9466a9aa8..e5c5f5e6ab70 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -88,7 +88,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); int gfp_mask - GFP mask. Note: When registering new callback user, connector core assigns - netlink group to the user which is equal to it's id.idx. + netlink group to the user which is equal to its id.idx. /*****************************************/ Protocol description. diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt index 2ecd834585e6..4a0c2b56e690 100644 --- a/Documentation/dvb/ci.txt +++ b/Documentation/dvb/ci.txt @@ -41,7 +41,7 @@ This application requires the following to function properly as of now. * Cards that fall in this category ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -At present the cards that fall in this category are the Twinhan and it's +At present the cards that fall in this category are the Twinhan and its clones, these cards are available as VVMER, Tomato, Hercules, Orange and so on. diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index 4865addebe1c..47c30098dab6 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -1,7 +1,7 @@ Thanks go to the following people for patches and contributions: Michael Hunold <m.hunold@gmx.de> - for the initial saa7146 driver and it's recent overhaul + for the initial saa7146 driver and its recent overhaul Christian Theiss for his work on the initial Linux DVB driver diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 06bbbed71206..af1608070cd5 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -178,7 +178,7 @@ prototypes: locking rules: All except set_page_dirty may block - BKL PageLocked(page) i_sem + BKL PageLocked(page) i_mutex writepage: no yes, unlocks (see below) readpage: no yes, unlocks sync_page: no maybe @@ -429,7 +429,7 @@ check_flags: no implementations. If your fs is not using generic_file_llseek, you need to acquire and release the appropriate locks in your ->llseek(). For many filesystems, it is probably safe to acquire the inode -semaphore. Note some filesystems (i.e. remote ones) provide no +mutex. Note some filesystems (i.e. remote ones) provide no protection for i_size so you will need to use the BKL. Note: ext2_release() was *the* source of contention on fs-intensive diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index 8f78ded4b648..51986bf08a4d 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -146,7 +146,7 @@ found to be inadequate, in this case. The Generic Netlink system was used for this as raw Netlink would lead to a significant increase in complexity. There's no question that the Generic Netlink system is an elegant solution for common case ioctl functions but it's not a complete -replacement probably because it's primary purpose in life is to be a +replacement probably because its primary purpose in life is to be a message bus implementation rather than specifically an ioctl replacement. While it would be possible to work around this there is one concern that lead to the decision to not use it. This is that the autofs diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt index 0660c9f5deef..763d8ebbbebd 100644 --- a/Documentation/filesystems/ceph.txt +++ b/Documentation/filesystems/ceph.txt @@ -90,7 +90,7 @@ Mount Options Specify the IP and/or port the client should bind to locally. There is normally not much reason to do this. If the IP is not specified, the client's IP address is determined by looking at the - address it's connection to the monitor originates from. + address its connection to the monitor originates from. wsize=X Specify the maximum write size in bytes. By default there is no diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index c50bbb2d52b4..1b528b2ad809 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -47,7 +47,7 @@ You'll want to start heartbeating on a volume which all the nodes in your lockspace can access. The easiest way to do this is via ocfs2_hb_ctl (distributed with ocfs2-tools). Right now it requires that an OCFS2 file system be in place so that it can automatically -find it's heartbeat area, though it will eventually support heartbeat +find its heartbeat area, though it will eventually support heartbeat against raw disks. Please see the ocfs2_hb_ctl and mkfs.ocfs2 manual pages distributed diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt index 606233cd4618..1b805a0efbb0 100644 --- a/Documentation/filesystems/fiemap.txt +++ b/Documentation/filesystems/fiemap.txt @@ -38,7 +38,7 @@ flags, it will return EBADR and the contents of fm_flags will contain the set of flags which caused the error. If the kernel is compatible with all flags passed, the contents of fm_flags will be unmodified. It is up to userspace to determine whether rejection of a particular -flag is fatal to it's operation. This scheme is intended to allow the +flag is fatal to its operation. This scheme is intended to allow the fiemap interface to grow in the future but without losing compatibility with old software. @@ -56,7 +56,7 @@ If this flag is set, the kernel will sync the file before mapping extents. * FIEMAP_FLAG_XATTR If this flag is set, the extents returned will describe the inodes -extended attribute lookup tree, instead of it's data tree. +extended attribute lookup tree, instead of its data tree. Extent Mapping @@ -89,7 +89,7 @@ struct fiemap_extent { }; All offsets and lengths are in bytes and mirror those on disk. It is valid -for an extents logical offset to start before the request or it's logical +for an extents logical offset to start before the request or its logical length to extend past the request. Unless FIEMAP_EXTENT_NOT_ALIGNED is returned, fe_logical, fe_physical, and fe_length will be aligned to the block size of the file system. With the exception of extents flagged as @@ -125,7 +125,7 @@ been allocated for the file yet. * FIEMAP_EXTENT_DELALLOC - This will also set FIEMAP_EXTENT_UNKNOWN. -Delayed allocation - while there is data for this extent, it's +Delayed allocation - while there is data for this extent, its physical location has not been allocated yet. * FIEMAP_EXTENT_ENCODED @@ -159,7 +159,7 @@ Data is located within a meta data block. Data is packed into a block with data from other files. * FIEMAP_EXTENT_UNWRITTEN -Unwritten extent - the extent is allocated but it's data has not been +Unwritten extent - the extent is allocated but its data has not been initialized. This indicates the extent's data will be all zero if read through the filesystem but the contents are undefined if read directly from the device. @@ -176,7 +176,7 @@ VFS -> File System Implementation File systems wishing to support fiemap must implement a ->fiemap callback on their inode_operations structure. The fs ->fiemap call is responsible for -defining it's set of supported fiemap flags, and calling a helper function on +defining its set of supported fiemap flags, and calling a helper function on each discovered extent: struct inode_operations { diff --git a/Documentation/filesystems/fuse.txt b/Documentation/filesystems/fuse.txt index 397a41adb4c3..13af4a49e7db 100644 --- a/Documentation/filesystems/fuse.txt +++ b/Documentation/filesystems/fuse.txt @@ -91,7 +91,7 @@ Mount options 'default_permissions' By default FUSE doesn't check file access permissions, the - filesystem is free to implement it's access policy or leave it to + filesystem is free to implement its access policy or leave it to the underlying file access mechanism (e.g. in case of network filesystems). This option enables permission checking, restricting access based on file mode. It is usually useful together with the @@ -171,7 +171,7 @@ or may honor them by sending a reply to the _original_ request, with the error set to EINTR. It is also possible that there's a race between processing the -original request and it's INTERRUPT request. There are two possibilities: +original request and its INTERRUPT request. There are two possibilities: 1) The INTERRUPT request is processed before the original request is processed diff --git a/Documentation/filesystems/hpfs.txt b/Documentation/filesystems/hpfs.txt index fa45c3baed98..74630bd504fb 100644 --- a/Documentation/filesystems/hpfs.txt +++ b/Documentation/filesystems/hpfs.txt @@ -103,7 +103,7 @@ to analyze or change OS2SYS.INI. Codepages HPFS can contain several uppercasing tables for several codepages and each -file has a pointer to codepage it's name is in. However OS/2 was created in +file has a pointer to codepage its name is in. However OS/2 was created in America where people don't care much about codepages and so multiple codepages support is quite buggy. I have Czech OS/2 working in codepage 852 on my disk. Once I booted English OS/2 working in cp 850 and I created a file on my 852 diff --git a/Documentation/filesystems/logfs.txt b/Documentation/filesystems/logfs.txt index e64c94ba401a..bca42c22a143 100644 --- a/Documentation/filesystems/logfs.txt +++ b/Documentation/filesystems/logfs.txt @@ -59,7 +59,7 @@ Levels ------ Garbage collection (GC) may fail if all data is written -indiscriminately. One requirement of GC is that data is seperated +indiscriminately. One requirement of GC is that data is separated roughly according to the distance between the tree root and the data. Effectively that means all file data is on level 0, indirect blocks are on levels 1, 2, 3 4 or 5 for 1x, 2x, 3x, 4x or 5x indirect blocks, @@ -67,7 +67,7 @@ respectively. Inode file data is on level 6 for the inodes and 7-11 for indirect blocks. Each segment contains objects of a single level only. As a result, -each level requires its own seperate segment to be open for writing. +each level requires its own separate segment to be open for writing. Inode File ---------- @@ -106,9 +106,9 @@ Vim --- By cleverly predicting the life time of data, it is possible to -seperate long-living data from short-living data and thereby reduce +separate long-living data from short-living data and thereby reduce the GC overhead later. Each type of distinc life expectency (vim) can -have a seperate segment open for writing. Each (level, vim) tupel can +have a separate segment open for writing. Each (level, vim) tupel can be open just once. If an open segment with unknown vim is encountered at mount time, it is closed and ignored henceforth. diff --git a/Documentation/filesystems/nfs/rpc-cache.txt b/Documentation/filesystems/nfs/rpc-cache.txt index 8a382bea6808..ebcaaee21616 100644 --- a/Documentation/filesystems/nfs/rpc-cache.txt +++ b/Documentation/filesystems/nfs/rpc-cache.txt @@ -185,7 +185,7 @@ failed lookup meant a definite 'no'. request/response format ----------------------- -While each cache is free to use it's own format for requests +While each cache is free to use its own format for requests and responses over channel, the following is recommended as appropriate and support routines are available to help: Each request or response record should be printable ASCII diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fbce915c9181..9fb6cbe70bde 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -305,7 +305,7 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7) cgtime guest time of the task children in jiffies .............................................................................. -The /proc/PID/map file containing the currently mapped memory regions and +The /proc/PID/maps file containing the currently mapped memory regions and their access permissions. The format is: @@ -968,7 +968,7 @@ your system and how much traffic was routed over those devices: ...] 1375103 17405 0 0 0 0 0 0 ...] 1703981 5535 0 0 0 3 0 0 -In addition, each Channel Bond interface has it's own directory. For +In addition, each Channel Bond interface has its own directory. For example, the bond0 device will have a directory called /proc/net/bond0/. It will contain information that is specific to that bond, such as the current slaves of the bond, the link status of the slaves, and how @@ -1365,7 +1365,7 @@ been accounted as having caused 1MB of write. In other words: The number of bytes which this process caused to not happen, by truncating pagecache. A task can cause "negative" IO too. If this task truncates some dirty pagecache, some IO which another task has been accounted -for (in it's write_bytes) will not be happening. We _could_ just subtract that +for (in its write_bytes) will not be happening. We _could_ just subtract that from the truncating task's write_bytes, but there is information loss in doing that. diff --git a/Documentation/filesystems/smbfs.txt b/Documentation/filesystems/smbfs.txt index f673ef0de0f7..194fb0decd2c 100644 --- a/Documentation/filesystems/smbfs.txt +++ b/Documentation/filesystems/smbfs.txt @@ -3,6 +3,6 @@ protocol used by Windows for Workgroups, Windows 95 and Windows NT. Smbfs was inspired by Samba, the program written by Andrew Tridgell that turns any Unix host into a file server for DOS or Windows clients. -Smbfs is a SMB client, but uses parts of samba for it's operation. For +Smbfs is a SMB client, but uses parts of samba for its operation. For more info on samba, including documentation, please go to http://www.samba.org/ and then on to your nearest mirror. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 3de2f32edd90..b66858538df5 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -72,7 +72,7 @@ structure (this is the kernel-side implementation of file descriptors). The freshly allocated file structure is initialized with a pointer to the dentry and a set of file operation member functions. These are taken from the inode data. The open() file method is then -called so the specific filesystem implementation can do it's work. You +called so the specific filesystem implementation can do its work. You can see that this is another switch performed by the VFS. The file structure is placed into the file descriptor table for the process. diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index a13680871bc7..a76aefeeb68a 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -157,7 +157,7 @@ temperature configuration points: There are three PWM outputs. The LM85 datasheet suggests that the pwm3 output control both fan3 and fan4. Each PWM can be individually -configured and assigned to a zone for it's control value. Each PWM can be +configured and assigned to a zone for its control value. Each PWM can be configured individually according to the following options. * pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index 154d767b2acb..8007b7ca87bf 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -402,7 +402,7 @@ for the port of the SoundFusion is supported by the cs461x.c module. ~~~~~~~~~~~~~~~~~~~~~~~~ The Live! has a special PCI gameport, which, although it doesn't provide any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than -it's ISA counterparts. It also requires special support, hence the +its ISA counterparts. It also requires special support, hence the emu10k1-gp.c module for it instead of the normal ns558.c one. 3.15 SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt index 87c8990dbbd9..5dc59b04a71f 100644 --- a/Documentation/intel_txt.txt +++ b/Documentation/intel_txt.txt @@ -126,7 +126,7 @@ o Tboot then applies an (optional) user-defined launch policy to o Tboot adjusts the e820 table provided by the bootloader to reserve its own location in memory as well as to reserve certain other TXT-related regions. -o As part of it's launch, tboot DMA protects all of RAM (using the +o As part of its launch, tboot DMA protects all of RAM (using the VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on' in order to remove this blanket protection and use VT-d's page-level protection. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index c412c245848f..b472e4e0ba67 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -181,7 +181,7 @@ Expressions are listed in decreasing order of precedence. (7) Returns the result of max(/expr/, /expr/). An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2 -respectively for calculations). A menu entry becomes visible when it's +respectively for calculations). A menu entry becomes visible when its expression evaluates to 'm' or 'y'. There are two types of symbols: constant and non-constant symbols. diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 49efae703979..b2cb16ebcb16 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -96,7 +96,7 @@ Environment variables for 'silentoldconfig' KCONFIG_NOSILENTUPDATE -------------------------------------------------- If this variable has a non-blank value, it prevents silent kernel -config udpates (requires explicit updates). +config updates (requires explicit updates). KCONFIG_AUTOCONFIG -------------------------------------------------- diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 28cdc2af2131..ec8d31ee12e0 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -116,7 +116,7 @@ Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza. URL: http://www.linuxjournal.com/article.php?sid=2391 Keywords: RAID, MD driver. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "A description of the implementation of the RAID-1, RAID-4 and RAID-5 personalities of the MD device driver in the Linux kernel, providing users with high performance and reliable, @@ -127,7 +127,7 @@ URL: http://www.linuxjournal.com/article.php?sid=1219 Keywords: device driver, module, loading/unloading modules, allocating resources. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This is the first of a series of four articles co-authored by Alessandro Rubini and Georg Zezchwitz which present a practical approach to writing Linux device drivers as kernel @@ -141,7 +141,7 @@ Keywords: character driver, init_module, clean_up module, autodetection, mayor number, minor number, file operations, open(), close(). - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This article, the second of four, introduces part of the actual code to create custom module implementing a character device driver. It describes the code for module initialization and @@ -152,7 +152,7 @@ URL: http://www.linuxjournal.com/article.php?sid=1221 Keywords: read(), write(), select(), ioctl(), blocking/non blocking mode, interrupt handler. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This article, the third of four on writing character device drivers, introduces concepts of reading, writing, and using ioctl-calls". @@ -161,7 +161,7 @@ Author: Alessandro Rubini and Georg v. Zezschwitz. URL: http://www.linuxjournal.com/article.php?sid=1222 Keywords: interrupts, irqs, DMA, bottom halves, task queues. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This is the fourth in a series of articles about writing character device drivers as loadable kernel modules. This month, we further investigate the field of interrupt handling. diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 61c291cddf18..6653017680dd 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -326,7 +326,7 @@ occurs during execution of kp->pre_handler or kp->post_handler, or during single-stepping of the probed instruction, Kprobes calls kp->fault_handler. Any or all handlers can be NULL. If kp->flags is set KPROBE_FLAG_DISABLED, that kp will be registered but disabled, -so, it's handlers aren't hit until calling enable_kprobe(kp). +so, its handlers aren't hit until calling enable_kprobe(kp). NOTE: 1. With the introduction of the "symbol_name" field to struct kprobe, diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt index 2c3c35093023..0bf25eebce94 100644 --- a/Documentation/laptops/laptop-mode.txt +++ b/Documentation/laptops/laptop-mode.txt @@ -207,7 +207,7 @@ Tips & Tricks * Drew Scott Daniels observed: "I don't know why, but when I decrease the number of colours that my display uses it consumes less battery power. I've seen this on powerbooks too. I hope that this is a piece of information that - might be useful to the Laptop Mode patch or it's users." + might be useful to the Laptop Mode patch or its users." * In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the file after every logging. When you're using laptop-mode and your disk doesn't diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 3119f5db75bd..e9ce3c554514 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -263,7 +263,7 @@ static u8 *get_feature_bits(struct device *dev) * Launcher virtual with an offset. * * This can be tough to get your head around, but usually it just means that we - * use these trivial conversion functions when the Guest gives us it's + * use these trivial conversion functions when the Guest gives us its * "physical" addresses: */ static void *from_guest_phys(unsigned long addr) diff --git a/Documentation/md.txt b/Documentation/md.txt index 188f4768f1d5..e4e893ef3e01 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -136,7 +136,7 @@ raid_disks != 0. Then uninitialized devices can be added with ADD_NEW_DISK. The structure passed to ADD_NEW_DISK must specify the state of the device -and it's role in the array. +and its role in the array. Once started with RUN_ARRAY, uninitialized spares can be added with HOT_ADD_DISK. diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.txt index 98dd9f7430f2..638c74f7de7f 100644 --- a/Documentation/netlabel/lsm_interface.txt +++ b/Documentation/netlabel/lsm_interface.txt @@ -38,7 +38,7 @@ Depending on the exact configuration, translation between the network packet label and the internal LSM security identifier can be time consuming. The NetLabel label mapping cache is a caching mechanism which can be used to sidestep much of this overhead once a mapping has been established. Once the -LSM has received a packet, used NetLabel to decode it's security attributes, +LSM has received a packet, used NetLabel to decode its security attributes, and translated the security attributes into a LSM internal identifier the LSM can use the NetLabel caching functions to associate the LSM internal identifier with the network packet's label. This means that in the future diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c index 1b96ccda3836..2bac9618c345 100644 --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -756,7 +756,7 @@ static int enslave(char *master_ifname, char *slave_ifname) */ if (abi_ver < 1) { /* For old ABI, the master needs to be - * down before setting it's hwaddr + * down before setting its hwaddr */ res = set_if_down(master_ifname, master_flags.ifr_flags); if (res) { diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 09ab0d290326..98f71a5cef00 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -100,7 +100,7 @@ by the kernel. The destruction of the socket and all associated resources is done by a simple call to close(fd). -Next I will describe PACKET_MMAP settings and it's constraints, +Next I will describe PACKET_MMAP settings and its constraints, also the mapping of the circular buffer in the user process and the use of this buffer. @@ -432,7 +432,7 @@ TP_STATUS_LOSING : indicates there were packet drops from last time the PACKET_STATISTICS option. TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which - it's checksum will be done in hardware. So while + its checksum will be done in hardware. So while reading the packet we should not try to check the checksum. diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index cdebb5145c25..55c4175d8099 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -8,11 +8,11 @@ Please see overview.txt for a description of the terms used in this text. 1. Consumer Regulator Access (static & dynamic drivers) ======================================================= -A consumer driver can get access to it's supply regulator by calling :- +A consumer driver can get access to its supply regulator by calling :- regulator = regulator_get(dev, "Vcc"); -The consumer passes in it's struct device pointer and power supply ID. The core +The consumer passes in its struct device pointer and power supply ID. The core then finds the correct regulator by consulting a machine specific lookup table. If the lookup is successful then this call will return a pointer to the struct regulator that supplies this consumer. @@ -34,7 +34,7 @@ usually be called in your device drivers probe() and remove() respectively. 2. Regulator Output Enable & Disable (static & dynamic drivers) ==================================================================== -A consumer can enable it's power supply by calling:- +A consumer can enable its power supply by calling:- int regulator_enable(regulator); @@ -49,7 +49,7 @@ int regulator_is_enabled(regulator); This will return > zero when the regulator is enabled. -A consumer can disable it's supply when no longer needed by calling :- +A consumer can disable its supply when no longer needed by calling :- int regulator_disable(regulator); @@ -140,7 +140,7 @@ by calling :- int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); This will cause the core to recalculate the total load on the regulator (based -on all it's consumers) and change operating mode (if necessary and permitted) +on all its consumers) and change operating mode (if necessary and permitted) to best match the current operating load. The load_uA value can be determined from the consumers datasheet. e.g.most diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index 63728fed620b..bdec39b9bd75 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -52,7 +52,7 @@ static struct regulator_init_data regulator1_data = { }; Regulator-1 supplies power to Regulator-2. This relationship must be registered -with the core so that Regulator-1 is also enabled when Consumer A enables it's +with the core so that Regulator-1 is also enabled when Consumer A enables its supply (Regulator-2). The supply regulator is set by the supply_regulator_dev field below:- diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index ffd185bb6054..9363e056188a 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -35,16 +35,16 @@ Some terms used in this document:- o Consumer - Electronic device that is supplied power by a regulator. Consumers can be classified into two types:- - Static: consumer does not change it's supply voltage or + Static: consumer does not change its supply voltage or current limit. It only needs to enable or disable it's - power supply. It's supply voltage is set by the hardware, + power supply. Its supply voltage is set by the hardware, bootloader, firmware or kernel board initialisation code. Dynamic: consumer needs to change it's supply voltage or current limit to meet operation demands. - o Power Domain - Electronic circuit that is supplied it's input power by the + o Power Domain - Electronic circuit that is supplied its input power by the output power of a regulator, switch or by another power domain. diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 79f533f38c61..46d22105aa07 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1289,7 +1289,7 @@ link between a device node and its interrupt parent in the interrupt tree. The value of interrupt-parent is the phandle of the parent node. -If the interrupt-parent property is not defined for a node, it's +If the interrupt-parent property is not defined for a node, its interrupt parent is assumed to be an ancestor in the node's _device tree_ hierarchy. diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt index ea68046bb9cb..299d0923537b 100644 --- a/Documentation/powerpc/dts-bindings/xilinx.txt +++ b/Documentation/powerpc/dts-bindings/xilinx.txt @@ -11,7 +11,7 @@ control how the core is synthesized. Historically, the EDK tool would extract the device parameters relevant to device drivers and copy them into an 'xparameters.h' in the form of #define symbols. This tells the - device drivers how the IP cores are configured, but it requres the kernel + device drivers how the IP cores are configured, but it requires the kernel to be recompiled every time the FPGA bitstream is resynthesized. The new approach is to export the parameters into the device tree and diff --git a/Documentation/powerpc/phyp-assisted-dump.txt b/Documentation/powerpc/phyp-assisted-dump.txt index c4682b982a2e..ad340205d96a 100644 --- a/Documentation/powerpc/phyp-assisted-dump.txt +++ b/Documentation/powerpc/phyp-assisted-dump.txt @@ -19,7 +19,7 @@ dump offers several strong, practical advantages: immediately available to the system for normal use. -- After the dump is completed, no further reboots are required; the system will be fully usable, and running - in it's normal, production mode on it normal kernel. + in its normal, production mode on its normal kernel. The above can only be accomplished by coordination with, and assistance from the hypervisor. The procedure is diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt index 4b736d24da7a..8df0b782c4d7 100644 --- a/Documentation/rt-mutex-design.txt +++ b/Documentation/rt-mutex-design.txt @@ -657,7 +657,7 @@ here. The waiter structure has a "task" field that points to the task that is blocked on the mutex. This field can be NULL the first time it goes through the loop -or if the task is a pending owner and had it's mutex stolen. If the "task" +or if the task is a pending owner and had its mutex stolen. If the "task" field is NULL then we need to set up the accounting for it. Task blocks on mutex diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index 2ffc1148eb95..e759e92e286d 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -707,7 +707,7 @@ Changes from 20040920 to 20041018 * Integrate patches from Christoph Hellwig: two new helpers common to lpfc_sli_resume_iocb and lpfc_sli_issue_iocb - singificant cleanup of those two functions - the unused SLI_IOCB_USE_TXQ is - gone - lpfc_sli_issue_iocb_wait loses it's flags argument + gone - lpfc_sli_issue_iocb_wait loses its flags argument totally. * Fix in lpfc_sli.c: we can not store a 5 bit value in a 4-bit field. @@ -1028,7 +1028,7 @@ Changes from 20040614 to 20040709 * Remove the need for buf_tmo. * Changed ULP_BDE64 to struct ulp_bde64. * Changed ULP_BDE to struct ulp_bde. - * Cleanup lpfc_os_return_scsi_cmd() and it's call path. + * Cleanup lpfc_os_return_scsi_cmd() and its call path. * Removed lpfc_no_device_delay. * Consolidating lpfc_hba_put_event() into lpfc_put_event(). * Removed following attributes and their functionality: diff --git a/Documentation/scsi/FlashPoint.txt b/Documentation/scsi/FlashPoint.txt index d5acaa300a46..1540a92f6d2b 100644 --- a/Documentation/scsi/FlashPoint.txt +++ b/Documentation/scsi/FlashPoint.txt @@ -71,7 +71,7 @@ peters@mylex.com Ever since its introduction last October, the BusLogic FlashPoint LT has been problematic for members of the Linux community, in that no Linux -drivers have been available for this new Ultra SCSI product. Despite it's +drivers have been available for this new Ultra SCSI product. Despite its officially being positioned as a desktop workstation product, and not being particularly well suited for a high performance multitasking operating system like Linux, the FlashPoint LT has been touted by computer system diff --git a/Documentation/scsi/dtc3x80.txt b/Documentation/scsi/dtc3x80.txt index e8ae6230ab3e..1d7af9f9a8ed 100644 --- a/Documentation/scsi/dtc3x80.txt +++ b/Documentation/scsi/dtc3x80.txt @@ -12,7 +12,7 @@ The 3180 does not. Otherwise, they are identical. The DTC3x80 does not support DMA but it does have Pseudo-DMA which is supported by the driver. -It's DTC406 scsi chip is supposedly compatible with the NCR 53C400. +Its DTC406 scsi chip is supposedly compatible with the NCR 53C400. It is memory mapped, uses an IRQ, but no dma or io-port. There is internal DMA, between SCSI bus and an on-chip 128-byte buffer. Double buffering is done automagically by the chip. Data is transferred diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index 08e2b4d04aab..cda5f8fa2c66 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -1479,7 +1479,7 @@ Wide16 SCSI. Enabling serial NVRAM support enables detection of the serial NVRAM included on Symbios and some Symbios compatible host adaptors, and Tekram boards. The serial NVRAM is used by Symbios and Tekram to hold set up parameters for the -host adaptor and it's attached drives. +host adaptor and its attached drives. The Symbios NVRAM also holds data on the boot order of host adaptors in a system with more than one host adaptor. This enables the order of scanning diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt index f536907e241d..2b21890bc983 100644 --- a/Documentation/scsi/osst.txt +++ b/Documentation/scsi/osst.txt @@ -40,7 +40,7 @@ behavior looks very much the same as st to the userspace applications. History ------- -In the first place, osst shared it's identity very much with st. That meant +In the first place, osst shared its identity very much with st. That meant that it used the same kernel structures and the same device node as st. So you could only have either of them being present in the kernel. This has been fixed by registering an own device, now. diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index aec6549ab097..e00192de4d1c 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -70,7 +70,7 @@ Overview: up to an administrative entity controlling the vport. For example, if vports are to be associated with virtual machines, a XEN mgmt utility would be responsible for creating wwpn/wwnn's for the vport, - using it's own naming authority and OUI. (Note: it already does this + using its own naming authority and OUI. (Note: it already does this for virtual MAC addresses). @@ -81,7 +81,7 @@ Device Trees and Vport Objects: with rports and scsi target objects underneath it. Currently the FC transport creates the vport object and places it under the scsi_host object corresponding to the physical adapter. The LLDD will allocate - a new scsi_host for the vport and link it's object under the vport. + a new scsi_host for the vport and link its object under the vport. The remainder of the tree under the vports scsi_host is the same as the non-NPIV case. The transport is written currently to easily allow the parent of the vport to be something other than the scsi_host. diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index eb9a7b905b64..6f63b7989679 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -687,7 +687,7 @@ maintain the driver code. Enabling serial NVRAM support enables detection of the serial NVRAM included on Symbios and some Symbios compatible host adaptors, and Tekram boards. The serial NVRAM is used by Symbios and Tekram to hold set up parameters for the -host adaptor and it's attached drives. +host adaptor and its attached drives. The Symbios NVRAM also holds data on the boot order of host adaptors in a system with more than one host adaptor. This information is no longer used diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index 9ac842be9b4f..05bf5a0eee41 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -188,8 +188,8 @@ The WM8731 output mixer has 3 inputs (sources) 3. Mic Sidetone Input Each input in this example has a kcontrol associated with it (defined in example -above) and is connected to the output mixer via it's kcontrol name. We can now -connect the destination widget (wrt audio signal) with it's source widgets. +above) and is connected to the output mixer via its kcontrol name. We can now +connect the destination widget (wrt audio signal) with its source widgets. /* output mixer */ {"Output Mixer", "Line Bypass Switch", "Line Input"}, diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index bab7711ce963..2524c75557df 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -67,7 +67,7 @@ static struct snd_soc_dai_link corgi_dai = { .ops = &corgi_ops, }; -struct snd_soc_card then sets up the machine with it's DAIs. e.g. +struct snd_soc_card then sets up the machine with its DAIs. e.g. /* corgi audio machine driver */ static struct snd_soc_card snd_soc_corgi = { diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt index 1e4c6d3655f2..138ac88c1461 100644 --- a/Documentation/sound/alsa/soc/overview.txt +++ b/Documentation/sound/alsa/soc/overview.txt @@ -33,7 +33,7 @@ features :- and machines. * Easy I2S/PCM audio interface setup between codec and SoC. Each SoC - interface and codec registers it's audio interface capabilities with the + interface and codec registers its audio interface capabilities with the core and are subsequently matched and configured when the application hardware parameters are known. diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 34c76a55bc04..9b659c79a547 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -54,12 +54,12 @@ Getting sparse ~~~~~~~~~~~~~~ You can get latest released versions from the Sparse homepage at -http://www.kernel.org/pub/linux/kernel/people/josh/sparse/ +https://sparse.wiki.kernel.org/index.php/Main_Page Alternatively, you can get snapshots of the latest development version of sparse using git to clone.. - git://git.kernel.org/pub/scm/linux/kernel/git/josh/sparse.git + git://git.kernel.org/pub/scm/devel/sparse/sparse.git DaveJ has hourly generated tarballs of the git tree available at.. diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index 5d8bc2cd250c..c1a1fd636bf9 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -125,7 +125,7 @@ versions of the sysfs interface. - Block The converted block subsystem at /sys/class/block or /sys/subsystem/block will contain the links for disks and partitions - at the same level, never in a hierarchy. Assuming the block subsytem to + at the same level, never in a hierarchy. Assuming the block subsystem to contain only disks and not partition devices in the same flat list is a bug in the application. diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 778ddf38b82c..09bd8e902989 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -239,7 +239,7 @@ subsystem's filter file. For convenience, filters for every event in a subsystem can be set or cleared as a group by writing a filter expression into the filter file -at the root of the subsytem. Note however, that if a filter for any +at the root of the subsystem. Note however, that if a filter for any event within the subsystem lacks a field specified in the subsystem filter, or if the filter can't be applied for any other reason, the filter for that event will retain its previous setting. This can @@ -251,7 +251,7 @@ fields can be guaranteed to propagate successfully to all events. Here are a few subsystem filter examples that also illustrate the above points: -Clear the filters on all events in the sched subsytem: +Clear the filters on all events in the sched subsystem: # cd /sys/kernel/debug/tracing/events/sched # echo 0 > filter @@ -261,7 +261,7 @@ none none Set a filter using only common fields for all events in the sched -subsytem (all events end up with the same filter): +subsystem (all events end up with the same filter): # cd /sys/kernel/debug/tracing/events/sched # echo common_pid == 0 > filter @@ -271,7 +271,7 @@ common_pid == 0 common_pid == 0 Attempt to set a filter using a non-common field for all events in the -sched subsytem (all events but those that have a prev_pid field retain +sched subsystem (all events but those that have a prev_pid field retain their old filters): # cd /sys/kernel/debug/tracing/events/sched diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt index c480e9c32dbd..4c5e37939344 100644 --- a/Documentation/usb/WUSB-Design-overview.txt +++ b/Documentation/usb/WUSB-Design-overview.txt @@ -381,7 +381,7 @@ descriptor that gives us the status of the transfer, its identification we issue another URB to read into the destination buffer the chunk of data coming out of the remote endpoint. Done, wait for the next guy. The callbacks for the URBs issued from here are the ones that will declare -the xfer complete at some point and call it's callback. +the xfer complete at some point and call its callback. Seems simple, but the implementation is not trivial. diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index be45dbb9d7f2..6690fc34ef6d 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -45,7 +45,7 @@ most general to most specific: to establish the task policy for a child task exec()'d from an executable image that has no awareness of memory policy. See the MEMORY POLICY APIS section, below, for an overview of the system call - that a task may use to set/change it's task/process policy. + that a task may use to set/change its task/process policy. In a multi-threaded task, task policies apply only to the thread [Linux kernel task] that installs the policy and any threads @@ -301,7 +301,7 @@ decrement this reference count, respectively. mpol_put() will only free the structure back to the mempolicy kmem cache when the reference count goes to zero. -When a new memory policy is allocated, it's reference count is initialized +When a new memory policy is allocated, its reference count is initialized to '1', representing the reference held by the task that is installing the new policy. When a pointer to a memory policy structure is stored in another structure, another reference is added, as the task's reference will be dropped diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index e3333eec4320..212f4ac31c01 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -25,7 +25,7 @@ When a w1 master driver registers with the w1 subsystem, the following occurs: - sysfs entries for that w1 master are created - the w1 bus is periodically searched for new slave devices -When a device is found on the bus, w1 core checks if driver for it's family is +When a device is found on the bus, w1 core checks if driver for its family is loaded. If so, the family driver is attached to the slave. If there is no driver for the family, default one is assigned, which allows to perform almost any kind of operations. Each logical operation is a transaction diff --git a/MAINTAINERS b/MAINTAINERS index de39882924d0..2f5510cc142d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2701,16 +2701,12 @@ F: Documentation/timers/hpet.txt F: drivers/char/hpet.c F: include/linux/hpet.h -HPET: i386 -M: "Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com> +HPET: x86 +M: "Venkatesh Pallipadi (Venki)" <venki@google.com> S: Maintained F: arch/x86/kernel/hpet.c F: arch/x86/include/asm/hpet.h -HPET: x86_64 -M: Vojtech Pavlik <vojtech@suse.cz> -S: Maintained - HPET: ACPI M: Bob Picco <bob.picco@hp.com> S: Maintained diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index b3e888638bb7..6f32f9c84a2d 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -77,7 +77,7 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_UAC_NOPRINT 10 /* see sysinfo.h */ #define TIF_UAC_NOFIX 11 #define TIF_UAC_SIGBUS 12 -#define TIF_MEMDIE 13 +#define TIF_MEMDIE 13 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ #define TIF_FREEZE 16 /* is freezing for suspend */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index b74970ec02c4..763e29fa8530 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -141,7 +141,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define TIF_SYSCALL_TRACE 8 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 -#define TIF_MEMDIE 18 +#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 83b1aa63d778..0c3c0c884cd3 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -241,7 +241,7 @@ static struct clk clk_hsmmc = { /* i2s_eplldiv * - * This clock is the output from the I2S divisor of ESYSCLK, and is seperate + * This clock is the output from the I2S divisor of ESYSCLK, and is separate * from the mux that comes after it (cannot merge into one single clock) */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index f3a68d1a07b9..e358c7da8480 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -107,7 +107,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * others = Special functions (dependant on bank) * * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a seperate set of function + * registers instead of one, we do not have a separate set of function * (samsung_gpiolib_add_4bit2_chips)for each case. */ extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h index fd0c5d7e9337..7a9c03dcb0b6 100644 --- a/arch/avr32/include/asm/thread_info.h +++ b/arch/avr32/include/asm/thread_info.h @@ -81,7 +81,7 @@ static inline struct thread_info *current_thread_info(void) TIF_NEED_RESCHED */ #define TIF_BREAKPOINT 4 /* enter monitor mode on return */ #define TIF_SINGLE_STEP 5 /* single step in progress */ -#define TIF_MEMDIE 6 +#define TIF_MEMDIE 6 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ #define TIF_NOTIFY_RESUME 9 /* callback before returning to user */ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index e9a5614cdbb1..02560fd8a121 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -98,7 +98,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 +#define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ #define TIF_IRQ_SYNC 7 /* sync pipeline stage */ diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h index c3aade36c330..91776069ca80 100644 --- a/arch/cris/include/asm/thread_info.h +++ b/arch/cris/include/asm/thread_info.h @@ -85,7 +85,7 @@ struct thread_info { #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ #define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ #define TIF_FREEZE 18 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h index e608e056bb53..11f33ead29bf 100644 --- a/arch/frv/include/asm/thread_info.h +++ b/arch/frv/include/asm/thread_info.h @@ -113,7 +113,7 @@ register struct thread_info *__current_thread_info asm("gr15"); #define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ #define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h index 70e67e47d020..d6f1784bfdee 100644 --- a/arch/h8300/include/asm/thread_info.h +++ b/arch/h8300/include/asm/thread_info.h @@ -87,7 +87,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 +#define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_NOTIFY_RESUME 6 /* callback before returning to user */ #define TIF_FREEZE 16 /* is freezing for suspend */ diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h index 8ce2e388e37c..b6a5ba2aca34 100644 --- a/arch/ia64/include/asm/thread_info.h +++ b/arch/ia64/include/asm/thread_info.h @@ -102,7 +102,7 @@ struct thread_info { #define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ #define TIF_NOTIFY_RESUME 6 /* resumption notification requested */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ #define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ #define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ #define TIF_FREEZE 20 /* is freezing for suspend */ diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h index ed240b6e8e77..71faff5bcc27 100644 --- a/arch/m32r/include/asm/thread_info.h +++ b/arch/m32r/include/asm/thread_info.h @@ -142,7 +142,7 @@ static inline unsigned int get_thread_fault_code(void) #define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 /* OOM killer killed process */ +#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h index 67266c683453..3bf31dc51b12 100644 --- a/arch/m68k/include/asm/thread_info_mm.h +++ b/arch/m68k/include/asm/thread_info_mm.h @@ -65,7 +65,7 @@ struct thread_info { #define TIF_NEED_RESCHED 7 /* rescheduling necessary */ #define TIF_DELAYED_TRACE 14 /* single step a syscall */ #define TIF_SYSCALL_TRACE 15 /* syscall trace active */ -#define TIF_MEMDIE 16 +#define TIF_MEMDIE 16 /* is terminating due to OOM killer */ #define TIF_FREEZE 17 /* thread is freezing for suspend */ #endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h index 884776f686ca..51f354b672e6 100644 --- a/arch/m68k/include/asm/thread_info_no.h +++ b/arch/m68k/include/asm/thread_info_no.h @@ -85,7 +85,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 +#define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_FREEZE 16 /* is freezing for suspend */ /* as above, but as bit values */ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index b2ca80f64640..8a8e9fc6e0c0 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -122,7 +122,7 @@ static inline struct thread_info *current_thread_info(void) /* restore singlestep on return to user mode */ #define TIF_SINGLESTEP 4 #define TIF_IRET 5 /* return with iret */ -#define TIF_MEMDIE 6 +#define TIF_MEMDIE 6 /* is terminating due to OOM killer */ #define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ #define TIF_SECCOMP 10 /* secure computing */ #define TIF_FREEZE 14 /* Freezing for suspend */ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 845da2107ed1..2376f2e06e47 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -112,7 +112,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 +#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 #define TIF_FIXADE 20 /* Fix address errors in software */ #define TIF_LOGADE 21 /* Log address errors to syslog */ diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 7a8b0a8b643a..044bbe462c2c 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -253,7 +253,7 @@ void __init init_bcm1480_irqs(void) * On the second cpu, everything is set to IP5, which is * ignored, EXCEPT the mailbox interrupt. That one is * set to IP[2] so it is handled. This is needed so we - * can do cross-cpu function calls, as requred by SMP + * can do cross-cpu function calls, as required by SMP */ #define IMR_IP2_VAL K_BCM1480_INT_MAP_I0 diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 62371f772553..12ac04a658ee 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -236,7 +236,7 @@ void __init init_sb1250_irqs(void) * On the second cpu, everything is set to IP5, which is * ignored, EXCEPT the mailbox interrupt. That one is * set to IP[2] so it is handled. This is needed so we - * can do cross-cpu function calls, as requred by SMP + * can do cross-cpu function calls, as required by SMP */ #define IMR_IP2_VAL K_INT_MAP_I0 diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 58d64f8b2cc3..2001cb657a95 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -148,7 +148,7 @@ static inline unsigned long current_stack_pointer(void) #define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ #define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index 7ecc1039cfed..aa8de727e90b 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -56,7 +56,7 @@ struct thread_info { #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_32BIT 4 /* 32 bit binary */ -#define TIF_MEMDIE 5 +#define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */ #define TIF_FREEZE 7 /* is freezing for suspend */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index aa9d383a1c09..65eb85976a03 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -104,7 +104,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SINGLESTEP 8 /* singlestepping active */ -#define TIF_MEMDIE 9 +#define TIF_MEMDIE 9 /* is terminating due to OOM killer */ #define TIF_SECCOMP 10 /* secure computing */ #define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 12 /* Force successful syscall return */ diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c index 57e5b608fa1a..174a04ac4806 100644 --- a/arch/powerpc/platforms/embedded6xx/wii.c +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -69,10 +69,10 @@ void __init wii_memory_fixups(void) /* * This is part of a workaround to allow the use of two - * discontiguous RAM ranges on the Wii, even if this is + * discontinuous RAM ranges on the Wii, even if this is * currently unsupported on 32-bit PowerPC Linux. * - * We coealesce the two memory ranges of the Wii into a + * We coalesce the two memory ranges of the Wii into a * single range, then create a reservation for the "hole" * between both ranges. */ diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index be3d3f91d86c..5baf0230b29b 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -97,7 +97,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_31BIT 17 /* 32bit process */ -#define TIF_MEMDIE 18 +#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */ #define TIF_FREEZE 20 /* thread is freezing for suspend */ diff --git a/arch/score/include/asm/thread_info.h b/arch/score/include/asm/thread_info.h index 55939992c27d..8570d08f58c1 100644 --- a/arch/score/include/asm/thread_info.h +++ b/arch/score/include/asm/thread_info.h @@ -92,7 +92,7 @@ register struct thread_info *__current_thread_info __asm__("r28"); #define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 +#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index 55a36fef6875..c228946926ed 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -121,7 +121,7 @@ extern void init_thread_xstate(void); #define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ #define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 +#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 /* Freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h index 844d73a0340c..9dd0318d3ddf 100644 --- a/arch/sparc/include/asm/thread_info_32.h +++ b/arch/sparc/include/asm/thread_info_32.h @@ -132,7 +132,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) * this quantum (SMP) */ #define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling * TIF_NEED_RESCHED */ -#define TIF_MEMDIE 10 +#define TIF_MEMDIE 10 /* is terminating due to OOM killer */ #define TIF_FREEZE 11 /* is freezing for suspend */ /* as above, but as bit values */ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index 4827a3aeac7f..fb2ea7705a46 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -223,7 +223,7 @@ register struct thread_info *current_thread_info_reg asm("g6"); * an immediate value in instructions such as andcc. */ /* flag bit 12 is available */ -#define TIF_MEMDIE 13 +#define TIF_MEMDIE 13 /* is terminating due to OOM killer */ #define TIF_POLLING_NRFLAG 14 #define TIF_FREEZE 15 /* is freezing for suspend */ diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 7a656bd8bd3c..7f7338c90784 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -19,7 +19,6 @@ static irqreturn_t line_interrupt(int irq, void *data) { struct chan *chan = data; struct line *line = chan->line; - struct tty_struct *tty; if (line) chan_interrupt(&line->chan_list, &line->task, line->tty, irq); diff --git a/arch/um/include/asm/system.h b/arch/um/include/asm/system.h index 753346e2cdfd..93af1cf0907d 100644 --- a/arch/um/include/asm/system.h +++ b/arch/um/include/asm/system.h @@ -3,11 +3,8 @@ #include "sysdep/system.h" -extern void *switch_to(void *prev, void *next, void *last); - extern int get_signals(void); extern int set_signals(int enable); -extern int get_signals(void); extern void block_signals(void); extern void unblock_signals(void); diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h index fd911f855367..e2cf786bda0a 100644 --- a/arch/um/include/asm/thread_info.h +++ b/arch/um/include/asm/thread_info.h @@ -63,10 +63,9 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SIGPENDING 1 /* signal pending */ #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - * TIF_NEED_RESCHED - */ -#define TIF_RESTART_BLOCK 4 -#define TIF_MEMDIE 5 + * TIF_NEED_RESCHED */ +#define TIF_RESTART_BLOCK 4 +#define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_SYSCALL_AUDIT 6 #define TIF_RESTORE_SIGMASK 7 #define TIF_FREEZE 16 /* is freezing for suspend */ diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c index 4e3b820bd2be..f5173e1ec3ac 100644 --- a/arch/um/kernel/skas/syscall.c +++ b/arch/um/kernel/skas/syscall.c @@ -10,7 +10,7 @@ #include "sysdep/syscalls.h" extern int syscall_table_size; -#define NR_syscalls (syscall_table_size / sizeof(void *)) +#define NR_SYSCALLS (syscall_table_size / sizeof(void *)) void handle_syscall(struct uml_pt_regs *r) { @@ -30,7 +30,7 @@ void handle_syscall(struct uml_pt_regs *r) * in case it's a compiler bug. */ syscall = UPT_SYSCALL_NR(r); - if ((syscall >= NR_syscalls) || (syscall < 0)) + if ((syscall >= NR_SYSCALLS) || (syscall < 0)) result = -ENOSYS; else result = EXECUTE_SYSCALL(syscall, regs); diff --git a/arch/um/sys-i386/asm/elf.h b/arch/um/sys-i386/asm/elf.h index e64cd41d7bab..a979a22a8d9f 100644 --- a/arch/um/sys-i386/asm/elf.h +++ b/arch/um/sys-i386/asm/elf.h @@ -75,6 +75,8 @@ typedef struct user_i387_struct elf_fpregset_t; pr_reg[16] = PT_REGS_SS(regs); \ } while (0); +struct task_struct; + extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu); #define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu) diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h index 49655c83efd2..d760967f33a7 100644 --- a/arch/um/sys-x86_64/asm/elf.h +++ b/arch/um/sys-x86_64/asm/elf.h @@ -95,6 +95,8 @@ typedef struct user_i387_struct elf_fpregset_t; (pr_reg)[25] = 0; \ (pr_reg)[26] = 0; +struct task_struct; + extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu); #define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu) diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index 1a899a7ed7a6..b6b65c7c7a7d 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -6,6 +6,7 @@ #include <linux/personality.h> #include <linux/ptrace.h> +#include <linux/kernel.h> #include <asm/unistd.h> #include <asm/uaccess.h> #include <asm/ucontext.h> @@ -165,8 +166,6 @@ struct rt_sigframe struct _fpstate fpstate; }; -#define round_down(m, n) (((m) / (n)) * (n)) - int setup_signal_stack_si(unsigned long stack_top, int sig, struct k_sigaction *ka, struct pt_regs * regs, siginfo_t *info, sigset_t *set) diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 0ec6d12d84e6..0797e748d280 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -105,7 +105,7 @@ do { \ /* * Generate a percpu add to memory instruction and optimize code - * if a one is added or subtracted. + * if one is added or subtracted. */ #define percpu_add_op(var, val) \ do { \ diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index d4092fac226b..62ba9400cc43 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -87,7 +87,7 @@ struct thread_info { #define TIF_NOTSC 16 /* TSC is not accessible in userland */ #define TIF_IA32 17 /* 32bit process */ #define TIF_FORK 18 /* ret_from_fork */ -#define TIF_MEMDIE 20 +#define TIF_MEMDIE 20 /* is terminating due to OOM killer */ #define TIF_DEBUG 21 /* uses debug registers */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ #define TIF_FREEZE 23 /* is freezing for suspend */ diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h index 13165641cc51..7be8accb0b0c 100644 --- a/arch/xtensa/include/asm/thread_info.h +++ b/arch/xtensa/include/asm/thread_info.h @@ -129,7 +129,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ #define TIF_IRET 4 /* return with iret */ -#define TIF_MEMDIE 5 +#define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_FREEZE 17 /* is freezing for suspend */ diff --git a/crypto/Kconfig b/crypto/Kconfig index 403857ad06d4..9d9434f08c92 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -28,7 +28,7 @@ config CRYPTO_FIPS This options enables the fips boot option which is required if you want to system to operate in a FIPS 200 certification. You should say no unless you know what - this is. Note that CRYPTO_ANSI_CPRNG is requred if this + this is. Note that CRYPTO_ANSI_CPRNG is required if this option is selected config CRYPTO_ALGAPI diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7594f65800cf..4bc1c4178f50 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1406,7 +1406,7 @@ acpi_os_invalidate_address( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SytemMemory + /* Only interference checks against SystemIO and SystemMemory are needed */ res.start = address; res.end = address + length - 1; @@ -1458,7 +1458,7 @@ acpi_os_validate_address ( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SytemMemory + /* Only interference checks against SystemIO and SystemMemory are needed */ res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL); if (!res) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index ddc76787b842..f74d3b31e5c9 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -172,7 +172,6 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) return -EINVAL; /* The state of the list is 'on' IFF all resources are 'on'. */ - /* */ for (i = 0; i < list->count; i++) { /* diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 83bc49fac9bb..ec52fc618763 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -43,7 +43,7 @@ * driver the list of errata that are relevant is below, going back to * PIIX4. Older device documentation is now a bit tricky to find. * - * The chipsets all follow very much the same design. The orginal Triton + * The chipsets all follow very much the same design. The original Triton * series chipsets do _not_ support independant device timings, but this * is fixed in Triton II. With the odd mobile exception the chips then * change little except in gaining more modes until SATA arrives. This diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index eb5ff0531cfb..51ceaee98f9f 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1588,7 +1588,6 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode, c->Request = ioc->Request; if (ioc->buf_size > 0) { - int i; for (i = 0; i < sg_used; i++) { temp64.val = pci_map_single(host->pdev, buff[i], @@ -2434,7 +2433,7 @@ static int deregister_disk(ctlr_info_t *h, int drv_index, /* if it was the last disk, find the new hightest lun */ if (clear_all && recalculate_highest_lun) { - int i, newhighest = -1; + int newhighest = -1; for (i = 0; i <= h->highest_lun; i++) { /* if the disk has size > 0, it is available */ if (h->drv[i] && h->drv[i]->heads) diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index fb86708e47ed..4b51982fd23a 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -1214,7 +1214,7 @@ struct agp_memory *agp_generic_alloc_user(size_t page_count, int type) return NULL; for (i = 0; i < page_count; i++) - new->pages[i] = 0; + new->pages[i] = NULL; new->page_count = 0; new->type = type; new->num_scratch_pages = pages; diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 7fef305774de..89d871ef8c2f 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -253,7 +253,7 @@ static int bsr_add_node(struct device_node *bn) cur->bsr_device = device_create(bsr_class, NULL, cur->bsr_dev, cur, cur->bsr_name); - if (!cur->bsr_device) { + if (IS_ERR(cur->bsr_device)) { printk(KERN_ERR "device_create failed for %s\n", cur->bsr_name); cdev_del(&cur->bsr_cdev); diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 94b16e0340ae..a3b083a7403a 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -1351,7 +1351,7 @@ static void bus_reset_tasklet(unsigned long data) * was set up before this reset, the old one is now no longer * in use and we can free it. Update the config rom pointers * to point to the current config rom and clear the - * next_config_rom pointer so a new udpate can take place. + * next_config_rom pointer so a new update can take place. */ if (ohci->next_config_rom != NULL) { diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index f7ba82ebf65a..2092e7bb788f 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -961,7 +961,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request) dma->buflist[i + dma->buf_count] = &entry->buflist[i]; } - /* No allocations failed, so now we can replace the orginal pagelist + /* No allocations failed, so now we can replace the original pagelist * with the new one. */ if (dma->page_count) { diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c7502b6b1600..f27e3703a716 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -905,9 +905,9 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, memset(best_clock, 0, sizeof(*best_clock)); max_n = limit->n.max; - /* based on hardware requriment prefer smaller n to precision */ + /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { - /* based on hardware requirment prefere larger m1,m2 */ + /* based on hardware requirement, prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { for (clock.m2 = limit->m2.max; diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 27e2c715be11..5319d9e2f7ba 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -3780,7 +3780,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT UCHAR ucReserved[2]; }ATOM_ASIC_SS_ASSIGNMENT; -//Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type. +//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type. //SS is not required or enabled if a match is not found. #define ASIC_INTERNAL_MEMORY_SS 1 #define ASIC_INTERNAL_ENGINE_SS 2 @@ -5895,7 +5895,7 @@ typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO UCHAR ucPadding; // For proper alignment and size. USHORT usVDDC; // For the 780, use: None, Low, High, Variable UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} - UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement. USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). ULONG ulFlags; } ATOM_PPLIB_RS780_CLOCK_INFO; diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 37d12e5efa49..1d7aea132a09 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1474,7 +1474,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd) /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index fbf8c5379ea8..4b4a30b0dabd 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1328,7 +1328,7 @@ bail: /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * @@ -1394,7 +1394,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr, /** * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index a805402dd4ae..34b778ed97fc 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -1738,7 +1738,7 @@ bail: /** * ipath_7220_put_tid - write a TID to the chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: 0 for eager, 1 for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 75e71b5d9215..095ed76ebe80 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -117,7 +117,7 @@ * NOTE: only one mode value must be given for every card. * -> See hfc_multi.h for HFC_IO_MODE_* values * By default, the IO mode is pci memory IO (MEMIO). - * Some cards requre specific IO mode, so it cannot be changed. + * Some cards require specific IO mode, so it cannot be changed. * It may be usefull to set IO mode to register io (REGIO) to solve * PCI bridge problems. * If unsure, don't give this parameter. diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c index 051b44e2556c..384d5118e325 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.c +++ b/drivers/isdn/hisax/hfc4s8s_l1.c @@ -310,7 +310,7 @@ wait_busy(hfc4s8s_hw * a) /******************************************************/ /* function to read critical counter registers that */ -/* may be udpated by the chip during read */ +/* may be updated by the chip during read */ /******************************************************/ static u_char Read_hfc8_stable(hfc4s8s_hw * hw, int reg) diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c index 565d5b2adc95..129cda737880 100644 --- a/drivers/macintosh/windfarm_pm81.c +++ b/drivers/macintosh/windfarm_pm81.c @@ -188,7 +188,7 @@ struct wf_smu_sys_fans_state { }; /* - * Configs for SMU Sytem Fan control loop + * Configs for SMU System Fan control loop */ static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = { /* Model ID 2 */ diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c index d14bd227b502..93c21ddd0b77 100644 --- a/drivers/media/dvb/dvb-usb/friio-fe.c +++ b/drivers/media/dvb/dvb-usb/friio-fe.c @@ -300,7 +300,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { /** - * NOTE: ignore all the paramters except frequency. + * NOTE: ignore all the parameters except frequency. * others should be fixed to the proper value for ISDB-T, * but don't check here. */ diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index 11073fa3d9f4..d33693c13368 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -314,22 +314,22 @@ static int i2o_cfg_swul(unsigned long arg) int ret = 0; if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) - goto return_fault; + return -EFAULT; if (get_user(swlen, kxfer.swlen) < 0) - goto return_fault; + return -EFAULT; if (get_user(maxfrag, kxfer.maxfrag) < 0) - goto return_fault; + return -EFAULT; if (get_user(curfrag, kxfer.curfrag) < 0) - goto return_fault; + return -EFAULT; if (curfrag == maxfrag) fragsize = swlen - (maxfrag - 1) * 8192; if (!kxfer.buf) - goto return_fault; + return -EFAULT; c = i2o_find_iop(kxfer.iop); if (!c) @@ -373,12 +373,8 @@ static int i2o_cfg_swul(unsigned long arg) i2o_dma_free(&c->pdev->dev, &buffer); - return_ret: return ret; - return_fault: - ret = -EFAULT; - goto return_ret; -}; +} static int i2o_cfg_swdel(unsigned long arg) { diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c index f939ebc2507c..e306a8cd2f96 100644 --- a/drivers/misc/eeprom/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c @@ -1,24 +1,20 @@ /* - Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - Philip Edelbrock <phil@netroedge.com> - Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> - Copyright (C) 2003 IBM Corp. - Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + * Philip Edelbrock <phil@netroedge.com> + * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 15b1780025c8..7b33de95c4bf 100644 --- a/drivers/misc/eeprom/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -1,27 +1,20 @@ /* - Copyright (C) 2004 - 2006 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: eeprom_93cx6 - Abstract: EEPROM reader routines for 93cx6 chipsets. - Supported chipsets: 93c46 & 93c66. + * Copyright (C) 2004 - 2006 rt2x00 SourceForge Project + * <http://rt2x00.serialmonkey.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Module: eeprom_93cx6 + * Abstract: EEPROM reader routines for 93cx6 chipsets. + * Supported chipsets: 93c46 & 93c66. */ #include <linux/kernel.h> diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c index 5a6b2bce8ad5..fe2909278507 100644 --- a/drivers/misc/eeprom/max6875.c +++ b/drivers/misc/eeprom/max6875.c @@ -1,30 +1,30 @@ /* - max6875.c - driver for MAX6874/MAX6875 - - Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> - - Based on eeprom.c - - The MAX6875 has a bank of registers and two banks of EEPROM. - Address ranges are defined as follows: - * 0x0000 - 0x0046 = configuration registers - * 0x8000 - 0x8046 = configuration EEPROM - * 0x8100 - 0x82FF = user EEPROM - - This driver makes the user EEPROM available for read. - - The registers & config EEPROM should be accessed via i2c-dev. - - The MAX6875 ignores the lowest address bit, so each chip responds to - two addresses - 0x50/0x51 and 0x52/0x53. - - Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read - address, so this driver is destructive if loaded for the wrong EEPROM chip. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 of the License. -*/ + * max6875.c - driver for MAX6874/MAX6875 + * + * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> + * + * Based on eeprom.c + * + * The MAX6875 has a bank of registers and two banks of EEPROM. + * Address ranges are defined as follows: + * * 0x0000 - 0x0046 = configuration registers + * * 0x8000 - 0x8046 = configuration EEPROM + * * 0x8100 - 0x82FF = user EEPROM + * + * This driver makes the user EEPROM available for read. + * + * The registers & config EEPROM should be accessed via i2c-dev. + * + * The MAX6875 ignores the lowest address bit, so each chip responds to + * two addresses - 0x50/0x51 and 0x52/0x53. + * + * Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read + * address, so this driver is destructive if loaded for the wrong EEPROM chip. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 760069345b11..fd1f29e0317d 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -683,7 +683,7 @@ struct drv_func_mb { #define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 #define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 /* - * The optic module verification commands requris bootcode + * The optic module verification commands require bootcode * v5.0.6 or later */ #define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000 diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index f0be507e5324..369a8016b1ff 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -96,7 +96,7 @@ static inline int precise_ie(void) * post_eurus_cmd helpers */ struct eurus_cmd_arg_info { - int pre_arg; /* command requres arg1, arg2 at POST COMMAND */ + int pre_arg; /* command requires arg1, arg2 at POST COMMAND */ int post_arg; /* command requires arg1, arg2 at GET_RESULT */ }; diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index cbf520d38eac..ffbaa608e002 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -736,7 +736,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev) SMSC_TRACE(HW, "configuring for carrier OK"); if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && (!pdata->using_extphy)) { - /* Restore orginal GPIO configuration */ + /* Restore original GPIO configuration */ pdata->gpio_setting = pdata->gpio_orig_setting; smsc911x_reg_write(pdata, GPIO_CFG, pdata->gpio_setting); @@ -750,7 +750,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev) if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && (!pdata->using_extphy)) { /* Force 10/100 LED off, after saving - * orginal GPIO configuration */ + * original GPIO configuration */ pdata->gpio_orig_setting = pdata->gpio_setting; pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index f184d1d2ecbe..6644337d63d6 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -848,7 +848,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_disable_device; } - /* Check for the proper subsytem ID's + /* Check for the proper subsystem ID's * Intel uses a different SSID programming model than Compaq. * For Intel, each SSID bit identifies a PHP capability. * Also Intel HPC's may have RID=0. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 37499127c801..1df7c508814e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1503,7 +1503,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev) * pci_back_from_sleep - turn PCI device on during system-wide transition into working state * @dev: Device to handle. * - * Disable device's sytem wake-up capability and put it into D0. + * Disable device's system wake-up capability and put it into D0. */ int pci_back_from_sleep(struct pci_dev *dev) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 4eb10f48d270..f8077b3c8c8c 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -244,7 +244,7 @@ struct pci_ats { int stu; /* Smallest Translation Unit */ int qdep; /* Invalidate Queue Depth */ int ref_cnt; /* Physical Function reference count */ - int is_enabled:1; /* Enable bit is set */ + unsigned int is_enabled:1; /* Enable bit is set */ }; #ifdef CONFIG_PCI_IOV diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 3cbaf1811bd0..d37c445f0eda 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -119,7 +119,7 @@ enum ps3_sys_manager_service_id { * enum ps3_sys_manager_attr - Notification attribute (bit position mask). * @PS3_SM_ATTR_POWER: Power button. * @PS3_SM_ATTR_RESET: Reset button, not available on retail console. - * @PS3_SM_ATTR_THERMAL: Sytem thermal alert. + * @PS3_SM_ATTR_THERMAL: System thermal alert. * @PS3_SM_ATTR_CONTROLLER: Remote controller event. * @PS3_SM_ATTR_ALL: Logical OR of all. * diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 2b4e40d31190..51cf2bb37438 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1540,7 +1540,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages); * Context: can sleep * * Returns a voltage that can be passed to @regulator_set_voltage(), - * zero if this selector code can't be used on this sytem, or a + * zero if this selector code can't be used on this system, or a * negative errno. */ int regulator_list_voltage(struct regulator *regulator, unsigned selector) diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c index c9522f3bc21c..9718aaaa8215 100644 --- a/drivers/rtc/rtc-rx8581.c +++ b/drivers/rtc/rtc-rx8581.c @@ -1,8 +1,8 @@ /* * An I2C driver for the Epson RX8581 RTC * - * Author: Martyn Welch <martyn.welch@gefanuc.com> - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Author: Martyn Welch <martyn.welch@ge.com> + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -272,7 +272,7 @@ static void __exit rx8581_exit(void) i2c_del_driver(&rx8581_driver); } -MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>"); MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c index 875ba099e7a5..b53a00198dbe 100644 --- a/drivers/rtc/rtc-stk17ta8.c +++ b/drivers/rtc/rtc-stk17ta8.c @@ -1,7 +1,7 @@ /* * A RTC driver for the Simtek STK17TA8 * - * By Thomas Hommel <thomas.hommel@gefanuc.com> + * By Thomas Hommel <thomas.hommel@ge.com> * * Based on the DS1553 driver from * Atsushi Nemoto <anemo@mba.ocn.ne.jp> @@ -382,7 +382,7 @@ static __exit void stk17ta8_exit(void) module_init(stk17ta8_init); module_exit(stk17ta8_exit); -MODULE_AUTHOR("Thomas Hommel <thomas.hommel@gefanuc.com>"); +MODULE_AUTHOR("Thomas Hommel <thomas.hommel@ge.com>"); MODULE_DESCRIPTION("Simtek STK17TA8 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c index 62c2647f37f4..4a51e3f09689 100644 --- a/drivers/s390/char/sclp_cpi_sys.c +++ b/drivers/s390/char/sclp_cpi_sys.c @@ -102,7 +102,7 @@ static struct sclp_req *cpi_prepare_req(void) /* set system name */ set_data(evb->system_name, system_name); - /* set sytem level */ + /* set system level */ evb->system_level = system_level; /* set sysplex name */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h index b0ac9ac15c5d..6eaf519eccdc 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h @@ -50,7 +50,7 @@ struct bfa_cee_lldp_str_s { }; -/* LLDP paramters */ +/* LLDP parameters */ struct bfa_cee_lldp_cfg_s { struct bfa_cee_lldp_str_s chassis_id; struct bfa_cee_lldp_str_s port_id; diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h index 4374494bd566..ec78b4cb121a 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h @@ -223,9 +223,9 @@ enum bfa_status { BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to * Non-Zero Value */ BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network - * Subsytem Lock Failed.Please + * Subsystem Lock Failed.Please * try after some time */ - BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem + BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsystem * handle Failed. Please try * after some time */ BFA_STATUS_IM_NOT_BOUND = 143, /* IM driver is not active */ diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 14d052316502..e324627d97a2 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -640,7 +640,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) } mpc8xxx_spi = spi_master_get_devdata(spi->master); - hw_mode = cs->hw_mode; /* Save orginal settings */ + hw_mode = cs->hw_mode; /* Save original settings */ cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); /* mask out bits we are going to set */ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c index ed3070edcac1..4fcc4351e73f 100644 --- a/drivers/staging/vt6655/rxtx.c +++ b/drivers/staging/vt6655/rxtx.c @@ -25,19 +25,19 @@ * Date: May 20, 2003 * * Functions: - * s_vGenerateTxParameter - Generate tx dma requried parameter. + * s_vGenerateTxParameter - Generate tx dma required parameter. * vGenerateMACHeader - Translate 802.3 to 802.11 header - * cbGetFragCount - Caculate fragement number count + * cbGetFragCount - Caculate fragment number count * csBeacon_xmit - beacon tx function * csMgmt_xmit - management tx function * s_cbFillTxBufHead - fulfill tx dma buffer header * s_uGetDataDuration - get tx data required duration * s_uFillDataHead- fulfill tx data duration header - * s_uGetRTSCTSDuration- get rtx/cts requried duration + * s_uGetRTSCTSDuration- get rtx/cts required duration * s_uGetRTSCTSRsvTime- get rts/cts reserved time * s_uGetTxRsvTime- get frame reserved time * s_vFillCTSHead- fulfill CTS ctl header - * s_vFillFragParameter- Set fragement ctl parameter. + * s_vFillFragParameter- Set fragment ctl parameter. * s_vFillRTSHead- fulfill RTS ctl header * s_vFillTxKey- fulfill tx encrypt key * s_vSWencryption- Software encrypt header @@ -877,7 +877,7 @@ s_vFillRTSHead ( } // Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account. - // Otherwise, we need to modified codes for them. + // Otherwise, we need to modify codes for them. if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) { if (byFBOption == AUTO_FB_NONE) { PSRTS_g pBuf = (PSRTS_g)pvRTS; @@ -1133,7 +1133,7 @@ s_vFillCTSHead ( * * Parameters: * In: - * pDevice - Pointer to adpater + * pDevice - Pointer to adapter * pTxDataHead - Transmit Data Buffer * pTxBufHead - pTxBufHead * pvRrvTime - pvRrvTime @@ -2252,7 +2252,7 @@ vGenerateFIFOHeader ( * * Parameters: * In: - * pDevice - Pointer to adpater + * pDevice - Pointer to adapter * dwTxBufferAddr - Transmit Buffer * pPacket - Packet from upper layer * cbPacketSize - Transmit Data Length diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index d9fa36c95230..a2ce6fad8ee5 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -25,17 +25,17 @@ * Date: May 20, 2003 * * Functions: - * s_vGenerateTxParameter - Generate tx dma requried parameter. + * s_vGenerateTxParameter - Generate tx dma required parameter. * s_vGenerateMACHeader - Translate 802.3 to 802.11 header * csBeacon_xmit - beacon tx function * csMgmt_xmit - management tx function * s_uGetDataDuration - get tx data required duration * s_uFillDataHead- fulfill tx data duration header - * s_uGetRTSCTSDuration- get rtx/cts requried duration + * s_uGetRTSCTSDuration- get rtx/cts required duration * s_uGetRTSCTSRsvTime- get rts/cts reserved time * s_uGetTxRsvTime- get frame reserved time * s_vFillCTSHead- fulfill CTS ctl header - * s_vFillFragParameter- Set fragement ctl parameter. + * s_vFillFragParameter- Set fragment ctl parameter. * s_vFillRTSHead- fulfill RTS ctl header * s_vFillTxKey- fulfill tx encrypt key * s_vSWencryption- Software encrypt header diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 40a858335035..0cd6c7795d90 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -181,7 +181,7 @@ struct ehci_hcd_omap { void __iomem *ehci_base; /* Regulators for USB PHYs. - * Each PHY can have a seperate regulator. + * Each PHY can have a separate regulator. */ struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 112ef7e26f6b..608d61a105f6 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -76,7 +76,7 @@ * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end * we are going to have to rebuild all this based on an scheduler, * to where we have a list of transactions to do and based on the - * availability of the different requried components (blocks, + * availability of the different required components (blocks, * rpipes, segment slots, etc), we go scheduling them. Painful. */ #include <linux/init.h> diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c index 5eb61b5adfe8..42fe155aba0e 100644 --- a/drivers/video/cobalt_lcdfb.c +++ b/drivers/video/cobalt_lcdfb.c @@ -123,7 +123,7 @@ static void lcd_clear(struct fb_info *info) lcd_write_control(info, LCD_RESET); } -static struct fb_fix_screeninfo cobalt_lcdfb_fix __initdata = { +static struct fb_fix_screeninfo cobalt_lcdfb_fix __devinitdata = { .id = "cobalt-lcd", .type = FB_TYPE_TEXT, .type_aux = FB_AUX_TEXT_MDA, diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 24747aef1952..95896f387927 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -655,7 +655,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, /* we use the subsystem vendor/device id as the virtio vendor/device * id. this allows us to use the same PCI vendor/device id for all * virtio devices and to identify the particular virtio driver by - * the subsytem ids */ + * the subsystem ids */ vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; vp_dev->vdev.id.device = pci_dev->subsystem_device; diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig index a9efb1625321..d874b4f34136 100644 --- a/drivers/vlynq/Kconfig +++ b/drivers/vlynq/Kconfig @@ -1,8 +1,8 @@ menu "TI VLYNQ" + depends on AR7 && EXPERIMENTAL config VLYNQ bool "TI VLYNQ bus support" - depends on AR7 && EXPERIMENTAL help Support for Texas Instruments(R) VLYNQ bus. The VLYNQ bus is a high-speed, serial and packetized diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index c03d4dce4d76..bc2ff5932769 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1889,7 +1889,7 @@ static struct kmem_cache *get_slab(size_t size) BUG_ON(i >= JBD2_MAX_SLABS); if (unlikely(i < 0)) i = 0; - BUG_ON(jbd2_slab[i] == 0); + BUG_ON(jbd2_slab[i] == NULL); return jbd2_slab[i]; } diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 9e2f6a721668..c92ea3b3ea5e 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -2438,7 +2438,7 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level) /* check if this is a control page update for an allocation. * if so, update the leaf to reflect the new leaf value using - * dbSplit(); otherwise (deallocation), use dbJoin() to udpate + * dbSplit(); otherwise (deallocation), use dbJoin() to update * the leaf with the new value. in addition to updating the * leaf, dbSplit() will also split the binary buddy system of * the leaves, if required, and bubble new values within the diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c index 2396a85c0f55..72d1893ddd36 100644 --- a/fs/logfs/dir.c +++ b/fs/logfs/dir.c @@ -12,7 +12,7 @@ * Atomic dir operations * * Directory operations are by default not atomic. Dentries and Inodes are - * created/removed/altered in seperate operations. Therefore we need to do + * created/removed/altered in separate operations. Therefore we need to do * a small amount of journaling. * * Create, link, mkdir, mknod and symlink all share the same function to do diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h index 93b55f337245..1a9db84f8d8f 100644 --- a/fs/logfs/logfs.h +++ b/fs/logfs/logfs.h @@ -707,7 +707,7 @@ static inline gc_level_t expand_level(u64 ino, level_t __level) u8 level = (__force u8)__level; if (ino == LOGFS_INO_MASTER) { - /* ifile has seperate areas */ + /* ifile has separate areas */ level += LOGFS_MAX_LEVELS; } return (__force gc_level_t)level; diff --git a/fs/logfs/logfs_abi.h b/fs/logfs/logfs_abi.h index f674725663fe..ae960519c54a 100644 --- a/fs/logfs/logfs_abi.h +++ b/fs/logfs/logfs_abi.h @@ -50,9 +50,9 @@ static inline void check_##type(void) \ * 12 - gc recycled blocks, long-lived data * 13 - replacement blocks, short-lived data * - * Levels 1-11 are necessary for robust gc operations and help seperate + * Levels 1-11 are necessary for robust gc operations and help separate * short-lived metadata from longer-lived file data. In the future, - * file data should get seperated into several segments based on simple + * file data should get separated into several segments based on simple * heuristics. Old data recycled during gc operation is expected to be * long-lived. New data is of uncertain life expectancy. New data * used to replace older blocks in existing files is expected to be @@ -117,7 +117,7 @@ static inline void check_##type(void) \ #define pure_ofs(ofs) (ofs & ~LOGFS_FULLY_POPULATED) /* - * LogFS needs to seperate data into levels. Each level is defined as the + * LogFS needs to separate data into levels. Each level is defined as the * maximal possible distance from the master inode (inode of the inode file). * Data blocks reside on level 0, 1x indirect block on level 1, etc. * Inodes reside on level 6, indirect blocks for the inode file on levels 7-11. @@ -204,7 +204,7 @@ SIZE_CHECK(logfs_segment_header, LOGFS_SEGMENT_HEADERSIZE); * @ds_crc: crc32 of structure starting with the next field * @ds_ifile_levels: maximum number of levels for ifile * @ds_iblock_levels: maximum number of levels for regular files - * @ds_data_levels: number of seperate levels for data + * @ds_data_levels: number of separate levels for data * @pad0: reserved, must be 0 * @ds_feature_incompat: incompatible filesystem features * @ds_feature_ro_compat: read-only compatible filesystem features @@ -456,7 +456,7 @@ enum logfs_vim { * @vim: life expectancy of data * * "Areas" are segments currently being used for writing. There is at least - * one area per GC level. Several may be used to seperate long-living from + * one area per GC level. Several may be used to separate long-living from * short-living data. If an area with unknown vim is encountered, it can * simply be closed. * The write buffer immediately follow this header. diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c index c82af6acc2e7..b44bb835e8ea 100644 --- a/fs/omfs/inode.c +++ b/fs/omfs/inode.c @@ -3,7 +3,6 @@ * Copyright (C) 2006 Bob Copeland <me@bobcopeland.com> * Released under GPL v2. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/sched.h> #include <linux/slab.h> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index fb6784e86d5f..a63b77d89d30 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -496,7 +496,7 @@ struct twl4030_madc_platform_data { int irq_line; }; -/* Boards have uniqe mappings of {row, col} --> keycode. +/* Boards have unique mappings of {row, col} --> keycode. * Column and row are 8 bits each, but range only from 0..7. * a PERSISTENT_KEY is "always on" and never reported. */ @@ -664,15 +664,15 @@ static inline int twl4030charger_usb_en(int enable) { return 0; } #define TWL4030_REG_VUSB3V1 19 /* TWL6030 SMPS/LDO's */ -/* EXTERNAL dc-to-dc buck convertor contollable via SR */ +/* EXTERNAL dc-to-dc buck convertor controllable via SR */ #define TWL6030_REG_VDD1 30 #define TWL6030_REG_VDD2 31 #define TWL6030_REG_VDD3 32 /* Non SR compliant dc-to-dc buck convertors */ -#define TWL6030_REG_VMEM 33 +#define TWL6030_REG_VMEM 33 #define TWL6030_REG_V2V1 34 -#define TWL6030_REG_V1V29 35 +#define TWL6030_REG_V1V29 35 #define TWL6030_REG_V1V8 36 /* EXTERNAL LDOs */ diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index e117b1aee69c..9fad0527344f 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -201,7 +201,7 @@ static inline __must_check unsigned int kfifo_avail(struct kfifo *fifo) * @n: the length of the data to be added. * @lock: pointer to the spinlock to use for locking. * - * This function copies at most @len bytes from the @from buffer into + * This function copies at most @n bytes from the @from buffer into * the FIFO depending on the free space, and returns the number of * bytes copied. */ @@ -227,7 +227,7 @@ static inline unsigned int kfifo_in_locked(struct kfifo *fifo, * @n: the size of the destination buffer. * @lock: pointer to the spinlock to use for locking. * - * This function copies at most @len bytes from the FIFO into the + * This function copies at most @n bytes from the FIFO into the * @to buffer and returns the number of copied bytes. */ static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo, diff --git a/include/linux/kobj_map.h b/include/linux/kobj_map.h index 73717ed9ea79..18ca75ffcc5a 100644 --- a/include/linux/kobj_map.h +++ b/include/linux/kobj_map.h @@ -1,3 +1,10 @@ +/* + * kobj_map.h + */ + +#ifndef _KOBJ_MAP_H_ +#define _KOBJ_MAP_H_ + #include <linux/mutex.h> typedef struct kobject *kobj_probe_t(dev_t, int *, void *); @@ -8,3 +15,5 @@ int kobj_map(struct kobj_map *, dev_t, unsigned long, struct module *, void kobj_unmap(struct kobj_map *, dev_t, unsigned long); struct kobject *kobj_lookup(struct kobj_map *, dev_t, int *); struct kobj_map *kobj_map_init(kobj_probe_t *, struct mutex *); + +#endif /* _KOBJ_MAP_H_ */ diff --git a/include/linux/kref.h b/include/linux/kref.h index b0cb0ebad9e6..baf4b9e4b194 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -1,5 +1,5 @@ /* - * kref.c - library routines for handling generic reference counted objects + * kref.h - library routines for handling generic reference counted objects * * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> * Copyright (C) 2004 IBM Corp. diff --git a/include/linux/rtc-v3020.h b/include/linux/rtc-v3020.h index 8ba646e610d9..e55d82cebf80 100644 --- a/include/linux/rtc-v3020.h +++ b/include/linux/rtc-v3020.h @@ -15,7 +15,7 @@ struct v3020_platform_data { int leftshift; /* (1<<(leftshift)) & readl() */ - int use_gpio:1; + unsigned int use_gpio:1; unsigned int gpio_cs; unsigned int gpio_wr; unsigned int gpio_rd; diff --git a/kernel/cgroup.c b/kernel/cgroup.c index e9ec642932ee..291775021b2e 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -3615,7 +3615,7 @@ static void __init cgroup_init_subsys(struct cgroup_subsys *ss) * @ss: the subsystem to load * * This function should be called in a modular subsystem's initcall. If the - * subsytem is built as a module, it will be assigned a new subsys_id and set + * subsystem is built as a module, it will be assigned a new subsys_id and set * up for use. If the subsystem is built-in anyway, work is delegated to the * simpler cgroup_init_subsys. */ diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 8a79a6f0f029..c8569bc298ff 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1438,7 +1438,7 @@ static void drain_local_stock(struct work_struct *dummy) /* * Cache charges(val) which is from res_counter, to local per_cpu area. - * This will be consumed by consumt_stock() function, later. + * This will be consumed by consume_stock() function, later. */ static void refill_stock(struct mem_cgroup *mem, int val) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d03c946d5566..a6326c71b663 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2579,7 +2579,7 @@ static int default_zonelist_order(void) struct zone *z; int average_size; /* - * ZONE_DMA and ZONE_DMA32 can be very small area in the sytem. + * ZONE_DMA and ZONE_DMA32 can be very small area in the system. * If they are really small and used heavily, the system can fall * into OOM very easily. * This function detect ZONE_DMA/DMA32 size and confgigures zone order. diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index ec19a890c9a0..82aa9c9e4edb 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -22,7 +22,7 @@ * overflow. * Carlos Picoto : PIMv1 Support * Pavlin Ivanov Radoslavov: PIMv2 Registers must checksum only PIM header - * Relax this requrement to work with older peers. + * Relax this requirement to work with older peers. * */ diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c index e978c7136c97..2609e445fe7d 100644 --- a/net/wimax/op-rfkill.c +++ b/net/wimax/op-rfkill.c @@ -43,7 +43,7 @@ * wimax_rfkill() Kernel calling wimax_rfkill() * __wimax_rf_toggle_radio() * - * wimax_rfkill_set_radio_block() RF-Kill subsytem calling + * wimax_rfkill_set_radio_block() RF-Kill subsystem calling * __wimax_rf_toggle_radio() * * __wimax_rf_toggle_radio() diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c index b6b2a46af14c..25d1ec4ca28a 100644 --- a/scripts/kconfig/util.c +++ b/scripts/kconfig/util.c @@ -72,7 +72,7 @@ int file_write_dep(const char *name) } -/* Allocate initial growable sting */ +/* Allocate initial growable string */ struct gstr str_new(void) { struct gstr gs; diff --git a/scripts/package/mkspec b/scripts/package/mkspec index 47bdd2f99b78..fa27f3dac769 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -1,6 +1,6 @@ #!/bin/sh # -# Output a simple RPM spec file that uses no fancy features requring +# Output a simple RPM spec file that uses no fancy features requiring # RPM v4. This is intended to work with any RPM distro. # # The only gothic bit here is redefining install_post to avoid diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index f18bd6207c50..66c7fb3ced3e 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1787,7 +1787,7 @@ int __devinit snd_emu10k1_create(struct snd_card *card, else if (subsystem) snd_printdd("Sound card name = %s, " "vendor = 0x%x, device = 0x%x, subsystem = 0x%x. " - "Forced to subsytem = 0x%x\n", c->name, + "Forced to subsystem = 0x%x\n", c->name, pci->vendor, pci->device, emu->serial, c->subsystem); else snd_printdd("Sound card name = %s, " diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 7cee364976ff..7a97f126f6f7 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -361,7 +361,7 @@ struct hda_bus_unsolicited { }; /* - * Helper for automatic ping configuration + * Helper for automatic pin configuration */ enum { |