diff options
39 files changed, 1530 insertions, 2729 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index aad527b357a0..523341a0e113 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -2,11 +2,21 @@ (CSPI/eCSPI) for i.MX Required properties: -- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi" +- compatible : + - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1 + - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21 + - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27 + - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31 + - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 + - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - fsl,spi-num-chipselects : Contains the number of the chipselect - cs-gpios : Specifies the gpio pins to be used for chipselects. +- clocks : Clock specifiers for both ipg and per clocks. +- clock-names : Clock names should include both "ipg" and "per" +See the clock consumer binding, + Documentation/devicetree/bindings/clock/clock-bindings.txt - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt index e2c88df2cc15..5c090771c016 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt @@ -33,6 +33,11 @@ Optional properties: nodes. If unspecified, a single SPI device without a chip select can be used. +- dmas: Two DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt +- dma-names: Names for the dma channels, if present. There must be at + least one channel named "tx" for transmit and named "rx" for + receive. SPI slave nodes must be children of the SPI master node and can contain properties described in Documentation/devicetree/bindings/spi/spi-bus.txt @@ -51,6 +56,9 @@ Example: clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; pinctrl-0 = <&spi8_default>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index cbbe16ed3874..70af78a9185e 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -16,6 +16,12 @@ Optional property: in big endian mode, otherwise in native mode(same with CPU), for more detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. +Optional SPI slave node properties: +- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip + select and the start of clock signal, at the start of a transfer. +- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock + signal and deactivating chip select, at the end of a transfer. + Example: dspi0@4002c000 { @@ -43,6 +49,8 @@ dspi0@4002c000 { reg = <0>; linux,modalias = "m25p80"; modal = "at26df081a"; + fsl,spi-cs-sck-delay = <100>; + fsl,spi-sck-cs-delay = <50>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt index c7dd50fb8eb2..e02fbf18c82c 100644 --- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt +++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt @@ -14,6 +14,7 @@ Required properties: - dma-names: Must include the following entries: - rx - tx +- cs-gpios: Must specify the GPIOs used for chipselect lines. - #address-cells: Must be 1. - #size-cells: Must be 0. diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 467dec441c62..0c491bda4c65 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -24,6 +24,9 @@ Optional Properties: - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. +- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling + Rx data (may need to be fine tuned for high capacitance lines). + No delay (0) by default. Example: @@ -33,6 +36,7 @@ Example: reg = <0xff110000 0x1000>; dmas = <&pdma1 11>, <&pdma1 12>; dma-names = "tx", "rx"; + rx-sample-delay-ns = <10>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index d29734bff28c..d1824b399b2d 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers: .driver = { .name = "CHIP", .owner = THIS_MODULE, + .pm = &CHIP_pm_ops, }, .probe = CHIP_probe, .remove = CHIP_remove, - .suspend = CHIP_suspend, - .resume = CHIP_resume, }; The driver core will automatically attempt to bind this driver to any SPI diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 3a2f9d59edab..94f574b0fdb2 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -15,6 +15,7 @@ #include <unistd.h> #include <stdio.h> #include <stdlib.h> +#include <string.h> #include <getopt.h> #include <fcntl.h> #include <sys/ioctl.h> @@ -34,24 +35,79 @@ static uint32_t mode; static uint8_t bits = 8; static uint32_t speed = 500000; static uint16_t delay; +static int verbose; -static void transfer(int fd) +uint8_t default_tx[] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0x0D, +}; + +uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; +char *input_tx; + +static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) +{ + int i = 0; + const unsigned char *address = src; + const unsigned char *line = address; + unsigned char c; + + printf("%s | ", prefix); + while (length-- > 0) { + printf("%02X ", *address++); + if (!(++i % line_size) || (length == 0 && i % line_size)) { + if (length == 0) { + while (i++ % line_size) + printf("__ "); + } + printf(" | "); /* right close */ + while (line < address) { + c = *line++; + printf("%c", (c < 33 || c == 255) ? 0x2E : c); + } + printf("\n"); + if (length > 0) + printf("%s | ", prefix); + } + } +} + +/* + * Unescape - process hexadecimal escape character + * converts shell input "\x23" -> 0x23 + */ +int unespcape(char *_dst, char *_src, size_t len) +{ + int ret = 0; + char *src = _src; + char *dst = _dst; + unsigned int ch; + + while (*src) { + if (*src == '\\' && *(src+1) == 'x') { + sscanf(src + 2, "%2x", &ch); + src += 4; + *dst++ = (unsigned char)ch; + } else { + *dst++ = *src++; + } + ret++; + } + return ret; +} + +static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) { int ret; - uint8_t tx[] = { - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xDE, 0xAD, 0xBE, 0xEF, 0xBA, 0xAD, - 0xF0, 0x0D, - }; - uint8_t rx[ARRAY_SIZE(tx)] = {0, }; + struct spi_ioc_transfer tr = { .tx_buf = (unsigned long)tx, .rx_buf = (unsigned long)rx, - .len = ARRAY_SIZE(tx), + .len = len, .delay_usecs = delay, .speed_hz = speed, .bits_per_word = bits, @@ -76,12 +132,9 @@ static void transfer(int fd) if (ret < 1) pabort("can't send spi message"); - for (ret = 0; ret < ARRAY_SIZE(tx); ret++) { - if (!(ret % 6)) - puts(""); - printf("%.2X ", rx[ret]); - } - puts(""); + if (verbose) + hex_dump(tx, len, 32, "TX"); + hex_dump(rx, len, 32, "RX"); } static void print_usage(const char *prog) @@ -97,6 +150,8 @@ static void print_usage(const char *prog) " -L --lsb least significant bit first\n" " -C --cs-high chip select active high\n" " -3 --3wire SI/SO signals shared\n" + " -v --verbose Verbose (show tx buffer)\n" + " -p Send data (e.g. \"1234\\xde\\xad\")\n" " -N --no-cs no chip select\n" " -R --ready slave pulls low to pause\n" " -2 --dual dual transfer\n" @@ -121,12 +176,13 @@ static void parse_opts(int argc, char *argv[]) { "no-cs", 0, 0, 'N' }, { "ready", 0, 0, 'R' }, { "dual", 0, 0, '2' }, + { "verbose", 0, 0, 'v' }, { "quad", 0, 0, '4' }, { NULL, 0, 0, 0 }, }; int c; - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL); + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); if (c == -1) break; @@ -165,9 +221,15 @@ static void parse_opts(int argc, char *argv[]) case 'N': mode |= SPI_NO_CS; break; + case 'v': + verbose = 1; + break; case 'R': mode |= SPI_READY; break; + case 'p': + input_tx = optarg; + break; case '2': mode |= SPI_TX_DUAL; break; @@ -191,6 +253,9 @@ int main(int argc, char *argv[]) { int ret = 0; int fd; + uint8_t *tx; + uint8_t *rx; + int size; parse_opts(argc, argv); @@ -235,7 +300,17 @@ int main(int argc, char *argv[]) printf("bits per word: %d\n", bits); printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - transfer(fd); + if (input_tx) { + size = strlen(input_tx+1); + tx = malloc(size); + rx = malloc(size); + size = unespcape((char *)tx, input_tx, size); + transfer(fd, tx, rx, size); + free(rx); + free(tx); + } else { + transfer(fd, default_tx, default_rx, sizeof(default_tx)); + } close(fd); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index a874b6ec6650..942ca541dcbd 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -51,19 +51,6 @@ config INTEL_MIC_X100_DMA OS and tools for MIC to use with this driver are available from <http://software.intel.com/en-us/mic-developer>. -config INTEL_MID_DMAC - tristate "Intel MID DMA support for Peripheral DMA controllers" - depends on PCI && X86 - select DMA_ENGINE - default n - help - Enable support for the Intel(R) MID DMA engine present - in Intel MID chipsets. - - Say Y here if you have such a chipset. - - If unsure, say N. - config ASYNC_TX_ENABLE_CHANNEL_SWITCH bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index f915f61ec574..539d4825bd76 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o obj-$(CONFIG_DMA_ACPI) += acpi-dma.o obj-$(CONFIG_DMA_OF) += of-dma.o -obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o obj-$(CONFIG_DMATEST) += dmatest.o obj-$(CONFIG_INTEL_IOATDMA) += ioat/ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c deleted file mode 100644 index 5aaead9b56f7..000000000000 --- a/drivers/dma/intel_mid_dma.c +++ /dev/null @@ -1,1447 +0,0 @@ -/* - * intel_mid_dma.c - Intel Langwell DMA Drivers - * - * Copyright (C) 2008-10 Intel Corp - * Author: Vinod Koul <vinod.koul@intel.com> - * The driver design is based on dw_dmac driver - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * - */ -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/pm_runtime.h> -#include <linux/intel_mid_dma.h> -#include <linux/module.h> - -#include "dmaengine.h" - -#define MAX_CHAN 4 /*max ch across controllers*/ -#include "intel_mid_dma_regs.h" - -#define INTEL_MID_DMAC1_ID 0x0814 -#define INTEL_MID_DMAC2_ID 0x0813 -#define INTEL_MID_GP_DMAC2_ID 0x0827 -#define INTEL_MFLD_DMAC1_ID 0x0830 -#define LNW_PERIPHRAL_MASK_BASE 0xFFAE8008 -#define LNW_PERIPHRAL_MASK_SIZE 0x10 -#define LNW_PERIPHRAL_STATUS 0x0 -#define LNW_PERIPHRAL_MASK 0x8 - -struct intel_mid_dma_probe_info { - u8 max_chan; - u8 ch_base; - u16 block_size; - u32 pimr_mask; -}; - -#define INFO(_max_chan, _ch_base, _block_size, _pimr_mask) \ - ((kernel_ulong_t)&(struct intel_mid_dma_probe_info) { \ - .max_chan = (_max_chan), \ - .ch_base = (_ch_base), \ - .block_size = (_block_size), \ - .pimr_mask = (_pimr_mask), \ - }) - -/***************************************************************************** -Utility Functions*/ -/** - * get_ch_index - convert status to channel - * @status: status mask - * @base: dma ch base value - * - * Modify the status mask and return the channel index needing - * attention (or -1 if neither) - */ -static int get_ch_index(int *status, unsigned int base) -{ - int i; - for (i = 0; i < MAX_CHAN; i++) { - if (*status & (1 << (i + base))) { - *status = *status & ~(1 << (i + base)); - pr_debug("MDMA: index %d New status %x\n", i, *status); - return i; - } - } - return -1; -} - -/** - * get_block_ts - calculates dma transaction length - * @len: dma transfer length - * @tx_width: dma transfer src width - * @block_size: dma controller max block size - * - * Based on src width calculate the DMA trsaction length in data items - * return data items or FFFF if exceeds max length for block - */ -static int get_block_ts(int len, int tx_width, int block_size) -{ - int byte_width = 0, block_ts = 0; - - switch (tx_width) { - case DMA_SLAVE_BUSWIDTH_1_BYTE: - byte_width = 1; - break; - case DMA_SLAVE_BUSWIDTH_2_BYTES: - byte_width = 2; - break; - case DMA_SLAVE_BUSWIDTH_4_BYTES: - default: - byte_width = 4; - break; - } - - block_ts = len/byte_width; - if (block_ts > block_size) - block_ts = 0xFFFF; - return block_ts; -} - -/***************************************************************************** -DMAC1 interrupt Functions*/ - -/** - * dmac1_mask_periphral_intr - mask the periphral interrupt - * @mid: dma device for which masking is required - * - * Masks the DMA periphral interrupt - * this is valid for DMAC1 family controllers only - * This controller should have periphral mask registers already mapped - */ -static void dmac1_mask_periphral_intr(struct middma_device *mid) -{ - u32 pimr; - - if (mid->pimr_mask) { - pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK); - pimr |= mid->pimr_mask; - writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK); - } - return; -} - -/** - * dmac1_unmask_periphral_intr - unmask the periphral interrupt - * @midc: dma channel for which masking is required - * - * UnMasks the DMA periphral interrupt, - * this is valid for DMAC1 family controllers only - * This controller should have periphral mask registers already mapped - */ -static void dmac1_unmask_periphral_intr(struct intel_mid_dma_chan *midc) -{ - u32 pimr; - struct middma_device *mid = to_middma_device(midc->chan.device); - - if (mid->pimr_mask) { - pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK); - pimr &= ~mid->pimr_mask; - writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK); - } - return; -} - -/** - * enable_dma_interrupt - enable the periphral interrupt - * @midc: dma channel for which enable interrupt is required - * - * Enable the DMA periphral interrupt, - * this is valid for DMAC1 family controllers only - * This controller should have periphral mask registers already mapped - */ -static void enable_dma_interrupt(struct intel_mid_dma_chan *midc) -{ - dmac1_unmask_periphral_intr(midc); - - /*en ch interrupts*/ - iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR); - iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR); - return; -} - -/** - * disable_dma_interrupt - disable the periphral interrupt - * @midc: dma channel for which disable interrupt is required - * - * Disable the DMA periphral interrupt, - * this is valid for DMAC1 family controllers only - * This controller should have periphral mask registers already mapped - */ -static void disable_dma_interrupt(struct intel_mid_dma_chan *midc) -{ - /*Check LPE PISR, make sure fwd is disabled*/ - iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_BLOCK); - iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR); - iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR); - return; -} - -/***************************************************************************** -DMA channel helper Functions*/ -/** - * mid_desc_get - get a descriptor - * @midc: dma channel for which descriptor is required - * - * Obtain a descriptor for the channel. Returns NULL if none are free. - * Once the descriptor is returned it is private until put on another - * list or freed - */ -static struct intel_mid_dma_desc *midc_desc_get(struct intel_mid_dma_chan *midc) -{ - struct intel_mid_dma_desc *desc, *_desc; - struct intel_mid_dma_desc *ret = NULL; - - spin_lock_bh(&midc->lock); - list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) { - if (async_tx_test_ack(&desc->txd)) { - list_del(&desc->desc_node); - ret = desc; - break; - } - } - spin_unlock_bh(&midc->lock); - return ret; -} - -/** - * mid_desc_put - put a descriptor - * @midc: dma channel for which descriptor is required - * @desc: descriptor to put - * - * Return a descriptor from lwn_desc_get back to the free pool - */ -static void midc_desc_put(struct intel_mid_dma_chan *midc, - struct intel_mid_dma_desc *desc) -{ - if (desc) { - spin_lock_bh(&midc->lock); - list_add_tail(&desc->desc_node, &midc->free_list); - spin_unlock_bh(&midc->lock); - } -} -/** - * midc_dostart - begin a DMA transaction - * @midc: channel for which txn is to be started - * @first: first descriptor of series - * - * Load a transaction into the engine. This must be called with midc->lock - * held and bh disabled. - */ -static void midc_dostart(struct intel_mid_dma_chan *midc, - struct intel_mid_dma_desc *first) -{ - struct middma_device *mid = to_middma_device(midc->chan.device); - - /* channel is idle */ - if (midc->busy && test_ch_en(midc->dma_base, midc->ch_id)) { - /*error*/ - pr_err("ERR_MDMA: channel is busy in start\n"); - /* The tasklet will hopefully advance the queue... */ - return; - } - midc->busy = true; - /*write registers and en*/ - iowrite32(first->sar, midc->ch_regs + SAR); - iowrite32(first->dar, midc->ch_regs + DAR); - iowrite32(first->lli_phys, midc->ch_regs + LLP); - iowrite32(first->cfg_hi, midc->ch_regs + CFG_HIGH); - iowrite32(first->cfg_lo, midc->ch_regs + CFG_LOW); - iowrite32(first->ctl_lo, midc->ch_regs + CTL_LOW); - iowrite32(first->ctl_hi, midc->ch_regs + CTL_HIGH); - pr_debug("MDMA:TX SAR %x,DAR %x,CFGL %x,CFGH %x,CTLH %x, CTLL %x\n", - (int)first->sar, (int)first->dar, first->cfg_hi, - first->cfg_lo, first->ctl_hi, first->ctl_lo); - first->status = DMA_IN_PROGRESS; - - iowrite32(ENABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN); -} - -/** - * midc_descriptor_complete - process completed descriptor - * @midc: channel owning the descriptor - * @desc: the descriptor itself - * - * Process a completed descriptor and perform any callbacks upon - * the completion. The completion handling drops the lock during the - * callbacks but must be called with the lock held. - */ -static void midc_descriptor_complete(struct intel_mid_dma_chan *midc, - struct intel_mid_dma_desc *desc) - __releases(&midc->lock) __acquires(&midc->lock) -{ - struct dma_async_tx_descriptor *txd = &desc->txd; - dma_async_tx_callback callback_txd = NULL; - struct intel_mid_dma_lli *llitem; - void *param_txd = NULL; - - dma_cookie_complete(txd); - callback_txd = txd->callback; - param_txd = txd->callback_param; - - if (desc->lli != NULL) { - /*clear the DONE bit of completed LLI in memory*/ - llitem = desc->lli + desc->current_lli; - llitem->ctl_hi &= CLEAR_DONE; - if (desc->current_lli < desc->lli_length-1) - (desc->current_lli)++; - else - desc->current_lli = 0; - } - spin_unlock_bh(&midc->lock); - if (callback_txd) { - pr_debug("MDMA: TXD callback set ... calling\n"); - callback_txd(param_txd); - } - if (midc->raw_tfr) { - desc->status = DMA_COMPLETE; - if (desc->lli != NULL) { - pci_pool_free(desc->lli_pool, desc->lli, - desc->lli_phys); - pci_pool_destroy(desc->lli_pool); - desc->lli = NULL; - } - list_move(&desc->desc_node, &midc->free_list); - midc->busy = false; - } - spin_lock_bh(&midc->lock); - -} -/** - * midc_scan_descriptors - check the descriptors in channel - * mark completed when tx is completete - * @mid: device - * @midc: channel to scan - * - * Walk the descriptor chain for the device and process any entries - * that are complete. - */ -static void midc_scan_descriptors(struct middma_device *mid, - struct intel_mid_dma_chan *midc) -{ - struct intel_mid_dma_desc *desc = NULL, *_desc = NULL; - - /*tx is complete*/ - list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) { - if (desc->status == DMA_IN_PROGRESS) - midc_descriptor_complete(midc, desc); - } - return; - } -/** - * midc_lli_fill_sg - Helper function to convert - * SG list to Linked List Items. - *@midc: Channel - *@desc: DMA descriptor - *@sglist: Pointer to SG list - *@sglen: SG list length - *@flags: DMA transaction flags - * - * Walk through the SG list and convert the SG list into Linked - * List Items (LLI). - */ -static int midc_lli_fill_sg(struct intel_mid_dma_chan *midc, - struct intel_mid_dma_desc *desc, - struct scatterlist *sglist, - unsigned int sglen, - unsigned int flags) -{ - struct intel_mid_dma_slave *mids; - struct scatterlist *sg; - dma_addr_t lli_next, sg_phy_addr; - struct intel_mid_dma_lli *lli_bloc_desc; - union intel_mid_dma_ctl_lo ctl_lo; - union intel_mid_dma_ctl_hi ctl_hi; - int i; - - pr_debug("MDMA: Entered midc_lli_fill_sg\n"); - mids = midc->mid_slave; - - lli_bloc_desc = desc->lli; - lli_next = desc->lli_phys; - - ctl_lo.ctl_lo = desc->ctl_lo; - ctl_hi.ctl_hi = desc->ctl_hi; - for_each_sg(sglist, sg, sglen, i) { - /*Populate CTL_LOW and LLI values*/ - if (i != sglen - 1) { - lli_next = lli_next + - sizeof(struct intel_mid_dma_lli); - } else { - /*Check for circular list, otherwise terminate LLI to ZERO*/ - if (flags & DMA_PREP_CIRCULAR_LIST) { - pr_debug("MDMA: LLI is configured in circular mode\n"); - lli_next = desc->lli_phys; - } else { - lli_next = 0; - ctl_lo.ctlx.llp_dst_en = 0; - ctl_lo.ctlx.llp_src_en = 0; - } - } - /*Populate CTL_HI values*/ - ctl_hi.ctlx.block_ts = get_block_ts(sg_dma_len(sg), - desc->width, - midc->dma->block_size); - /*Populate SAR and DAR values*/ - sg_phy_addr = sg_dma_address(sg); - if (desc->dirn == DMA_MEM_TO_DEV) { - lli_bloc_desc->sar = sg_phy_addr; - lli_bloc_desc->dar = mids->dma_slave.dst_addr; - } else if (desc->dirn == DMA_DEV_TO_MEM) { - lli_bloc_desc->sar = mids->dma_slave.src_addr; - lli_bloc_desc->dar = sg_phy_addr; - } - /*Copy values into block descriptor in system memroy*/ - lli_bloc_desc->llp = lli_next; - lli_bloc_desc->ctl_lo = ctl_lo.ctl_lo; - lli_bloc_desc->ctl_hi = ctl_hi.ctl_hi; - - lli_bloc_desc++; - } - /*Copy very first LLI values to descriptor*/ - desc->ctl_lo = desc->lli->ctl_lo; - desc->ctl_hi = desc->lli->ctl_hi; - desc->sar = desc->lli->sar; - desc->dar = desc->lli->dar; - - return 0; -} -/***************************************************************************** -DMA engine callback Functions*/ -/** - * intel_mid_dma_tx_submit - callback to submit DMA transaction - * @tx: dma engine descriptor - * - * Submit the DMA transaction for this descriptor, start if ch idle - */ -static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx) -{ - struct intel_mid_dma_desc *desc = to_intel_mid_dma_desc(tx); - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(tx->chan); - dma_cookie_t cookie; - - spin_lock_bh(&midc->lock); - cookie = dma_cookie_assign(tx); - - if (list_empty(&midc->active_list)) - list_add_tail(&desc->desc_node, &midc->active_list); - else - list_add_tail(&desc->desc_node, &midc->queue); - - midc_dostart(midc, desc); - spin_unlock_bh(&midc->lock); - - return cookie; -} - -/** - * intel_mid_dma_issue_pending - callback to issue pending txn - * @chan: chan where pending trascation needs to be checked and submitted - * - * Call for scan to issue pending descriptors - */ -static void intel_mid_dma_issue_pending(struct dma_chan *chan) -{ - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - - spin_lock_bh(&midc->lock); - if (!list_empty(&midc->queue)) - midc_scan_descriptors(to_middma_device(chan->device), midc); - spin_unlock_bh(&midc->lock); -} - -/** - * intel_mid_dma_tx_status - Return status of txn - * @chan: chan for where status needs to be checked - * @cookie: cookie for txn - * @txstate: DMA txn state - * - * Return status of DMA txn - */ -static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan, - dma_cookie_t cookie, - struct dma_tx_state *txstate) -{ - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - enum dma_status ret; - - ret = dma_cookie_status(chan, cookie, txstate); - if (ret != DMA_COMPLETE) { - spin_lock_bh(&midc->lock); - midc_scan_descriptors(to_middma_device(chan->device), midc); - spin_unlock_bh(&midc->lock); - - ret = dma_cookie_status(chan, cookie, txstate); - } - - return ret; -} - -static int intel_mid_dma_config(struct dma_chan *chan, - struct dma_slave_config *slave) -{ - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - struct intel_mid_dma_slave *mid_slave; - - BUG_ON(!midc); - BUG_ON(!slave); - pr_debug("MDMA: slave control called\n"); - - mid_slave = to_intel_mid_dma_slave(slave); - - BUG_ON(!mid_slave); - - midc->mid_slave = mid_slave; - return 0; -} - -static int intel_mid_dma_terminate_all(struct dma_chan *chan) -{ - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - struct middma_device *mid = to_middma_device(chan->device); - struct intel_mid_dma_desc *desc, *_desc; - union intel_mid_dma_cfg_lo cfg_lo; - - spin_lock_bh(&midc->lock); - if (midc->busy == false) { - spin_unlock_bh(&midc->lock); - return 0; - } - /*Suspend and disable the channel*/ - cfg_lo.cfg_lo = ioread32(midc->ch_regs + CFG_LOW); - cfg_lo.cfgx.ch_susp = 1; - iowrite32(cfg_lo.cfg_lo, midc->ch_regs + CFG_LOW); - iowrite32(DISABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN); - midc->busy = false; - /* Disable interrupts */ - disable_dma_interrupt(midc); - midc->descs_allocated = 0; - - spin_unlock_bh(&midc->lock); - list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) { - if (desc->lli != NULL) { - pci_pool_free(desc->lli_pool, desc->lli, - desc->lli_phys); - pci_pool_destroy(desc->lli_pool); - desc->lli = NULL; - } - list_move(&desc->desc_node, &midc->free_list); - } - return 0; -} - - -/** - * intel_mid_dma_prep_memcpy - Prep memcpy txn - * @chan: chan for DMA transfer - * @dest: destn address - * @src: src address - * @len: DMA transfer len - * @flags: DMA flags - * - * Perform a DMA memcpy. Note we support slave periphral DMA transfers only - * The periphral txn details should be filled in slave structure properly - * Returns the descriptor for this txn - */ -static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy( - struct dma_chan *chan, dma_addr_t dest, - dma_addr_t src, size_t len, unsigned long flags) -{ - struct intel_mid_dma_chan *midc; - struct intel_mid_dma_desc *desc = NULL; - struct intel_mid_dma_slave *mids; - union intel_mid_dma_ctl_lo ctl_lo; - union intel_mid_dma_ctl_hi ctl_hi; - union intel_mid_dma_cfg_lo cfg_lo; - union intel_mid_dma_cfg_hi cfg_hi; - enum dma_slave_buswidth width; - - pr_debug("MDMA: Prep for memcpy\n"); - BUG_ON(!chan); - if (!len) - return NULL; - - midc = to_intel_mid_dma_chan(chan); - BUG_ON(!midc); - - mids = midc->mid_slave; - BUG_ON(!mids); - - pr_debug("MDMA:called for DMA %x CH %d Length %zu\n", - midc->dma->pci_id, midc->ch_id, len); - pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n", - mids->cfg_mode, mids->dma_slave.direction, - mids->hs_mode, mids->dma_slave.src_addr_width); - - /*calculate CFG_LO*/ - if (mids->hs_mode == LNW_DMA_SW_HS) { - cfg_lo.cfg_lo = 0; - cfg_lo.cfgx.hs_sel_dst = 1; - cfg_lo.cfgx.hs_sel_src = 1; - } else if (mids->hs_mode == LNW_DMA_HW_HS) - cfg_lo.cfg_lo = 0x00000; - - /*calculate CFG_HI*/ - if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) { - /*SW HS only*/ - cfg_hi.cfg_hi = 0; - } else { - cfg_hi.cfg_hi = 0; - if (midc->dma->pimr_mask) { - cfg_hi.cfgx.protctl = 0x0; /*default value*/ - cfg_hi.cfgx.fifo_mode = 1; - if (mids->dma_slave.direction == DMA_MEM_TO_DEV) { - cfg_hi.cfgx.src_per = 0; - if (mids->device_instance == 0) - cfg_hi.cfgx.dst_per = 3; - if (mids->device_instance == 1) - cfg_hi.cfgx.dst_per = 1; - } else if (mids->dma_slave.direction == DMA_DEV_TO_MEM) { - if (mids->device_instance == 0) - cfg_hi.cfgx.src_per = 2; - if (mids->device_instance == 1) - cfg_hi.cfgx.src_per = 0; - cfg_hi.cfgx.dst_per = 0; - } - } else { - cfg_hi.cfgx.protctl = 0x1; /*default value*/ - cfg_hi.cfgx.src_per = cfg_hi.cfgx.dst_per = - midc->ch_id - midc->dma->chan_base; - } - } - - /*calculate CTL_HI*/ - ctl_hi.ctlx.reser = 0; - ctl_hi.ctlx.done = 0; - width = mids->dma_slave.src_addr_width; - - ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size); - pr_debug("MDMA:calc len %d for block size %d\n", - ctl_hi.ctlx.block_ts, midc->dma->block_size); - /*calculate CTL_LO*/ - ctl_lo.ctl_lo = 0; - ctl_lo.ctlx.int_en = 1; - ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst; - ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst; - - /* - * Here we need some translation from "enum dma_slave_buswidth" - * to the format for our dma controller - * standard intel_mid_dmac's format - * 1 Byte 0b000 - * 2 Bytes 0b001 - * 4 Bytes 0b010 - */ - ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width / 2; - ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width / 2; - - if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) { - ctl_lo.ctlx.tt_fc = 0; - ctl_lo.ctlx.sinc = 0; - ctl_lo.ctlx.dinc = 0; - } else { - if (mids->dma_slave.direction == DMA_MEM_TO_DEV) { - ctl_lo.ctlx.sinc = 0; - ctl_lo.ctlx.dinc = 2; - ctl_lo.ctlx.tt_fc = 1; - } else if (mids->dma_slave.direction == DMA_DEV_TO_MEM) { - ctl_lo.ctlx.sinc = 2; - ctl_lo.ctlx.dinc = 0; - ctl_lo.ctlx.tt_fc = 2; - } - } - - pr_debug("MDMA:Calc CTL LO %x, CTL HI %x, CFG LO %x, CFG HI %x\n", - ctl_lo.ctl_lo, ctl_hi.ctl_hi, cfg_lo.cfg_lo, cfg_hi.cfg_hi); - - enable_dma_interrupt(midc); - - desc = midc_desc_get(midc); - if (desc == NULL) - goto err_desc_get; - desc->sar = src; - desc->dar = dest ; - desc->len = len; - desc->cfg_hi = cfg_hi.cfg_hi; - desc->cfg_lo = cfg_lo.cfg_lo; - desc->ctl_lo = ctl_lo.ctl_lo; - desc->ctl_hi = ctl_hi.ctl_hi; - desc->width = width; - desc->dirn = mids->dma_slave.direction; - desc->lli_phys = 0; - desc->lli = NULL; - desc->lli_pool = NULL; - return &desc->txd; - -err_desc_get: - pr_err("ERR_MDMA: Failed to get desc\n"); - midc_desc_put(midc, desc); - return NULL; -} -/** - * intel_mid_dma_prep_slave_sg - Prep slave sg txn - * @chan: chan for DMA transfer - * @sgl: scatter gather list - * @sg_len: length of sg txn - * @direction: DMA transfer dirtn - * @flags: DMA flags - * @context: transfer context (ignored) - * - * Prepares LLI based periphral transfer - */ -static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( - struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) -{ - struct intel_mid_dma_chan *midc = NULL; - struct intel_mid_dma_slave *mids = NULL; - struct intel_mid_dma_desc *desc = NULL; - struct dma_async_tx_descriptor *txd = NULL; - union intel_mid_dma_ctl_lo ctl_lo; - - pr_debug("MDMA: Prep for slave SG\n"); - - if (!sg_len) { - pr_err("MDMA: Invalid SG length\n"); - return NULL; - } - midc = to_intel_mid_dma_chan(chan); - BUG_ON(!midc); - - mids = midc->mid_slave; - BUG_ON(!mids); - - if (!midc->dma->pimr_mask) { - /* We can still handle sg list with only one item */ - if (sg_len == 1) { - txd = intel_mid_dma_prep_memcpy(chan, - mids->dma_slave.dst_addr, - mids->dma_slave.src_addr, - sg_dma_len(sgl), - flags); - return txd; - } else { - pr_warn("MDMA: SG list is not supported by this controller\n"); - return NULL; - } - } - - pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n", - sg_len, direction, flags); - - txd = intel_mid_dma_prep_memcpy(chan, 0, 0, sg_dma_len(sgl), flags); - if (NULL == txd) { - pr_err("MDMA: Prep memcpy failed\n"); - return NULL; - } - - desc = to_intel_mid_dma_desc(txd); - desc->dirn = direction; - ctl_lo.ctl_lo = desc->ctl_lo; - ctl_lo.ctlx.llp_dst_en = 1; - ctl_lo.ctlx.llp_src_en = 1; - desc->ctl_lo = ctl_lo.ctl_lo; - desc->lli_length = sg_len; - desc->current_lli = 0; - /* DMA coherent memory pool for LLI descriptors*/ - desc->lli_pool = pci_pool_create("intel_mid_dma_lli_pool", - midc->dma->pdev, - (sizeof(struct intel_mid_dma_lli)*sg_len), - 32, 0); - if (NULL == desc->lli_pool) { - pr_err("MID_DMA:LLI pool create failed\n"); - return NULL; - } - - desc->lli = pci_pool_alloc(desc->lli_pool, GFP_KERNEL, &desc->lli_phys); - if (!desc->lli) { - pr_err("MID_DMA: LLI alloc failed\n"); - pci_pool_destroy(desc->lli_pool); - return NULL; - } - - midc_lli_fill_sg(midc, desc, sgl, sg_len, flags); - if (flags & DMA_PREP_INTERRUPT) { - iowrite32(UNMASK_INTR_REG(midc->ch_id), - midc->dma_base + MASK_BLOCK); - pr_debug("MDMA:Enabled Block interrupt\n"); - } - return &desc->txd; -} - -/** - * intel_mid_dma_free_chan_resources - Frees dma resources - * @chan: chan requiring attention - * - * Frees the allocated resources on this DMA chan - */ -static void intel_mid_dma_free_chan_resources(struct dma_chan *chan) -{ - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - struct middma_device *mid = to_middma_device(chan->device); - struct intel_mid_dma_desc *desc, *_desc; - - if (true == midc->busy) { - /*trying to free ch in use!!!!!*/ - pr_err("ERR_MDMA: trying to free ch in use\n"); - } - spin_lock_bh(&midc->lock); - midc->descs_allocated = 0; - list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) { - list_del(&desc->desc_node); - pci_pool_free(mid->dma_pool, desc, desc->txd.phys); - } - list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) { - list_del(&desc->desc_node); - pci_pool_free(mid->dma_pool, desc, desc->txd.phys); - } - list_for_each_entry_safe(desc, _desc, &midc->queue, desc_node) { - list_del(&desc->desc_node); - pci_pool_free(mid->dma_pool, desc, desc->txd.phys); - } - spin_unlock_bh(&midc->lock); - midc->in_use = false; - midc->busy = false; - /* Disable CH interrupts */ - iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK); - iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR); - pm_runtime_put(&mid->pdev->dev); -} - -/** - * intel_mid_dma_alloc_chan_resources - Allocate dma resources - * @chan: chan requiring attention - * - * Allocates DMA resources on this chan - * Return the descriptors allocated - */ -static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan) -{ - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - struct middma_device *mid = to_middma_device(chan->device); - struct intel_mid_dma_desc *desc; - dma_addr_t phys; - int i = 0; - - pm_runtime_get_sync(&mid->pdev->dev); - - if (mid->state == SUSPENDED) { - if (dma_resume(&mid->pdev->dev)) { - pr_err("ERR_MDMA: resume failed"); - return -EFAULT; - } - } - - /* ASSERT: channel is idle */ - if (test_ch_en(mid->dma_base, midc->ch_id)) { - /*ch is not idle*/ - pr_err("ERR_MDMA: ch not idle\n"); - pm_runtime_put(&mid->pdev->dev); - return -EIO; - } - dma_cookie_init(chan); - - spin_lock_bh(&midc->lock); - while (midc->descs_allocated < DESCS_PER_CHANNEL) { - spin_unlock_bh(&midc->lock); - desc = pci_pool_alloc(mid->dma_pool, GFP_KERNEL, &phys); - if (!desc) { - pr_err("ERR_MDMA: desc failed\n"); - pm_runtime_put(&mid->pdev->dev); - return -ENOMEM; - /*check*/ - } - dma_async_tx_descriptor_init(&desc->txd, chan); - desc->txd.tx_submit = intel_mid_dma_tx_submit; - desc->txd.flags = DMA_CTRL_ACK; - desc->txd.phys = phys; - spin_lock_bh(&midc->lock); - i = ++midc->descs_allocated; - list_add_tail(&desc->desc_node, &midc->free_list); - } - spin_unlock_bh(&midc->lock); - midc->in_use = true; - midc->busy = false; - pr_debug("MID_DMA: Desc alloc done ret: %d desc\n", i); - return i; -} - -/** - * midc_handle_error - Handle DMA txn error - * @mid: controller where error occurred - * @midc: chan where error occurred - * - * Scan the descriptor for error - */ -static void midc_handle_error(struct middma_device *mid, - struct intel_mid_dma_chan *midc) -{ - midc_scan_descriptors(mid, midc); -} - -/** - * dma_tasklet - DMA interrupt tasklet - * @data: tasklet arg (the controller structure) - * - * Scan the controller for interrupts for completion/error - * Clear the interrupt and call for handling completion/error - */ -static void dma_tasklet(unsigned long data) -{ - struct middma_device *mid = NULL; - struct intel_mid_dma_chan *midc = NULL; - u32 status, raw_tfr, raw_block; - int i; - - mid = (struct middma_device *)data; - if (mid == NULL) { - pr_err("ERR_MDMA: tasklet Null param\n"); - return; - } - pr_debug("MDMA: in tasklet for device %x\n", mid->pci_id); - raw_tfr = ioread32(mid->dma_base + RAW_TFR); - raw_block = ioread32(mid->dma_base + RAW_BLOCK); - status = raw_tfr | raw_block; - status &= mid->intr_mask; - while (status) { - /*txn interrupt*/ - i = get_ch_index(&status, mid->chan_base); - if (i < 0) { - pr_err("ERR_MDMA:Invalid ch index %x\n", i); - return; - } - midc = &mid->ch[i]; - if (midc == NULL) { - pr_err("ERR_MDMA:Null param midc\n"); - return; - } - pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n", - status, midc->ch_id, i); - midc->raw_tfr = raw_tfr; - midc->raw_block = raw_block; - spin_lock_bh(&midc->lock); - /*clearing this interrupts first*/ - iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_TFR); - if (raw_block) { - iowrite32((1 << midc->ch_id), - mid->dma_base + CLEAR_BLOCK); - } - midc_scan_descriptors(mid, midc); - pr_debug("MDMA:Scan of desc... complete, unmasking\n"); - iowrite32(UNMASK_INTR_REG(midc->ch_id), - mid->dma_base + MASK_TFR); - if (raw_block) { - iowrite32(UNMASK_INTR_REG(midc->ch_id), - mid->dma_base + MASK_BLOCK); - } - spin_unlock_bh(&midc->lock); - } - - status = ioread32(mid->dma_base + RAW_ERR); - status &= mid->intr_mask; - while (status) { - /*err interrupt*/ - i = get_ch_index(&status, mid->chan_base); - if (i < 0) { - pr_err("ERR_MDMA:Invalid ch index %x\n", i); - return; - } - midc = &mid->ch[i]; - if (midc == NULL) { - pr_err("ERR_MDMA:Null param midc\n"); - return; - } - pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n", - status, midc->ch_id, i); - - iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_ERR); - spin_lock_bh(&midc->lock); - midc_handle_error(mid, midc); - iowrite32(UNMASK_INTR_REG(midc->ch_id), - mid->dma_base + MASK_ERR); - spin_unlock_bh(&midc->lock); - } - pr_debug("MDMA:Exiting takslet...\n"); - return; -} - -static void dma_tasklet1(unsigned long data) -{ - pr_debug("MDMA:in takslet1...\n"); - return dma_tasklet(data); -} - -static void dma_tasklet2(unsigned long data) -{ - pr_debug("MDMA:in takslet2...\n"); - return dma_tasklet(data); -} - -/** - * intel_mid_dma_interrupt - DMA ISR - * @irq: IRQ where interrupt occurred - * @data: ISR cllback data (the controller structure) - * - * See if this is our interrupt if so then schedule the tasklet - * otherwise ignore - */ -static irqreturn_t intel_mid_dma_interrupt(int irq, void *data) -{ - struct middma_device *mid = data; - u32 tfr_status, err_status; - int call_tasklet = 0; - - tfr_status = ioread32(mid->dma_base + RAW_TFR); - err_status = ioread32(mid->dma_base + RAW_ERR); - if (!tfr_status && !err_status) - return IRQ_NONE; - - /*DMA Interrupt*/ - pr_debug("MDMA:Got an interrupt on irq %d\n", irq); - pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask); - tfr_status &= mid->intr_mask; - if (tfr_status) { - /*need to disable intr*/ - iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_TFR); - iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_BLOCK); - pr_debug("MDMA: Calling tasklet %x\n", tfr_status); - call_tasklet = 1; - } - err_status &= mid->intr_mask; - if (err_status) { - iowrite32((err_status << INT_MASK_WE), - mid->dma_base + MASK_ERR); - call_tasklet = 1; - } - if (call_tasklet) - tasklet_schedule(&mid->tasklet); - - return IRQ_HANDLED; -} - -static irqreturn_t intel_mid_dma_interrupt1(int irq, void *data) -{ - return intel_mid_dma_interrupt(irq, data); -} - -static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data) -{ - return intel_mid_dma_interrupt(irq, data); -} - -/** - * mid_setup_dma - Setup the DMA controller - * @pdev: Controller PCI device structure - * - * Initialize the DMA controller, channels, registers with DMA engine, - * ISR. Initialize DMA controller channels. - */ -static int mid_setup_dma(struct pci_dev *pdev) -{ - struct middma_device *dma = pci_get_drvdata(pdev); - int err, i; - - /* DMA coherent memory pool for DMA descriptor allocations */ - dma->dma_pool = pci_pool_create("intel_mid_dma_desc_pool", pdev, - sizeof(struct intel_mid_dma_desc), - 32, 0); - if (NULL == dma->dma_pool) { - pr_err("ERR_MDMA:pci_pool_create failed\n"); - err = -ENOMEM; - goto err_dma_pool; - } - - INIT_LIST_HEAD(&dma->common.channels); - dma->pci_id = pdev->device; - if (dma->pimr_mask) { - dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE, - LNW_PERIPHRAL_MASK_SIZE); - if (dma->mask_reg == NULL) { - pr_err("ERR_MDMA:Can't map periphral intr space !!\n"); - err = -ENOMEM; - goto err_ioremap; - } - } else - dma->mask_reg = NULL; - - pr_debug("MDMA:Adding %d channel for this controller\n", dma->max_chan); - /*init CH structures*/ - dma->intr_mask = 0; - dma->state = RUNNING; - for (i = 0; i < dma->max_chan; i++) { - struct intel_mid_dma_chan *midch = &dma->ch[i]; - - midch->chan.device = &dma->common; - dma_cookie_init(&midch->chan); - midch->ch_id = dma->chan_base + i; - pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id); - - midch->dma_base = dma->dma_base; - midch->ch_regs = dma->dma_base + DMA_CH_SIZE * midch->ch_id; - midch->dma = dma; - dma->intr_mask |= 1 << (dma->chan_base + i); - spin_lock_init(&midch->lock); - - INIT_LIST_HEAD(&midch->active_list); - INIT_LIST_HEAD(&midch->queue); - INIT_LIST_HEAD(&midch->free_list); - /*mask interrupts*/ - iowrite32(MASK_INTR_REG(midch->ch_id), - dma->dma_base + MASK_BLOCK); - iowrite32(MASK_INTR_REG(midch->ch_id), - dma->dma_base + MASK_SRC_TRAN); - iowrite32(MASK_INTR_REG(midch->ch_id), - dma->dma_base + MASK_DST_TRAN); - iowrite32(MASK_INTR_REG(midch->ch_id), - dma->dma_base + MASK_ERR); - iowrite32(MASK_INTR_REG(midch->ch_id), - dma->dma_base + MASK_TFR); - - disable_dma_interrupt(midch); - list_add_tail(&midch->chan.device_node, &dma->common.channels); - } - pr_debug("MDMA: Calc Mask as %x for this controller\n", dma->intr_mask); - - /*init dma structure*/ - dma_cap_zero(dma->common.cap_mask); - dma_cap_set(DMA_MEMCPY, dma->common.cap_mask); - dma_cap_set(DMA_SLAVE, dma->common.cap_mask); - dma_cap_set(DMA_PRIVATE, dma->common.cap_mask); - dma->common.dev = &pdev->dev; - - dma->common.device_alloc_chan_resources = - intel_mid_dma_alloc_chan_resources; - dma->common.device_free_chan_resources = - intel_mid_dma_free_chan_resources; - - dma->common.device_tx_status = intel_mid_dma_tx_status; - dma->common.device_prep_dma_memcpy = intel_mid_dma_prep_memcpy; - dma->common.device_issue_pending = intel_mid_dma_issue_pending; - dma->common.device_prep_slave_sg = intel_mid_dma_prep_slave_sg; - dma->common.device_config = intel_mid_dma_config; - dma->common.device_terminate_all = intel_mid_dma_terminate_all; - - /*enable dma cntrl*/ - iowrite32(REG_BIT0, dma->dma_base + DMA_CFG); - - /*register irq */ - if (dma->pimr_mask) { - pr_debug("MDMA:Requesting irq shared for DMAC1\n"); - err = request_irq(pdev->irq, intel_mid_dma_interrupt1, - IRQF_SHARED, "INTEL_MID_DMAC1", dma); - if (0 != err) - goto err_irq; - } else { - dma->intr_mask = 0x03; - pr_debug("MDMA:Requesting irq for DMAC2\n"); - err = request_irq(pdev->irq, intel_mid_dma_interrupt2, - IRQF_SHARED, "INTEL_MID_DMAC2", dma); - if (0 != err) - goto err_irq; - } - /*register device w/ engine*/ - err = dma_async_device_register(&dma->common); - if (0 != err) { - pr_err("ERR_MDMA:device_register failed: %d\n", err); - goto err_engine; - } - if (dma->pimr_mask) { - pr_debug("setting up tasklet1 for DMAC1\n"); - tasklet_init(&dma->tasklet, dma_tasklet1, (unsigned long)dma); - } else { - pr_debug("setting up tasklet2 for DMAC2\n"); - tasklet_init(&dma->tasklet, dma_tasklet2, (unsigned long)dma); - } - return 0; - -err_engine: - free_irq(pdev->irq, dma); -err_irq: - if (dma->mask_reg) - iounmap(dma->mask_reg); -err_ioremap: - pci_pool_destroy(dma->dma_pool); -err_dma_pool: - pr_err("ERR_MDMA:setup_dma failed: %d\n", err); - return err; - -} - -/** - * middma_shutdown - Shutdown the DMA controller - * @pdev: Controller PCI device structure - * - * Called by remove - * Unregister DMa controller, clear all structures and free interrupt - */ -static void middma_shutdown(struct pci_dev *pdev) -{ - struct middma_device *device = pci_get_drvdata(pdev); - - dma_async_device_unregister(&device->common); - pci_pool_destroy(device->dma_pool); - if (device->mask_reg) - iounmap(device->mask_reg); - if (device->dma_base) - iounmap(device->dma_base); - free_irq(pdev->irq, device); - return; -} - -/** - * intel_mid_dma_probe - PCI Probe - * @pdev: Controller PCI device structure - * @id: pci device id structure - * - * Initialize the PCI device, map BARs, query driver data. - * Call setup_dma to complete contoller and chan initilzation - */ -static int intel_mid_dma_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - struct middma_device *device; - u32 base_addr, bar_size; - struct intel_mid_dma_probe_info *info; - int err; - - pr_debug("MDMA: probe for %x\n", pdev->device); - info = (void *)id->driver_data; - pr_debug("MDMA: CH %d, base %d, block len %d, Periphral mask %x\n", - info->max_chan, info->ch_base, - info->block_size, info->pimr_mask); - - err = pci_enable_device(pdev); - if (err) - goto err_enable_device; - - err = pci_request_regions(pdev, "intel_mid_dmac"); - if (err) - goto err_request_regions; - - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (err) - goto err_set_dma_mask; - - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - if (err) - goto err_set_dma_mask; - - device = kzalloc(sizeof(*device), GFP_KERNEL); - if (!device) { - pr_err("ERR_MDMA:kzalloc failed probe\n"); - err = -ENOMEM; - goto err_kzalloc; - } - device->pdev = pci_dev_get(pdev); - - base_addr = pci_resource_start(pdev, 0); - bar_size = pci_resource_len(pdev, 0); - device->dma_base = ioremap_nocache(base_addr, DMA_REG_SIZE); - if (!device->dma_base) { - pr_err("ERR_MDMA:ioremap failed\n"); - err = -ENOMEM; - goto err_ioremap; - } - pci_set_drvdata(pdev, device); - pci_set_master(pdev); - device->max_chan = info->max_chan; - device->chan_base = info->ch_base; - device->block_size = info->block_size; - device->pimr_mask = info->pimr_mask; - - err = mid_setup_dma(pdev); - if (err) - goto err_dma; - - pm_runtime_put_noidle(&pdev->dev); - pm_runtime_allow(&pdev->dev); - return 0; - -err_dma: - iounmap(device->dma_base); -err_ioremap: - pci_dev_put(pdev); - kfree(device); -err_kzalloc: -err_set_dma_mask: - pci_release_regions(pdev); - pci_disable_device(pdev); -err_request_regions: -err_enable_device: - pr_err("ERR_MDMA:Probe failed %d\n", err); - return err; -} - -/** - * intel_mid_dma_remove - PCI remove - * @pdev: Controller PCI device structure - * - * Free up all resources and data - * Call shutdown_dma to complete contoller and chan cleanup - */ -static void intel_mid_dma_remove(struct pci_dev *pdev) -{ - struct middma_device *device = pci_get_drvdata(pdev); - - pm_runtime_get_noresume(&pdev->dev); - pm_runtime_forbid(&pdev->dev); - middma_shutdown(pdev); - pci_dev_put(pdev); - kfree(device); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -/* Power Management */ -/* -* dma_suspend - PCI suspend function -* -* @pci: PCI device structure -* @state: PM message -* -* This function is called by OS when a power event occurs -*/ -static int dma_suspend(struct device *dev) -{ - struct pci_dev *pci = to_pci_dev(dev); - int i; - struct middma_device *device = pci_get_drvdata(pci); - pr_debug("MDMA: dma_suspend called\n"); - - for (i = 0; i < device->max_chan; i++) { - if (device->ch[i].in_use) - return -EAGAIN; - } - dmac1_mask_periphral_intr(device); - device->state = SUSPENDED; - pci_save_state(pci); - pci_disable_device(pci); - pci_set_power_state(pci, PCI_D3hot); - return 0; -} - -/** -* dma_resume - PCI resume function -* -* @pci: PCI device structure -* -* This function is called by OS when a power event occurs -*/ -int dma_resume(struct device *dev) -{ - struct pci_dev *pci = to_pci_dev(dev); - int ret; - struct middma_device *device = pci_get_drvdata(pci); - - pr_debug("MDMA: dma_resume called\n"); - pci_set_power_state(pci, PCI_D0); - pci_restore_state(pci); - ret = pci_enable_device(pci); - if (ret) { - pr_err("MDMA: device can't be enabled for %x\n", pci->device); - return ret; - } - device->state = RUNNING; - iowrite32(REG_BIT0, device->dma_base + DMA_CFG); - return 0; -} - -static int dma_runtime_suspend(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - struct middma_device *device = pci_get_drvdata(pci_dev); - - device->state = SUSPENDED; - return 0; -} - -static int dma_runtime_resume(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - struct middma_device *device = pci_get_drvdata(pci_dev); - - device->state = RUNNING; - iowrite32(REG_BIT0, device->dma_base + DMA_CFG); - return 0; -} - -static int dma_runtime_idle(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct middma_device *device = pci_get_drvdata(pdev); - int i; - - for (i = 0; i < device->max_chan; i++) { - if (device->ch[i].in_use) - return -EAGAIN; - } - - return 0; -} - -/****************************************************************************** -* PCI stuff -*/ -static struct pci_device_id intel_mid_dma_ids[] = { - { PCI_VDEVICE(INTEL, INTEL_MID_DMAC1_ID), INFO(2, 6, 4095, 0x200020)}, - { PCI_VDEVICE(INTEL, INTEL_MID_DMAC2_ID), INFO(2, 0, 2047, 0)}, - { PCI_VDEVICE(INTEL, INTEL_MID_GP_DMAC2_ID), INFO(2, 0, 2047, 0)}, - { PCI_VDEVICE(INTEL, INTEL_MFLD_DMAC1_ID), INFO(4, 0, 4095, 0x400040)}, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, intel_mid_dma_ids); - -static const struct dev_pm_ops intel_mid_dma_pm = { - .runtime_suspend = dma_runtime_suspend, - .runtime_resume = dma_runtime_resume, - .runtime_idle = dma_runtime_idle, - .suspend = dma_suspend, - .resume = dma_resume, -}; - -static struct pci_driver intel_mid_dma_pci_driver = { - .name = "Intel MID DMA", - .id_table = intel_mid_dma_ids, - .probe = intel_mid_dma_probe, - .remove = intel_mid_dma_remove, -#ifdef CONFIG_PM - .driver = { - .pm = &intel_mid_dma_pm, - }, -#endif -}; - -static int __init intel_mid_dma_init(void) -{ - pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n", - INTEL_MID_DMA_DRIVER_VERSION); - return pci_register_driver(&intel_mid_dma_pci_driver); -} -fs_initcall(intel_mid_dma_init); - -static void __exit intel_mid_dma_exit(void) -{ - pci_unregister_driver(&intel_mid_dma_pci_driver); -} -module_exit(intel_mid_dma_exit); - -MODULE_AUTHOR("Vinod Koul <vinod.koul@intel.com>"); -MODULE_DESCRIPTION("Intel (R) MID DMAC Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_VERSION(INTEL_MID_DMA_DRIVER_VERSION); diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h deleted file mode 100644 index 17b42192ea58..000000000000 --- a/drivers/dma/intel_mid_dma_regs.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * intel_mid_dma_regs.h - Intel MID DMA Drivers - * - * Copyright (C) 2008-10 Intel Corp - * Author: Vinod Koul <vinod.koul@intel.com> - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * - */ -#ifndef __INTEL_MID_DMAC_REGS_H__ -#define __INTEL_MID_DMAC_REGS_H__ - -#include <linux/dmaengine.h> -#include <linux/dmapool.h> -#include <linux/pci_ids.h> - -#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0" - -#define REG_BIT0 0x00000001 -#define REG_BIT8 0x00000100 -#define INT_MASK_WE 0x8 -#define CLEAR_DONE 0xFFFFEFFF -#define UNMASK_INTR_REG(chan_num) \ - ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num)) -#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num) - -#define ENABLE_CHANNEL(chan_num) \ - ((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num)) - -#define DISABLE_CHANNEL(chan_num) \ - (REG_BIT8 << chan_num) - -#define DESCS_PER_CHANNEL 16 -/*DMA Registers*/ -/*registers associated with channel programming*/ -#define DMA_REG_SIZE 0x400 -#define DMA_CH_SIZE 0x58 - -/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/ -#define SAR 0x00 /* Source Address Register*/ -#define DAR 0x08 /* Destination Address Register*/ -#define LLP 0x10 /* Linked List Pointer Register*/ -#define CTL_LOW 0x18 /* Control Register*/ -#define CTL_HIGH 0x1C /* Control Register*/ -#define CFG_LOW 0x40 /* Configuration Register Low*/ -#define CFG_HIGH 0x44 /* Configuration Register high*/ - -#define STATUS_TFR 0x2E8 -#define STATUS_BLOCK 0x2F0 -#define STATUS_ERR 0x308 - -#define RAW_TFR 0x2C0 -#define RAW_BLOCK 0x2C8 -#define RAW_ERR 0x2E0 - -#define MASK_TFR 0x310 -#define MASK_BLOCK 0x318 -#define MASK_SRC_TRAN 0x320 -#define MASK_DST_TRAN 0x328 -#define MASK_ERR 0x330 - -#define CLEAR_TFR 0x338 -#define CLEAR_BLOCK 0x340 -#define CLEAR_SRC_TRAN 0x348 -#define CLEAR_DST_TRAN 0x350 -#define CLEAR_ERR 0x358 - -#define INTR_STATUS 0x360 -#define DMA_CFG 0x398 -#define DMA_CHAN_EN 0x3A0 - -/*DMA channel control registers*/ -union intel_mid_dma_ctl_lo { - struct { - u32 int_en:1; /*enable or disable interrupts*/ - /*should be 0*/ - u32 dst_tr_width:3; /*destination transfer width*/ - /*usually 32 bits = 010*/ - u32 src_tr_width:3; /*source transfer width*/ - /*usually 32 bits = 010*/ - u32 dinc:2; /*destination address inc/dec*/ - /*For mem:INC=00, Periphral NoINC=11*/ - u32 sinc:2; /*source address inc or dec, as above*/ - u32 dst_msize:3; /*destination burst transaction length*/ - /*always = 16 ie 011*/ - u32 src_msize:3; /*source burst transaction length*/ - /*always = 16 ie 011*/ - u32 reser1:3; - u32 tt_fc:3; /*transfer type and flow controller*/ - /*M-M = 000 - P-M = 010 - M-P = 001*/ - u32 dms:2; /*destination master select = 0*/ - u32 sms:2; /*source master select = 0*/ - u32 llp_dst_en:1; /*enable/disable destination LLP = 0*/ - u32 llp_src_en:1; /*enable/disable source LLP = 0*/ - u32 reser2:3; - } ctlx; - u32 ctl_lo; -}; - -union intel_mid_dma_ctl_hi { - struct { - u32 block_ts:12; /*block transfer size*/ - u32 done:1; /*Done - updated by DMAC*/ - u32 reser:19; /*configured by DMAC*/ - } ctlx; - u32 ctl_hi; - -}; - -/*DMA channel configuration registers*/ -union intel_mid_dma_cfg_lo { - struct { - u32 reser1:5; - u32 ch_prior:3; /*channel priority = 0*/ - u32 ch_susp:1; /*channel suspend = 0*/ - u32 fifo_empty:1; /*FIFO empty or not R bit = 0*/ - u32 hs_sel_dst:1; /*select HW/SW destn handshaking*/ - /*HW = 0, SW = 1*/ - u32 hs_sel_src:1; /*select HW/SW src handshaking*/ - u32 reser2:6; - u32 dst_hs_pol:1; /*dest HS interface polarity*/ - u32 src_hs_pol:1; /*src HS interface polarity*/ - u32 max_abrst:10; /*max AMBA burst len = 0 (no sw limit*/ - u32 reload_src:1; /*auto reload src addr =1 if src is P*/ - u32 reload_dst:1; /*AR destn addr =1 if dstn is P*/ - } cfgx; - u32 cfg_lo; -}; - -union intel_mid_dma_cfg_hi { - struct { - u32 fcmode:1; /*flow control mode = 1*/ - u32 fifo_mode:1; /*FIFO mode select = 1*/ - u32 protctl:3; /*protection control = 0*/ - u32 rsvd:2; - u32 src_per:4; /*src hw HS interface*/ - u32 dst_per:4; /*dstn hw HS interface*/ - u32 reser2:17; - } cfgx; - u32 cfg_hi; -}; - - -/** - * struct intel_mid_dma_chan - internal mid representation of a DMA channel - * @chan: dma_chan strcture represetation for mid chan - * @ch_regs: MMIO register space pointer to channel register - * @dma_base: MMIO register space DMA engine base pointer - * @ch_id: DMA channel id - * @lock: channel spinlock - * @active_list: current active descriptors - * @queue: current queued up descriptors - * @free_list: current free descriptors - * @slave: dma slave structure - * @descs_allocated: total number of descriptors allocated - * @dma: dma device structure pointer - * @busy: bool representing if ch is busy (active txn) or not - * @in_use: bool representing if ch is in use or not - * @raw_tfr: raw trf interrupt received - * @raw_block: raw block interrupt received - */ -struct intel_mid_dma_chan { - struct dma_chan chan; - void __iomem *ch_regs; - void __iomem *dma_base; - int ch_id; - spinlock_t lock; - struct list_head active_list; - struct list_head queue; - struct list_head free_list; - unsigned int descs_allocated; - struct middma_device *dma; - bool busy; - bool in_use; - u32 raw_tfr; - u32 raw_block; - struct intel_mid_dma_slave *mid_slave; -}; - -static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan( - struct dma_chan *chan) -{ - return container_of(chan, struct intel_mid_dma_chan, chan); -} - -enum intel_mid_dma_state { - RUNNING = 0, - SUSPENDED, -}; -/** - * struct middma_device - internal representation of a DMA device - * @pdev: PCI device - * @dma_base: MMIO register space pointer of DMA - * @dma_pool: for allocating DMA descriptors - * @common: embedded struct dma_device - * @tasklet: dma tasklet for processing interrupts - * @ch: per channel data - * @pci_id: DMA device PCI ID - * @intr_mask: Interrupt mask to be used - * @mask_reg: MMIO register for periphral mask - * @chan_base: Base ch index (read from driver data) - * @max_chan: max number of chs supported (from drv_data) - * @block_size: Block size of DMA transfer supported (from drv_data) - * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data) - * @state: dma PM device state - */ -struct middma_device { - struct pci_dev *pdev; - void __iomem *dma_base; - struct pci_pool *dma_pool; - struct dma_device common; - struct tasklet_struct tasklet; - struct intel_mid_dma_chan ch[MAX_CHAN]; - unsigned int pci_id; - unsigned int intr_mask; - void __iomem *mask_reg; - int chan_base; - int max_chan; - int block_size; - unsigned int pimr_mask; - enum intel_mid_dma_state state; -}; - -static inline struct middma_device *to_middma_device(struct dma_device *common) -{ - return container_of(common, struct middma_device, common); -} - -struct intel_mid_dma_desc { - void __iomem *block; /*ch ptr*/ - struct list_head desc_node; - struct dma_async_tx_descriptor txd; - size_t len; - dma_addr_t sar; - dma_addr_t dar; - u32 cfg_hi; - u32 cfg_lo; - u32 ctl_lo; - u32 ctl_hi; - struct pci_pool *lli_pool; - struct intel_mid_dma_lli *lli; - dma_addr_t lli_phys; - unsigned int lli_length; - unsigned int current_lli; - dma_addr_t next; - enum dma_transfer_direction dirn; - enum dma_status status; - enum dma_slave_buswidth width; /*width of DMA txn*/ - enum intel_mid_dma_mode cfg_mode; /*mode configuration*/ - -}; - -struct intel_mid_dma_lli { - dma_addr_t sar; - dma_addr_t dar; - dma_addr_t llp; - u32 ctl_lo; - u32 ctl_hi; -} __attribute__ ((packed)); - -static inline int test_ch_en(void __iomem *dma, u32 ch_no) -{ - u32 en_reg = ioread32(dma + DMA_CHAN_EN); - return (en_reg >> ch_no) & 0x1; -} - -static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc - (struct dma_async_tx_descriptor *txd) -{ - return container_of(txd, struct intel_mid_dma_desc, txd); -} - -static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave - (struct dma_slave_config *slave) -{ - return container_of(slave, struct intel_mid_dma_slave, dma_slave); -} - - -int dma_resume(struct device *dev); - -#endif /*__INTEL_MID_DMAC_REGS_H__*/ diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ab8dfbef6f1b..198f96b7fb45 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -159,10 +159,9 @@ config SPI_BUTTERFLY config SPI_CADENCE tristate "Cadence SPI controller" - depends on ARM help This selects the Cadence SPI controller master driver - used by Xilinx Zynq. + used by Xilinx Zynq and ZynqMP. config SPI_CLPS711X tristate "CLPS711X host SPI controller" @@ -632,7 +631,7 @@ config SPI_DW_PCI config SPI_DW_MID_DMA bool "DMA support for DW SPI controller on Intel MID platform" - depends on SPI_DW_PCI && INTEL_MID_DMAC + depends on SPI_DW_PCI && DW_DMAC_PCI config SPI_DW_MMIO tristate "Memory-mapped io interface driver for DW SPI core" diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 06de34001c66..a2f40b1b2225 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -180,11 +180,17 @@ | SPI_BF(name, value)) /* Register access macros */ +#ifdef CONFIG_AVR32 #define spi_readl(port, reg) \ __raw_readl((port)->regs + SPI_##reg) #define spi_writel(port, reg, value) \ __raw_writel((value), (port)->regs + SPI_##reg) - +#else +#define spi_readl(port, reg) \ + readl_relaxed((port)->regs + SPI_##reg) +#define spi_writel(port, reg, value) \ + writel_relaxed((value), (port)->regs + SPI_##reg) +#endif /* use PIO for small transfers, avoiding DMA setup/teardown overhead and * cache operations; better heuristics consider wordsize and bitrate. */ diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 419a782ab6d5..f63864a893c5 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -3,6 +3,7 @@ * * Copyright (C) 2012 Chris Boot * Copyright (C) 2013 Stephen Warren + * Copyright (C) 2015 Martin Sperl * * This driver is inspired by: * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> @@ -29,6 +30,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/of_gpio.h> #include <linux/of_device.h> #include <linux/spi/spi.h> @@ -66,8 +68,10 @@ #define BCM2835_SPI_CS_CS_10 0x00000002 #define BCM2835_SPI_CS_CS_01 0x00000001 -#define BCM2835_SPI_TIMEOUT_MS 30000 -#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS) +#define BCM2835_SPI_POLLING_LIMIT_US 30 +#define BCM2835_SPI_TIMEOUT_MS 30000 +#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ + | SPI_NO_CS | SPI_3WIRE) #define DRV_NAME "spi-bcm2835" @@ -75,10 +79,10 @@ struct bcm2835_spi { void __iomem *regs; struct clk *clk; int irq; - struct completion done; const u8 *tx_buf; u8 *rx_buf; - int len; + int tx_len; + int rx_len; }; static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg) @@ -91,205 +95,315 @@ static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val) writel(val, bs->regs + reg); } -static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs, int len) +static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs) { u8 byte; - while (len--) { + while ((bs->rx_len) && + (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_RXD)) { byte = bcm2835_rd(bs, BCM2835_SPI_FIFO); if (bs->rx_buf) *bs->rx_buf++ = byte; + bs->rx_len--; } } -static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs, int len) +static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs) { u8 byte; - if (len > bs->len) - len = bs->len; - - while (len--) { + while ((bs->tx_len) && + (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_TXD)) { byte = bs->tx_buf ? *bs->tx_buf++ : 0; bcm2835_wr(bs, BCM2835_SPI_FIFO, byte); - bs->len--; + bs->tx_len--; } } +static void bcm2835_spi_reset_hw(struct spi_master *master) +{ + struct bcm2835_spi *bs = spi_master_get_devdata(master); + u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); + + /* Disable SPI interrupts and transfer */ + cs &= ~(BCM2835_SPI_CS_INTR | + BCM2835_SPI_CS_INTD | + BCM2835_SPI_CS_TA); + /* and reset RX/TX FIFOS */ + cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX; + + /* and reset the SPI_HW */ + bcm2835_wr(bs, BCM2835_SPI_CS, cs); +} + static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) { struct spi_master *master = dev_id; struct bcm2835_spi *bs = spi_master_get_devdata(master); - u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); - /* - * RXR - RX needs Reading. This means 12 (or more) bytes have been - * transmitted and hence 12 (or more) bytes have been received. - * - * The FIFO is 16-bytes deep. We check for this interrupt to keep the - * FIFO full; we have a 4-byte-time buffer for IRQ latency. We check - * this before DONE (TX empty) just in case we delayed processing this - * interrupt for some reason. - * - * We only check for this case if we have more bytes to TX; at the end - * of the transfer, we ignore this pipelining optimization, and let - * bcm2835_spi_finish_transfer() drain the RX FIFO. + /* Read as many bytes as possible from FIFO */ + bcm2835_rd_fifo(bs); + /* Write as many bytes as possible to FIFO */ + bcm2835_wr_fifo(bs); + + /* based on flags decide if we can finish the transfer */ + if (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE) { + /* Transfer complete - reset SPI HW */ + bcm2835_spi_reset_hw(master); + /* wake up the framework */ + complete(&master->xfer_completion); + } + + return IRQ_HANDLED; +} + +static int bcm2835_spi_transfer_one_poll(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr, + u32 cs, + unsigned long xfer_time_us) +{ + struct bcm2835_spi *bs = spi_master_get_devdata(master); + unsigned long timeout = jiffies + + max(4 * xfer_time_us * HZ / 1000000, 2uL); + + /* enable HW block without interrupts */ + bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA); + + /* set timeout to 4x the expected time, or 2 jiffies */ + /* loop until finished the transfer */ + while (bs->rx_len) { + /* read from fifo as much as possible */ + bcm2835_rd_fifo(bs); + /* fill in tx fifo as much as possible */ + bcm2835_wr_fifo(bs); + /* if we still expect some data after the read, + * check for a possible timeout + */ + if (bs->rx_len && time_after(jiffies, timeout)) { + /* Transfer complete - reset SPI HW */ + bcm2835_spi_reset_hw(master); + /* and return timeout */ + return -ETIMEDOUT; + } + } + + /* Transfer complete - reset SPI HW */ + bcm2835_spi_reset_hw(master); + /* and return without waiting for completion */ + return 0; +} + +static int bcm2835_spi_transfer_one_irq(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr, + u32 cs) +{ + struct bcm2835_spi *bs = spi_master_get_devdata(master); + + /* fill in fifo if we have gpio-cs + * note that there have been rare events where the native-CS + * flapped for <1us which may change the behaviour + * with gpio-cs this does not happen, so it is implemented + * only for this case */ - if (bs->len && (cs & BCM2835_SPI_CS_RXR)) { - /* Read 12 bytes of data */ - bcm2835_rd_fifo(bs, 12); - - /* Write up to 12 bytes */ - bcm2835_wr_fifo(bs, 12); - - /* - * We must have written something to the TX FIFO due to the - * bs->len check above, so cannot be DONE. Hence, return - * early. Note that DONE could also be set if we serviced an - * RXR interrupt really late. + if (gpio_is_valid(spi->cs_gpio)) { + /* enable HW block, but without interrupts enabled + * this would triggern an immediate interrupt */ - return IRQ_HANDLED; + bcm2835_wr(bs, BCM2835_SPI_CS, + cs | BCM2835_SPI_CS_TA); + /* fill in tx fifo as much as possible */ + bcm2835_wr_fifo(bs); } /* - * DONE - TX empty. This occurs when we first enable the transfer - * since we do not pre-fill the TX FIFO. At any other time, given that - * we refill the TX FIFO above based on RXR, and hence ignore DONE if - * RXR is set, DONE really does mean end-of-transfer. + * Enable the HW block. This will immediately trigger a DONE (TX + * empty) interrupt, upon which we will fill the TX FIFO with the + * first TX bytes. Pre-filling the TX FIFO here to avoid the + * interrupt doesn't work:-( */ - if (cs & BCM2835_SPI_CS_DONE) { - if (bs->len) { /* First interrupt in a transfer */ - bcm2835_wr_fifo(bs, 16); - } else { /* Transfer complete */ - /* Disable SPI interrupts */ - cs &= ~(BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD); - bcm2835_wr(bs, BCM2835_SPI_CS, cs); - - /* - * Wake up bcm2835_spi_transfer_one(), which will call - * bcm2835_spi_finish_transfer(), to drain the RX FIFO. - */ - complete(&bs->done); - } - - return IRQ_HANDLED; - } + cs |= BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA; + bcm2835_wr(bs, BCM2835_SPI_CS, cs); - return IRQ_NONE; + /* signal that we need to wait for completion */ + return 1; } -static int bcm2835_spi_start_transfer(struct spi_device *spi, - struct spi_transfer *tfr) +static int bcm2835_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr) { - struct bcm2835_spi *bs = spi_master_get_devdata(spi->master); + struct bcm2835_spi *bs = spi_master_get_devdata(master); unsigned long spi_hz, clk_hz, cdiv; - u32 cs = BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA; + unsigned long spi_used_hz, xfer_time_us; + u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); + /* set clock */ spi_hz = tfr->speed_hz; clk_hz = clk_get_rate(bs->clk); if (spi_hz >= clk_hz / 2) { cdiv = 2; /* clk_hz/2 is the fastest we can go */ } else if (spi_hz) { - /* CDIV must be a power of two */ - cdiv = roundup_pow_of_two(DIV_ROUND_UP(clk_hz, spi_hz)); + /* CDIV must be a multiple of two */ + cdiv = DIV_ROUND_UP(clk_hz, spi_hz); + cdiv += (cdiv % 2); if (cdiv >= 65536) cdiv = 0; /* 0 is the slowest we can go */ - } else + } else { cdiv = 0; /* 0 is the slowest we can go */ + } + spi_used_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536); + bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); + /* handle all the modes */ + if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf)) + cs |= BCM2835_SPI_CS_REN; if (spi->mode & SPI_CPOL) cs |= BCM2835_SPI_CS_CPOL; if (spi->mode & SPI_CPHA) cs |= BCM2835_SPI_CS_CPHA; - if (!(spi->mode & SPI_NO_CS)) { - if (spi->mode & SPI_CS_HIGH) { - cs |= BCM2835_SPI_CS_CSPOL; - cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select; - } - - cs |= spi->chip_select; - } + /* for gpio_cs set dummy CS so that no HW-CS get changed + * we can not run this in bcm2835_spi_set_cs, as it does + * not get called for cs_gpio cases, so we need to do it here + */ + if (gpio_is_valid(spi->cs_gpio) || (spi->mode & SPI_NO_CS)) + cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01; - reinit_completion(&bs->done); + /* set transmit buffers and length */ bs->tx_buf = tfr->tx_buf; bs->rx_buf = tfr->rx_buf; - bs->len = tfr->len; + bs->tx_len = tfr->len; + bs->rx_len = tfr->len; - bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); - /* - * Enable the HW block. This will immediately trigger a DONE (TX - * empty) interrupt, upon which we will fill the TX FIFO with the - * first TX bytes. Pre-filling the TX FIFO here to avoid the - * interrupt doesn't work:-( - */ - bcm2835_wr(bs, BCM2835_SPI_CS, cs); + /* calculate the estimated time in us the transfer runs */ + xfer_time_us = tfr->len + * 9 /* clocks/byte - SPI-HW waits 1 clock after each byte */ + * 1000000 / spi_used_hz; - return 0; + /* for short requests run polling*/ + if (xfer_time_us <= BCM2835_SPI_POLLING_LIMIT_US) + return bcm2835_spi_transfer_one_poll(master, spi, tfr, + cs, xfer_time_us); + + return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs); } -static int bcm2835_spi_finish_transfer(struct spi_device *spi, - struct spi_transfer *tfr, bool cs_change) +static void bcm2835_spi_handle_err(struct spi_master *master, + struct spi_message *msg) { - struct bcm2835_spi *bs = spi_master_get_devdata(spi->master); - u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); + bcm2835_spi_reset_hw(master); +} + +static void bcm2835_spi_set_cs(struct spi_device *spi, bool gpio_level) +{ + /* + * we can assume that we are "native" as per spi_set_cs + * calling us ONLY when cs_gpio is not set + * we can also assume that we are CS < 3 as per bcm2835_spi_setup + * we would not get called because of error handling there. + * the level passed is the electrical level not enabled/disabled + * so it has to get translated back to enable/disable + * see spi_set_cs in spi.c for the implementation + */ - /* Drain RX FIFO */ - while (cs & BCM2835_SPI_CS_RXD) { - bcm2835_rd_fifo(bs, 1); - cs = bcm2835_rd(bs, BCM2835_SPI_CS); + struct spi_master *master = spi->master; + struct bcm2835_spi *bs = spi_master_get_devdata(master); + u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); + bool enable; + + /* calculate the enable flag from the passed gpio_level */ + enable = (spi->mode & SPI_CS_HIGH) ? gpio_level : !gpio_level; + + /* set flags for "reverse" polarity in the registers */ + if (spi->mode & SPI_CS_HIGH) { + /* set the correct CS-bits */ + cs |= BCM2835_SPI_CS_CSPOL; + cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select; + } else { + /* clean the CS-bits */ + cs &= ~BCM2835_SPI_CS_CSPOL; + cs &= ~(BCM2835_SPI_CS_CSPOL0 << spi->chip_select); } - if (tfr->delay_usecs) - udelay(tfr->delay_usecs); + /* select the correct chip_select depending on disabled/enabled */ + if (enable) { + /* set cs correctly */ + if (spi->mode & SPI_NO_CS) { + /* use the "undefined" chip-select */ + cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01; + } else { + /* set the chip select */ + cs &= ~(BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01); + cs |= spi->chip_select; + } + } else { + /* disable CSPOL which puts HW-CS into deselected state */ + cs &= ~BCM2835_SPI_CS_CSPOL; + /* use the "undefined" chip-select as precaution */ + cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01; + } - if (cs_change) - /* Clear TA flag */ - bcm2835_wr(bs, BCM2835_SPI_CS, cs & ~BCM2835_SPI_CS_TA); + /* finally set the calculated flags in SPI_CS */ + bcm2835_wr(bs, BCM2835_SPI_CS, cs); +} - return 0; +static int chip_match_name(struct gpio_chip *chip, void *data) +{ + return !strcmp(chip->label, data); } -static int bcm2835_spi_transfer_one(struct spi_master *master, - struct spi_message *mesg) +static int bcm2835_spi_setup(struct spi_device *spi) { - struct bcm2835_spi *bs = spi_master_get_devdata(master); - struct spi_transfer *tfr; - struct spi_device *spi = mesg->spi; - int err = 0; - unsigned int timeout; - bool cs_change; - - list_for_each_entry(tfr, &mesg->transfers, transfer_list) { - err = bcm2835_spi_start_transfer(spi, tfr); - if (err) - goto out; - - timeout = wait_for_completion_timeout(&bs->done, - msecs_to_jiffies(BCM2835_SPI_TIMEOUT_MS)); - if (!timeout) { - err = -ETIMEDOUT; - goto out; - } + int err; + struct gpio_chip *chip; + /* + * sanity checking the native-chipselects + */ + if (spi->mode & SPI_NO_CS) + return 0; + if (gpio_is_valid(spi->cs_gpio)) + return 0; + if (spi->chip_select > 1) { + /* error in the case of native CS requested with CS > 1 + * officially there is a CS2, but it is not documented + * which GPIO is connected with that... + */ + dev_err(&spi->dev, + "setup: only two native chip-selects are supported\n"); + return -EINVAL; + } + /* now translate native cs to GPIO */ - cs_change = tfr->cs_change || - list_is_last(&tfr->transfer_list, &mesg->transfers); + /* get the gpio chip for the base */ + chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); + if (!chip) + return 0; - err = bcm2835_spi_finish_transfer(spi, tfr, cs_change); - if (err) - goto out; + /* and calculate the real CS */ + spi->cs_gpio = chip->base + 8 - spi->chip_select; - mesg->actual_length += (tfr->len - bs->len); - } + /* and set up the "mode" and level */ + dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", + spi->chip_select, spi->cs_gpio); -out: - /* Clear FIFOs, and disable the HW block */ - bcm2835_wr(bs, BCM2835_SPI_CS, - BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); - mesg->status = err; - spi_finalize_current_message(master); + /* set up GPIO as output and pull to the correct level */ + err = gpio_direction_output(spi->cs_gpio, + (spi->mode & SPI_CS_HIGH) ? 0 : 1); + if (err) { + dev_err(&spi->dev, + "could not set CS%i gpio %i as output: %i", + spi->chip_select, spi->cs_gpio, err); + return err; + } + /* the implementation of pinctrl-bcm2835 currently does not + * set the GPIO value when using gpio_direction_output + * so we are setting it here explicitly + */ + gpio_set_value(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? 0 : 1); return 0; } @@ -312,13 +426,14 @@ static int bcm2835_spi_probe(struct platform_device *pdev) master->mode_bits = BCM2835_SPI_MODE_BITS; master->bits_per_word_mask = SPI_BPW_MASK(8); master->num_chipselect = 3; - master->transfer_one_message = bcm2835_spi_transfer_one; + master->setup = bcm2835_spi_setup; + master->set_cs = bcm2835_spi_set_cs; + master->transfer_one = bcm2835_spi_transfer_one; + master->handle_err = bcm2835_spi_handle_err; master->dev.of_node = pdev->dev.of_node; bs = spi_master_get_devdata(master); - init_completion(&bs->done); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); bs->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(bs->regs)) { @@ -343,13 +458,13 @@ static int bcm2835_spi_probe(struct platform_device *pdev) clk_prepare_enable(bs->clk); err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0, - dev_name(&pdev->dev), master); + dev_name(&pdev->dev), master); if (err) { dev_err(&pdev->dev, "could not request IRQ: %d\n", err); goto out_clk_disable; } - /* initialise the hardware */ + /* initialise the hardware with the default polarities */ bcm2835_wr(bs, BCM2835_SPI_CS, BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c index 3fb91c81015a..1520554978a3 100644 --- a/drivers/spi/spi-bcm53xx.c +++ b/drivers/spi/spi-bcm53xx.c @@ -44,7 +44,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms) u32 tmp; /* SPE bit has to be 0 before we read MSPI STATUS */ - deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000; + deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS); do { tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); if (!(tmp & B53SPI_MSPI_SPCR2_SPE)) @@ -56,7 +56,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms) goto spi_timeout; /* Check status */ - deadline = jiffies + timeout_ms * HZ / 1000; + deadline = jiffies + msecs_to_jiffies(timeout_ms); do { tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS); if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) { diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 37079937d2f7..a3d65b4f4944 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -559,7 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data) struct spi_transfer *previous = NULL; struct bfin_spi_slave_data *chip = NULL; unsigned int bits_per_word; - u16 cr, cr_width, dma_width, dma_config; + u16 cr, cr_width = 0, dma_width, dma_config; u32 tranf_success = 1; u8 full_duplex = 0; @@ -648,7 +648,6 @@ static void bfin_spi_pump_transfers(unsigned long data) } else if (bits_per_word == 8) { drv_data->n_bytes = bits_per_word/8; drv_data->len = transfer->len; - cr_width = 0; drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; } cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h index c616e41521be..06b34e5bcfa3 100644 --- a/drivers/spi/spi-bitbang-txrx.h +++ b/drivers/spi/spi-bitbang-txrx.h @@ -49,12 +49,17 @@ bitbang_txrx_be_cpha0(struct spi_device *spi, { /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */ + bool oldbit = !(word & 1); /* clock starts at inactive polarity */ for (word <<= (32 - bits); likely(bits); bits--) { /* setup MSB (to slave) on trailing edge */ - if ((flags & SPI_MASTER_NO_TX) == 0) - setmosi(spi, word & (1 << 31)); + if ((flags & SPI_MASTER_NO_TX) == 0) { + if ((word & (1 << 31)) != oldbit) { + setmosi(spi, word & (1 << 31)); + oldbit = word & (1 << 31); + } + } spidelay(nsecs); /* T(setup) */ setsck(spi, !cpol); @@ -76,13 +81,18 @@ bitbang_txrx_be_cpha1(struct spi_device *spi, { /* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */ + bool oldbit = !(word & (1 << 31)); /* clock starts at inactive polarity */ for (word <<= (32 - bits); likely(bits); bits--) { /* setup MSB (to slave) on leading edge */ setsck(spi, !cpol); - if ((flags & SPI_MASTER_NO_TX) == 0) - setmosi(spi, word & (1 << 31)); + if ((flags & SPI_MASTER_NO_TX) == 0) { + if ((word & (1 << 31)) != oldbit) { + setmosi(spi, word & (1 << 31)); + oldbit = word & (1 << 31); + } + } spidelay(nsecs); /* T(setup) */ setsck(spi, cpol); diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 4f8c798e0633..bb1052e748f2 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -23,29 +23,31 @@ #include "spi-dw.h" #ifdef CONFIG_SPI_DW_MID_DMA -#include <linux/intel_mid_dma.h> #include <linux/pci.h> +#include <linux/platform_data/dma-dw.h> #define RX_BUSY 0 #define TX_BUSY 1 -struct mid_dma { - struct intel_mid_dma_slave dmas_tx; - struct intel_mid_dma_slave dmas_rx; -}; +static struct dw_dma_slave mid_dma_tx = { .dst_id = 1 }; +static struct dw_dma_slave mid_dma_rx = { .src_id = 0 }; static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) { - struct dw_spi *dws = param; + struct dw_dma_slave *s = param; + + if (s->dma_dev != chan->device->dev) + return false; - return dws->dma_dev == chan->device->dev; + chan->private = s; + return true; } static int mid_spi_dma_init(struct dw_spi *dws) { - struct mid_dma *dw_dma = dws->dma_priv; struct pci_dev *dma_dev; - struct intel_mid_dma_slave *rxs, *txs; + struct dw_dma_slave *tx = dws->dma_tx; + struct dw_dma_slave *rx = dws->dma_rx; dma_cap_mask_t mask; /* @@ -56,28 +58,22 @@ static int mid_spi_dma_init(struct dw_spi *dws) if (!dma_dev) return -ENODEV; - dws->dma_dev = &dma_dev->dev; - dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* 1. Init rx channel */ - dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + rx->dma_dev = &dma_dev->dev; + dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, rx); if (!dws->rxchan) goto err_exit; - rxs = &dw_dma->dmas_rx; - rxs->hs_mode = LNW_DMA_HW_HS; - rxs->cfg_mode = LNW_DMA_PER_TO_MEM; - dws->rxchan->private = rxs; + dws->master->dma_rx = dws->rxchan; /* 2. Init tx channel */ - dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + tx->dma_dev = &dma_dev->dev; + dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, tx); if (!dws->txchan) goto free_rxchan; - txs = &dw_dma->dmas_tx; - txs->hs_mode = LNW_DMA_HW_HS; - txs->cfg_mode = LNW_DMA_MEM_TO_PER; - dws->txchan->private = txs; + dws->master->dma_tx = dws->txchan; dws->dma_inited = 1; return 0; @@ -100,6 +96,42 @@ static void mid_spi_dma_exit(struct dw_spi *dws) dma_release_channel(dws->rxchan); } +static irqreturn_t dma_transfer(struct dw_spi *dws) +{ + u16 irq_status = dw_readl(dws, DW_SPI_ISR); + + if (!irq_status) + return IRQ_NONE; + + dw_readl(dws, DW_SPI_ICR); + spi_reset_chip(dws); + + dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__); + dws->master->cur_msg->status = -EIO; + spi_finalize_current_transfer(dws->master); + return IRQ_HANDLED; +} + +static bool mid_spi_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct dw_spi *dws = spi_master_get_devdata(master); + + if (!dws->dma_inited) + return false; + + return xfer->len > dws->fifo_len; +} + +static enum dma_slave_buswidth convert_dma_width(u32 dma_width) { + if (dma_width == 1) + return DMA_SLAVE_BUSWIDTH_1_BYTE; + else if (dma_width == 2) + return DMA_SLAVE_BUSWIDTH_2_BYTES; + + return DMA_SLAVE_BUSWIDTH_UNDEFINED; +} + /* * dws->dma_chan_busy is set before the dma transfer starts, callback for tx * channel will clear a corresponding bit. @@ -111,33 +143,30 @@ static void dw_spi_dma_tx_done(void *arg) clear_bit(TX_BUSY, &dws->dma_chan_busy); if (test_bit(RX_BUSY, &dws->dma_chan_busy)) return; - dw_spi_xfer_done(dws); + spi_finalize_current_transfer(dws->master); } -static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws, + struct spi_transfer *xfer) { struct dma_slave_config txconf; struct dma_async_tx_descriptor *txdesc; - if (!dws->tx_dma) + if (!xfer->tx_buf) return NULL; txconf.direction = DMA_MEM_TO_DEV; txconf.dst_addr = dws->dma_addr; - txconf.dst_maxburst = LNW_DMA_MSIZE_16; + txconf.dst_maxburst = 16; txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - txconf.dst_addr_width = dws->dma_width; + txconf.dst_addr_width = convert_dma_width(dws->dma_width); txconf.device_fc = false; dmaengine_slave_config(dws->txchan, &txconf); - memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); - dws->tx_sgl.dma_address = dws->tx_dma; - dws->tx_sgl.length = dws->len; - txdesc = dmaengine_prep_slave_sg(dws->txchan, - &dws->tx_sgl, - 1, + xfer->tx_sg.sgl, + xfer->tx_sg.nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!txdesc) @@ -160,33 +189,30 @@ static void dw_spi_dma_rx_done(void *arg) clear_bit(RX_BUSY, &dws->dma_chan_busy); if (test_bit(TX_BUSY, &dws->dma_chan_busy)) return; - dw_spi_xfer_done(dws); + spi_finalize_current_transfer(dws->master); } -static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) +static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws, + struct spi_transfer *xfer) { struct dma_slave_config rxconf; struct dma_async_tx_descriptor *rxdesc; - if (!dws->rx_dma) + if (!xfer->rx_buf) return NULL; rxconf.direction = DMA_DEV_TO_MEM; rxconf.src_addr = dws->dma_addr; - rxconf.src_maxburst = LNW_DMA_MSIZE_16; + rxconf.src_maxburst = 16; rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - rxconf.src_addr_width = dws->dma_width; + rxconf.src_addr_width = convert_dma_width(dws->dma_width); rxconf.device_fc = false; dmaengine_slave_config(dws->rxchan, &rxconf); - memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); - dws->rx_sgl.dma_address = dws->rx_dma; - dws->rx_sgl.length = dws->len; - rxdesc = dmaengine_prep_slave_sg(dws->rxchan, - &dws->rx_sgl, - 1, + xfer->rx_sg.sgl, + xfer->rx_sg.nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!rxdesc) @@ -198,37 +224,36 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) return rxdesc; } -static void dw_spi_dma_setup(struct dw_spi *dws) +static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) { u16 dma_ctrl = 0; - spi_enable_chip(dws, 0); + dw_writel(dws, DW_SPI_DMARDLR, 0xf); + dw_writel(dws, DW_SPI_DMATDLR, 0x10); - dw_writew(dws, DW_SPI_DMARDLR, 0xf); - dw_writew(dws, DW_SPI_DMATDLR, 0x10); - - if (dws->tx_dma) + if (xfer->tx_buf) dma_ctrl |= SPI_DMA_TDMAE; - if (dws->rx_dma) + if (xfer->rx_buf) dma_ctrl |= SPI_DMA_RDMAE; - dw_writew(dws, DW_SPI_DMACR, dma_ctrl); + dw_writel(dws, DW_SPI_DMACR, dma_ctrl); + + /* Set the interrupt mask */ + spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI); - spi_enable_chip(dws, 1); + dws->transfer_handler = dma_transfer; + + return 0; } -static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) +static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer) { struct dma_async_tx_descriptor *txdesc, *rxdesc; - /* 1. setup DMA related registers */ - if (cs_change) - dw_spi_dma_setup(dws); + /* Prepare the TX dma transfer */ + txdesc = dw_spi_dma_prepare_tx(dws, xfer); - /* 2. Prepare the TX dma transfer */ - txdesc = dw_spi_dma_prepare_tx(dws); - - /* 3. Prepare the RX dma transfer */ - rxdesc = dw_spi_dma_prepare_rx(dws); + /* Prepare the RX dma transfer */ + rxdesc = dw_spi_dma_prepare_rx(dws, xfer); /* rx must be started before tx due to spi instinct */ if (rxdesc) { @@ -246,10 +271,25 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) return 0; } +static void mid_spi_dma_stop(struct dw_spi *dws) +{ + if (test_bit(TX_BUSY, &dws->dma_chan_busy)) { + dmaengine_terminate_all(dws->txchan); + clear_bit(TX_BUSY, &dws->dma_chan_busy); + } + if (test_bit(RX_BUSY, &dws->dma_chan_busy)) { + dmaengine_terminate_all(dws->rxchan); + clear_bit(RX_BUSY, &dws->dma_chan_busy); + } +} + static struct dw_spi_dma_ops mid_dma_ops = { .dma_init = mid_spi_dma_init, .dma_exit = mid_spi_dma_exit, + .dma_setup = mid_spi_dma_setup, + .can_dma = mid_spi_can_dma, .dma_transfer = mid_spi_dma_transfer, + .dma_stop = mid_spi_dma_stop, }; #endif @@ -282,9 +322,8 @@ int dw_spi_mid_init(struct dw_spi *dws) iounmap(clk_reg); #ifdef CONFIG_SPI_DW_MID_DMA - dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL); - if (!dws->dma_priv) - return -ENOMEM; + dws->dma_tx = &mid_dma_tx; + dws->dma_rx = &mid_dma_rx; dws->dma_ops = &mid_dma_ops; #endif return 0; diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 4847afba89f4..8d67d03c71eb 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -28,11 +28,6 @@ #include <linux/debugfs.h> #endif -#define START_STATE ((void *)0) -#define RUNNING_STATE ((void *)1) -#define DONE_STATE ((void *)2) -#define ERROR_STATE ((void *)-1) - /* Slave spi_dev related */ struct chip_data { u16 cr0; @@ -143,13 +138,26 @@ static inline void dw_spi_debugfs_remove(struct dw_spi *dws) } #endif /* CONFIG_DEBUG_FS */ +static void dw_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + struct chip_data *chip = spi_get_ctldata(spi); + + /* Chip select logic is inverted from spi_set_cs() */ + if (chip && chip->cs_control) + chip->cs_control(!enable); + + if (!enable) + dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select)); +} + /* Return the max entries we can fill into tx fifo */ static inline u32 tx_max(struct dw_spi *dws) { u32 tx_left, tx_room, rxtx_gap; tx_left = (dws->tx_end - dws->tx) / dws->n_bytes; - tx_room = dws->fifo_len - dw_readw(dws, DW_SPI_TXFLR); + tx_room = dws->fifo_len - dw_readl(dws, DW_SPI_TXFLR); /* * Another concern is about the tx/rx mismatch, we @@ -170,7 +178,7 @@ static inline u32 rx_max(struct dw_spi *dws) { u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; - return min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR)); + return min_t(u32, rx_left, dw_readl(dws, DW_SPI_RXFLR)); } static void dw_writer(struct dw_spi *dws) @@ -186,7 +194,7 @@ static void dw_writer(struct dw_spi *dws) else txw = *(u16 *)(dws->tx); } - dw_writew(dws, DW_SPI_DR, txw); + dw_writel(dws, DW_SPI_DR, txw); dws->tx += dws->n_bytes; } } @@ -197,7 +205,7 @@ static void dw_reader(struct dw_spi *dws) u16 rxw; while (max--) { - rxw = dw_readw(dws, DW_SPI_DR); + rxw = dw_readl(dws, DW_SPI_DR); /* Care rx only if the transfer's original "rx" is not null */ if (dws->rx_end - dws->len) { if (dws->n_bytes == 1) @@ -209,103 +217,22 @@ static void dw_reader(struct dw_spi *dws) } } -static void *next_transfer(struct dw_spi *dws) -{ - struct spi_message *msg = dws->cur_msg; - struct spi_transfer *trans = dws->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - dws->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, - transfer_list); - return RUNNING_STATE; - } - - return DONE_STATE; -} - -/* - * Note: first step is the protocol driver prepares - * a dma-capable memory, and this func just need translate - * the virt addr to physical - */ -static int map_dma_buffers(struct dw_spi *dws) -{ - if (!dws->cur_msg->is_dma_mapped - || !dws->dma_inited - || !dws->cur_chip->enable_dma - || !dws->dma_ops) - return 0; - - if (dws->cur_transfer->tx_dma) - dws->tx_dma = dws->cur_transfer->tx_dma; - - if (dws->cur_transfer->rx_dma) - dws->rx_dma = dws->cur_transfer->rx_dma; - - return 1; -} - -/* Caller already set message->status; dma and pio irqs are blocked */ -static void giveback(struct dw_spi *dws) -{ - struct spi_transfer *last_transfer; - struct spi_message *msg; - - msg = dws->cur_msg; - dws->cur_msg = NULL; - dws->cur_transfer = NULL; - dws->prev_chip = dws->cur_chip; - dws->cur_chip = NULL; - dws->dma_mapped = 0; - - last_transfer = list_last_entry(&msg->transfers, struct spi_transfer, - transfer_list); - - if (!last_transfer->cs_change) - spi_chip_sel(dws, msg->spi, 0); - - spi_finalize_current_message(dws->master); -} - static void int_error_stop(struct dw_spi *dws, const char *msg) { - /* Stop the hw */ - spi_enable_chip(dws, 0); + spi_reset_chip(dws); dev_err(&dws->master->dev, "%s\n", msg); - dws->cur_msg->state = ERROR_STATE; - tasklet_schedule(&dws->pump_transfers); + dws->master->cur_msg->status = -EIO; + spi_finalize_current_transfer(dws->master); } -void dw_spi_xfer_done(struct dw_spi *dws) -{ - /* Update total byte transferred return count actual bytes read */ - dws->cur_msg->actual_length += dws->len; - - /* Move to next transfer */ - dws->cur_msg->state = next_transfer(dws); - - /* Handle end of message */ - if (dws->cur_msg->state == DONE_STATE) { - dws->cur_msg->status = 0; - giveback(dws); - } else - tasklet_schedule(&dws->pump_transfers); -} -EXPORT_SYMBOL_GPL(dw_spi_xfer_done); - static irqreturn_t interrupt_transfer(struct dw_spi *dws) { - u16 irq_status = dw_readw(dws, DW_SPI_ISR); + u16 irq_status = dw_readl(dws, DW_SPI_ISR); /* Error handling */ if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { - dw_readw(dws, DW_SPI_TXOICR); - dw_readw(dws, DW_SPI_RXOICR); - dw_readw(dws, DW_SPI_RXUICR); + dw_readl(dws, DW_SPI_ICR); int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun"); return IRQ_HANDLED; } @@ -313,7 +240,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) dw_reader(dws); if (dws->rx_end == dws->rx) { spi_mask_intr(dws, SPI_INT_TXEI); - dw_spi_xfer_done(dws); + spi_finalize_current_transfer(dws->master); return IRQ_HANDLED; } if (irq_status & SPI_INT_TXEI) { @@ -328,13 +255,14 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) static irqreturn_t dw_spi_irq(int irq, void *dev_id) { - struct dw_spi *dws = dev_id; - u16 irq_status = dw_readw(dws, DW_SPI_ISR) & 0x3f; + struct spi_master *master = dev_id; + struct dw_spi *dws = spi_master_get_devdata(master); + u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f; if (!irq_status) return IRQ_NONE; - if (!dws->cur_msg) { + if (!master->cur_msg) { spi_mask_intr(dws, SPI_INT_TXEI); return IRQ_HANDLED; } @@ -343,7 +271,7 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) } /* Must be called inside pump_transfers() */ -static void poll_transfer(struct dw_spi *dws) +static int poll_transfer(struct dw_spi *dws) { do { dw_writer(dws); @@ -351,64 +279,32 @@ static void poll_transfer(struct dw_spi *dws) cpu_relax(); } while (dws->rx_end > dws->rx); - dw_spi_xfer_done(dws); + return 0; } -static void pump_transfers(unsigned long data) +static int dw_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, struct spi_transfer *transfer) { - struct dw_spi *dws = (struct dw_spi *)data; - struct spi_message *message = NULL; - struct spi_transfer *transfer = NULL; - struct spi_transfer *previous = NULL; - struct spi_device *spi = NULL; - struct chip_data *chip = NULL; - u8 bits = 0; + struct dw_spi *dws = spi_master_get_devdata(master); + struct chip_data *chip = spi_get_ctldata(spi); u8 imask = 0; - u8 cs_change = 0; - u16 txint_level = 0; + u16 txlevel = 0; u16 clk_div = 0; u32 speed = 0; u32 cr0 = 0; + int ret; - /* Get current state information */ - message = dws->cur_msg; - transfer = dws->cur_transfer; - chip = dws->cur_chip; - spi = message->spi; - - if (message->state == ERROR_STATE) { - message->status = -EIO; - goto early_exit; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - message->status = 0; - goto early_exit; - } - - /* Delay if requested at end of transfer */ - if (message->state == RUNNING_STATE) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - } - + dws->dma_mapped = 0; dws->n_bytes = chip->n_bytes; dws->dma_width = chip->dma_width; - dws->cs_control = chip->cs_control; - dws->rx_dma = transfer->rx_dma; - dws->tx_dma = transfer->tx_dma; dws->tx = (void *)transfer->tx_buf; dws->tx_end = dws->tx + transfer->len; dws->rx = transfer->rx_buf; dws->rx_end = dws->rx + transfer->len; - dws->len = dws->cur_transfer->len; - if (chip != dws->prev_chip) - cs_change = 1; + dws->len = transfer->len; + + spi_enable_chip(dws, 0); cr0 = chip->cr0; @@ -416,32 +312,37 @@ static void pump_transfers(unsigned long data) if (transfer->speed_hz) { speed = chip->speed_hz; - if ((transfer->speed_hz != speed) || (!chip->clk_div)) { + if ((transfer->speed_hz != speed) || !chip->clk_div) { speed = transfer->speed_hz; /* clk_div doesn't support odd number */ - clk_div = dws->max_freq / speed; - clk_div = (clk_div + 1) & 0xfffe; + clk_div = (dws->max_freq / speed + 1) & 0xfffe; chip->speed_hz = speed; chip->clk_div = clk_div; + + spi_set_clk(dws, chip->clk_div); } } if (transfer->bits_per_word) { - bits = transfer->bits_per_word; - dws->n_bytes = dws->dma_width = bits >> 3; - cr0 = (bits - 1) + if (transfer->bits_per_word == 8) { + dws->n_bytes = 1; + dws->dma_width = 1; + } else if (transfer->bits_per_word == 16) { + dws->n_bytes = 2; + dws->dma_width = 2; + } + cr0 = (transfer->bits_per_word - 1) | (chip->type << SPI_FRF_OFFSET) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); } - message->state = RUNNING_STATE; /* * Adjust transfer mode if necessary. Requires platform dependent * chipselect mechanism. */ - if (dws->cs_control) { + if (chip->cs_control) { if (dws->rx && dws->tx) chip->tmode = SPI_TMOD_TR; else if (dws->rx) @@ -453,80 +354,60 @@ static void pump_transfers(unsigned long data) cr0 |= (chip->tmode << SPI_TMOD_OFFSET); } + dw_writel(dws, DW_SPI_CTRL0, cr0); + /* Check if current transfer is a DMA transaction */ - dws->dma_mapped = map_dma_buffers(dws); + if (master->can_dma && master->can_dma(master, spi, transfer)) + dws->dma_mapped = master->cur_msg_mapped; + + /* For poll mode just disable all interrupts */ + spi_mask_intr(dws, 0xff); /* * Interrupt mode * we only need set the TXEI IRQ, as TX/RX always happen syncronizely */ - if (!dws->dma_mapped && !chip->poll_mode) { - int templen = dws->len / dws->n_bytes; - - txint_level = dws->fifo_len / 2; - txint_level = (templen > txint_level) ? txint_level : templen; + if (dws->dma_mapped) { + ret = dws->dma_ops->dma_setup(dws, transfer); + if (ret < 0) { + spi_enable_chip(dws, 1); + return ret; + } + } else if (!chip->poll_mode) { + txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes); + dw_writel(dws, DW_SPI_TXFLTR, txlevel); + /* Set the interrupt mask */ imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; + spi_umask_intr(dws, imask); + dws->transfer_handler = interrupt_transfer; } - /* - * Reprogram registers only if - * 1. chip select changes - * 2. clk_div is changed - * 3. control value changes - */ - if (dw_readw(dws, DW_SPI_CTRL0) != cr0 || cs_change || clk_div || imask) { - spi_enable_chip(dws, 0); - - if (dw_readw(dws, DW_SPI_CTRL0) != cr0) - dw_writew(dws, DW_SPI_CTRL0, cr0); - - spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); - spi_chip_sel(dws, spi, 1); - - /* Set the interrupt mask, for poll mode just disable all int */ - spi_mask_intr(dws, 0xff); - if (imask) - spi_umask_intr(dws, imask); - if (txint_level) - dw_writew(dws, DW_SPI_TXFLTR, txint_level); + spi_enable_chip(dws, 1); - spi_enable_chip(dws, 1); - if (cs_change) - dws->prev_chip = chip; + if (dws->dma_mapped) { + ret = dws->dma_ops->dma_transfer(dws, transfer); + if (ret < 0) + return ret; } - if (dws->dma_mapped) - dws->dma_ops->dma_transfer(dws, cs_change); - if (chip->poll_mode) - poll_transfer(dws); - - return; + return poll_transfer(dws); -early_exit: - giveback(dws); + return 1; } -static int dw_spi_transfer_one_message(struct spi_master *master, +static void dw_spi_handle_err(struct spi_master *master, struct spi_message *msg) { struct dw_spi *dws = spi_master_get_devdata(master); - dws->cur_msg = msg; - /* Initial message state */ - dws->cur_msg->state = START_STATE; - dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, - struct spi_transfer, - transfer_list); - dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); - - /* Launch transfers */ - tasklet_schedule(&dws->pump_transfers); + if (dws->dma_mapped) + dws->dma_ops->dma_stop(dws); - return 0; + spi_reset_chip(dws); } /* This may be called twice for each spi dev */ @@ -561,8 +442,6 @@ static int dw_spi_setup(struct spi_device *spi) chip->rx_threshold = 0; chip->tx_threshold = 0; - - chip->enable_dma = chip_info->enable_dma; } if (spi->bits_per_word == 8) { @@ -610,9 +489,7 @@ static void dw_spi_cleanup(struct spi_device *spi) /* Restart the controller, disable all interrupts, clean rx fifo */ static void spi_hw_init(struct device *dev, struct dw_spi *dws) { - spi_enable_chip(dws, 0); - spi_mask_intr(dws, 0xff); - spi_enable_chip(dws, 1); + spi_reset_chip(dws); /* * Try to detect the FIFO depth if not set by interface driver, @@ -622,11 +499,11 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws) u32 fifo; for (fifo = 1; fifo < 256; fifo++) { - dw_writew(dws, DW_SPI_TXFLTR, fifo); - if (fifo != dw_readw(dws, DW_SPI_TXFLTR)) + dw_writel(dws, DW_SPI_TXFLTR, fifo); + if (fifo != dw_readl(dws, DW_SPI_TXFLTR)) break; } - dw_writew(dws, DW_SPI_TXFLTR, 0); + dw_writel(dws, DW_SPI_TXFLTR, 0); dws->fifo_len = (fifo == 1) ? 0 : fifo; dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len); @@ -646,13 +523,12 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) dws->master = master; dws->type = SSI_MOTO_SPI; - dws->prev_chip = NULL; dws->dma_inited = 0; dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num); ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED, - dws->name, dws); + dws->name, master); if (ret < 0) { dev_err(&master->dev, "can not get IRQ\n"); goto err_free_master; @@ -664,7 +540,9 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) master->num_chipselect = dws->num_cs; master->setup = dw_spi_setup; master->cleanup = dw_spi_cleanup; - master->transfer_one_message = dw_spi_transfer_one_message; + master->set_cs = dw_spi_set_cs; + master->transfer_one = dw_spi_transfer_one; + master->handle_err = dw_spi_handle_err; master->max_speed_hz = dws->max_freq; master->dev.of_node = dev->of_node; @@ -676,11 +554,11 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) if (ret) { dev_warn(dev, "DMA init failed\n"); dws->dma_inited = 0; + } else { + master->can_dma = dws->dma_ops->can_dma; } } - tasklet_init(&dws->pump_transfers, pump_transfers, (unsigned long)dws); - spi_master_set_devdata(master, dws); ret = devm_spi_register_master(dev, master); if (ret) { diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 3d32be68c142..6c91391c1a4f 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -91,12 +91,15 @@ struct dw_spi; struct dw_spi_dma_ops { int (*dma_init)(struct dw_spi *dws); void (*dma_exit)(struct dw_spi *dws); - int (*dma_transfer)(struct dw_spi *dws, int cs_change); + int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer); + bool (*can_dma)(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer); + int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer); + void (*dma_stop)(struct dw_spi *dws); }; struct dw_spi { struct spi_master *master; - struct spi_device *cur_dev; enum dw_ssi_type type; char name[16]; @@ -109,41 +112,26 @@ struct dw_spi { u16 bus_num; u16 num_cs; /* supported slave numbers */ - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - /* Current message transfer state info */ - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; - struct chip_data *prev_chip; size_t len; void *tx; void *tx_end; void *rx; void *rx_end; int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; u8 n_bytes; /* current is a 1/2 bytes op */ - u8 max_bits_per_word; /* maxim is 16b */ u32 dma_width; irqreturn_t (*transfer_handler)(struct dw_spi *dws); - void (*cs_control)(u32 command); - /* Dma info */ + /* DMA info */ int dma_inited; struct dma_chan *txchan; - struct scatterlist tx_sgl; struct dma_chan *rxchan; - struct scatterlist rx_sgl; unsigned long dma_chan_busy; - struct device *dma_dev; dma_addr_t dma_addr; /* phy address of the Data register */ struct dw_spi_dma_ops *dma_ops; - void *dma_priv; /* platform relate info */ + void *dma_tx; + void *dma_rx; /* Bus interface info */ void *priv; @@ -162,16 +150,6 @@ static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val) __raw_writel(val, dws->regs + offset); } -static inline u16 dw_readw(struct dw_spi *dws, u32 offset) -{ - return __raw_readw(dws->regs + offset); -} - -static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val) -{ - __raw_writew(val, dws->regs + offset); -} - static inline void spi_enable_chip(struct dw_spi *dws, int enable) { dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0)); @@ -182,22 +160,6 @@ static inline void spi_set_clk(struct dw_spi *dws, u16 div) dw_writel(dws, DW_SPI_BAUDR, div); } -static inline void spi_chip_sel(struct dw_spi *dws, struct spi_device *spi, - int active) -{ - u16 cs = spi->chip_select; - int gpio_val = active ? (spi->mode & SPI_CS_HIGH) : - !(spi->mode & SPI_CS_HIGH); - - if (dws->cs_control) - dws->cs_control(active); - if (gpio_is_valid(spi->cs_gpio)) - gpio_set_value(spi->cs_gpio, gpio_val); - - if (active) - dw_writel(dws, DW_SPI_SER, 1 << cs); -} - /* Disable IRQ bits */ static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) { @@ -217,15 +179,26 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) } /* + * This does disable the SPI controller, interrupts, and re-enable the + * controller back. Transmit and receive FIFO buffers are cleared when the + * device is disabled. + */ +static inline void spi_reset_chip(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); +} + +/* * Each SPI slave device to work with dw_api controller should - * has such a structure claiming its working mode (PIO/DMA etc), + * has such a structure claiming its working mode (poll or PIO/DMA), * which can be save in the "controller_data" member of the * struct spi_device. */ struct dw_spi_chip { u8 poll_mode; /* 1 for controller polling mode */ u8 type; /* SPI/SSP/MicroWire */ - u8 enable_dma; void (*cs_control)(u32 command); }; @@ -233,7 +206,6 @@ extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws); extern void dw_spi_remove_host(struct dw_spi *dws); extern int dw_spi_suspend_host(struct dw_spi *dws); extern int dw_spi_resume_host(struct dw_spi *dws); -extern void dw_spi_xfer_done(struct dw_spi *dws); /* platform related setup */ extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index d1a39249704a..5fe54cda309f 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -20,6 +20,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -29,6 +30,7 @@ #include <linux/sched.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> +#include <linux/time.h> #define DRIVER_NAME "fsl-dspi" @@ -51,7 +53,7 @@ #define SPI_CTAR_CPOL(x) ((x) << 26) #define SPI_CTAR_CPHA(x) ((x) << 25) #define SPI_CTAR_LSBFE(x) ((x) << 24) -#define SPI_CTAR_PCSSCR(x) (((x) & 0x00000003) << 22) +#define SPI_CTAR_PCSSCK(x) (((x) & 0x00000003) << 22) #define SPI_CTAR_PASC(x) (((x) & 0x00000003) << 20) #define SPI_CTAR_PDT(x) (((x) & 0x00000003) << 18) #define SPI_CTAR_PBR(x) (((x) & 0x00000003) << 16) @@ -59,6 +61,7 @@ #define SPI_CTAR_ASC(x) (((x) & 0x0000000f) << 8) #define SPI_CTAR_DT(x) (((x) & 0x0000000f) << 4) #define SPI_CTAR_BR(x) ((x) & 0x0000000f) +#define SPI_CTAR_SCALE_BITS 0xf #define SPI_CTAR0_SLAVE 0x0c @@ -148,23 +151,66 @@ static void hz_to_spi_baud(char *pbr, char *br, int speed_hz, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 }; - int temp, i = 0, j = 0; + int scale_needed, scale, minscale = INT_MAX; + int i, j; + + scale_needed = clkrate / speed_hz; + if (clkrate % speed_hz) + scale_needed++; + + for (i = 0; i < ARRAY_SIZE(brs); i++) + for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) { + scale = brs[i] * pbr_tbl[j]; + if (scale >= scale_needed) { + if (scale < minscale) { + minscale = scale; + *br = i; + *pbr = j; + } + break; + } + } - temp = clkrate / 2 / speed_hz; + if (minscale == INT_MAX) { + pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n", + speed_hz, clkrate); + *pbr = ARRAY_SIZE(pbr_tbl) - 1; + *br = ARRAY_SIZE(brs) - 1; + } +} - for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++) - for (j = 0; j < ARRAY_SIZE(brs); j++) { - if (pbr_tbl[i] * brs[j] >= temp) { - *pbr = i; - *br = j; - return; +static void ns_delay_scale(char *psc, char *sc, int delay_ns, + unsigned long clkrate) +{ + int pscale_tbl[4] = {1, 3, 5, 7}; + int scale_needed, scale, minscale = INT_MAX; + int i, j; + u32 remainder; + + scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC, + &remainder); + if (remainder) + scale_needed++; + + for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++) + for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) { + scale = pscale_tbl[i] * (2 << j); + if (scale >= scale_needed) { + if (scale < minscale) { + minscale = scale; + *psc = i; + *sc = j; + } + break; } } - pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld\ - ,we use the max prescaler value.\n", speed_hz, clkrate); - *pbr = ARRAY_SIZE(pbr_tbl) - 1; - *br = ARRAY_SIZE(brs) - 1; + if (minscale == INT_MAX) { + pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value", + delay_ns, clkrate); + *psc = ARRAY_SIZE(pscale_tbl) - 1; + *sc = SPI_CTAR_SCALE_BITS; + } } static int dspi_transfer_write(struct fsl_dspi *dspi) @@ -345,7 +391,10 @@ static int dspi_setup(struct spi_device *spi) { struct chip_data *chip; struct fsl_dspi *dspi = spi_master_get_devdata(spi->master); - unsigned char br = 0, pbr = 0, fmsz = 0; + u32 cs_sck_delay = 0, sck_cs_delay = 0; + unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0; + unsigned char pasc = 0, asc = 0, fmsz = 0; + unsigned long clkrate; if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) { fmsz = spi->bits_per_word - 1; @@ -362,18 +411,34 @@ static int dspi_setup(struct spi_device *spi) return -ENOMEM; } + of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay", + &cs_sck_delay); + + of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay", + &sck_cs_delay); + chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS | SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF; chip->void_write_data = 0; - hz_to_spi_baud(&pbr, &br, - spi->max_speed_hz, clk_get_rate(dspi->clk)); + clkrate = clk_get_rate(dspi->clk); + hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate); + + /* Set PCS to SCK delay scale values */ + ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate); + + /* Set After SCK delay scale values */ + ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate); chip->ctar_val = SPI_CTAR_FMSZ(fmsz) | SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0) | SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0) | SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0) + | SPI_CTAR_PCSSCK(pcssck) + | SPI_CTAR_CSSCK(cssck) + | SPI_CTAR_PASC(pasc) + | SPI_CTAR_ASC(asc) | SPI_CTAR_PBR(pbr) | SPI_CTAR_BR(br); diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index e649bc7d4c08..788e2b176a4f 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/dmaengine.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -122,36 +123,31 @@ static inline void spfi_start(struct img_spfi *spfi) spfi_writel(spfi, val, SPFI_CONTROL); } -static inline void spfi_stop(struct img_spfi *spfi) -{ - u32 val; - - val = spfi_readl(spfi, SPFI_CONTROL); - val &= ~SPFI_CONTROL_SPFI_EN; - spfi_writel(spfi, val, SPFI_CONTROL); -} - static inline void spfi_reset(struct img_spfi *spfi) { spfi_writel(spfi, SPFI_CONTROL_SOFT_RESET, SPFI_CONTROL); - udelay(1); spfi_writel(spfi, 0, SPFI_CONTROL); } -static void spfi_flush_tx_fifo(struct img_spfi *spfi) +static int spfi_wait_all_done(struct img_spfi *spfi) { - unsigned long timeout = jiffies + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(50); - spfi_writel(spfi, SPFI_INTERRUPT_SDE, SPFI_INTERRUPT_CLEAR); while (time_before(jiffies, timeout)) { - if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & - SPFI_INTERRUPT_SDE) - return; + u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + + if (status & SPFI_INTERRUPT_ALLDONETRIG) { + spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG, + SPFI_INTERRUPT_CLEAR); + return 0; + } cpu_relax(); } - dev_err(spfi->dev, "Timed out waiting for FIFO to drain\n"); + dev_err(spfi->dev, "Timed out waiting for transaction to complete\n"); spfi_reset(spfi); + + return -ETIMEDOUT; } static unsigned int spfi_pio_write32(struct img_spfi *spfi, const u32 *buf, @@ -237,6 +233,7 @@ static int img_spfi_start_pio(struct spi_master *master, const void *tx_buf = xfer->tx_buf; void *rx_buf = xfer->rx_buf; unsigned long timeout; + int ret; if (tx_buf) tx_bytes = xfer->len; @@ -269,16 +266,15 @@ static int img_spfi_start_pio(struct spi_master *master, cpu_relax(); } + ret = spfi_wait_all_done(spfi); + if (ret < 0) + return ret; + if (rx_bytes > 0 || tx_bytes > 0) { dev_err(spfi->dev, "PIO transfer timed out\n"); - spfi_reset(spfi); return -ETIMEDOUT; } - if (tx_buf) - spfi_flush_tx_fifo(spfi); - spfi_stop(spfi); - return 0; } @@ -287,14 +283,12 @@ static void img_spfi_dma_rx_cb(void *data) struct img_spfi *spfi = data; unsigned long flags; - spin_lock_irqsave(&spfi->lock, flags); + spfi_wait_all_done(spfi); + spin_lock_irqsave(&spfi->lock, flags); spfi->rx_dma_busy = false; - if (!spfi->tx_dma_busy) { - spfi_stop(spfi); + if (!spfi->tx_dma_busy) spi_finalize_current_transfer(spfi->master); - } - spin_unlock_irqrestore(&spfi->lock, flags); } @@ -303,16 +297,12 @@ static void img_spfi_dma_tx_cb(void *data) struct img_spfi *spfi = data; unsigned long flags; - spfi_flush_tx_fifo(spfi); + spfi_wait_all_done(spfi); spin_lock_irqsave(&spfi->lock, flags); - spfi->tx_dma_busy = false; - if (!spfi->rx_dma_busy) { - spfi_stop(spfi); + if (!spfi->rx_dma_busy) spi_finalize_current_transfer(spfi->master); - } - spin_unlock_irqrestore(&spfi->lock, flags); } @@ -397,6 +387,75 @@ stop_dma: return -EIO; } +static void img_spfi_handle_err(struct spi_master *master, + struct spi_message *msg) +{ + struct img_spfi *spfi = spi_master_get_devdata(master); + unsigned long flags; + + /* + * Stop all DMA and reset the controller if the previous transaction + * timed-out and never completed it's DMA. + */ + spin_lock_irqsave(&spfi->lock, flags); + if (spfi->tx_dma_busy || spfi->rx_dma_busy) { + spfi->tx_dma_busy = false; + spfi->rx_dma_busy = false; + + dmaengine_terminate_all(spfi->tx_ch); + dmaengine_terminate_all(spfi->rx_ch); + } + spin_unlock_irqrestore(&spfi->lock, flags); +} + +static int img_spfi_prepare(struct spi_master *master, struct spi_message *msg) +{ + struct img_spfi *spfi = spi_master_get_devdata(master); + u32 val; + + val = spfi_readl(spfi, SPFI_PORT_STATE); + if (msg->spi->mode & SPI_CPHA) + val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select); + else + val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select); + if (msg->spi->mode & SPI_CPOL) + val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select); + else + val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select); + spfi_writel(spfi, val, SPFI_PORT_STATE); + + return 0; +} + +static int img_spfi_unprepare(struct spi_master *master, + struct spi_message *msg) +{ + struct img_spfi *spfi = spi_master_get_devdata(master); + + spfi_reset(spfi); + + return 0; +} + +static int img_spfi_setup(struct spi_device *spi) +{ + int ret; + + ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? + GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, + dev_name(&spi->dev)); + if (ret) + dev_err(&spi->dev, "can't request chipselect gpio %d\n", + spi->cs_gpio); + + return ret; +} + +static void img_spfi_cleanup(struct spi_device *spi) +{ + gpio_free(spi->cs_gpio); +} + static void img_spfi_config(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { @@ -405,10 +464,10 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi, /* * output = spfi_clk * (BITCLK / 512), where BITCLK must be a - * power of 2 up to 256 (where 255 == 256 since BITCLK is 8 bits) + * power of 2 up to 128 */ - div = DIV_ROUND_UP(master->max_speed_hz, xfer->speed_hz); - div = clamp(512 / (1 << get_count_order(div)), 1, 255); + div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz); + div = clamp(512 / (1 << get_count_order(div)), 1, 128); val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select)); val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK << @@ -416,6 +475,9 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi, val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT; spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select)); + spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT, + SPFI_TRANSACTION); + val = spfi_readl(spfi, SPFI_CONTROL); val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA); if (xfer->tx_buf) @@ -429,25 +491,7 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi, else if (xfer->tx_nbits == SPI_NBITS_QUAD && xfer->rx_nbits == SPI_NBITS_QUAD) val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT; - val &= ~SPFI_CONTROL_CONTINUE; - if (!xfer->cs_change && !list_is_last(&xfer->transfer_list, - &master->cur_msg->transfers)) - val |= SPFI_CONTROL_CONTINUE; spfi_writel(spfi, val, SPFI_CONTROL); - - val = spfi_readl(spfi, SPFI_PORT_STATE); - if (spi->mode & SPI_CPHA) - val |= SPFI_PORT_STATE_CK_PHASE(spi->chip_select); - else - val &= ~SPFI_PORT_STATE_CK_PHASE(spi->chip_select); - if (spi->mode & SPI_CPOL) - val |= SPFI_PORT_STATE_CK_POL(spi->chip_select); - else - val &= ~SPFI_PORT_STATE_CK_POL(spi->chip_select); - spfi_writel(spfi, val, SPFI_PORT_STATE); - - spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT, - SPFI_TRANSACTION); } static int img_spfi_transfer_one(struct spi_master *master, @@ -455,8 +499,6 @@ static int img_spfi_transfer_one(struct spi_master *master, struct spi_transfer *xfer) { struct img_spfi *spfi = spi_master_get_devdata(spi->master); - bool dma_reset = false; - unsigned long flags; int ret; if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) { @@ -466,23 +508,6 @@ static int img_spfi_transfer_one(struct spi_master *master, return -EINVAL; } - /* - * Stop all DMA and reset the controller if the previous transaction - * timed-out and never completed it's DMA. - */ - spin_lock_irqsave(&spfi->lock, flags); - if (spfi->tx_dma_busy || spfi->rx_dma_busy) { - dev_err(spfi->dev, "SPI DMA still busy\n"); - dma_reset = true; - } - spin_unlock_irqrestore(&spfi->lock, flags); - - if (dma_reset) { - dmaengine_terminate_all(spfi->tx_ch); - dmaengine_terminate_all(spfi->rx_ch); - spfi_reset(spfi); - } - img_spfi_config(master, spi, xfer); if (master->can_dma && master->can_dma(master, spi, xfer)) ret = img_spfi_start_dma(master, spi, xfer); @@ -492,17 +517,6 @@ static int img_spfi_transfer_one(struct spi_master *master, return ret; } -static void img_spfi_set_cs(struct spi_device *spi, bool enable) -{ - struct img_spfi *spfi = spi_master_get_devdata(spi->master); - u32 val; - - val = spfi_readl(spfi, SPFI_PORT_STATE); - val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << SPFI_PORT_STATE_DEV_SEL_SHIFT); - val |= spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT; - spfi_writel(spfi, val, SPFI_PORT_STATE); -} - static bool img_spfi_can_dma(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { @@ -591,14 +605,17 @@ static int img_spfi_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL; if (of_property_read_bool(spfi->dev->of_node, "img,supports-quad-mode")) master->mode_bits |= SPI_TX_QUAD | SPI_RX_QUAD; - master->num_chipselect = 5; master->dev.of_node = pdev->dev.of_node; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8); - master->max_speed_hz = clk_get_rate(spfi->spfi_clk); - master->min_speed_hz = master->max_speed_hz / 512; + master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4; + master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512; - master->set_cs = img_spfi_set_cs; + master->setup = img_spfi_setup; + master->cleanup = img_spfi_cleanup; master->transfer_one = img_spfi_transfer_one; + master->prepare_message = img_spfi_prepare; + master->unprepare_message = img_spfi_unprepare; + master->handle_err = img_spfi_handle_err; spfi->tx_ch = dma_request_slave_channel(spfi->dev, "tx"); spfi->rx_ch = dma_request_slave_channel(spfi->dev, "rx"); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 6fea4af51c41..f08e812b2984 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -370,8 +370,6 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, if (spi_imx->dma_is_inited) { dma = readl(spi_imx->base + MX51_ECSPI_DMA); - spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2; - spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2; spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2; rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET; tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET; @@ -868,6 +866,8 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, master->max_dma_len = MAX_SDMA_BD_BYTES; spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; + spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2; + spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2; spi_imx->dma_is_inited = 1; return 0; @@ -903,7 +903,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, if (tx) { desc_tx = dmaengine_prep_slave_sg(master->dma_tx, - tx->sgl, tx->nents, DMA_TO_DEVICE, + tx->sgl, tx->nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_tx) goto no_dma; @@ -915,7 +915,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, if (rx) { desc_rx = dmaengine_prep_slave_sg(master->dma_rx, - rx->sgl, rx->nents, DMA_FROM_DEVICE, + rx->sgl, rx->nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_rx) goto no_dma; diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index ecae0d4e2945..965d2bdcfdcc 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -588,7 +588,7 @@ static int mpc512x_psc_spi_of_remove(struct platform_device *op) return mpc512x_psc_spi_do_remove(&op->dev); } -static struct of_device_id mpc512x_psc_spi_of_match[] = { +static const struct of_device_id mpc512x_psc_spi_of_match[] = { { .compatible = "fsl,mpc5121-psc-spi", }, {}, }; diff --git a/drivers/spi/spi-octeon.c b/drivers/spi/spi-octeon.c index b283d537d16a..e99d6a93d394 100644 --- a/drivers/spi/spi-octeon.c +++ b/drivers/spi/spi-octeon.c @@ -238,7 +238,7 @@ static int octeon_spi_remove(struct platform_device *pdev) return 0; } -static struct of_device_id octeon_spi_match[] = { +static const struct of_device_id octeon_spi_match[] = { { .compatible = "cavium,octeon-3010-spi", }, {}, }; diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index d890d309dff9..35b332dacb13 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -24,6 +24,7 @@ #include <linux/device.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> @@ -294,16 +295,6 @@ static int omap1_spi100k_setup(struct spi_device *spi) return ret; } -static int omap1_spi100k_prepare_hardware(struct spi_master *master) -{ - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - clk_prepare_enable(spi100k->ick); - clk_prepare_enable(spi100k->fck); - - return 0; -} - static int omap1_spi100k_transfer_one_message(struct spi_master *master, struct spi_message *m) { @@ -372,16 +363,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, return status; } -static int omap1_spi100k_unprepare_hardware(struct spi_master *master) -{ - struct omap1_spi100k *spi100k = spi_master_get_devdata(master); - - clk_disable_unprepare(spi100k->ick); - clk_disable_unprepare(spi100k->fck); - - return 0; -} - static int omap1_spi100k_probe(struct platform_device *pdev) { struct spi_master *master; @@ -402,14 +383,12 @@ static int omap1_spi100k_probe(struct platform_device *pdev) master->setup = omap1_spi100k_setup; master->transfer_one_message = omap1_spi100k_transfer_one_message; - master->prepare_transfer_hardware = omap1_spi100k_prepare_hardware; - master->unprepare_transfer_hardware = omap1_spi100k_unprepare_hardware; - master->cleanup = NULL; master->num_chipselect = 2; master->mode_bits = MODEBITS; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16); master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ; + master->auto_runtime_pm = true; spi100k = spi_master_get_devdata(master); @@ -434,22 +413,96 @@ static int omap1_spi100k_probe(struct platform_device *pdev) goto err; } + status = clk_prepare_enable(spi100k->ick); + if (status != 0) { + dev_err(&pdev->dev, "failed to enable ick: %d\n", status); + goto err; + } + + status = clk_prepare_enable(spi100k->fck); + if (status != 0) { + dev_err(&pdev->dev, "failed to enable fck: %d\n", status); + goto err_ick; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + status = devm_spi_register_master(&pdev->dev, master); if (status < 0) - goto err; + goto err_fck; return status; +err_fck: + clk_disable_unprepare(spi100k->fck); +err_ick: + clk_disable_unprepare(spi100k->ick); err: spi_master_put(master); return status; } +static int omap1_spi100k_remove(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + pm_runtime_disable(&pdev->dev); + + clk_disable_unprepare(spi100k->fck); + clk_disable_unprepare(spi100k->ick); + + return 0; +} + +#ifdef CONFIG_PM +static int omap1_spi100k_runtime_suspend(struct device *dev) +{ + struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + clk_disable_unprepare(spi100k->ick); + clk_disable_unprepare(spi100k->fck); + + return 0; +} + +static int omap1_spi100k_runtime_resume(struct device *dev) +{ + struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + int ret; + + ret = clk_prepare_enable(spi100k->ick); + if (ret != 0) { + dev_err(dev, "Failed to enable ick: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(spi100k->fck); + if (ret != 0) { + dev_err(dev, "Failed to enable fck: %d\n", ret); + clk_disable_unprepare(spi100k->ick); + return ret; + } + + return 0; +} +#endif + +static const struct dev_pm_ops omap1_spi100k_pm = { + SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend, + omap1_spi100k_runtime_resume, NULL) +}; + static struct platform_driver omap1_spi100k_driver = { .driver = { .name = "omap1_spi100k", + .pm = &omap1_spi100k_pm, }, .probe = omap1_spi100k_probe, + .remove = omap1_spi100k_remove, }; module_platform_driver(omap1_spi100k_driver); diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 3c0844457c07..55576db31549 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -44,7 +44,6 @@ #include <linux/module.h> #include <linux/io.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index ee513a85296b..94af80676684 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -285,7 +285,12 @@ */ #define DEFAULT_SSP_REG_IMSC 0x0UL #define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC -#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC) +#define ENABLE_ALL_INTERRUPTS ( \ + SSP_IMSC_MASK_RORIM | \ + SSP_IMSC_MASK_RTIM | \ + SSP_IMSC_MASK_RXIM | \ + SSP_IMSC_MASK_TXIM \ +) #define CLEAR_ALL_INTERRUPTS 0x3 @@ -1251,7 +1256,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) struct pl022 *pl022 = dev_id; struct spi_message *msg = pl022->cur_msg; u16 irq_status = 0; - u16 flag = 0; if (unlikely(!msg)) { dev_err(&pl022->adev->dev, @@ -1280,9 +1284,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) dev_err(&pl022->adev->dev, "RXFIFO is full\n"); - if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF) - dev_err(&pl022->adev->dev, - "TXFIFO is full\n"); /* * Disable and clear interrupts, disable SSP, @@ -1303,8 +1304,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) readwriter(pl022); - if ((pl022->tx == pl022->tx_end) && (flag == 0)) { - flag = 1; + if (pl022->tx == pl022->tx_end) { /* Disable Transmit interrupt, enable receive interrupt */ writew((readw(SSP_IMSC(pl022->virtbase)) & ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM, diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 6f72ad01e041..e3223ac75a7c 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -20,6 +20,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/spi.h> @@ -30,10 +31,6 @@ #include <linux/pm_runtime.h> #include <linux/acpi.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/delay.h> - #include "spi-pxa2xx.h" MODULE_AUTHOR("Stephen Street"); @@ -67,54 +64,6 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define LPSS_TX_LOTHRESH_DFLT 160 #define LPSS_TX_HITHRESH_DFLT 224 -struct quark_spi_rate { - u32 bitrate; - u32 dds_clk_rate; - u32 clk_div; -}; - -/* - * 'rate', 'dds', 'clk_div' lookup table, which is defined in - * the Quark SPI datasheet. - */ -static const struct quark_spi_rate quark_spi_rate_table[] = { -/* bitrate, dds_clk_rate, clk_div */ - {50000000, 0x800000, 0}, - {40000000, 0x666666, 0}, - {25000000, 0x400000, 0}, - {20000000, 0x666666, 1}, - {16667000, 0x800000, 2}, - {13333000, 0x666666, 2}, - {12500000, 0x200000, 0}, - {10000000, 0x800000, 4}, - {8000000, 0x666666, 4}, - {6250000, 0x400000, 3}, - {5000000, 0x400000, 4}, - {4000000, 0x666666, 9}, - {3125000, 0x80000, 0}, - {2500000, 0x400000, 9}, - {2000000, 0x666666, 19}, - {1563000, 0x40000, 0}, - {1250000, 0x200000, 9}, - {1000000, 0x400000, 24}, - {800000, 0x666666, 49}, - {781250, 0x20000, 0}, - {625000, 0x200000, 19}, - {500000, 0x400000, 49}, - {400000, 0x666666, 99}, - {390625, 0x10000, 0}, - {250000, 0x400000, 99}, - {200000, 0x666666, 199}, - {195313, 0x8000, 0}, - {125000, 0x100000, 49}, - {100000, 0x200000, 124}, - {50000, 0x100000, 124}, - {25000, 0x80000, 124}, - {10016, 0x20000, 77}, - {5040, 0x20000, 154}, - {1002, 0x8000, 194}, -}; - /* Offset from drv_data->lpss_base */ #define GENERAL_REG 0x08 #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) @@ -701,25 +650,124 @@ static irqreturn_t ssp_int(int irq, void *dev_id) } /* - * The Quark SPI data sheet gives a table, and for the given 'rate', - * the 'dds' and 'clk_div' can be found in the table. + * The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply + * input frequency by fractions of 2^24. It also has a divider by 5. + * + * There are formulas to get baud rate value for given input frequency and + * divider parameters, such as DDS_CLK_RATE and SCR: + * + * Fsys = 200MHz + * + * Fssp = Fsys * DDS_CLK_RATE / 2^24 (1) + * Baud rate = Fsclk = Fssp / (2 * (SCR + 1)) (2) + * + * DDS_CLK_RATE either 2^n or 2^n / 5. + * SCR is in range 0 .. 255 + * + * Divisor = 5^i * 2^j * 2 * k + * i = [0, 1] i = 1 iff j = 0 or j > 3 + * j = [0, 23] j = 0 iff i = 1 + * k = [1, 256] + * Special case: j = 0, i = 1: Divisor = 2 / 5 + * + * Accordingly to the specification the recommended values for DDS_CLK_RATE + * are: + * Case 1: 2^n, n = [0, 23] + * Case 2: 2^24 * 2 / 5 (0x666666) + * Case 3: less than or equal to 2^24 / 5 / 16 (0x33333) + * + * In all cases the lowest possible value is better. + * + * The function calculates parameters for all cases and chooses the one closest + * to the asked baud rate. */ -static u32 quark_x1000_set_clk_regvals(u32 rate, u32 *dds, u32 *clk_div) +static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) { - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(quark_spi_rate_table); i++) { - if (rate >= quark_spi_rate_table[i].bitrate) { - *dds = quark_spi_rate_table[i].dds_clk_rate; - *clk_div = quark_spi_rate_table[i].clk_div; - return quark_spi_rate_table[i].bitrate; + unsigned long xtal = 200000000; + unsigned long fref = xtal / 2; /* mandatory division by 2, + see (2) */ + /* case 3 */ + unsigned long fref1 = fref / 2; /* case 1 */ + unsigned long fref2 = fref * 2 / 5; /* case 2 */ + unsigned long scale; + unsigned long q, q1, q2; + long r, r1, r2; + u32 mul; + + /* Case 1 */ + + /* Set initial value for DDS_CLK_RATE */ + mul = (1 << 24) >> 1; + + /* Calculate initial quot */ + q1 = DIV_ROUND_CLOSEST(fref1, rate); + + /* Scale q1 if it's too big */ + if (q1 > 256) { + /* Scale q1 to range [1, 512] */ + scale = fls_long(q1 - 1); + if (scale > 9) { + q1 >>= scale - 9; + mul >>= scale - 9; } + + /* Round the result if we have a remainder */ + q1 += q1 & 1; } - *dds = quark_spi_rate_table[i-1].dds_clk_rate; - *clk_div = quark_spi_rate_table[i-1].clk_div; + /* Decrease DDS_CLK_RATE as much as we can without loss in precision */ + scale = __ffs(q1); + q1 >>= scale; + mul >>= scale; + + /* Get the remainder */ + r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate); + + /* Case 2 */ + + q2 = DIV_ROUND_CLOSEST(fref2, rate); + r2 = abs(fref2 / q2 - rate); - return quark_spi_rate_table[i-1].bitrate; + /* + * Choose the best between two: less remainder we have the better. We + * can't go case 2 if q2 is greater than 256 since SCR register can + * hold only values 0 .. 255. + */ + if (r2 >= r1 || q2 > 256) { + /* case 1 is better */ + r = r1; + q = q1; + } else { + /* case 2 is better */ + r = r2; + q = q2; + mul = (1 << 24) * 2 / 5; + } + + /* Check case 3 only If the divisor is big enough */ + if (fref / rate >= 80) { + u64 fssp; + u32 m; + + /* Calculate initial quot */ + q1 = DIV_ROUND_CLOSEST(fref, rate); + m = (1 << 24) / q1; + + /* Get the remainder */ + fssp = (u64)fref * m; + do_div(fssp, 1 << 24); + r1 = abs(fssp - rate); + + /* Choose this one if it suits better */ + if (r1 < r) { + /* case 3 is better */ + q = 1; + mul = m; + } + } + + *dds = mul; + return q - 1; } static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) @@ -730,23 +778,25 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) rate = min_t(int, ssp_clk, rate); if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) - return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; + return (ssp_clk / (2 * rate) - 1) & 0xff; else - return ((ssp_clk / rate - 1) & 0xfff) << 8; + return (ssp_clk / rate - 1) & 0xfff; } static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data, struct chip_data *chip, int rate) { - u32 clk_div; + unsigned int clk_div; switch (drv_data->ssp_type) { case QUARK_X1000_SSP: - quark_x1000_set_clk_regvals(rate, &chip->dds_rate, &clk_div); - return clk_div << 8; + clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate); + break; default: - return ssp_get_clk_div(drv_data, rate); + clk_div = ssp_get_clk_div(drv_data, rate); + break; } + return clk_div << 8; } static void pump_transfers(unsigned long data) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 2b2c359f5a50..810a7fae3479 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -22,6 +22,8 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #define QUP_CONFIG 0x0000 #define QUP_STATE 0x0004 @@ -116,6 +118,8 @@ #define SPI_NUM_CHIPSELECTS 4 +#define SPI_MAX_DMA_XFER (SZ_64K - 64) + /* high speed mode is when bus rate is greater then 26MHz */ #define SPI_HS_MIN_RATE 26000000 #define SPI_MAX_RATE 50000000 @@ -140,9 +144,14 @@ struct spi_qup { struct completion done; int error; int w_size; /* bytes per SPI word */ + int n_words; int tx_bytes; int rx_bytes; int qup_v1; + + int use_dma; + struct dma_slave_config rx_conf; + struct dma_slave_config tx_conf; }; @@ -198,7 +207,6 @@ static int spi_qup_set_state(struct spi_qup *controller, u32 state) return 0; } - static void spi_qup_fifo_read(struct spi_qup *controller, struct spi_transfer *xfer) { @@ -266,6 +274,107 @@ static void spi_qup_fifo_write(struct spi_qup *controller, } } +static void spi_qup_dma_done(void *data) +{ + struct spi_qup *qup = data; + + complete(&qup->done); +} + +static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer, + enum dma_transfer_direction dir, + dma_async_tx_callback callback) +{ + struct spi_qup *qup = spi_master_get_devdata(master); + unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sgl; + struct dma_chan *chan; + dma_cookie_t cookie; + unsigned int nents; + + if (dir == DMA_MEM_TO_DEV) { + chan = master->dma_tx; + nents = xfer->tx_sg.nents; + sgl = xfer->tx_sg.sgl; + } else { + chan = master->dma_rx; + nents = xfer->rx_sg.nents; + sgl = xfer->rx_sg.sgl; + } + + desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags); + if (!desc) + return -EINVAL; + + desc->callback = callback; + desc->callback_param = qup; + + cookie = dmaengine_submit(desc); + + return dma_submit_error(cookie); +} + +static void spi_qup_dma_terminate(struct spi_master *master, + struct spi_transfer *xfer) +{ + if (xfer->tx_buf) + dmaengine_terminate_all(master->dma_tx); + if (xfer->rx_buf) + dmaengine_terminate_all(master->dma_rx); +} + +static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer) +{ + dma_async_tx_callback rx_done = NULL, tx_done = NULL; + int ret; + + if (xfer->rx_buf) + rx_done = spi_qup_dma_done; + else if (xfer->tx_buf) + tx_done = spi_qup_dma_done; + + if (xfer->rx_buf) { + ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done); + if (ret) + return ret; + + dma_async_issue_pending(master->dma_rx); + } + + if (xfer->tx_buf) { + ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done); + if (ret) + return ret; + + dma_async_issue_pending(master->dma_tx); + } + + return 0; +} + +static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer) +{ + struct spi_qup *qup = spi_master_get_devdata(master); + int ret; + + ret = spi_qup_set_state(qup, QUP_STATE_RUN); + if (ret) { + dev_warn(qup->dev, "cannot set RUN state\n"); + return ret; + } + + ret = spi_qup_set_state(qup, QUP_STATE_PAUSE); + if (ret) { + dev_warn(qup->dev, "cannot set PAUSE state\n"); + return ret; + } + + spi_qup_fifo_write(qup, xfer); + + return 0; +} + static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) { struct spi_qup *controller = dev_id; @@ -315,11 +424,13 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) error = -EIO; } - if (opflags & QUP_OP_IN_SERVICE_FLAG) - spi_qup_fifo_read(controller, xfer); + if (!controller->use_dma) { + if (opflags & QUP_OP_IN_SERVICE_FLAG) + spi_qup_fifo_read(controller, xfer); - if (opflags & QUP_OP_OUT_SERVICE_FLAG) - spi_qup_fifo_write(controller, xfer); + if (opflags & QUP_OP_OUT_SERVICE_FLAG) + spi_qup_fifo_write(controller, xfer); + } spin_lock_irqsave(&controller->lock, flags); controller->error = error; @@ -332,13 +443,35 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static u32 +spi_qup_get_mode(struct spi_master *master, struct spi_transfer *xfer) +{ + struct spi_qup *qup = spi_master_get_devdata(master); + u32 mode; + + qup->w_size = 4; + + if (xfer->bits_per_word <= 8) + qup->w_size = 1; + else if (xfer->bits_per_word <= 16) + qup->w_size = 2; + + qup->n_words = xfer->len / qup->w_size; + + if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32))) + mode = QUP_IO_M_MODE_FIFO; + else + mode = QUP_IO_M_MODE_BLOCK; + + return mode; +} /* set clock freq ... bits per word */ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) { struct spi_qup *controller = spi_master_get_devdata(spi->master); u32 config, iomode, mode, control; - int ret, n_words, w_size; + int ret, n_words; if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) { dev_err(controller->dev, "too big size for loopback %d > %d\n", @@ -358,35 +491,54 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) return -EIO; } - w_size = 4; - if (xfer->bits_per_word <= 8) - w_size = 1; - else if (xfer->bits_per_word <= 16) - w_size = 2; - - n_words = xfer->len / w_size; - controller->w_size = w_size; + mode = spi_qup_get_mode(spi->master, xfer); + n_words = controller->n_words; - if (n_words <= (controller->in_fifo_sz / sizeof(u32))) { - mode = QUP_IO_M_MODE_FIFO; + if (mode == QUP_IO_M_MODE_FIFO) { writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT); writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT); /* must be zero for FIFO */ writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT); writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT); - } else { - mode = QUP_IO_M_MODE_BLOCK; + } else if (!controller->use_dma) { writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT); writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT); /* must be zero for BLOCK and BAM */ writel_relaxed(0, controller->base + QUP_MX_READ_CNT); writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); + } else { + mode = QUP_IO_M_MODE_BAM; + writel_relaxed(0, controller->base + QUP_MX_READ_CNT); + writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); + + if (!controller->qup_v1) { + void __iomem *input_cnt; + + input_cnt = controller->base + QUP_MX_INPUT_CNT; + /* + * for DMA transfers, both QUP_MX_INPUT_CNT and + * QUP_MX_OUTPUT_CNT must be zero to all cases but one. + * That case is a non-balanced transfer when there is + * only a rx_buf. + */ + if (xfer->tx_buf) + writel_relaxed(0, input_cnt); + else + writel_relaxed(n_words, input_cnt); + + writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT); + } } iomode = readl_relaxed(controller->base + QUP_IO_M_MODES); /* Set input and output transfer mode */ iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK); - iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN); + + if (!controller->use_dma) + iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN); + else + iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN; + iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT); iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT); @@ -428,11 +580,31 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N); config |= xfer->bits_per_word - 1; config |= QUP_CONFIG_SPI_MODE; + + if (controller->use_dma) { + if (!xfer->tx_buf) + config |= QUP_CONFIG_NO_OUTPUT; + if (!xfer->rx_buf) + config |= QUP_CONFIG_NO_INPUT; + } + writel_relaxed(config, controller->base + QUP_CONFIG); /* only write to OPERATIONAL_MASK when register is present */ - if (!controller->qup_v1) - writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK); + if (!controller->qup_v1) { + u32 mask = 0; + + /* + * mask INPUT and OUTPUT service flags to prevent IRQs on FIFO + * status change in BAM mode + */ + + if (mode == QUP_IO_M_MODE_BAM) + mask = QUP_OP_IN_SERVICE_FLAG | QUP_OP_OUT_SERVICE_FLAG; + + writel_relaxed(mask, controller->base + QUP_OPERATIONAL_MASK); + } + return 0; } @@ -461,17 +633,13 @@ static int spi_qup_transfer_one(struct spi_master *master, controller->tx_bytes = 0; spin_unlock_irqrestore(&controller->lock, flags); - if (spi_qup_set_state(controller, QUP_STATE_RUN)) { - dev_warn(controller->dev, "cannot set RUN state\n"); - goto exit; - } + if (controller->use_dma) + ret = spi_qup_do_dma(master, xfer); + else + ret = spi_qup_do_pio(master, xfer); - if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) { - dev_warn(controller->dev, "cannot set PAUSE state\n"); + if (ret) goto exit; - } - - spi_qup_fifo_write(controller, xfer); if (spi_qup_set_state(controller, QUP_STATE_RUN)) { dev_warn(controller->dev, "cannot set EXECUTE state\n"); @@ -480,6 +648,7 @@ static int spi_qup_transfer_one(struct spi_master *master, if (!wait_for_completion_timeout(&controller->done, timeout)) ret = -ETIMEDOUT; + exit: spi_qup_set_state(controller, QUP_STATE_RESET); spin_lock_irqsave(&controller->lock, flags); @@ -487,6 +656,97 @@ exit: if (!ret) ret = controller->error; spin_unlock_irqrestore(&controller->lock, flags); + + if (ret && controller->use_dma) + spi_qup_dma_terminate(master, xfer); + + return ret; +} + +static bool spi_qup_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct spi_qup *qup = spi_master_get_devdata(master); + size_t dma_align = dma_get_cache_alignment(); + u32 mode; + + qup->use_dma = 0; + + if (xfer->rx_buf && (xfer->len % qup->in_blk_sz || + IS_ERR_OR_NULL(master->dma_rx) || + !IS_ALIGNED((size_t)xfer->rx_buf, dma_align))) + return false; + + if (xfer->tx_buf && (xfer->len % qup->out_blk_sz || + IS_ERR_OR_NULL(master->dma_tx) || + !IS_ALIGNED((size_t)xfer->tx_buf, dma_align))) + return false; + + mode = spi_qup_get_mode(master, xfer); + if (mode == QUP_IO_M_MODE_FIFO) + return false; + + qup->use_dma = 1; + + return true; +} + +static void spi_qup_release_dma(struct spi_master *master) +{ + if (!IS_ERR_OR_NULL(master->dma_rx)) + dma_release_channel(master->dma_rx); + if (!IS_ERR_OR_NULL(master->dma_tx)) + dma_release_channel(master->dma_tx); +} + +static int spi_qup_init_dma(struct spi_master *master, resource_size_t base) +{ + struct spi_qup *spi = spi_master_get_devdata(master); + struct dma_slave_config *rx_conf = &spi->rx_conf, + *tx_conf = &spi->tx_conf; + struct device *dev = spi->dev; + int ret; + + /* allocate dma resources, if available */ + master->dma_rx = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(master->dma_rx)) + return PTR_ERR(master->dma_rx); + + master->dma_tx = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(master->dma_tx)) { + ret = PTR_ERR(master->dma_tx); + goto err_tx; + } + + /* set DMA parameters */ + rx_conf->direction = DMA_DEV_TO_MEM; + rx_conf->device_fc = 1; + rx_conf->src_addr = base + QUP_INPUT_FIFO; + rx_conf->src_maxburst = spi->in_blk_sz; + + tx_conf->direction = DMA_MEM_TO_DEV; + tx_conf->device_fc = 1; + tx_conf->dst_addr = base + QUP_OUTPUT_FIFO; + tx_conf->dst_maxburst = spi->out_blk_sz; + + ret = dmaengine_slave_config(master->dma_rx, rx_conf); + if (ret) { + dev_err(dev, "failed to configure RX channel\n"); + goto err; + } + + ret = dmaengine_slave_config(master->dma_tx, tx_conf); + if (ret) { + dev_err(dev, "failed to configure TX channel\n"); + goto err; + } + + return 0; + +err: + dma_release_channel(master->dma_tx); +err_tx: + dma_release_channel(master->dma_rx); return ret; } @@ -563,6 +823,8 @@ static int spi_qup_probe(struct platform_device *pdev) master->transfer_one = spi_qup_transfer_one; master->dev.of_node = pdev->dev.of_node; master->auto_runtime_pm = true; + master->dma_alignment = dma_get_cache_alignment(); + master->max_dma_len = SPI_MAX_DMA_XFER; platform_set_drvdata(pdev, master); @@ -574,6 +836,12 @@ static int spi_qup_probe(struct platform_device *pdev) controller->cclk = cclk; controller->irq = irq; + ret = spi_qup_init_dma(master, res->start); + if (ret == -EPROBE_DEFER) + goto error; + else if (!ret) + master->can_dma = spi_qup_can_dma; + /* set v1 flag if device is version 1 */ if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1")) controller->qup_v1 = 1; @@ -610,7 +878,7 @@ static int spi_qup_probe(struct platform_device *pdev) ret = spi_qup_set_state(controller, QUP_STATE_RESET); if (ret) { dev_err(dev, "cannot set RESET state\n"); - goto error; + goto error_dma; } writel_relaxed(0, base + QUP_OPERATIONAL); @@ -634,7 +902,7 @@ static int spi_qup_probe(struct platform_device *pdev) ret = devm_request_irq(dev, irq, spi_qup_qup_irq, IRQF_TRIGGER_HIGH, pdev->name, controller); if (ret) - goto error; + goto error_dma; pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); pm_runtime_use_autosuspend(dev); @@ -649,6 +917,8 @@ static int spi_qup_probe(struct platform_device *pdev) disable_pm: pm_runtime_disable(&pdev->dev); +error_dma: + spi_qup_release_dma(master); error: clk_disable_unprepare(cclk); clk_disable_unprepare(iclk); @@ -740,6 +1010,8 @@ static int spi_qup_remove(struct platform_device *pdev) if (ret) return ret; + spi_qup_release_dma(master); + clk_disable_unprepare(controller->cclk); clk_disable_unprepare(controller->iclk); diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 1a777dc261d6..68e7efeb9a27 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -179,6 +179,7 @@ struct rockchip_spi { u8 tmode; u8 bpw; u8 n_bytes; + u8 rsd_nsecs; unsigned len; u32 speed; @@ -302,8 +303,8 @@ static int rockchip_spi_prepare_message(struct spi_master *master, return 0; } -static int rockchip_spi_unprepare_message(struct spi_master *master, - struct spi_message *msg) +static void rockchip_spi_handle_err(struct spi_master *master, + struct spi_message *msg) { unsigned long flags; struct rockchip_spi *rs = spi_master_get_devdata(master); @@ -313,8 +314,8 @@ static int rockchip_spi_unprepare_message(struct spi_master *master, /* * For DMA mode, we need terminate DMA channel and flush * fifo for the next transfer if DMA thansfer timeout. - * unprepare_message() was called by core if transfer complete - * or timeout. Maybe it is reasonable for error handling here. + * handle_err() was called by core if transfer failed. + * Maybe it is reasonable for error handling here. */ if (rs->use_dma) { if (rs->state & RXBUSY) { @@ -327,6 +328,12 @@ static int rockchip_spi_unprepare_message(struct spi_master *master, } spin_unlock_irqrestore(&rs->lock, flags); +} + +static int rockchip_spi_unprepare_message(struct spi_master *master, + struct spi_message *msg) +{ + struct rockchip_spi *rs = spi_master_get_devdata(master); spi_enable_chip(rs, 0); @@ -493,6 +500,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs) { u32 div = 0; u32 dmacr = 0; + int rsd = 0; u32 cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); @@ -519,9 +527,23 @@ static void rockchip_spi_config(struct rockchip_spi *rs) } /* div doesn't support odd number */ - div = max_t(u32, rs->max_freq / rs->speed, 1); + div = DIV_ROUND_UP(rs->max_freq, rs->speed); div = (div + 1) & 0xfffe; + /* Rx sample delay is expressed in parent clock cycles (max 3) */ + rsd = DIV_ROUND_CLOSEST(rs->rsd_nsecs * (rs->max_freq >> 8), + 1000000000 >> 8); + if (!rsd && rs->rsd_nsecs) { + pr_warn_once("rockchip-spi: %u Hz are too slow to express %u ns delay\n", + rs->max_freq, rs->rsd_nsecs); + } else if (rsd > 3) { + rsd = 3; + pr_warn_once("rockchip-spi: %u Hz are too fast to express %u ns delay, clamping at %u ns\n", + rs->max_freq, rs->rsd_nsecs, + rsd * 1000000000U / rs->max_freq); + } + cr0 |= rsd << CR0_RSD_OFFSET; + writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0); writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1); @@ -614,6 +636,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) struct rockchip_spi *rs; struct spi_master *master; struct resource *mem; + u32 rsd_nsecs; master = spi_alloc_master(&pdev->dev, sizeof(struct rockchip_spi)); if (!master) @@ -665,6 +688,10 @@ static int rockchip_spi_probe(struct platform_device *pdev) rs->dev = &pdev->dev; rs->max_freq = clk_get_rate(rs->spiclk); + if (!of_property_read_u32(pdev->dev.of_node, "rx-sample-delay-ns", + &rsd_nsecs)) + rs->rsd_nsecs = rsd_nsecs; + rs->fifo_len = get_fifo_len(rs); if (!rs->fifo_len) { dev_err(&pdev->dev, "Failed to get fifo length\n"); @@ -688,6 +715,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) master->prepare_message = rockchip_spi_prepare_message; master->unprepare_message = rockchip_spi_unprepare_message; master->transfer_one = rockchip_spi_transfer_one; + master->handle_err = rockchip_spi_handle_err; rs->dma_tx.ch = dma_request_slave_channel(rs->dev, "tx"); if (!rs->dma_tx.ch) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 46ce47076e63..186924aa4740 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -177,6 +177,13 @@ #define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */ #define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */ #define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */ +/* QSPI on R-Car Gen2 */ +#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */ +#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */ +#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */ +#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */ + +#define QSPI_BUFFER_SIZE 32u struct rspi_data { void __iomem *addr; @@ -366,6 +373,52 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) return 0; } +static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg) +{ + u8 data; + + data = rspi_read8(rspi, reg); + data &= ~mask; + data |= (val & mask); + rspi_write8(rspi, data, reg); +} + +static int qspi_set_send_trigger(struct rspi_data *rspi, unsigned int len) +{ + unsigned int n; + + n = min(len, QSPI_BUFFER_SIZE); + + if (len >= QSPI_BUFFER_SIZE) { + /* sets triggering number to 32 bytes */ + qspi_update(rspi, SPBFCR_TXTRG_MASK, + SPBFCR_TXTRG_32B, QSPI_SPBFCR); + } else { + /* sets triggering number to 1 byte */ + qspi_update(rspi, SPBFCR_TXTRG_MASK, + SPBFCR_TXTRG_1B, QSPI_SPBFCR); + } + + return n; +} + +static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len) +{ + unsigned int n; + + n = min(len, QSPI_BUFFER_SIZE); + + if (len >= QSPI_BUFFER_SIZE) { + /* sets triggering number to 32 bytes */ + qspi_update(rspi, SPBFCR_RXTRG_MASK, + SPBFCR_RXTRG_32B, QSPI_SPBFCR); + } else { + /* sets triggering number to 1 byte */ + qspi_update(rspi, SPBFCR_RXTRG_MASK, + SPBFCR_RXTRG_1B, QSPI_SPBFCR); + } +} + #define set_config_register(spi, n) spi->ops->set_config_register(spi, n) static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable) @@ -609,19 +662,29 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi, return __rspi_can_dma(rspi, xfer); } -static int rspi_common_transfer(struct rspi_data *rspi, - struct spi_transfer *xfer) +static int rspi_dma_check_then_transfer(struct rspi_data *rspi, + struct spi_transfer *xfer) { - int ret; - if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) { /* rx_buf can be NULL on RSPI on SH in TX-only Mode */ - ret = rspi_dma_transfer(rspi, &xfer->tx_sg, + int ret = rspi_dma_transfer(rspi, &xfer->tx_sg, xfer->rx_buf ? &xfer->rx_sg : NULL); if (ret != -EAGAIN) - return ret; + return 0; } + return -EAGAIN; +} + +static int rspi_common_transfer(struct rspi_data *rspi, + struct spi_transfer *xfer) +{ + int ret; + + ret = rspi_dma_check_then_transfer(rspi, xfer); + if (ret != -EAGAIN) + return ret; + ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len); if (ret < 0) return ret; @@ -661,12 +724,59 @@ static int rspi_rz_transfer_one(struct spi_master *master, return rspi_common_transfer(rspi, xfer); } +static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx, + u8 *rx, unsigned int len) +{ + int i, n, ret; + int error; + + while (len > 0) { + n = qspi_set_send_trigger(rspi, len); + qspi_set_receive_trigger(rspi, len); + if (n == QSPI_BUFFER_SIZE) { + error = rspi_wait_for_tx_empty(rspi); + if (error < 0) { + dev_err(&rspi->master->dev, "transmit timeout\n"); + return error; + } + for (i = 0; i < n; i++) + rspi_write_data(rspi, *tx++); + + error = rspi_wait_for_rx_full(rspi); + if (error < 0) { + dev_err(&rspi->master->dev, "receive timeout\n"); + return error; + } + for (i = 0; i < n; i++) + *rx++ = rspi_read_data(rspi); + } else { + ret = rspi_pio_transfer(rspi, tx, rx, n); + if (ret < 0) + return ret; + } + len -= n; + } + + return 0; +} + static int qspi_transfer_out_in(struct rspi_data *rspi, struct spi_transfer *xfer) { + int ret; + qspi_receive_init(rspi); - return rspi_common_transfer(rspi, xfer); + ret = rspi_dma_check_then_transfer(rspi, xfer); + if (ret != -EAGAIN) + return ret; + + ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf, + xfer->rx_buf, xfer->len); + if (ret < 0) + return ret; + + return 0; } static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 9231c34b5a5c..b1c6731fbf27 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -324,7 +324,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) /* Acquire DMA channels */ sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter, - (void *)sdd->rx_dma.dmach, dev, "rx"); + (void *)(long)sdd->rx_dma.dmach, dev, "rx"); if (!sdd->rx_dma.ch) { dev_err(dev, "Failed to get RX DMA channel\n"); ret = -EBUSY; @@ -333,7 +333,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) spi->dma_rx = sdd->rx_dma.ch; sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter, - (void *)sdd->tx_dma.dmach, dev, "tx"); + (void *)(long)sdd->tx_dma.dmach, dev, "tx"); if (!sdd->tx_dma.ch) { dev_err(dev, "Failed to get TX DMA channel\n"); ret = -EBUSY; diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c index 5a56acf8a43e..36af4d48a700 100644 --- a/drivers/spi/spi-sc18is602.c +++ b/drivers/spi/spi-sc18is602.c @@ -286,7 +286,7 @@ static int sc18is602_probe(struct i2c_client *client, hw->freq = SC18IS602_CLOCK; break; } - master->bus_num = client->adapter->nr; + master->bus_num = np ? -1 : client->adapter->nr; master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; master->bits_per_word_mask = SPI_BPW_MASK(8); master->setup = sc18is602_setup; diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c index 2faeaa7b57a8..f17c0abe299f 100644 --- a/drivers/spi/spi-st-ssc4.c +++ b/drivers/spi/spi-st-ssc4.c @@ -482,7 +482,7 @@ static const struct dev_pm_ops spi_st_pm = { SET_RUNTIME_PM_OPS(spi_st_runtime_suspend, spi_st_runtime_resume, NULL) }; -static struct of_device_id stm_spi_match[] = { +static const struct of_device_id stm_spi_match[] = { { .compatible = "st,comms-ssc4-spi", }, {}, }; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 57a195041dc7..d5d7d2235163 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -16,7 +16,6 @@ */ #include <linux/kernel.h> -#include <linux/kmod.h> #include <linux/device.h> #include <linux/init.h> #include <linux/cache.h> @@ -129,125 +128,11 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } -#ifdef CONFIG_PM_SLEEP -static int spi_legacy_suspend(struct device *dev, pm_message_t message) -{ - int value = 0; - struct spi_driver *drv = to_spi_driver(dev->driver); - - /* suspend will stop irqs and dma; no more i/o */ - if (drv) { - if (drv->suspend) - value = drv->suspend(to_spi_device(dev), message); - else - dev_dbg(dev, "... can't suspend\n"); - } - return value; -} - -static int spi_legacy_resume(struct device *dev) -{ - int value = 0; - struct spi_driver *drv = to_spi_driver(dev->driver); - - /* resume may restart the i/o queue */ - if (drv) { - if (drv->resume) - value = drv->resume(to_spi_device(dev)); - else - dev_dbg(dev, "... can't resume\n"); - } - return value; -} - -static int spi_pm_suspend(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_suspend(dev); - else - return spi_legacy_suspend(dev, PMSG_SUSPEND); -} - -static int spi_pm_resume(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_resume(dev); - else - return spi_legacy_resume(dev); -} - -static int spi_pm_freeze(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_freeze(dev); - else - return spi_legacy_suspend(dev, PMSG_FREEZE); -} - -static int spi_pm_thaw(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_thaw(dev); - else - return spi_legacy_resume(dev); -} - -static int spi_pm_poweroff(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_poweroff(dev); - else - return spi_legacy_suspend(dev, PMSG_HIBERNATE); -} - -static int spi_pm_restore(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm) - return pm_generic_restore(dev); - else - return spi_legacy_resume(dev); -} -#else -#define spi_pm_suspend NULL -#define spi_pm_resume NULL -#define spi_pm_freeze NULL -#define spi_pm_thaw NULL -#define spi_pm_poweroff NULL -#define spi_pm_restore NULL -#endif - -static const struct dev_pm_ops spi_pm = { - .suspend = spi_pm_suspend, - .resume = spi_pm_resume, - .freeze = spi_pm_freeze, - .thaw = spi_pm_thaw, - .poweroff = spi_pm_poweroff, - .restore = spi_pm_restore, - SET_RUNTIME_PM_OPS( - pm_generic_runtime_suspend, - pm_generic_runtime_resume, - NULL - ) -}; - struct bus_type spi_bus_type = { .name = "spi", .dev_groups = spi_dev_groups, .match = spi_match_device, .uevent = spi_uevent, - .pm = &spi_pm, }; EXPORT_SYMBOL_GPL(spi_bus_type); @@ -851,6 +736,9 @@ out: if (msg->status == -EINPROGRESS) msg->status = ret; + if (msg->status && master->handle_err) + master->handle_err(master, msg); + spi_finalize_current_message(master); return ret; @@ -1360,7 +1248,6 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc) spi->dev.of_node = nc; /* Register the new device */ - request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias); rc = spi_add_device(spi); if (rc) { dev_err(&master->dev, "spi_device register error %s\n", @@ -1894,6 +1781,8 @@ int spi_setup(struct spi_device *spi) if (!spi->max_speed_hz) spi->max_speed_hz = spi->master->max_speed_hz; + spi_set_cs(spi, false); + if (spi->master->setup) status = spi->master->setup(spi); diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 4eb7a980e670..92c909eed6b5 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -223,7 +223,7 @@ static int spidev_message(struct spidev_data *spidev, struct spi_transfer *k_xfers; struct spi_transfer *k_tmp; struct spi_ioc_transfer *u_tmp; - unsigned n, total; + unsigned n, total, tx_total, rx_total; u8 *tx_buf, *rx_buf; int status = -EFAULT; @@ -239,33 +239,52 @@ static int spidev_message(struct spidev_data *spidev, tx_buf = spidev->tx_buffer; rx_buf = spidev->rx_buffer; total = 0; + tx_total = 0; + rx_total = 0; for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers; n; n--, k_tmp++, u_tmp++) { k_tmp->len = u_tmp->len; total += k_tmp->len; - if (total > bufsiz) { + /* Since the function returns the total length of transfers + * on success, restrict the total to positive int values to + * avoid the return value looking like an error. Also check + * each transfer length to avoid arithmetic overflow. + */ + if (total > INT_MAX || k_tmp->len > INT_MAX) { status = -EMSGSIZE; goto done; } if (u_tmp->rx_buf) { + /* this transfer needs space in RX bounce buffer */ + rx_total += k_tmp->len; + if (rx_total > bufsiz) { + status = -EMSGSIZE; + goto done; + } k_tmp->rx_buf = rx_buf; if (!access_ok(VERIFY_WRITE, (u8 __user *) (uintptr_t) u_tmp->rx_buf, u_tmp->len)) goto done; + rx_buf += k_tmp->len; } if (u_tmp->tx_buf) { + /* this transfer needs space in TX bounce buffer */ + tx_total += k_tmp->len; + if (tx_total > bufsiz) { + status = -EMSGSIZE; + goto done; + } k_tmp->tx_buf = tx_buf; if (copy_from_user(tx_buf, (const u8 __user *) (uintptr_t) u_tmp->tx_buf, u_tmp->len)) goto done; + tx_buf += k_tmp->len; } - tx_buf += k_tmp->len; - rx_buf += k_tmp->len; k_tmp->cs_change = !!u_tmp->cs_change; k_tmp->tx_nbits = u_tmp->tx_nbits; @@ -303,8 +322,8 @@ static int spidev_message(struct spidev_data *spidev, status = -EFAULT; goto done; } + rx_buf += u_tmp->len; } - rx_buf += u_tmp->len; } status = total; @@ -684,6 +703,14 @@ static const struct file_operations spidev_fops = { static struct class *spidev_class; +#ifdef CONFIG_OF +static const struct of_device_id spidev_dt_ids[] = { + { .compatible = "rohm,dh2228fv" }, + {}, +}; +MODULE_DEVICE_TABLE(of, spidev_dt_ids); +#endif + /*-------------------------------------------------------------------------*/ static int spidev_probe(struct spi_device *spi) @@ -692,6 +719,17 @@ static int spidev_probe(struct spi_device *spi) int status; unsigned long minor; + /* + * spidev should never be referenced in DT without a specific + * compatbile string, it is a Linux implementation thing + * rather than a description of the hardware. + */ + if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) { + dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n"); + WARN_ON(spi->dev.of_node && + !of_match_device(spidev_dt_ids, &spi->dev)); + } + /* Allocate driver data */ spidev = kzalloc(sizeof(*spidev), GFP_KERNEL); if (!spidev) @@ -758,13 +796,6 @@ static int spidev_remove(struct spi_device *spi) return 0; } -static const struct of_device_id spidev_dt_ids[] = { - { .compatible = "rohm,dh2228fv" }, - {}, -}; - -MODULE_DEVICE_TABLE(of, spidev_dt_ids); - static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h deleted file mode 100644 index 10496bd24c5c..000000000000 --- a/include/linux/intel_mid_dma.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * intel_mid_dma.h - Intel MID DMA Drivers - * - * Copyright (C) 2008-10 Intel Corp - * Author: Vinod Koul <vinod.koul@intel.com> - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * - */ -#ifndef __INTEL_MID_DMA_H__ -#define __INTEL_MID_DMA_H__ - -#include <linux/dmaengine.h> - -#define DMA_PREP_CIRCULAR_LIST (1 << 10) - -/*DMA mode configurations*/ -enum intel_mid_dma_mode { - LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/ - LNW_DMA_MEM_TO_PER, /*memory to periphral configuration*/ - LNW_DMA_MEM_TO_MEM, /*mem to mem confg (testing only)*/ -}; - -/*DMA handshaking*/ -enum intel_mid_dma_hs_mode { - LNW_DMA_HW_HS = 0, /*HW Handshaking only*/ - LNW_DMA_SW_HS = 1, /*SW Handshaking not recommended*/ -}; - -/*Burst size configuration*/ -enum intel_mid_dma_msize { - LNW_DMA_MSIZE_1 = 0x0, - LNW_DMA_MSIZE_4 = 0x1, - LNW_DMA_MSIZE_8 = 0x2, - LNW_DMA_MSIZE_16 = 0x3, - LNW_DMA_MSIZE_32 = 0x4, - LNW_DMA_MSIZE_64 = 0x5, -}; - -/** - * struct intel_mid_dma_slave - DMA slave structure - * - * @dirn: DMA trf direction - * @src_width: tx register width - * @dst_width: rx register width - * @hs_mode: HW/SW handshaking mode - * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem) - * @src_msize: Source DMA burst size - * @dst_msize: Dst DMA burst size - * @per_addr: Periphral address - * @device_instance: DMA peripheral device instance, we can have multiple - * peripheral device connected to single DMAC - */ -struct intel_mid_dma_slave { - enum intel_mid_dma_hs_mode hs_mode; /*handshaking*/ - enum intel_mid_dma_mode cfg_mode; /*mode configuration*/ - unsigned int device_instance; /*0, 1 for periphral instance*/ - struct dma_slave_config dma_slave; -}; - -#endif /*__INTEL_MID_DMA_H__*/ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 856d34dde79b..d673072346f2 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -162,8 +162,6 @@ struct spi_transfer; * @remove: Unbinds this driver from the spi device * @shutdown: Standard shutdown callback used during system state * transitions such as powerdown/halt and kexec - * @suspend: Standard suspend callback used during system state transitions - * @resume: Standard resume callback used during system state transitions * @driver: SPI device drivers should initialize the name and owner * field of this structure. * @@ -184,8 +182,6 @@ struct spi_driver { int (*probe)(struct spi_device *spi); int (*remove)(struct spi_device *spi); void (*shutdown)(struct spi_device *spi); - int (*suspend)(struct spi_device *spi, pm_message_t mesg); - int (*resume)(struct spi_device *spi); struct device_driver driver; }; @@ -294,6 +290,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * transfer_one_message are mutually exclusive; when both * are set, the generic subsystem does not call your * transfer_one callback. + * @handle_err: the subsystem calls the driver to handle an error that occurs + * in the generic implementation of transfer_one_message(). * @unprepare_message: undo any work done by prepare_message(). * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that @@ -448,6 +446,8 @@ struct spi_master { void (*set_cs)(struct spi_device *spi, bool enable); int (*transfer_one)(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer); + void (*handle_err)(struct spi_master *master, + struct spi_message *message); /* gpio chip select */ int *cs_gpios; |