aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/spi/pxa2xx4
-rw-r--r--arch/arm/mach-davinci/dm355.c7
-rw-r--r--arch/arm/mach-davinci/dm365.c6
-rw-r--r--arch/arm/mach-davinci/include/mach/spi.h52
-rw-r--r--arch/arm/mach-pxa/cm-x255.c2
-rw-r--r--arch/arm/mach-pxa/cm-x270.c2
-rw-r--r--arch/arm/mach-pxa/corgi.c2
-rw-r--r--arch/arm/mach-pxa/devices.c2
-rw-r--r--arch/arm/mach-pxa/em-x270.c2
-rw-r--r--arch/arm/mach-pxa/hx4700.c2
-rw-r--r--arch/arm/mach-pxa/icontrol.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa2xx_spi.h47
-rw-r--r--arch/arm/mach-pxa/littleton.c2
-rw-r--r--arch/arm/mach-pxa/lubbock.c2
-rw-r--r--arch/arm/mach-pxa/pcm027.c2
-rw-r--r--arch/arm/mach-pxa/poodle.c2
-rw-r--r--arch/arm/mach-pxa/spitz.c3
-rw-r--r--arch/arm/mach-pxa/stargate2.c2
-rw-r--r--arch/arm/mach-pxa/tosa.c2
-rw-r--r--arch/arm/mach-pxa/trizeps4.c1
-rw-r--r--arch/arm/mach-pxa/z2.c2
-rw-r--r--arch/arm/mach-pxa/zeus.c2
-rw-r--r--arch/arm/plat-pxa/ssp.c2
-rw-r--r--drivers/spi/Kconfig38
-rw-r--r--drivers/spi/Makefile6
-rw-r--r--drivers/spi/amba-pl022.c56
-rw-r--r--drivers/spi/davinci_spi.c1314
-rw-r--r--drivers/spi/dw_spi.c52
-rw-r--r--drivers/spi/dw_spi_mid.c223
-rw-r--r--drivers/spi/dw_spi_pci.c20
-rw-r--r--drivers/spi/mpc52xx_psc_spi.c35
-rw-r--r--drivers/spi/omap2_mcspi.c11
-rw-r--r--drivers/spi/pxa2xx_spi.c190
-rw-r--r--drivers/spi/pxa2xx_spi_pci.c201
-rw-r--r--drivers/spi/spi_imx.c32
-rw-r--r--drivers/spi/spi_nuc900.c2
-rw-r--r--drivers/spi/spi_topcliff_pch.c12
-rw-r--r--drivers/spi/xilinx_spi.c133
-rw-r--r--drivers/spi/xilinx_spi.h32
-rw-r--r--drivers/spi/xilinx_spi_of.c133
-rw-r--r--drivers/spi/xilinx_spi_pltfm.c102
-rw-r--r--include/linux/pxa2xx_ssp.h (renamed from arch/arm/plat-pxa/include/plat/ssp.h)39
-rw-r--r--include/linux/spi/dw_spi.h24
-rw-r--r--include/linux/spi/pxa2xx_spi.h152
-rw-r--r--sound/soc/pxa/pxa-ssp.c2
45 files changed, 1596 insertions, 1365 deletions
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 6bb916d57c95..68a4fe3818a1 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
-----------------------------------
Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
"platform device". The master configuration is passed to the driver via a table
-found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
+found in include/linux/spi/pxa2xx_spi.h:
struct pxa2xx_spi_master {
enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
Each slave device attached to the PXA must provide slave specific configuration
information via the structure "pxa2xx_spi_chip" found in
-"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver
+"include/linux/spi/pxa2xx_spi.h". The pxa2xx_spi master controller driver
will uses the configuration whenever the driver communicates with the slave
device. All fields are optional.
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 2652af124acd..a5f8a80c1f28 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -412,12 +412,7 @@ static struct resource dm355_spi0_resources[] = {
static struct davinci_spi_platform_data dm355_spi0_pdata = {
.version = SPI_VERSION_1,
.num_chipselect = 2,
- .clk_internal = 1,
- .cs_hold = 1,
- .intr_level = 0,
- .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
- .c2tdelay = 0,
- .t2cdelay = 0,
+ .cshold_bug = true,
};
static struct platform_device dm355_spi0_device = {
.name = "spi_davinci",
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c466d710d3c1..02d2cc380df7 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -625,12 +625,6 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
static struct davinci_spi_platform_data dm365_spi0_pdata = {
.version = SPI_VERSION_1,
.num_chipselect = 2,
- .clk_internal = 1,
- .cs_hold = 1,
- .intr_level = 0,
- .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
- .c2tdelay = 0,
- .t2cdelay = 0,
};
static struct resource dm365_spi0_resources[] = {
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
index 910efbf099c0..38f4da5ca135 100644
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ b/arch/arm/mach-davinci/include/mach/spi.h
@@ -19,26 +19,66 @@
#ifndef __ARCH_ARM_DAVINCI_SPI_H
#define __ARCH_ARM_DAVINCI_SPI_H
+#define SPI_INTERN_CS 0xFF
+
enum {
SPI_VERSION_1, /* For DM355/DM365/DM6467 */
SPI_VERSION_2, /* For DA8xx */
};
+/**
+ * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
+ *
+ * @version: version of the SPI IP. Different DaVinci devices have slightly
+ * varying versions of the same IP.
+ * @num_chipselect: number of chipselects supported by this SPI master
+ * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
+ * controller withn the SoC. Possible values are 0 and 1.
+ * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
+ * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
+ * to populate if all chip-selects are internal.
+ * @cshold_bug: set this to true if the SPI controller on your chip requires
+ * a write to CSHOLD bit in between transfers (like in DM355).
+ */
struct davinci_spi_platform_data {
u8 version;
u8 num_chipselect;
+ u8 intr_line;
+ u8 *chip_sel;
+ bool cshold_bug;
+};
+
+/**
+ * davinci_spi_config - Per-chip-select configuration for SPI slave devices
+ *
+ * @wdelay: amount of delay between transmissions. Measured in number of
+ * SPI module clocks.
+ * @odd_parity: polarity of parity flag at the end of transmit data stream.
+ * 0 - odd parity, 1 - even parity.
+ * @parity_enable: enable transmission of parity at end of each transmit
+ * data stream.
+ * @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
+ * @timer_disable: disable chip-select timers (setup and hold)
+ * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
+ * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
+ * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
+ * in number of SPI clocks.
+ * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
+ * number of SPI clocks.
+ */
+struct davinci_spi_config {
u8 wdelay;
u8 odd_parity;
u8 parity_enable;
- u8 wait_enable;
+#define SPI_IO_TYPE_INTR 0
+#define SPI_IO_TYPE_POLL 1
+#define SPI_IO_TYPE_DMA 2
+ u8 io_type;
u8 timer_disable;
- u8 clk_internal;
- u8 cs_hold;
- u8 intr_level;
- u8 poll_mode;
- u8 use_dma;
u8 c2tdelay;
u8 t2cdelay;
+ u8 t2edelay;
+ u8 c2edelay;
};
#endif /* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index f1a7703d771b..93f59f877fc6 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -17,13 +17,13 @@
#include <linux/mtd/nand-gpio.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/pxa25x.h>
-#include <mach/pxa2xx_spi.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index a9926bb75922..b88d601a8090 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -19,12 +19,12 @@
#include <video/mbxfb.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 9f3e5af0a0db..a5452a3a276d 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -28,6 +28,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <video/w100fb.h>
@@ -48,7 +49,6 @@
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 022c2fa4af04..4c766e3b4af3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -3,6 +3,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <asm/pmu.h>
#include <mach/udc.h>
@@ -12,7 +13,6 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/pxa27x_keypad.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 4cefd1d18afd..a78bb3097739 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -26,6 +26,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
#include <linux/spi/libertas_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
@@ -46,7 +47,6 @@
#include <plat/pxa27x_keypad.h>
#include <plat/i2c.h>
#include <mach/camera.h>
-#include <mach/pxa2xx_spi.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index cacb21b7014d..a908e0a5f396 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -33,6 +33,7 @@
#include <linux/regulator/max1586.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
@@ -43,7 +44,6 @@
#include <mach/hx4700.h>
#include <plat/i2c.h>
#include <mach/irda.h>
-#include <mach/pxa2xx_spi.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index ac6ee12e400e..6cedc81da3bc 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -24,7 +24,7 @@
#include <mach/mxm8x10.h>
#include <linux/spi/spi.h>
-#include <mach/pxa2xx_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/can/platform/mcp251x.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
deleted file mode 100644
index b87cecd9bbdc..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef PXA2XX_SPI_H_
-#define PXA2XX_SPI_H_
-
-#define PXA2XX_CS_ASSERT (0x01)
-#define PXA2XX_CS_DEASSERT (0x02)
-
-/* device.platform_data for SSP controller devices */
-struct pxa2xx_spi_master {
- u32 clock_enable;
- u16 num_chipselect;
- u8 enable_dma;
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct pxa2xx_spi_chip {
- u8 tx_threshold;
- u8 rx_threshold;
- u8 dma_burst_size;
- u32 timeout;
- u8 enable_loopback;
- int gpio_cs;
- void (*cs_control)(u32 command);
-};
-
-extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
-
-#endif /*PXA2XX_SPI_H_*/
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 719c260597e7..ccb7bfad17ca 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/smc91x.h>
#include <linux/i2c.h>
#include <linux/leds.h>
@@ -42,7 +43,6 @@
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
#include <plat/pxa27x_keypad.h>
#include <mach/littleton.h>
#include <plat/i2c.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d3375486c8cd..3072dbea5c1f 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -25,7 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <mach/pxa2xx_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <asm/setup.h>
#include <asm/memory.h>
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 8547c9abc40a..1fc8a66407ae 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -25,12 +25,12 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/max7301.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 8451790cb48d..4f0ff1ab623d 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <mach/hardware.h>
@@ -43,7 +44,6 @@
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
-#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 0499a69e7673..0bc938729c4c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -23,7 +23,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
-#include <linux/mtd/physmap.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <linux/regulator/machine.h>
@@ -42,7 +42,6 @@
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3498a1423943..9a14fdb83c82 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -46,11 +46,11 @@
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/udc.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/mfd/da903x.h>
#include <linux/sht15.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 57d61ee9b226..af152e70cfcf 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/pda_power.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
#include <asm/setup.h>
@@ -44,7 +45,6 @@
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/audio.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 43fc9ca14594..423261d63d07 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -40,7 +40,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 527c2a1ed310..a323e076129e 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -20,6 +20,7 @@
#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/libertas_spi.h>
#include <linux/spi/lms283gf05.h>
#include <linux/power_supply.h>
@@ -38,7 +39,6 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
-#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index c87f2b35ee05..bf034c7670dd 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -20,6 +20,7 @@
#include <linux/dm9000.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
@@ -41,7 +42,6 @@
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
-#include <mach/pxa2xx_spi.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pm.h>
#include <mach/audio.h>
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index c6357e554aba..58b79809d20c 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -28,11 +28,11 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <plat/ssp.h>
static DEFINE_MUTEX(ssp_lock);
static LIST_HEAD(ssp_list);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 78f9fd02c1b2..1906840c1113 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -111,11 +111,14 @@ config SPI_COLDFIRE_QSPI
will be called coldfire_qspi.
config SPI_DAVINCI
- tristate "SPI controller driver for DaVinci/DA8xx SoC's"
+ tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
depends on SPI_MASTER && ARCH_DAVINCI
select SPI_BITBANG
help
- SPI master controller for DaVinci and DA8xx SPI modules.
+ SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
+
+ This driver can also be built as a module. The module will be called
+ davinci_spi.
config SPI_EP93XX
tristate "Cirrus Logic EP93xx SPI controller"
@@ -267,12 +270,15 @@ config SPI_PPC4xx
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on ARCH_PXA && EXPERIMENTAL
- select PXA_SSP
+ depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
+ select PXA_SSP if ARCH_PXA
help
- This enables using a PXA2xx SSP port as a SPI master controller.
- The driver can be configured to use any SSP port and additional
- documentation can be found a Documentation/spi/pxa2xx.
+ This enables using a PXA2xx or Sodaville SSP port as a SPI master
+ controller. The driver can be configured to use any SSP port and
+ additional documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_PXA2XX_PCI
+ def_bool SPI_PXA2XX && X86_32 && PCI
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
@@ -353,7 +359,6 @@ config SPI_XILINX
tristate "Xilinx SPI controller common module"
depends on HAS_IOMEM && EXPERIMENTAL
select SPI_BITBANG
- select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
help
This exposes the SPI controller IP from the Xilinx EDK.
@@ -362,19 +367,6 @@ config SPI_XILINX
Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
-config SPI_XILINX_OF
- tristate "Xilinx SPI controller OF device"
- depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE)
- help
- This is the OF driver for the SPI controller IP from the Xilinx EDK.
-
-config SPI_XILINX_PLTFM
- tristate "Xilinx SPI controller platform device"
- depends on SPI_XILINX
- help
- This is the platform driver for the SPI controller IP
- from the Xilinx EDK.
-
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900 && EXPERIMENTAL
@@ -396,6 +388,10 @@ config SPI_DW_PCI
tristate "PCI interface driver for DW SPI core"
depends on SPI_DESIGNWARE && PCI
+config SPI_DW_MID_DMA
+ bool "DMA support for DW SPI controller on Intel Moorestown platform"
+ depends on SPI_DW_PCI && INTEL_MID_DMAC
+
config SPI_DW_MMIO
tristate "Memory-mapped io interface driver for DW SPI core"
depends on SPI_DESIGNWARE && HAVE_CLK
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8bc1a5abac1f..3a42463c92a4 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,13 +17,15 @@ obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o
obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o
obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o
-obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o
+obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o
+dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o
obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o
obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
+obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o
@@ -43,8 +45,6 @@ obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
-obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o
-obj-$(CONFIG_SPI_XILINX_PLTFM) += xilinx_spi_pltfm.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index fb3d1b31772d..a2a5921c730a 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -253,11 +253,6 @@
#define STATE_ERROR ((void *) -1)
/*
- * Queue State
- */
-#define QUEUE_RUNNING (0)
-#define QUEUE_STOPPED (1)
-/*
* SSP State - Whether Enabled or Disabled
*/
#define SSP_DISABLED (0)
@@ -344,7 +339,7 @@ struct vendor_data {
* @lock: spinlock to syncronise access to driver data
* @workqueue: a workqueue on which any spi_message request is queued
* @busy: workqueue is busy
- * @run: workqueue is running
+ * @running: workqueue is running
* @pump_transfers: Tasklet used in Interrupt Transfer mode
* @cur_msg: Pointer to current spi_message being processed
* @cur_transfer: Pointer to current spi_transfer
@@ -369,8 +364,8 @@ struct pl022 {
struct work_struct pump_messages;
spinlock_t queue_lock;
struct list_head queue;
- int busy;
- int run;
+ bool busy;
+ bool running;
/* Message transfer pump */
struct tasklet_struct pump_transfers;
struct spi_message *cur_msg;
@@ -782,9 +777,9 @@ static void *next_transfer(struct pl022 *pl022)
static void unmap_free_dma_scatter(struct pl022 *pl022)
{
/* Unmap and free the SG tables */
- dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
+ dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl,
pl022->sgt_tx.nents, DMA_TO_DEVICE);
- dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
+ dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl,
pl022->sgt_rx.nents, DMA_FROM_DEVICE);
sg_free_table(&pl022->sgt_rx);
sg_free_table(&pl022->sgt_tx);
@@ -917,7 +912,7 @@ static int configure_dma(struct pl022 *pl022)
};
unsigned int pages;
int ret;
- int sglen;
+ int rx_sglen, tx_sglen;
struct dma_chan *rxchan = pl022->dma_rx_channel;
struct dma_chan *txchan = pl022->dma_tx_channel;
struct dma_async_tx_descriptor *rxdesc;
@@ -956,7 +951,7 @@ static int configure_dma(struct pl022 *pl022)
tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
break;
case WRITING_U32:
- tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;;
+ tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
}
@@ -991,20 +986,20 @@ static int configure_dma(struct pl022 *pl022)
pl022->cur_transfer->len, &pl022->sgt_tx);
/* Map DMA buffers */
- sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
+ rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
pl022->sgt_rx.nents, DMA_FROM_DEVICE);
- if (!sglen)
+ if (!rx_sglen)
goto err_rx_sgmap;
- sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
+ tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl,
pl022->sgt_tx.nents, DMA_TO_DEVICE);
- if (!sglen)
+ if (!tx_sglen)
goto err_tx_sgmap;
/* Send both scatterlists */
rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
pl022->sgt_rx.sgl,
- pl022->sgt_rx.nents,
+ rx_sglen,
DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!rxdesc)
@@ -1012,7 +1007,7 @@ static int configure_dma(struct pl022 *pl022)
txdesc = txchan->device->device_prep_slave_sg(txchan,
pl022->sgt_tx.sgl,
- pl022->sgt_tx.nents,
+ tx_sglen,
DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc)
@@ -1040,10 +1035,10 @@ err_txdesc:
txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0);
err_rxdesc:
rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0);
- dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
+ dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl,
pl022->sgt_tx.nents, DMA_TO_DEVICE);
err_tx_sgmap:
- dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
+ dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
pl022->sgt_tx.nents, DMA_FROM_DEVICE);
err_rx_sgmap:
sg_free_table(&pl022->sgt_tx);
@@ -1460,8 +1455,8 @@ static void pump_messages(struct work_struct *work)
/* Lock queue and check for queue work */
spin_lock_irqsave(&pl022->queue_lock, flags);
- if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
- pl022->busy = 0;
+ if (list_empty(&pl022->queue) || !pl022->running) {
+ pl022->busy = false;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return;
}
@@ -1475,7 +1470,7 @@ static void pump_messages(struct work_struct *work)
list_entry(pl022->queue.next, struct spi_message, queue);
list_del_init(&pl022->cur_msg->queue);
- pl022->busy = 1;
+ pl022->busy = true;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
/* Initial message state */
@@ -1507,8 +1502,8 @@ static int __init init_queue(struct pl022 *pl022)
INIT_LIST_HEAD(&pl022->queue);
spin_lock_init(&pl022->queue_lock);
- pl022->run = QUEUE_STOPPED;
- pl022->busy = 0;
+ pl022->running = false;
+ pl022->busy = false;
tasklet_init(&pl022->pump_transfers,
pump_transfers, (unsigned long)pl022);
@@ -1529,12 +1524,12 @@ static int start_queue(struct pl022 *pl022)
spin_lock_irqsave(&pl022->queue_lock, flags);
- if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+ if (pl022->running || pl022->busy) {
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return -EBUSY;
}
- pl022->run = QUEUE_RUNNING;
+ pl022->running = true;
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
@@ -1566,7 +1561,8 @@ static int stop_queue(struct pl022 *pl022)
if (!list_empty(&pl022->queue) || pl022->busy)
status = -EBUSY;
- else pl022->run = QUEUE_STOPPED;
+ else
+ pl022->running = false;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
@@ -1684,7 +1680,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
spin_lock_irqsave(&pl022->queue_lock, flags);
- if (pl022->run == QUEUE_STOPPED) {
+ if (!pl022->running) {
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return -ESHUTDOWN;
}
@@ -1693,7 +1689,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
msg->state = STATE_START;
list_add_tail(&msg->queue, &pl022->queue);
- if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+ if (pl022->running && !pl022->busy)
queue_work(pl022->workqueue, &pl022->pump_messages);
spin_unlock_irqrestore(&pl022->queue_lock, flags);
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index b85090caf7cf..6beab99bf95b 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2009 Texas Instruments.
+ * Copyright (C) 2010 EF Johnson Technologies
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -38,11 +39,6 @@
#define CS_DEFAULT 0xFF
-#define SPI_BUFSIZ (SMP_CACHE_BYTES + 1)
-#define DAVINCI_DMA_DATA_TYPE_S8 0x01
-#define DAVINCI_DMA_DATA_TYPE_S16 0x02
-#define DAVINCI_DMA_DATA_TYPE_S32 0x04
-
#define SPIFMT_PHASE_MASK BIT(16)
#define SPIFMT_POLARITY_MASK BIT(17)
#define SPIFMT_DISTIMER_MASK BIT(18)
@@ -52,34 +48,43 @@
#define SPIFMT_ODD_PARITY_MASK BIT(23)
#define SPIFMT_WDELAY_MASK 0x3f000000u
#define SPIFMT_WDELAY_SHIFT 24
-#define SPIFMT_CHARLEN_MASK 0x0000001Fu
-
-/* SPIGCR1 */
-#define SPIGCR1_SPIENA_MASK 0x01000000u
+#define SPIFMT_PRESCALE_SHIFT 8
/* SPIPC0 */
#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */
#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
-#define SPIPC0_EN1FUN_MASK BIT(1)
-#define SPIPC0_EN0FUN_MASK BIT(0)
#define SPIINT_MASKALL 0x0101035F
-#define SPI_INTLVL_1 0x000001FFu
-#define SPI_INTLVL_0 0x00000000u
+#define SPIINT_MASKINT 0x0000015F
+#define SPI_INTLVL_1 0x000001FF
+#define SPI_INTLVL_0 0x00000000
-/* SPIDAT1 */
-#define SPIDAT1_CSHOLD_SHIFT 28
-#define SPIDAT1_CSNR_SHIFT 16
+/* SPIDAT1 (upper 16 bit defines) */
+#define SPIDAT1_CSHOLD_MASK BIT(12)
+
+/* SPIGCR1 */
#define SPIGCR1_CLKMOD_MASK BIT(1)
#define SPIGCR1_MASTER_MASK BIT(0)
+#define SPIGCR1_POWERDOWN_MASK BIT(8)
#define SPIGCR1_LOOPBACK_MASK BIT(16)
+#define SPIGCR1_SPIENA_MASK BIT(24)
/* SPIBUF */
#define SPIBUF_TXFULL_MASK BIT(29)
#define SPIBUF_RXEMPTY_MASK BIT(31)
+/* SPIDELAY */
+#define SPIDELAY_C2TDELAY_SHIFT 24
+#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT)
+#define SPIDELAY_T2CDELAY_SHIFT 16
+#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT)
+#define SPIDELAY_T2EDELAY_SHIFT 8
+#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT)
+#define SPIDELAY_C2EDELAY_SHIFT 0
+#define SPIDELAY_C2EDELAY_MASK 0xFF
+
/* Error Masks */
#define SPIFLG_DLEN_ERR_MASK BIT(0)
#define SPIFLG_TIMEOUT_MASK BIT(1)
@@ -87,29 +92,13 @@
#define SPIFLG_DESYNC_MASK BIT(3)
#define SPIFLG_BITERR_MASK BIT(4)
#define SPIFLG_OVRRUN_MASK BIT(6)
-#define SPIFLG_RX_INTR_MASK BIT(8)
-#define SPIFLG_TX_INTR_MASK BIT(9)
#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
-#define SPIFLG_MASK (SPIFLG_DLEN_ERR_MASK \
+#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \
| SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
| SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
- | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \
- | SPIFLG_TX_INTR_MASK \
- | SPIFLG_BUF_INIT_ACTIVE_MASK)
-
-#define SPIINT_DLEN_ERR_INTR BIT(0)
-#define SPIINT_TIMEOUT_INTR BIT(1)
-#define SPIINT_PARERR_INTR BIT(2)
-#define SPIINT_DESYNC_INTR BIT(3)
-#define SPIINT_BITERR_INTR BIT(4)
-#define SPIINT_OVRRUN_INTR BIT(6)
-#define SPIINT_RX_INTR BIT(8)
-#define SPIINT_TX_INTR BIT(9)
-#define SPIINT_DMA_REQ_EN BIT(16)
-#define SPIINT_ENABLE_HIGHZ BIT(24)
+ | SPIFLG_OVRRUN_MASK)
-#define SPI_T2CDELAY_SHIFT 16
-#define SPI_C2TDELAY_SHIFT 24
+#define SPIINT_DMA_REQ_EN BIT(16)
/* SPI Controller registers */
#define SPIGCR0 0x00
@@ -118,44 +107,18 @@
#define SPILVL 0x0c
#define SPIFLG 0x10
#define SPIPC0 0x14
-#define SPIPC1 0x18
-#define SPIPC2 0x1c
-#define SPIPC3 0x20
-#define SPIPC4 0x24
-#define SPIPC5 0x28
-#define SPIPC6 0x2c
-#define SPIPC7 0x30
-#define SPIPC8 0x34
-#define SPIDAT0 0x38
#define SPIDAT1 0x3c
#define SPIBUF 0x40
-#define SPIEMU 0x44
#define SPIDELAY 0x48
#define SPIDEF 0x4c
#define SPIFMT0 0x50
-#define SPIFMT1 0x54
-#define SPIFMT2 0x58
-#define SPIFMT3 0x5c
-#define TGINTVEC0 0x60
-#define TGINTVEC1 0x64
-
-struct davinci_spi_slave {
- u32 cmd_to_write;
- u32 clk_ctrl_to_write;
- u32 bytes_per_word;
- u8 active_cs;
-};
/* We have 2 DMA channels per CS, one for RX and one for TX */
struct davinci_spi_dma {
- int dma_tx_channel;
- int dma_rx_channel;
- int dma_tx_sync_dev;
- int dma_rx_sync_dev;
+ int tx_channel;
+ int rx_channel;
+ int dummy_param_slot;
enum dma_event_q eventq;
-
- struct completion dma_tx_completion;
- struct completion dma_rx_completion;
};
/* SPI Controller driver's private data. */
@@ -166,58 +129,63 @@ struct davinci_spi {
u8 version;
resource_size_t pbase;
void __iomem *base;
- size_t region_size;
u32 irq;
struct completion done;
const void *tx;
void *rx;
- u8 *tmp_buf;
- int count;
- struct davinci_spi_dma *dma_channels;
- struct davinci_spi_platform_data *pdata;
+#define SPI_TMP_BUFSZ (SMP_CACHE_BYTES + 1)
+ u8 rx_tmp_buf[SPI_TMP_BUFSZ];
+ int rcount;
+ int wcount;
+ struct davinci_spi_dma dma;
+ struct davinci_spi_platform_data *pdata;
void (*get_rx)(u32 rx_data, struct davinci_spi *);
u32 (*get_tx)(struct davinci_spi *);
- struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT];
+ u8 bytes_per_word[SPI_MAX_CHIPSELECT];
};
-static unsigned use_dma;
+static struct davinci_spi_config davinci_spi_default_cfg;
-static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi)
+static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi)
{
- u8 *rx = davinci_spi->rx;
-
- *rx++ = (u8)data;
- davinci_spi->rx = rx;
+ if (dspi->rx) {
+ u8 *rx = dspi->rx;
+ *rx++ = (u8)data;
+ dspi->rx = rx;
+ }
}
-static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi)
+static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi)
{
- u16 *rx = davinci_spi->rx;
-
- *rx++ = (u16)data;
- davinci_spi->rx = rx;
+ if (dspi->rx) {
+ u16 *rx = dspi->rx;
+ *rx++ = (u16)data;
+ dspi->rx = rx;
+ }
}
-static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi)
+static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi)
{
- u32 data;
- const u8 *tx = davinci_spi->tx;
-
- data = *tx++;
- davinci_spi->tx = tx;
+ u32 data = 0;
+ if (dspi->tx) {
+ const u8 *tx = dspi->tx;
+ data = *tx++;
+ dspi->tx = tx;
+ }
return data;
}
-static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi)
+static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi)
{
- u32 data;
- const u16 *tx = davinci_spi->tx;
-
- data = *tx++;
- davinci_spi->tx = tx;
+ u32 data = 0;
+ if (dspi->tx) {
+ const u16 *tx = dspi->tx;
+ data = *tx++;
+ dspi->tx = tx;
+ }
return data;
}
@@ -237,55 +205,67 @@ static inline void clear_io_bits(void __iomem *addr, u32 bits)
iowrite32(v, addr);
}
-static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
-{
- set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
-}
-
-static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
-{
- clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
-}
-
-static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable)
-{
- struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
-
- if (enable)
- set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
- else
- clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
-}
-
/*
* Interface to control the chip select signal
*/
static void davinci_spi_chipselect(struct spi_device *spi, int value)
{
- struct davinci_spi *davinci_spi;
+ struct davinci_spi *dspi;
struct davinci_spi_platform_data *pdata;
- u32 data1_reg_val = 0;
+ u8 chip_sel = spi->chip_select;
+ u16 spidat1 = CS_DEFAULT;
+ bool gpio_chipsel = false;
- davinci_spi = spi_master_get_devdata(spi->master);
- pdata = davinci_spi->pdata;
+ dspi = spi_master_get_devdata(spi->master);
+ pdata = dspi->pdata;
+
+ if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
+ pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
+ gpio_chipsel = true;
/*
* Board specific chip select logic decides the polarity and cs
* line for the controller
*/
- if (value == BITBANG_CS_INACTIVE) {
- set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
-
- data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT;
- iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+ if (gpio_chipsel) {
+ if (value == BITBANG_CS_ACTIVE)
+ gpio_set_value(pdata->chip_sel[chip_sel], 0);
+ else
+ gpio_set_value(pdata->chip_sel[chip_sel], 1);
+ } else {
+ if (value == BITBANG_CS_ACTIVE) {
+ spidat1 |= SPIDAT1_CSHOLD_MASK;
+ spidat1 &= ~(0x1 << chip_sel);
+ }
- while ((ioread32(davinci_spi->base + SPIBUF)
- & SPIBUF_RXEMPTY_MASK) == 0)
- cpu_relax();
+ iowrite16(spidat1, dspi->base + SPIDAT1 + 2);
}
}
/**
+ * davinci_spi_get_prescale - Calculates the correct prescale value
+ * @maxspeed_hz: the maximum rate the SPI clock can run at
+ *
+ * This function calculates the prescale value that generates a clock rate
+ * less than or equal to the specified maximum.
+ *
+ * Returns: calculated prescale - 1 for easy programming into SPI registers
+ * or negative error number if valid prescalar cannot be updated.
+ */
+static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
+ u32 max_speed_hz)
+{
+ int ret;
+
+ ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz);
+
+ if (ret < 3 || ret > 256)
+ return -EINVAL;
+
+ return ret - 1;
+}
+
+/**
* davinci_spi_setup_transfer - This functions will determine transfer method
* @spi: spi device on which data transfer to be done
* @t: spi transfer in which transfer info is filled
@@ -298,13 +278,15 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
- struct davinci_spi *davinci_spi;
- struct davinci_spi_platform_data *pdata;
+ struct davinci_spi *dspi;
+ struct davinci_spi_config *spicfg;
u8 bits_per_word = 0;
- u32 hz = 0, prescale = 0, clkspeed;
+ u32 hz = 0, spifmt = 0, prescale = 0;
- davinci_spi = spi_master_get_devdata(spi->master);
- pdata = davinci_spi->pdata;
+ dspi = spi_master_get_devdata(spi->master);
+ spicfg = (struct davinci_spi_config *)spi->controller_data;
+ if (!spicfg)
+ spicfg = &davinci_spi_default_cfg;
if (t) {
bits_per_word = t->bits_per_word;
@@ -320,111 +302,83 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
* 8bit, 16bit or 32bit transfer
*/
if (bits_per_word <= 8 && bits_per_word >= 2) {
- davinci_spi->get_rx = davinci_spi_rx_buf_u8;
- davinci_spi->get_tx = davinci_spi_tx_buf_u8;
- davinci_spi->slave[spi->chip_select].bytes_per_word = 1;
+ dspi->get_rx = davinci_spi_rx_buf_u8;
+ dspi->get_tx = davinci_spi_tx_buf_u8;
+ dspi->bytes_per_word[spi->chip_select] = 1;
} else if (bits_per_word <= 16 && bits_per_word >= 2) {
- davinci_spi->get_rx = davinci_spi_rx_buf_u16;
- davinci_spi->get_tx = davinci_spi_tx_buf_u16;
- davinci_spi->slave[spi->chip_select].bytes_per_word = 2;
+ dspi->get_rx = davinci_spi_rx_buf_u16;
+ dspi->get_tx = davinci_spi_tx_buf_u16;
+ dspi->bytes_per_word[spi->chip_select] = 2;
} else
return -EINVAL;
if (!hz)
hz = spi->max_speed_hz;
- clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK,
- spi->chip_select);
- set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f,
- spi->chip_select);
+ /* Set up SPIFMTn register, unique to this chipselect. */
- clkspeed = clk_get_rate(davinci_spi->clk);
- if (hz > clkspeed / 2)
- prescale = 1 << 8;
- if (hz < clkspeed / 256)
- prescale = 255 << 8;
- if (!prescale)
- prescale = ((clkspeed / hz - 1) << 8) & 0x0000ff00;
+ prescale = davinci_spi_get_prescale(dspi, hz);
+ if (prescale < 0)
+ return prescale;
- clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select);
- set_fmt_bits(davinci_spi->base, prescale, spi->chip_select);
+ spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
- return 0;
-}
+ if (spi->mode & SPI_LSB_FIRST)
+ spifmt |= SPIFMT_SHIFTDIR_MASK;
-static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data)
-{
- struct spi_device *spi = (struct spi_device *)data;
- struct davinci_spi *davinci_spi;
- struct davinci_spi_dma *davinci_spi_dma;
- struct davinci_spi_platform_data *pdata;
+ if (spi->mode & SPI_CPOL)
+ spifmt |= SPIFMT_POLARITY_MASK;
- davinci_spi = spi_master_get_devdata(spi->master);
- davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
- pdata = davinci_spi->pdata;
+ if (!(spi->mode & SPI_CPHA))
+ spifmt |= SPIFMT_PHASE_MASK;
- if (ch_status == DMA_COMPLETE)
- edma_stop(davinci_spi_dma->dma_rx_channel);
- else
- edma_clean_channel(davinci_spi_dma->dma_rx_channel);
+ /*
+ * Version 1 hardware supports two basic SPI modes:
+ * - Standard SPI mode uses 4 pins, with chipselect
+ * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+ * (distinct from SPI_3WIRE, with just one data wire;
+ * or similar variants without MOSI or without MISO)
+ *
+ * Version 2 hardware supports an optional handshaking signal,
+ * so it can support two more modes:
+ * - 5 pin SPI variant is standard SPI plus SPI_READY
+ * - 4 pin with enable is (SPI_READY | SPI_NO_CS)
+ */
- complete(&davinci_spi_dma->dma_rx_completion);
- /* We must disable the DMA RX request */
- davinci_spi_set_dma_req(spi, 0);
-}
+ if (dspi->version == SPI_VERSION_2) {
-static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data)
-{
- struct spi_device *spi = (struct spi_device *)data;
- struct davinci_spi *davinci_spi;
- struct davinci_spi_dma *davinci_spi_dma;
- struct davinci_spi_platform_data *pdata;
+ u32 delay = 0;
- davinci_spi = spi_master_get_devdata(spi->master);
- davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
- pdata = davinci_spi->pdata;
+ spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
+ & SPIFMT_WDELAY_MASK);
- if (ch_status == DMA_COMPLETE)
- edma_stop(davinci_spi_dma->dma_tx_channel);
- else
- edma_clean_channel(davinci_spi_dma->dma_tx_channel);
+ if (spicfg->odd_parity)
+ spifmt |= SPIFMT_ODD_PARITY_MASK;
- complete(&davinci_spi_dma->dma_tx_completion);
- /* We must disable the DMA TX request */
- davinci_spi_set_dma_req(spi, 0);
-}
+ if (spicfg->parity_enable)
+ spifmt |= SPIFMT_PARITYENA_MASK;
-static int davinci_spi_request_dma(struct spi_device *spi)
-{
- struct davinci_spi *davinci_spi;
- struct davinci_spi_dma *davinci_spi_dma;
- struct davinci_spi_platform_data *pdata;
- struct device *sdev;
- int r;
+ if (spicfg->timer_disable) {
+ spifmt |= SPIFMT_DISTIMER_MASK;
+ } else {
+ delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT)
+ & SPIDELAY_C2TDELAY_MASK;
+ delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT)
+ & SPIDELAY_T2CDELAY_MASK;
+ }
- davinci_spi = spi_master_get_devdata(spi->master);
- davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
- pdata = davinci_spi->pdata;
- sdev = davinci_spi->bitbang.master->dev.parent;
+ if (spi->mode & SPI_READY) {
+ spifmt |= SPIFMT_WAITENA_MASK;
+ delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT)
+ & SPIDELAY_T2EDELAY_MASK;
+ delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT)
+ & SPIDELAY_C2EDELAY_MASK;
+ }
- r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev,
- davinci_spi_dma_rx_callback, spi,
- davinci_spi_dma->eventq);
- if (r < 0) {
- dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n");
- return -EAGAIN;
+ iowrite32(delay, dspi->base + SPIDELAY);
}
- davinci_spi_dma->dma_rx_channel = r;
- r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev,
- davinci_spi_dma_tx_callback, spi,
- davinci_spi_dma->eventq);
- if (r < 0) {
- edma_free_channel(davinci_spi_dma->dma_rx_channel);
- davinci_spi_dma->dma_rx_channel = -1;
- dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n");
- return -EAGAIN;
- }
- davinci_spi_dma->dma_tx_channel = r;
+
+ iowrite32(spifmt, dspi->base + SPIFMT0);
return 0;
}
@@ -435,190 +389,40 @@ static int davinci_spi_request_dma(struct spi_device *spi)
*
* This functions sets the default transfer method.
*/
-
static int davinci_spi_setup(struct spi_device *spi)
{
- int retval;
- struct davinci_spi *davinci_spi;
- struct davinci_spi_dma *davinci_spi_dma;
- struct device *sdev;
+ int retval = 0;
+ struct davinci_spi *dspi;
+ struct davinci_spi_platform_data *pdata;
- davinci_spi = spi_master_get_devdata(spi->master);
- sdev = davinci_spi->bitbang.master->dev.parent;
+ dspi = spi_master_get_devdata(spi->master);
+ pdata = dspi->pdata;
/* if bits per word length is zero then set it default 8 */
if (!spi->bits_per_word)
spi->bits_per_word = 8;
- davinci_spi->slave[spi->chip_select].cmd_to_write = 0;
-
- if (use_dma && davinci_spi->dma_channels) {
- davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
- if ((davinci_spi_dma->dma_rx_channel == -1)
- || (davinci_spi_dma->dma_tx_channel == -1)) {
- retval = davinci_spi_request_dma(spi);
- if (retval < 0)
- return retval;
- }
- }
-
- /*
- * SPI in DaVinci and DA8xx operate between
- * 600 KHz and 50 MHz
- */
- if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) {
- dev_dbg(sdev, "Operating frequency is not in acceptable "
- "range\n");
- return -EINVAL;
- }
-
- /*
- * Set up SPIFMTn register, unique to this chipselect.
- *
- * NOTE: we could do all of these with one write. Also, some
- * of the "version 2" features are found in chips that don't
- * support all of them...
- */
- if (spi->mode & SPI_LSB_FIRST)
- set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
- spi->chip_select);
-
- if (spi->mode & SPI_CPOL)
- set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
- spi->chip_select);
+ if (!(spi->mode & SPI_NO_CS)) {
+ if ((pdata->chip_sel == NULL) ||
+ (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
+ set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
- if (!(spi->mode & SPI_CPHA))
- set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
- spi->chip_select);
-
- /*
- * Version 1 hardware supports two basic SPI modes:
- * - Standard SPI mode uses 4 pins, with chipselect
- * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
- * (distinct from SPI_3WIRE, with just one data wire;
- * or similar variants without MOSI or without MISO)
- *
- * Version 2 hardware supports an optional handshaking signal,
- * so it can support two more modes:
- * - 5 pin SPI variant is standard SPI plus SPI_READY
- * - 4 pin with enable is (SPI_READY | SPI_NO_CS)
- */
-
- if (davinci_spi->version == SPI_VERSION_2) {
- clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK,
- spi->chip_select);
- set_fmt_bits(davinci_spi->base,
- (davinci_spi->pdata->wdelay
- << SPIFMT_WDELAY_SHIFT)
- & SPIFMT_WDELAY_MASK,
- spi->chip_select);
-
- if (davinci_spi->pdata->odd_parity)
- set_fmt_bits(davinci_spi->base,
- SPIFMT_ODD_PARITY_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base,
- SPIFMT_ODD_PARITY_MASK,
- spi->chip_select);
-
- if (davinci_spi->pdata->parity_enable)
- set_fmt_bits(davinci_spi->base,
- SPIFMT_PARITYENA_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base,
- SPIFMT_PARITYENA_MASK,
- spi->chip_select);
-
- if (davinci_spi->pdata->wait_enable)
- set_fmt_bits(davinci_spi->base,
- SPIFMT_WAITENA_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base,
- SPIFMT_WAITENA_MASK,
- spi->chip_select);
-
- if (davinci_spi->pdata->timer_disable)
- set_fmt_bits(davinci_spi->base,
- SPIFMT_DISTIMER_MASK,
- spi->chip_select);
- else
- clear_fmt_bits(davinci_spi->base,
- SPIFMT_DISTIMER_MASK,
- spi->chip_select);
}
- retval = davinci_spi_setup_transfer(spi, NULL);
-
- return retval;
-}
-
-static void davinci_spi_cleanup(struct spi_device *spi)
-{
- struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
- struct davinci_spi_dma *davinci_spi_dma;
-
- davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
- if (use_dma && davinci_spi->dma_channels) {
- davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
- if ((davinci_spi_dma->dma_rx_channel != -1)
- && (davinci_spi_dma->dma_tx_channel != -1)) {
- edma_free_channel(davinci_spi_dma->dma_tx_channel);
- edma_free_channel(davinci_spi_dma->dma_rx_channel);
- }
- }
-}
-
-static int davinci_spi_bufs_prep(struct spi_device *spi,
- struct davinci_spi *davinci_spi)
-{
- int op_mode = 0;
-
- /*
- * REVISIT unless devices disagree about SPI_LOOP or
- * SPI_READY (SPI_NO_CS only allows one device!), this
- * should not need to be done before each message...
- * optimize for both flags staying cleared.
- */
-
- op_mode = SPIPC0_DIFUN_MASK
- | SPIPC0_DOFUN_MASK
- | SPIPC0_CLKFUN_MASK;
- if (!(spi->mode & SPI_NO_CS))
- op_mode |= 1 << spi->chip_select;
if (spi->mode & SPI_READY)
- op_mode |= SPIPC0_SPIENA_MASK;
-
- iowrite32(op_mode, davinci_spi->base + SPIPC0);
+ set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
if (spi->mode & SPI_LOOP)
- set_io_bits(davinci_spi->base + SPIGCR1,
- SPIGCR1_LOOPBACK_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
else
- clear_io_bits(davinci_spi->base + SPIGCR1,
- SPIGCR1_LOOPBACK_MASK);
+ clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
- return 0;
+ return retval;
}
-static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
- int int_status)
+static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
{
- struct device *sdev = davinci_spi->bitbang.master->dev.parent;
+ struct device *sdev = dspi->bitbang.master->dev.parent;
if (int_status & SPIFLG_TIMEOUT_MASK) {
dev_dbg(sdev, "SPI Time-out Error\n");
@@ -633,7 +437,7 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
return -EIO;
}
- if (davinci_spi->version == SPI_VERSION_2) {
+ if (dspi->version == SPI_VERSION_2) {
if (int_status & SPIFLG_DLEN_ERR_MASK) {
dev_dbg(sdev, "SPI Data Length Error\n");
return -EIO;
@@ -646,10 +450,6 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
dev_dbg(sdev, "SPI Data Overrun error\n");
return -EIO;
}
- if (int_status & SPIFLG_TX_INTR_MASK) {
- dev_dbg(sdev, "SPI TX intr bit set\n");
- return -EIO;
- }
if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
dev_dbg(sdev, "SPI Buffer Init Active\n");
return -EBUSY;
@@ -660,366 +460,339 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
}
/**
- * davinci_spi_bufs - functions which will handle transfer data
- * @spi: spi device on which data transfer to be done
- * @t: spi transfer in which transfer info is filled
+ * davinci_spi_process_events - check for and handle any SPI controller events
+ * @dspi: the controller data
*
- * This function will put data to be transferred into data register
- * of SPI controller and then wait until the completion will be marked
- * by the IRQ Handler.
+ * This function will check the SPIFLG register and handle any events that are
+ * detected there
*/
-static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
+static int davinci_spi_process_events(struct davinci_spi *dspi)
{
- struct davinci_spi *davinci_spi;
- int int_status, count, ret;
- u8 conv, tmp;
- u32 tx_data, data1_reg_val;
- u32 buf_val, flg_val;
- struct davinci_spi_platform_data *pdata;
-
- davinci_spi = spi_master_get_devdata(spi->master);
- pdata = davinci_spi->pdata;
-
- davinci_spi->tx = t->tx_buf;
- davinci_spi->rx = t->rx_buf;
-
- /* convert len to words based on bits_per_word */
- conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
- davinci_spi->count = t->len / conv;
-
- INIT_COMPLETION(davinci_spi->done);
-
- ret = davinci_spi_bufs_prep(spi, davinci_spi);
- if (ret)
- return ret;
-
- /* Enable SPI */
- set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
-
- iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
- (pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
- davinci_spi->base + SPIDELAY);
-
- count = davinci_spi->count;
- data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
- tmp = ~(0x1 << spi->chip_select);
-
- clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
-
- data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
+ u32 buf, status, errors = 0, spidat1;
- while ((ioread32(davinci_spi->base + SPIBUF)
- & SPIBUF_RXEMPTY_MASK) == 0)
- cpu_relax();
+ buf = ioread32(dspi->base + SPIBUF);
- /* Determine the command to execute READ or WRITE */
- if (t->tx_buf) {
- clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
+ if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) {
+ dspi->get_rx(buf & 0xFFFF, dspi);
+ dspi->rcount--;
+ }
- while (1) {
- tx_data = davinci_spi->get_tx(davinci_spi);
+ status = ioread32(dspi->base + SPIFLG);
- data1_reg_val &= ~(0xFFFF);
- data1_reg_val |= (0xFFFF & tx_data);
+ if (unlikely(status & SPIFLG_ERROR_MASK)) {
+ errors = status & SPIFLG_ERROR_MASK;
+ goto out;
+ }
- buf_val = ioread32(davinci_spi->base + SPIBUF);
- if ((buf_val & SPIBUF_TXFULL_MASK) == 0) {
- iowrite32(data1_reg_val,
- davinci_spi->base + SPIDAT1);
+ if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) {
+ spidat1 = ioread32(dspi->base + SPIDAT1);
+ dspi->wcount--;
+ spidat1 &= ~0xFFFF;
+ spidat1 |= 0xFFFF & dspi->get_tx(dspi);
+ iowrite32(spidat1, dspi->base + SPIDAT1);
+ }
- count--;
- }
- while (ioread32(davinci_spi->base + SPIBUF)
- & SPIBUF_RXEMPTY_MASK)
- cpu_relax();
-
- /* getting the returned byte */
- if (t->rx_buf) {
- buf_val = ioread32(davinci_spi->base + SPIBUF);
- davinci_spi->get_rx(buf_val, davinci_spi);
- }
- if (count <= 0)
- break;
- }
- } else {
- if (pdata->poll_mode) {
- while (1) {
- /* keeps the serial clock going */
- if ((ioread32(davinci_spi->base + SPIBUF)
- & SPIBUF_TXFULL_MASK) == 0)
- iowrite32(data1_reg_val,
- davinci_spi->base + SPIDAT1);
-
- while (ioread32(davinci_spi->base + SPIBUF) &
- SPIBUF_RXEMPTY_MASK)
- cpu_relax();
-
- flg_val = ioread32(davinci_spi->base + SPIFLG);
- buf_val = ioread32(davinci_spi->base + SPIBUF);
-
- davinci_spi->get_rx(buf_val, davinci_spi);
-
- count--;
- if (count <= 0)
- break;
- }
- } else { /* Receive in Interrupt mode */
- int i;
+out:
+ return errors;
+}
- for (i = 0; i < davinci_spi->count; i++) {
- set_io_bits(davinci_spi->base + SPIINT,
- SPIINT_BITERR_INTR
- | SPIINT_OVRRUN_INTR
- | SPIINT_RX_INTR);
+static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data)
+{
+ struct davinci_spi *dspi = data;
+ struct davinci_spi_dma *dma = &dspi->dma;
- iowrite32(data1_reg_val,
- davinci_spi->base + SPIDAT1);
+ edma_stop(lch);
- while (ioread32(davinci_spi->base + SPIINT) &
- SPIINT_RX_INTR)
- cpu_relax();
- }
- iowrite32((data1_reg_val & 0x0ffcffff),
- davinci_spi->base + SPIDAT1);
- }
+ if (status == DMA_COMPLETE) {
+ if (lch == dma->rx_channel)
+ dspi->rcount = 0;
+ if (lch == dma->tx_channel)
+ dspi->wcount = 0;
}
- /*
- * Check for bit error, desync error,parity error,timeout error and
- * receive overflow errors
- */
- int_status = ioread32(davinci_spi->base + SPIFLG);
-
- ret = davinci_spi_check_error(davinci_spi, int_status);
- if (ret != 0)
- return ret;
-
- /* SPI Framework maintains the count only in bytes so convert back */
- davinci_spi->count *= conv;
-
- return t->len;
+ if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE))
+ complete(&dspi->done);
}
-#define DAVINCI_DMA_DATA_TYPE_S8 0x01
-#define DAVINCI_DMA_DATA_TYPE_S16 0x02
-#define DAVINCI_DMA_DATA_TYPE_S32 0x04
-
-static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
+/**
+ * davinci_spi_bufs - functions which will handle transfer data
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function will put data to be transferred into data register
+ * of SPI controller and then wait until the completion will be marked
+ * by the IRQ Handler.
+ */
+static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
{
- struct davinci_spi *davinci_spi;
- int int_status = 0;
- int count, temp_count;
- u8 conv = 1;
- u8 tmp;
- u32 data1_reg_val;
- struct davinci_spi_dma *davinci_spi_dma;
- int word_len, data_type, ret;
- unsigned long tx_reg, rx_reg;
+ struct davinci_spi *dspi;
+ int data_type, ret;
+ u32 tx_data, spidat1;
+ u32 errors = 0;
+ struct davinci_spi_config *spicfg;
struct davinci_spi_platform_data *pdata;
+ unsigned uninitialized_var(rx_buf_count);
struct device *sdev;
- davinci_spi = spi_master_get_devdata(spi->master);
- pdata = davinci_spi->pdata;
- sdev = davinci_spi->bitbang.master->dev.parent;
-
- davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
- tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1;
- rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF;
-
- davinci_spi->tx = t->tx_buf;
- davinci_spi->rx = t->rx_buf;
+ dspi = spi_master_get_devdata(spi->master);
+ pdata = dspi->pdata;
+ spicfg = (struct davinci_spi_config *)spi->controller_data;
+ if (!spicfg)
+ spicfg = &davinci_spi_default_cfg;
+ sdev = dspi->bitbang.master->dev.parent;
/* convert len to words based on bits_per_word */
- conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
- davinci_spi->count = t->len / conv;
-
- INIT_COMPLETION(davinci_spi->done);
+ data_type = dspi->bytes_per_word[spi->chip_select];
- init_completion(&davinci_spi_dma->dma_rx_completion);
- init_completion(&davinci_spi_dma->dma_tx_completion);
+ dspi->tx = t->tx_buf;
+ dspi->rx = t->rx_buf;
+ dspi->wcount = t->len / data_type;
+ dspi->rcount = dspi->wcount;
- word_len = conv * 8;
-
- if (word_len <= 8)
- data_type = DAVINCI_DMA_DATA_TYPE_S8;
- else if (word_len <= 16)
- data_type = DAVINCI_DMA_DATA_TYPE_S16;
- else if (word_len <= 32)
- data_type = DAVINCI_DMA_DATA_TYPE_S32;
- else
- return -EINVAL;
-
- ret = davinci_spi_bufs_prep(spi, davinci_spi);
- if (ret)
- return ret;
+ spidat1 = ioread32(dspi->base + SPIDAT1);
- /* Put delay val if required */
- iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
- (pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
- davinci_spi->base + SPIDELAY);
+ clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
- count = davinci_spi->count; /* the number of elements */
- data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
+ INIT_COMPLETION(dspi->done);
- /* CS default = 0xFF */
- tmp = ~(0x1 << spi->chip_select);
+ if (spicfg->io_type == SPI_IO_TYPE_INTR)
+ set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
- clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
-
- data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
-
- /* disable all interrupts for dma transfers */
- clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
- /* Disable SPI to write configuration bits in SPIDAT */
- clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
- iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
- /* Enable SPI */
- set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
-
- while ((ioread32(davinci_spi->base + SPIBUF)
- & SPIBUF_RXEMPTY_MASK) == 0)
- cpu_relax();
-
-
- if (t->tx_buf) {
- t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&spi->dev, t->tx_dma)) {
- dev_dbg(sdev, "Unable to DMA map a %d bytes"
- " TX buffer\n", count);
- return -ENOMEM;
- }
- temp_count = count;
+ if (spicfg->io_type != SPI_IO_TYPE_DMA) {
+ /* start the transfer */
+ dspi->wcount--;
+ tx_data = dspi->get_tx(dspi);
+ spidat1 &= 0xFFFF0000;
+ spidat1 |= tx_data & 0xFFFF;
+ iowrite32(spidat1, dspi->base + SPIDAT1);
} else {
- /* We need TX clocking for RX transaction */
- t->tx_dma = dma_map_single(&spi->dev,
- (void *)davinci_spi->tmp_buf, count + 1,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&spi->dev, t->tx_dma)) {
- dev_dbg(sdev, "Unable to DMA map a %d bytes"
- " TX tmp buffer\n", count);
- return -ENOMEM;
+ struct davinci_spi_dma *dma;
+ unsigned long tx_reg, rx_reg;
+ struct edmacc_param param;
+ void *rx_buf;
+
+ dma = &dspi->dma;
+
+ tx_reg = (unsigned long)dspi->pbase + SPIDAT1;
+ rx_reg = (unsigned long)dspi->pbase + SPIBUF;
+
+ /*
+ * Transmit DMA setup
+ *
+ * If there is transmit data, map the transmit buffer, set it
+ * as the source of data and set the source B index to data
+ * size. If there is no transmit data, set the transmit register
+ * as the source of data, and set the source B index to zero.
+ *
+ * The destination is always the transmit register itself. And
+ * the destination never increments.
+ */
+
+ if (t->tx_buf) {
+ t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf,
+ dspi->wcount, DMA_TO_DEVICE);
+ if (dma_mapping_error(&spi->dev, t->tx_dma)) {
+ dev_dbg(sdev, "Unable to DMA map %d bytes"
+ "TX buffer\n", dspi->wcount);
+ return -ENOMEM;
+ }
}
- temp_count = count + 1;
- }
- edma_set_transfer_params(davinci_spi_dma->dma_tx_channel,
- data_type, temp_count, 1, 0, ASYNC);
- edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT);
- edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT);
- edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0);
- edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0);
-
- if (t->rx_buf) {
- /* initiate transaction */
- iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+ param.opt = TCINTEN | EDMA_TCC(dma->tx_channel);
+ param.src = t->tx_buf ? t->tx_dma : tx_reg;
+ param.a_b_cnt = dspi->wcount << 16 | data_type;
+ param.dst = tx_reg;
+ param.src_dst_bidx = t->tx_buf ? data_type : 0;
+ param.link_bcntrld = 0xffff;
+ param.src_dst_cidx = 0;
+ param.ccnt = 1;
+ edma_write_slot(dma->tx_channel, &param);
+ edma_link(dma->tx_channel, dma->dummy_param_slot);
+
+ /*
+ * Receive DMA setup
+ *
+ * If there is receive buffer, use it to receive data. If there
+ * is none provided, use a temporary receive buffer. Set the
+ * destination B index to 0 so effectively only one byte is used
+ * in the temporary buffer (address does not increment).
+ *
+ * The source of receive data is the receive data register. The
+ * source address never increments.
+ */
+
+ if (t->rx_buf) {
+ rx_buf = t->rx_buf;
+ rx_buf_count = dspi->rcount;
+ } else {
+ rx_buf = dspi->rx_tmp_buf;
+ rx_buf_count = sizeof(dspi->rx_tmp_buf);
+ }
- t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count,
- DMA_FROM_DEVICE);
+ t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count,
+ DMA_FROM_DEVICE);
if (dma_mapping_error(&spi->dev, t->rx_dma)) {
dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
- count);
- if (t->tx_buf != NULL)
- dma_unmap_single(NULL, t->tx_dma,
- count, DMA_TO_DEVICE);
+ rx_buf_count);
+ if (t->tx_buf)
+ dma_unmap_single(NULL, t->tx_dma, dspi->wcount,
+ DMA_TO_DEVICE);
return -ENOMEM;
}
- edma_set_transfer_params(davinci_spi_dma->dma_rx_channel,
- data_type, count, 1, 0, ASYNC);
- edma_set_src(davinci_spi_dma->dma_rx_channel,
- rx_reg, INCR, W8BIT);
- edma_set_dest(davinci_spi_dma->dma_rx_channel,
- t->rx_dma, INCR, W8BIT);
- edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0);
- edma_set_dest_index(davinci_spi_dma->dma_rx_channel,
- data_type, 0);
- }
- if ((t->tx_buf) || (t->rx_buf))
- edma_start(davinci_spi_dma->dma_tx_channel);
+ param.opt = TCINTEN | EDMA_TCC(dma->rx_channel);
+ param.src = rx_reg;
+ param.a_b_cnt = dspi->rcount << 16 | data_type;
+ param.dst = t->rx_dma;
+ param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16;
+ param.link_bcntrld = 0xffff;
+ param.src_dst_cidx = 0;
+ param.ccnt = 1;
+ edma_write_slot(dma->rx_channel, &param);
+
+ if (pdata->cshold_bug)
+ iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
+
+ edma_start(dma->rx_channel);
+ edma_start(dma->tx_channel);
+ set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+ }
- if (t->rx_buf)
- edma_start(davinci_spi_dma->dma_rx_channel);
+ /* Wait for the transfer to complete */
+ if (spicfg->io_type != SPI_IO_TYPE_POLL) {
+ wait_for_completion_interruptible(&(dspi->done));
+ } else {
+ while (dspi->rcount > 0 || dspi->wcount > 0) {
+ errors = davinci_spi_process_events(dspi);
+ if (errors)
+ break;
+ cpu_relax();
+ }
+ }
- if ((t->rx_buf) || (t->tx_buf))
- davinci_spi_set_dma_req(spi, 1);
+ clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
+ if (spicfg->io_type == SPI_IO_TYPE_DMA) {
- if (t->tx_buf)
- wait_for_completion_interruptible(
- &davinci_spi_dma->dma_tx_completion);
+ if (t->tx_buf)
+ dma_unmap_single(NULL, t->tx_dma, dspi->wcount,
+ DMA_TO_DEVICE);
- if (t->rx_buf)
- wait_for_completion_interruptible(
- &davinci_spi_dma->dma_rx_completion);
+ dma_unmap_single(NULL, t->rx_dma, rx_buf_count,
+ DMA_FROM_DEVICE);
- dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE);
+ clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+ }
- if (t->rx_buf)
- dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE);
+ clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
/*
* Check for bit error, desync error,parity error,timeout error and
* receive overflow errors
*/
- int_status = ioread32(davinci_spi->base + SPIFLG);
-
- ret = davinci_spi_check_error(davinci_spi, int_status);
- if (ret != 0)
+ if (errors) {
+ ret = davinci_spi_check_error(dspi, errors);
+ WARN(!ret, "%s: error reported but no error found!\n",
+ dev_name(&spi->dev));
return ret;
+ }
- /* SPI Framework maintains the count only in bytes so convert back */
- davinci_spi->count *= conv;
+ if (dspi->rcount != 0 || dspi->wcount != 0) {
+ dev_err(sdev, "SPI data transfer error\n");
+ return -EIO;
+ }
return t->len;
}
/**
- * davinci_spi_irq - IRQ handler for DaVinci SPI
+ * davinci_spi_irq - Interrupt handler for SPI Master Controller
* @irq: IRQ number for this SPI Master
* @context_data: structure for SPI Master controller davinci_spi
+ *
+ * ISR will determine that interrupt arrives either for READ or WRITE command.
+ * According to command it will do the appropriate action. It will check
+ * transfer length and if it is not zero then dispatch transfer command again.
+ * If transfer length is zero then it will indicate the COMPLETION so that
+ * davinci_spi_bufs function can go ahead.
*/
-static irqreturn_t davinci_spi_irq(s32 irq, void *context_data)
+static irqreturn_t davinci_spi_irq(s32 irq, void *data)
{
- struct davinci_spi *davinci_spi = context_data;
- u32 int_status, rx_data = 0;
- irqreturn_t ret = IRQ_NONE;
+ struct davinci_spi *dspi = data;
+ int status;
- int_status = ioread32(davinci_spi->base + SPIFLG);
+ status = davinci_spi_process_events(dspi);
+ if (unlikely(status != 0))
+ clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
- while ((int_status & SPIFLG_RX_INTR_MASK)) {
- if (likely(int_status & SPIFLG_RX_INTR_MASK)) {
- ret = IRQ_HANDLED;
+ if ((!dspi->rcount && !dspi->wcount) || status)
+ complete(&dspi->done);
- rx_data = ioread32(davinci_spi->base + SPIBUF);
- davinci_spi->get_rx(rx_data, davinci_spi);
+ return IRQ_HANDLED;
+}
- /* Disable Receive Interrupt */
- iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR),
- davinci_spi->base + SPIINT);
- } else
- (void)davinci_spi_check_error(davinci_spi, int_status);
+static int davinci_spi_request_dma(struct davinci_spi *dspi)
+{
+ int r;
+ struct davinci_spi_dma *dma = &dspi->dma;
- int_status = ioread32(davinci_spi->base + SPIFLG);
+ r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi,
+ dma->eventq);
+ if (r < 0) {
+ pr_err("Unable to request DMA channel for SPI RX\n");
+ r = -EAGAIN;
+ goto rx_dma_failed;
}
- return ret;
+ r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi,
+ dma->eventq);
+ if (r < 0) {
+ pr_err("Unable to request DMA channel for SPI TX\n");
+ r = -EAGAIN;
+ goto tx_dma_failed;
+ }
+
+ r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY);
+ if (r < 0) {
+ pr_err("Unable to request SPI TX DMA param slot\n");
+ r = -EAGAIN;
+ goto param_failed;
+ }
+ dma->dummy_param_slot = r;
+ edma_link(dma->dummy_param_slot, dma->dummy_param_slot);
+
+ return 0;
+param_failed:
+ edma_free_channel(dma->tx_channel);
+tx_dma_failed:
+ edma_free_channel(dma->rx_channel);
+rx_dma_failed:
+ return r;
}
/**
* davinci_spi_probe - probe function for SPI Master Controller
* @pdev: platform_device structure which contains plateform specific data
+ *
+ * According to Linux Device Model this function will be invoked by Linux
+ * with platform_device struct which contains the device specific info.
+ * This function will map the SPI controller's memory, register IRQ,
+ * Reset SPI controller and setting its registers to default value.
+ * It will invoke spi_bitbang_start to create work queue so that client driver
+ * can register transfer method to work queue.
*/
static int davinci_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
- struct davinci_spi *davinci_spi;
+ struct davinci_spi *dspi;
struct davinci_spi_platform_data *pdata;
struct resource *r, *mem;
resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
resource_size_t dma_tx_chan = SPI_NO_RESOURCE;
resource_size_t dma_eventq = SPI_NO_RESOURCE;
int i = 0, ret = 0;
+ u32 spipc0;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -1035,8 +808,8 @@ static int davinci_spi_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, master);
- davinci_spi = spi_master_get_devdata(master);
- if (davinci_spi == NULL) {
+ dspi = spi_master_get_devdata(master);
+ if (dspi == NULL) {
ret = -ENOENT;
goto free_master;
}
@@ -1047,164 +820,143 @@ static int davinci_spi_probe(struct platform_device *pdev)
goto free_master;
}
- davinci_spi->pbase = r->start;
- davinci_spi->region_size = resource_size(r);
- davinci_spi->pdata = pdata;
+ dspi->pbase = r->start;
+ dspi->pdata = pdata;
- mem = request_mem_region(r->start, davinci_spi->region_size,
- pdev->name);
+ mem = request_mem_region(r->start, resource_size(r), pdev->name);
if (mem == NULL) {
ret = -EBUSY;
goto free_master;
}
- davinci_spi->base = (struct davinci_spi_reg __iomem *)
- ioremap(r->start, davinci_spi->region_size);
- if (davinci_spi->base == NULL) {
+ dspi->base = ioremap(r->start, resource_size(r));
+ if (dspi->base == NULL) {
ret = -ENOMEM;
goto release_region;
}
- davinci_spi->irq = platform_get_irq(pdev, 0);
- if (davinci_spi->irq <= 0) {
+ dspi->irq = platform_get_irq(pdev, 0);
+ if (dspi->irq <= 0) {
ret = -EINVAL;
goto unmap_io;
}
- ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED,
- dev_name(&pdev->dev), davinci_spi);
+ ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev),
+ dspi);
if (ret)
goto unmap_io;
- /* Allocate tmp_buf for tx_buf */
- davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL);
- if (davinci_spi->tmp_buf == NULL) {
- ret = -ENOMEM;
- goto irq_free;
- }
-
- davinci_spi->bitbang.master = spi_master_get(master);
- if (davinci_spi->bitbang.master == NULL) {
+ dspi->bitbang.master = spi_master_get(master);
+ if (dspi->bitbang.master == NULL) {
ret = -ENODEV;
- goto free_tmp_buf;
+ goto irq_free;
}
- davinci_spi->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(davinci_spi->clk)) {
+ dspi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dspi->clk)) {
ret = -ENODEV;
goto put_master;
}
- clk_enable(davinci_spi->clk);
-
+ clk_enable(dspi->clk);
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->setup = davinci_spi_setup;
- master->cleanup = davinci_spi_cleanup;
-
- davinci_spi->bitbang.chipselect = davinci_spi_chipselect;
- davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer;
-
- davinci_spi->version = pdata->version;
- use_dma = pdata->use_dma;
-
- davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
- if (davinci_spi->version == SPI_VERSION_2)
- davinci_spi->bitbang.flags |= SPI_READY;
-
- if (use_dma) {
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (r)
- dma_rx_chan = r->start;
- r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (r)
- dma_tx_chan = r->start;
- r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
- if (r)
- dma_eventq = r->start;
- }
- if (!use_dma ||
- dma_rx_chan == SPI_NO_RESOURCE ||
- dma_tx_chan == SPI_NO_RESOURCE ||
- dma_eventq == SPI_NO_RESOURCE) {
- davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio;
- use_dma = 0;
- } else {
- davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma;
- davinci_spi->dma_channels = kzalloc(master->num_chipselect
- * sizeof(struct davinci_spi_dma), GFP_KERNEL);
- if (davinci_spi->dma_channels == NULL) {
- ret = -ENOMEM;
+ dspi->bitbang.chipselect = davinci_spi_chipselect;
+ dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
+
+ dspi->version = pdata->version;
+
+ dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
+ if (dspi->version == SPI_VERSION_2)
+ dspi->bitbang.flags |= SPI_READY;
+
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r)
+ dma_rx_chan = r->start;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r)
+ dma_tx_chan = r->start;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+ if (r)
+ dma_eventq = r->start;
+
+ dspi->bitbang.txrx_bufs = davinci_spi_bufs;
+ if (dma_rx_chan != SPI_NO_RESOURCE &&
+ dma_tx_chan != SPI_NO_RESOURCE &&
+ dma_eventq != SPI_NO_RESOURCE) {
+ dspi->dma.rx_channel = dma_rx_chan;
+ dspi->dma.tx_channel = dma_tx_chan;
+ dspi->dma.eventq = dma_eventq;
+
+ ret = davinci_spi_request_dma(dspi);
+ if (ret)
goto free_clk;
- }
- for (i = 0; i < master->num_chipselect; i++) {
- davinci_spi->dma_channels[i].dma_rx_channel = -1;
- davinci_spi->dma_channels[i].dma_rx_sync_dev =
- dma_rx_chan;
- davinci_spi->dma_channels[i].dma_tx_channel = -1;
- davinci_spi->dma_channels[i].dma_tx_sync_dev =
- dma_tx_chan;
- davinci_spi->dma_channels[i].eventq = dma_eventq;
- }
- dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n"
- "Using RX channel = %d , TX channel = %d and "
- "event queue = %d", dma_rx_chan, dma_tx_chan,
+ dev_info(&pdev->dev, "DMA: supported\n");
+ dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, "
+ "event queue: %d\n", dma_rx_chan, dma_tx_chan,
dma_eventq);
}
- davinci_spi->get_rx = davinci_spi_rx_buf_u8;
- davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+ dspi->get_rx = davinci_spi_rx_buf_u8;
+ dspi->get_tx = davinci_spi_tx_buf_u8;
- init_completion(&davinci_spi->done);
+ init_completion(&dspi->done);
/* Reset In/OUT SPI module */
- iowrite32(0, davinci_spi->base + SPIGCR0);
+ iowrite32(0, dspi->base + SPIGCR0);
udelay(100);
- iowrite32(1, davinci_spi->base + SPIGCR0);
+ iowrite32(1, dspi->base + SPIGCR0);
- /* Clock internal */
- if (davinci_spi->pdata->clk_internal)
- set_io_bits(davinci_spi->base + SPIGCR1,
- SPIGCR1_CLKMOD_MASK);
- else
- clear_io_bits(davinci_spi->base + SPIGCR1,
- SPIGCR1_CLKMOD_MASK);
+ /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */
+ spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
+ iowrite32(spipc0, dspi->base + SPIPC0);
- /* master mode default */
- set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+ /* initialize chip selects */
+ if (pdata->chip_sel) {
+ for (i = 0; i < pdata->num_chipselect; i++) {
+ if (pdata->chip_sel[i] != SPI_INTERN_CS)
+ gpio_direction_output(pdata->chip_sel[i], 1);
+ }
+ }
- if (davinci_spi->pdata->intr_level)
- iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL);
+ if (pdata->intr_line)
+ iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
else
- iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL);
+ iowrite32(SPI_INTLVL_0, dspi->base + SPILVL);
- ret = spi_bitbang_start(&davinci_spi->bitbang);
- if (ret)
- goto free_clk;
+ iowrite32(CS_DEFAULT, dspi->base + SPIDEF);
- dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base);
+ /* master mode default */
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+
+ ret = spi_bitbang_start(&dspi->bitbang);
+ if (ret)
+ goto free_dma;
- if (!pdata->poll_mode)
- dev_info(&pdev->dev, "Operating in interrupt mode"
- " using IRQ %d\n", davinci_spi->irq);
+ dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base);
return ret;
+free_dma:
+ edma_free_channel(dspi->dma.tx_channel);
+ edma_free_channel(dspi->dma.rx_channel);
+ edma_free_slot(dspi->dma.dummy_param_slot);
free_clk:
- clk_disable(davinci_spi->clk);
- clk_put(davinci_spi->clk);
+ clk_disable(dspi->clk);
+ clk_put(dspi->clk);
put_master:
spi_master_put(master);
-free_tmp_buf:
- kfree(davinci_spi->tmp_buf);
irq_free:
- free_irq(davinci_spi->irq, davinci_spi);
+ free_irq(dspi->irq, dspi);
unmap_io:
- iounmap(davinci_spi->base);
+ iounmap(dspi->base);
release_region:
- release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+ release_mem_region(dspi->pbase, resource_size(r));
free_master:
kfree(master);
err:
@@ -1222,27 +974,31 @@ err:
*/
static int __exit davinci_spi_remove(struct platform_device *pdev)
{
- struct davinci_spi *davinci_spi;
+ struct davinci_spi *dspi;
struct spi_master *master;
+ struct resource *r;
master = dev_get_drvdata(&pdev->dev);
- davinci_spi = spi_master_get_devdata(master);
+ dspi = spi_master_get_devdata(master);
- spi_bitbang_stop(&davinci_spi->bitbang);
+ spi_bitbang_stop(&dspi->bitbang);
- clk_disable(davinci_spi->clk);
- clk_put(davinci_spi->clk);
+ clk_disable(dspi->clk);
+ clk_put(dspi->clk);
spi_master_put(master);
- kfree(davinci_spi->tmp_buf);
- free_irq(davinci_spi->irq, davinci_spi);
- iounmap(davinci_spi->base);
- release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+ free_irq(dspi->irq, dspi);
+ iounmap(dspi->base);
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(dspi->pbase, resource_size(r));
return 0;
}
static struct platform_driver davinci_spi_driver = {
- .driver.name = "spi_davinci",
+ .driver = {
+ .name = "spi_davinci",
+ .owner = THIS_MODULE,
+ },
.remove = __exit_p(davinci_spi_remove),
};
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 0838c79861e4..22af77f98816 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -164,20 +164,23 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
static void wait_till_not_busy(struct dw_spi *dws)
{
- unsigned long end = jiffies + 1 + usecs_to_jiffies(1000);
+ unsigned long end = jiffies + 1 + usecs_to_jiffies(5000);
while (time_before(jiffies, end)) {
if (!(dw_readw(dws, sr) & SR_BUSY))
return;
+ cpu_relax();
}
dev_err(&dws->master->dev,
- "DW SPI: Status keeps busy for 1000us after a read/write!\n");
+ "DW SPI: Status keeps busy for 5000us after a read/write!\n");
}
static void flush(struct dw_spi *dws)
{
- while (dw_readw(dws, sr) & SR_RF_NOT_EMPT)
+ while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) {
dw_readw(dws, dr);
+ cpu_relax();
+ }
wait_till_not_busy(dws);
}
@@ -285,8 +288,10 @@ static void *next_transfer(struct dw_spi *dws)
*/
static int map_dma_buffers(struct dw_spi *dws)
{
- if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited
- || !dws->cur_chip->enable_dma)
+ if (!dws->cur_msg->is_dma_mapped
+ || !dws->dma_inited
+ || !dws->cur_chip->enable_dma
+ || !dws->dma_ops)
return 0;
if (dws->cur_transfer->tx_dma)
@@ -338,7 +343,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
tasklet_schedule(&dws->pump_transfers);
}
-static void transfer_complete(struct dw_spi *dws)
+void dw_spi_xfer_done(struct dw_spi *dws)
{
/* Update total byte transfered return count actual bytes read */
dws->cur_msg->actual_length += dws->len;
@@ -353,6 +358,7 @@ static void transfer_complete(struct dw_spi *dws)
} else
tasklet_schedule(&dws->pump_transfers);
}
+EXPORT_SYMBOL_GPL(dw_spi_xfer_done);
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
{
@@ -384,7 +390,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
if (dws->tx_end > dws->tx)
spi_umask_intr(dws, SPI_INT_TXEI);
else
- transfer_complete(dws);
+ dw_spi_xfer_done(dws);
}
return IRQ_HANDLED;
@@ -419,11 +425,7 @@ static void poll_transfer(struct dw_spi *dws)
*/
dws->read(dws);
- transfer_complete(dws);
-}
-
-static void dma_transfer(struct dw_spi *dws, int cs_change)
-{
+ dw_spi_xfer_done(dws);
}
static void pump_transfers(unsigned long data)
@@ -592,7 +594,7 @@ static void pump_transfers(unsigned long data)
spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
spi_chip_sel(dws, spi->chip_select);
- /* Set the interrupt mask, for poll mode just diable all int */
+ /* Set the interrupt mask, for poll mode just disable all int */
spi_mask_intr(dws, 0xff);
if (imask)
spi_umask_intr(dws, imask);
@@ -605,7 +607,7 @@ static void pump_transfers(unsigned long data)
}
if (dws->dma_mapped)
- dma_transfer(dws, cs_change);
+ dws->dma_ops->dma_transfer(dws, cs_change);
if (chip->poll_mode)
poll_transfer(dws);
@@ -901,11 +903,17 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
master->setup = dw_spi_setup;
master->transfer = dw_spi_transfer;
- dws->dma_inited = 0;
-
/* Basic HW init */
spi_hw_init(dws);
+ if (dws->dma_ops && dws->dma_ops->dma_init) {
+ ret = dws->dma_ops->dma_init(dws);
+ if (ret) {
+ dev_warn(&master->dev, "DMA init failed\n");
+ dws->dma_inited = 0;
+ }
+ }
+
/* Initial and start queue */
ret = init_queue(dws);
if (ret) {
@@ -930,6 +938,8 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
err_queue_alloc:
destroy_queue(dws);
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
err_diable_hw:
spi_enable_chip(dws, 0);
free_irq(dws->irq, dws);
@@ -938,7 +948,7 @@ err_free_master:
exit:
return ret;
}
-EXPORT_SYMBOL(dw_spi_add_host);
+EXPORT_SYMBOL_GPL(dw_spi_add_host);
void __devexit dw_spi_remove_host(struct dw_spi *dws)
{
@@ -954,6 +964,8 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
"complete, message memory not freed\n");
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
spi_enable_chip(dws, 0);
/* Disable clk */
spi_set_clk(dws, 0);
@@ -962,7 +974,7 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
/* Disconnect from the SPI framework */
spi_unregister_master(dws->master);
}
-EXPORT_SYMBOL(dw_spi_remove_host);
+EXPORT_SYMBOL_GPL(dw_spi_remove_host);
int dw_spi_suspend_host(struct dw_spi *dws)
{
@@ -975,7 +987,7 @@ int dw_spi_suspend_host(struct dw_spi *dws)
spi_set_clk(dws, 0);
return ret;
}
-EXPORT_SYMBOL(dw_spi_suspend_host);
+EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
int dw_spi_resume_host(struct dw_spi *dws)
{
@@ -987,7 +999,7 @@ int dw_spi_resume_host(struct dw_spi *dws)
dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
return ret;
}
-EXPORT_SYMBOL(dw_spi_resume_host);
+EXPORT_SYMBOL_GPL(dw_spi_resume_host);
MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
diff --git a/drivers/spi/dw_spi_mid.c b/drivers/spi/dw_spi_mid.c
new file mode 100644
index 000000000000..c91c966e0717
--- /dev/null
+++ b/drivers/spi/dw_spi_mid.c
@@ -0,0 +1,223 @@
+/*
+ * dw_spi_mid.c - special handling for DW core on Intel MID platform
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+#include <linux/intel_mid_dma.h>
+#include <linux/pci.h>
+
+struct mid_dma {
+ struct intel_mid_dma_slave dmas_tx;
+ struct intel_mid_dma_slave dmas_rx;
+};
+
+static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
+{
+ struct dw_spi *dws = param;
+
+ return dws->dmac && (&dws->dmac->dev == chan->device->dev);
+}
+
+static int mid_spi_dma_init(struct dw_spi *dws)
+{
+ struct mid_dma *dw_dma = dws->dma_priv;
+ struct intel_mid_dma_slave *rxs, *txs;
+ dma_cap_mask_t mask;
+
+ /*
+ * Get pci device for DMA controller, currently it could only
+ * be the DMA controller of either Moorestown or Medfield
+ */
+ dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL);
+ if (!dws->dmac)
+ dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL);
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* 1. Init rx channel */
+ dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+ if (!dws->rxchan)
+ goto err_exit;
+ rxs = &dw_dma->dmas_rx;
+ rxs->hs_mode = LNW_DMA_HW_HS;
+ rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
+ dws->rxchan->private = rxs;
+
+ /* 2. Init tx channel */
+ dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+ if (!dws->txchan)
+ goto free_rxchan;
+ txs = &dw_dma->dmas_tx;
+ txs->hs_mode = LNW_DMA_HW_HS;
+ txs->cfg_mode = LNW_DMA_MEM_TO_PER;
+ dws->txchan->private = txs;
+
+ dws->dma_inited = 1;
+ return 0;
+
+free_rxchan:
+ dma_release_channel(dws->rxchan);
+err_exit:
+ return -1;
+
+}
+
+static void mid_spi_dma_exit(struct dw_spi *dws)
+{
+ dma_release_channel(dws->txchan);
+ dma_release_channel(dws->rxchan);
+}
+
+/*
+ * dws->dma_chan_done is cleared before the dma transfer starts,
+ * callback for rx/tx channel will each increment it by 1.
+ * Reaching 2 means the whole spi transaction is done.
+ */
+static void dw_spi_dma_done(void *arg)
+{
+ struct dw_spi *dws = arg;
+
+ if (++dws->dma_chan_done != 2)
+ return;
+ dw_spi_xfer_done(dws);
+}
+
+static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+{
+ struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
+ struct dma_chan *txchan, *rxchan;
+ struct dma_slave_config txconf, rxconf;
+ u16 dma_ctrl = 0;
+
+ /* 1. setup DMA related registers */
+ if (cs_change) {
+ spi_enable_chip(dws, 0);
+ dw_writew(dws, dmardlr, 0xf);
+ dw_writew(dws, dmatdlr, 0x10);
+ if (dws->tx_dma)
+ dma_ctrl |= 0x2;
+ if (dws->rx_dma)
+ dma_ctrl |= 0x1;
+ dw_writew(dws, dmacr, dma_ctrl);
+ spi_enable_chip(dws, 1);
+ }
+
+ dws->dma_chan_done = 0;
+ txchan = dws->txchan;
+ rxchan = dws->rxchan;
+
+ /* 2. Prepare the TX dma transfer */
+ txconf.direction = DMA_TO_DEVICE;
+ txconf.dst_addr = dws->dma_addr;
+ txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+ txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
+ (unsigned long) &txconf);
+
+ memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
+ dws->tx_sgl.dma_address = dws->tx_dma;
+ dws->tx_sgl.length = dws->len;
+
+ txdesc = txchan->device->device_prep_slave_sg(txchan,
+ &dws->tx_sgl,
+ 1,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+ txdesc->callback = dw_spi_dma_done;
+ txdesc->callback_param = dws;
+
+ /* 3. Prepare the RX dma transfer */
+ rxconf.direction = DMA_FROM_DEVICE;
+ rxconf.src_addr = dws->dma_addr;
+ rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+ rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
+ (unsigned long) &rxconf);
+
+ memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
+ dws->rx_sgl.dma_address = dws->rx_dma;
+ dws->rx_sgl.length = dws->len;
+
+ rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
+ &dws->rx_sgl,
+ 1,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+ rxdesc->callback = dw_spi_dma_done;
+ rxdesc->callback_param = dws;
+
+ /* rx must be started before tx due to spi instinct */
+ rxdesc->tx_submit(rxdesc);
+ txdesc->tx_submit(txdesc);
+ return 0;
+}
+
+static struct dw_spi_dma_ops mid_dma_ops = {
+ .dma_init = mid_spi_dma_init,
+ .dma_exit = mid_spi_dma_exit,
+ .dma_transfer = mid_spi_dma_transfer,
+};
+#endif
+
+/* Some specific info for SPI0 controller on Moorestown */
+
+/* HW info for MRST CLk Control Unit, one 32b reg */
+#define MRST_SPI_CLK_BASE 100000000 /* 100m */
+#define MRST_CLK_SPI0_REG 0xff11d86c
+#define CLK_SPI_BDIV_OFFSET 0
+#define CLK_SPI_BDIV_MASK 0x00000007
+#define CLK_SPI_CDIV_OFFSET 9
+#define CLK_SPI_CDIV_MASK 0x00000e00
+#define CLK_SPI_DISABLE_OFFSET 8
+
+int dw_spi_mid_init(struct dw_spi *dws)
+{
+ u32 *clk_reg, clk_cdiv;
+
+ clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
+ if (!clk_reg)
+ return -ENOMEM;
+
+ /* get SPI controller operating freq info */
+ clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET;
+ dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
+ iounmap(clk_reg);
+
+ dws->num_cs = 16;
+ dws->fifo_len = 40; /* FIFO has 40 words buffer */
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+ dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
+ if (!dws->dma_priv)
+ return -ENOMEM;
+ dws->dma_ops = &mid_dma_ops;
+#endif
+ return 0;
+}
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
index 1f52755dc878..49ec3aa1219f 100644
--- a/drivers/spi/dw_spi_pci.c
+++ b/drivers/spi/dw_spi_pci.c
@@ -1,5 +1,5 @@
/*
- * mrst_spi_pci.c - PCI interface driver for DW SPI Core
+ * dw_spi_pci.c - PCI interface driver for DW SPI Core
*
* Copyright (c) 2009, Intel Corporation.
*
@@ -26,8 +26,8 @@
#define DRIVER_NAME "dw_spi_pci"
struct dw_spi_pci {
- struct pci_dev *pdev;
- struct dw_spi dws;
+ struct pci_dev *pdev;
+ struct dw_spi dws;
};
static int __devinit spi_pci_probe(struct pci_dev *pdev,
@@ -72,9 +72,17 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev,
dws->parent_dev = &pdev->dev;
dws->bus_num = 0;
dws->num_cs = 4;
- dws->max_freq = 25000000; /* for Moorestwon */
dws->irq = pdev->irq;
- dws->fifo_len = 40; /* FIFO has 40 words buffer */
+
+ /*
+ * Specific handling for Intel MID paltforms, like dma setup,
+ * clock rate, FIFO depth.
+ */
+ if (pdev->device == 0x0800) {
+ ret = dw_spi_mid_init(dws);
+ if (ret)
+ goto err_unmap;
+ }
ret = dw_spi_add_host(dws);
if (ret)
@@ -140,7 +148,7 @@ static int spi_resume(struct pci_dev *pdev)
#endif
static const struct pci_device_id pci_ids[] __devinitdata = {
- /* Intel Moorestown platform SPI controller 0 */
+ /* Intel MID platform SPI controller 0 */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) },
{},
};
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 983fbbfce76e..8a904c1c8485 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -363,7 +363,7 @@ static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
}
/* bus_num is used only for the case dev->platform_data == NULL */
-static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
+static int __devinit mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
u32 size, unsigned int irq, s16 bus_num)
{
struct fsl_spi_platform_data *pdata = dev->platform_data;
@@ -450,22 +450,7 @@ free_master:
return ret;
}
-static int __exit mpc52xx_psc_spi_do_remove(struct device *dev)
-{
- struct spi_master *master = dev_get_drvdata(dev);
- struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
-
- flush_workqueue(mps->workqueue);
- destroy_workqueue(mps->workqueue);
- spi_unregister_master(master);
- free_irq(mps->irq, mps);
- if (mps->psc)
- iounmap(mps->psc);
-
- return 0;
-}
-
-static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
+static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
const u32 *regaddr_p;
@@ -495,9 +480,19 @@ static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
irq_of_parse_and_map(op->dev.of_node, 0), id);
}
-static int __exit mpc52xx_psc_spi_of_remove(struct platform_device *op)
+static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op)
{
- return mpc52xx_psc_spi_do_remove(&op->dev);
+ struct spi_master *master = dev_get_drvdata(&op->dev);
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
+
+ flush_workqueue(mps->workqueue);
+ destroy_workqueue(mps->workqueue);
+ spi_unregister_master(master);
+ free_irq(mps->irq, mps);
+ if (mps->psc)
+ iounmap(mps->psc);
+
+ return 0;
}
static const struct of_device_id mpc52xx_psc_spi_of_match[] = {
@@ -510,7 +505,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match);
static struct of_platform_driver mpc52xx_psc_spi_of_driver = {
.probe = mpc52xx_psc_spi_of_probe,
- .remove = __exit_p(mpc52xx_psc_spi_of_remove),
+ .remove = __devexit_p(mpc52xx_psc_spi_of_remove),
.driver = {
.name = "mpc52xx-psc-spi",
.owner = THIS_MODULE,
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 951a160fc27f..abb1ffbf3d20 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -397,7 +397,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (tx != NULL) {
wait_for_completion(&mcspi_dma->dma_tx_completion);
- dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE);
+ dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE);
/* for TX_ONLY mode, be sure all words have shifted out */
if (rx == NULL) {
@@ -412,7 +412,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (rx != NULL) {
wait_for_completion(&mcspi_dma->dma_rx_completion);
- dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+ dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE);
omap2_mcspi_set_enable(spi, 0);
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
@@ -1025,11 +1025,6 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
if (m->is_dma_mapped || len < DMA_MIN_BYTES)
continue;
- /* Do DMA mapping "early" for better error reporting and
- * dcache use. Note that if dma_unmap_single() ever starts
- * to do real work on ARM, we'd need to clean up mappings
- * for previous transfers on *ALL* exits of this loop...
- */
if (tx_buf != NULL) {
t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf,
len, DMA_TO_DEVICE);
@@ -1046,7 +1041,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
'R', len);
if (tx_buf != NULL)
- dma_unmap_single(NULL, t->tx_dma,
+ dma_unmap_single(&spi->dev, t->tx_dma,
len, DMA_TO_DEVICE);
return -EINVAL;
}
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index e76b1afafe07..95928833855b 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -23,11 +23,11 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
-#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/slab.h>
@@ -35,9 +35,6 @@
#include <asm/irq.h>
#include <asm/delay.h>
-#include <mach/dma.h>
-#include <plat/ssp.h>
-#include <mach/pxa2xx_spi.h>
MODULE_AUTHOR("Stephen Street");
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
@@ -46,8 +43,6 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define MAX_BUSES 3
-#define RX_THRESH_DFLT 8
-#define TX_THRESH_DFLT 8
#define TIMOUT_DFLT 1000
#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
@@ -168,7 +163,10 @@ struct chip_data {
u8 enable_dma;
u8 bits_per_word;
u32 speed_hz;
- int gpio_cs;
+ union {
+ int gpio_cs;
+ unsigned int frm;
+ };
int gpio_cs_inverted;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
@@ -181,6 +179,11 @@ static void cs_assert(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
+ if (drv_data->ssp_type == CE4100_SSP) {
+ write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr);
+ return;
+ }
+
if (chip->cs_control) {
chip->cs_control(PXA2XX_CS_ASSERT);
return;
@@ -194,6 +197,9 @@ static void cs_deassert(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
+ if (drv_data->ssp_type == CE4100_SSP)
+ return;
+
if (chip->cs_control) {
chip->cs_control(PXA2XX_CS_DEASSERT);
return;
@@ -203,6 +209,25 @@ static void cs_deassert(struct driver_data *drv_data)
gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted);
}
+static void write_SSSR_CS(struct driver_data *drv_data, u32 val)
+{
+ void __iomem *reg = drv_data->ioaddr;
+
+ if (drv_data->ssp_type == CE4100_SSP)
+ val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK;
+
+ write_SSSR(val, reg);
+}
+
+static int pxa25x_ssp_comp(struct driver_data *drv_data)
+{
+ if (drv_data->ssp_type == PXA25x_SSP)
+ return 1;
+ if (drv_data->ssp_type == CE4100_SSP)
+ return 1;
+ return 0;
+}
+
static int flush(struct driver_data *drv_data)
{
unsigned long limit = loops_per_jiffy << 1;
@@ -214,7 +239,7 @@ static int flush(struct driver_data *drv_data)
read_SSDR(reg);
}
} while ((read_SSSR(reg) & SSSR_BSY) && --limit);
- write_SSSR(SSSR_ROR, reg);
+ write_SSSR_CS(drv_data, SSSR_ROR);
return limit;
}
@@ -224,7 +249,7 @@ static int null_writer(struct driver_data *drv_data)
void __iomem *reg = drv_data->ioaddr;
u8 n_bytes = drv_data->n_bytes;
- if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
|| (drv_data->tx == drv_data->tx_end))
return 0;
@@ -252,7 +277,7 @@ static int u8_writer(struct driver_data *drv_data)
{
void __iomem *reg = drv_data->ioaddr;
- if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
|| (drv_data->tx == drv_data->tx_end))
return 0;
@@ -279,7 +304,7 @@ static int u16_writer(struct driver_data *drv_data)
{
void __iomem *reg = drv_data->ioaddr;
- if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
|| (drv_data->tx == drv_data->tx_end))
return 0;
@@ -306,7 +331,7 @@ static int u32_writer(struct driver_data *drv_data)
{
void __iomem *reg = drv_data->ioaddr;
- if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
|| (drv_data->tx == drv_data->tx_end))
return 0;
@@ -507,9 +532,9 @@ static void dma_error_stop(struct driver_data *drv_data, const char *msg)
/* Stop and reset */
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- write_SSSR(drv_data->clear_sr, reg);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
flush(drv_data);
write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
@@ -529,7 +554,7 @@ static void dma_transfer_complete(struct driver_data *drv_data)
/* Clear and disable interrupts on SSP and DMA channels*/
write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- write_SSSR(drv_data->clear_sr, reg);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
@@ -622,7 +647,7 @@ static irqreturn_t dma_transfer(struct driver_data *drv_data)
/* Clear and disable timeout interrupt, do the rest in
* dma_transfer_complete */
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
/* finish this transfer, start the next */
@@ -635,14 +660,26 @@ static irqreturn_t dma_transfer(struct driver_data *drv_data)
return IRQ_NONE;
}
+static void reset_sccr1(struct driver_data *drv_data)
+{
+ void __iomem *reg = drv_data->ioaddr;
+ struct chip_data *chip = drv_data->cur_chip;
+ u32 sccr1_reg;
+
+ sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1;
+ sccr1_reg &= ~SSCR1_RFT;
+ sccr1_reg |= chip->threshold;
+ write_SSCR1(sccr1_reg, reg);
+}
+
static void int_error_stop(struct driver_data *drv_data, const char* msg)
{
void __iomem *reg = drv_data->ioaddr;
/* Stop and reset SSP */
- write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
+ reset_sccr1(drv_data);
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
flush(drv_data);
write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
@@ -658,9 +695,9 @@ static void int_transfer_complete(struct driver_data *drv_data)
void __iomem *reg = drv_data->ioaddr;
/* Stop SSP */
- write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
+ reset_sccr1(drv_data);
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
/* Update total byte transfered return count actual bytes read */
@@ -714,24 +751,34 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
}
if (drv_data->tx == drv_data->tx_end) {
- write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
- /* PXA25x_SSP has no timeout, read trailing bytes */
- if (drv_data->ssp_type == PXA25x_SSP) {
- if (!wait_ssp_rx_stall(reg))
- {
- int_error_stop(drv_data, "interrupt_transfer: "
- "rx stall failed");
- return IRQ_HANDLED;
- }
- if (!drv_data->read(drv_data))
- {
- int_error_stop(drv_data,
- "interrupt_transfer: "
- "trailing byte read failed");
- return IRQ_HANDLED;
+ u32 bytes_left;
+ u32 sccr1_reg;
+
+ sccr1_reg = read_SSCR1(reg);
+ sccr1_reg &= ~SSCR1_TIE;
+
+ /*
+ * PXA25x_SSP has no timeout, set up rx threshould for the
+ * remaing RX bytes.
+ */
+ if (pxa25x_ssp_comp(drv_data)) {
+
+ sccr1_reg &= ~SSCR1_RFT;
+
+ bytes_left = drv_data->rx_end - drv_data->rx;
+ switch (drv_data->n_bytes) {
+ case 4:
+ bytes_left >>= 1;
+ case 2:
+ bytes_left >>= 1;
}
- int_transfer_complete(drv_data);
+
+ if (bytes_left > RX_THRESH_DFLT)
+ bytes_left = RX_THRESH_DFLT;
+
+ sccr1_reg |= SSCR1_RxTresh(bytes_left);
}
+ write_SSCR1(sccr1_reg, reg);
}
/* We did something */
@@ -742,14 +789,26 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
{
struct driver_data *drv_data = dev_id;
void __iomem *reg = drv_data->ioaddr;
+ u32 sccr1_reg = read_SSCR1(reg);
+ u32 mask = drv_data->mask_sr;
+ u32 status;
+
+ status = read_SSSR(reg);
+
+ /* Ignore possible writes if we don't need to write */
+ if (!(sccr1_reg & SSCR1_TIE))
+ mask &= ~SSSR_TFS;
+
+ if (!(status & mask))
+ return IRQ_NONE;
if (!drv_data->cur_msg) {
write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
- write_SSSR(drv_data->clear_sr, reg);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
dev_err(&drv_data->pdev->dev, "bad message state "
"in interrupt handler\n");
@@ -862,7 +921,7 @@ static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
{
unsigned long ssp_clk = clk_get_rate(ssp->clk);
- if (ssp->type == PXA25x_SSP)
+ if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
else
return ((ssp_clk / rate - 1) & 0xfff) << 8;
@@ -1088,7 +1147,7 @@ static void pump_transfers(unsigned long data)
/* Clear status */
cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
- write_SSSR(drv_data->clear_sr, reg);
+ write_SSSR_CS(drv_data, drv_data->clear_sr);
}
/* see if we need to reload the config registers */
@@ -1098,7 +1157,7 @@ static void pump_transfers(unsigned long data)
/* stop the SSP, and update the other bits */
write_SSCR0(cr0 & ~SSCR0_SSE, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(chip->timeout, reg);
/* first set CR1 without interrupt and service enables */
write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg);
@@ -1106,7 +1165,7 @@ static void pump_transfers(unsigned long data)
write_SSCR0(cr0, reg);
} else {
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(chip->timeout, reg);
}
@@ -1233,14 +1292,13 @@ static int setup(struct spi_device *spi)
uint tx_thres = TX_THRESH_DFLT;
uint rx_thres = RX_THRESH_DFLT;
- if (drv_data->ssp_type != PXA25x_SSP
+ if (!pxa25x_ssp_comp(drv_data)
&& (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
"b/w not 4-32 for type non-PXA25x_SSP\n",
drv_data->ssp_type, spi->bits_per_word);
return -EINVAL;
- }
- else if (drv_data->ssp_type == PXA25x_SSP
+ } else if (pxa25x_ssp_comp(drv_data)
&& (spi->bits_per_word < 4
|| spi->bits_per_word > 16)) {
dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
@@ -1259,7 +1317,17 @@ static int setup(struct spi_device *spi)
return -ENOMEM;
}
- chip->gpio_cs = -1;
+ if (drv_data->ssp_type == CE4100_SSP) {
+ if (spi->chip_select > 4) {
+ dev_err(&spi->dev, "failed setup: "
+ "cs number must not be > 4.\n");
+ kfree(chip);
+ return -EINVAL;
+ }
+
+ chip->frm = spi->chip_select;
+ } else
+ chip->gpio_cs = -1;
chip->enable_dma = 0;
chip->timeout = TIMOUT_DFLT;
chip->dma_burst_size = drv_data->master_info->enable_dma ?
@@ -1315,7 +1383,7 @@ static int setup(struct spi_device *spi)
| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
clk_get_rate(ssp->clk)
/ (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
@@ -1350,23 +1418,27 @@ static int setup(struct spi_device *spi)
spi_set_ctldata(spi, chip);
+ if (drv_data->ssp_type == CE4100_SSP)
+ return 0;
+
return setup_cs(spi, chip, chip_info);
}
static void cleanup(struct spi_device *spi)
{
struct chip_data *chip = spi_get_ctldata(spi);
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
if (!chip)
return;
- if (gpio_is_valid(chip->gpio_cs))
+ if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs))
gpio_free(chip->gpio_cs);
kfree(chip);
}
-static int __init init_queue(struct driver_data *drv_data)
+static int __devinit init_queue(struct driver_data *drv_data)
{
INIT_LIST_HEAD(&drv_data->queue);
spin_lock_init(&drv_data->lock);
@@ -1454,7 +1526,7 @@ static int destroy_queue(struct driver_data *drv_data)
return 0;
}
-static int __init pxa2xx_spi_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct pxa2xx_spi_master *platform_info;
@@ -1484,6 +1556,10 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
drv_data->pdev = pdev;
drv_data->ssp = ssp;
+ master->dev.parent = &pdev->dev;
+#ifdef CONFIG_OF
+ master->dev.of_node = pdev->dev.of_node;
+#endif
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
@@ -1500,7 +1576,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
drv_data->ioaddr = ssp->mmio_base;
drv_data->ssdr_physical = ssp->phys_base + SSDR;
- if (ssp->type == PXA25x_SSP) {
+ if (pxa25x_ssp_comp(drv_data)) {
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
drv_data->dma_cr1 = 0;
drv_data->clear_sr = SSSR_ROR;
@@ -1512,7 +1588,8 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
}
- status = request_irq(ssp->irq, ssp_int, 0, dev_name(dev), drv_data);
+ status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev),
+ drv_data);
if (status < 0) {
dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
goto out_error_master_alloc;
@@ -1561,7 +1638,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
| SSCR0_Motorola
| SSCR0_DataSize(8),
drv_data->ioaddr);
- if (drv_data->ssp_type != PXA25x_SSP)
+ if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, drv_data->ioaddr);
write_SSPSP(0, drv_data->ioaddr);
@@ -1723,13 +1800,14 @@ static struct platform_driver driver = {
.pm = &pxa2xx_spi_pm_ops,
#endif
},
+ .probe = pxa2xx_spi_probe,
.remove = pxa2xx_spi_remove,
.shutdown = pxa2xx_spi_shutdown,
};
static int __init pxa2xx_spi_init(void)
{
- return platform_driver_probe(&driver, pxa2xx_spi_probe);
+ return platform_driver_register(&driver);
}
subsys_initcall(pxa2xx_spi_init);
diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c
new file mode 100644
index 000000000000..351d8a375b57
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi_pci.c
@@ -0,0 +1,201 @@
+/*
+ * CE4100's SPI device is more or less the same one as found on PXA
+ *
+ */
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+struct awesome_struct {
+ struct ssp_device ssp;
+ struct platform_device spi_pdev;
+ struct pxa2xx_spi_master spi_pdata;
+};
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+ struct ssp_device *ssp = NULL;
+
+ mutex_lock(&ssp_lock);
+
+ list_for_each_entry(ssp, &ssp_list, node) {
+ if (ssp->port_id == port && ssp->use_count == 0) {
+ ssp->use_count++;
+ ssp->label = label;
+ break;
+ }
+ }
+
+ mutex_unlock(&ssp_lock);
+
+ if (&ssp->node == &ssp_list)
+ return NULL;
+
+ return ssp;
+}
+EXPORT_SYMBOL_GPL(pxa_ssp_request);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+ mutex_lock(&ssp_lock);
+ if (ssp->use_count) {
+ ssp->use_count--;
+ ssp->label = NULL;
+ } else
+ dev_err(&ssp->pdev->dev, "device already free\n");
+ mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL_GPL(pxa_ssp_free);
+
+static void plat_dev_release(struct device *dev)
+{
+ struct awesome_struct *as = container_of(dev,
+ struct awesome_struct, spi_pdev.dev);
+
+ of_device_node_put(&as->spi_pdev.dev);
+}
+
+static int __devinit ce4100_spi_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ int ret;
+ resource_size_t phys_beg;
+ resource_size_t phys_len;
+ struct awesome_struct *spi_info;
+ struct platform_device *pdev;
+ struct pxa2xx_spi_master *spi_pdata;
+ struct ssp_device *ssp;
+
+ ret = pci_enable_device(dev);
+ if (ret)
+ return ret;
+
+ phys_beg = pci_resource_start(dev, 0);
+ phys_len = pci_resource_len(dev, 0);
+
+ if (!request_mem_region(phys_beg, phys_len,
+ "CE4100 SPI")) {
+ dev_err(&dev->dev, "Can't request register space.\n");
+ ret = -EBUSY;
+ return ret;
+ }
+
+ spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
+ if (!spi_info) {
+ ret = -ENOMEM;
+ goto err_kz;
+ }
+ ssp = &spi_info->ssp;
+ pdev = &spi_info->spi_pdev;
+ spi_pdata = &spi_info->spi_pdata;
+
+ pdev->name = "pxa2xx-spi";
+ pdev->id = dev->devfn;
+ pdev->dev.parent = &dev->dev;
+ pdev->dev.platform_data = &spi_info->spi_pdata;
+
+#ifdef CONFIG_OF
+ pdev->dev.of_node = dev->dev.of_node;
+#endif
+ pdev->dev.release = plat_dev_release;
+
+ spi_pdata->num_chipselect = dev->devfn;
+
+ ssp->phys_base = pci_resource_start(dev, 0);
+ ssp->mmio_base = ioremap(phys_beg, phys_len);
+ if (!ssp->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -EIO;
+ goto err_remap;
+ }
+ ssp->irq = dev->irq;
+ ssp->port_id = pdev->id;
+ ssp->type = PXA25x_SSP;
+
+ mutex_lock(&ssp_lock);
+ list_add(&ssp->node, &ssp_list);
+ mutex_unlock(&ssp_lock);
+
+ pci_set_drvdata(dev, spi_info);
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ goto err_dev_add;
+
+ return ret;
+
+err_dev_add:
+ pci_set_drvdata(dev, NULL);
+ mutex_lock(&ssp_lock);
+ list_del(&ssp->node);
+ mutex_unlock(&ssp_lock);
+ iounmap(ssp->mmio_base);
+
+err_remap:
+ kfree(spi_info);
+
+err_kz:
+ release_mem_region(phys_beg, phys_len);
+
+ return ret;
+}
+
+static void __devexit ce4100_spi_remove(struct pci_dev *dev)
+{
+ struct awesome_struct *spi_info;
+ struct platform_device *pdev;
+ struct ssp_device *ssp;
+
+ spi_info = pci_get_drvdata(dev);
+
+ ssp = &spi_info->ssp;
+ pdev = &spi_info->spi_pdev;
+
+ platform_device_unregister(pdev);
+
+ iounmap(ssp->mmio_base);
+ release_mem_region(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
+
+ mutex_lock(&ssp_lock);
+ list_del(&ssp->node);
+ mutex_unlock(&ssp_lock);
+
+ pci_set_drvdata(dev, NULL);
+ pci_disable_device(dev);
+ kfree(spi_info);
+}
+
+static struct pci_device_id ce4100_spi_devices[] __devinitdata = {
+
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) },
+ { },
+};
+MODULE_DEVICE_TABLE(pci, ce4100_spi_devices);
+
+static struct pci_driver ce4100_spi_driver = {
+ .name = "ce4100_spi",
+ .id_table = ce4100_spi_devices,
+ .probe = ce4100_spi_probe,
+ .remove = __devexit_p(ce4100_spi_remove),
+};
+
+static int __init ce4100_spi_init(void)
+{
+ return pci_register_driver(&ce4100_spi_driver);
+}
+module_init(ce4100_spi_init);
+
+static void __exit ce4100_spi_exit(void)
+{
+ pci_unregister_driver(&ce4100_spi_driver);
+}
+module_exit(ce4100_spi_exit);
+
+MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 55a38e2c6c13..9469564e6888 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -66,7 +66,6 @@ enum spi_imx_devtype {
SPI_IMX_VER_0_5,
SPI_IMX_VER_0_7,
SPI_IMX_VER_2_3,
- SPI_IMX_VER_AUTODETECT,
};
struct spi_imx_data;
@@ -720,9 +719,6 @@ static void spi_imx_cleanup(struct spi_device *spi)
static struct platform_device_id spi_imx_devtype[] = {
{
- .name = DRIVER_NAME,
- .driver_data = SPI_IMX_VER_AUTODETECT,
- }, {
.name = "imx1-cspi",
.driver_data = SPI_IMX_VER_IMX1,
}, {
@@ -802,30 +798,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
init_completion(&spi_imx->xfer_done);
- if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) {
- if (cpu_is_mx25() || cpu_is_mx35())
- spi_imx->devtype_data =
- spi_imx_devtype_data[SPI_IMX_VER_0_7];
- else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
- spi_imx->devtype_data =
- spi_imx_devtype_data[SPI_IMX_VER_0_4];
- else if (cpu_is_mx27() || cpu_is_mx21())
- spi_imx->devtype_data =
- spi_imx_devtype_data[SPI_IMX_VER_0_0];
- else if (cpu_is_mx1())
- spi_imx->devtype_data =
- spi_imx_devtype_data[SPI_IMX_VER_IMX1];
- else
- BUG();
- } else
- spi_imx->devtype_data =
- spi_imx_devtype_data[pdev->id_entry->driver_data];
-
- if (!spi_imx->devtype_data.intctrl) {
- dev_err(&pdev->dev, "no support for this device compiled in\n");
- ret = -ENODEV;
- goto out_gpio_free;
- }
+ spi_imx->devtype_data =
+ spi_imx_devtype_data[pdev->id_entry->driver_data];
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -847,7 +821,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
}
spi_imx->irq = platform_get_irq(pdev, 0);
- if (spi_imx->irq <= 0) {
+ if (spi_imx->irq < 0) {
ret = -EINVAL;
goto out_iounmap;
}
diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi_nuc900.c
index dff63be0d0a8..d5be18b3078c 100644
--- a/drivers/spi/spi_nuc900.c
+++ b/drivers/spi/spi_nuc900.c
@@ -449,7 +449,7 @@ err_iomap:
release_mem_region(hw->res->start, resource_size(hw->res));
kfree(hw->ioarea);
err_pdata:
- spi_master_put(hw->master);;
+ spi_master_put(hw->master);
err_nomem:
return err;
diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c
index 58e187f45ec7..79e48d451137 100644
--- a/drivers/spi/spi_topcliff_pch.c
+++ b/drivers/spi/spi_topcliff_pch.c
@@ -267,7 +267,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
if (reg_spsr_val & SPSR_FI_BIT) {
/* disable FI & RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
- SPCR_FIE_BIT | SPCR_TFIE_BIT);
+ SPCR_FIE_BIT | SPCR_RFIE_BIT);
/* transfer is completed;inform pch_spi_process_messages */
data->transfer_complete = true;
@@ -677,15 +677,15 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
{
/* enable interrupts */
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
- /* set receive threhold to PCH_RX_THOLD */
+ /* set receive threshold to PCH_RX_THOLD */
pch_spi_setclr_reg(data->master, PCH_SPCR,
- PCH_RX_THOLD << SPCR_TFIC_FIELD,
- ~MASK_TFIC_SPCR_BITS);
+ PCH_RX_THOLD << SPCR_RFIC_FIELD,
+ ~MASK_RFIC_SPCR_BITS);
/* enable FI and RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR,
- SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0);
+ SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
} else {
- /* set receive threhold to maximum */
+ /* set receive threshold to maximum */
pch_spi_setclr_reg(data->master, PCH_SPCR,
PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD,
~MASK_TFIC_SPCR_BITS);
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 80f2db5bcfd6..7adaef62a991 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -1,26 +1,27 @@
/*
- * xilinx_spi.c
- *
* Xilinx SPI controller driver (master mode only)
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
- * 2002-2007 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
+ * Copyright (c) 2010 Secret Lab Technologies, Ltd.
+ * Copyright (c) 2009 Intel Corporation
+ * 2002-2007 (c) MontaVista Software, Inc.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-
+#include <linux/of.h>
+#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-#include <linux/io.h>
-
-#include "xilinx_spi.h"
#include <linux/spi/xilinx_spi.h>
+#include <linux/io.h>
#define XILINX_SPI_NAME "xilinx_spi"
@@ -350,19 +351,22 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static const struct of_device_id xilinx_spi_of_match[] = {
+ { .compatible = "xlnx,xps-spi-2.00.a", },
+ { .compatible = "xlnx,xps-spi-2.00.b", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+#endif
+
struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
- u32 irq, s16 bus_num)
+ u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
{
struct spi_master *master;
struct xilinx_spi *xspi;
- struct xspi_platform_data *pdata = dev->platform_data;
int ret;
- if (!pdata) {
- dev_err(dev, "No platform data attached\n");
- return NULL;
- }
-
master = spi_alloc_master(dev, sizeof(struct xilinx_spi));
if (!master)
return NULL;
@@ -389,21 +393,21 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
}
master->bus_num = bus_num;
- master->num_chipselect = pdata->num_chipselect;
+ master->num_chipselect = num_cs;
#ifdef CONFIG_OF
master->dev.of_node = dev->of_node;
#endif
xspi->mem = *mem;
xspi->irq = irq;
- if (pdata->little_endian) {
+ if (little_endian) {
xspi->read_fn = xspi_read32;
xspi->write_fn = xspi_write32;
} else {
xspi->read_fn = xspi_read32_be;
xspi->write_fn = xspi_write32_be;
}
- xspi->bits_per_word = pdata->bits_per_word;
+ xspi->bits_per_word = bits_per_word;
if (xspi->bits_per_word == 8) {
xspi->tx_fn = xspi_tx8;
xspi->rx_fn = xspi_rx8;
@@ -462,6 +466,97 @@ void xilinx_spi_deinit(struct spi_master *master)
}
EXPORT_SYMBOL(xilinx_spi_deinit);
+static int __devinit xilinx_spi_probe(struct platform_device *dev)
+{
+ struct xspi_platform_data *pdata;
+ struct resource *r;
+ int irq, num_cs = 0, little_endian = 0, bits_per_word = 8;
+ struct spi_master *master;
+ u8 i;
+
+ pdata = dev->dev.platform_data;
+ if (pdata) {
+ num_cs = pdata->num_chipselect;
+ little_endian = pdata->little_endian;
+ bits_per_word = pdata->bits_per_word;
+ }
+
+#ifdef CONFIG_OF
+ if (dev->dev.of_node) {
+ const __be32 *prop;
+ int len;
+
+ /* number of slave select bits is required */
+ prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits",
+ &len);
+ if (prop && len >= sizeof(*prop))
+ num_cs = __be32_to_cpup(prop);
+ }
+#endif
+
+ if (!num_cs) {
+ dev_err(&dev->dev, "Missing slave select configuration data\n");
+ return -EINVAL;
+ }
+
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs,
+ little_endian, bits_per_word);
+ if (!master)
+ return -ENODEV;
+
+ if (pdata) {
+ for (i = 0; i < pdata->num_devices; i++)
+ spi_new_device(master, pdata->devices + i);
+ }
+
+ platform_set_drvdata(dev, master);
+ return 0;
+}
+
+static int __devexit xilinx_spi_remove(struct platform_device *dev)
+{
+ xilinx_spi_deinit(platform_get_drvdata(dev));
+ platform_set_drvdata(dev, 0);
+
+ return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" XILINX_SPI_NAME);
+
+static struct platform_driver xilinx_spi_driver = {
+ .probe = xilinx_spi_probe,
+ .remove = __devexit_p(xilinx_spi_remove),
+ .driver = {
+ .name = XILINX_SPI_NAME,
+ .owner = THIS_MODULE,
+#ifdef CONFIG_OF
+ .of_match_table = xilinx_spi_of_match,
+#endif
+ },
+};
+
+static int __init xilinx_spi_pltfm_init(void)
+{
+ return platform_driver_register(&xilinx_spi_driver);
+}
+module_init(xilinx_spi_pltfm_init);
+
+static void __exit xilinx_spi_pltfm_exit(void)
+{
+ platform_driver_unregister(&xilinx_spi_driver);
+}
+module_exit(xilinx_spi_pltfm_exit);
+
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx SPI driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/xilinx_spi.h b/drivers/spi/xilinx_spi.h
deleted file mode 100644
index d211accf68d2..000000000000
--- a/drivers/spi/xilinx_spi.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Xilinx SPI device driver API and platform data header file
- *
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _XILINX_SPI_H_
-#define _XILINX_SPI_H_
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-#define XILINX_SPI_NAME "xilinx_spi"
-
-struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
- u32 irq, s16 bus_num);
-
-void xilinx_spi_deinit(struct spi_master *master);
-#endif
diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c
deleted file mode 100644
index b66c2dbf20a5..000000000000
--- a/drivers/spi/xilinx_spi_of.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Xilinx SPI OF device driver
- *
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Xilinx SPI devices as OF devices
- *
- * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-#include <linux/of_spi.h>
-
-#include <linux/spi/xilinx_spi.h>
-#include "xilinx_spi.h"
-
-
-static int __devinit xilinx_spi_of_probe(struct platform_device *ofdev,
- const struct of_device_id *match)
-{
- struct spi_master *master;
- struct xspi_platform_data *pdata;
- struct resource r_mem;
- struct resource r_irq;
- int rc = 0;
- const u32 *prop;
- int len;
-
- rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
- if (rc) {
- dev_warn(&ofdev->dev, "invalid address\n");
- return rc;
- }
-
- rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
- if (rc == NO_IRQ) {
- dev_warn(&ofdev->dev, "no IRQ found\n");
- return -ENODEV;
- }
-
- ofdev->dev.platform_data =
- kzalloc(sizeof(struct xspi_platform_data), GFP_KERNEL);
- pdata = ofdev->dev.platform_data;
- if (!pdata)
- return -ENOMEM;
-
- /* number of slave select bits is required */
- prop = of_get_property(ofdev->dev.of_node, "xlnx,num-ss-bits", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
- return -EINVAL;
- }
- pdata->num_chipselect = *prop;
- pdata->bits_per_word = 8;
- master = xilinx_spi_init(&ofdev->dev, &r_mem, r_irq.start, -1);
- if (!master)
- return -ENODEV;
-
- dev_set_drvdata(&ofdev->dev, master);
-
- return 0;
-}
-
-static int __devexit xilinx_spi_remove(struct platform_device *ofdev)
-{
- xilinx_spi_deinit(dev_get_drvdata(&ofdev->dev));
- dev_set_drvdata(&ofdev->dev, 0);
- kfree(ofdev->dev.platform_data);
- ofdev->dev.platform_data = NULL;
- return 0;
-}
-
-static int __exit xilinx_spi_of_remove(struct platform_device *op)
-{
- return xilinx_spi_remove(op);
-}
-
-static const struct of_device_id xilinx_spi_of_match[] = {
- { .compatible = "xlnx,xps-spi-2.00.a", },
- { .compatible = "xlnx,xps-spi-2.00.b", },
- {}
-};
-
-MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-
-static struct of_platform_driver xilinx_spi_of_driver = {
- .probe = xilinx_spi_of_probe,
- .remove = __exit_p(xilinx_spi_of_remove),
- .driver = {
- .name = "xilinx-xps-spi",
- .owner = THIS_MODULE,
- .of_match_table = xilinx_spi_of_match,
- },
-};
-
-static int __init xilinx_spi_of_init(void)
-{
- return of_register_platform_driver(&xilinx_spi_of_driver);
-}
-module_init(xilinx_spi_of_init);
-
-static void __exit xilinx_spi_of_exit(void)
-{
- of_unregister_platform_driver(&xilinx_spi_of_driver);
-}
-module_exit(xilinx_spi_of_exit);
-
-MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
-MODULE_DESCRIPTION("Xilinx SPI platform driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/xilinx_spi_pltfm.c b/drivers/spi/xilinx_spi_pltfm.c
deleted file mode 100644
index 24debac646a9..000000000000
--- a/drivers/spi/xilinx_spi_pltfm.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Support for Xilinx SPI platform devices
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Xilinx SPI devices as platform devices
- *
- * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/spi/xilinx_spi.h>
-
-#include "xilinx_spi.h"
-
-static int __devinit xilinx_spi_probe(struct platform_device *dev)
-{
- struct xspi_platform_data *pdata;
- struct resource *r;
- int irq;
- struct spi_master *master;
- u8 i;
-
- pdata = dev->dev.platform_data;
- if (!pdata)
- return -ENODEV;
-
- r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENODEV;
-
- irq = platform_get_irq(dev, 0);
- if (irq < 0)
- return -ENXIO;
-
- master = xilinx_spi_init(&dev->dev, r, irq, dev->id);
- if (!master)
- return -ENODEV;
-
- for (i = 0; i < pdata->num_devices; i++)
- spi_new_device(master, pdata->devices + i);
-
- platform_set_drvdata(dev, master);
- return 0;
-}
-
-static int __devexit xilinx_spi_remove(struct platform_device *dev)
-{
- xilinx_spi_deinit(platform_get_drvdata(dev));
- platform_set_drvdata(dev, 0);
-
- return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:" XILINX_SPI_NAME);
-
-static struct platform_driver xilinx_spi_driver = {
- .probe = xilinx_spi_probe,
- .remove = __devexit_p(xilinx_spi_remove),
- .driver = {
- .name = XILINX_SPI_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init xilinx_spi_pltfm_init(void)
-{
- return platform_driver_register(&xilinx_spi_driver);
-}
-module_init(xilinx_spi_pltfm_init);
-
-static void __exit xilinx_spi_pltfm_exit(void)
-{
- platform_driver_unregister(&xilinx_spi_driver);
-}
-module_exit(xilinx_spi_pltfm_exit);
-
-MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
-MODULE_DESCRIPTION("Xilinx SPI platform driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-pxa/include/plat/ssp.h b/include/linux/pxa2xx_ssp.h
index fe43150690ed..2f691e4e6222 100644
--- a/arch/arm/plat-pxa/include/plat/ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -1,5 +1,5 @@
/*
- * ssp.h
+ * pxa2xx_ssp.h
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
*
@@ -16,8 +16,8 @@
* PXA3xx SSP1, SSP2, SSP3, SSP4
*/
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
+#ifndef __LINUX_SSP_H
+#define __LINUX_SSP_H
#include <linux/list.h>
#include <linux/io.h>
@@ -71,11 +71,8 @@
#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
-#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
#define SSSR_BSY (1 << 4) /* SSP Busy */
@@ -83,6 +80,31 @@
#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
+#ifdef CONFIG_ARCH_PXA
+#define RX_THRESH_DFLT 8
+#define TX_THRESH_DFLT 8
+
+#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
+
+#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#else
+
+#define RX_THRESH_DFLT 2
+#define TX_THRESH_DFLT 2
+
+#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */
+
+#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
+#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
+#endif
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
@@ -139,6 +161,7 @@ enum pxa_ssp_type {
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
PXA168_SSP,
+ CE4100_SSP,
};
struct ssp_device {
@@ -183,4 +206,4 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
struct ssp_device *pxa_ssp_request(int port, const char *label);
void pxa_ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */
+#endif
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h
index c91302f3a257..6cd10f6ad472 100644
--- a/include/linux/spi/dw_spi.h
+++ b/include/linux/spi/dw_spi.h
@@ -1,5 +1,6 @@
#ifndef DW_SPI_HEADER_H
#define DW_SPI_HEADER_H
+
#include <linux/io.h>
/* Bit fields in CTRLR0 */
@@ -82,6 +83,13 @@ struct dw_spi_reg {
though only low 16 bits matters */
} __packed;
+struct dw_spi;
+struct dw_spi_dma_ops {
+ int (*dma_init)(struct dw_spi *dws);
+ void (*dma_exit)(struct dw_spi *dws);
+ int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+};
+
struct dw_spi {
struct spi_master *master;
struct spi_device *cur_dev;
@@ -136,13 +144,15 @@ struct dw_spi {
/* Dma info */
int dma_inited;
struct dma_chan *txchan;
+ struct scatterlist tx_sgl;
struct dma_chan *rxchan;
- int txdma_done;
- int rxdma_done;
- u64 tx_param;
- u64 rx_param;
+ struct scatterlist rx_sgl;
+ int dma_chan_done;
struct device *dma_dev;
- dma_addr_t dma_addr;
+ dma_addr_t dma_addr; /* phy address of the Data register */
+ struct dw_spi_dma_ops *dma_ops;
+ void *dma_priv; /* platform relate info */
+ struct pci_dev *dmac;
/* Bus interface info */
void *priv;
@@ -216,4 +226,8 @@ extern int dw_spi_add_host(struct dw_spi *dws);
extern void dw_spi_remove_host(struct dw_spi *dws);
extern int dw_spi_suspend_host(struct dw_spi *dws);
extern int dw_spi_resume_host(struct dw_spi *dws);
+extern void dw_spi_xfer_done(struct dw_spi *dws);
+
+/* platform related setup */
+extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
#endif /* DW_SPI_HEADER_H */
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
new file mode 100644
index 000000000000..d3e1075f7b60
--- /dev/null
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __linux_pxa2xx_spi_h
+#define __linux_pxa2xx_spi_h
+
+#include <linux/pxa2xx_ssp.h>
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+ u32 clock_enable;
+ u16 num_chipselect;
+ u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+ u8 tx_threshold;
+ u8 rx_threshold;
+ u8 dma_burst_size;
+ u32 timeout;
+ u8 enable_loopback;
+ int gpio_cs;
+ void (*cs_control)(u32 command);
+};
+
+#ifdef CONFIG_ARCH_PXA
+
+#include <linux/clk.h>
+#include <mach/dma.h>
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#else
+/*
+ * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
+ * plat/ include path.
+ * The CE4100 does not provide DMA support. This bits are here to let the driver
+ * compile and will never be used. Maybe we get DMA support at a later point in
+ * time.
+ */
+
+#define DCSR(n) (n)
+#define DSADR(n) (n)
+#define DTADR(n) (n)
+#define DCMD(n) (n)
+#define DRCMR(n) (n)
+
+#define DCSR_RUN (1 << 31) /* Run Bit */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */
+
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */
+#define DDADR_STOP (1 << 0) /* Stop */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+static inline int pxa_request_dma(char *name,
+ pxa_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void *data)
+{
+ return -ENODEV;
+}
+
+static inline void pxa_free_dma(int dma_ch)
+{
+}
+
+/*
+ * The CE4100 does not have the clk framework implemented and SPI clock can
+ * not be switched on/off or the divider changed.
+ */
+static inline void clk_disable(struct clk *clk)
+{
+}
+
+static inline int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+ return 3686400;
+}
+
+#endif
+#endif
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index b439eee462cb..8ad93ee2e92b 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/pxa2xx_ssp.h>
#include <asm/irq.h>
@@ -33,7 +34,6 @@
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/audio.h>
-#include <plat/ssp.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"