diff options
| -rw-r--r-- | drivers/usb/core/buffer.c | 2 | ||||
| -rw-r--r-- | drivers/usb/core/devio.c | 2 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 2 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 7 | ||||
| -rw-r--r-- | drivers/usb/core/hub.h | 2 | ||||
| -rw-r--r-- | drivers/usb/core/message.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/sysfs.c | 2 | ||||
| -rw-r--r-- | drivers/usb/core/urb.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/usb-acpi.c | 2 |
9 files changed, 14 insertions, 13 deletions
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 23559746be92..684ef70dc09d 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -2,7 +2,7 @@ * DMA memory management for framework level HCD code (hc_driver) * * This implementation plugs in through generic "usb_bus" level methods, - * and should work with all USB controllers, regardles of bus type. + * and should work with all USB controllers, regardless of bus type. */ #include <linux/module.h> diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 967152a63bd3..90e18f6fa2bb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -118,7 +118,7 @@ module_param(usbfs_memory_mb, uint, 0644); MODULE_PARM_DESC(usbfs_memory_mb, "maximum MB allowed for usbfs buffers (0 = no limit)"); -/* Hard limit, necessary to avoid aithmetic overflow */ +/* Hard limit, necessary to avoid arithmetic overflow */ #define USBFS_XFER_MAX (UINT_MAX / 2 - 1000000) static atomic_t usbfs_memory_usage; /* Total memory currently allocated */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6297c9e50de2..199aaea6bfe0 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1298,7 +1298,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); * DMA framework is dma_declare_coherent_memory() * * - So we use that, even though the primary requirement - * is that the memory be "local" (hence addressible + * is that the memory be "local" (hence addressable * by that device), not "coherent". * */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9e49c6d6e4a2..c1422a04c991 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2513,7 +2513,7 @@ static bool use_new_scheme(struct usb_device *udev, int retry) static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay, bool warm); -/* Is a USB 3.0 port in the Inactive or Complinance Mode state? +/* Is a USB 3.0 port in the Inactive or Compliance Mode state? * Port worm reset is required to recover */ static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus) @@ -3321,7 +3321,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) udev = hub->ports[port1 - 1]->child; if (udev && udev->can_submit) { - dev_warn(&intf->dev, "port %d nyet suspended\n", port1); + dev_warn(&intf->dev, "port %d not suspended yet\n", + port1); if (PMSG_IS_AUTO(msg)) return -EBUSY; } @@ -4912,7 +4913,7 @@ static void hub_events(void) static int hub_thread(void *__unused) { - /* khubd needs to be freezable to avoid intefering with USB-PERSIST + /* khubd needs to be freezable to avoid interfering with USB-PERSIST * port handover. Otherwise it might see that a full-speed device * was gone before the EHCI controller had handed its port over to * the companion full-speed controller. diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 4e4790dea343..df629a310e44 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -78,7 +78,7 @@ struct usb_hub { /** * struct usb port - kernel's representation of a usb port - * @child: usb device attatched to the port + * @child: usb device attached to the port * @dev: generic device interface * @port_owner: port's owner * @connect_type: port's connect type diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index bb315970e475..854a41972085 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -218,7 +218,7 @@ EXPORT_SYMBOL_GPL(usb_interrupt_msg); * * Return: * If successful, 0. Otherwise a negative error number. The number of actual - * bytes transferred will be stored in the @actual_length paramater. + * bytes transferred will be stored in the @actual_length parameter. * */ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, @@ -518,7 +518,7 @@ void usb_sg_wait(struct usb_sg_request *io) io->urbs[i]->dev = io->dev; retval = usb_submit_urb(io->urbs[i], GFP_ATOMIC); - /* after we submit, let completions or cancelations fire; + /* after we submit, let completions or cancellations fire; * we handshake using io->status. */ spin_unlock_irq(&io->lock); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 52a97adf02a0..1236c6011c70 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -837,7 +837,7 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev) device_remove_bin_file(dev, &dev_bin_attr_descriptors); } -/* Interface Accociation Descriptor fields */ +/* Interface Association Descriptor fields */ #define usb_intf_assoc_attr(field, format_string) \ static ssize_t \ iad_##field##_show(struct device *dev, struct device_attribute *attr, \ diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index f4cb7fc1c929..172d2698b8db 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -53,7 +53,7 @@ EXPORT_SYMBOL_GPL(usb_init_urb); * valid options for this. * * Creates an urb for the USB driver to use, initializes a few internal - * structures, incrementes the usage counter, and returns a pointer to it. + * structures, increments the usage counter, and returns a pointer to it. * * If the driver want to use this urb for interrupt, control, or bulk * endpoints, pass '0' as the number of iso packets. @@ -281,7 +281,7 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb); * * Device drivers must explicitly request that repetition, by ensuring that * some URB is always on the endpoint's queue (except possibly for short - * periods during completion callacks). When there is no longer an urb + * periods during completion callbacks). When there is no longer an urb * queued, the endpoint's bandwidth reservation is canceled. This means * drivers can use their completion handlers to ensure they keep bandwidth * they need, by reinitializing and resubmitting the just-completed urb diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index 4e243c37f17f..d7cb822d6eab 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -92,7 +92,7 @@ static int usb_acpi_check_port_connect_type(struct usb_device *hdev, int ret = 0; /* - * Accoding to ACPI Spec 9.13. PLD indicates whether usb port is + * According to ACPI Spec 9.13. PLD indicates whether usb port is * user visible and _UPC indicates whether it is connectable. If * the port was visible and connectable, it could be freely connected * and disconnected with USB devices. If no visible and connectable, |