diff options
| -rw-r--r-- | drivers/regulator/core.c | 7 | ||||
| -rw-r--r-- | drivers/regulator/dbx500-prcmu.c | 24 | ||||
| -rw-r--r-- | drivers/regulator/palmas-regulator.c | 4 |
3 files changed, 19 insertions, 16 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e5017841582..815d6df8bd5f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1539,7 +1539,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) } /** - * Balance enable_count of each GPIO and actual GPIO pin control. + * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control + * @rdev: regulator_dev structure + * @enable: enable GPIO at initial use? + * * GPIO is enabled in case of initial use. (enable_count is 0) * GPIO is disabled when it is not shared any more. (enable_count <= 1) */ @@ -2702,7 +2705,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage); /** * regulator_set_current_limit - set regulator output current limit * @regulator: regulator source - * @min_uA: Minimuum supported current in uA + * @min_uA: Minimum supported current in uA * @max_uA: Maximum supported current in uA * * Sets current sink to the desired output current. This can be set during diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 89bd2faaef8c..ce89f7848a57 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -24,18 +24,6 @@ static int power_state_active_cnt; /* will initialize to zero */ static DEFINE_SPINLOCK(power_state_active_lock); -int power_state_active_get(void) -{ - unsigned long flags; - int cnt; - - spin_lock_irqsave(&power_state_active_lock, flags); - cnt = power_state_active_cnt; - spin_unlock_irqrestore(&power_state_active_lock, flags); - - return cnt; -} - void power_state_active_enable(void) { unsigned long flags; @@ -65,6 +53,18 @@ out: #ifdef CONFIG_REGULATOR_DEBUG +static int power_state_active_get(void) +{ + unsigned long flags; + int cnt; + + spin_lock_irqsave(&power_state_active_lock, flags); + cnt = power_state_active_cnt; + spin_unlock_irqrestore(&power_state_active_lock, flags); + + return cnt; +} + static struct ux500_regulator_debug { struct dentry *dir; struct dentry *status_file; diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 92ceed0fc65e..3ae44ac12a94 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -840,7 +840,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) break; } - if ((id == PALMAS_REG_SMPS6) && (id == PALMAS_REG_SMPS8)) + if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8)) ramp_delay_support = true; if (ramp_delay_support) { @@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, - PALMAS_SMPS10_STATUS); + PALMAS_SMPS10_CTRL); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; pmic->desc[id].min_uV = 3750000; pmic->desc[id].uV_step = 1250000; |