diff options
| -rw-r--r-- | Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt | 34 | ||||
| -rw-r--r-- | include/dt-bindings/reset/hisi,hi6220-resets.h | 67 |
2 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt new file mode 100644 index 000000000000..e0b185a944ba --- /dev/null +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt @@ -0,0 +1,34 @@ +Hisilicon System Reset Controller +====================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +The reset controller registers are part of the system-ctl block on +hi6220 SoC. + +Required properties: +- compatible: may be "hisilicon,hi6220-sysctrl" +- reg: should be register base and length as documented in the + datasheet +- #reset-cells: 1, see below + +Example: +sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + #reset-cells = <1>; +}; + +Specifying reset lines connected to IP modules +============================================== +example: + + uart1: serial@..... { + ... + resets = <&sys_ctrl PERIPH_RSTEN3_UART1>; + ... + }; + +The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>. diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h new file mode 100644 index 000000000000..ca08a7e5248e --- /dev/null +++ b/include/dt-bindings/reset/hisi,hi6220-resets.h @@ -0,0 +1,67 @@ +/** + * This header provides index for the reset controller + * based on hi6220 SoC. + */ +#ifndef _DT_BINDINGS_RESET_CONTROLLER_HI6220 +#define _DT_BINDINGS_RESET_CONTROLLER_HI6220 + +#define PERIPH_RSTDIS0_MMC0 0x000 +#define PERIPH_RSTDIS0_MMC1 0x001 +#define PERIPH_RSTDIS0_MMC2 0x002 +#define PERIPH_RSTDIS0_NANDC 0x003 +#define PERIPH_RSTDIS0_USBOTG_BUS 0x004 +#define PERIPH_RSTDIS0_POR_PICOPHY 0x005 +#define PERIPH_RSTDIS0_USBOTG 0x006 +#define PERIPH_RSTDIS0_USBOTG_32K 0x007 +#define PERIPH_RSTDIS1_HIFI 0x100 +#define PERIPH_RSTDIS1_DIGACODEC 0x105 +#define PERIPH_RSTEN2_IPF 0x200 +#define PERIPH_RSTEN2_SOCP 0x201 +#define PERIPH_RSTEN2_DMAC 0x202 +#define PERIPH_RSTEN2_SECENG 0x203 +#define PERIPH_RSTEN2_ABB 0x204 +#define PERIPH_RSTEN2_HPM0 0x205 +#define PERIPH_RSTEN2_HPM1 0x206 +#define PERIPH_RSTEN2_HPM2 0x207 +#define PERIPH_RSTEN2_HPM3 0x208 +#define PERIPH_RSTEN3_CSSYS 0x300 +#define PERIPH_RSTEN3_I2C0 0x301 +#define PERIPH_RSTEN3_I2C1 0x302 +#define PERIPH_RSTEN3_I2C2 0x303 +#define PERIPH_RSTEN3_I2C3 0x304 +#define PERIPH_RSTEN3_UART1 0x305 +#define PERIPH_RSTEN3_UART2 0x306 +#define PERIPH_RSTEN3_UART3 0x307 +#define PERIPH_RSTEN3_UART4 0x308 +#define PERIPH_RSTEN3_SSP 0x309 +#define PERIPH_RSTEN3_PWM 0x30a +#define PERIPH_RSTEN3_BLPWM 0x30b +#define PERIPH_RSTEN3_TSENSOR 0x30c +#define PERIPH_RSTEN3_DAPB 0x312 +#define PERIPH_RSTEN3_HKADC 0x313 +#define PERIPH_RSTEN3_CODEC_SSI 0x314 +#define PERIPH_RSTEN3_PMUSSI1 0x316 +#define PERIPH_RSTEN8_RS0 0x400 +#define PERIPH_RSTEN8_RS2 0x401 +#define PERIPH_RSTEN8_RS3 0x402 +#define PERIPH_RSTEN8_MS0 0x403 +#define PERIPH_RSTEN8_MS2 0x405 +#define PERIPH_RSTEN8_XG2RAM0 0x406 +#define PERIPH_RSTEN8_X2SRAM_TZMA 0x407 +#define PERIPH_RSTEN8_SRAM 0x408 +#define PERIPH_RSTEN8_HARQ 0x40a +#define PERIPH_RSTEN8_DDRC 0x40c +#define PERIPH_RSTEN8_DDRC_APB 0x40d +#define PERIPH_RSTEN8_DDRPACK_APB 0x40e +#define PERIPH_RSTEN8_DDRT 0x411 +#define PERIPH_RSDIST9_CARM_DAP 0x500 +#define PERIPH_RSDIST9_CARM_ATB 0x501 +#define PERIPH_RSDIST9_CARM_LBUS 0x502 +#define PERIPH_RSDIST9_CARM_POR 0x503 +#define PERIPH_RSDIST9_CARM_CORE 0x504 +#define PERIPH_RSDIST9_CARM_DBG 0x505 +#define PERIPH_RSDIST9_CARM_L2 0x506 +#define PERIPH_RSDIST9_CARM_SOCDBG 0x507 +#define PERIPH_RSDIST9_CARM_ETM 0x508 + +#endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/ |