diff options
29 files changed, 419 insertions, 47 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 7048c03490d9..fb5805745ace 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -57,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -140,6 +141,7 @@ config SH_RSK bool "Renesas Starter Kit" depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. @@ -159,6 +161,7 @@ config SH_SDK7786 select NO_IOPORT if !PCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_SRAM_POOL + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -173,6 +176,7 @@ config SH_SH7757LCR bool "SH7757LCR" depends on CPU_SUBTYPE_SH7757 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config SH_SH7785LCR bool "SH7785LCR" @@ -206,6 +210,7 @@ config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -214,6 +219,7 @@ config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -222,6 +228,7 @@ config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. @@ -230,6 +237,7 @@ config SH_ECOVEC depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_DA7210 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -305,6 +313,7 @@ config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -316,6 +325,7 @@ config SH_CAYMAN config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board @@ -323,6 +333,7 @@ config SH_POLARIS config SH_SH2007 bool "SH-2007 board" select NO_IOPORT + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7780 help SH-2007 is a single-board computer based around SH7780 chip @@ -334,6 +345,7 @@ config SH_SH2007 config SH_APSH4A3A bool "AP-SH4A-3A" select SH_ALPHA_BOARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7785 help Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. @@ -342,6 +354,7 @@ config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD select SYS_SUPPORTS_PCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c index 2823619c6006..0a39c241628a 100644 --- a/arch/sh/boards/board-apsh4a3a.c +++ b/arch/sh/boards/board-apsh4a3a.c @@ -13,6 +13,8 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> @@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = { .resource = nor_flash_resources, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = { static int __init apsh4a3a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4a3a_devices, ARRAY_SIZE(apsh4a3a_devices)); } diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c index b4d6292a9247..92eac3a99187 100644 --- a/arch/sh/boards/board-apsh4ad0a.c +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -12,12 +12,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> #include <asm/machvec.h> #include <asm/sizes.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = { static int __init apsh4ad0a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4ad0a_devices, ARRAY_SIZE(apsh4ad0a_devices)); } diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 90568f9de3a4..20500858b56c 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,6 +14,8 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -24,6 +26,12 @@ #include <asm/heartbeat.h> #include <cpu/sh7720.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ @@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 0978ae2e4847..37a08d094727 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -9,6 +9,8 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <asm/irq.h> @@ -22,6 +24,12 @@ #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -88,6 +96,8 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c index b90b78f6a829..1980bb7e5780 100644 --- a/arch/sh/boards/board-sh2007.c +++ b/arch/sh/boards/board-sh2007.c @@ -6,6 +6,8 @@ */ #include <linux/init.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> @@ -13,6 +15,14 @@ #include <asm/machvec.h> #include <mach/sh2007.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + struct smsc911x_platform_config smc911x_info = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = { static int __init sh2007_io_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); return 0; } diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 5087f8bb4cff..41f86702eb9f 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -12,6 +12,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/io.h> @@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = { static int __init sh7757lcr_devices_setup(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* RGMII (PTA) */ gpio_request(GPIO_FN_ET0_MDC, NULL); gpio_request(GPIO_FN_ET0_MDIO, NULL); diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index f33ebf447073..9e963c1d1447 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -20,6 +20,8 @@ #include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/videodev2.h> @@ -34,6 +36,12 @@ #include <asm/suspend.h> #include <cpu/sh7723.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -423,6 +431,15 @@ static struct platform_device ceu_device = { }, }; +/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", @@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void) &ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 4158d70c0dea..64559e8af14b 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> @@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev) return gpio_get_value(GPIO_PTB3); } +static void usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); +} + static struct renesas_usbhs_platform_info usbhs_info = { .platform_callback = { .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, }, .driver_param = { .buswait_bwait = 4, @@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +static struct regulator_consumer_supply cn12_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; + static void sdhi0_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB6, NULL); + if (!ret) { + power_gpio = GPIO_PTB6; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB6, state); } @@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) +static void cn12_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB7, NULL); + if (!ret) { + power_gpio = GPIO_PTB7; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB7, state); } +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static int sdhi1_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PTW7); @@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .set_pwr = sdhi1_set_pwr, + .set_pwr = cn12_set_pwr, .get_cd = sdhi1_get_cd, }; @@ -899,14 +999,9 @@ static struct platform_device vou_device = { #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SH_MMCIF */ -static void mmcif_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - static void mmcif_down_pwr(struct platform_device *pdev) { - gpio_set_value(GPIO_PTB7, 0); + cn12_set_pwr(pdev, 0); } static struct resource sh_mmcif_resources[] = { @@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_plat_data sh_mmcif_plat = { - .set_pwr = mmcif_set_pwr, + .set_pwr = cn12_set_pwr, .down_pwr = mmcif_down_pwr, .sup_pclk = 0, /* SH7724: Max Pclk/2 */ .caps = MMC_CAP_4_BIT_DATA | @@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -1258,8 +1355,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1288,8 +1383,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); cn12_enabled = true; #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1301,8 +1394,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); /* Card-detect, used on CN12 with SDHI1 */ gpio_request(GPIO_PTW7, NULL); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 43a179ce9afc..f2a4304fbe23 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -21,6 +21,8 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/videodev2.h> #include <linux/sh_intc.h> @@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index a8a1ca741c85..8b73194ed2ce 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -17,6 +17,8 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/delay.h> #include <linux/clk.h> @@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", @@ -498,6 +507,10 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index 895f030070d3..2685ea03b064 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -16,9 +16,17 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/machvec.h> #include <asm/io.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition rsk_partitions[] = { @@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = { static int __init rsk_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(rsk_devices, ARRAY_SIZE(rsk_devices)); } diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 27a2314f50ac..c29268bfd34a 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/i2c.h> #include <linux/irq.h> @@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = { .resource = &heartbeat_resource, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p) { pr_info("Renesas Technology Europe SDK7786 support:\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sdk7786_fpga_init(); sdk7786_nmi_init(); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index ffbf5bc7366b..35f6efa3ac0e 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -18,6 +18,8 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> @@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", @@ -684,6 +695,10 @@ static int __init devices_setup(void) &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Reset Release */ fpga_out = __raw_readw(FPGA_OUT); /* bit4: NTSC_PDN, bit5: NTSC_RESET */ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h index 41f9f8b9db73..5340f3bc1863 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7757.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h @@ -283,5 +283,7 @@ enum { SHDMA_SLAVE_RIIC8_RX, SHDMA_SLAVE_RIIC9_TX, SHDMA_SLAVE_RIIC9_RX, + SHDMA_SLAVE_RSPI_TX, + SHDMA_SLAVE_RSPI_RX, }; #endif /* __ASM_SH7757_H__ */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index c87e78f73234..5f30f805d2f2 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -334,8 +334,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]), CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]), CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]), - CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]), - CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]), + CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]), + CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]), CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 65786c7f5ded..6a868b091c2d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <linux/uio_driver.h> diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index a7708425afa9..4a2f357f4df8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -216,6 +216,20 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, + { + .slave_id = SHDMA_SLAVE_RSPI_TX, + .addr = 0xfe480004, + .chcr = SM_INC | 0x800 | 0x40000000 | + TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, + { + .slave_id = SHDMA_SLAVE_RSPI_RX, + .addr = 0xfe480004, + .chcr = DM_INC | 0x800 | 0x40000000 | + TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, }; static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 1fc25d85e515..3bdc1ad9a341 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -58,11 +58,15 @@ static void show_pte(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; - if (mm) + if (mm) { pgd = mm->pgd; - else + } else { pgd = get_TTB(); + if (unlikely(!pgd)) + pgd = swapper_pg_dir; + } + printk(KERN_ALERT "pgd = %p\n", pgd); pgd += pgd_index(addr); printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr, diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c index 27f5c781fd73..f4cd946d259d 100644 --- a/drivers/dma/sh/shdma-base.c +++ b/drivers/dma/sh/shdma-base.c @@ -483,6 +483,7 @@ static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan, new->mark = DESC_PREPARED; new->async_tx.flags = flags; new->direction = direction; + new->partial = 0; *len -= copy_size; if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV) @@ -644,6 +645,14 @@ static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, case DMA_TERMINATE_ALL: spin_lock_irqsave(&schan->chan_lock, flags); ops->halt_channel(schan); + + if (ops->get_partial && !list_empty(&schan->ld_queue)) { + /* Record partial transfer */ + struct shdma_desc *desc = list_first_entry(&schan->ld_queue, + struct shdma_desc, node); + desc->partial = ops->get_partial(schan, desc); + } + spin_unlock_irqrestore(&schan->chan_lock, flags); shdma_chan_ld_cleanup(schan, true); diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c index 027c9be97654..f41bcc5267fd 100644 --- a/drivers/dma/sh/shdma.c +++ b/drivers/dma/sh/shdma.c @@ -381,6 +381,17 @@ static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq) return true; } +static size_t sh_dmae_get_partial(struct shdma_chan *schan, + struct shdma_desc *sdesc) +{ + struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan, + shdma_chan); + struct sh_dmae_desc *sh_desc = container_of(sdesc, + struct sh_dmae_desc, shdma_desc); + return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) << + sh_chan->xmit_shift; +} + /* Called from error IRQ or NMI */ static bool sh_dmae_reset(struct sh_dmae_device *shdev) { @@ -632,6 +643,7 @@ static const struct shdma_ops sh_dmae_shdma_ops = { .start_xfer = sh_dmae_start_xfer, .embedded_desc = sh_dmae_embedded_desc, .chan_irq = sh_dmae_chan_irq, + .get_partial = sh_dmae_get_partial, }; static int __devinit sh_dmae_probe(struct platform_device *pdev) diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig index c88cbccc62b0..a305731742a9 100644 --- a/drivers/sh/intc/Kconfig +++ b/drivers/sh/intc/Kconfig @@ -1,3 +1,7 @@ +config SH_INTC + def_bool y + select IRQ_DOMAIN + comment "Interrupt controller options" config INTC_USERIMASK diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile index 44f006d09471..54ec2a0643df 100644 --- a/drivers/sh/intc/Makefile +++ b/drivers/sh/intc/Makefile @@ -1,4 +1,4 @@ -obj-y := access.o chip.o core.o handle.o virq.o +obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o obj-$(CONFIG_INTC_BALANCING) += balancing.o obj-$(CONFIG_INTC_USERIMASK) += userimask.o diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index 7e562ccb6997..2374468615ed 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -25,6 +25,7 @@ #include <linux/stat.h> #include <linux/interrupt.h> #include <linux/sh_intc.h> +#include <linux/irqdomain.h> #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/list.h> @@ -310,6 +311,8 @@ int __init register_intc_controller(struct intc_desc *desc) BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ + intc_irq_domain_init(d, hw); + /* register the vectors one by one */ for (i = 0; i < hw->nr_vectors; i++) { struct intc_vect *vect = hw->vectors + i; @@ -319,8 +322,8 @@ int __init register_intc_controller(struct intc_desc *desc) if (!vect->enum_id) continue; - res = irq_alloc_desc_at(irq, numa_node_id()); - if (res != irq && res != -EEXIST) { + res = irq_create_identity_mapping(d->domain, irq); + if (unlikely(res)) { pr_err("can't get irq_desc for %d\n", irq); continue; } @@ -340,8 +343,8 @@ int __init register_intc_controller(struct intc_desc *desc) * IRQ support, each vector still needs to have * its own backing irq_desc. */ - res = irq_alloc_desc_at(irq2, numa_node_id()); - if (res != irq2 && res != -EEXIST) { + res = irq_create_identity_mapping(d->domain, irq2); + if (unlikely(res)) { pr_err("can't get irq_desc for %d\n", irq2); continue; } diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h index f034a979a16f..7dff08e2a071 100644 --- a/drivers/sh/intc/internals.h +++ b/drivers/sh/intc/internals.h @@ -1,5 +1,6 @@ #include <linux/sh_intc.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/list.h> #include <linux/kernel.h> #include <linux/types.h> @@ -66,6 +67,7 @@ struct intc_desc_int { unsigned int nr_sense; struct intc_window *window; unsigned int nr_windows; + struct irq_domain *domain; struct irq_chip chip; bool skip_suspend; }; @@ -187,6 +189,9 @@ unsigned long intc_get_ack_handle(unsigned int irq); void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id, int enable); +/* irqdomain.c */ +void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw); + /* virq.c */ void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d); void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d); diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c new file mode 100644 index 000000000000..3968f1c3c5c3 --- /dev/null +++ b/drivers/sh/intc/irqdomain.c @@ -0,0 +1,68 @@ +/* + * IRQ domain support for SH INTC subsystem + * + * Copyright (C) 2012 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) "intc: " fmt + +#include <linux/irqdomain.h> +#include <linux/sh_intc.h> +#include <linux/export.h> +#include "internals.h" + +/** + * intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs. + * + * This takes care of exception vector to hwirq translation through + * by way of evt2irq() translation. + * + * Note: For platforms that use a flat vector space without INTEVT this + * basically just mimics irq_domain_xlate_onecell() by way of a nopped + * out evt2irq() implementation. + */ +static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize < 1)) + return -EINVAL; + + *out_hwirq = evt2irq(intspec[0]); + *out_type = IRQ_TYPE_NONE; + + return 0; +} + +static const struct irq_domain_ops intc_evt_ops = { + .xlate = intc_evt_xlate, +}; + +void __init intc_irq_domain_init(struct intc_desc_int *d, + struct intc_hw_desc *hw) +{ + unsigned int irq_base, irq_end; + + /* + * Quick linear revmap check + */ + irq_base = evt2irq(hw->vectors[0].vect); + irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect); + + /* + * Linear domains have a hard-wired assertion that IRQs start at + * 0 in order to make some performance optimizations. Lamely + * restrict the linear case to these conditions here, taking the + * tree penalty for linear cases with non-zero hwirq bases. + */ + if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1)) + d->domain = irq_domain_add_linear(NULL, hw->nr_vectors, + &intc_evt_ops, NULL); + else + d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL); + + BUG_ON(!d->domain); +} diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c index 0802b6c0d653..2804eaae804e 100644 --- a/drivers/sh/pfc/pinctrl.c +++ b/drivers/sh/pfc/pinctrl.c @@ -276,7 +276,6 @@ static int sh_pfc_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, unsigned long config) { struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev); - struct sh_pfc *pfc = pmx->pfc; /* Validate the new type */ if (config >= PINMUX_FLAG_TYPE) @@ -326,20 +325,6 @@ static struct pinctrl_desc sh_pfc_pinctrl_desc = { .confops = &sh_pfc_pinconf_ops, }; -int sh_pfc_register_pinctrl(struct sh_pfc *pfc) -{ - sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL); - if (unlikely(!sh_pfc_pmx)) - return -ENOMEM; - - spin_lock_init(&sh_pfc_pmx->lock); - - sh_pfc_pmx->pfc = pfc; - - return 0; -} -EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl); - static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx, struct pinmux_gpio *gpio, @@ -481,7 +466,6 @@ static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev) { struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev); - pinctrl_remove_gpio_range(pmx->pctl, &sh_pfc_gpio_range); pinctrl_unregister(pmx->pctl); platform_set_drvdata(pdev, NULL); @@ -507,7 +491,7 @@ static struct platform_device sh_pfc_pinctrl_device = { .id = -1, }; -static int __init sh_pfc_pinctrl_init(void) +static int sh_pfc_pinctrl_init(void) { int rc; @@ -521,10 +505,22 @@ static int __init sh_pfc_pinctrl_init(void) return rc; } +int sh_pfc_register_pinctrl(struct sh_pfc *pfc) +{ + sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL); + if (unlikely(!sh_pfc_pmx)) + return -ENOMEM; + + spin_lock_init(&sh_pfc_pmx->lock); + + sh_pfc_pmx->pfc = pfc; + + return sh_pfc_pinctrl_init(); +} +EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl); + static void __exit sh_pfc_pinctrl_exit(void) { platform_driver_unregister(&sh_pfc_pinctrl_driver); } - -subsys_initcall(sh_pfc_pinctrl_init); module_exit(sh_pfc_pinctrl_exit); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d4d8c9453cd8..9be296cf7295 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/errno.h> +#include <linux/sh_dma.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/tty.h> @@ -1410,8 +1411,8 @@ static void work_fn_rx(struct work_struct *work) /* Handle incomplete DMA receive */ struct tty_struct *tty = port->state->port.tty; struct dma_chan *chan = s->chan_rx; - struct sh_desc *sh_desc = container_of(desc, struct sh_desc, - async_tx); + struct shdma_desc *sh_desc = container_of(desc, + struct shdma_desc, async_tx); unsigned long flags; int count; diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index 93f9821554b6..a3728bf66f0e 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -50,6 +50,7 @@ struct shdma_desc { struct list_head node; struct dma_async_tx_descriptor async_tx; enum dma_transfer_direction direction; + size_t partial; dma_cookie_t cookie; int chunks; int mark; @@ -98,6 +99,7 @@ struct shdma_ops { void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); struct shdma_desc *(*embedded_desc)(void *, int); bool (*chan_irq)(struct shdma_chan *, int); + size_t (*get_partial)(struct shdma_chan *, struct shdma_desc *); }; struct shdma_dev { |