aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt55
-rw-r--r--Documentation/devicetree/bindings/ata/faraday,ftide010.txt38
-rw-r--r--MAINTAINERS9
-rw-r--r--drivers/ata/Kconfig21
-rw-r--r--drivers/ata/Makefile2
-rw-r--r--drivers/ata/ahci.c2
-rw-r--r--drivers/ata/ahci.h3
-rw-r--r--drivers/ata/ahci_brcm.c12
-rw-r--r--drivers/ata/ahci_qoriq.c14
-rw-r--r--drivers/ata/libahci.c12
-rw-r--r--drivers/ata/libata-core.c214
-rw-r--r--drivers/ata/libata-eh.c64
-rw-r--r--drivers/ata/libata-scsi.c193
-rw-r--r--drivers/ata/libata-sff.c44
-rw-r--r--drivers/ata/libata.h4
-rw-r--r--drivers/ata/pata_bf54x.c2
-rw-r--r--drivers/ata/pata_ep93xx.c1
-rw-r--r--drivers/ata/pata_ftide010.c567
-rw-r--r--drivers/ata/pata_octeon_cf.c2
-rw-r--r--drivers/ata/pata_rb532_cf.c2
-rw-r--r--drivers/ata/pata_rdc.c2
-rw-r--r--drivers/ata/pata_samsung_cf.c2
-rw-r--r--drivers/ata/pata_sch.c2
-rw-r--r--drivers/ata/sata_dwc_460ex.c1
-rw-r--r--drivers/ata/sata_fsl.c2
-rw-r--r--drivers/ata/sata_gemini.c438
-rw-r--r--drivers/ata/sata_gemini.h21
-rw-r--r--drivers/ata/sata_inic162x.c2
-rw-r--r--drivers/ata/sata_rcar.c2
-rw-r--r--drivers/ata/sata_via.c23
-rw-r--r--drivers/scsi/sd.c53
-rw-r--r--drivers/scsi/sd.h2
-rw-r--r--include/linux/ata.h11
-rw-r--r--include/linux/libata.h1
-rw-r--r--include/scsi/scsi_device.h1
-rw-r--r--include/scsi/scsi_proto.h1
36 files changed, 1589 insertions, 236 deletions
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
new file mode 100644
index 000000000000..1c3d3cc70051
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
@@ -0,0 +1,55 @@
+* Cortina Systems Gemini SATA Bridge
+
+The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+takes two Faraday Technology FTIDE010 PATA controllers and bridges
+them in different configurations to two SATA ports.
+
+Required properties:
+- compatible: should be
+ "cortina,gemini-sata-bridge"
+- reg: registers and size for the block
+- resets: phandles to the reset lines for both SATA bridges
+- reset-names: must be "sata0", "sata1"
+- clocks: phandles to the compulsory peripheral clocks
+- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
+- syscon: a phandle to the global Gemini system controller
+- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
+ the ATA controller and SATA bridges. Values 0..3:
+ Mode 0: ata0 master <-> sata0
+ ata1 master <-> sata1
+ ata0 slave interface brought out on IDE pads
+ Mode 1: ata0 master <-> sata0
+ ata1 master <-> sata1
+ ata1 slave interface brought out on IDE pads
+ Mode 2: ata1 master <-> sata1
+ ata1 slave <-> sata0
+ ata0 master and slave interfaces brought out
+ on IDE pads
+ Mode 3: ata0 master <-> sata0
+ ata0 slave <-> sata1
+ ata1 master and slave interfaces brought out
+ on IDE pads
+
+Optional boolean properties:
+- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
+ The muxmode setting decides whether ATA0 or ATA1 is brought out,
+ and whether master, slave or both interfaces get brought out.
+- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
+ inside the Gemnini SoC. The Muxmode decides what PATA blocks will
+ be muxed out and how.
+
+Example:
+
+sata: sata@46000000 {
+ compatible = "cortina,gemini-sata-bridge";
+ reg = <0x46000000 0x100>;
+ resets = <&rcon 26>, <&rcon 27>;
+ reset-names = "sata0", "sata1";
+ clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+ <&gcc GEMINI_CLK_GATE_SATA1>;
+ clock-names = "SATA0_PCLK", "SATA1_PCLK";
+ syscon = <&syscon>;
+ cortina,gemini-ata-muxmode = <3>;
+ cortina,gemini-enable-ide-pins;
+ cortina,gemini-enable-sata-bridge;
+};
diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt
new file mode 100644
index 000000000000..a0c64a29104d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt
@@ -0,0 +1,38 @@
+* Faraday Technology FTIDE010 PATA controller
+
+This controller is the first Faraday IDE interface block, used in the
+StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini
+platform. The controller can do PIO modes 0 through 4, Multi-word DMA
+(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6.
+
+On the Gemini platform, this PATA block is accompanied by a PATA to
+SATA bridge in order to support SATA. This is why a phandle to that
+controller is compulsory on that platform.
+
+The timing properties are unique per-SoC, not per-board.
+
+Required properties:
+- compatible: should be one of
+ "cortina,gemini-pata", "faraday,ftide010"
+ "faraday,ftide010"
+- interrupts: interrupt for the block
+- reg: registers and size for the block
+
+Optional properties:
+- clocks: a SoC clock running the peripheral.
+- clock-names: should be set to "PCLK" for the peripheral clock.
+
+Required properties for "cortina,gemini-pata" compatible:
+- sata: a phande to the Gemini PATA to SATA bridge, see
+ cortina,gemini-sata-bridge.txt for details.
+
+Example:
+
+ata@63000000 {
+ compatible = "cortina,gemini-pata", "faraday,ftide010";
+ reg = <0x63000000 0x100>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+ clock-names = "PCLK";
+ sata = <&sata>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index b73dddde6455..6ff7aa451513 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7593,6 +7593,15 @@ S: Maintained
F: drivers/ata/pata_*.c
F: drivers/ata/ata_generic.c
+LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS
+M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: drivers/ata/pata_ftide010.c
+F: drivers/ata/sata_gemini.c
+F: drivers/ata/sata_gemini.h
+
LIBATA SATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index de3eaf051697..948fc86980a1 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -213,6 +213,16 @@ config SATA_FSL
If unsure, say N.
+config SATA_GEMINI
+ tristate "Gemini SATA bridge support"
+ depends on PATA_FTIDE010
+ default ARCH_GEMINI
+ help
+ This enabled support for the FTIDE010 to SATA bridge
+ found in Cortina Systems Gemini platform.
+
+ If unsure, say N.
+
config SATA_AHCI_SEATTLE
tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
depends on ARCH_SEATTLE
@@ -599,6 +609,17 @@ config PATA_EP93XX
If unsure, say N.
+config PATA_FTIDE010
+ tristate "Faraday Technology FTIDE010 PATA support"
+ depends on OF
+ depends on ARM
+ default ARCH_GEMINI
+ help
+ This option enables support for the Faraday FTIDE010
+ PATA controller found in the Cortina Gemini SoCs.
+
+ If unsure, say N.
+
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index cd931a5eba92..a26ef5a93919 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
+obj-$(CONFIG_SATA_GEMINI) += sata_gemini.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_PATA_CS5536) += pata_cs5536.o
obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o
obj-$(CONFIG_PATA_EFAR) += pata_efar.o
obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o
+obj-$(CONFIG_PATA_FTIDE010) += pata_ftide010.o
obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 1e1c355121e4..5a5fd0b404eb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -548,6 +548,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */
{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
+ { PCI_VDEVICE(ASMEDIA, 0x0621), board_ahci }, /* ASM1061R */
+ { PCI_VDEVICE(ASMEDIA, 0x0622), board_ahci }, /* ASM1062R */
/*
* Samsung SSDs found on some macbooks. NCQ times out if MSI is
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 30f67a1a4f54..8b61123d2c3c 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -248,6 +248,9 @@ enum {
AHCI_HFLAG_MULTI_MSI = 0,
#endif
AHCI_HFLAG_WAKE_BEFORE_STOP = (1 << 22), /* wake before DMA stop */
+ AHCI_HFLAG_YES_ALPM = (1 << 23), /* force ALPM cap on */
+ AHCI_HFLAG_NO_WRITE_TO_RO = (1 << 24), /* don't write to read
+ only registers */
/* ap->flags bits */
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 6f8a7341fa08..5936d1679bf3 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -39,7 +39,6 @@
#define PIODATA_ENDIAN_SHIFT 6
#define ENDIAN_SWAP_NONE 0
#define ENDIAN_SWAP_FULL 2
- #define OVERRIDE_HWINIT BIT(16)
#define SATA_TOP_CTRL_TP_CTRL 0x8
#define SATA_TOP_CTRL_PHY_CTRL 0xc
#define SATA_TOP_CTRL_PHY_CTRL_1 0x0
@@ -126,17 +125,13 @@ static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
{
struct brcm_ahci_priv *priv = hpriv->plat_data;
- u32 bus_ctrl, port_ctrl, host_caps;
+ u32 port_ctrl, host_caps;
int i;
/* Enable support for ALPM */
- bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
- SATA_TOP_CTRL_BUS_CTRL);
- brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
- priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
host_caps = readl(hpriv->mmio + HOST_CAP);
- writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
- brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+ if (!(host_caps & HOST_CAP_ALPM))
+ hpriv->flags |= AHCI_HFLAG_YES_ALPM;
/*
* Adjust timeout to allow PLL sufficient time to lock while waking
@@ -360,6 +355,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
hpriv->flags |= AHCI_HFLAG_NO_NCQ;
+ hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
&ahci_platform_sht);
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 4c96f3ac4976..b6b0bf76dfc7 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -47,12 +47,14 @@
#define SATA_ECC_DISABLE 0x00020000
#define ECC_DIS_ARMV8_CH2 0x80000000
+#define ECC_DIS_LS1088A 0x40000000
enum ahci_qoriq_type {
AHCI_LS1021A,
AHCI_LS1043A,
AHCI_LS2080A,
AHCI_LS1046A,
+ AHCI_LS1088A,
AHCI_LS2088A,
};
@@ -68,6 +70,7 @@ static const struct of_device_id ahci_qoriq_of_match[] = {
{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+ { .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
{},
};
@@ -203,6 +206,17 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
break;
+ case AHCI_LS1088A:
+ if (!qpriv->ecc_addr)
+ return -EINVAL;
+ writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
+ qpriv->ecc_addr);
+ writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+ if (qpriv->is_dmacoherent)
+ writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+ break;
+
case AHCI_LS2088A:
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 6154f0e2b81a..3e286d86ab42 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -504,6 +504,11 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
cap &= ~HOST_CAP_FBS;
}
+ if (!(cap & HOST_CAP_ALPM) && (hpriv->flags & AHCI_HFLAG_YES_ALPM)) {
+ dev_info(dev, "controller can do ALPM, turning on CAP_ALPM\n");
+ cap |= HOST_CAP_ALPM;
+ }
+
if (hpriv->force_port_map && port_map != hpriv->force_port_map) {
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, hpriv->force_port_map);
@@ -940,7 +945,8 @@ int ahci_reset_controller(struct ata_host *host)
/* Some registers might be cleared on reset. Restore
* initial values.
*/
- ahci_restore_initial_config(host);
+ if (!(hpriv->flags & AHCI_HFLAG_NO_WRITE_TO_RO))
+ ahci_restore_initial_config(host);
} else
dev_info(host->dev, "skipping global host reset\n");
@@ -1400,7 +1406,7 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
ata_tf_init(link->device, &tf);
- /* issue the first D2H Register FIS */
+ /* issue the first H2D Register FIS */
msecs = 0;
now = jiffies;
if (time_after(deadline, now))
@@ -1417,7 +1423,7 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
/* spec says at least 5us, but be generous and sleep for 1ms */
ata_msleep(ap, 1);
- /* issue the second D2H Register FIS */
+ /* issue the second H2D Register FIS */
tf.ctl &= ~ATA_SRST;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b82d6bb88d27..8453f9a4682f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2047,6 +2047,110 @@ retry:
return rc;
}
+/**
+ * ata_read_log_page - read a specific log page
+ * @dev: target device
+ * @log: log to read
+ * @page: page to read
+ * @buf: buffer to store read page
+ * @sectors: number of sectors to read
+ *
+ * Read log page using READ_LOG_EXT command.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, AC_ERR_* mask otherwise.
+ */
+unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
+ u8 page, void *buf, unsigned int sectors)
+{
+ unsigned long ap_flags = dev->link->ap->flags;
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+ bool dma = false;
+
+ DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
+
+ /*
+ * Return error without actually issuing the command on controllers
+ * which e.g. lockup on a read log page.
+ */
+ if (ap_flags & ATA_FLAG_NO_LOG_PAGE)
+ return AC_ERR_DEV;
+
+retry:
+ ata_tf_init(dev, &tf);
+ if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
+ !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) {
+ tf.command = ATA_CMD_READ_LOG_DMA_EXT;
+ tf.protocol = ATA_PROT_DMA;
+ dma = true;
+ } else {
+ tf.command = ATA_CMD_READ_LOG_EXT;
+ tf.protocol = ATA_PROT_PIO;
+ dma = false;
+ }
+ tf.lbal = log;
+ tf.lbam = page;
+ tf.nsect = sectors;
+ tf.hob_nsect = sectors >> 8;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
+ buf, sectors * ATA_SECT_SIZE, 0);
+
+ if (err_mask && dma) {
+ dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG;
+ ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n");
+ goto retry;
+ }
+
+ DPRINTK("EXIT, err_mask=%x\n", err_mask);
+ return err_mask;
+}
+
+static bool ata_log_supported(struct ata_device *dev, u8 log)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ if (ata_read_log_page(dev, ATA_LOG_DIRECTORY, 0, ap->sector_buf, 1))
+ return false;
+ return get_unaligned_le16(&ap->sector_buf[log * 2]) ? true : false;
+}
+
+static bool ata_identify_page_supported(struct ata_device *dev, u8 page)
+{
+ struct ata_port *ap = dev->link->ap;
+ unsigned int err, i;
+
+ if (!ata_log_supported(dev, ATA_LOG_IDENTIFY_DEVICE)) {
+ ata_dev_warn(dev, "ATA Identify Device Log not supported\n");
+ return false;
+ }
+
+ /*
+ * Read IDENTIFY DEVICE data log, page 0, to figure out if the page is
+ * supported.
+ */
+ err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, 0, ap->sector_buf,
+ 1);
+ if (err) {
+ ata_dev_info(dev,
+ "failed to get Device Identify Log Emask 0x%x\n",
+ err);
+ return false;
+ }
+
+ for (i = 0; i < ap->sector_buf[8]; i++) {
+ if (ap->sector_buf[9 + i] == page)
+ return true;
+ }
+
+ return false;
+}
+
static int ata_do_link_spd_horkage(struct ata_device *dev)
{
struct ata_link *plink = ata_dev_phys_link(dev);
@@ -2094,21 +2198,9 @@ static void ata_dev_config_ncq_send_recv(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
unsigned int err_mask;
- int log_index = ATA_LOG_NCQ_SEND_RECV * 2;
- u16 log_pages;
- err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY,
- 0, ap->sector_buf, 1);
- if (err_mask) {
- ata_dev_dbg(dev,
- "failed to get Log Directory Emask 0x%x\n",
- err_mask);
- return;
- }
- log_pages = get_unaligned_le16(&ap->sector_buf[log_index]);
- if (!log_pages) {
- ata_dev_warn(dev,
- "NCQ Send/Recv Log not supported\n");
+ if (!ata_log_supported(dev, ATA_LOG_NCQ_SEND_RECV)) {
+ ata_dev_warn(dev, "NCQ Send/Recv Log not supported\n");
return;
}
err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
@@ -2135,19 +2227,8 @@ static void ata_dev_config_ncq_non_data(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
unsigned int err_mask;
- int log_index = ATA_LOG_NCQ_NON_DATA * 2;
- u16 log_pages;
- err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY,
- 0, ap->sector_buf, 1);
- if (err_mask) {
- ata_dev_dbg(dev,
- "failed to get Log Directory Emask 0x%x\n",
- err_mask);
- return;
- }
- log_pages = get_unaligned_le16(&ap->sector_buf[log_index]);
- if (!log_pages) {
+ if (!ata_log_supported(dev, ATA_LOG_NCQ_NON_DATA)) {
ata_dev_warn(dev,
"NCQ Send/Recv Log not supported\n");
return;
@@ -2176,7 +2257,7 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
}
err_mask = ata_read_log_page(dev,
- ATA_LOG_SATA_ID_DEV_DATA,
+ ATA_LOG_IDENTIFY_DEVICE,
ATA_LOG_SATA_SETTINGS,
ap->sector_buf,
1);
@@ -2275,8 +2356,6 @@ static void ata_dev_config_zac(struct ata_device *dev)
struct ata_port *ap = dev->link->ap;
unsigned int err_mask;
u8 *identify_buf = ap->sector_buf;
- int log_index = ATA_LOG_SATA_ID_DEV_DATA * 2, i, found = 0;
- u16 log_pages;
dev->zac_zones_optimal_open = U32_MAX;
dev->zac_zones_optimal_nonseq = U32_MAX;
@@ -2296,44 +2375,7 @@ static void ata_dev_config_zac(struct ata_device *dev)
if (!(dev->flags & ATA_DFLAG_ZAC))
return;
- /*
- * Read Log Directory to figure out if IDENTIFY DEVICE log
- * is supported.
- */
- err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY,
- 0, ap->sector_buf, 1);
- if (err_mask) {
- ata_dev_info(dev,
- "failed to get Log Directory Emask 0x%x\n",
- err_mask);
- return;
- }
- log_pages = get_unaligned_le16(&ap->sector_buf[log_index]);
- if (log_pages == 0) {
- ata_dev_warn(dev,
- "ATA Identify Device Log not supported\n");
- return;
- }
- /*
- * Read IDENTIFY DEVICE data log, page 0, to figure out
- * if page 9 is supported.
- */
- err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, 0,
- identify_buf, 1);
- if (err_mask) {
- ata_dev_info(dev,
- "failed to get Device Identify Log Emask 0x%x\n",
- err_mask);
- return;
- }
- log_pages = identify_buf[8];
- for (i = 0; i < log_pages; i++) {
- if (identify_buf[9 + i] == ATA_LOG_ZONED_INFORMATION) {
- found++;
- break;
- }
- }
- if (!found) {
+ if (!ata_identify_page_supported(dev, ATA_LOG_ZONED_INFORMATION)) {
ata_dev_warn(dev,
"ATA Zoned Information Log not supported\n");
return;
@@ -2342,7 +2384,7 @@ static void ata_dev_config_zac(struct ata_device *dev)
/*
* Read IDENTIFY DEVICE data log, page 9 (Zoned-device information)
*/
- err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA,
+ err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE,
ATA_LOG_ZONED_INFORMATION,
identify_buf, 1);
if (!err_mask) {
@@ -2363,6 +2405,37 @@ static void ata_dev_config_zac(struct ata_device *dev)
}
}
+static void ata_dev_config_trusted(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+ u64 trusted_cap;
+ unsigned int err;
+
+ if (!ata_identify_page_supported(dev, ATA_LOG_SECURITY)) {
+ ata_dev_warn(dev,
+ "Security Log not supported\n");
+ return;
+ }
+
+ err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, ATA_LOG_SECURITY,
+ ap->sector_buf, 1);
+ if (err) {
+ ata_dev_dbg(dev,
+ "failed to read Security Log, Emask 0x%x\n", err);
+ return;
+ }
+
+ trusted_cap = get_unaligned_le64(&ap->sector_buf[40]);
+ if (!(trusted_cap & (1ULL << 63))) {
+ ata_dev_dbg(dev,
+ "Trusted Computing capability qword not valid!\n");
+ return;
+ }
+
+ if (trusted_cap & (1 << 0))
+ dev->flags |= ATA_DFLAG_TRUSTED;
+}
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -2571,7 +2644,7 @@ int ata_dev_configure(struct ata_device *dev)
dev->flags |= ATA_DFLAG_DEVSLP;
err_mask = ata_read_log_page(dev,
- ATA_LOG_SATA_ID_DEV_DATA,
+ ATA_LOG_IDENTIFY_DEVICE,
ATA_LOG_SATA_SETTINGS,
sata_setting,
1);
@@ -2587,7 +2660,8 @@ int ata_dev_configure(struct ata_device *dev)
}
ata_dev_config_sense_reporting(dev);
ata_dev_config_zac(dev);
- dev->cdb_len = 16;
+ ata_dev_config_trusted(dev);
+ dev->cdb_len = 32;
}
/* ATAPI-specific feature tests */
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7e33e200aae5..b70bcf6d2914 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1488,70 +1488,6 @@ static const char *ata_err_string(unsigned int err_mask)
}
/**
- * ata_read_log_page - read a specific log page
- * @dev: target device
- * @log: log to read
- * @page: page to read
- * @buf: buffer to store read page
- * @sectors: number of sectors to read
- *
- * Read log page using READ_LOG_EXT command.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, AC_ERR_* mask otherwise.
- */
-unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
- u8 page, void *buf, unsigned int sectors)
-{
- unsigned long ap_flags = dev->link->ap->flags;
- struct ata_taskfile tf;
- unsigned int err_mask;
- bool dma = false;
-
- DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
-
- /*
- * Return error without actually issuing the command on controllers
- * which e.g. lockup on a read log page.
- */
- if (ap_flags & ATA_FLAG_NO_LOG_PAGE)
- return AC_ERR_DEV;
-
-retry:
- ata_tf_init(dev, &tf);
- if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
- !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) {
- tf.command = ATA_CMD_READ_LOG_DMA_EXT;
- tf.protocol = ATA_PROT_DMA;
- dma = true;
- } else {
- tf.command = ATA_CMD_READ_LOG_EXT;
- tf.protocol = ATA_PROT_PIO;
- dma = false;
- }
- tf.lbal = log;
- tf.lbam = page;
- tf.nsect = sectors;
- tf.hob_nsect = sectors >> 8;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
-
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
- buf, sectors * ATA_SECT_SIZE, 0);
-
- if (err_mask && dma) {
- dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG;
- ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n");
- goto retry;
- }
-
- DPRINTK("EXIT, err_mask=%x\n", err_mask);
- return err_mask;
-}
-
-/**
* ata_eh_read_log_10h - Read log page 10h for NCQ error details
* @dev: Device to read log page 10h from
* @tag: Resulting tag of the failed command
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b0866f040d1f..d462c5a3a7ef 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -903,32 +903,32 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
{
u8 stat = tf->command, err = tf->feature;
- printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ pr_warn("ata%u: status=0x%02x { ", id, stat);
if (stat & ATA_BUSY) {
- printk("Busy }\n"); /* Data is not valid in this case */
+ pr_cont("Busy }\n"); /* Data is not valid in this case */
} else {
- if (stat & ATA_DRDY) printk("DriveReady ");
- if (stat & ATA_DF) printk("DeviceFault ");
- if (stat & ATA_DSC) printk("SeekComplete ");
- if (stat & ATA_DRQ) printk("DataRequest ");
- if (stat & ATA_CORR) printk("CorrectedError ");
- if (stat & ATA_SENSE) printk("Sense ");
- if (stat & ATA_ERR) printk("Error ");
- printk("}\n");
+ if (stat & ATA_DRDY) pr_cont("DriveReady ");
+ if (stat & ATA_DF) pr_cont("DeviceFault ");
+ if (stat & ATA_DSC) pr_cont("SeekComplete ");
+ if (stat & ATA_DRQ) pr_cont("DataRequest ");
+ if (stat & ATA_CORR) pr_cont("CorrectedError ");
+ if (stat & ATA_SENSE) pr_cont("Sense ");
+ if (stat & ATA_ERR) pr_cont("Error ");
+ pr_cont("}\n");
if (err) {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
- if (err & ATA_ABORTED) printk("DriveStatusError ");
+ pr_warn("ata%u: error=0x%02x { ", id, err);
+ if (err & ATA_ABORTED) pr_cont("DriveStatusError ");
if (err & ATA_ICRC) {
if (err & ATA_ABORTED)
- printk("BadCRC ");
- else printk("Sector ");
+ pr_cont("BadCRC ");
+ else pr_cont("Sector ");
}
- if (err & ATA_UNC) printk("UncorrectableError ");
- if (err & ATA_IDNF) printk("SectorIdNotFound ");
- if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
- if (err & ATA_AMNF) printk("AddrMarkNotFound ");
- printk("}\n");
+ if (err & ATA_UNC) pr_cont("UncorrectableError ");
+ if (err & ATA_IDNF) pr_cont("SectorIdNotFound ");
+ if (err & ATA_TRK0NF) pr_cont("TrackZeroNotFound ");
+ if (err & ATA_AMNF) pr_cont("AddrMarkNotFound ");
+ pr_cont("}\n");
}
}
}
@@ -1059,8 +1059,7 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
translate_done:
if (verbose)
- printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x "
- "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n",
+ pr_err("ata%u: translated ATA stat/err 0x%02x/%02x to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n",
id, drv_stat, drv_err, *sk, *asc, *ascq);
return;
}
@@ -1322,6 +1321,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
blk_queue_flush_queueable(q, false);
+ if (dev->flags & ATA_DFLAG_TRUSTED)
+ sdev->security_supported = 1;
+
dev->sdev = sdev;
return 0;
}
@@ -3127,7 +3129,7 @@ ata_scsi_map_proto(u8 byte1)
* ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
* @qc: command structure to be initialized
*
- * Handles either 12 or 16-byte versions of the CDB.
+ * Handles either 12, 16, or 32-byte versions of the CDB.
*
* RETURNS:
* Zero on success, non-zero on failure.
@@ -3139,13 +3141,19 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
struct ata_device *dev = qc->dev;
const u8 *cdb = scmd->cmnd;
u16 fp;
+ u16 cdb_offset = 0;
+
+ /* 7Fh variable length cmd means a ata pass-thru(32) */
+ if (cdb[0] == VARIABLE_LENGTH_CMD)
+ cdb_offset = 9;
- if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) {
+ tf->protocol = ata_scsi_map_proto(cdb[1 + cdb_offset]);
+ if (tf->protocol == ATA_PROT_UNKNOWN) {
fp = 1;
goto invalid_fld;
}
- if (ata_is_ncq(tf->protocol) && (cdb[2] & 0x3) == 0)
+ if (ata_is_ncq(tf->protocol) && (cdb[2 + cdb_offset] & 0x3) == 0)
tf->protocol = ATA_PROT_NCQ_NODATA;
/* enable LBA */
@@ -3181,7 +3189,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
tf->lbah = cdb[12];
tf->device = cdb[13];
tf->command = cdb[14];
- } else {
+ } else if (cdb[0] == ATA_12) {
/*
* 12-byte CDB - incapable of extended commands.
*/
@@ -3194,6 +3202,30 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
tf->lbah = cdb[7];
tf->device = cdb[8];
tf->command = cdb[9];
+ } else {
+ /*
+ * 32-byte CDB - may contain extended command fields.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (cdb[10] & 0x01) {
+ tf->hob_feature = cdb[20];
+ tf->hob_nsect = cdb[22];
+ tf->hob_lbal = cdb[16];
+ tf->hob_lbam = cdb[15];
+ tf->hob_lbah = cdb[14];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = cdb[21];
+ tf->nsect = cdb[23];
+ tf->lbal = cdb[19];
+ tf->lbam = cdb[18];
+ tf->lbah = cdb[17];
+ tf->device = cdb[24];
+ tf->command = cdb[25];
+ tf->auxiliary = get_unaligned_be32(&cdb[28]);
}
/* For NCQ commands copy the tag value */
@@ -3564,6 +3596,11 @@ static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf)
dev->class == ATA_DEV_ZAC)
supported = 3;
break;
+ case SECURITY_PROTOCOL_IN:
+ case SECURITY_PROTOCOL_OUT:
+ if (dev->flags & ATA_DFLAG_TRUSTED)
+ supported = 3;
+ break;
default:
break;
}
@@ -3910,7 +3947,7 @@ static int ata_mselect_control(struct ata_queued_cmd *qc,
}
/**
- * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands
+ * ata_scsi_mode_select_xlat - Simulate MODE SELECT 6, 10 commands
* @qc: Storage for translated ATA taskfile
*
* Converts a MODE SELECT command to an ATA SET FEATURES taskfile.
@@ -4068,6 +4105,99 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc)
return 1;
}
+static u8 ata_scsi_trusted_op(u32 len, bool send, bool dma)
+{
+ if (len == 0)
+ return ATA_CMD_TRUSTED_NONDATA;
+ else if (send)
+ return dma ? ATA_CMD_TRUSTED_SND_DMA : ATA_CMD_TRUSTED_SND;
+ else
+ return dma ? ATA_CMD_TRUSTED_RCV_DMA : ATA_CMD_TRUSTED_RCV;
+}
+
+static unsigned int ata_scsi_security_inout_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
+ struct ata_taskfile *tf = &qc->tf;
+ u8 secp = cdb[1];
+ bool send = (cdb[0] == SECURITY_PROTOCOL_OUT);
+ u16 spsp = get_unaligned_be16(&cdb[2]);
+ u32 len = get_unaligned_be32(&cdb[6]);
+ bool dma = !(qc->dev->flags & ATA_DFLAG_PIO);
+
+ /*
+ * We don't support the ATA "security" protocol.
+ */
+ if (secp == 0xef) {
+ ata_scsi_set_invalid_field(qc->dev, scmd, 1, 0);
+ return 1;
+ }
+
+ if (cdb[4] & 7) { /* INC_512 */
+ if (len > 0xffff) {
+ ata_scsi_set_invalid_field(qc->dev, scmd, 6, 0);
+ return 1;
+ }
+ } else {
+ if (len > 0x01fffe00) {
+ ata_scsi_set_invalid_field(qc->dev, scmd, 6, 0);
+ return 1;
+ }
+
+ /* convert to the sector-based ATA addressing */
+ len = (len + 511) / 512;
+ }
+
+ tf->protocol = dma ? ATA_PROT_DMA : ATA_PROT_PIO;
+ tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR | ATA_TFLAG_LBA;
+ if (send)
+ tf->flags |= ATA_TFLAG_WRITE;
+ tf->command = ata_scsi_trusted_op(len, send, dma);
+ tf->feature = secp;
+ tf->lbam = spsp & 0xff;
+ tf->lbah = spsp >> 8;
+
+ if (len) {
+ tf->nsect = len & 0xff;
+ tf->lbal = len >> 8;
+ } else {
+ if (!send)
+ tf->lbah = (1 << 7);
+ }
+
+ ata_qc_set_pc_nbytes(qc);
+ return 0;
+}
+
+/**
+ * ata_scsi_var_len_cdb_xlat - SATL variable length CDB to Handler
+ * @qc: Command to be translated
+ *
+ * Translate a SCSI variable length CDB to specified commands.
+ * It checks a service action value in CDB to call corresponding handler.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure
+ *
+ */
+static unsigned int ata_scsi_var_len_cdb_xlat(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
+ const u16 sa = get_unaligned_be16(&cdb[8]);
+
+ /*
+ * if service action represents a ata pass-thru(32) command,
+ * then pass it to ata_scsi_pass_thru handler.
+ */
+ if (sa == ATA_32)
+ return ata_scsi_pass_thru(qc);
+
+ /* unsupported service action */
+ return 1;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -4108,6 +4238,9 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
case ATA_16:
return ata_scsi_pass_thru;
+ case VARIABLE_LENGTH_CMD:
+ return ata_scsi_var_len_cdb_xlat;
+
case MODE_SELECT:
case MODE_SELECT_10:
return ata_scsi_mode_select_xlat;
@@ -4119,6 +4252,12 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
case ZBC_OUT:
return ata_scsi_zbc_out_xlat;
+ case SECURITY_PROTOCOL_IN:
+ case SECURITY_PROTOCOL_OUT:
+ if (!(dev->flags & ATA_DFLAG_TRUSTED))
+ break;
+ return ata_scsi_security_inout_xlat;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
@@ -4386,7 +4525,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
shost->max_id = 16;
shost->max_lun = 1;
shost->max_channel = 1;
- shost->max_cmd_len = 16;
+ shost->max_cmd_len = 32;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 052921352f31..cc2f2e35f4c2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -716,24 +716,10 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
- if (PageHighMem(page)) {
- unsigned long flags;
-
- /* FIXME: use a bounce buffer */
- local_irq_save(flags);
- buf = kmap_atomic(page);
-
- /* do the actual data transfer */
- ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size,
- do_write);
-
- kunmap_atomic(buf);
- local_irq_restore(flags);
- } else {
- buf = page_address(page);
- ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size,
- do_write);
- }
+ /* do the actual data transfer */
+ buf = kmap_atomic(page);
+ ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write);
+ kunmap_atomic(buf);
if (!do_write && !PageSlab(page))
flush_dcache_page(page);
@@ -861,24 +847,10 @@ next_sg:
DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
- if (PageHighMem(page)) {
- unsigned long flags;
-
- /* FIXME: use bounce buffer */
- local_irq_save(flags);
- buf = kmap_atomic(page);
-
- /* do the actual data transfer */
- consumed = ap->ops->sff_data_xfer(qc, buf + offset,
- count, rw);
-
- kunmap_atomic(buf);
- local_irq_restore(flags);
- } else {
- buf = page_address(page);
- consumed = ap->ops->sff_data_xfer(qc, buf + offset,
- count, rw);
- }
+ /* do the actual data transfer */
+ buf = kmap_atomic(page);
+ consumed = ap->ops->sff_data_xfer(qc, buf + offset, count, rw);
+ kunmap_atomic(buf);
bytes -= min(bytes, consumed);
qc->curbytes += count;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5afe35baf61b..839d487394b7 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -98,6 +98,8 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
extern const char *sata_spd_string(unsigned int spd);
extern int ata_port_probe(struct ata_port *ap);
extern void __ata_port_probe(struct ata_port *ap);
+extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
+ u8 page, void *buf, unsigned int sectors);
#define to_ata_port(d) container_of(d, struct ata_port, tdev)
@@ -160,8 +162,6 @@ extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_done(struct ata_link *link, struct ata_device *dev,
unsigned int action);
-extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
- u8 page, void *buf, unsigned int sectors);
extern void ata_eh_autopsy(struct ata_port *ap);
const char *ata_get_cmd_descript(u8 command);
extern void ata_eh_report(struct ata_port *ap);
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 9c5780a7e1b9..0e55a8da2748 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1597,8 +1597,6 @@ static int bfin_atapi_probe(struct platform_device *pdev)
return -ENODEV;
}
- platform_set_drvdata(pdev, host);
-
return 0;
}
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index bf1b910c5d69..0a550190955a 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -944,7 +944,6 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
goto err_rel_gpio;
}
- platform_set_drvdata(pdev, drv_data);
drv_data->pdev = pdev;
drv_data->ide_base = ide_base;
drv_data->udma_in_phys = mem_res->start + IDEUDMADATAIN;
diff --git a/drivers/ata/pata_ftide010.c b/drivers/ata/pata_ftide010.c
new file mode 100644
index 000000000000..5d4b72e21161
--- /dev/null
+++ b/drivers/ata/pata_ftide010.c
@@ -0,0 +1,567 @@
+/*
+ * Faraday Technology FTIDE010 driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Includes portions of the SL2312/SL3516/Gemini PATA driver
+ * Copyright (C) 2003 StorLine, Inc <jason@storlink.com.tw>
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2010 Frederic Pecourt <opengemini@free.fr>
+ * Copyright (C) 2011 Tobias Waldvogel <tobias.waldvogel@gmail.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/bitops.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include "sata_gemini.h"
+
+#define DRV_NAME "pata_ftide010"
+
+/**
+ * struct ftide010 - state container for the Faraday FTIDE010
+ * @dev: pointer back to the device representing this controller
+ * @base: remapped I/O space address
+ * @pclk: peripheral clock for the IDE block
+ * @host: pointer to the ATA host for this device
+ * @master_cbl: master cable type
+ * @slave_cbl: slave cable type
+ * @sg: Gemini SATA bridge pointer, if running on the Gemini
+ * @master_to_sata0: Gemini SATA bridge: the ATA master is connected
+ * to the SATA0 bridge
+ * @slave_to_sata0: Gemini SATA bridge: the ATA slave is connected
+ * to the SATA0 bridge
+ * @master_to_sata1: Gemini SATA bridge: the ATA master is connected
+ * to the SATA1 bridge
+ * @slave_to_sata1: Gemini SATA bridge: the ATA slave is connected
+ * to the SATA1 bridge
+ */
+struct ftide010 {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *pclk;
+ struct ata_host *host;
+ unsigned int master_cbl;
+ unsigned int slave_cbl;
+ /* Gemini-specific properties */
+ struct sata_gemini *sg;
+ bool master_to_sata0;
+ bool slave_to_sata0;
+ bool master_to_sata1;
+ bool slave_to_sata1;
+};
+
+#define FTIDE010_DMA_REG 0x00
+#define FTIDE010_DMA_STATUS 0x02
+#define FTIDE010_IDE_BMDTPR 0x04
+#define FTIDE010_IDE_DEVICE_ID 0x08
+#define FTIDE010_PIO_TIMING 0x10
+#define FTIDE010_MWDMA_TIMING 0x11
+#define FTIDE010_UDMA_TIMING0 0x12 /* Master */
+#define FTIDE010_UDMA_TIMING1 0x13 /* Slave */
+#define FTIDE010_CLK_MOD 0x14
+/* These registers are mapped directly to the IDE registers */
+#define FTIDE010_CMD_DATA 0x20
+#define FTIDE010_ERROR_FEATURES 0x21
+#define FTIDE010_NSECT 0x22
+#define FTIDE010_LBAL 0x23
+#define FTIDE010_LBAM 0x24
+#define FTIDE010_LBAH 0x25
+#define FTIDE010_DEVICE 0x26
+#define FTIDE010_STATUS_COMMAND 0x27
+#define FTIDE010_ALTSTAT_CTRL 0x36
+
+/* Set this bit for UDMA mode 5 and 6 */
+#define FTIDE010_UDMA_TIMING_MODE_56 BIT(7)
+
+/* 0 = 50 MHz, 1 = 66 MHz */
+#define FTIDE010_CLK_MOD_DEV0_CLK_SEL BIT(0)
+#define FTIDE010_CLK_MOD_DEV1_CLK_SEL BIT(1)
+/* Enable UDMA on a device */
+#define FTIDE010_CLK_MOD_DEV0_UDMA_EN BIT(4)
+#define FTIDE010_CLK_MOD_DEV1_UDMA_EN BIT(5)
+
+static struct scsi_host_template pata_ftide010_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+/*
+ * Bus timings
+ *
+ * The unit of the below required timings is two clock periods of the ATA
+ * reference clock which is 30 nanoseconds per unit at 66MHz and 20
+ * nanoseconds per unit at 50 MHz. The PIO timings assume 33MHz speed for
+ * PIO.
+ *
+ * pio_active_time: array of 5 elements for T2 timing for Mode 0,
+ * 1, 2, 3 and 4. Range 0..15.
+ * pio_recovery_time: array of 5 elements for T2l timing for Mode 0,
+ * 1, 2, 3 and 4. Range 0..15.
+ * mdma_50_active_time: array of 4 elements for Td timing for multi
+ * word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15.
+ * mdma_50_recovery_time: array of 4 elements for Tk timing for
+ * multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15.
+ * mdma_66_active_time: array of 4 elements for Td timing for multi
+ * word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15.
+ * mdma_66_recovery_time: array of 4 elements for Tk timing for
+ * multi word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15.
+ * udma_50_setup_time: array of 4 elements for Tvds timing for ultra
+ * DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7.
+ * udma_50_hold_time: array of 4 elements for Tdvh timing for
+ * multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7.
+ * udma_66_setup_time: array of 4 elements for Tvds timing for multi
+ * word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7.
+ * udma_66_hold_time: array of 4 elements for Tdvh timing for
+ * multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7.
+ */
+static const u8 pio_active_time[5] = {10, 10, 10, 3, 3};
+static const u8 pio_recovery_time[5] = {10, 3, 1, 3, 1};
+static const u8 mwdma_50_active_time[3] = {6, 2, 2};
+static const u8 mwdma_50_recovery_time[3] = {6, 2, 1};
+static const u8 mwdma_66_active_time[3] = {8, 3, 3};
+static const u8 mwdma_66_recovery_time[3] = {8, 2, 1};
+static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1};
+static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1};
+static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, };
+static const u8 udma_66_hold_time[7] = {};
+
+/*
+ * We set 66 MHz for all MWDMA modes
+ */
+static const bool set_mdma_66_mhz[] = { true, true, true, true };
+
+/*
+ * We set 66 MHz for UDMA modes 3, 4 and 6 and no others
+ */
+static const bool set_udma_66_mhz[] = { false, false, false, true, true, false, true };
+
+static void ftide010_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ftide010 *ftide = ap->host->private_data;
+ u8 speed = adev->dma_mode;
+ u8 devno = adev->devno & 1;
+ u8 udma_en_mask;
+ u8 f66m_en_mask;
+ u8 clkreg;
+ u8 timreg;
+ u8 i;
+
+ /* Target device 0 (master) or 1 (slave) */
+ if (!devno) {
+ udma_en_mask = FTIDE010_CLK_MOD_DEV0_UDMA_EN;
+ f66m_en_mask = FTIDE010_CLK_MOD_DEV0_CLK_SEL;
+ } else {
+ udma_en_mask = FTIDE010_CLK_MOD_DEV1_UDMA_EN;
+ f66m_en_mask = FTIDE010_CLK_MOD_DEV1_CLK_SEL;
+ }
+
+ clkreg = readb(ftide->base + FTIDE010_CLK_MOD);
+ clkreg &= ~udma_en_mask;
+ clkreg &= ~f66m_en_mask;
+
+ if (speed & XFER_UDMA_0) {
+ i = speed & ~XFER_UDMA_0;
+ dev_dbg(ftide->dev, "set UDMA mode %02x, index %d\n",
+ speed, i);
+
+ clkreg |= udma_en_mask;
+ if (set_udma_66_mhz[i]) {
+ clkreg |= f66m_en_mask;
+ timreg = udma_66_setup_time[i] << 4 |
+ udma_66_hold_time[i];
+ } else {
+ timreg = udma_50_setup_time[i] << 4 |
+ udma_50_hold_time[i];
+ }
+
+ /* A special bit needs to be set for modes 5 and 6 */
+ if (i >= 5)
+ timreg |= FTIDE010_UDMA_TIMING_MODE_56;
+
+ dev_dbg(ftide->dev, "UDMA write clkreg = %02x, timreg = %02x\n",
+ clkreg, timreg);
+
+ writeb(clkreg, ftide->base + FTIDE010_CLK_MOD);
+ writeb(timreg, ftide->base + FTIDE010_UDMA_TIMING0 + devno);
+ } else {
+ i = speed & ~XFER_MW_DMA_0;
+ dev_dbg(ftide->dev, "set MWDMA mode %02x, index %d\n",
+ speed, i);
+
+ if (set_mdma_66_mhz[i]) {
+ clkreg |= f66m_en_mask;
+ timreg = mwdma_66_active_time[i] << 4 |
+ mwdma_66_recovery_time[i];
+ } else {
+ timreg = mwdma_50_active_time[i] << 4 |
+ mwdma_50_recovery_time[i];
+ }
+ dev_dbg(ftide->dev,
+ "MWDMA write clkreg = %02x, timreg = %02x\n",
+ clkreg, timreg);
+ /* This will affect all devices */
+ writeb(clkreg, ftide->base + FTIDE010_CLK_MOD);
+ writeb(timreg, ftide->base + FTIDE010_MWDMA_TIMING);
+ }
+
+ /*
+ * Store the current device (master or slave) in ap->private_data
+ * so that .qc_issue() can detect if this changes and reprogram
+ * the DMA settings.
+ */
+ ap->private_data = adev;
+
+ return;
+}
+
+static void ftide010_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ftide010 *ftide = ap->host->private_data;
+ u8 pio = adev->pio_mode - XFER_PIO_0;
+
+ dev_dbg(ftide->dev, "set PIO mode %02x, index %d\n",
+ adev->pio_mode, pio);
+ writeb(pio_active_time[pio] << 4 | pio_recovery_time[pio],
+ ftide->base + FTIDE010_PIO_TIMING);
+}
+
+/*
+ * We implement our own qc_issue() callback since we may need to set up
+ * the timings differently for master and slave transfers: the CLK_MOD_REG
+ * and MWDMA_TIMING_REG is shared between master and slave, so reprogramming
+ * this may be necessary.
+ */
+static unsigned int ftide010_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+
+ /*
+ * If the device changed, i.e. slave->master, master->slave,
+ * then set up the DMA mode again so we are sure the timings
+ * are correct.
+ */
+ if (adev != ap->private_data && ata_dma_enabled(adev))
+ ftide010_set_dmamode(ap, adev);
+
+ return ata_bmdma_qc_issue(qc);
+}
+
+static struct ata_port_operations pata_ftide010_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .set_dmamode = ftide010_set_dmamode,
+ .set_piomode = ftide010_set_piomode,
+ .qc_issue = ftide010_qc_issue,
+};
+
+static struct ata_port_info ftide010_port_info[] = {
+ {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .pio_mask = ATA_PIO4,
+ .port_ops = &pata_ftide010_port_ops,
+ },
+};
+
+#if IS_ENABLED(CONFIG_SATA_GEMINI)
+
+static int pata_ftide010_gemini_port_start(struct ata_port *ap)
+{
+ struct ftide010 *ftide = ap->host->private_data;
+ struct device *dev = ftide->dev;
+ struct sata_gemini *sg = ftide->sg;
+ int bridges = 0;
+ int ret;
+
+ ret = ata_bmdma_port_start(ap);
+ if (ret)
+ return ret;
+
+ if (ftide->master_to_sata0) {
+ dev_info(dev, "SATA0 (master) start\n");
+ ret = gemini_sata_start_bridge(sg, 0);
+ if (!ret)
+ bridges++;
+ }
+ if (ftide->master_to_sata1) {
+ dev_info(dev, "SATA1 (master) start\n");
+ ret = gemini_sata_start_bridge(sg, 1);
+ if (!ret)
+ bridges++;
+ }
+ /* Avoid double-starting */
+ if (ftide->slave_to_sata0 && !ftide->master_to_sata0) {
+ dev_info(dev, "SATA0 (slave) start\n");
+ ret = gemini_sata_start_bridge(sg, 0);
+ if (!ret)
+ bridges++;
+ }
+ /* Avoid double-starting */
+ if (ftide->slave_to_sata1 && !ftide->master_to_sata1) {
+ dev_info(dev, "SATA1 (slave) start\n");
+ ret = gemini_sata_start_bridge(sg, 1);
+ if (!ret)
+ bridges++;
+ }
+
+ dev_info(dev, "brought %d bridges online\n", bridges);
+ return (bridges > 0) ? 0 : -EINVAL; // -ENODEV;
+}
+
+static void pata_ftide010_gemini_port_stop(struct ata_port *ap)
+{
+ struct ftide010 *ftide = ap->host->private_data;
+ struct device *dev = ftide->dev;
+ struct sata_gemini *sg = ftide->sg;
+
+ if (ftide->master_to_sata0) {
+ dev_info(dev, "SATA0 (master) stop\n");
+ gemini_sata_stop_bridge(sg, 0);
+ }
+ if (ftide->master_to_sata1) {
+ dev_info(dev, "SATA1 (master) stop\n");
+ gemini_sata_stop_bridge(sg, 1);
+ }
+ /* Avoid double-stopping */
+ if (ftide->slave_to_sata0 && !ftide->master_to_sata0) {
+ dev_info(dev, "SATA0 (slave) stop\n");
+ gemini_sata_stop_bridge(sg, 0);
+ }
+ /* Avoid double-stopping */
+ if (ftide->slave_to_sata1 && !ftide->master_to_sata1) {
+ dev_info(dev, "SATA1 (slave) stop\n");
+ gemini_sata_stop_bridge(sg, 1);
+ }
+}
+
+static int pata_ftide010_gemini_cable_detect(struct ata_port *ap)
+{
+ struct ftide010 *ftide = ap->host->private_data;
+
+ /*
+ * Return the master cable, I have no clue how to return a different
+ * cable for the slave than for the master.
+ */
+ return ftide->master_cbl;
+}
+
+static int pata_ftide010_gemini_init(struct ftide010 *ftide,
+ bool is_ata1)
+{
+ struct device *dev = ftide->dev;
+ struct sata_gemini *sg;
+ enum gemini_muxmode muxmode;
+
+ /* Look up SATA bridge */
+ sg = gemini_sata_bridge_get();
+ if (IS_ERR(sg))
+ return PTR_ERR(sg);
+ ftide->sg = sg;
+
+ muxmode = gemini_sata_get_muxmode(sg);
+
+ /* Special ops */
+ pata_ftide010_port_ops.port_start =
+ pata_ftide010_gemini_port_start;
+ pata_ftide010_port_ops.port_stop =
+ pata_ftide010_gemini_port_stop;
+ pata_ftide010_port_ops.cable_detect =
+ pata_ftide010_gemini_cable_detect;
+
+ /* Flag port as SATA-capable */
+ if (gemini_sata_bridge_enabled(sg, is_ata1))
+ ftide010_port_info[0].flags |= ATA_FLAG_SATA;
+
+ /*
+ * We assume that a simple 40-wire cable is used in the PATA mode.
+ * if you're adding a system using the PATA interface, make sure
+ * the right cable is set up here, it might be necessary to use
+ * special hardware detection or encode the cable type in the device
+ * tree with special properties.
+ */
+ if (!is_ata1) {
+ switch (muxmode) {
+ case GEMINI_MUXMODE_0:
+ ftide->master_cbl = ATA_CBL_SATA;
+ ftide->slave_cbl = ATA_CBL_PATA40;
+ ftide->master_to_sata0 = true;
+ break;
+ case GEMINI_MUXMODE_1:
+ ftide->master_cbl = ATA_CBL_SATA;
+ ftide->slave_cbl = ATA_CBL_NONE;
+ ftide->master_to_sata0 = true;
+ break;
+ case GEMINI_MUXMODE_2:
+ ftide->master_cbl = ATA_CBL_PATA40;
+ ftide->slave_cbl = ATA_CBL_PATA40;
+ break;
+ case GEMINI_MUXMODE_3:
+ ftide->master_cbl = ATA_CBL_SATA;
+ ftide->slave_cbl = ATA_CBL_SATA;
+ ftide->master_to_sata0 = true;
+ ftide->slave_to_sata1 = true;
+ break;
+ }
+ } else {
+ switch (muxmode) {
+ case GEMINI_MUXMODE_0:
+ ftide->master_cbl = ATA_CBL_SATA;
+ ftide->slave_cbl = ATA_CBL_NONE;
+ ftide->master_to_sata1 = true;
+ break;
+ case GEMINI_MUXMODE_1:
+ ftide->master_cbl = ATA_CBL_SATA;
+ ftide->slave_cbl = ATA_CBL_PATA40;
+ ftide->master_to_sata1 = true;
+ break;
+ case GEMINI_MUXMODE_2:
+ ftide->master_cbl = ATA_CBL_SATA;
+ ftide->slave_cbl = ATA_CBL_SATA;
+ ftide->slave_to_sata0 = true;
+ ftide->master_to_sata1 = true;
+ break;
+ case GEMINI_MUXMODE_3:
+ ftide->master_cbl = ATA_CBL_PATA40;
+ ftide->slave_cbl = ATA_CBL_PATA40;
+ break;
+ }
+ }
+ dev_info(dev, "set up Gemini PATA%d\n", is_ata1);
+
+ return 0;
+}
+#else
+static int pata_ftide010_gemini_init(struct ftide010 *ftide,
+ bool is_ata1)
+{
+ return -ENOTSUPP;
+}
+#endif
+
+
+static int pata_ftide010_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct ata_port_info pi = ftide010_port_info[0];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ftide010 *ftide;
+ struct resource *res;
+ int irq;
+ int ret;
+ int i;
+
+ ftide = devm_kzalloc(dev, sizeof(*ftide), GFP_KERNEL);
+ if (!ftide)
+ return -ENOMEM;
+ ftide->dev = dev;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ ftide->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ftide->base))
+ return PTR_ERR(ftide->base);
+
+ ftide->pclk = devm_clk_get(dev, "PCLK");
+ if (!IS_ERR(ftide->pclk)) {
+ ret = clk_prepare_enable(ftide->pclk);
+ if (ret) {
+ dev_err(dev, "failed to enable PCLK\n");
+ return ret;
+ }
+ }
+
+ /* Some special Cortina Gemini init, if needed */
+ if (of_device_is_compatible(np, "cortina,gemini-pata")) {
+ /*
+ * We need to know which instance is probing (the
+ * Gemini has two instances of FTIDE010) and we do
+ * this simply by looking at the physical base
+ * address, which is 0x63400000 for ATA1, else we
+ * are ATA0. This will also set up the cable types.
+ */
+ ret = pata_ftide010_gemini_init(ftide,
+ (res->start == 0x63400000));
+ if (ret)
+ goto err_dis_clk;
+ } else {
+ /* Else assume we are connected using PATA40 */
+ ftide->master_cbl = ATA_CBL_PATA40;
+ ftide->slave_cbl = ATA_CBL_PATA40;
+ }
+
+ ftide->host = ata_host_alloc_pinfo(dev, ppi, 1);
+ if (!ftide->host) {
+ ret = -ENOMEM;
+ goto err_dis_clk;
+ }
+ ftide->host->private_data = ftide;
+
+ for (i = 0; i < ftide->host->n_ports; i++) {
+ struct ata_port *ap = ftide->host->ports[i];
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ ioaddr->bmdma_addr = ftide->base + FTIDE010_DMA_REG;
+ ioaddr->cmd_addr = ftide->base + FTIDE010_CMD_DATA;
+ ioaddr->ctl_addr = ftide->base + FTIDE010_ALTSTAT_CTRL;
+ ioaddr->altstatus_addr = ftide->base + FTIDE010_ALTSTAT_CTRL;
+ ata_sff_std_ports(ioaddr);
+ }
+
+ dev_info(dev, "device ID %08x, irq %d, reg %pR\n",
+ readl(ftide->base + FTIDE010_IDE_DEVICE_ID), irq, res);
+
+ ret = ata_host_activate(ftide->host, irq, ata_bmdma_interrupt,
+ 0, &pata_ftide010_sht);
+ if (ret)
+ goto err_dis_clk;
+
+ return 0;
+
+err_dis_clk:
+ if (!IS_ERR(ftide->pclk))
+ clk_disable_unprepare(ftide->pclk);
+ return ret;
+}
+
+static int pata_ftide010_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+ struct ftide010 *ftide = host->private_data;
+
+ ata_host_detach(ftide->host);
+ if (!IS_ERR(ftide->pclk))
+ clk_disable_unprepare(ftide->pclk);
+
+ return 0;
+}
+
+static const struct of_device_id pata_ftide010_of_match[] = {
+ {
+ .compatible = "faraday,ftide010",
+ },
+ {},
+};
+
+static struct platform_driver pata_ftide010_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(pata_ftide010_of_match),
+ },
+ .probe = pata_ftide010_probe,
+ .remove = pata_ftide010_remove,
+};
+module_platform_driver(pata_ftide010_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index f524a9099d01..1ba03d6df951 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -1038,7 +1038,7 @@ static void octeon_cf_shutdown(struct device *dev)
}
}
-static struct of_device_id octeon_cf_match[] = {
+static const struct of_device_id octeon_cf_match[] = {
{
.compatible = "cavium,ebt3000-compact-flash",
},
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c8b6a780a290..653b9a0bf727 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -148,8 +148,6 @@ static int rb532_pata_driver_probe(struct platform_device *pdev)
if (!ah)
return -ENOMEM;
- platform_set_drvdata(pdev, ah);
-
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 9ce5952216bc..959bb54fd803 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -292,7 +292,7 @@ static struct ata_port_operations rdc_pata_ops = {
.prereset = rdc_pata_prereset,
};
-static struct ata_port_info rdc_port_info = {
+static const struct ata_port_info rdc_port_info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index 431c7de30ce6..50801c40b029 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -582,8 +582,6 @@ static int __init pata_s3c_probe(struct platform_device *pdev)
/* Set endianness and enable the interface */
pata_s3c_hwinit(info, pdata);
- platform_set_drvdata(pdev, host);
-
ret = ata_host_activate(host, info->irq,
info->irq ? pata_s3c_irq : NULL,
0, &pata_s3c_sht);
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index b920c3407f8b..1b80a66caa54 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -81,7 +81,7 @@ static struct ata_port_operations sch_pata_ops = {
.set_dmamode = sch_set_dmamode,
};
-static struct ata_port_info sch_port_info = {
+static const struct ata_port_info sch_port_info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index e0939bd5ea73..ce128d5a6ded 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1285,7 +1285,6 @@ static int sata_dwc_probe(struct platform_device *ofdev)
if (err)
dev_err(&ofdev->dev, "failed to activate host");
- dev_set_drvdata(&ofdev->dev, host);
return 0;
error_out:
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 01734d54c69c..95bf3abda6f6 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1523,8 +1523,6 @@ static int sata_fsl_probe(struct platform_device *ofdev)
ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
&sata_fsl_sht);
- platform_set_drvdata(ofdev, host);
-
host_priv->intr_coalescing.show = fsl_sata_intr_coalescing_show;
host_priv->intr_coalescing.store = fsl_sata_intr_coalescing_store;
sysfs_attr_init(&host_priv->intr_coalescing.attr);
diff --git a/drivers/ata/sata_gemini.c b/drivers/ata/sata_gemini.c
new file mode 100644
index 000000000000..8c704523bae7
--- /dev/null
+++ b/drivers/ata/sata_gemini.c
@@ -0,0 +1,438 @@
+/*
+ * Cortina Systems Gemini SATA bridge add-on to Faraday FTIDE010
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include "sata_gemini.h"
+
+#define DRV_NAME "gemini_sata_bridge"
+
+/**
+ * struct sata_gemini - a state container for a Gemini SATA bridge
+ * @dev: the containing device
+ * @base: remapped I/O memory base
+ * @muxmode: the current muxing mode
+ * @ide_pins: if the device is using the plain IDE interface pins
+ * @sata_bridge: if the device enables the SATA bridge
+ * @sata0_reset: SATA0 reset handler
+ * @sata1_reset: SATA1 reset handler
+ * @sata0_pclk: SATA0 PCLK handler
+ * @sata1_pclk: SATA1 PCLK handler
+ */
+struct sata_gemini {
+ struct device *dev;
+ void __iomem *base;
+ enum gemini_muxmode muxmode;
+ bool ide_pins;
+ bool sata_bridge;
+ struct reset_control *sata0_reset;
+ struct reset_control *sata1_reset;
+ struct clk *sata0_pclk;
+ struct clk *sata1_pclk;
+};
+
+/* Global IDE PAD Skew Control Register */
+#define GEMINI_GLOBAL_IDE_SKEW_CTRL 0x18
+#define GEMINI_IDE1_HOST_STROBE_DELAY_SHIFT 28
+#define GEMINI_IDE1_DEVICE_STROBE_DELAY_SHIFT 24
+#define GEMINI_IDE1_OUTPUT_IO_SKEW_SHIFT 20
+#define GEMINI_IDE1_INPUT_IO_SKEW_SHIFT 16
+#define GEMINI_IDE0_HOST_STROBE_DELAY_SHIFT 12
+#define GEMINI_IDE0_DEVICE_STROBE_DELAY_SHIFT 8
+#define GEMINI_IDE0_OUTPUT_IO_SKEW_SHIFT 4
+#define GEMINI_IDE0_INPUT_IO_SKEW_SHIFT 0
+
+/* Miscellaneous Control Register */
+#define GEMINI_GLOBAL_MISC_CTRL 0x30
+/*
+ * Values of IDE IOMUX bits in the misc control register
+ *
+ * Bits 26:24 are "IDE IO Select", which decides what SATA
+ * adapters are connected to which of the two IDE/ATA
+ * controllers in the Gemini. We can connect the two IDE blocks
+ * to one SATA adapter each, both acting as master, or one IDE
+ * blocks to two SATA adapters so the IDE block can act in a
+ * master/slave configuration.
+ *
+ * We also bring out different blocks on the actual IDE
+ * pins (not SATA pins) if (and only if) these are muxed in.
+ *
+ * 111-100 - Reserved
+ * Mode 0: 000 - ata0 master <-> sata0
+ * ata1 master <-> sata1
+ * ata0 slave interface brought out on IDE pads
+ * Mode 1: 001 - ata0 master <-> sata0
+ * ata1 master <-> sata1
+ * ata1 slave interface brought out on IDE pads
+ * Mode 2: 010 - ata1 master <-> sata1
+ * ata1 slave <-> sata0
+ * ata0 master and slave interfaces brought out
+ * on IDE pads
+ * Mode 3: 011 - ata0 master <-> sata0
+ * ata1 slave <-> sata1
+ * ata1 master and slave interfaces brought out
+ * on IDE pads
+ */
+#define GEMINI_IDE_IOMUX_MASK (7 << 24)
+#define GEMINI_IDE_IOMUX_MODE0 (0 << 24)
+#define GEMINI_IDE_IOMUX_MODE1 (1 << 24)
+#define GEMINI_IDE_IOMUX_MODE2 (2 << 24)
+#define GEMINI_IDE_IOMUX_MODE3 (3 << 24)
+#define GEMINI_IDE_IOMUX_SHIFT (24)
+#define GEMINI_IDE_PADS_ENABLE BIT(4)
+#define GEMINI_PFLASH_PADS_DISABLE BIT(1)
+
+/*
+ * Registers directly controlling the PATA<->SATA adapters
+ */
+#define GEMINI_SATA_ID 0x00
+#define GEMINI_SATA_PHY_ID 0x04
+#define GEMINI_SATA0_STATUS 0x08
+#define GEMINI_SATA1_STATUS 0x0c
+#define GEMINI_SATA0_CTRL 0x18
+#define GEMINI_SATA1_CTRL 0x1c
+
+#define GEMINI_SATA_STATUS_BIST_DONE BIT(5)
+#define GEMINI_SATA_STATUS_BIST_OK BIT(4)
+#define GEMINI_SATA_STATUS_PHY_READY BIT(0)
+
+#define GEMINI_SATA_CTRL_PHY_BIST_EN BIT(14)
+#define GEMINI_SATA_CTRL_PHY_FORCE_IDLE BIT(13)
+#define GEMINI_SATA_CTRL_PHY_FORCE_READY BIT(12)
+#define GEMINI_SATA_CTRL_PHY_AFE_LOOP_EN BIT(10)
+#define GEMINI_SATA_CTRL_PHY_DIG_LOOP_EN BIT(9)
+#define GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN BIT(4)
+#define GEMINI_SATA_CTRL_ATAPI_EN BIT(3)
+#define GEMINI_SATA_CTRL_BUS_WITH_20 BIT(2)
+#define GEMINI_SATA_CTRL_SLAVE_EN BIT(1)
+#define GEMINI_SATA_CTRL_EN BIT(0)
+
+/*
+ * There is only ever one instance of this bridge on a system,
+ * so create a singleton so that the FTIDE010 instances can grab
+ * a reference to it.
+ */
+static struct sata_gemini *sg_singleton;
+
+struct sata_gemini *gemini_sata_bridge_get(void)
+{
+ if (sg_singleton)
+ return sg_singleton;
+ return ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL(gemini_sata_bridge_get);
+
+bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1)
+{
+ if (!sg->sata_bridge)
+ return false;
+ /*
+ * In muxmode 2 and 3 one of the ATA controllers is
+ * actually not connected to any SATA bridge.
+ */
+ if ((sg->muxmode == GEMINI_MUXMODE_2) &&
+ !is_ata1)
+ return false;
+ if ((sg->muxmode == GEMINI_MUXMODE_3) &&
+ is_ata1)
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL(gemini_sata_bridge_enabled);
+
+enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg)
+{
+ return sg->muxmode;
+}
+EXPORT_SYMBOL(gemini_sata_get_muxmode);
+
+static int gemini_sata_setup_bridge(struct sata_gemini *sg,
+ unsigned int bridge)
+{
+ unsigned long timeout = jiffies + (HZ * 1);
+ bool bridge_online;
+ u32 val;
+
+ if (bridge == 0) {
+ val = GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN | GEMINI_SATA_CTRL_EN;
+ /* SATA0 slave mode is only used in muxmode 2 */
+ if (sg->muxmode == GEMINI_MUXMODE_2)
+ val |= GEMINI_SATA_CTRL_SLAVE_EN;
+ writel(val, sg->base + GEMINI_SATA0_CTRL);
+ } else {
+ val = GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN | GEMINI_SATA_CTRL_EN;
+ /* SATA1 slave mode is only used in muxmode 3 */
+ if (sg->muxmode == GEMINI_MUXMODE_3)
+ val |= GEMINI_SATA_CTRL_SLAVE_EN;
+ writel(val, sg->base + GEMINI_SATA1_CTRL);
+ }
+
+ /* Vendor code waits 10 ms here */
+ msleep(10);
+
+ /* Wait for PHY to become ready */
+ do {
+ msleep(100);
+
+ if (bridge == 0)
+ val = readl(sg->base + GEMINI_SATA0_STATUS);
+ else
+ val = readl(sg->base + GEMINI_SATA1_STATUS);
+ if (val & GEMINI_SATA_STATUS_PHY_READY)
+ break;
+ } while (time_before(jiffies, timeout));
+
+ bridge_online = !!(val & GEMINI_SATA_STATUS_PHY_READY);
+
+ dev_info(sg->dev, "SATA%d PHY %s\n", bridge,
+ bridge_online ? "ready" : "not ready");
+
+ return bridge_online ? 0: -ENODEV;
+}
+
+int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge)
+{
+ struct clk *pclk;
+ int ret;
+
+ if (bridge == 0)
+ pclk = sg->sata0_pclk;
+ else
+ pclk = sg->sata1_pclk;
+ clk_enable(pclk);
+ msleep(10);
+
+ /* Do not keep clocking a bridge that is not online */
+ ret = gemini_sata_setup_bridge(sg, bridge);
+ if (ret)
+ clk_disable(pclk);
+
+ return ret;
+}
+EXPORT_SYMBOL(gemini_sata_start_bridge);
+
+void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge)
+{
+ if (bridge == 0)
+ clk_disable(sg->sata0_pclk);
+ else if (bridge == 1)
+ clk_disable(sg->sata1_pclk);
+}
+EXPORT_SYMBOL(gemini_sata_stop_bridge);
+
+int gemini_sata_reset_bridge(struct sata_gemini *sg,
+ unsigned int bridge)
+{
+ if (bridge == 0)
+ reset_control_reset(sg->sata0_reset);
+ else
+ reset_control_reset(sg->sata1_reset);
+ msleep(10);
+ return gemini_sata_setup_bridge(sg, bridge);
+}
+EXPORT_SYMBOL(gemini_sata_reset_bridge);
+
+static int gemini_sata_bridge_init(struct sata_gemini *sg)
+{
+ struct device *dev = sg->dev;
+ u32 sata_id, sata_phy_id;
+ int ret;
+
+ sg->sata0_pclk = devm_clk_get(dev, "SATA0_PCLK");
+ if (IS_ERR(sg->sata0_pclk)) {
+ dev_err(dev, "no SATA0 PCLK");
+ return -ENODEV;
+ }
+ sg->sata1_pclk = devm_clk_get(dev, "SATA1_PCLK");
+ if (IS_ERR(sg->sata1_pclk)) {
+ dev_err(dev, "no SATA1 PCLK");
+ return -ENODEV;
+ }
+
+ ret = clk_prepare_enable(sg->sata0_pclk);
+ if (ret) {
+ pr_err("failed to enable SATA0 PCLK\n");
+ return ret;
+ }
+ ret = clk_prepare_enable(sg->sata1_pclk);
+ if (ret) {
+ pr_err("failed to enable SATA1 PCLK\n");
+ clk_disable_unprepare(sg->sata0_pclk);
+ return ret;
+ }
+
+ sg->sata0_reset = devm_reset_control_get(dev, "sata0");
+ if (IS_ERR(sg->sata0_reset)) {
+ dev_err(dev, "no SATA0 reset controller\n");
+ clk_disable_unprepare(sg->sata1_pclk);
+ clk_disable_unprepare(sg->sata0_pclk);
+ return PTR_ERR(sg->sata0_reset);
+ }
+ sg->sata1_reset = devm_reset_control_get(dev, "sata1");
+ if (IS_ERR(sg->sata1_reset)) {
+ dev_err(dev, "no SATA1 reset controller\n");
+ clk_disable_unprepare(sg->sata1_pclk);
+ clk_disable_unprepare(sg->sata0_pclk);
+ return PTR_ERR(sg->sata1_reset);
+ }
+
+ sata_id = readl(sg->base + GEMINI_SATA_ID);
+ sata_phy_id = readl(sg->base + GEMINI_SATA_PHY_ID);
+ sg->sata_bridge = true;
+ clk_disable(sg->sata0_pclk);
+ clk_disable(sg->sata1_pclk);
+
+ dev_info(dev, "SATA ID %08x, PHY ID: %08x\n", sata_id, sata_phy_id);
+
+ return 0;
+}
+
+static int gemini_sata_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct sata_gemini *sg;
+ static struct regmap *map;
+ struct resource *res;
+ enum gemini_muxmode muxmode;
+ u32 gmode;
+ u32 gmask;
+ u32 val;
+ int ret;
+
+ sg = devm_kzalloc(dev, sizeof(*sg), GFP_KERNEL);
+ if (!sg)
+ return -ENOMEM;
+ sg->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ sg->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(sg->base))
+ return PTR_ERR(sg->base);
+
+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(map)) {
+ dev_err(dev, "no global syscon\n");
+ return PTR_ERR(map);
+ }
+
+ /* Set up the SATA bridge if need be */
+ if (of_property_read_bool(np, "cortina,gemini-enable-sata-bridge")) {
+ ret = gemini_sata_bridge_init(sg);
+ if (ret)
+ return ret;
+ }
+
+ if (of_property_read_bool(np, "cortina,gemini-enable-ide-pins"))
+ sg->ide_pins = true;
+
+ if (!sg->sata_bridge && !sg->ide_pins) {
+ dev_err(dev, "neither SATA bridge or IDE output enabled\n");
+ ret = -EINVAL;
+ goto out_unprep_clk;
+ }
+
+ ret = of_property_read_u32(np, "cortina,gemini-ata-muxmode", &muxmode);
+ if (ret) {
+ dev_err(dev, "could not parse ATA muxmode\n");
+ goto out_unprep_clk;
+ }
+ if (muxmode > GEMINI_MUXMODE_3) {
+ dev_err(dev, "illegal muxmode %d\n", muxmode);
+ ret = -EINVAL;
+ goto out_unprep_clk;
+ }
+ sg->muxmode = muxmode;
+ gmask = GEMINI_IDE_IOMUX_MASK;
+ gmode = (muxmode << GEMINI_IDE_IOMUX_SHIFT);
+
+ /*
+ * If we mux out the IDE, parallel flash must be disabled.
+ * SATA0 and SATA1 have dedicated pins and may coexist with
+ * parallel flash.
+ */
+ if (sg->ide_pins)
+ gmode |= GEMINI_IDE_PADS_ENABLE | GEMINI_PFLASH_PADS_DISABLE;
+ else
+ gmask |= GEMINI_IDE_PADS_ENABLE;
+
+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, gmask, gmode);
+ if (ret) {
+ dev_err(dev, "unable to set up IDE muxing\n");
+ ret = -ENODEV;
+ goto out_unprep_clk;
+ }
+
+ /* FIXME: add more elaborate IDE skew control handling */
+ if (sg->ide_pins) {
+ ret = regmap_read(map, GEMINI_GLOBAL_IDE_SKEW_CTRL, &val);
+ if (ret) {
+ dev_err(dev, "cannot read IDE skew control register\n");
+ return ret;
+ }
+ dev_info(dev, "IDE skew control: %08x\n", val);
+ }
+
+ dev_info(dev, "set up the Gemini IDE/SATA nexus\n");
+ platform_set_drvdata(pdev, sg);
+ sg_singleton = sg;
+
+ return 0;
+
+out_unprep_clk:
+ if (sg->sata_bridge) {
+ clk_unprepare(sg->sata1_pclk);
+ clk_unprepare(sg->sata0_pclk);
+ }
+ return ret;
+}
+
+static int gemini_sata_remove(struct platform_device *pdev)
+{
+ struct sata_gemini *sg = platform_get_drvdata(pdev);
+
+ if (sg->sata_bridge) {
+ clk_unprepare(sg->sata1_pclk);
+ clk_unprepare(sg->sata0_pclk);
+ }
+ sg_singleton = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id gemini_sata_of_match[] = {
+ {
+ .compatible = "cortina,gemini-sata-bridge",
+ },
+ {},
+};
+
+static struct platform_driver gemini_sata_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(gemini_sata_of_match),
+ },
+ .probe = gemini_sata_probe,
+ .remove = gemini_sata_remove,
+};
+module_platform_driver(gemini_sata_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/sata_gemini.h b/drivers/ata/sata_gemini.h
new file mode 100644
index 000000000000..ca1837a394c8
--- /dev/null
+++ b/drivers/ata/sata_gemini.h
@@ -0,0 +1,21 @@
+/* Header for the Gemini SATA bridge */
+#ifndef SATA_GEMINI_H
+#define SATA_GEMINI_H
+
+struct sata_gemini;
+
+enum gemini_muxmode {
+ GEMINI_MUXMODE_0 = 0,
+ GEMINI_MUXMODE_1,
+ GEMINI_MUXMODE_2,
+ GEMINI_MUXMODE_3,
+};
+
+struct sata_gemini *gemini_sata_bridge_get(void);
+bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1);
+enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg);
+int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge);
+void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge);
+int gemini_sata_reset_bridge(struct sata_gemini *sg, unsigned int bridge);
+
+#endif
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index e81a8217f1ff..9b6d7930d1c7 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -737,7 +737,7 @@ static struct ata_port_operations inic_port_ops = {
.port_start = inic_port_start,
};
-static struct ata_port_info inic_port_info = {
+static const struct ata_port_info inic_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index b7939a2c1fab..ee9844758736 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -828,7 +828,7 @@ static void sata_rcar_init_controller(struct ata_host *host)
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
}
-static struct of_device_id sata_rcar_match[] = {
+static const struct of_device_id sata_rcar_match[] = {
{
/* Deprecated by "renesas,sata-r8a7779" */
.compatible = "renesas,rcar-sata",
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 22e96fc77d09..93b8d783936a 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -80,6 +80,10 @@ struct svia_priv {
bool wd_workaround;
};
+static int vt6420_hotplug;
+module_param_named(vt6420_hotplug, vt6420_hotplug, int, 0644);
+MODULE_PARM_DESC(vt6420_hotplug, "Enable hot-plug support for VT6420 (0=Don't support, 1=support)");
+
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM_SLEEP
static int svia_pci_device_resume(struct pci_dev *pdev);
@@ -166,7 +170,7 @@ static const struct ata_port_info vt6420_port_info = {
.port_ops = &vt6420_sata_ops,
};
-static struct ata_port_info vt6421_sport_info = {
+static const struct ata_port_info vt6421_sport_info = {
.flags = ATA_FLAG_SATA,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -174,7 +178,7 @@ static struct ata_port_info vt6421_sport_info = {
.port_ops = &vt6421_sata_ops,
};
-static struct ata_port_info vt6421_pport_info = {
+static const struct ata_port_info vt6421_pport_info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
/* No MWDMA */
@@ -182,7 +186,7 @@ static struct ata_port_info vt6421_pport_info = {
.port_ops = &vt6421_pata_ops,
};
-static struct ata_port_info vt8251_port_info = {
+static const struct ata_port_info vt8251_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
@@ -473,6 +477,11 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
struct ata_host *host;
int rc;
+ if (vt6420_hotplug) {
+ ppi[0]->port_ops->scr_read = svia_scr_read;
+ ppi[0]->port_ops->scr_write = svia_scr_write;
+ }
+
rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@@ -556,7 +565,7 @@ static void svia_wd_fix(struct pci_dev *pdev)
pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2));
}
-static irqreturn_t vt6421_interrupt(int irq, void *dev_instance)
+static irqreturn_t vt642x_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance);
@@ -644,7 +653,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
- if (board_id == vt6421) {
+ if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421) {
/* enable IRQ on hotplug */
pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
@@ -744,8 +753,8 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
svia_configure(pdev, board_id, hpriv);
pci_set_master(pdev);
- if (board_id == vt6421)
- return ata_host_activate(host, pdev->irq, vt6421_interrupt,
+ if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421)
+ return ata_host_activate(host, pdev->irq, vt642x_interrupt,
IRQF_SHARED, &svia_sht);
else
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b6bb4e0ce0e3..8796d908fcdd 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -50,6 +50,7 @@
#include <linux/string_helpers.h>
#include <linux/async.h>
#include <linux/slab.h>
+#include <linux/sed-opal.h>
#include <linux/pm_runtime.h>
#include <linux/pr.h>
#include <linux/t10-pi.h>
@@ -643,6 +644,26 @@ static void scsi_disk_put(struct scsi_disk *sdkp)
mutex_unlock(&sd_ref_mutex);
}
+#ifdef CONFIG_BLK_SED_OPAL
+static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
+ size_t len, bool send)
+{
+ struct scsi_device *sdev = data;
+ u8 cdb[12] = { 0, };
+ int ret;
+
+ cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
+ cdb[1] = secp;
+ put_unaligned_be16(spsp, &cdb[2]);
+ put_unaligned_be32(len, &cdb[6]);
+
+ ret = scsi_execute_req(sdev, cdb,
+ send ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
+ buffer, len, NULL, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
+ return ret <= 0 ? ret : -EIO;
+}
+#endif /* CONFIG_BLK_SED_OPAL */
+
static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
unsigned int dix, unsigned int dif)
{
@@ -1454,6 +1475,9 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
if (error)
goto out;
+ if (is_sed_ioctl(cmd))
+ return sed_ioctl(sdkp->opal_dev, cmd, p);
+
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to block level and then onto mid level if they can't be
@@ -3014,6 +3038,20 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
sdkp->ws10 = 1;
}
+static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+ struct scsi_device *sdev = sdkp->device;
+
+ if (!sdev->security_supported)
+ return;
+
+ if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
+ SECURITY_PROTOCOL_IN) == 1 &&
+ scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
+ SECURITY_PROTOCOL_OUT) == 1)
+ sdkp->security = 1;
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -3067,6 +3105,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
sd_read_write_same(sdkp, buffer);
+ sd_read_security(sdkp, buffer);
}
sdkp->first_scan = 0;
@@ -3227,6 +3266,12 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
sd_revalidate_disk(gd);
+ if (sdkp->security) {
+ sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit);
+ if (sdkp->opal_dev)
+ sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n");
+ }
+
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
scsi_autopm_put_device(sdp);
@@ -3376,6 +3421,8 @@ static int sd_remove(struct device *dev)
sd_zbc_remove(sdkp);
+ free_opal_dev(sdkp->opal_dev);
+
blk_register_region(devt, SD_MINORS, NULL,
sd_default_probe, NULL, NULL);
@@ -3528,6 +3575,7 @@ static int sd_suspend_runtime(struct device *dev)
static int sd_resume(struct device *dev)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
+ int ret;
if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
return 0;
@@ -3536,7 +3584,10 @@ static int sd_resume(struct device *dev)
return 0;
sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
- return sd_start_stop_device(sdkp, 1);
+ ret = sd_start_stop_device(sdkp, 1);
+ if (!ret)
+ opal_unlock_from_suspend(sdkp->opal_dev);
+ return ret;
}
/**
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 61d02efd366c..99c4dde9b6bf 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -71,6 +71,7 @@ struct scsi_disk {
struct scsi_device *device;
struct device dev;
struct gendisk *disk;
+ struct opal_dev *opal_dev;
#ifdef CONFIG_BLK_DEV_ZONED
unsigned int nr_zones;
unsigned int zone_blocks;
@@ -114,6 +115,7 @@ struct scsi_disk {
unsigned rc_basis: 2;
unsigned zoned: 2;
unsigned urswrz : 1;
+ unsigned security : 1;
unsigned ignore_medium_access_errors : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 73fe18edfdaf..e65ae4b2ed48 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -336,11 +336,16 @@ enum {
/* READ_LOG_EXT pages */
ATA_LOG_DIRECTORY = 0x0,
ATA_LOG_SATA_NCQ = 0x10,
- ATA_LOG_NCQ_NON_DATA = 0x12,
- ATA_LOG_NCQ_SEND_RECV = 0x13,
- ATA_LOG_SATA_ID_DEV_DATA = 0x30,
+ ATA_LOG_NCQ_NON_DATA = 0x12,
+ ATA_LOG_NCQ_SEND_RECV = 0x13,
+ ATA_LOG_IDENTIFY_DEVICE = 0x30,
+
+ /* Identify device log pages: */
+ ATA_LOG_SECURITY = 0x06,
ATA_LOG_SATA_SETTINGS = 0x08,
ATA_LOG_ZONED_INFORMATION = 0x09,
+
+ /* Identify device SATA settings log:*/
ATA_LOG_DEVSLP_OFFSET = 0x30,
ATA_LOG_DEVSLP_SIZE = 0x08,
ATA_LOG_DEVSLP_MDAT = 0x00,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9e6633235ad7..55de3da58b1c 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -156,6 +156,7 @@ enum {
ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */
ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */
ATA_DFLAG_AN = (1 << 7), /* AN configured */
+ ATA_DFLAG_TRUSTED = (1 << 8), /* device supports trusted send/recv */
ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */
ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 05641aebd181..310c86a892e9 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -176,6 +176,7 @@ struct scsi_device {
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
+ unsigned security_supported:1; /* Supports Security Protocols */
unsigned is_visible:1; /* is the device visible in sysfs */
unsigned wce_default_on:1; /* Cache is ON by default */
unsigned no_dif:1; /* T10 PI (DIF) should be disabled */
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
index ce78ec8e367d..06076b88d375 100644
--- a/include/scsi/scsi_proto.h
+++ b/include/scsi/scsi_proto.h
@@ -162,6 +162,7 @@
#define VERIFY_32 0x0a
#define WRITE_32 0x0b
#define WRITE_SAME_32 0x0d
+#define ATA_32 0x1ff0
/* Values for T10/04-262r7 */
#define ATA_16 0x85 /* 16-byte pass-thru */