diff options
| -rw-r--r-- | Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt | 40 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/Kconfig | 9 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/mpc8xxx_gpio.c | 171 |
4 files changed, 221 insertions, 0 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt new file mode 100644 index 000000000000..d015dcec4011 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt @@ -0,0 +1,40 @@ +GPIO controllers on MPC8xxx SoCs + +This is for the non-QE/CPM/GUTs GPIO controllers as found on +8349, 8572, 8610 and compatible. + +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +Required properties: +- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for + 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + - interrupts : Interrupt mapping for GPIO IRQ (currently unused). + - interrupt-parent : Phandle for the interrupt controller that + services interrupts for this device. +- gpio-controller : Marks the port as GPIO controller. + +Example of gpio-controller nodes for a MPC8347 SoC: + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + +See booting-without-of.txt for details of how to specify GPIO +information for devices. diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 396582835cb5..d0e7bb05c3a4 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -7,6 +7,15 @@ config PPC4xx_PCI_EXPRESS depends on PCI && 4xx default n +config MPC8xxx_GPIO + bool "MPC8xxx GPIO support" + depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here if you're going to use hardware that connects to the + MPC831x/834x/837x/8572/8610 GPIOs. + config PPC_MSI_BITMAP bool depends on PCI_MSI diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index b6c269eb2650..55618ba9eff0 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o +obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c new file mode 100644 index 000000000000..103eace36194 --- /dev/null +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -0,0 +1,171 @@ +/* + * GPIOs on MPC8349/8572/8610 and compatible + * + * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> + +#define MPC8XXX_GPIO_PINS 32 + +#define GPIO_DIR 0x00 +#define GPIO_ODR 0x04 +#define GPIO_DAT 0x08 +#define GPIO_IER 0x0c +#define GPIO_IMR 0x10 +#define GPIO_ICR 0x14 + +struct mpc8xxx_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* + * shadowed data register to be able to clear/set output pins in + * open drain mode safely + */ + u32 data; +}; + +static inline u32 mpc8xxx_gpio2mask(unsigned int gpio) +{ + return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio); +} + +static inline struct mpc8xxx_gpio_chip * +to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm) +{ + return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc); +} + +static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + + mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT); +} + +static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + + return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio); +} + +static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + unsigned long flags; + + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + if (val) + mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio); + else + mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio); + + out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data); + + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); +} + +static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + unsigned long flags; + + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio)); + + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + + return 0; +} + +static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + unsigned long flags; + + mpc8xxx_gpio_set(gc, gpio, val); + + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + + setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio)); + + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + + return 0; +} + +static void __init mpc8xxx_add_controller(struct device_node *np) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + int ret; + + mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL); + if (!mpc8xxx_gc) { + ret = -ENOMEM; + goto err; + } + + spin_lock_init(&mpc8xxx_gc->lock); + + mm_gc = &mpc8xxx_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = mpc8xxx_gpio_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = MPC8XXX_GPIO_PINS; + gc->direction_input = mpc8xxx_gpio_dir_in; + gc->direction_output = mpc8xxx_gpio_dir_out; + gc->get = mpc8xxx_gpio_get; + gc->set = mpc8xxx_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + + return; + +err: + pr_err("%s: registration failed with status %d\n", + np->full_name, ret); + kfree(mpc8xxx_gc); + + return; +} + +static int __init mpc8xxx_add_gpiochips(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio") + mpc8xxx_add_controller(np); + + for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio") + mpc8xxx_add_controller(np); + + for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") + mpc8xxx_add_controller(np); + + return 0; +} +arch_initcall(mpc8xxx_add_gpiochips); |