diff options
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index 64d8f56a9c17..b3fe0575ff6b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -172,6 +172,7 @@ enum inter_frame_gap { /* GMAC FLOW CTRL defines */ #define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ #define GMAC_FLOW_CTRL_PT_SHIFT 16 +#define GMAC_FLOW_CTRL_UP 0x00000008 /* Unicast pause frame enable */ #define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ #define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ #define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ @@ -246,6 +247,56 @@ enum ttc_control { #define DMA_CONTROL_FEF 0x00000080 #define DMA_CONTROL_FUF 0x00000040 +/* Receive flow control activation field + * RFA field in DMA control register, bits 23,10:9 + */ +#define DMA_CONTROL_RFA_MASK 0x00800600 + +/* Receive flow control deactivation field + * RFD field in DMA control register, bits 22,12:11 + */ +#define DMA_CONTROL_RFD_MASK 0x00401800 + +/* RFD and RFA fields are encoded as follows + * + * Bit Field + * 0,00 - Full minus 1KB (only valid when rxfifo >= 4KB and EFC enabled) + * 0,01 - Full minus 2KB (only valid when rxfifo >= 4KB and EFC enabled) + * 0,10 - Full minus 3KB (only valid when rxfifo >= 4KB and EFC enabled) + * 0,11 - Full minus 4KB (only valid when rxfifo > 4KB and EFC enabled) + * 1,00 - Full minus 5KB (only valid when rxfifo > 8KB and EFC enabled) + * 1,01 - Full minus 6KB (only valid when rxfifo > 8KB and EFC enabled) + * 1,10 - Full minus 7KB (only valid when rxfifo > 8KB and EFC enabled) + * 1,11 - Reserved + * + * RFD should always be > RFA for a given FIFO size. RFD == RFA may work, + * but packet throughput performance may not be as expected. + * + * Be sure that bit 3 in GMAC Register 6 is set for Unicast Pause frame + * detection (IEEE Specification Requirement, Annex 31B, 31B.1, Pause + * Description). + * + * Be sure that DZPA (bit 7 in Flow Control Register, GMAC Register 6), + * is set to 0. This allows pause frames with a quanta of 0 to be sent + * as an XOFF message to the link peer. + */ + +#define RFA_FULL_MINUS_1K 0x00000000 +#define RFA_FULL_MINUS_2K 0x00000200 +#define RFA_FULL_MINUS_3K 0x00000400 +#define RFA_FULL_MINUS_4K 0x00000600 +#define RFA_FULL_MINUS_5K 0x00800000 +#define RFA_FULL_MINUS_6K 0x00800200 +#define RFA_FULL_MINUS_7K 0x00800400 + +#define RFD_FULL_MINUS_1K 0x00000000 +#define RFD_FULL_MINUS_2K 0x00000800 +#define RFD_FULL_MINUS_3K 0x00001000 +#define RFD_FULL_MINUS_4K 0x00001800 +#define RFD_FULL_MINUS_5K 0x00400000 +#define RFD_FULL_MINUS_6K 0x00400800 +#define RFD_FULL_MINUS_7K 0x00401000 + enum rtc_control { DMA_CONTROL_RTC_64 = 0x00000000, DMA_CONTROL_RTC_32 = 0x00000008, |