diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/tps65090.txt | 4 | ||||
| -rw-r--r-- | drivers/regulator/tps65090-regulator.c | 56 | ||||
| -rw-r--r-- | include/linux/mfd/tps65090.h | 5 |
3 files changed, 65 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt index 313a60ba61d8..340980239ea9 100644 --- a/Documentation/devicetree/bindings/regulator/tps65090.txt +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -21,6 +21,10 @@ Optional properties: number should be provided. If it is externally controlled and no GPIO entry then driver will just configure this rails as external control and will not provide any enable/disable APIs. +- ti,overcurrent-wait: This is applicable to FET registers, which have a + poorly defined "overcurrent wait" field. If this property is present it + should be between 0 - 3. If this property isn't present we won't touch the + "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with. Each regulator is defined using the standard binding for regulators. diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c index 2e92ef68574d..ca04e9f010e1 100644 --- a/drivers/regulator/tps65090-regulator.c +++ b/drivers/regulator/tps65090-regulator.c @@ -28,15 +28,58 @@ #include <linux/regulator/of_regulator.h> #include <linux/mfd/tps65090.h> +#define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */ + +#define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */ + +/** + * struct tps65090_regulator - Per-regulator data for a tps65090 regulator + * + * @dev: Pointer to our device. + * @desc: The struct regulator_desc for the regulator. + * @rdev: The struct regulator_dev for the regulator. + * @overcurrent_wait_valid: True if overcurrent_wait is valid. + * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield. + */ + struct tps65090_regulator { struct device *dev; struct regulator_desc *desc; struct regulator_dev *rdev; + bool overcurrent_wait_valid; + int overcurrent_wait; }; static struct regulator_ops tps65090_ext_control_ops = { }; +/** + * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait + * + * This will set the overcurrent wait time based on what's in the regulator + * info. + * + * @ri: Overall regulator data + * @rdev: Regulator device + * + * Return: 0 if no error, non-zero if there was an error writing the register. + */ +static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri, + struct regulator_dev *rdev) +{ + int ret; + + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + MAX_OVERCURRENT_WAIT << CTRL_WT_BIT, + ri->overcurrent_wait << CTRL_WT_BIT); + if (ret) { + dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n", + rdev->desc->enable_reg); + } + + return ret; +} + static struct regulator_ops tps65090_reg_contol_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -209,6 +252,11 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data( rpdata->gpio = of_get_named_gpio(np, "dcdc-ext-control-gpios", 0); + if (of_property_read_u32(tps65090_matches[idx].of_node, + "ti,overcurrent-wait", + &rpdata->overcurrent_wait) == 0) + rpdata->overcurrent_wait_valid = true; + tps65090_pdata->reg_pdata[idx] = rpdata; } return tps65090_pdata; @@ -258,6 +306,8 @@ static int tps65090_regulator_probe(struct platform_device *pdev) ri = &pmic[num]; ri->dev = &pdev->dev; ri->desc = &tps65090_regulator_desc[num]; + ri->overcurrent_wait_valid = tps_pdata->overcurrent_wait_valid; + ri->overcurrent_wait = tps_pdata->overcurrent_wait; /* * TPS5090 DCDC support the control from external digital input. @@ -299,6 +349,12 @@ static int tps65090_regulator_probe(struct platform_device *pdev) } ri->rdev = rdev; + if (ri->overcurrent_wait_valid) { + ret = tps65090_reg_set_overcurrent_wait(ri, rdev); + if (ret < 0) + return ret; + } + /* Enable external control if it is require */ if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data && tps_pdata->enable_ext_control) { diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 3f43069413e7..f25adfa97c73 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -78,11 +78,16 @@ struct tps65090 { * DCDC1, DCDC2 and DCDC3. * @gpio: Gpio number if external control is enabled and controlled through * gpio. + * @overcurrent_wait_valid: True if the overcurrent_wait should be applied. + * @overcurrent_wait: Value to set as the overcurrent wait time. This is the + * actual bitfield value, not a time in ms (valid value are 0 - 3). */ struct tps65090_regulator_plat_data { struct regulator_init_data *reg_init_data; bool enable_ext_control; int gpio; + bool overcurrent_wait_valid; + int overcurrent_wait; }; struct tps65090_platform_data { |