diff options
| -rw-r--r-- | MAINTAINERS | 5 | ||||
| -rw-r--r-- | drivers/net/dsa/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/dsa/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/dsa/mv88e6352.c | 464 | ||||
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx.c | 3 | ||||
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx.h | 7 |
6 files changed, 490 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 43898b1a8a2d..e4082ec8daeb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5848,6 +5848,11 @@ M: Russell King <rmk+kernel@arm.linux.org.uk> S: Maintained F: drivers/gpu/drm/armada/ +MARVELL 88E6352 DSA support +M: Guenter Roeck <linux@roeck-us.net> +S: Maintained +F: drivers/net/dsa/mv88e6352.c + MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2) M: Mirko Lindner <mlindner@marvell.com> M: Stephen Hemminger <stephen@networkplumber.org> diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 9234d808cbb3..0987c336e517 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -45,6 +45,14 @@ config NET_DSA_MV88E6171 This enables support for the Marvell 88E6171 ethernet switch chip. +config NET_DSA_MV88E6352 + tristate "Marvell 88E6352 ethernet switch chip support" + select NET_DSA + select NET_DSA_MV88E6XXX + select NET_DSA_TAG_EDSA + ---help--- + This enables support for the Marvell 88E6352 ethernet switch chip. + config NET_DSA_BCM_SF2 tristate "Broadcom Starfighter 2 Ethernet switch support" depends on HAS_IOMEM diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 23a90de9830e..e2d51c4b9382 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -7,6 +7,9 @@ endif ifdef CONFIG_NET_DSA_MV88E6131 mv88e6xxx_drv-y += mv88e6131.o endif +ifdef CONFIG_NET_DSA_MV88E6352 +mv88e6xxx_drv-y += mv88e6352.o +endif ifdef CONFIG_NET_DSA_MV88E6171 mv88e6xxx_drv-y += mv88e6171.o endif diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c new file mode 100644 index 000000000000..43a58262a03d --- /dev/null +++ b/drivers/net/dsa/mv88e6352.c @@ -0,0 +1,464 @@ +/* + * net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support + * + * Copyright (c) 2014 Guenter Roeck + * + * Derived from mv88e6123_61_65.c + * Copyright (c) 2008-2009 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <net/dsa.h> +#include "mv88e6xxx.h" + +static int mv88e6352_phy_wait(struct dsa_switch *ds) +{ + unsigned long timeout = jiffies + HZ / 10; + + while (time_before(jiffies, timeout)) { + int ret; + + ret = REG_READ(REG_GLOBAL2, 0x18); + if (ret < 0) + return ret; + + if (!(ret & 0x8000)) + return 0; + + usleep_range(1000, 2000); + } + return -ETIMEDOUT; +} + +static int __mv88e6352_phy_read(struct dsa_switch *ds, int addr, int regnum) +{ + int ret; + + REG_WRITE(REG_GLOBAL2, 0x18, 0x9800 | (addr << 5) | regnum); + + ret = mv88e6352_phy_wait(ds); + if (ret < 0) + return ret; + + return REG_READ(REG_GLOBAL2, 0x19); +} + +static int __mv88e6352_phy_write(struct dsa_switch *ds, int addr, int regnum, + u16 val) +{ + REG_WRITE(REG_GLOBAL2, 0x19, val); + REG_WRITE(REG_GLOBAL2, 0x18, 0x9400 | (addr << 5) | regnum); + + return mv88e6352_phy_wait(ds); +} + +static char *mv88e6352_probe(struct device *host_dev, int sw_addr) +{ + struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev); + int ret; + + if (bus == NULL) + return NULL; + + ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); + if (ret >= 0) { + if (ret == 0x3521) + return "Marvell 88E6352 (A0)"; + if (ret == 0x3522) + return "Marvell 88E6352 (A1)"; + if ((ret & 0xfff0) == 0x3520) + return "Marvell 88E6352"; + } + + return NULL; +} + +static int mv88e6352_switch_reset(struct dsa_switch *ds) +{ + unsigned long timeout; + int ret; + int i; + + /* Set all ports to the disabled state. */ + for (i = 0; i < 7; i++) { + ret = REG_READ(REG_PORT(i), 0x04); + REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); + } + + /* Wait for transmit queues to drain. */ + usleep_range(2000, 4000); + + /* Reset the switch. Keep PPU active (bit 14, undocumented). + * The PPU needs to be active to support indirect phy register + * accesses through global registers 0x18 and 0x19. + */ + REG_WRITE(REG_GLOBAL, 0x04, 0xc000); + + /* Wait up to one second for reset to complete. */ + timeout = jiffies + 1 * HZ; + while (time_before(jiffies, timeout)) { + ret = REG_READ(REG_GLOBAL, 0x00); + if ((ret & 0x8800) == 0x8800) + break; + usleep_range(1000, 2000); + } + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + return 0; +} + +static int mv88e6352_setup_global(struct dsa_switch *ds) +{ + int ret; + int i; + + /* Discard packets with excessive collisions, + * mask all interrupt sources, enable PPU (bit 14, undocumented). + */ + REG_WRITE(REG_GLOBAL, 0x04, 0x6000); + + /* Set the default address aging time to 5 minutes, and + * enable address learn messages to be sent to all message + * ports. + */ + REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); + + /* Configure the priority mapping registers. */ + ret = mv88e6xxx_config_prio(ds); + if (ret < 0) + return ret; + + /* Configure the upstream port, and configure the upstream + * port as the port to which ingress and egress monitor frames + * are to be sent. + */ + REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); + + /* Disable remote management for now, and set the switch's + * DSA device number. + */ + REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f); + + /* Send all frames with destination addresses matching + * 01:80:c2:00:00:2x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x02, 0xffff); + + /* Send all frames with destination addresses matching + * 01:80:c2:00:00:0x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); + + /* Disable the loopback filter, disable flow control + * messages, disable flood broadcast override, disable + * removing of provider tags, disable ATU age violation + * interrupts, disable tag flow control, force flow + * control priority to the highest, and send all special + * multicast frames to the CPU at the highest priority. + */ + REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); + + /* Program the DSA routing table. */ + for (i = 0; i < 32; i++) { + int nexthop = 0x1f; + + if (i != ds->index && i < ds->dst->pd->nr_chips) + nexthop = ds->pd->rtable[i] & 0x1f; + + REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop); + } + + /* Clear all trunk masks. */ + for (i = 0; i < 8; i++) + REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f); + + /* Clear all trunk mappings. */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); + + /* Disable ingress rate limiting by resetting all ingress + * rate limit registers to their initial state. + */ + for (i = 0; i < 7; i++) + REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8)); + + /* Initialise cross-chip port VLAN table to reset defaults. */ + REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000); + + /* Clear the priority override table. */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8)); + + /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */ + + return 0; +} + +static int mv88e6352_setup_port(struct dsa_switch *ds, int p) +{ + int addr = REG_PORT(p); + u16 val; + + /* MAC Forcing register: don't force link, speed, duplex + * or flow control state to any particular values on physical + * ports, but force the CPU port and all DSA ports to 1000 Mb/s + * full duplex. + */ + if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) + REG_WRITE(addr, 0x01, 0x003e); + else + REG_WRITE(addr, 0x01, 0x0003); + + /* Do not limit the period of time that this port can be + * paused for by the remote end or the period of time that + * this port can pause the remote end. + */ + REG_WRITE(addr, 0x02, 0x0000); + + /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, + * disable Header mode, enable IGMP/MLD snooping, disable VLAN + * tunneling, determine priority by looking at 802.1p and IP + * priority fields (IP prio has precedence), and set STP state + * to Forwarding. + * + * If this is the CPU link, use DSA or EDSA tagging depending + * on which tagging mode was configured. + * + * If this is a link to another switch, use DSA tagging mode. + * + * If this is the upstream port for this switch, enable + * forwarding of unknown unicasts and multicasts. + */ + val = 0x0433; + if (dsa_is_cpu_port(ds, p)) { + if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA) + val |= 0x3300; + else + val |= 0x0100; + } + if (ds->dsa_port_mask & (1 << p)) + val |= 0x0100; + if (p == dsa_upstream_port(ds)) + val |= 0x000c; + REG_WRITE(addr, 0x04, val); + + /* Port Control 1: disable trunking. Also, if this is the + * CPU port, enable learn messages to be sent to this port. + */ + REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); + + /* Port based VLAN map: give each port its own address + * database, allow the CPU port to talk to each of the 'real' + * ports, and allow each of the 'real' ports to only talk to + * the upstream port. + */ + val = (p & 0xf) << 12; + if (dsa_is_cpu_port(ds, p)) + val |= ds->phys_port_mask; + else + val |= 1 << dsa_upstream_port(ds); + REG_WRITE(addr, 0x06, val); + + /* Default VLAN ID and priority: don't set a default VLAN + * ID, and set the default packet priority to zero. + */ + REG_WRITE(addr, 0x07, 0x0000); + + /* Port Control 2: don't force a good FCS, set the maximum + * frame size to 10240 bytes, don't let the switch add or + * strip 802.1q tags, don't discard tagged or untagged frames + * on this port, do a destination address lookup on all + * received packets as usual, disable ARP mirroring and don't + * send a copy of all transmitted/received frames on this port + * to the CPU. + */ + REG_WRITE(addr, 0x08, 0x2080); + + /* Egress rate control: disable egress rate control. */ + REG_WRITE(addr, 0x09, 0x0001); + + /* Egress rate control 2: disable egress rate control. */ + REG_WRITE(addr, 0x0a, 0x0000); + + /* Port Association Vector: when learning source addresses + * of packets, add the address to the address database using + * a port bitmap that has only the bit for this port set and + * the other bits clear. + */ + REG_WRITE(addr, 0x0b, 1 << p); + + /* Port ATU control: disable limiting the number of address + * database entries that this port is allowed to use. + */ + REG_WRITE(addr, 0x0c, 0x0000); + + /* Priority Override: disable DA, SA and VTU priority override. */ + REG_WRITE(addr, 0x0d, 0x0000); + + /* Port Ethertype: use the Ethertype DSA Ethertype value. */ + REG_WRITE(addr, 0x0f, ETH_P_EDSA); + + /* Tag Remap: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x18, 0x3210); + + /* Tag Remap 2: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x19, 0x7654); + + return 0; +} + +static int mv88e6352_setup(struct dsa_switch *ds) +{ + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); + int ret; + int i; + + mutex_init(&ps->smi_mutex); + mutex_init(&ps->stats_mutex); + mutex_init(&ps->phy_mutex); + + ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0; + + ret = mv88e6352_switch_reset(ds); + if (ret < 0) + return ret; + + /* @@@ initialise vtu and atu */ + + ret = mv88e6352_setup_global(ds); + if (ret < 0) + return ret; + + for (i = 0; i < 7; i++) { + ret = mv88e6352_setup_port(ds, i); + if (ret < 0) + return ret; + } + + return 0; +} + +static int mv88e6352_port_to_phy_addr(int port) +{ + if (port >= 0 && port <= 4) + return port; + return -EINVAL; +} + +static int +mv88e6352_phy_read(struct dsa_switch *ds, int port, int regnum) +{ + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); + int addr = mv88e6352_port_to_phy_addr(port); + int ret; + + if (addr < 0) + return addr; + + mutex_lock(&ps->phy_mutex); + ret = __mv88e6352_phy_read(ds, addr, regnum); + mutex_unlock(&ps->phy_mutex); + + return ret; +} + +static int +mv88e6352_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) +{ + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); + int addr = mv88e6352_port_to_phy_addr(port); + int ret; + + if (addr < 0) + return addr; + + mutex_lock(&ps->phy_mutex); + ret = __mv88e6352_phy_write(ds, addr, regnum, val); + mutex_unlock(&ps->phy_mutex); + + return ret; +} + +static struct mv88e6xxx_hw_stat mv88e6352_hw_stats[] = { + { "in_good_octets", 8, 0x00, }, + { "in_bad_octets", 4, 0x02, }, + { "in_unicast", 4, 0x04, }, + { "in_broadcasts", 4, 0x06, }, + { "in_multicasts", 4, 0x07, }, + { "in_pause", 4, 0x16, }, + { "in_undersize", 4, 0x18, }, + { "in_fragments", 4, 0x19, }, + { "in_oversize", 4, 0x1a, }, + { "in_jabber", 4, 0x1b, }, + { "in_rx_error", 4, 0x1c, }, + { "in_fcs_error", 4, 0x1d, }, + { "out_octets", 8, 0x0e, }, + { "out_unicast", 4, 0x10, }, + { "out_broadcasts", 4, 0x13, }, + { "out_multicasts", 4, 0x12, }, + { "out_pause", 4, 0x15, }, + { "excessive", 4, 0x11, }, + { "collisions", 4, 0x1e, }, + { "deferred", 4, 0x05, }, + { "single", 4, 0x14, }, + { "multiple", 4, 0x17, }, + { "out_fcs_error", 4, 0x03, }, + { "late", 4, 0x1f, }, + { "hist_64bytes", 4, 0x08, }, + { "hist_65_127bytes", 4, 0x09, }, + { "hist_128_255bytes", 4, 0x0a, }, + { "hist_256_511bytes", 4, 0x0b, }, + { "hist_512_1023bytes", 4, 0x0c, }, + { "hist_1024_max_bytes", 4, 0x0d, }, +}; + +static void +mv88e6352_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6352_hw_stats), + mv88e6352_hw_stats, port, data); +} + +static void +mv88e6352_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6352_hw_stats), + mv88e6352_hw_stats, port, data); +} + +static int mv88e6352_get_sset_count(struct dsa_switch *ds) +{ + return ARRAY_SIZE(mv88e6352_hw_stats); +} + +struct dsa_switch_driver mv88e6352_switch_driver = { + .tag_protocol = DSA_TAG_PROTO_EDSA, + .priv_size = sizeof(struct mv88e6xxx_priv_state), + .probe = mv88e6352_probe, + .setup = mv88e6352_setup, + .set_addr = mv88e6xxx_set_addr_indirect, + .phy_read = mv88e6352_phy_read, + .phy_write = mv88e6352_phy_write, + .poll_link = mv88e6xxx_poll_link, + .get_strings = mv88e6352_get_strings, + .get_ethtool_stats = mv88e6352_get_ethtool_stats, + .get_sset_count = mv88e6352_get_sset_count, +}; + +MODULE_ALIAS("platform:mv88e6352"); diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index a6c90cf5634d..8e1090ba3df3 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -507,6 +507,9 @@ static int __init mv88e6xxx_init(void) #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) register_switch_driver(&mv88e6123_61_65_switch_driver); #endif +#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352) + register_switch_driver(&mv88e6352_switch_driver); +#endif #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171) register_switch_driver(&mv88e6171_switch_driver); #endif diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h index 5e5145ad9525..c0ce133c756b 100644 --- a/drivers/net/dsa/mv88e6xxx.h +++ b/drivers/net/dsa/mv88e6xxx.h @@ -37,6 +37,12 @@ struct mv88e6xxx_priv_state { */ struct mutex stats_mutex; + /* This mutex serializes phy access for chips with + * indirect phy addressing. It is unused for chips + * with direct phy access. + */ + struct mutex phy_mutex; + int id; /* switch product id */ }; @@ -70,6 +76,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, extern struct dsa_switch_driver mv88e6131_switch_driver; extern struct dsa_switch_driver mv88e6123_61_65_switch_driver; +extern struct dsa_switch_driver mv88e6352_switch_driver; extern struct dsa_switch_driver mv88e6171_switch_driver; #define REG_READ(addr, reg) \ |