diff options
| -rw-r--r-- | drivers/net/bonding/bond_3ad.c | 619 |
1 files changed, 349 insertions, 270 deletions
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 539e24a1c86c..9828209ab492 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -34,14 +34,14 @@ #include "bonding.h" #include "bond_3ad.h" -// General definitions +/* General definitions */ #define AD_SHORT_TIMEOUT 1 #define AD_LONG_TIMEOUT 0 #define AD_STANDBY 0x2 #define AD_MAX_TX_IN_SECOND 3 #define AD_COLLECTOR_MAX_DELAY 0 -// Timer definitions(43.4.4 in the 802.3ad standard) +/* Timer definitions (43.4.4 in the 802.3ad standard) */ #define AD_FAST_PERIODIC_TIME 1 #define AD_SLOW_PERIODIC_TIME 30 #define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME) @@ -49,7 +49,7 @@ #define AD_CHURN_DETECTION_TIME 60 #define AD_AGGREGATE_WAIT_TIME 2 -// Port state definitions(43.4.2.2 in the 802.3ad standard) +/* Port state definitions (43.4.2.2 in the 802.3ad standard) */ #define AD_STATE_LACP_ACTIVITY 0x1 #define AD_STATE_LACP_TIMEOUT 0x2 #define AD_STATE_AGGREGATION 0x4 @@ -59,7 +59,9 @@ #define AD_STATE_DEFAULTED 0x40 #define AD_STATE_EXPIRED 0x80 -// Port Variables definitions used by the State Machines(43.4.7 in the 802.3ad standard) +/* Port Variables definitions used by the State Machines (43.4.7 in the + * 802.3ad standard) + */ #define AD_PORT_BEGIN 0x1 #define AD_PORT_LACP_ENABLED 0x2 #define AD_PORT_ACTOR_CHURN 0x4 @@ -71,24 +73,23 @@ #define AD_PORT_SELECTED 0x100 #define AD_PORT_MOVED 0x200 -// Port Key definitions -// key is determined according to the link speed, duplex and -// user key(which is yet not supported) -// ------------------------------------------------------------ -// Port key : | User key | Speed |Duplex| -// ------------------------------------------------------------ -// 16 6 1 0 +/* Port Key definitions + * key is determined according to the link speed, duplex and + * user key (which is yet not supported) + * -------------------------------------------------------------- + * Port key : | User key | Speed | Duplex | + * -------------------------------------------------------------- + * 16 6 1 0 + */ #define AD_DUPLEX_KEY_BITS 0x1 #define AD_SPEED_KEY_BITS 0x3E #define AD_USER_KEY_BITS 0xFFC0 -//dalloun #define AD_LINK_SPEED_BITMASK_1MBPS 0x1 #define AD_LINK_SPEED_BITMASK_10MBPS 0x2 #define AD_LINK_SPEED_BITMASK_100MBPS 0x4 #define AD_LINK_SPEED_BITMASK_1000MBPS 0x8 #define AD_LINK_SPEED_BITMASK_10000MBPS 0x10 -//endalloun /* compare MAC addresses */ #define MAC_ADDRESS_EQUAL(A, B) \ @@ -100,7 +101,7 @@ static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000; static const u8 lacpdu_mcast_addr[ETH_ALEN] = MULTICAST_LACPDU_ADDR; -// ================= main 802.3ad protocol functions ================== +/* ================= main 802.3ad protocol functions ================== */ static int ad_lacpdu_send(struct port *port); static int ad_marker_send(struct port *port, struct bond_marker *marker); static void ad_mux_machine(struct port *port); @@ -114,13 +115,13 @@ static void ad_initialize_agg(struct aggregator *aggregator); static void ad_initialize_port(struct port *port, int lacp_fast); static void ad_enable_collecting_distributing(struct port *port); static void ad_disable_collecting_distributing(struct port *port); -static void ad_marker_info_received(struct bond_marker *marker_info, struct port *port); -static void ad_marker_response_received(struct bond_marker *marker, struct port *port); +static void ad_marker_info_received(struct bond_marker *marker_info, + struct port *port); +static void ad_marker_response_received(struct bond_marker *marker, + struct port *port); -///////////////////////////////////////////////////////////////////////////////// -// ================= api to bonding and kernel code ================== -///////////////////////////////////////////////////////////////////////////////// +/* ================= api to bonding and kernel code ================== */ /** * __get_bond_by_port - get the port's bonding struct @@ -151,17 +152,20 @@ static inline struct aggregator *__get_first_agg(struct port *port) /* If there's no bond for this port, or bond has no slaves */ if (bond == NULL) return NULL; + rcu_read_lock(); first_slave = bond_first_slave_rcu(bond); rcu_read_unlock(); + return first_slave ? &(SLAVE_AD_INFO(first_slave).aggregator) : NULL; } -/* - * __agg_has_partner +/** + * __agg_has_partner - see if we have a partner + * @agg: the agregator we're looking at * * Return nonzero if aggregator has a partner (denoted by a non-zero ether - * address for the partner). Return 0 if not. + * address for the partner). Return 0 if not. */ static inline int __agg_has_partner(struct aggregator *agg) { @@ -171,7 +175,6 @@ static inline int __agg_has_partner(struct aggregator *agg) /** * __disable_port - disable the port's slave * @port: the port we're looking at - * */ static inline void __disable_port(struct port *port) { @@ -181,7 +184,6 @@ static inline void __disable_port(struct port *port) /** * __enable_port - enable the port's slave, if it's up * @port: the port we're looking at - * */ static inline void __enable_port(struct port *port) { @@ -194,7 +196,6 @@ static inline void __enable_port(struct port *port) /** * __port_is_enabled - check if the port's slave is in active state * @port: the port we're looking at - * */ static inline int __port_is_enabled(struct port *port) { @@ -220,7 +221,6 @@ static inline u32 __get_agg_selection_mode(struct port *port) /** * __check_agg_selection_timer - check if the selection timer has expired * @port: the port we're looking at - * */ static inline int __check_agg_selection_timer(struct port *port) { @@ -235,7 +235,6 @@ static inline int __check_agg_selection_timer(struct port *port) /** * __get_state_machine_lock - lock the port's state machines * @port: the port we're looking at - * */ static inline void __get_state_machine_lock(struct port *port) { @@ -245,7 +244,6 @@ static inline void __get_state_machine_lock(struct port *port) /** * __release_state_machine_lock - unlock the port's state machines * @port: the port we're looking at - * */ static inline void __release_state_machine_lock(struct port *port) { @@ -268,10 +266,11 @@ static u16 __get_link_speed(struct port *port) struct slave *slave = port->slave; u16 speed; - /* this if covers only a special case: when the configuration starts with - * link down, it sets the speed to 0. - * This is done in spite of the fact that the e100 driver reports 0 to be - * compatible with MVT in the future.*/ + /* this if covers only a special case: when the configuration starts + * with link down, it sets the speed to 0. + * This is done in spite of the fact that the e100 driver reports 0 + * to be compatible with MVT in the future. + */ if (slave->link != BOND_LINK_UP) speed = 0; else { @@ -293,7 +292,8 @@ static u16 __get_link_speed(struct port *port) break; default: - speed = 0; // unknown speed value from ethtool. shouldn't happen + /* unknown speed value from ethtool. shouldn't happen */ + speed = 0; break; } } @@ -317,8 +317,9 @@ static u8 __get_duplex(struct port *port) u8 retval; - // handling a special case: when the configuration starts with - // link down, it sets the duplex to 0. + /* handling a special case: when the configuration starts with + * link down, it sets the duplex to 0. + */ if (slave->link != BOND_LINK_UP) retval = 0x0; else { @@ -342,15 +343,14 @@ static u8 __get_duplex(struct port *port) /** * __initialize_port_locks - initialize a port's STATE machine spinlock * @port: the slave of the port we're looking at - * */ static inline void __initialize_port_locks(struct slave *slave) { - // make sure it isn't called twice + /* make sure it isn't called twice */ spin_lock_init(&(SLAVE_AD_INFO(slave).state_machine_lock)); } -//conversions +/* Conversions */ /** * __ad_timer_to_ticks - convert a given timer type to AD module ticks @@ -359,39 +359,38 @@ static inline void __initialize_port_locks(struct slave *slave) * * If @timer_type is %current_while_timer, @par indicates long/short timer. * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME, - * %SLOW_PERIODIC_TIME. + * %SLOW_PERIODIC_TIME. */ static u16 __ad_timer_to_ticks(u16 timer_type, u16 par) { u16 retval = 0; /* to silence the compiler */ switch (timer_type) { - case AD_CURRENT_WHILE_TIMER: // for rx machine usage + case AD_CURRENT_WHILE_TIMER: /* for rx machine usage */ if (par) - retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); // short timeout + retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); else - retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); // long timeout + retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); break; - case AD_ACTOR_CHURN_TIMER: // for local churn machine + case AD_ACTOR_CHURN_TIMER: /* for local churn machine */ retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec); break; - case AD_PERIODIC_TIMER: // for periodic machine - retval = (par*ad_ticks_per_sec); // long timeout + case AD_PERIODIC_TIMER: /* for periodic machine */ + retval = (par*ad_ticks_per_sec); /* long timeout */ break; - case AD_PARTNER_CHURN_TIMER: // for remote churn machine + case AD_PARTNER_CHURN_TIMER: /* for remote churn machine */ retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec); break; - case AD_WAIT_WHILE_TIMER: // for selection machine + case AD_WAIT_WHILE_TIMER: /* for selection machine */ retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec); break; } + return retval; } -///////////////////////////////////////////////////////////////////////////////// -// ================= ad_rx_machine helper functions ================== -///////////////////////////////////////////////////////////////////////////////// +/* ================= ad_rx_machine helper functions ================== */ /** * __choose_matched - update a port's matched variable from a received lacpdu @@ -451,7 +450,9 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port) struct port_params *partner = &port->partner_oper; __choose_matched(lacpdu, port); - // record the new parameter values for the partner operational + /* record the new parameter values for the partner + * operational + */ partner->port_number = ntohs(lacpdu->actor_port); partner->port_priority = ntohs(lacpdu->actor_port_priority); partner->system = lacpdu->actor_system; @@ -459,10 +460,12 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port) partner->key = ntohs(lacpdu->actor_key); partner->port_state = lacpdu->actor_state; - // set actor_oper_port_state.defaulted to FALSE + /* set actor_oper_port_state.defaulted to FALSE */ port->actor_oper_port_state &= ~AD_STATE_DEFAULTED; - // set the partner sync. to on if the partner is sync. and the port is matched + /* set the partner sync. to on if the partner is sync, + * and the port is matched + */ if ((port->sm_vars & AD_PORT_MATCHED) && (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION)) partner->port_state |= AD_STATE_SYNCHRONIZATION; @@ -482,11 +485,11 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port) static void __record_default(struct port *port) { if (port) { - // record the partner admin parameters + /* record the partner admin parameters */ memcpy(&port->partner_oper, &port->partner_admin, sizeof(struct port_params)); - // set actor_oper_port_state.defaulted to true + /* set actor_oper_port_state.defaulted to true */ port->actor_oper_port_state |= AD_STATE_DEFAULTED; } } @@ -601,8 +604,10 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port) static void __attach_bond_to_agg(struct port *port) { port = NULL; /* just to satisfy the compiler */ - // This function does nothing since the parser/multiplexer of the receive - // and the parser/multiplexer of the aggregator are already combined + /* This function does nothing since the parser/multiplexer of the + * receive and the parser/multiplexer of the aggregator are already + * combined. + */ } /** @@ -616,8 +621,10 @@ static void __attach_bond_to_agg(struct port *port) static void __detach_bond_from_agg(struct port *port) { port = NULL; /* just to satisfy the compiler */ - // This function does nothing since the parser/multiplexer of the receive - // and the parser/multiplexer of the aggregator are already combined + /* This function does nothing since the parser/multiplexer of the + * receive and the parser/multiplexer of the aggregator are already + * combined + */ } /** @@ -631,7 +638,9 @@ static int __agg_ports_are_ready(struct aggregator *aggregator) int retval = 1; if (aggregator) { - // scan all ports in this aggregator to verfy if they are all ready + /* scan all ports in this aggregator to verfy if they are + * all ready. + */ for (port = aggregator->lag_ports; port; port = port->next_port_in_aggregator) { @@ -691,7 +700,7 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator) bandwidth = aggregator->num_of_ports * 10000; break; default: - bandwidth = 0; /*to silence the compiler ....*/ + bandwidth = 0; /* to silence the compiler */ } } return bandwidth; @@ -700,7 +709,6 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator) /** * __get_active_agg - get the current active aggregator * @aggregator: the aggregator we're looking at - * */ static struct aggregator *__get_active_agg(struct aggregator *aggregator) { @@ -722,15 +730,14 @@ static struct aggregator *__get_active_agg(struct aggregator *aggregator) /** * __update_lacpdu_from_port - update a port's lacpdu fields * @port: the port we're looking at - * */ static inline void __update_lacpdu_from_port(struct port *port) { struct lacpdu *lacpdu = &port->lacpdu; const struct port_params *partner = &port->partner_oper; - /* update current actual Actor parameters */ - /* lacpdu->subtype initialized + /* update current actual Actor parameters + * lacpdu->subtype initialized * lacpdu->version_number initialized * lacpdu->tlv_type_actor_info initialized * lacpdu->actor_information_length initialized @@ -766,9 +773,7 @@ static inline void __update_lacpdu_from_port(struct port *port) */ } -////////////////////////////////////////////////////////////////////////////////////// -// ================= main 802.3ad protocol code ====================================== -////////////////////////////////////////////////////////////////////////////////////// +/* ================= main 802.3ad protocol code ========================= */ /** * ad_lacpdu_send - send out a lacpdu packet on a given port @@ -798,11 +803,12 @@ static int ad_lacpdu_send(struct port *port) memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN); /* Note: source address is set to be the member's PERMANENT address, - because we use it to identify loopback lacpdus in receive. */ + * because we use it to identify loopback lacpdus in receive. + */ memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN); lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU; - lacpdu_header->lacpdu = port->lacpdu; // struct copy + lacpdu_header->lacpdu = port->lacpdu; dev_queue_xmit(skb); @@ -839,11 +845,12 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker) memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN); /* Note: source address is set to be the member's PERMANENT address, - because we use it to identify loopback MARKERs in receive. */ + * because we use it to identify loopback MARKERs in receive. + */ memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN); marker_header->hdr.h_proto = PKT_TYPE_LACPDU; - marker_header->marker = *marker; // struct copy + marker_header->marker = *marker; dev_queue_xmit(skb); @@ -853,72 +860,90 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker) /** * ad_mux_machine - handle a port's mux state machine * @port: the port we're looking at - * */ static void ad_mux_machine(struct port *port) { mux_states_t last_state; - // keep current State Machine state to compare later if it was changed + /* keep current State Machine state to compare later if it was + * changed + */ last_state = port->sm_mux_state; if (port->sm_vars & AD_PORT_BEGIN) { - port->sm_mux_state = AD_MUX_DETACHED; // next state + port->sm_mux_state = AD_MUX_DETACHED; } else { switch (port->sm_mux_state) { case AD_MUX_DETACHED: if ((port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) /* if SELECTED or STANDBY */ - port->sm_mux_state = AD_MUX_WAITING; // next state + port->sm_mux_state = AD_MUX_WAITING; break; case AD_MUX_WAITING: - // if SELECTED == FALSE return to DETACH state - if (!(port->sm_vars & AD_PORT_SELECTED)) { // if UNSELECTED + /* if SELECTED == FALSE return to DETACH state */ + if (!(port->sm_vars & AD_PORT_SELECTED)) { port->sm_vars &= ~AD_PORT_READY_N; - // in order to withhold the Selection Logic to check all ports READY_N value - // every callback cycle to update ready variable, we check READY_N and update READY here + /* in order to withhold the Selection Logic to + * check all ports READY_N value every callback + * cycle to update ready variable, we check + * READY_N and update READY here + */ __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); - port->sm_mux_state = AD_MUX_DETACHED; // next state + port->sm_mux_state = AD_MUX_DETACHED; break; } - // check if the wait_while_timer expired + /* check if the wait_while_timer expired */ if (port->sm_mux_timer_counter && !(--port->sm_mux_timer_counter)) port->sm_vars |= AD_PORT_READY_N; - // in order to withhold the selection logic to check all ports READY_N value - // every callback cycle to update ready variable, we check READY_N and update READY here + /* in order to withhold the selection logic to check + * all ports READY_N value every callback cycle to + * update ready variable, we check READY_N and update + * READY here + */ __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); - // if the wait_while_timer expired, and the port is in READY state, move to ATTACHED state + /* if the wait_while_timer expired, and the port is + * in READY state, move to ATTACHED state + */ if ((port->sm_vars & AD_PORT_READY) && !port->sm_mux_timer_counter) - port->sm_mux_state = AD_MUX_ATTACHED; // next state + port->sm_mux_state = AD_MUX_ATTACHED; break; case AD_MUX_ATTACHED: - // check also if agg_select_timer expired(so the edable port will take place only after this timer) - if ((port->sm_vars & AD_PORT_SELECTED) && (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) && !__check_agg_selection_timer(port)) { - port->sm_mux_state = AD_MUX_COLLECTING_DISTRIBUTING;// next state - } else if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if UNSELECTED or STANDBY + /* check also if agg_select_timer expired (so the + * edable port will take place only after this timer) + */ + if ((port->sm_vars & AD_PORT_SELECTED) && + (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) && + !__check_agg_selection_timer(port)) { + port->sm_mux_state = AD_MUX_COLLECTING_DISTRIBUTING; + } else if (!(port->sm_vars & AD_PORT_SELECTED) || + (port->sm_vars & AD_PORT_STANDBY)) { + /* if UNSELECTED or STANDBY */ port->sm_vars &= ~AD_PORT_READY_N; - // in order to withhold the selection logic to check all ports READY_N value - // every callback cycle to update ready variable, we check READY_N and update READY here + /* in order to withhold the selection logic to + * check all ports READY_N value every callback + * cycle to update ready variable, we check + * READY_N and update READY here + */ __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); - port->sm_mux_state = AD_MUX_DETACHED;// next state + port->sm_mux_state = AD_MUX_DETACHED; } break; case AD_MUX_COLLECTING_DISTRIBUTING: - if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY) || - !(port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) - ) { - port->sm_mux_state = AD_MUX_ATTACHED;// next state - + if (!(port->sm_vars & AD_PORT_SELECTED) || + (port->sm_vars & AD_PORT_STANDBY) || + !(port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION)) { + port->sm_mux_state = AD_MUX_ATTACHED; } else { - // if port state hasn't changed make - // sure that a collecting distributing - // port in an active aggregator is enabled + /* if port state hasn't changed make + * sure that a collecting distributing + * port in an active aggregator is enabled + */ if (port->aggregator && port->aggregator->is_active && !__port_is_enabled(port)) { @@ -927,12 +952,12 @@ static void ad_mux_machine(struct port *port) } } break; - default: //to silence the compiler + default: break; } } - // check if the state machine was changed + /* check if the state machine was changed */ if (port->sm_mux_state != last_state) { pr_debug("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, @@ -963,7 +988,7 @@ static void ad_mux_machine(struct port *port) ad_enable_collecting_distributing(port); port->ntt = true; break; - default: //to silence the compiler + default: break; } } @@ -982,59 +1007,63 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) { rx_states_t last_state; - // keep current State Machine state to compare later if it was changed + /* keep current State Machine state to compare later if it was + * changed + */ last_state = port->sm_rx_state; - // check if state machine should change state - // first, check if port was reinitialized + /* check if state machine should change state */ + + /* first, check if port was reinitialized */ if (port->sm_vars & AD_PORT_BEGIN) - /* next state */ port->sm_rx_state = AD_RX_INITIALIZE; - // check if port is not enabled + /* check if port is not enabled */ else if (!(port->sm_vars & AD_PORT_BEGIN) && !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED)) - /* next state */ port->sm_rx_state = AD_RX_PORT_DISABLED; - // check if new lacpdu arrived - else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || (port->sm_rx_state == AD_RX_DEFAULTED) || (port->sm_rx_state == AD_RX_CURRENT))) { - port->sm_rx_timer_counter = 0; // zero timer + /* check if new lacpdu arrived */ + else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || + (port->sm_rx_state == AD_RX_DEFAULTED) || + (port->sm_rx_state == AD_RX_CURRENT))) { + port->sm_rx_timer_counter = 0; port->sm_rx_state = AD_RX_CURRENT; } else { - // if timer is on, and if it is expired - if (port->sm_rx_timer_counter && !(--port->sm_rx_timer_counter)) { + /* if timer is on, and if it is expired */ + if (port->sm_rx_timer_counter && + !(--port->sm_rx_timer_counter)) { switch (port->sm_rx_state) { case AD_RX_EXPIRED: - port->sm_rx_state = AD_RX_DEFAULTED; // next state + port->sm_rx_state = AD_RX_DEFAULTED; break; case AD_RX_CURRENT: - port->sm_rx_state = AD_RX_EXPIRED; // next state + port->sm_rx_state = AD_RX_EXPIRED; break; - default: //to silence the compiler + default: break; } } else { - // if no lacpdu arrived and no timer is on + /* if no lacpdu arrived and no timer is on */ switch (port->sm_rx_state) { case AD_RX_PORT_DISABLED: if (port->sm_vars & AD_PORT_MOVED) - port->sm_rx_state = AD_RX_INITIALIZE; // next state + port->sm_rx_state = AD_RX_INITIALIZE; else if (port->is_enabled && (port->sm_vars & AD_PORT_LACP_ENABLED)) - port->sm_rx_state = AD_RX_EXPIRED; // next state + port->sm_rx_state = AD_RX_EXPIRED; else if (port->is_enabled && ((port->sm_vars & AD_PORT_LACP_ENABLED) == 0)) - port->sm_rx_state = AD_RX_LACP_DISABLED; // next state + port->sm_rx_state = AD_RX_LACP_DISABLED; break; - default: //to silence the compiler + default: break; } } } - // check if the State machine was changed or new lacpdu arrived + /* check if the State machine was changed or new lacpdu arrived */ if ((port->sm_rx_state != last_state) || (lacpdu)) { pr_debug("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, @@ -1049,10 +1078,9 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) __record_default(port); port->actor_oper_port_state &= ~AD_STATE_EXPIRED; port->sm_vars &= ~AD_PORT_MOVED; - port->sm_rx_state = AD_RX_PORT_DISABLED; // next state - - /*- Fall Through -*/ + port->sm_rx_state = AD_RX_PORT_DISABLED; + /* Fall Through */ case AD_RX_PORT_DISABLED: port->sm_vars &= ~AD_PORT_MATCHED; break; @@ -1064,13 +1092,15 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) port->actor_oper_port_state &= ~AD_STATE_EXPIRED; break; case AD_RX_EXPIRED: - //Reset of the Synchronization flag. (Standard 43.4.12) - //This reset cause to disable this port in the COLLECTING_DISTRIBUTING state of the - //mux machine in case of EXPIRED even if LINK_DOWN didn't arrive for the port. + /* Reset of the Synchronization flag (Standard 43.4.12) + * This reset cause to disable this port in the + * COLLECTING_DISTRIBUTING state of the mux machine in + * case of EXPIRED even if LINK_DOWN didn't arrive for + * the port. + */ port->partner_oper.port_state &= ~AD_STATE_SYNCHRONIZATION; port->sm_vars &= ~AD_PORT_MATCHED; - port->partner_oper.port_state |= - AD_STATE_LACP_ACTIVITY; + port->partner_oper.port_state |= AD_STATE_LACP_ACTIVITY; port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT)); port->actor_oper_port_state |= AD_STATE_EXPIRED; break; @@ -1082,10 +1112,11 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) break; case AD_RX_CURRENT: /* detect loopback situation */ - if (MAC_ADDRESS_EQUAL(&(lacpdu->actor_system), &(port->actor_system))) { - pr_err("%s: An illegal loopback occurred on adapter (%s).\n" - "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n", - port->slave->bond->dev->name, port->slave->dev->name); + if (MAC_ADDRESS_EQUAL(&(lacpdu->actor_system), + &(port->actor_system))) { + pr_err("%s: An illegal loopback occurred on adapter (%s).\nCheck the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n", + port->slave->bond->dev->name, + port->slave->dev->name); return; } __update_selected(lacpdu, port); @@ -1094,7 +1125,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)); port->actor_oper_port_state &= ~AD_STATE_EXPIRED; break; - default: /* to silence the compiler */ + default: break; } } @@ -1103,13 +1134,14 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) /** * ad_tx_machine - handle a port's tx state machine * @port: the port we're looking at - * */ static void ad_tx_machine(struct port *port) { - // check if tx timer expired, to verify that we do not send more than 3 packets per second + /* check if tx timer expired, to verify that we do not send more than + * 3 packets per second + */ if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) { - // check if there is something to send + /* check if there is something to send */ if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) { __update_lacpdu_from_port(port); @@ -1117,14 +1149,16 @@ static void ad_tx_machine(struct port *port) pr_debug("Sent LACPDU on port %d\n", port->actor_port_number); - /* mark ntt as false, so it will not be sent again until - demanded */ + /* mark ntt as false, so it will not be sent + * again until demanded + */ port->ntt = false; } } - // restart tx timer(to verify that we will not exceed AD_MAX_TX_IN_SECOND - port->sm_tx_timer_counter = - ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; + /* restart tx timer(to verify that we will not exceed + * AD_MAX_TX_IN_SECOND + */ + port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; } } @@ -1138,76 +1172,79 @@ static void ad_periodic_machine(struct port *port) { periodic_states_t last_state; - // keep current state machine state to compare later if it was changed + /* keep current state machine state to compare later if it was changed */ last_state = port->sm_periodic_state; - // check if port was reinitialized + /* check if port was reinitialized */ if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) || (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & AD_STATE_LACP_ACTIVITY)) ) { - port->sm_periodic_state = AD_NO_PERIODIC; // next state + port->sm_periodic_state = AD_NO_PERIODIC; } - // check if state machine should change state + /* check if state machine should change state */ else if (port->sm_periodic_timer_counter) { - // check if periodic state machine expired + /* check if periodic state machine expired */ if (!(--port->sm_periodic_timer_counter)) { - // if expired then do tx - port->sm_periodic_state = AD_PERIODIC_TX; // next state + /* if expired then do tx */ + port->sm_periodic_state = AD_PERIODIC_TX; } else { - // If not expired, check if there is some new timeout parameter from the partner state + /* If not expired, check if there is some new timeout + * parameter from the partner state + */ switch (port->sm_periodic_state) { case AD_FAST_PERIODIC: if (!(port->partner_oper.port_state & AD_STATE_LACP_TIMEOUT)) - port->sm_periodic_state = AD_SLOW_PERIODIC; // next state + port->sm_periodic_state = AD_SLOW_PERIODIC; break; case AD_SLOW_PERIODIC: if ((port->partner_oper.port_state & AD_STATE_LACP_TIMEOUT)) { - // stop current timer port->sm_periodic_timer_counter = 0; - port->sm_periodic_state = AD_PERIODIC_TX; // next state + port->sm_periodic_state = AD_PERIODIC_TX; } break; - default: //to silence the compiler + default: break; } } } else { switch (port->sm_periodic_state) { case AD_NO_PERIODIC: - port->sm_periodic_state = AD_FAST_PERIODIC; // next state + port->sm_periodic_state = AD_FAST_PERIODIC; break; case AD_PERIODIC_TX: - if (!(port->partner_oper.port_state - & AD_STATE_LACP_TIMEOUT)) - port->sm_periodic_state = AD_SLOW_PERIODIC; // next state + if (!(port->partner_oper.port_state & + AD_STATE_LACP_TIMEOUT)) + port->sm_periodic_state = AD_SLOW_PERIODIC; else - port->sm_periodic_state = AD_FAST_PERIODIC; // next state + port->sm_periodic_state = AD_FAST_PERIODIC; break; - default: //to silence the compiler + default: break; } } - // check if the state machine was changed + /* check if the state machine was changed */ if (port->sm_periodic_state != last_state) { pr_debug("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_periodic_state); switch (port->sm_periodic_state) { case AD_NO_PERIODIC: - port->sm_periodic_timer_counter = 0; // zero timer + port->sm_periodic_timer_counter = 0; break; case AD_FAST_PERIODIC: - port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle + /* decrement 1 tick we lost in the PERIODIC_TX cycle */ + port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; break; case AD_SLOW_PERIODIC: - port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle + /* decrement 1 tick we lost in the PERIODIC_TX cycle */ + port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; break; case AD_PERIODIC_TX: port->ntt = true; break; - default: //to silence the compiler + default: break; } } @@ -1230,30 +1267,38 @@ static void ad_port_selection_logic(struct port *port) struct slave *slave; int found = 0; - // if the port is already Selected, do nothing + /* if the port is already Selected, do nothing */ if (port->sm_vars & AD_PORT_SELECTED) return; bond = __get_bond_by_port(port); - // if the port is connected to other aggregator, detach it + /* if the port is connected to other aggregator, detach it */ if (port->aggregator) { - // detach the port from its former aggregator + /* detach the port from its former aggregator */ temp_aggregator = port->aggregator; for (curr_port = temp_aggregator->lag_ports; curr_port; last_port = curr_port, - curr_port = curr_port->next_port_in_aggregator) { + curr_port = curr_port->next_port_in_aggregator) { if (curr_port == port) { temp_aggregator->num_of_ports--; - if (!last_port) {// if it is the first port attached to the aggregator + /* if it is the first port attached to the + * aggregator + */ + if (!last_port) { temp_aggregator->lag_ports = port->next_port_in_aggregator; - } else {// not the first port attached to the aggregator + } else { + /* not the first port attached to the + * aggregator + */ last_port->next_port_in_aggregator = port->next_port_in_aggregator; } - // clear the port's relations to this aggregator + /* clear the port's relations to this + * aggregator + */ port->aggregator = NULL; port->next_port_in_aggregator = NULL; port->actor_port_aggregator_identifier = 0; @@ -1261,13 +1306,18 @@ static void ad_port_selection_logic(struct port *port) pr_debug("Port %d left LAG %d\n", port->actor_port_number, temp_aggregator->aggregator_identifier); - // if the aggregator is empty, clear its parameters, and set it ready to be attached + /* if the aggregator is empty, clear its + * parameters, and set it ready to be attached + */ if (!temp_aggregator->lag_ports) ad_clear_agg(temp_aggregator); break; } } - if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list + if (!curr_port) { + /* meaning: the port was related to an aggregator + * but was not on the aggregator port list + */ pr_warning("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n", port->slave->bond->dev->name, port->actor_port_number, @@ -1275,11 +1325,11 @@ static void ad_port_selection_logic(struct port *port) port->aggregator->aggregator_identifier); } } - // search on all aggregators for a suitable aggregator for this port + /* search on all aggregators for a suitable aggregator for this port */ bond_for_each_slave(bond, slave, iter) { aggregator = &(SLAVE_AD_INFO(slave).aggregator); - // keep a free aggregator for later use(if needed) + /* keep a free aggregator for later use(if needed) */ if (!aggregator->lag_ports) { if (!free_aggregator) free_aggregator = aggregator; @@ -1306,23 +1356,26 @@ static void ad_port_selection_logic(struct port *port) port->actor_port_number, port->aggregator->aggregator_identifier); - // mark this port as selected + /* mark this port as selected */ port->sm_vars |= AD_PORT_SELECTED; found = 1; break; } } - // the port couldn't find an aggregator - attach it to a new aggregator + /* the port couldn't find an aggregator - attach it to a new + * aggregator + */ if (!found) { if (free_aggregator) { - // assign port a new aggregator + /* assign port a new aggregator */ port->aggregator = free_aggregator; port->actor_port_aggregator_identifier = port->aggregator->aggregator_identifier; - // update the new aggregator's parameters - // if port was responsed from the end-user + /* update the new aggregator's parameters + * if port was responsed from the end-user + */ if (port->actor_oper_port_key & AD_DUPLEX_KEY_BITS) /* if port is full duplex */ port->aggregator->is_individual = false; @@ -1341,7 +1394,7 @@ static void ad_port_selection_logic(struct port *port) port->aggregator->lag_ports = port; port->aggregator->num_of_ports++; - // mark this port as selected + /* mark this port as selected */ port->sm_vars |= AD_PORT_SELECTED; pr_debug("Port %d joined LAG %d(new LAG)\n", @@ -1353,23 +1406,24 @@ static void ad_port_selection_logic(struct port *port) port->actor_port_number, port->slave->dev->name); } } - // if all aggregator's ports are READY_N == TRUE, set ready=TRUE in all aggregator's ports - // else set ready=FALSE in all aggregator's ports - __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + /* if all aggregator's ports are READY_N == TRUE, set ready=TRUE + * in all aggregator's ports, else set ready=FALSE in all + * aggregator's ports + */ + __set_agg_ports_ready(port->aggregator, + __agg_ports_are_ready(port->aggregator)); aggregator = __get_first_agg(port); ad_agg_selection_logic(aggregator); } -/* - * Decide if "agg" is a better choice for the new active aggregator that +/* Decide if "agg" is a better choice for the new active aggregator that * the current best, according to the ad_select policy. */ static struct aggregator *ad_agg_selection_test(struct aggregator *best, struct aggregator *curr) { - /* - * 0. If no best, select current. + /* 0. If no best, select current. * * 1. If the current agg is not individual, and the best is * individual, select current. @@ -1437,10 +1491,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, static int agg_device_up(const struct aggregator *agg) { struct port *port = agg->lag_ports; + if (!port) return 0; - return (netif_running(port->slave->dev) && - netif_carrier_ok(port->slave->dev)); + + return netif_running(port->slave->dev) && + netif_carrier_ok(port->slave->dev); } /** @@ -1492,8 +1548,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) if (best && __get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) { - /* - * For the STABLE policy, don't replace the old active + /* For the STABLE policy, don't replace the old active * aggregator if it's still active (it has an answering * partner) or if both the best and active don't have an * answering partner. @@ -1501,7 +1556,8 @@ static void ad_agg_selection_logic(struct aggregator *agg) if (active && active->lag_ports && active->lag_ports->is_enabled && (__agg_has_partner(active) || - (!__agg_has_partner(active) && !__agg_has_partner(best)))) { + (!__agg_has_partner(active) && + !__agg_has_partner(best)))) { if (!(!active->actor_oper_aggregator_key && best->actor_oper_aggregator_key)) { best = NULL; @@ -1552,7 +1608,9 @@ static void ad_agg_selection_logic(struct aggregator *agg) best->partner_oper_aggregator_key, best->is_individual, best->is_active); - /* disable the ports that were related to the former active_aggregator */ + /* disable the ports that were related to the former + * active_aggregator + */ if (active) { for (port = active->lag_ports; port; port = port->next_port_in_aggregator) { @@ -1561,8 +1619,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) } } - /* - * if the selected aggregator is of join individuals + /* if the selected aggregator is of join individuals * (partner_system is NULL), enable their ports */ active = __get_active_agg(origin); @@ -1584,7 +1641,6 @@ static void ad_agg_selection_logic(struct aggregator *agg) /** * ad_clear_agg - clear a given aggregator's parameters * @aggregator: the aggregator we're looking at - * */ static void ad_clear_agg(struct aggregator *aggregator) { @@ -1608,7 +1664,6 @@ static void ad_clear_agg(struct aggregator *aggregator) /** * ad_initialize_agg - initialize a given aggregator's parameters * @aggregator: the aggregator we're looking at - * */ static void ad_initialize_agg(struct aggregator *aggregator) { @@ -1625,7 +1680,6 @@ static void ad_initialize_agg(struct aggregator *aggregator) * ad_initialize_port - initialize a given port's parameters * @aggregator: the aggregator we're looking at * @lacp_fast: boolean. whether fast periodic should be used - * */ static void ad_initialize_port(struct port *port, int lacp_fast) { @@ -1657,8 +1711,10 @@ static void ad_initialize_port(struct port *port, int lacp_fast) port->ntt = false; port->actor_admin_port_key = 1; port->actor_oper_port_key = 1; - port->actor_admin_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY; - port->actor_oper_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY; + port->actor_admin_port_state = AD_STATE_AGGREGATION | + AD_STATE_LACP_ACTIVITY; + port->actor_oper_port_state = AD_STATE_AGGREGATION | + AD_STATE_LACP_ACTIVITY; if (lacp_fast) port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT; @@ -1667,7 +1723,7 @@ static void ad_initialize_port(struct port *port, int lacp_fast) memcpy(&port->partner_oper, &tmpl, sizeof(tmpl)); port->is_enabled = true; - // ****** private parameters ****** + /* private parameters */ port->sm_vars = 0x3; port->sm_rx_state = 0; port->sm_rx_timer_counter = 0; @@ -1705,11 +1761,12 @@ static void ad_enable_collecting_distributing(struct port *port) /** * ad_disable_collecting_distributing - disable a port's transmit/receive * @port: the port we're looking at - * */ static void ad_disable_collecting_distributing(struct port *port) { - if (port->aggregator && !MAC_ADDRESS_EQUAL(&(port->aggregator->partner_system), &(null_mac_addr))) { + if (port->aggregator && + !MAC_ADDRESS_EQUAL(&(port->aggregator->partner_system), + &(null_mac_addr))) { pr_debug("Disabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier); @@ -1763,20 +1820,18 @@ static void ad_marker_info_send(struct port *port) * ad_marker_info_received - handle receive of a Marker information frame * @marker_info: Marker info received * @port: the port we're looking at - * */ static void ad_marker_info_received(struct bond_marker *marker_info, struct port *port) { struct bond_marker marker; - // copy the received marker data to the response marker - //marker = *marker_info; + /* copy the received marker data to the response marker */ memcpy(&marker, marker_info, sizeof(struct bond_marker)); - // change the marker subtype to marker response + /* change the marker subtype to marker response */ marker.tlv_type = AD_MARKER_RESPONSE_SUBTYPE; - // send the marker response + /* send the marker response */ if (ad_marker_send(port, &marker) >= 0) { pr_debug("Sent Marker Response on port %d\n", port->actor_port_number); @@ -1793,22 +1848,21 @@ static void ad_marker_info_received(struct bond_marker *marker_info, * information. */ static void ad_marker_response_received(struct bond_marker *marker, - struct port *port) + struct port *port) { - marker = NULL; /* just to satisfy the compiler */ - port = NULL; /* just to satisfy the compiler */ - // DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW + marker = NULL; + port = NULL; + /* DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW */ } -////////////////////////////////////////////////////////////////////////////////////// -// ================= AD exported functions to the main bonding code ================== -////////////////////////////////////////////////////////////////////////////////////// +/* ========= AD exported functions to the main bonding code ========= */ -// Check aggregators status in team every T seconds +/* Check aggregators status in team every T seconds */ #define AD_AGGREGATOR_SELECTION_TIMER 8 -/* - * bond_3ad_initiate_agg_selection(struct bonding *bond) +/** + * bond_3ad_initiate_agg_selection - initate aggregator selection + * @bond: bonding struct * * Set the aggregation selection timer, to initiate an agg selection in * the very near future. Called during first initialization, and during @@ -1839,7 +1893,9 @@ void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution) BOND_AD_INFO(bond).system.sys_priority = 0xFFFF; BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr); - // initialize how many times this module is called in one second(should be about every 100ms) + /* initialize how many times this module is called in one + * second (should be about every 100ms) + */ ad_ticks_per_sec = tick_resolution; bond_3ad_initiate_agg_selection(bond, @@ -1874,21 +1930,21 @@ void bond_3ad_bind_slave(struct slave *slave) port->actor_port_number = SLAVE_AD_INFO(slave).id; /* key is determined according to the link speed, duplex and user key(which * is yet not supported) - * ------------------------------------------------------------ - * Port key : | User key | Speed |Duplex| - * ------------------------------------------------------------ - * 16 6 1 0 */ - port->actor_admin_port_key = 0; /* initialize this parameter */ + port->actor_admin_port_key = 0; port->actor_admin_port_key |= __get_duplex(port); port->actor_admin_port_key |= (__get_link_speed(port) << 1); port->actor_oper_port_key = port->actor_admin_port_key; - /* if the port is not full duplex, then the port should be not lacp Enabled */ + /* if the port is not full duplex, then the port should be not + * lacp Enabled + */ if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)) port->sm_vars &= ~AD_PORT_LACP_ENABLED; /* actor system is the bond's system */ port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr; - /* tx timer(to verify that no more than MAX_TX_IN_SECOND lacpdu's are sent in one second) */ + /* tx timer(to verify that no more than MAX_TX_IN_SECOND + * lacpdu's are sent in one second) + */ port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; port->aggregator = NULL; port->next_port_in_aggregator = NULL; @@ -1925,13 +1981,10 @@ void bond_3ad_unbind_slave(struct slave *slave) struct slave *slave_iter; struct list_head *iter; - // find the aggregator related to this slave aggregator = &(SLAVE_AD_INFO(slave).aggregator); - - // find the port related to this slave port = &(SLAVE_AD_INFO(slave).port); - // if slave is null, the whole port is not initialized + /* if slave is null, the whole port is not initialized */ if (!port->slave) { pr_warning("Warning: %s: Trying to unbind an uninitialized port on %s\n", slave->bond->dev->name, slave->dev->name); @@ -1946,34 +1999,42 @@ void bond_3ad_unbind_slave(struct slave *slave) __update_lacpdu_from_port(port); ad_lacpdu_send(port); - // check if this aggregator is occupied + /* check if this aggregator is occupied */ if (aggregator->lag_ports) { - // check if there are other ports related to this aggregator except - // the port related to this slave(thats ensure us that there is a - // reason to search for new aggregator, and that we will find one - if ((aggregator->lag_ports != port) || (aggregator->lag_ports->next_port_in_aggregator)) { - // find new aggregator for the related port(s) + /* check if there are other ports related to this aggregator + * except the port related to this slave(thats ensure us that + * there is a reason to search for new aggregator, and that we + * will find one + */ + if ((aggregator->lag_ports != port) || + (aggregator->lag_ports->next_port_in_aggregator)) { + /* find new aggregator for the related port(s) */ bond_for_each_slave(bond, slave_iter, iter) { new_aggregator = &(SLAVE_AD_INFO(slave_iter).aggregator); - // if the new aggregator is empty, or it is connected to our port only - if (!new_aggregator->lag_ports - || ((new_aggregator->lag_ports == port) - && !new_aggregator->lag_ports->next_port_in_aggregator)) + /* if the new aggregator is empty, or it is + * connected to our port only + */ + if (!new_aggregator->lag_ports || + ((new_aggregator->lag_ports == port) && + !new_aggregator->lag_ports->next_port_in_aggregator)) break; } if (!slave_iter) new_aggregator = NULL; - // if new aggregator found, copy the aggregator's parameters - // and connect the related lag_ports to the new aggregator + + /* if new aggregator found, copy the aggregator's + * parameters and connect the related lag_ports to the + * new aggregator + */ if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) { pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier); - if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { + if ((new_aggregator->lag_ports == port) && + new_aggregator->is_active) { pr_info("%s: Removing an active aggregator\n", aggregator->slave->bond->dev->name); - // select new active aggregator select_new_active_agg = 1; } @@ -1989,14 +2050,15 @@ void bond_3ad_unbind_slave(struct slave *slave) new_aggregator->is_active = aggregator->is_active; new_aggregator->num_of_ports = aggregator->num_of_ports; - // update the information that is written on the ports about the aggregator + /* update the information that is written on + * the ports about the aggregator + */ for (temp_port = aggregator->lag_ports; temp_port; temp_port = temp_port->next_port_in_aggregator) { temp_port->aggregator = new_aggregator; temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier; } - // clear the aggregator ad_clear_agg(aggregator); if (select_new_active_agg) @@ -2005,14 +2067,16 @@ void bond_3ad_unbind_slave(struct slave *slave) pr_warning("%s: Warning: unbinding aggregator, and could not find a new aggregator for its ports\n", slave->bond->dev->name); } - } else { // in case that the only port related to this aggregator is the one we want to remove + } else { + /* in case that the only port related to this + * aggregator is the one we want to remove + */ select_new_active_agg = aggregator->is_active; - // clear the aggregator ad_clear_agg(aggregator); if (select_new_active_agg) { pr_info("%s: Removing an active aggregator\n", slave->bond->dev->name); - // select new active aggregator + /* select new active aggregator */ temp_aggregator = __get_first_agg(port); if (temp_aggregator) ad_agg_selection_logic(temp_aggregator); @@ -2021,15 +2085,19 @@ void bond_3ad_unbind_slave(struct slave *slave) } pr_debug("Unbinding port %d\n", port->actor_port_number); - // find the aggregator that this port is connected to + + /* find the aggregator that this port is connected to */ bond_for_each_slave(bond, slave_iter, iter) { temp_aggregator = &(SLAVE_AD_INFO(slave_iter).aggregator); prev_port = NULL; - // search the port in the aggregator's related ports + /* search the port in the aggregator's related ports */ for (temp_port = temp_aggregator->lag_ports; temp_port; prev_port = temp_port, - temp_port = temp_port->next_port_in_aggregator) { - if (temp_port == port) { // the aggregator found - detach the port from this aggregator + temp_port = temp_port->next_port_in_aggregator) { + if (temp_port == port) { + /* the aggregator found - detach the port from + * this aggregator + */ if (prev_port) prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator; else @@ -2037,12 +2105,11 @@ void bond_3ad_unbind_slave(struct slave *slave) temp_aggregator->num_of_ports--; if (temp_aggregator->num_of_ports == 0) { select_new_active_agg = temp_aggregator->is_active; - // clear the aggregator ad_clear_agg(temp_aggregator); if (select_new_active_agg) { pr_info("%s: Removing an active aggregator\n", slave->bond->dev->name); - // select new active aggregator + /* select new active aggregator */ ad_agg_selection_logic(__get_first_agg(port)); } } @@ -2083,7 +2150,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work) goto re_arm; /* check if agg_select_timer timer after initialize is timed out */ - if (BOND_AD_INFO(bond).agg_select_timer && !(--BOND_AD_INFO(bond).agg_select_timer)) { + if (BOND_AD_INFO(bond).agg_select_timer && + !(--BOND_AD_INFO(bond).agg_select_timer)) { slave = bond_first_slave_rcu(bond); port = slave ? &(SLAVE_AD_INFO(slave).port) : NULL; @@ -2145,7 +2213,8 @@ re_arm: * received frames (loopback). Since only the payload is given to this * function, it check for loopback. */ -static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u16 length) +static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, + u16 length) { struct port *port; int ret = RX_HANDLER_ANOTHER; @@ -2173,7 +2242,9 @@ static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u1 case AD_TYPE_MARKER: ret = RX_HANDLER_CONSUMED; - // No need to convert fields to Little Endian since we don't use the marker's fields. + /* No need to convert fields to Little Endian since we + * don't use the marker's fields. + */ switch (((struct bond_marker *)lacpdu)->tlv_type) { case AD_MARKER_INFORMATION_SUBTYPE: @@ -2317,10 +2388,13 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) __release_state_machine_lock(port); } -/* - * set link state for bonding master: if we have an active - * aggregator, we're up, if not, we're down. Presumes that we cannot - * have an active aggregator if there are no slaves with link up. +/** + * bond_3ad_set_carrier - set link state for bonding master + * @bond - bonding structure + * + * if we have an active aggregator, we're up, if not, we're down. + * Presumes that we cannot have an active aggregator if there are + * no slaves with link up. * * This behavior complies with IEEE 802.3 section 43.3.9. * @@ -2388,7 +2462,8 @@ int __bond_3ad_get_active_agg_info(struct bonding *bond, ad_info->ports = aggregator->num_of_ports; ad_info->actor_key = aggregator->actor_oper_aggregator_key; ad_info->partner_key = aggregator->partner_oper_aggregator_key; - memcpy(ad_info->partner_system, aggregator->partner_system.mac_addr_value, ETH_ALEN); + memcpy(ad_info->partner_system, + aggregator->partner_system.mac_addr_value, ETH_ALEN); return 0; } @@ -2460,7 +2535,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } /* we couldn't find any suitable slave after the agg_no, so use the - * first suitable found, if found. */ + * first suitable found, if found. + */ if (first_ok_slave) bond_dev_queue_xmit(bond, skb, first_ok_slave->dev); else @@ -2493,7 +2569,10 @@ int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond, return ret; } -/* +/** + * bond_3ad_update_lacp_rate - change the lacp rate + * @bond - bonding struct + * * When modify lacp_rate parameter via sysfs, * update actor_oper_port_state of each port. * |