diff options
| -rw-r--r-- | arch/parisc/include/asm/kbdleds.h | 19 | ||||
| -rw-r--r-- | arch/x86/Kconfig | 35 | ||||
| -rw-r--r-- | arch/x86/boot/main.c | 18 | ||||
| -rw-r--r-- | arch/x86/include/asm/bootparam.h | 3 | ||||
| -rw-r--r-- | arch/x86/include/asm/device.h | 4 | ||||
| -rw-r--r-- | arch/x86/include/asm/dma-mapping.h | 9 | ||||
| -rw-r--r-- | arch/x86/include/asm/kbdleds.h | 17 | ||||
| -rw-r--r-- | arch/x86/kernel/vsmp_64.c | 40 | ||||
| -rw-r--r-- | arch/x86/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/pci/sta2x11-fixup.c | 366 | ||||
| -rw-r--r-- | arch/x86/platform/olpc/olpc-xo1-sci.c | 43 | ||||
| -rw-r--r-- | drivers/tty/vt/keyboard.c | 20 | ||||
| -rw-r--r-- | include/linux/cs5535.h | 1 |
13 files changed, 544 insertions, 33 deletions
diff --git a/arch/parisc/include/asm/kbdleds.h b/arch/parisc/include/asm/kbdleds.h new file mode 100644 index 000000000000..2e2e75a83c28 --- /dev/null +++ b/arch/parisc/include/asm/kbdleds.h @@ -0,0 +1,19 @@ +#ifndef _ASM_PARISC_KBDLEDS_H +#define _ASM_PARISC_KBDLEDS_H + +/* + * On HIL keyboards of PARISC machines there is no NumLock key and + * everyone expects the keypad to be used for numbers. That's why + * we can safely turn on the NUMLOCK bit. + */ + +static inline int kbd_defleds(void) +{ +#if defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD) + return 1 << VC_NUMLOCK; +#else + return 0; +#endif +} + +#endif /* _ASM_PARISC_KBDLEDS_H */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5ab807c1192a..4d37072c498a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -12,6 +12,7 @@ config X86_32 config X86_64 def_bool 64BIT + select X86_DEV_DMA_OPS ### Arch settings config X86 @@ -327,6 +328,7 @@ config X86_EXTENDED_PLATFORM NUMAQ (IBM/Sequent) RDC R-321x SoC SGI 320/540 (Visual Workstation) + STA2X11-based (e.g. Northville) Summit/EXA (IBM x440) Unisys ES7000 IA32 series Moorestown MID devices @@ -373,6 +375,7 @@ config X86_VSMP select PARAVIRT depends on X86_64 && PCI depends on X86_EXTENDED_PLATFORM + depends on SMP ---help--- Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -459,10 +462,10 @@ config X86_32_NON_STANDARD depends on X86_32 && SMP depends on X86_EXTENDED_PLATFORM ---help--- - This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default - subarchitectures. It is intended for a generic binary kernel. - if you select them all, kernel will probe it one by one. and will - fallback to default. + This option compiles in the NUMAQ, Summit, bigsmp, ES7000, + STA2X11, default subarchitectures. It is intended for a generic + binary kernel. If you select them all, kernel will probe it + one by one and will fallback to default. # Alphabetically sorted list of Non standard 32 bit platforms @@ -502,6 +505,22 @@ config X86_VISWS A kernel compiled for the Visual Workstation will run on general PCs as well. See <file:Documentation/sgi-visws.txt> for details. +config STA2X11 + bool "STA2X11 Companion Chip Support" + depends on X86_32_NON_STANDARD && PCI + select X86_DEV_DMA_OPS + select X86_DMA_REMAP + select SWIOTLB + select MFD_STA2X11 + select ARCH_REQUIRE_GPIOLIB + default n + ---help--- + This adds support for boards based on the STA2X11 IO-Hub, + a.k.a. "ConneXt". The chip is used in place of the standard + PC chipset, so all "standard" peripherals are missing. If this + option is selected the kernel will still be able to boot on + standard PC machines. + config X86_SUMMIT bool "Summit/EXA (IBM x440)" depends on X86_32_NON_STANDARD @@ -2210,6 +2229,14 @@ config HAVE_TEXT_POKE_SMP bool select STOP_MACHINE if SMP +config X86_DEV_DMA_OPS + bool + depends on X86_64 || STA2X11 + +config X86_DMA_REMAP + bool + depends on STA2X11 + source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c index 40358c8905be..cf6083d444f4 100644 --- a/arch/x86/boot/main.c +++ b/arch/x86/boot/main.c @@ -57,14 +57,20 @@ static void copy_boot_params(void) } /* - * Set the keyboard repeat rate to maximum. Unclear why this + * Query the keyboard lock status as given by the BIOS, and + * set the keyboard repeat rate to maximum. Unclear why the latter * is done here; this might be possible to kill off as stale code. */ -static void keyboard_set_repeat(void) +static void keyboard_init(void) { - struct biosregs ireg; + struct biosregs ireg, oreg; initregs(&ireg); - ireg.ax = 0x0305; + + ireg.ah = 0x02; /* Get keyboard status */ + intcall(0x16, &ireg, &oreg); + boot_params.kbd_status = oreg.al; + + ireg.ax = 0x0305; /* Set keyboard repeat rate */ intcall(0x16, &ireg, NULL); } @@ -151,8 +157,8 @@ void main(void) /* Detect memory layout */ detect_memory(); - /* Set keyboard repeat rate (why?) */ - keyboard_set_repeat(); + /* Set keyboard repeat rate (why?) and query the lock flags */ + keyboard_init(); /* Query MCA information */ query_mca(); diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 2f90c51cc49d..eb45aa6b1f27 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -112,7 +112,8 @@ struct boot_params { __u8 e820_entries; /* 0x1e8 */ __u8 eddbuf_entries; /* 0x1e9 */ __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ - __u8 _pad6[6]; /* 0x1eb */ + __u8 kbd_status; /* 0x1eb */ + __u8 _pad6[5]; /* 0x1ec */ struct setup_header hdr; /* setup header */ /* 0x1f1 */ __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h index 63a2a03d7d51..93e1c55f14ab 100644 --- a/arch/x86/include/asm/device.h +++ b/arch/x86/include/asm/device.h @@ -5,8 +5,8 @@ struct dev_archdata { #ifdef CONFIG_ACPI void *acpi_handle; #endif -#ifdef CONFIG_X86_64 -struct dma_map_ops *dma_ops; +#ifdef CONFIG_X86_DEV_DMA_OPS + struct dma_map_ops *dma_ops; #endif #if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU) void *iommu; /* hook for IOMMU specific extension */ diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 4b4331d71935..61c0bd25845a 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -30,7 +30,7 @@ extern struct dma_map_ops *dma_ops; static inline struct dma_map_ops *get_dma_ops(struct device *dev) { -#ifdef CONFIG_X86_32 +#ifndef CONFIG_X86_DEV_DMA_OPS return dma_ops; #else if (unlikely(!dev) || !dev->archdata.dma_ops) @@ -62,6 +62,12 @@ extern void *dma_generic_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr, gfp_t flag, struct dma_attrs *attrs); +#ifdef CONFIG_X86_DMA_REMAP /* Platform code defines bridge-specific code */ +extern bool dma_capable(struct device *dev, dma_addr_t addr, size_t size); +extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr); +extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr); +#else + static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) { if (!dev->dma_mask) @@ -79,6 +85,7 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) { return daddr; } +#endif /* CONFIG_X86_DMA_REMAP */ static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, diff --git a/arch/x86/include/asm/kbdleds.h b/arch/x86/include/asm/kbdleds.h new file mode 100644 index 000000000000..f27ac5ff597d --- /dev/null +++ b/arch/x86/include/asm/kbdleds.h @@ -0,0 +1,17 @@ +#ifndef _ASM_X86_KBDLEDS_H +#define _ASM_X86_KBDLEDS_H + +/* + * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on. + * This seems a good reason to start with NumLock off. That's why on X86 we + * ask the bios for the correct state. + */ + +#include <asm/setup.h> + +static inline int kbd_defleds(void) +{ + return boot_params.kbd_status & 0x20 ? (1 << VC_NUMLOCK) : 0; +} + +#endif /* _ASM_X86_KBDLEDS_H */ diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index a1d804bcd483..8eeb55a551b4 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/pci_ids.h> #include <linux/pci_regs.h> +#include <linux/smp.h> #include <asm/apic.h> #include <asm/pci-direct.h> @@ -22,6 +23,8 @@ #include <asm/paravirt.h> #include <asm/setup.h> +#define TOPOLOGY_REGISTER_OFFSET 0x10 + #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* * Interrupt control on vSMPowered systems: @@ -149,12 +152,49 @@ int is_vsmp_box(void) return 0; } #endif + +static void __init vsmp_cap_cpus(void) +{ +#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP) + void __iomem *address; + unsigned int cfg, topology, node_shift, maxcpus; + + /* + * CONFIG_X86_VSMP is not configured, so limit the number CPUs to the + * ones present in the first board, unless explicitly overridden by + * setup_max_cpus + */ + if (setup_max_cpus != NR_CPUS) + return; + + /* Read the vSMP Foundation topology register */ + cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0); + address = early_ioremap(cfg + TOPOLOGY_REGISTER_OFFSET, 4); + if (WARN_ON(!address)) + return; + + topology = readl(address); + node_shift = (topology >> 16) & 0x7; + if (!node_shift) + /* The value 0 should be decoded as 8 */ + node_shift = 8; + maxcpus = (topology & ((1 << node_shift) - 1)) + 1; + + pr_info("vSMP CTL: Capping CPUs to %d (CONFIG_X86_VSMP is unset)\n", + maxcpus); + setup_max_cpus = maxcpus; + early_iounmap(address, 4); +#endif +} + void __init vsmp_init(void) { detect_vsmp_box(); if (!is_vsmp_box()) return; + vsmp_cap_cpus(); + set_vsmp_pv_ops(); return; } diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index e76e18c94a3c..3af5a1e79c9c 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_X86_INTEL_CE) += ce4100.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o +obj-$(CONFIG_STA2X11) += sta2x11-fixup.o + obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c new file mode 100644 index 000000000000..9d8a509c9730 --- /dev/null +++ b/arch/x86/pci/sta2x11-fixup.c @@ -0,0 +1,366 @@ +/* + * arch/x86/pci/sta2x11-fixup.c + * glue code for lib/swiotlb.c and DMA translation between STA2x11 + * AMBA memory mapping and the X86 memory mapping + * + * ST Microelectronics ConneXt (STA2X11/STA2X10) + * + * Copyright (c) 2010-2011 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/export.h> +#include <linux/list.h> + +#define STA2X11_SWIOTLB_SIZE (4*1024*1024) +extern int swiotlb_late_init_with_default_size(size_t default_size); + +/* + * We build a list of bus numbers that are under the ConneXt. The + * main bridge hosts 4 busses, which are the 4 endpoints, in order. + */ +#define STA2X11_NR_EP 4 /* 0..3 included */ +#define STA2X11_NR_FUNCS 8 /* 0..7 included */ +#define STA2X11_AMBA_SIZE (512 << 20) + +struct sta2x11_ahb_regs { /* saved during suspend */ + u32 base, pexlbase, pexhbase, crw; +}; + +struct sta2x11_mapping { + u32 amba_base; + int is_suspended; + struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS]; +}; + +struct sta2x11_instance { + struct list_head list; + int bus0; + struct sta2x11_mapping map[STA2X11_NR_EP]; +}; + +static LIST_HEAD(sta2x11_instance_list); + +/* At probe time, record new instances of this bridge (likely one only) */ +static void sta2x11_new_instance(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + + instance = kzalloc(sizeof(*instance), GFP_ATOMIC); + if (!instance) + return; + /* This has a subordinate bridge, with 4 more-subordinate ones */ + instance->bus0 = pdev->subordinate->number + 1; + + if (list_empty(&sta2x11_instance_list)) { + int size = STA2X11_SWIOTLB_SIZE; + /* First instance: register your own swiotlb area */ + dev_info(&pdev->dev, "Using SWIOTLB (size %i)\n", size); + if (swiotlb_late_init_with_default_size(size)) + dev_emerg(&pdev->dev, "init swiotlb failed\n"); + } + list_add(&instance->list, &sta2x11_instance_list); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, 0xcc17, sta2x11_new_instance); + +/* + * Utility functions used in this file from below + */ +static struct sta2x11_instance *sta2x11_pdev_to_instance(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + int ep; + + list_for_each_entry(instance, &sta2x11_instance_list, list) { + ep = pdev->bus->number - instance->bus0; + if (ep >= 0 && ep < STA2X11_NR_EP) + return instance; + } + return NULL; +} + +static int sta2x11_pdev_to_ep(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + + instance = sta2x11_pdev_to_instance(pdev); + if (!instance) + return -1; + + return pdev->bus->number - instance->bus0; +} + +static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + int ep; + + instance = sta2x11_pdev_to_instance(pdev); + if (!instance) + return NULL; + ep = sta2x11_pdev_to_ep(pdev); + return instance->map + ep; +} + +/* This is exported, as some devices need to access the MFD registers */ +struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev) +{ + return sta2x11_pdev_to_instance(pdev); +} +EXPORT_SYMBOL(sta2x11_get_instance); + + +/** + * p2a - Translate physical address to STA2x11 AMBA address, + * used for DMA transfers to STA2x11 + * @p: Physical address + * @pdev: PCI device (must be hosted within the connext) + */ +static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev) +{ + struct sta2x11_mapping *map; + dma_addr_t a; + + map = sta2x11_pdev_to_mapping(pdev); + a = p + map->amba_base; + return a; +} + +/** + * a2p - Translate STA2x11 AMBA address to physical address + * used for DMA transfers from STA2x11 + * @a: STA2x11 AMBA address + * @pdev: PCI device (must be hosted within the connext) + */ +static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev) +{ + struct sta2x11_mapping *map; + dma_addr_t p; + + map = sta2x11_pdev_to_mapping(pdev); + p = a - map->amba_base; + return p; +} + +/** + * sta2x11_swiotlb_alloc_coherent - Allocate swiotlb bounce buffers + * returns virtual address. This is the only "special" function here. + * @dev: PCI device + * @size: Size of the buffer + * @dma_handle: DMA address + * @flags: memory flags + */ +static void *sta2x11_swiotlb_alloc_coherent(struct device *dev, + size_t size, + dma_addr_t *dma_handle, + gfp_t flags, + struct dma_attrs *attrs) +{ + void *vaddr; + + vaddr = dma_generic_alloc_coherent(dev, size, dma_handle, flags, attrs); + if (!vaddr) + vaddr = swiotlb_alloc_coherent(dev, size, dma_handle, flags); + *dma_handle = p2a(*dma_handle, to_pci_dev(dev)); + return vaddr; +} + +/* We have our own dma_ops: the same as swiotlb but from alloc (above) */ +static struct dma_map_ops sta2x11_dma_ops = { + .alloc = sta2x11_swiotlb_alloc_coherent, + .free = swiotlb_free_coherent, + .map_page = swiotlb_map_page, + .unmap_page = swiotlb_unmap_page, + .map_sg = swiotlb_map_sg_attrs, + .unmap_sg = swiotlb_unmap_sg_attrs, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .mapping_error = swiotlb_dma_mapping_error, + .dma_supported = NULL, /* FIXME: we should use this instead! */ +}; + +/* At setup time, we use our own ops if the device is a ConneXt one */ +static void sta2x11_setup_pdev(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev); + + if (!instance) /* either a sta2x11 bridge or another ST device */ + return; + pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1); + pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1); + pdev->dev.archdata.dma_ops = &sta2x11_dma_ops; + + /* We must enable all devices as master, for audio DMA to work */ + pci_set_master(pdev); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev); + +/* + * The following three functions are exported (used in swiotlb: FIXME) + */ +/** + * dma_capable - Check if device can manage DMA transfers (FIXME: kill it) + * @dev: device for a PCI device + * @addr: DMA address + * @size: DMA size + */ +bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) +{ + struct sta2x11_mapping *map; + + if (dev->archdata.dma_ops != &sta2x11_dma_ops) { + if (!dev->dma_mask) + return false; + return addr + size - 1 <= *dev->dma_mask; + } + + map = sta2x11_pdev_to_mapping(to_pci_dev(dev)); + + if (!map || (addr < map->amba_base)) + return false; + if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) { + return false; + } + + return true; +} + +/** + * phys_to_dma - Return the DMA AMBA address used for this STA2x11 device + * @dev: device for a PCI device + * @paddr: Physical address + */ +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + if (dev->archdata.dma_ops != &sta2x11_dma_ops) + return paddr; + return p2a(paddr, to_pci_dev(dev)); +} + +/** + * dma_to_phys - Return the physical address used for this STA2x11 DMA address + * @dev: device for a PCI device + * @daddr: STA2x11 AMBA DMA address + */ +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + if (dev->archdata.dma_ops != &sta2x11_dma_ops) + return daddr; + return a2p(daddr, to_pci_dev(dev)); +} + + +/* + * At boot we must set up the mappings for the pcie-to-amba bridge. + * It involves device access, and the same happens at suspend/resume time + */ + +#define AHB_MAPB 0xCA4 +#define AHB_CRW(i) (AHB_MAPB + 0 + (i) * 0x10) +#define AHB_CRW_SZMASK 0xfffffc00UL +#define AHB_CRW_ENABLE (1 << 0) +#define AHB_CRW_WTYPE_MEM (2 << 1) +#define AHB_CRW_ROE (1UL << 3) /* Relax Order Ena */ +#define AHB_CRW_NSE (1UL << 4) /* No Snoop Enable */ +#define AHB_BASE(i) (AHB_MAPB + 4 + (i) * 0x10) +#define AHB_PEXLBASE(i) (AHB_MAPB + 8 + (i) * 0x10) +#define AHB_PEXHBASE(i) (AHB_MAPB + 12 + (i) * 0x10) + +/* At probe time, enable mapping for each endpoint, using the pdev */ +static void sta2x11_map_ep(struct pci_dev *pdev) +{ + struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + int i; + + if (!map) + return; + pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base); + + /* Configure AHB mapping */ + pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0); + pci_write_config_dword(pdev, AHB_PEXHBASE(0), 0); + pci_write_config_dword(pdev, AHB_CRW(0), STA2X11_AMBA_SIZE | + AHB_CRW_WTYPE_MEM | AHB_CRW_ENABLE); + + /* Disable all the other windows */ + for (i = 1; i < STA2X11_NR_FUNCS; i++) + pci_write_config_dword(pdev, AHB_CRW(i), 0); + + dev_info(&pdev->dev, + "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n", + sta2x11_pdev_to_ep(pdev), map->amba_base, + map->amba_base + STA2X11_AMBA_SIZE - 1); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep); + +#ifdef CONFIG_PM /* Some register values must be saved and restored */ + +static void suspend_mapping(struct pci_dev *pdev) +{ + struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + int i; + + if (!map) + return; + + if (map->is_suspended) + return; + map->is_suspended = 1; + + /* Save all window configs */ + for (i = 0; i < STA2X11_NR_FUNCS; i++) { + struct sta2x11_ahb_regs *regs = map->regs + i; + + pci_read_config_dword(pdev, AHB_BASE(i), ®s->base); + pci_read_config_dword(pdev, AHB_PEXLBASE(i), ®s->pexlbase); + pci_read_config_dword(pdev, AHB_PEXHBASE(i), ®s->pexhbase); + pci_read_config_dword(pdev, AHB_CRW(i), ®s->crw); + } +} +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, suspend_mapping); + +static void resume_mapping(struct pci_dev *pdev) +{ + struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + int i; + + if (!map) + return; + + + if (!map->is_suspended) + goto out; + map->is_suspended = 0; + + /* Restore all window configs */ + for (i = 0; i < STA2X11_NR_FUNCS; i++) { + struct sta2x11_ahb_regs *regs = map->regs + i; + + pci_write_config_dword(pdev, AHB_BASE(i), regs->base); + pci_write_config_dword(pdev, AHB_PEXLBASE(i), regs->pexlbase); + pci_write_config_dword(pdev, AHB_PEXHBASE(i), regs->pexhbase); + pci_write_config_dword(pdev, AHB_CRW(i), regs->crw); + } +out: + pci_set_master(pdev); /* Like at boot, enable master on all devices */ +} +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, resume_mapping); + +#endif /* CONFIG_PM */ diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c index 1d4c783d7325..04b8c73659c5 100644 --- a/arch/x86/platform/olpc/olpc-xo1-sci.c +++ b/arch/x86/platform/olpc/olpc-xo1-sci.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/pm_wakeup.h> #include <linux/mfd/core.h> #include <linux/power_supply.h> #include <linux/suspend.h> @@ -83,8 +84,12 @@ static void send_ebook_state(void) return; } + if (!!test_bit(SW_TABLET_MODE, ebook_switch_idev->sw) == state) + return; /* Nothing new to report. */ + input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state); input_sync(ebook_switch_idev); + pm_wakeup_event(&ebook_switch_idev->dev, 0); } static void flip_lid_inverter(void) @@ -123,8 +128,12 @@ static void detect_lid_state(void) /* Report current lid switch state through input layer */ static void send_lid_state(void) { + if (!!test_bit(SW_LID, lid_switch_idev->sw) == !lid_open) + return; /* Nothing new to report. */ + input_report_switch(lid_switch_idev, SW_LID, !lid_open); input_sync(lid_switch_idev); + pm_wakeup_event(&lid_switch_idev->dev, 0); } static ssize_t lid_wake_mode_show(struct device *dev, @@ -213,11 +222,30 @@ static irqreturn_t xo1_sci_intr(int irq, void *dev_id) dev_dbg(&pdev->dev, "sts %x gpe %x\n", sts, gpe); - if (sts & CS5536_PWRBTN_FLAG && !(sts & CS5536_WAK_FLAG)) { - input_report_key(power_button_idev, KEY_POWER, 1); - input_sync(power_button_idev); - input_report_key(power_button_idev, KEY_POWER, 0); - input_sync(power_button_idev); + if (sts & CS5536_PWRBTN_FLAG) { + if (!(sts & CS5536_WAK_FLAG)) { + /* Only report power button input when it was pressed + * during regular operation (as opposed to when it + * was used to wake the system). */ + input_report_key(power_button_idev, KEY_POWER, 1); + input_sync(power_button_idev); + input_report_key(power_button_idev, KEY_POWER, 0); + input_sync(power_button_idev); + } + /* Report the wakeup event in all cases. */ + pm_wakeup_event(&power_button_idev->dev, 0); + } + + if ((sts & (CS5536_RTC_FLAG | CS5536_WAK_FLAG)) == + (CS5536_RTC_FLAG | CS5536_WAK_FLAG)) { + /* When the system is woken by the RTC alarm, report the + * event on the rtc device. */ + struct device *rtc = bus_find_device_by_name( + &platform_bus_type, NULL, "rtc_cmos"); + if (rtc) { + pm_wakeup_event(rtc, 0); + put_device(rtc); + } } if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */ @@ -310,9 +338,10 @@ static int __devinit setup_sci_interrupt(struct platform_device *pdev) outb(lo, CS5536_PIC_INT_SEL2); } - /* Enable SCI from power button, and clear pending interrupts */ + /* Enable interesting SCI events, and clear pending interrupts */ sts = inl(acpi_base + CS5536_PM1_STS); - outl((CS5536_PM_PWRBTN << 16) | 0xffff, acpi_base + CS5536_PM1_STS); + outl(((CS5536_PM_PWRBTN | CS5536_PM_RTC) << 16) | 0xffff, + acpi_base + CS5536_PM1_STS); r = request_irq(sci_irq, xo1_sci_intr, 0, DRV_NAME, pdev); if (r) diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 3b0c4e32ed7b..48cc6f25cfd3 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -53,17 +53,13 @@ extern void ctrl_alt_del(void); #define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META)) -/* - * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on. - * This seems a good reason to start with NumLock off. On HIL keyboards - * of PARISC machines however there is no NumLock key and everyone expects the - * keypad to be used for numbers. - */ - -#if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD)) -#define KBD_DEFLEDS (1 << VC_NUMLOCK) +#if defined(CONFIG_X86) || defined(CONFIG_PARISC) +#include <asm/kbdleds.h> #else -#define KBD_DEFLEDS 0 +static inline int kbd_defleds(void) +{ + return 0; +} #endif #define KBD_DEFLOCK 0 @@ -1524,8 +1520,8 @@ int __init kbd_init(void) int error; for (i = 0; i < MAX_NR_CONSOLES; i++) { - kbd_table[i].ledflagstate = KBD_DEFLEDS; - kbd_table[i].default_ledflagstate = KBD_DEFLEDS; + kbd_table[i].ledflagstate = kbd_defleds(); + kbd_table[i].default_ledflagstate = kbd_defleds(); kbd_table[i].ledmode = LED_SHOW_FLAGS; kbd_table[i].lockstate = KBD_DEFLOCK; kbd_table[i].slockstate = 0; diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h index c077aec3a6ff..cfe83239d7f0 100644 --- a/include/linux/cs5535.h +++ b/include/linux/cs5535.h @@ -95,6 +95,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group, /* CS5536_PM1_STS bits */ #define CS5536_WAK_FLAG (1 << 15) +#define CS5536_RTC_FLAG (1 << 10) #define CS5536_PWRBTN_FLAG (1 << 8) /* CS5536_PM1_EN bits */ |