diff options
| -rw-r--r-- | drivers/net/wireless/ti/wlcore/spi.c | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 44f059f7f34e..dec151247d0d 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -30,6 +30,7 @@ #include <linux/spi/spi.h> #include <linux/wl12xx.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include "wlcore.h" #include "wl12xx_80211.h" @@ -81,6 +82,7 @@ struct wl12xx_spi_glue { struct device *dev; struct platform_device *core; + struct regulator *reg; /* Power regulator */ }; static void wl12xx_spi_reset(struct device *child) @@ -318,11 +320,40 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, return 0; } +/** + * wl12xx_spi_set_power - power on/off the wl12xx unit + * @child: wl12xx device handle. + * @enable: true/false to power on/off the unit. + * + * use the WiFi enable regulator to enable/disable the WiFi unit. + */ +static int wl12xx_spi_set_power(struct device *child, bool enable) +{ + int ret = 0; + struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); + + WARN_ON(!glue->reg); + + /* Update regulator state */ + if (enable) { + ret = regulator_enable(glue->reg); + if (ret) + dev_err(child, "Power enable failure\n"); + } else { + ret = regulator_disable(glue->reg); + if (ret) + dev_err(child, "Power disable failure\n"); + } + + return ret; +} + static struct wl1271_if_operations spi_ops = { .read = wl12xx_spi_raw_read, .write = wl12xx_spi_raw_write, .reset = wl12xx_spi_reset, .init = wl12xx_spi_init, + .power = wl12xx_spi_set_power, .set_block_size = NULL, }; @@ -353,6 +384,14 @@ static int wl1271_probe(struct spi_device *spi) * comes from the board-peripherals file */ spi->bits_per_word = 32; + glue->reg = devm_regulator_get(&spi->dev, "vwlan"); + if (PTR_ERR(glue->reg) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (IS_ERR(glue->reg)) { + dev_err(glue->dev, "can't get regulator\n"); + return PTR_ERR(glue->reg); + } + ret = spi_setup(spi); if (ret < 0) { dev_err(glue->dev, "spi_setup failed\n"); |