diff options
| -rw-r--r-- | Documentation/scsi/osst.txt | 218 | ||||
| -rw-r--r-- | MAINTAINERS | 10 | ||||
| -rw-r--r-- | drivers/scsi/Kconfig | 22 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/scsi/osst.c | 6107 | ||||
| -rw-r--r-- | drivers/scsi/osst.h | 651 | ||||
| -rw-r--r-- | drivers/scsi/osst_detect.h | 7 | ||||
| -rw-r--r-- | drivers/scsi/osst_options.h | 107 | ||||
| -rw-r--r-- | drivers/scsi/st.c | 6 |
9 files changed, 3 insertions, 7126 deletions
diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt deleted file mode 100644 index 00c8ebb2fd18..000000000000 --- a/Documentation/scsi/osst.txt +++ /dev/null @@ -1,218 +0,0 @@ -README file for the osst driver -=============================== -(w) Kurt Garloff <garloff@suse.de> 12/2000 - -This file describes the osst driver as of version 0.8.x/0.9.x, the released -version of the osst driver. -It is intended to help advanced users to understand the role of osst and to -get them started using (and maybe debugging) it. -It won't address issues like "How do I compile a kernel?" or "How do I load -a module?", as these are too basic. -Once the OnStream got merged into the official kernel, the distro makers -will provide the OnStream support for those who are not familiar with -hacking their kernels. - - -Purpose -------- -The osst driver was developed, because the standard SCSI tape driver in -Linux, st, does not support the OnStream SC-x0 SCSI tape. The st is not to -blame for that, as the OnStream tape drives do not support the standard SCSI -command set for Serial Access Storage Devices (SASDs), which basically -corresponds to the QIC-157 spec. -Nevertheless, the OnStream tapes are nice pieces of hardware and therefore -the osst driver has been written to make these tape devs supported by Linux. -The driver is free software. It's released under the GNU GPL and planned to -be integrated into the mainstream kernel. - - -Implementation --------------- -The osst is a new high-level SCSI driver, just like st, sr, sd and sg. It -can be compiled into the kernel or loaded as a module. -As it represents a new device, it got assigned a new device node: /dev/osstX -are character devices with major no 206 and minor numbers like the /dev/stX -devices. If those are not present, you may create them by calling -Makedevs.sh as root (see below). -The driver started being a copy of st and as such, the osst devices' -behavior looks very much the same as st to the userspace applications. - - -History -------- -In the first place, osst shared its identity very much with st. That meant -that it used the same kernel structures and the same device node as st. -So you could only have either of them being present in the kernel. This has -been fixed by registering an own device, now. -st and osst can coexist, each only accessing the devices it can support by -themselves. - - -Installation ------------- -osst got integrated into the linux kernel. Select it during kernel -configuration as module or compile statically into the kernel. -Compile your kernel and install the modules. - -Now, your osst driver is inside the kernel or available as a module, -depending on your choice during kernel config. You may still need to create -the device nodes by calling the Makedevs.sh script (see below) manually. - -To load your module, you may use the command -modprobe osst -as root. dmesg should show you, whether your OnStream tapes have been -recognized. - -If you want to have the module autoloaded on access to /dev/osst, you may -add something like -alias char-major-206 osst -to a file under /etc/modprobe.d/ directory. - -You may find it convenient to create a symbolic link -ln -s nosst0 /dev/tape -to make programs assuming a default name of /dev/tape more convenient to -use. - -The device nodes for osst have to be created. Use the Makedevs.sh script -attached to this file. - - -Using it --------- -You may use the OnStream tape driver with your standard backup software, -which may be tar, cpio, amanda, arkeia, BRU, Lone Tar, ... -by specifying /dev/(n)osst0 as the tape device to use or using the above -symlink trick. The IOCTLs to control tape operation are also mostly -supported and you may try the mt (or mt_st) program to jump between -filemarks, eject the tape, ... - -There's one limitation: You need to use a block size of 32kB. - -(This limitation is worked on and will be fixed in version 0.8.8 of - this driver.) - -If you just want to get started with standard software, here is an example -for creating and restoring a full backup: -# Backup -tar cvf - / --exclude /proc | buffer -s 32k -m 24M -B -t -o /dev/nosst0 -# Restore -buffer -s 32k -m 8M -B -t -i /dev/osst0 | tar xvf - -C / - -The buffer command has been used to buffer the data before it goes to the -tape (or the file system) in order to smooth out the data stream and prevent -the tape from needing to stop and rewind. The OnStream does have an internal -buffer and a variable speed which help this, but especially on writing, the -buffering still proves useful in most cases. It also pads the data to -guarantees the block size of 32k. (Otherwise you may pass the -b64 option to -tar.) -Expect something like 1.8MB/s for the SC-x0 drives and 0.9MB/s for the DI-30. -The USB drive will give you about 0.7MB/s. -On a fast machine, you may profit from software data compression (z flag for -tar). - - -USB and IDE ------------ -Via the SCSI emulation layers usb-storage and ide-scsi, you can also use the -osst driver to drive the USB-30 and the DI-30 drives. (Unfortunately, there -is no such layer for the parallel port, otherwise the DP-30 would work as -well.) For the USB support, you need the latest 2.4.0-test kernels and the -latest usb-storage driver from -http://www.linux-usb.org/ -http://sourceforge.net/cvs/?group_id=3581 - -Note that the ide-tape driver as of 1.16f uses a slightly outdated on-tape -format and therefore is not completely interoperable with osst tapes. - -The ADR-x0 line is fully SCSI-2 compliant and is supported by st, not osst. -The on-tape format is supposed to be compatible with the one used by osst. - - -Feedback and updates --------------------- -The driver development is coordinated through a mailing list -<osst@linux1.onstream.nl> -a CVS repository and some web pages. -The tester's pages which contain recent news and updated drivers to download -can be found on -http://sourceforge.net/projects/osst/ - -If you find any problems, please have a look at the tester's page in order -to see whether the problem is already known and solved. Otherwise, please -report it to the mailing list. Your feedback is welcome. (This holds also -for reports of successful usage, of course.) -In case of trouble, please do always provide the following info: -* driver and kernel version used (see syslog) -* driver messages (syslog) -* SCSI config and OnStream Firmware (/proc/scsi/scsi) -* description of error. Is it reproducible? -* software and commands used - -You may subscribe to the mailing list, BTW, it's a majordomo list. - - -Status ------- -0.8.0 was the first widespread BETA release. Since then a lot of reports -have been sent, but mostly reported success or only minor trouble. -All the issues have been addressed. -Check the web pages for more info about the current developments. -0.9.x is the tree for the 2.3/2.4 kernel. - - -Acknowledgments ----------------- -The driver has been started by making a copy of Kai Makisara's st driver. -Most of the development has been done by Willem Riede. The presence of the -userspace program osg (onstreamsg) from Terry Hardie has been rather -helpful. The same holds for Gadi Oxman's ide-tape support for the DI-30. -I did add some patches to those drivers as well and coordinated things a -little bit. -Note that most of them did mostly spend their spare time for the creation of -this driver. -The people from OnStream, especially Jack Bombeeck did support this project -and always tried to answer HW or FW related questions. Furthermore, he -pushed the FW developers to do the right things. -SuSE did support this project by allowing me to work on it during my working -time for them and by integrating the driver into their distro. - -More people did help by sending useful comments. Sorry to those who have -been forgotten. Thanks to all the GNU/FSF and Linux developers who made this -platform such an interesting, nice and stable platform. -Thanks go to those who tested the drivers and did send useful reports. Your -help is needed! - - -Makedevs.sh ------------ -#!/bin/sh -# Script to create OnStream SC-x0 device nodes (major 206) -# Usage: Makedevs.sh [nos [path to dev]] -# $Id: README.osst.kernel,v 1.4 2000/12/20 14:13:15 garloff Exp $ -major=206 -nrs=4 -dir=/dev -test -z "$1" || nrs=$1 -test -z "$2" || dir=$2 -declare -i nr -nr=0 -test -d $dir || mkdir -p $dir -while test $nr -lt $nrs; do - mknod $dir/osst$nr c $major $nr - chown 0.disk $dir/osst$nr; chmod 660 $dir/osst$nr; - mknod $dir/nosst$nr c $major $[nr+128] - chown 0.disk $dir/nosst$nr; chmod 660 $dir/nosst$nr; - mknod $dir/osst${nr}l c $major $[nr+32] - chown 0.disk $dir/osst${nr}l; chmod 660 $dir/osst${nr}l; - mknod $dir/nosst${nr}l c $major $[nr+160] - chown 0.disk $dir/nosst${nr}l; chmod 660 $dir/nosst${nr}l; - mknod $dir/osst${nr}m c $major $[nr+64] - chown 0.disk $dir/osst${nr}m; chmod 660 $dir/osst${nr}m; - mknod $dir/nosst${nr}m c $major $[nr+192] - chown 0.disk $dir/nosst${nr}m; chmod 660 $dir/nosst${nr}m; - mknod $dir/osst${nr}a c $major $[nr+96] - chown 0.disk $dir/osst${nr}a; chmod 660 $dir/osst${nr}a; - mknod $dir/nosst${nr}a c $major $[nr+224] - chown 0.disk $dir/nosst${nr}a; chmod 660 $dir/nosst${nr}a; - let nr+=1 -done diff --git a/MAINTAINERS b/MAINTAINERS index 5cfbea4ce575..adfb7ffb40ca 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11662,16 +11662,6 @@ S: Maintained F: drivers/mtd/nand/onenand/ F: include/linux/mtd/onenand*.h -ONSTREAM SCSI TAPE DRIVER -M: Willem Riede <osst@riede.org> -L: osst-users@lists.sourceforge.net -L: linux-scsi@vger.kernel.org -S: Maintained -F: Documentation/scsi/osst.txt -F: drivers/scsi/osst.* -F: drivers/scsi/osst_*.h -F: drivers/scsi/st.h - OP-TEE DRIVER M: Jens Wiklander <jens.wiklander@linaro.org> S: Maintained diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index d528018e6fa8..d81edb6ae9e3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -98,28 +98,6 @@ config CHR_DEV_ST To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. The module will be called st. -config CHR_DEV_OSST - tristate "SCSI OnStream SC-x0 tape support" - depends on SCSI - ---help--- - The OnStream SC-x0 SCSI tape drives cannot be driven by the - standard st driver, but instead need this special osst driver and - use the /dev/osstX char device nodes (major 206). Via usb-storage, - you may be able to drive the USB-x0 and DI-x0 drives as well. - Note that there is also a second generation of OnStream - tape drives (ADR-x0) that supports the standard SCSI-2 commands for - tapes (QIC-157) and can be driven by the standard driver st. - For more information, you may have a look at the SCSI-HOWTO - <http://www.tldp.org/docs.html#howto> and - <file:Documentation/scsi/osst.txt> in the kernel source. - More info on the OnStream driver may be found on - <http://sourceforge.net/projects/osst/> - Please also have a look at the standard st docu, as most of it - applies to osst as well. - - To compile this driver as a module, choose M here and read - <file:Documentation/scsi/scsi.txt>. The module will be called osst. - config BLK_DEV_SR tristate "SCSI CDROM support" depends on SCSI && BLK_DEV diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 8826111fdf4a..f69ee35af2c8 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -143,7 +143,6 @@ obj-$(CONFIG_SCSI_WD719X) += wd719x.o obj-$(CONFIG_ARM) += arm/ obj-$(CONFIG_CHR_DEV_ST) += st.o -obj-$(CONFIG_CHR_DEV_OSST) += osst.o obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o obj-$(CONFIG_CHR_DEV_SG) += sg.o diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c deleted file mode 100644 index 4bad54463eb2..000000000000 --- a/drivers/scsi/osst.c +++ /dev/null @@ -1,6107 +0,0 @@ -/* - SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying - file Documentation/scsi/st.txt for more information. - - History: - - OnStream SCSI Tape support (osst) cloned from st.c by - Willem Riede (osst@riede.org) Feb 2000 - Fixes ... Kurt Garloff <garloff@suse.de> Mar 2000 - - Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara. - Contribution and ideas from several people including (in alphabetical - order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer, - Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale. - - Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede - email osst@riede.org - - $Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ - - Microscopic alterations - Rik Ling, 2000/12/21 - Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara - Some small formal changes - aeb, 950809 -*/ - -static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $"; -static const char * osst_version = "0.99.4"; - -/* The "failure to reconnect" firmware bug */ -#define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/ -#define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/ -#define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7) - -#include <linux/module.h> - -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/sched/signal.h> -#include <linux/proc_fs.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/mtio.h> -#include <linux/ioctl.h> -#include <linux/fcntl.h> -#include <linux/spinlock.h> -#include <linux/vmalloc.h> -#include <linux/blkdev.h> -#include <linux/moduleparam.h> -#include <linux/delay.h> -#include <linux/jiffies.h> -#include <linux/mutex.h> -#include <linux/uaccess.h> -#include <asm/dma.h> - -/* The driver prints some debugging information on the console if DEBUG - is defined and non-zero. */ -#define DEBUG 0 - -/* The message level for the debug messages is currently set to KERN_NOTICE - so that people can easily see the messages. Later when the debugging messages - in the drivers are more widely classified, this may be changed to KERN_DEBUG. */ -#define OSST_DEB_MSG KERN_NOTICE - -#include <scsi/scsi.h> -#include <scsi/scsi_dbg.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_driver.h> -#include <scsi/scsi_eh.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_ioctl.h> - -#define ST_KILOBYTE 1024 - -#include "st.h" -#include "osst.h" -#include "osst_options.h" -#include "osst_detect.h" - -static DEFINE_MUTEX(osst_int_mutex); -static int max_dev = 0; -static int write_threshold_kbs = 0; -static int max_sg_segs = 0; - -#ifdef MODULE -MODULE_AUTHOR("Willem Riede"); -MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR); -MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE); - -module_param(max_dev, int, 0444); -MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)"); - -module_param(write_threshold_kbs, int, 0644); -MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)"); - -module_param(max_sg_segs, int, 0644); -MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)"); -#else -static struct osst_dev_parm { - char *name; - int *val; -} parms[] __initdata = { - { "max_dev", &max_dev }, - { "write_threshold_kbs", &write_threshold_kbs }, - { "max_sg_segs", &max_sg_segs } -}; -#endif - -/* Some default definitions have been moved to osst_options.h */ -#define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE) -#define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE) - -/* The buffer size should fit into the 24 bits for length in the - 6-byte SCSI read and write commands. */ -#if OSST_BUFFER_SIZE >= (2 << 24 - 1) -#error "Buffer size should not exceed (2 << 24 - 1) bytes!" -#endif - -#if DEBUG -static int debugging = 1; -/* uncomment define below to test error recovery */ -// #define OSST_INJECT_ERRORS 1 -#endif - -/* Do not retry! The drive firmware already retries when appropriate, - and when it tries to tell us something, we had better listen... */ -#define MAX_RETRIES 0 - -#define NO_TAPE NOT_READY - -#define OSST_WAIT_POSITION_COMPLETE (HZ > 200 ? HZ / 200 : 1) -#define OSST_WAIT_WRITE_COMPLETE (HZ / 12) -#define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2) - -#define OSST_TIMEOUT (200 * HZ) -#define OSST_LONG_TIMEOUT (1800 * HZ) - -#define TAPE_NR(x) (iminor(x) & ((1 << ST_MODE_SHIFT)-1)) -#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT) -#define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0) -#define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1)) - -/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower - 24 bits) */ -#define SET_DENS_AND_BLK 0x10001 - -static int osst_buffer_size = OSST_BUFFER_SIZE; -static int osst_write_threshold = OSST_WRITE_THRESHOLD; -static int osst_max_sg_segs = OSST_MAX_SG; -static int osst_max_dev = OSST_MAX_TAPES; -static int osst_nr_dev; - -static struct osst_tape **os_scsi_tapes = NULL; -static DEFINE_RWLOCK(os_scsi_tapes_lock); - -static int modes_defined = 0; - -static struct osst_buffer *new_tape_buffer(int, int, int); -static int enlarge_buffer(struct osst_buffer *, int); -static void normalize_buffer(struct osst_buffer *); -static int append_to_buffer(const char __user *, struct osst_buffer *, int); -static int from_buffer(struct osst_buffer *, char __user *, int); -static int osst_zero_buffer_tail(struct osst_buffer *); -static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *); -static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *); - -static int osst_probe(struct device *); -static int osst_remove(struct device *); - -static struct scsi_driver osst_template = { - .gendrv = { - .name = "osst", - .owner = THIS_MODULE, - .probe = osst_probe, - .remove = osst_remove, - } -}; - -static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt, - unsigned int cmd_in, unsigned long arg); - -static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip); - -static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt); - -static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt); - -static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending); - -static inline char *tape_name(struct osst_tape *tape) -{ - return tape->drive->disk_name; -} - -/* Routines that handle the interaction with mid-layer SCSI routines */ - - -/* Normalize Sense */ -static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s) -{ - const u8 *ucp; - const u8 *sense = SRpnt->sense; - - s->have_sense = scsi_normalize_sense(SRpnt->sense, - SCSI_SENSE_BUFFERSIZE, &s->sense_hdr); - s->flags = 0; - - if (s->have_sense) { - s->deferred = 0; - s->remainder_valid = - scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64); - switch (sense[0] & 0x7f) { - case 0x71: - s->deferred = 1; - /* fall through */ - case 0x70: - s->fixed_format = 1; - s->flags = sense[2] & 0xe0; - break; - case 0x73: - s->deferred = 1; - /* fall through */ - case 0x72: - s->fixed_format = 0; - ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4); - s->flags = ucp ? (ucp[3] & 0xe0) : 0; - break; - } - } -} - -/* Convert the result to success code */ -static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) -{ - char *name = tape_name(STp); - int result = SRpnt->result; - u8 * sense = SRpnt->sense, scode; -#if DEBUG - const char *stp; -#endif - struct st_cmdstatus *cmdstatp; - - if (!result) - return 0; - - cmdstatp = &STp->buffer->cmdstat; - osst_analyze_sense(SRpnt, cmdstatp); - - if (cmdstatp->have_sense) - scode = STp->buffer->cmdstat.sense_hdr.sense_key; - else - scode = 0; -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n", - name, result, - SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], - SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); - if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n", - name, scode, sense[12], sense[13]); - if (cmdstatp->have_sense) - __scsi_print_sense(STp->device, name, - SRpnt->sense, SCSI_SENSE_BUFFERSIZE); - } - else -#endif - if (cmdstatp->have_sense && ( - scode != NO_SENSE && - scode != RECOVERED_ERROR && -/* scode != UNIT_ATTENTION && */ - scode != BLANK_CHECK && - scode != VOLUME_OVERFLOW && - SRpnt->cmd[0] != MODE_SENSE && - SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */ - if (cmdstatp->have_sense) { - printk(KERN_WARNING "%s:W: Command with sense data:\n", name); - __scsi_print_sense(STp->device, name, - SRpnt->sense, SCSI_SENSE_BUFFERSIZE); - } - else { - static int notyetprinted = 1; - - printk(KERN_WARNING - "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n", - name, result, driver_byte(result), - host_byte(result)); - if (notyetprinted) { - notyetprinted = 0; - printk(KERN_INFO - "%s:I: This warning may be caused by your scsi controller,\n", name); - printk(KERN_INFO - "%s:I: it has been reported with some Buslogic cards.\n", name); - } - } - } - STp->pos_unknown |= STp->device->was_reset; - - if (cmdstatp->have_sense && scode == RECOVERED_ERROR) { - STp->recover_count++; - STp->recover_erreg++; -#if DEBUG - if (debugging) { - if (SRpnt->cmd[0] == READ_6) - stp = "read"; - else if (SRpnt->cmd[0] == WRITE_6) - stp = "write"; - else - stp = "ioctl"; - printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp, - STp->recover_count); - } -#endif - if ((sense[2] & 0xe0) == 0) - return 0; - } - return (-EIO); -} - - -/* Wakeup from interrupt */ -static void osst_end_async(struct request *req, blk_status_t status) -{ - struct scsi_request *rq = scsi_req(req); - struct osst_request *SRpnt = req->end_io_data; - struct osst_tape *STp = SRpnt->stp; - struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; - - STp->buffer->cmdstat.midlevel_result = SRpnt->result = rq->result; -#if DEBUG - STp->write_pending = 0; -#endif - if (rq->sense_len) - memcpy(SRpnt->sense, rq->sense, SCSI_SENSE_BUFFERSIZE); - if (SRpnt->waiting) - complete(SRpnt->waiting); - - if (SRpnt->bio) { - kfree(mdata->pages); - blk_rq_unmap_user(SRpnt->bio); - } - - blk_put_request(req); -} - -/* osst_request memory management */ -static struct osst_request *osst_allocate_request(void) -{ - return kzalloc(sizeof(struct osst_request), GFP_KERNEL); -} - -static void osst_release_request(struct osst_request *streq) -{ - kfree(streq); -} - -static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd, - int cmd_len, int data_direction, void *buffer, unsigned bufflen, - int use_sg, int timeout, int retries) -{ - struct request *req; - struct scsi_request *rq; - struct page **pages = NULL; - struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; - - int err = 0; - int write = (data_direction == DMA_TO_DEVICE); - - req = blk_get_request(SRpnt->stp->device->request_queue, - write ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0); - if (IS_ERR(req)) - return DRIVER_ERROR << 24; - - rq = scsi_req(req); - req->rq_flags |= RQF_QUIET; - - SRpnt->bio = NULL; - - if (use_sg) { - struct scatterlist *sg, *sgl = (struct scatterlist *)buffer; - int i; - - pages = kcalloc(use_sg, sizeof(struct page *), GFP_KERNEL); - if (!pages) - goto free_req; - - for_each_sg(sgl, sg, use_sg, i) - pages[i] = sg_page(sg); - - mdata->null_mapped = 1; - - mdata->page_order = get_order(sgl[0].length); - mdata->nr_entries = - DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order); - mdata->offset = 0; - - err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL); - if (err) { - kfree(pages); - goto free_req; - } - SRpnt->bio = req->bio; - mdata->pages = pages; - - } else if (bufflen) { - err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL); - if (err) - goto free_req; - } - - rq->cmd_len = cmd_len; - memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ - memcpy(rq->cmd, cmd, rq->cmd_len); - req->timeout = timeout; - rq->retries = retries; - req->end_io_data = SRpnt; - - blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async); - return 0; -free_req: - blk_put_request(req); - return DRIVER_ERROR << 24; -} - -/* Do the scsi command. Waits until command performed if do_wait is true. - Otherwise osst_write_behind_check() is used to check that the command - has finished. */ -static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp, - unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait) -{ - unsigned char *bp; - unsigned short use_sg; -#ifdef OSST_INJECT_ERRORS - static int inject = 0; - static int repeat = 0; -#endif - struct completion *waiting; - - /* if async, make sure there's no command outstanding */ - if (!do_wait && ((STp->buffer)->last_SRpnt)) { - printk(KERN_ERR "%s: Async command already active.\n", - tape_name(STp)); - if (signal_pending(current)) - (STp->buffer)->syscall_result = (-EINTR); - else - (STp->buffer)->syscall_result = (-EBUSY); - return NULL; - } - - if (SRpnt == NULL) { - SRpnt = osst_allocate_request(); - if (SRpnt == NULL) { - printk(KERN_ERR "%s: Can't allocate SCSI request.\n", - tape_name(STp)); - if (signal_pending(current)) - (STp->buffer)->syscall_result = (-EINTR); - else - (STp->buffer)->syscall_result = (-EBUSY); - return NULL; - } - SRpnt->stp = STp; - } - - /* If async IO, set last_SRpnt. This ptr tells write_behind_check - which IO is outstanding. It's nulled out when the IO completes. */ - if (!do_wait) - (STp->buffer)->last_SRpnt = SRpnt; - - waiting = &STp->wait; - init_completion(waiting); - SRpnt->waiting = waiting; - - use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0; - if (use_sg) { - bp = (char *)&(STp->buffer->sg[0]); - if (STp->buffer->sg_segs < use_sg) - use_sg = STp->buffer->sg_segs; - } - else - bp = (STp->buffer)->b_data; - - memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); - STp->buffer->cmdstat.have_sense = 0; - STp->buffer->syscall_result = 0; - - if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, - use_sg, timeout, retries)) - /* could not allocate the buffer or request was too large */ - (STp->buffer)->syscall_result = (-EBUSY); - else if (do_wait) { - wait_for_completion(waiting); - SRpnt->waiting = NULL; - STp->buffer->syscall_result = osst_chk_result(STp, SRpnt); -#ifdef OSST_INJECT_ERRORS - if (STp->buffer->syscall_result == 0 && - cmd[0] == READ_6 && - cmd[4] && - ( (++ inject % 83) == 29 || - (STp->first_frame_position == 240 - /* or STp->read_error_frame to fail again on the block calculated above */ && - ++repeat < 3))) { - printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp)); - STp->buffer->last_result_fatal = 1; - } -#endif - } - return SRpnt; -} - - -/* Handle the write-behind checking (downs the semaphore) */ -static void osst_write_behind_check(struct osst_tape *STp) -{ - struct osst_buffer * STbuffer; - - STbuffer = STp->buffer; - -#if DEBUG - if (STp->write_pending) - STp->nbr_waits++; - else - STp->nbr_finished++; -#endif - wait_for_completion(&(STp->wait)); - STp->buffer->last_SRpnt->waiting = NULL; - - STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt); - - if (STp->buffer->syscall_result) - STp->buffer->syscall_result = - osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1); - else - STp->first_frame_position++; - - osst_release_request(STp->buffer->last_SRpnt); - - if (STbuffer->writing < STbuffer->buffer_bytes) - printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n"); - - STbuffer->last_SRpnt = NULL; - STbuffer->buffer_bytes -= STbuffer->writing; - STbuffer->writing = 0; - - return; -} - - - -/* Onstream specific Routines */ -/* - * Initialize the OnStream AUX - */ -static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number, - int logical_blk_num, int blk_sz, int blk_cnt) -{ - os_aux_t *aux = STp->buffer->aux; - os_partition_t *par = &aux->partition; - os_dat_t *dat = &aux->dat; - - if (STp->raw) return; - - memset(aux, 0, sizeof(*aux)); - aux->format_id = htonl(0); - memcpy(aux->application_sig, "LIN4", 4); - aux->hdwr = htonl(0); - aux->frame_type = frame_type; - - switch (frame_type) { - case OS_FRAME_TYPE_HEADER: - aux->update_frame_cntr = htonl(STp->update_frame_cntr); - par->partition_num = OS_CONFIG_PARTITION; - par->par_desc_ver = OS_PARTITION_VERSION; - par->wrt_pass_cntr = htons(0xffff); - /* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */ - par->first_frame_ppos = htonl(0); - par->last_frame_ppos = htonl(0xbb7); - aux->frame_seq_num = htonl(0); - aux->logical_blk_num_high = htonl(0); - aux->logical_blk_num = htonl(0); - aux->next_mark_ppos = htonl(STp->first_mark_ppos); - break; - case OS_FRAME_TYPE_DATA: - case OS_FRAME_TYPE_MARKER: - dat->dat_sz = 8; - dat->reserved1 = 0; - dat->entry_cnt = 1; - dat->reserved3 = 0; - dat->dat_list[0].blk_sz = htonl(blk_sz); - dat->dat_list[0].blk_cnt = htons(blk_cnt); - dat->dat_list[0].flags = frame_type==OS_FRAME_TYPE_MARKER? - OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA; - dat->dat_list[0].reserved = 0; - /* fall through */ - case OS_FRAME_TYPE_EOD: - aux->update_frame_cntr = htonl(0); - par->partition_num = OS_DATA_PARTITION; - par->par_desc_ver = OS_PARTITION_VERSION; - par->wrt_pass_cntr = htons(STp->wrt_pass_cntr); - par->first_frame_ppos = htonl(STp->first_data_ppos); - par->last_frame_ppos = htonl(STp->capacity); - aux->frame_seq_num = htonl(frame_seq_number); - aux->logical_blk_num_high = htonl(0); - aux->logical_blk_num = htonl(logical_blk_num); - break; - default: ; /* probably FILL */ - } - aux->filemark_cnt = htonl(STp->filemark_cnt); - aux->phys_fm = htonl(0xffffffff); - aux->last_mark_ppos = htonl(STp->last_mark_ppos); - aux->last_mark_lbn = htonl(STp->last_mark_lbn); -} - -/* - * Verify that we have the correct tape frame - */ -static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet) -{ - char * name = tape_name(STp); - os_aux_t * aux = STp->buffer->aux; - os_partition_t * par = &(aux->partition); - struct st_partstat * STps = &(STp->ps[STp->partition]); - unsigned int blk_cnt, blk_sz, i; - - if (STp->raw) { - if (STp->buffer->syscall_result) { - for (i=0; i < STp->buffer->sg_segs; i++) - memset(page_address(sg_page(&STp->buffer->sg[i])), - 0, STp->buffer->sg[i].length); - strcpy(STp->buffer->b_data, "READ ERROR ON FRAME"); - } else - STp->buffer->buffer_bytes = OS_FRAME_SIZE; - return 1; - } - if (STp->buffer->syscall_result) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name); -#endif - return 0; - } - if (ntohl(aux->format_id) != 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id)); -#endif - goto err_out; - } - if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 && - (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name); -#endif - goto err_out; - } - if (par->partition_num != OS_DATA_PARTITION) { - if (!STp->linux_media || STp->linux_media_version != 2) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n", - name, par->partition_num); -#endif - goto err_out; - } - } - if (par->par_desc_ver != OS_PARTITION_VERSION) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver); -#endif - goto err_out; - } - if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n", - name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr); -#endif - goto err_out; - } - if (aux->frame_type != OS_FRAME_TYPE_DATA && - aux->frame_type != OS_FRAME_TYPE_EOD && - aux->frame_type != OS_FRAME_TYPE_MARKER) { - if (!quiet) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type); -#endif - } - goto err_out; - } - if (aux->frame_type == OS_FRAME_TYPE_EOD && - STp->first_frame_position < STp->eod_frame_ppos) { - printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name, - STp->first_frame_position); - goto err_out; - } - if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) { - if (!quiet) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n", - name, ntohl(aux->frame_seq_num), frame_seq_number); -#endif - } - goto err_out; - } - if (aux->frame_type == OS_FRAME_TYPE_MARKER) { - STps->eof = ST_FM_HIT; - - i = ntohl(aux->filemark_cnt); - if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt || - STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name, - STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected", - i, STp->first_frame_position - 1); -#endif - STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1); - if (i >= STp->filemark_cnt) - STp->filemark_cnt = i+1; - } - } - if (aux->frame_type == OS_FRAME_TYPE_EOD) { - STps->eof = ST_EOD_1; - STp->frame_in_buffer = 1; - } - if (aux->frame_type == OS_FRAME_TYPE_DATA) { - blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt); - blk_sz = ntohl(aux->dat.dat_list[0].blk_sz); - STp->buffer->buffer_bytes = blk_cnt * blk_sz; - STp->buffer->read_pointer = 0; - STp->frame_in_buffer = 1; - - /* See what block size was used to write file */ - if (STp->block_size != blk_sz && blk_sz > 0) { - printk(KERN_INFO - "%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n", - name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k', - STp->block_size<1024?STp->block_size:STp->block_size/1024, - STp->block_size<1024?'b':'k'); - STp->block_size = blk_sz; - STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz; - } - STps->eof = ST_NOEOF; - } - STp->frame_seq_number = ntohl(aux->frame_seq_num); - STp->logical_blk_num = ntohl(aux->logical_blk_num); - return 1; - -err_out: - if (STp->read_error_frame == 0) - STp->read_error_frame = STp->first_frame_position - 1; - return 0; -} - -/* - * Wait for the unit to become Ready - */ -static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned timeout, int initial_delay) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name); -#endif - - if (initial_delay > 0) - msleep(jiffies_to_msecs(initial_delay)); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) return (-EBUSY); - - while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && - (( SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 && - (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8) ) || - ( SRpnt->sense[2] == 6 && SRpnt->sense[12] == 0x28 && - SRpnt->sense[13] == 0 ) )) { -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - msleep(100); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - } - *aSRpnt = SRpnt; -#if DEBUG - debugging = dbg; -#endif - if ( STp->buffer->syscall_result && - osst_write_error_recovery(STp, aSRpnt, 0) ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name, - STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2], - SRpnt->sense[12], SRpnt->sense[13]); -#endif - return (-EIO); - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name); -#endif - return 0; -} - -/* - * Wait for a tape to be inserted in the unit - */ -static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name); -#endif - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) return (-EBUSY); - - while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && - SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0 ) { -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - msleep(100); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - } - *aSRpnt = SRpnt; -#if DEBUG - debugging = dbg; -#endif - if ( STp->buffer->syscall_result && SRpnt->sense[2] != 2 && - SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name); - printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name, - STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2], - SRpnt->sense[12], SRpnt->sense[13]); -#endif - return 0; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name); -#endif - return 1; -} - -static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame) -{ - int retval; - - osst_wait_ready(STp, aSRpnt, 15 * 60, 0); /* TODO - can this catch a write error? */ - retval = osst_set_frame_position(STp, aSRpnt, frame, 0); - if (retval) return (retval); - osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE); - return (osst_get_frame_position(STp, aSRpnt)); -} - -/* - * Wait for write(s) to complete - */ -static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int result = 0; - int delay = OSST_WAIT_WRITE_COMPLETE; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name); -#endif - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_FILEMARKS; - cmd[1] = 1; - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) return (-EBUSY); - if (STp->buffer->syscall_result) { - if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) { - if (SRpnt->sense[13] == 8) { - delay = OSST_WAIT_LONG_WRITE_COMPLETE; - } - } else - result = osst_write_error_recovery(STp, aSRpnt, 0); - } - result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay); - STp->ps[STp->partition].rw = OS_WRITING_COMPLETE; - - return (result); -} - -#define OSST_POLL_PER_SEC 10 -static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to) -{ - unsigned long startwait = jiffies; - char * name = tape_name(STp); -#if DEBUG - char notyetprinted = 1; -#endif - if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING) - printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name); - - while (time_before (jiffies, startwait + to*HZ)) - { - int result; - result = osst_get_frame_position(STp, aSRpnt); - if (result == -EIO) - if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0) - return 0; /* successful recovery leaves drive ready for frame */ - if (result < 0) break; - if (STp->first_frame_position == curr && - ((minlast < 0 && - (signed)STp->last_frame_position > (signed)curr + minlast) || - (minlast >= 0 && STp->cur_frames > minlast) - ) && result >= 0) - { -#if DEBUG - if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC)) - printk (OSST_DEB_MSG - "%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n", - name, curr, curr+minlast, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames, - result, (jiffies-startwait)/HZ, - (((jiffies-startwait)%HZ)*10)/HZ); -#endif - return 0; - } -#if DEBUG - if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted) - { - printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n", - name, curr, curr+minlast, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames, result); - notyetprinted--; - } -#endif - msleep(1000 / OSST_POLL_PER_SEC); - } -#if DEBUG - printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n", - name, curr, curr+minlast, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames, - (jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ); -#endif - return -EBUSY; -} - -static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing) -{ - struct osst_request * SRpnt; - unsigned char cmd[MAX_COMMAND_SIZE]; - unsigned long startwait = jiffies; - int retval = 1; - char * name = tape_name(STp); - - if (writing) { - char mybuf[24]; - char * olddata = STp->buffer->b_data; - int oldsize = STp->buffer->buffer_size; - - /* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */ - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_FILEMARKS; - cmd[1] = 1; - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, - MAX_RETRIES, 1); - - while (retval && time_before (jiffies, startwait + 5*60*HZ)) { - - if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) { - - /* some failure - not just not-ready */ - retval = osst_write_error_recovery(STp, aSRpnt, 0); - break; - } - schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC); - - STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = READ_POSITION; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout, - MAX_RETRIES, 1); - - retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 ); - STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; - } - if (retval) - printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name); - } else - /* TODO - figure out which error conditions can be handled */ - if (STp->buffer->syscall_result) - printk(KERN_WARNING - "%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name, - (*aSRpnt)->sense[ 2] & 0x0f, - (*aSRpnt)->sense[12], - (*aSRpnt)->sense[13]); - - return retval; -} - -/* - * Read the next OnStream tape frame at the current location - */ -static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int retval = 0; -#if DEBUG - os_aux_t * aux = STp->buffer->aux; - char * name = tape_name(STp); -#endif - - if (STp->poll) - if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout)) - retval = osst_recover_wait_frame(STp, aSRpnt, 0); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = READ_6; - cmd[1] = 1; - cmd[4] = 1; - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name); -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) - return (-EBUSY); - - if ((STp->buffer)->syscall_result) { - retval = 1; - if (STp->read_error_frame == 0) { - STp->read_error_frame = STp->first_frame_position; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame); -#endif - } -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", - name, - SRpnt->sense[0], SRpnt->sense[1], - SRpnt->sense[2], SRpnt->sense[3], - SRpnt->sense[4], SRpnt->sense[5], - SRpnt->sense[6], SRpnt->sense[7]); -#endif - } - else - STp->first_frame_position++; -#if DEBUG - if (debugging) { - char sig[8]; int i; - for (i=0;i<4;i++) - sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i]; - sig[4] = '\0'; - printk(OSST_DEB_MSG - "%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig, - ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr), - aux->frame_type==1?"EOD":aux->frame_type==2?"MARK": - aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL", - ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), - ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) ); - if (aux->frame_type==2) - printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name, - ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn)); - printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval); - } -#endif - return (retval); -} - -static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - struct osst_request * SRpnt ; - unsigned char cmd[MAX_COMMAND_SIZE]; - int retval = 0; - char * name = tape_name(STp); - - if (STps->rw != ST_READING) { /* Initialize read operation */ - if (STps->rw == ST_WRITING || STp->dirty) { - STp->write_type = OS_WRITE_DATA; - osst_flush_write_buffer(STp, aSRpnt); - osst_flush_drive_buffer(STp, aSRpnt); - } - STps->rw = ST_READING; - STp->frame_in_buffer = 0; - - /* - * Issue a read 0 command to get the OnStream drive - * read frames into its buffer. - */ - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = READ_6; - cmd[1] = 1; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name); -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if ((retval = STp->buffer->syscall_result)) - printk(KERN_WARNING "%s:W: Error starting read ahead\n", name); - } - - return retval; -} - -static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, - int frame_seq_number, int quiet) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - char * name = tape_name(STp); - int cnt = 0, - bad = 0, - past = 0, - x, - position; - - /* - * If we want just any frame (-1) and there is a frame in the buffer, return it - */ - if (frame_seq_number == -1 && STp->frame_in_buffer) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number); -#endif - return (STps->eof); - } - /* - * Search and wait for the next logical tape frame - */ - while (1) { - if (cnt++ > 400) { - printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n", - name, frame_seq_number); - if (STp->read_error_frame) { - osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n", - name, STp->read_error_frame); -#endif - STp->read_error_frame = 0; - STp->abort_count++; - } - return (-EIO); - } -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n", - name, frame_seq_number, cnt); -#endif - if ( osst_initiate_read(STp, aSRpnt) - || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) { - if (STp->raw) - return (-EIO); - position = osst_get_frame_position(STp, aSRpnt); - if (position >= 0xbae && position < 0xbb8) - position = 0xbb8; - else if (position > STp->eod_frame_ppos || ++bad == 10) { - position = STp->read_error_frame - 1; - bad = 0; - } - else { - position += 29; - cnt += 19; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n", - name, position); -#endif - osst_set_frame_position(STp, aSRpnt, position, 0); - continue; - } - if (osst_verify_frame(STp, frame_seq_number, quiet)) - break; - if (osst_verify_frame(STp, -1, quiet)) { - x = ntohl(STp->buffer->aux->frame_seq_num); - if (STp->fast_open) { - printk(KERN_WARNING - "%s:W: Found logical frame %d instead of %d after fast open\n", - name, x, frame_seq_number); - STp->header_ok = 0; - STp->read_error_frame = 0; - return (-EIO); - } - if (x > frame_seq_number) { - if (++past > 3) { - /* positioning backwards did not bring us to the desired frame */ - position = STp->read_error_frame - 1; - } - else { - position = osst_get_frame_position(STp, aSRpnt) - + frame_seq_number - x - 1; - - if (STp->first_frame_position >= 3000 && position < 3000) - position -= 10; - } -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Found logical frame %d while looking for %d: back up %d\n", - name, x, frame_seq_number, - STp->first_frame_position - position); -#endif - osst_set_frame_position(STp, aSRpnt, position, 0); - cnt += 10; - } - else - past = 0; - } - if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name); -#endif - osst_set_frame_position(STp, aSRpnt, 0xbb8, 0); - cnt--; - } - STp->frame_in_buffer = 0; - } - if (cnt > 1) { - STp->recover_count++; - STp->recover_erreg++; - printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n", - name, STp->read_error_frame); - } - STp->read_count++; - -#if DEBUG - if (debugging || STps->eof) - printk(OSST_DEB_MSG - "%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n", - name, frame_seq_number, STp->frame_seq_number, STps->eof); -#endif - STp->fast_open = 0; - STp->read_error_frame = 0; - return (STps->eof); -} - -static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - char * name = tape_name(STp); - int retries = 0; - int frame_seq_estimate, ppos_estimate, move; - - if (logical_blk_num < 0) logical_blk_num = 0; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n", - name, logical_blk_num, STp->logical_blk_num, - STp->block_size<1024?STp->block_size:STp->block_size/1024, - STp->block_size<1024?'b':'k'); -#endif - /* Do we know where we are? */ - if (STps->drv_block >= 0) { - move = logical_blk_num - STp->logical_blk_num; - if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; - move /= (OS_DATA_SIZE / STp->block_size); - frame_seq_estimate = STp->frame_seq_number + move; - } else - frame_seq_estimate = logical_blk_num * STp->block_size / OS_DATA_SIZE; - - if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10; - else ppos_estimate = frame_seq_estimate + 20; - while (++retries < 10) { - if (ppos_estimate > STp->eod_frame_ppos-2) { - frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate; - ppos_estimate = STp->eod_frame_ppos - 2; - } - if (frame_seq_estimate < 0) { - frame_seq_estimate = 0; - ppos_estimate = 10; - } - osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0); - if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) { - /* we've located the estimated frame, now does it have our block? */ - if (logical_blk_num < STp->logical_blk_num || - logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) { - if (STps->eof == ST_FM_HIT) - move = logical_blk_num < STp->logical_blk_num? -2 : 1; - else { - move = logical_blk_num - STp->logical_blk_num; - if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; - move /= (OS_DATA_SIZE / STp->block_size); - } - if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1; -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n", - name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, - STp->logical_blk_num, logical_blk_num, move); -#endif - frame_seq_estimate += move; - ppos_estimate += move; - continue; - } else { - STp->buffer->read_pointer = (logical_blk_num - STp->logical_blk_num) * STp->block_size; - STp->buffer->buffer_bytes -= STp->buffer->read_pointer; - STp->logical_blk_num = logical_blk_num; -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n", - name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer, - STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size, - STp->block_size); -#endif - STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); - if (STps->eof == ST_FM_HIT) { - STps->drv_file++; - STps->drv_block = 0; - } else { - STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? - STp->logical_blk_num - - (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): - -1; - } - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; - return 0; - } - } - if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0) - goto error; - /* we are not yet at the estimated frame, adjust our estimate of its physical position */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n", - name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate, - STp->logical_blk_num, logical_blk_num); -#endif - if (frame_seq_estimate != STp->frame_seq_number) - ppos_estimate += frame_seq_estimate - STp->frame_seq_number; - else - break; - } -error: - printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n", - name, logical_blk_num, STp->logical_blk_num, retries); - return (-EIO); -} - -/* The values below are based on the OnStream frame payload size of 32K == 2**15, - * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block - * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions - * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1. - */ -#define OSST_FRAME_SHIFT 6 -#define OSST_SECTOR_SHIFT 9 -#define OSST_SECTOR_MASK 0x03F - -static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int sector; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG - "%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n", - name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, - STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block, - STp->ps[STp->partition].rw == ST_WRITING?'w':'r', - STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes: - STp->buffer->read_pointer, STp->ps[STp->partition].eof); -#endif - /* do we know where we are inside a file? */ - if (STp->ps[STp->partition].drv_block >= 0) { - sector = (STp->frame_in_buffer ? STp->first_frame_position-1 : - STp->first_frame_position) << OSST_FRAME_SHIFT; - if (STp->ps[STp->partition].rw == ST_WRITING) - sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; - else - sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; - } else { - sector = osst_get_frame_position(STp, aSRpnt); - if (sector > 0) - sector <<= OSST_FRAME_SHIFT; - } - return sector; -} - -static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - int frame = sector >> OSST_FRAME_SHIFT, - offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT, - r; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n", - name, sector, frame, offset); -#endif - if (frame < 0 || frame >= STp->capacity) return (-ENXIO); - - if (frame <= STp->first_data_ppos) { - STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0; - return (osst_set_frame_position(STp, aSRpnt, frame, 0)); - } - r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0); - if (r < 0) return r; - - r = osst_get_logical_frame(STp, aSRpnt, -1, 1); - if (r < 0) return r; - - if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO); - - if (offset) { - STp->logical_blk_num += offset / STp->block_size; - STp->buffer->read_pointer = offset; - STp->buffer->buffer_bytes -= offset; - } else { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; - } - STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); - if (STps->eof == ST_FM_HIT) { - STps->drv_file++; - STps->drv_block = 0; - } else { - STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? - STp->logical_blk_num - - (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): - -1; - } - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n", - name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, - STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof); -#endif - return 0; -} - -/* - * Read back the drive's internal buffer contents, as a part - * of the write error recovery mechanism for old OnStream - * firmware revisions. - * Precondition for this function to work: all frames in the - * drive's buffer must be of one type (DATA, MARK or EOD)! - */ -static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned int frame, unsigned int skip, int pending) -{ - struct osst_request * SRpnt = * aSRpnt; - unsigned char * buffer, * p; - unsigned char cmd[MAX_COMMAND_SIZE]; - int flag, new_frame, i; - int nframes = STp->cur_frames; - int blks_per_frame = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - int frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num) - - (nframes + pending - 1); - int logical_blk_num = ntohl(STp->buffer->aux->logical_blk_num) - - (nframes + pending - 1) * blks_per_frame; - char * name = tape_name(STp); - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; -#endif - - if ((buffer = vmalloc(array_size((nframes + 1), OS_DATA_SIZE))) == NULL) - return (-EIO); - - printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n", - name, nframes, pending?" and one that was pending":""); - - osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE])); -#if DEBUG - if (pending && debugging) - printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n", - name, frame_seq_number + nframes, - logical_blk_num + nframes * blks_per_frame, - p[0], p[1], p[2], p[3]); -#endif - for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = 0x3C; /* Buffer Read */ - cmd[1] = 6; /* Retrieve Faulty Block */ - cmd[7] = 32768 >> 8; - cmd[8] = 32768 & 0xff; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); - - if ((STp->buffer)->syscall_result || !SRpnt) { - printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name); - vfree(buffer); - *aSRpnt = SRpnt; - return (-EIO); - } - osst_copy_from_buffer(STp->buffer, p); -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n", - name, frame_seq_number + i, p[0], p[1], p[2], p[3]); -#endif - } - *aSRpnt = SRpnt; - osst_get_frame_position(STp, aSRpnt); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames); -#endif - /* Write synchronously so we can be sure we're OK again and don't have to recover recursively */ - /* In the header we don't actually re-write the frames that fail, just the ones after them */ - - for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) { - - if (flag) { - if (STp->write_type == OS_WRITE_HEADER) { - i += skip; - p += skip * OS_DATA_SIZE; - } - else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990) - new_frame = 3000-i; - else - new_frame += skip; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n", - name, new_frame+i, frame_seq_number+i); -#endif - osst_set_frame_position(STp, aSRpnt, new_frame + i, 0); - osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE); - osst_get_frame_position(STp, aSRpnt); - SRpnt = * aSRpnt; - - if (new_frame > frame + 1000) { - printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name); - vfree(buffer); - return (-EIO); - } - if ( i >= nframes + pending ) break; - flag = 0; - } - osst_copy_to_buffer(STp->buffer, p); - /* - * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type! - */ - osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i, - logical_blk_num + i*blks_per_frame, - ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame); - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG - "%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n", - name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame, - p[0], p[1], p[2], p[3]); -#endif - SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, - STp->timeout, MAX_RETRIES, 1); - - if (STp->buffer->syscall_result) - flag = 1; - else { - p += OS_DATA_SIZE; i++; - - /* if we just sent the last frame, wait till all successfully written */ - if ( i == nframes + pending ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name); -#endif - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_FILEMARKS; - cmd[1] = 1; - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - flag = STp->buffer->syscall_result; - while ( !flag && time_before(jiffies, startwait + 60*HZ) ) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, - MAX_RETRIES, 1); - - if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 && - (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) { - /* in the process of becoming ready */ - msleep(100); - continue; - } - if (STp->buffer->syscall_result) - flag = 1; - break; - } -#if DEBUG - debugging = dbg; - printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name); -#endif - } - } - *aSRpnt = SRpnt; - if (flag) { - if ((SRpnt->sense[ 2] & 0x0f) == 13 && - SRpnt->sense[12] == 0 && - SRpnt->sense[13] == 2) { - printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name); - vfree(buffer); - return (-EIO); /* hit end of tape = fail */ - } - i = ((SRpnt->sense[3] << 24) | - (SRpnt->sense[4] << 16) | - (SRpnt->sense[5] << 8) | - SRpnt->sense[6] ) - new_frame; - p = &buffer[i * OS_DATA_SIZE]; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i); -#endif - osst_get_frame_position(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n", - name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames); -#endif - } - } - if (flag) { - /* error recovery did not successfully complete */ - printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name, - STp->write_type == OS_WRITE_HEADER?"header":"body"); - } - if (!pending) - osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */ - vfree(buffer); - return 0; -} - -static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned int frame, unsigned int skip, int pending) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - char * name = tape_name(STp); - int expected = 0; - int attempts = 1000 / skip; - int flag = 1; - unsigned long startwait = jiffies; -#if DEBUG - int dbg = debugging; -#endif - - while (attempts && time_before(jiffies, startwait + 60*HZ)) { - if (flag) { -#if DEBUG - debugging = dbg; -#endif - if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990) - frame = 3000-skip; - expected = frame+skip+STp->cur_frames+pending; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n", - name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending); -#endif - osst_set_frame_position(STp, aSRpnt, frame + skip, 1); - flag = 0; - attempts--; - schedule_timeout_interruptible(msecs_to_jiffies(100)); - } - if (osst_get_frame_position(STp, aSRpnt) < 0) { /* additional write error */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n", - name, STp->first_frame_position, - STp->last_frame_position, STp->cur_frames); -#endif - frame = STp->last_frame_position; - flag = 1; - continue; - } - if (pending && STp->cur_frames < 50) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n", - name, STp->frame_seq_number-1, STp->first_frame_position); -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, - STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - - if (STp->buffer->syscall_result) { /* additional write error */ - if ((SRpnt->sense[ 2] & 0x0f) == 13 && - SRpnt->sense[12] == 0 && - SRpnt->sense[13] == 2) { - printk(KERN_ERR - "%s:E: Volume overflow in write error recovery\n", - name); - break; /* hit end of tape = fail */ - } - flag = 1; - } - else - pending = 0; - - continue; - } - if (STp->cur_frames == 0) { -#if DEBUG - debugging = dbg; - printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name); -#endif - if (STp->first_frame_position != expected) { - printk(KERN_ERR "%s:A: Actual position %d - expected %d\n", - name, STp->first_frame_position, expected); - return (-EIO); - } - return 0; - } -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name); - printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); - debugging = 0; - } -#endif - schedule_timeout_interruptible(msecs_to_jiffies(100)); - } - printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name); -#if DEBUG - debugging = dbg; -#endif - return (-EIO); -} - -/* - * Error recovery algorithm for the OnStream tape. - */ - -static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending) -{ - struct osst_request * SRpnt = * aSRpnt; - struct st_partstat * STps = & STp->ps[STp->partition]; - char * name = tape_name(STp); - int retval = 0; - int rw_state; - unsigned int frame, skip; - - rw_state = STps->rw; - - if ((SRpnt->sense[ 2] & 0x0f) != 3 - || SRpnt->sense[12] != 12 - || SRpnt->sense[13] != 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name, - SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]); -#endif - return (-EIO); - } - frame = (SRpnt->sense[3] << 24) | - (SRpnt->sense[4] << 16) | - (SRpnt->sense[5] << 8) | - SRpnt->sense[6]; - skip = SRpnt->sense[9]; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip); -#endif - osst_get_frame_position(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n", - name, STp->first_frame_position, STp->last_frame_position); -#endif - switch (STp->write_type) { - case OS_WRITE_DATA: - case OS_WRITE_EOD: - case OS_WRITE_NEW_MARK: - printk(KERN_WARNING - "%s:I: Relocating %d buffered logical frames from position %u to %u\n", - name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip); - if (STp->os_fw_rev >= 10600) - retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending); - else - retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending); - printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name, - retval?"E" :"I", - retval?"" :"Don't worry, ", - retval?" not ":" "); - break; - case OS_WRITE_LAST_MARK: - printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name); - osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); - retval = -EIO; - break; - case OS_WRITE_HEADER: - printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name); - retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending); - break; - default: - printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name); - osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); - } - osst_get_frame_position(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n", - name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position); - printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num); -#endif - if (retval == 0) { - STp->recover_count++; - STp->recover_erreg++; - } else - STp->abort_count++; - - STps->rw = rw_state; - return retval; -} - -static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt, - int mt_op, int mt_count) -{ - char * name = tape_name(STp); - int cnt; - int last_mark_ppos = -1; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count); -#endif - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name); -#endif - return -EIO; - } - if (STp->linux_media_version >= 4) { - /* - * direct lookup in header filemark list - */ - cnt = ntohl(STp->buffer->aux->filemark_cnt); - if (STp->header_ok && - STp->header_cache != NULL && - (cnt - mt_count) >= 0 && - (cnt - mt_count) < OS_FM_TAB_MAX && - (cnt - mt_count) < STp->filemark_cnt && - STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos) - - last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]); -#if DEBUG - if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX) - printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name, - STp->header_cache == NULL?"lack of header cache":"count out of range"); - else - printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", - name, cnt, - ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || - (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == - STp->buffer->aux->last_mark_ppos))?"match":"error", - mt_count, last_mark_ppos); -#endif - if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) { - osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Couldn't get logical blk num in space_filemarks\n", name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, last_mark_ppos); - return (-EIO); - } - goto found; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name); -#endif - } - cnt = 0; - while (cnt != mt_count) { - last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos); - if (last_mark_ppos == -1) - return (-EIO); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos); -#endif - osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); - cnt++; - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, last_mark_ppos); - return (-EIO); - } - } -found: - if (mt_op == MTBSFM) { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->buffer_bytes = 0; - STp->buffer->read_pointer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - } - return 0; -} - -/* - * ADRL 1.1 compatible "slow" space filemarks fwd version - * - * Just scans for the filemark sequentially. - */ -static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt, - int mt_op, int mt_count) -{ - int cnt = 0; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count); -#endif - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name); -#endif - return (-EIO); - } - while (1) { - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) - cnt++; - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name); -#endif - if (STp->first_frame_position > STp->eod_frame_ppos+1) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n", - name, STp->eod_frame_ppos, STp->first_frame_position-1); -#endif - STp->eod_frame_ppos = STp->first_frame_position-1; - } - return (-EIO); - } - if (cnt == mt_count) - break; - STp->frame_in_buffer = 0; - } - if (mt_op == MTFSF) { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->buffer_bytes = 0; - STp->buffer->read_pointer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - } - return 0; -} - -/* - * Fast linux specific version of OnStream FSF - */ -static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt, - int mt_op, int mt_count) -{ - char * name = tape_name(STp); - int cnt = 0, - next_mark_ppos = -1; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count); -#endif - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name); -#endif - return (-EIO); - } - - if (STp->linux_media_version >= 4) { - /* - * direct lookup in header filemark list - */ - cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1; - if (STp->header_ok && - STp->header_cache != NULL && - (cnt + mt_count) < OS_FM_TAB_MAX && - (cnt + mt_count) < STp->filemark_cnt && - ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || - (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos))) - - next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]); -#if DEBUG - if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX) - printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name, - STp->header_cache == NULL?"lack of header cache":"count out of range"); - else - printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", - name, cnt, - ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || - (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == - STp->buffer->aux->last_mark_ppos))?"match":"error", - mt_count, next_mark_ppos); -#endif - if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); -#endif - return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); - } else { - osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", - name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, next_mark_ppos); - return (-EIO); - } - if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) { - printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n", - name, cnt+mt_count, next_mark_ppos, - ntohl(STp->buffer->aux->filemark_cnt)); - return (-EIO); - } - } - } else { - /* - * Find nearest (usually previous) marker, then jump from marker to marker - */ - while (1) { - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) - break; - if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name); -#endif - return (-EIO); - } - if (ntohl(STp->buffer->aux->filemark_cnt) == 0) { - if (STp->first_mark_ppos == -1) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); -#endif - return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); - } - osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n", - name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n", - name, STp->first_mark_ppos); - return (-EIO); - } - } else { - if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0) - return (-EIO); - mt_count++; - } - } - cnt++; - while (cnt != mt_count) { - next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos); - if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); -#endif - return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt); - } -#if DEBUG - else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos); -#endif - osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); - cnt++; - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", - name); -#endif - return (-EIO); - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { - printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", - name, next_mark_ppos); - return (-EIO); - } - } - } - if (mt_op == MTFSF) { - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->buffer_bytes = 0; - STp->buffer->read_pointer = 0; - STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); - } - return 0; -} - -/* - * In debug mode, we want to see as many errors as possible - * to test the error recovery mechanism. - */ -#if DEBUG -static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = * aSRpnt; - char * name = tape_name(STp); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH; - - (STp->buffer)->b_data[0] = cmd[4] - 1; - (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */ - (STp->buffer)->b_data[2] = 0; /* Reserved */ - (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */ - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7); - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries; - - if (debugging) - printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries); - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result) - printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries); -} -#endif - - -static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int result; - int this_mark_ppos = STp->first_frame_position; - int this_mark_lbn = STp->logical_blk_num; -#if DEBUG - char * name = tape_name(STp); -#endif - - if (STp->raw) return 0; - - STp->write_type = OS_WRITE_NEW_MARK; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n", - name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn); -#endif - STp->dirty = 1; - result = osst_flush_write_buffer(STp, aSRpnt); - result |= osst_flush_drive_buffer(STp, aSRpnt); - STp->last_mark_ppos = this_mark_ppos; - STp->last_mark_lbn = this_mark_lbn; - if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX) - STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos); - if (STp->filemark_cnt++ == 0) - STp->first_mark_ppos = this_mark_ppos; - return result; -} - -static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int result; -#if DEBUG - char * name = tape_name(STp); -#endif - - if (STp->raw) return 0; - - STp->write_type = OS_WRITE_EOD; - STp->eod_frame_ppos = STp->first_frame_position; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name, - STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num); -#endif - STp->dirty = 1; - - result = osst_flush_write_buffer(STp, aSRpnt); - result |= osst_flush_drive_buffer(STp, aSRpnt); - STp->eod_frame_lfa = --(STp->frame_seq_number); - return result; -} - -static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count) -{ - char * name = tape_name(STp); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where); -#endif - osst_wait_ready(STp, aSRpnt, 60 * 5, 0); - osst_set_frame_position(STp, aSRpnt, where, 0); - STp->write_type = OS_WRITE_FILLER; - while (count--) { - memcpy(STp->buffer->b_data, "Filler", 6); - STp->buffer->buffer_bytes = 6; - STp->dirty = 1; - if (osst_flush_write_buffer(STp, aSRpnt)) { - printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name); - return (-EIO); - } - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name); -#endif - return osst_flush_drive_buffer(STp, aSRpnt); -} - -static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count) -{ - char * name = tape_name(STp); - int result; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where); -#endif - osst_wait_ready(STp, aSRpnt, 60 * 5, 0); - osst_set_frame_position(STp, aSRpnt, where, 0); - STp->write_type = OS_WRITE_HEADER; - while (count--) { - osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache); - STp->buffer->buffer_bytes = sizeof(os_header_t); - STp->dirty = 1; - if (osst_flush_write_buffer(STp, aSRpnt)) { - printk(KERN_INFO "%s:I: Couldn't write header frame\n", name); - return (-EIO); - } - } - result = osst_flush_drive_buffer(STp, aSRpnt); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done"); -#endif - return result; -} - -static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod) -{ - os_header_t * header; - int result; - char * name = tape_name(STp); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name); -#endif - if (STp->raw) return 0; - - if (STp->header_cache == NULL) { - if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { - printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); - return (-ENOMEM); - } - memset(STp->header_cache, 0, sizeof(os_header_t)); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name); -#endif - } - if (STp->header_ok) STp->update_frame_cntr++; - else STp->update_frame_cntr = 0; - - header = STp->header_cache; - strcpy(header->ident_str, "ADR_SEQ"); - header->major_rev = 1; - header->minor_rev = 4; - header->ext_trk_tb_off = htons(17192); - header->pt_par_num = 1; - header->partition[0].partition_num = OS_DATA_PARTITION; - header->partition[0].par_desc_ver = OS_PARTITION_VERSION; - header->partition[0].wrt_pass_cntr = htons(STp->wrt_pass_cntr); - header->partition[0].first_frame_ppos = htonl(STp->first_data_ppos); - header->partition[0].last_frame_ppos = htonl(STp->capacity); - header->partition[0].eod_frame_ppos = htonl(STp->eod_frame_ppos); - header->cfg_col_width = htonl(20); - header->dat_col_width = htonl(1500); - header->qfa_col_width = htonl(0); - header->ext_track_tb.nr_stream_part = 1; - header->ext_track_tb.et_ent_sz = 32; - header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0; - header->ext_track_tb.dat_ext_trk_ey.fmt = 1; - header->ext_track_tb.dat_ext_trk_ey.fm_tab_off = htons(17736); - header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0; - header->ext_track_tb.dat_ext_trk_ey.last_hlb = htonl(STp->eod_frame_lfa); - header->ext_track_tb.dat_ext_trk_ey.last_pp = htonl(STp->eod_frame_ppos); - header->dat_fm_tab.fm_part_num = 0; - header->dat_fm_tab.fm_tab_ent_sz = 4; - header->dat_fm_tab.fm_tab_ent_cnt = htons(STp->filemark_cnt<OS_FM_TAB_MAX? - STp->filemark_cnt:OS_FM_TAB_MAX); - - result = __osst_write_header(STp, aSRpnt, 0xbae, 5); - if (STp->update_frame_cntr == 0) - osst_write_filler(STp, aSRpnt, 0xbb3, 5); - result &= __osst_write_header(STp, aSRpnt, 5, 5); - - if (locate_eod) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos); -#endif - osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0); - } - if (result) - printk(KERN_ERR "%s:E: Write header failed\n", name); - else { - memcpy(STp->application_sig, "LIN4", 4); - STp->linux_media = 1; - STp->linux_media_version = 4; - STp->header_ok = 1; - } - return result; -} - -static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - if (STp->header_cache != NULL) - memset(STp->header_cache, 0, sizeof(os_header_t)); - - STp->logical_blk_num = STp->frame_seq_number = 0; - STp->frame_in_buffer = 0; - STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A; - STp->filemark_cnt = 0; - STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; - return osst_write_header(STp, aSRpnt, 1); -} - -static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos) -{ - char * name = tape_name(STp); - os_header_t * header; - os_aux_t * aux; - char id_string[8]; - int linux_media_version, - update_frame_cntr; - - if (STp->raw) - return 1; - - if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) { - if (osst_set_frame_position(STp, aSRpnt, ppos, 0)) - printk(KERN_WARNING "%s:W: Couldn't position tape\n", name); - osst_wait_ready(STp, aSRpnt, 60 * 15, 0); - if (osst_initiate_read (STp, aSRpnt)) { - printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name); - return 0; - } - } - if (osst_read_frame(STp, aSRpnt, 180)) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name); -#endif - return 0; - } - header = (os_header_t *) STp->buffer->b_data; /* warning: only first segment addressable */ - aux = STp->buffer->aux; - if (aux->frame_type != OS_FRAME_TYPE_HEADER) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos); -#endif - return 0; - } - if (ntohl(aux->frame_seq_num) != 0 || - ntohl(aux->logical_blk_num) != 0 || - aux->partition.partition_num != OS_CONFIG_PARTITION || - ntohl(aux->partition.first_frame_ppos) != 0 || - ntohl(aux->partition.last_frame_ppos) != 0xbb7 ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name, - ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), - aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos), - ntohl(aux->partition.last_frame_ppos)); -#endif - return 0; - } - if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 && - strncmp(header->ident_str, "ADR-SEQ", 7) != 0) { - strlcpy(id_string, header->ident_str, 8); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string); -#endif - return 0; - } - update_frame_cntr = ntohl(aux->update_frame_cntr); - if (update_frame_cntr < STp->update_frame_cntr) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n", - name, ppos, update_frame_cntr, STp->update_frame_cntr); -#endif - return 0; - } - if (header->major_rev != 1 || header->minor_rev != 4 ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n", - name, (header->major_rev != 1 || header->minor_rev < 2 || - header->minor_rev > 4 )? "Invalid" : "Warning:", - header->major_rev, header->minor_rev); -#endif - if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4) - return 0; - } -#if DEBUG - if (header->pt_par_num != 1) - printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n", - name, header->pt_par_num); -#endif - memcpy(id_string, aux->application_sig, 4); - id_string[4] = 0; - if (memcmp(id_string, "LIN", 3) == 0) { - STp->linux_media = 1; - linux_media_version = id_string[3] - '0'; - if (linux_media_version != 4) - printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n", - name, linux_media_version); - } else { - printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string); - return 0; - } - if (linux_media_version < STp->linux_media_version) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n", - name, ppos, linux_media_version); -#endif - return 0; - } - if (linux_media_version > STp->linux_media_version) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n", - name, ppos, linux_media_version); -#endif - memcpy(STp->application_sig, id_string, 5); - STp->linux_media_version = linux_media_version; - STp->update_frame_cntr = -1; - } - if (update_frame_cntr > STp->update_frame_cntr) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n", - name, ppos, update_frame_cntr); -#endif - if (STp->header_cache == NULL) { - if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { - printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); - return 0; - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name); -#endif - } - osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache); - header = STp->header_cache; /* further accesses from cached (full) copy */ - - STp->wrt_pass_cntr = ntohs(header->partition[0].wrt_pass_cntr); - STp->first_data_ppos = ntohl(header->partition[0].first_frame_ppos); - STp->eod_frame_ppos = ntohl(header->partition[0].eod_frame_ppos); - STp->eod_frame_lfa = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb); - STp->filemark_cnt = ntohl(aux->filemark_cnt); - STp->first_mark_ppos = ntohl(aux->next_mark_ppos); - STp->last_mark_ppos = ntohl(aux->last_mark_ppos); - STp->last_mark_lbn = ntohl(aux->last_mark_lbn); - STp->update_frame_cntr = update_frame_cntr; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n", - name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt); - printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name, - STp->first_data_ppos, - ntohl(header->partition[0].last_frame_ppos), - ntohl(header->partition[0].eod_frame_ppos)); - printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n", - name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos); -#endif - if (header->minor_rev < 4 && STp->linux_media_version == 4) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name); -#endif - memcpy((void *)header->dat_fm_tab.fm_tab_ent, - (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent)); - memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list)); - } - if (header->minor_rev == 4 && - (header->ext_trk_tb_off != htons(17192) || - header->partition[0].partition_num != OS_DATA_PARTITION || - header->partition[0].par_desc_ver != OS_PARTITION_VERSION || - header->partition[0].last_frame_ppos != htonl(STp->capacity) || - header->cfg_col_width != htonl(20) || - header->dat_col_width != htonl(1500) || - header->qfa_col_width != htonl(0) || - header->ext_track_tb.nr_stream_part != 1 || - header->ext_track_tb.et_ent_sz != 32 || - header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION || - header->ext_track_tb.dat_ext_trk_ey.fmt != 1 || - header->ext_track_tb.dat_ext_trk_ey.fm_tab_off != htons(17736) || - header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0 || - header->ext_track_tb.dat_ext_trk_ey.last_pp != htonl(STp->eod_frame_ppos) || - header->dat_fm_tab.fm_part_num != OS_DATA_PARTITION || - header->dat_fm_tab.fm_tab_ent_sz != 4 || - header->dat_fm_tab.fm_tab_ent_cnt != - htons(STp->filemark_cnt<OS_FM_TAB_MAX?STp->filemark_cnt:OS_FM_TAB_MAX))) - printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name); - - } - - return 1; -} - -static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int position, ppos; - int first, last; - int valid = 0; - char * name = tape_name(STp); - - position = osst_get_frame_position(STp, aSRpnt); - - if (STp->raw) { - STp->header_ok = STp->linux_media = 1; - STp->linux_media_version = 0; - return 1; - } - STp->header_ok = STp->linux_media = STp->linux_media_version = 0; - STp->wrt_pass_cntr = STp->update_frame_cntr = -1; - STp->eod_frame_ppos = STp->first_data_ppos = -1; - STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reading header\n", name); -#endif - - /* optimization for speed - if we are positioned at ppos 10, read second group first */ - /* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */ - - first = position==10?0xbae: 5; - last = position==10?0xbb3:10; - - for (ppos = first; ppos < last; ppos++) - if (__osst_analyze_headers(STp, aSRpnt, ppos)) - valid = 1; - - first = position==10? 5:0xbae; - last = position==10?10:0xbb3; - - for (ppos = first; ppos < last; ppos++) - if (__osst_analyze_headers(STp, aSRpnt, ppos)) - valid = 1; - - if (!valid) { - printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name); - STp->eod_frame_ppos = STp->first_data_ppos = 0; - osst_set_frame_position(STp, aSRpnt, 10, 0); - return 0; - } - if (position <= STp->first_data_ppos) { - position = STp->first_data_ppos; - STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; - } - osst_set_frame_position(STp, aSRpnt, position, 0); - STp->header_ok = 1; - - return 1; -} - -static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt) -{ - int frame_position = STp->first_frame_position; - int frame_seq_numbr = STp->frame_seq_number; - int logical_blk_num = STp->logical_blk_num; - int halfway_frame = STp->frame_in_buffer; - int read_pointer = STp->buffer->read_pointer; - int prev_mark_ppos = -1; - int actual_mark_ppos, i, n; -#if DEBUG - char * name = tape_name(STp); - - printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name); -#endif - osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); - if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name); -#endif - return (-EIO); - } - if (STp->linux_media_version >= 4) { - for (i=0; i<STp->filemark_cnt; i++) - if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position) - prev_mark_ppos = n; - } else - prev_mark_ppos = frame_position - 1; /* usually - we don't really know */ - actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ? - frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos); - if (frame_position != STp->first_frame_position || - frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) || - prev_mark_ppos != actual_mark_ppos ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name, - STp->first_frame_position, frame_position, - STp->frame_seq_number + (halfway_frame?0:1), - frame_seq_numbr, actual_mark_ppos, prev_mark_ppos); -#endif - return (-EIO); - } - if (halfway_frame) { - /* prepare buffer for append and rewrite on top of original */ - osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); - STp->buffer->buffer_bytes = read_pointer; - STp->ps[STp->partition].rw = ST_WRITING; - STp->dirty = 1; - } - STp->frame_in_buffer = halfway_frame; - STp->frame_seq_number = frame_seq_numbr; - STp->logical_blk_num = logical_blk_num; - return 0; -} - -/* Acc. to OnStream, the vers. numbering is the following: - * X.XX for released versions (X=digit), - * XXXY for unreleased versions (Y=letter) - * Ordering 1.05 < 106A < 106B < ... < 106a < ... < 1.06 - * This fn makes monoton numbers out of this scheme ... - */ -static unsigned int osst_parse_firmware_rev (const char * str) -{ - if (str[1] == '.') { - return (str[0]-'0')*10000 - +(str[2]-'0')*1000 - +(str[3]-'0')*100; - } else { - return (str[0]-'0')*10000 - +(str[1]-'0')*1000 - +(str[2]-'0')*100 - 100 - +(str[3]-'@'); - } -} - -/* - * Configure the OnStream SCII tape drive for default operation - */ -static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - char * name = tape_name(STp); - struct osst_request * SRpnt = * aSRpnt; - osst_mode_parameter_header_t * header; - osst_block_size_page_t * bs; - osst_capabilities_page_t * cp; - osst_tape_paramtr_page_t * prm; - int drive_buffer_size; - - if (STp->ready != ST_READY) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Not Ready\n", name); -#endif - return (-EIO); - } - - if (STp->os_fw_rev < 10600) { - printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev); - printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name); - } - - /* - * Configure 32.5KB (data+aux) frame size. - * Get the current frame size from the block size mode page - */ - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = BLOCK_SIZE_PAGE; - cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - if (SRpnt == NULL) { -#if DEBUG - printk(OSST_DEB_MSG "osst :D: Busy\n"); -#endif - return (-EBUSY); - } - *aSRpnt = SRpnt; - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name); - return (-EIO); - } - - header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; - bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl); - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n", name, bs->play32 ? "Yes" : "No"); - printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5 ? "Yes" : "No"); - printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n", name, bs->record32 ? "Yes" : "No"); - printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n", name, bs->record32_5 ? "Yes" : "No"); -#endif - - /* - * Configure default auto columns mode, 32.5KB transfer mode - */ - bs->one = 1; - bs->play32 = 0; - bs->play32_5 = 1; - bs->record32 = 0; - bs->record32_5 = 1; - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name); - return (-EIO); - } - -#if DEBUG - printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name); - /* - * In debug mode, we want to see as many errors as possible - * to test the error recovery mechanism. - */ - osst_set_retries(STp, aSRpnt, 0); - SRpnt = * aSRpnt; -#endif - - /* - * Set vendor name to 'LIN4' for "Linux support version 4". - */ - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; - - header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1; - header->medium_type = 0; /* Medium Type - ignoring */ - header->dsp = 0; /* Reserved */ - header->bdl = 0; /* Block Descriptor Length */ - - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7); - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4'; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name, - (char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2)); - return (-EIO); - } - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = CAPABILITIES_PAGE; - cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Can't get capabilities page\n", name); - return (-EIO); - } - - header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; - cp = (osst_capabilities_page_t *) ((STp->buffer)->b_data + - sizeof(osst_mode_parameter_header_t) + header->bdl); - - drive_buffer_size = ntohs(cp->buffer_size) / 2; - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = TAPE_PARAMTR_PAGE; - cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { - printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name); - return (-EIO); - } - - header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; - prm = (osst_tape_paramtr_page_t *) ((STp->buffer)->b_data + - sizeof(osst_mode_parameter_header_t) + header->bdl); - - STp->density = prm->density; - STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n", - name, STp->density, STp->capacity / 32, drive_buffer_size); -#endif - - return 0; - -} - - -/* Step over EOF if it has been inadvertently crossed (ioctl not used because - it messes up the block number). */ -static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward) -{ - int result; - char * name = tape_name(STp); - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n", - name, forward ? "forward" : "backward"); -#endif - - if (forward) { - /* assumes that the filemark is already read by the drive, so this is low cost */ - result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1); - } - else - /* assumes this is only called if we just read the filemark! */ - result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1); - - if (result < 0) - printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n", - name, forward ? "forward" : "backward"); - - return result; -} - - -/* Get the tape position. */ - -static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt) -{ - unsigned char scmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int result = 0; - char * name = tape_name(STp); - - /* KG: We want to be able to use it for checking Write Buffer availability - * and thus don't want to risk to overwrite anything. Exchange buffers ... */ - char mybuf[24]; - char * olddata = STp->buffer->b_data; - int oldsize = STp->buffer->buffer_size; - - if (STp->ready != ST_READY) return (-EIO); - - memset (scmd, 0, MAX_COMMAND_SIZE); - scmd[0] = READ_POSITION; - - STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; - SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); - if (!SRpnt) { - STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; - return (-EBUSY); - } - *aSRpnt = SRpnt; - - if (STp->buffer->syscall_result) - result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL; /* 3: Write Error */ - - if (result == -EINVAL) - printk(KERN_ERR "%s:E: Can't read tape position.\n", name); - else { - if (result == -EIO) { /* re-read position - this needs to preserve media errors */ - unsigned char mysense[16]; - memcpy (mysense, SRpnt->sense, 16); - memset (scmd, 0, MAX_COMMAND_SIZE); - scmd[0] = READ_POSITION; - STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; - SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE, - STp->timeout, MAX_RETRIES, 1); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n", - name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:", - SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]); -#endif - if (!STp->buffer->syscall_result) - memcpy (SRpnt->sense, mysense, 16); - else - printk(KERN_WARNING "%s:W: Double error in get position\n", name); - } - STp->first_frame_position = ((STp->buffer)->b_data[4] << 24) - + ((STp->buffer)->b_data[5] << 16) - + ((STp->buffer)->b_data[6] << 8) - + (STp->buffer)->b_data[7]; - STp->last_frame_position = ((STp->buffer)->b_data[ 8] << 24) - + ((STp->buffer)->b_data[ 9] << 16) - + ((STp->buffer)->b_data[10] << 8) - + (STp->buffer)->b_data[11]; - STp->cur_frames = (STp->buffer)->b_data[15]; -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name, - STp->first_frame_position, STp->last_frame_position, - ((STp->buffer)->b_data[0]&0x80)?" (BOP)": - ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"", - STp->cur_frames); - } -#endif - if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name, - STp->first_frame_position, STp->last_frame_position, STp->cur_frames); -#endif - STp->first_frame_position = STp->last_frame_position; - } - } - STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; - - return (result == 0 ? STp->first_frame_position : result); -} - - -/* Set the tape block */ -static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip) -{ - unsigned char scmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - struct st_partstat * STps; - int result = 0; - int pp = (ppos == 3000 && !skip)? 0 : ppos; - char * name = tape_name(STp); - - if (STp->ready != ST_READY) return (-EIO); - - STps = &(STp->ps[STp->partition]); - - if (ppos < 0 || ppos > STp->capacity) { - printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos); - pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1); - result = (-EINVAL); - } - - do { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp); -#endif - memset (scmd, 0, MAX_COMMAND_SIZE); - scmd[0] = SEEK_10; - scmd[1] = 1; - scmd[3] = (pp >> 24); - scmd[4] = (pp >> 16); - scmd[5] = (pp >> 8); - scmd[6] = pp; - if (skip) - scmd[9] = 0x80; - - SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout, - MAX_RETRIES, 1); - if (!SRpnt) - return (-EBUSY); - *aSRpnt = SRpnt; - - if ((STp->buffer)->syscall_result != 0) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n", - name, STp->first_frame_position, pp); -#endif - result = (-EIO); - } - if (pp != ppos) - osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE); - } while ((pp != ppos) && (pp = ppos)); - STp->first_frame_position = STp->last_frame_position = ppos; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->rw = ST_IDLE; - STp->frame_in_buffer = 0; - return result; -} - -static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT) -{ - struct st_partstat * STps = &(STp->ps[STp->partition]); - int result = 0; - - if (STp->write_type != OS_WRITE_NEW_MARK) { - /* true unless the user wrote the filemark for us */ - result = osst_flush_drive_buffer(STp, aSRpnt); - if (result < 0) goto out; - result = osst_write_filemark(STp, aSRpnt); - if (result < 0) goto out; - - if (STps->drv_file >= 0) - STps->drv_file++ ; - STps->drv_block = 0; - } - result = osst_write_eod(STp, aSRpnt); - osst_write_header(STp, aSRpnt, leave_at_EOT); - - STps->eof = ST_FM; -out: - return result; -} - -/* osst versions of st functions - augmented and stripped to suit OnStream only */ - -/* Flush the write buffer (never need to write if variable blocksize). */ -static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt) -{ - int offset, transfer, blks = 0; - int result = 0; - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = *aSRpnt; - struct st_partstat * STps; - char * name = tape_name(STp); - - if ((STp->buffer)->writing) { - if (SRpnt == (STp->buffer)->last_SRpnt) -#if DEBUG - { printk(OSST_DEB_MSG - "%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name); -#endif - *aSRpnt = SRpnt = NULL; -#if DEBUG - } else if (SRpnt) - printk(OSST_DEB_MSG - "%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name); -#endif - osst_write_behind_check(STp); - if ((STp->buffer)->syscall_result) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n", - name, (STp->buffer)->midlevel_result); -#endif - if ((STp->buffer)->midlevel_result == INT_MAX) - return (-ENOSPC); - return (-EIO); - } - } - - result = 0; - if (STp->dirty == 1) { - - STp->write_count++; - STps = &(STp->ps[STp->partition]); - STps->rw = ST_WRITING; - offset = STp->buffer->buffer_bytes; - blks = (offset + STp->block_size - 1) / STp->block_size; - transfer = OS_FRAME_SIZE; - - if (offset < OS_DATA_SIZE) - osst_zero_buffer_tail(STp->buffer); - - if (STp->poll) - if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120)) - result = osst_recover_wait_frame(STp, aSRpnt, 1); - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; - - switch (STp->write_type) { - case OS_WRITE_DATA: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", - name, blks, STp->frame_seq_number, - STp->logical_blk_num - blks, STp->logical_blk_num - 1); -#endif - osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, - STp->logical_blk_num - blks, STp->block_size, blks); - break; - case OS_WRITE_EOD: - osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++, - STp->logical_blk_num, 0, 0); - break; - case OS_WRITE_NEW_MARK: - osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++, - STp->logical_blk_num++, 0, blks=1); - break; - case OS_WRITE_HEADER: - osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0); - break; - default: /* probably FILLER */ - osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0); - } -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n", - name, offset, transfer, blks); -#endif - - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE, - STp->timeout, MAX_RETRIES, 1); - *aSRpnt = SRpnt; - if (!SRpnt) - return (-EBUSY); - - if ((STp->buffer)->syscall_result != 0) { -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n", - name, SRpnt->sense[0], SRpnt->sense[2], - SRpnt->sense[12], SRpnt->sense[13]); -#endif - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */ - (SRpnt->sense[2] & 0x0f) == NO_SENSE) { - STp->dirty = 0; - (STp->buffer)->buffer_bytes = 0; - result = (-ENOSPC); - } - else { - if (osst_write_error_recovery(STp, aSRpnt, 1)) { - printk(KERN_ERR "%s:E: Error on flush write.\n", name); - result = (-EIO); - } - } - STps->drv_block = (-1); /* FIXME - even if write recovery succeeds? */ - } - else { - STp->first_frame_position++; - STp->dirty = 0; - (STp->buffer)->buffer_bytes = 0; - } - } -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result); -#endif - return result; -} - - -/* Flush the tape buffer. The tape will be positioned correctly unless - seek_next is true. */ -static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next) -{ - struct st_partstat * STps; - int backspace = 0, result = 0; -#if DEBUG - char * name = tape_name(STp); -#endif - - /* - * If there was a bus reset, block further access - * to this device. - */ - if( STp->pos_unknown) - return (-EIO); - - if (STp->ready != ST_READY) - return 0; - - STps = &(STp->ps[STp->partition]); - if (STps->rw == ST_WRITING || STp->dirty) { /* Writing */ - STp->write_type = OS_WRITE_DATA; - return osst_flush_write_buffer(STp, aSRpnt); - } - if (STp->block_size == 0) - return 0; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name); -#endif - - if (!STp->can_bsr) { - backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size - - ((STp->buffer)->read_pointer + STp->block_size - 1 ) / STp->block_size ; - (STp->buffer)->buffer_bytes = 0; - (STp->buffer)->read_pointer = 0; - STp->frame_in_buffer = 0; /* FIXME is this relevant w. OSST? */ - } - - if (!seek_next) { - if (STps->eof == ST_FM_HIT) { - result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */ - if (!result) - STps->eof = ST_NOEOF; - else { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - } - } - if (!result && backspace > 0) /* TODO -- design and run a test case for this */ - result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace); - } - else if (STps->eof == ST_FM_HIT) { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - STps->eof = ST_NOEOF; - } - - return result; -} - -static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous) -{ - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt; - int blks; -#if DEBUG - char * name = tape_name(STp); -#endif - - if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name); -#endif - if (osst_flush_drive_buffer(STp, aSRpnt) < 0) { - return (-EIO); - } - /* error recovery may have bumped us past the header partition */ - if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name); -#endif - osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8); - } - } - - if (STp->poll) - if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120)) - if (osst_recover_wait_frame(STp, aSRpnt, 1)) - return (-EIO); - -// osst_build_stats(STp, &SRpnt); - - STp->ps[STp->partition].rw = ST_WRITING; - STp->write_type = OS_WRITE_DATA; - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = WRITE_6; - cmd[1] = 1; - cmd[4] = 1; /* one frame at a time... */ - blks = STp->buffer->buffer_bytes / STp->block_size; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks, - STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1); -#endif - osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, - STp->logical_blk_num - blks, STp->block_size, blks); - -#if DEBUG - if (!synchronous) - STp->write_pending = 1; -#endif - SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout, - MAX_RETRIES, synchronous); - if (!SRpnt) - return (-EBUSY); - *aSRpnt = SRpnt; - - if (synchronous) { - if (STp->buffer->syscall_result != 0) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Error on write:\n", name); -#endif - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x40)) { - if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW) - return (-ENOSPC); - } - else { - if (osst_write_error_recovery(STp, aSRpnt, 1)) - return (-EIO); - } - } - else - STp->first_frame_position++; - } - - STp->write_count++; - - return 0; -} - -/* Lock or unlock the drive door. Don't use when struct osst_request allocated. */ -static int do_door_lock(struct osst_tape * STp, int do_lock) -{ - int retval; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl"); -#endif - - retval = scsi_set_medium_removal(STp->device, - do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); - if (!retval) - STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED; - else - STp->door_locked = ST_LOCK_FAILS; - return retval; -} - -/* Set the internal state after reset */ -static void reset_state(struct osst_tape *STp) -{ - int i; - struct st_partstat *STps; - - STp->pos_unknown = 0; - for (i = 0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); - STps->rw = ST_IDLE; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = -1; - STps->drv_file = -1; - } -} - - -/* Entry points to osst */ - -/* Write command */ -static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos) -{ - ssize_t total, retval = 0; - ssize_t i, do_count, blks, transfer; - int write_threshold; - int doing_write = 0; - const char __user * b_point; - struct osst_request * SRpnt = NULL; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_tape * STp = filp->private_data; - char * name = tape_name(STp); - - - if (mutex_lock_interruptible(&STp->lock)) - return (-ERESTARTSYS); - - /* - * If we are in the middle of error recovery, don't let anyone - * else try and use this device. Also, if error recovery fails, it - * may try and take the device offline, in which case all further - * access to the device is prohibited. - */ - if( !scsi_block_when_processing_errors(STp->device) ) { - retval = (-ENXIO); - goto out; - } - - if (STp->ready != ST_READY) { - if (STp->ready == ST_NO_TAPE) - retval = (-ENOMEDIUM); - else - retval = (-EIO); - goto out; - } - STm = &(STp->modes[STp->current_mode]); - if (!STm->defined) { - retval = (-ENXIO); - goto out; - } - if (count == 0) - goto out; - - /* - * If there was a bus reset, block further access - * to this device. - */ - if (STp->pos_unknown) { - retval = (-EIO); - goto out; - } - -#if DEBUG - if (!STp->in_use) { - printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); - retval = (-EIO); - goto out; - } -#endif - - if (STp->write_prot) { - retval = (-EACCES); - goto out; - } - - /* Write must be integral number of blocks */ - if (STp->block_size != 0 && (count % STp->block_size) != 0) { - printk(KERN_ERR "%s:E: Write (%zd bytes) not multiple of tape block size (%d%c).\n", - name, count, STp->block_size<1024? - STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); - retval = (-EINVAL); - goto out; - } - - if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) { - printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n", - name, STp->first_frame_position); - retval = (-ENOSPC); - goto out; - } - - if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1)) - STp->door_locked = ST_LOCKED_AUTO; - - STps = &(STp->ps[STp->partition]); - - if (STps->rw == ST_READING) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name, - STps->drv_file, STps->drv_block); -#endif - retval = osst_flush_buffer(STp, &SRpnt, 0); - if (retval) - goto out; - STps->rw = ST_IDLE; - } - if (STps->rw != ST_WRITING) { - /* Are we totally rewriting this tape? */ - if (!STp->header_ok || - (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) || - (STps->drv_file == 0 && STps->drv_block == 0)) { - STp->wrt_pass_cntr++; -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n", - name, STp->wrt_pass_cntr); -#endif - osst_reset_header(STp, &SRpnt); - STps->drv_file = STps->drv_block = 0; - } - /* Do we know where we'll be writing on the tape? */ - else { - if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) || - STps->drv_file < 0 || STps->drv_block < 0) { - if (STp->first_frame_position == STp->eod_frame_ppos) { /* at EOD */ - STps->drv_file = STp->filemark_cnt; - STps->drv_block = 0; - } - else { - /* We have no idea where the tape is positioned - give up */ -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: Cannot write at indeterminate position.\n", name); -#endif - retval = (-EIO); - goto out; - } - } - if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) { - STp->filemark_cnt = STps->drv_file; - STp->last_mark_ppos = - ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]); - printk(KERN_WARNING - "%s:W: Overwriting file %d with old write pass counter %d\n", - name, STps->drv_file, STp->wrt_pass_cntr); - printk(KERN_WARNING - "%s:W: may lead to stale data being accepted on reading back!\n", - name); -#if DEBUG - printk(OSST_DEB_MSG - "%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n", - name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn); -#endif - } - } - STp->fast_open = 0; - } - if (!STp->header_ok) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name); -#endif - retval = (-EIO); - goto out; - } - - if ((STp->buffer)->writing) { -if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__); - osst_write_behind_check(STp); - if ((STp->buffer)->syscall_result) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name, - (STp->buffer)->midlevel_result); -#endif - if ((STp->buffer)->midlevel_result == INT_MAX) - STps->eof = ST_EOM_OK; - else - STps->eof = ST_EOM_ERROR; - } - } - if (STps->eof == ST_EOM_OK) { - retval = (-ENOSPC); - goto out; - } - else if (STps->eof == ST_EOM_ERROR) { - retval = (-EIO); - goto out; - } - - /* Check the buffer readability in cases where copy_user might catch - the problems after some tape movement. */ - if ((copy_from_user(&i, buf, 1) != 0 || - copy_from_user(&i, buf + count - 1, 1) != 0)) { - retval = (-EFAULT); - goto out; - } - - if (!STm->do_buffer_writes) { - write_threshold = 1; - } - else - write_threshold = (STp->buffer)->buffer_blocks * STp->block_size; - if (!STm->do_async_writes) - write_threshold--; - - total = count; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n", - name, (int) count, STps->drv_file, STps->drv_block, - STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position); -#endif - b_point = buf; - while ((STp->buffer)->buffer_bytes + count > write_threshold) - { - doing_write = 1; - do_count = (STp->buffer)->buffer_blocks * STp->block_size - - (STp->buffer)->buffer_bytes; - if (do_count > count) - do_count = count; - - i = append_to_buffer(b_point, STp->buffer, do_count); - if (i) { - retval = i; - goto out; - } - - blks = do_count / STp->block_size; - STp->logical_blk_num += blks; /* logical_blk_num is incremented as data is moved from user */ - - i = osst_write_frame(STp, &SRpnt, 1); - - if (i == (-ENOSPC)) { - transfer = STp->buffer->writing; /* FIXME -- check this logic */ - if (transfer <= do_count) { - *ppos += do_count - transfer; - count -= do_count - transfer; - if (STps->drv_block >= 0) { - STps->drv_block += (do_count - transfer) / STp->block_size; - } - STps->eof = ST_EOM_OK; - retval = (-ENOSPC); /* EOM within current request */ -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n", - name, (int) transfer); -#endif - } - else { - STps->eof = ST_EOM_ERROR; - STps->drv_block = (-1); /* Too cautious? */ - retval = (-EIO); /* EOM for old data */ -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name); -#endif - } - } - else - retval = i; - - if (retval < 0) { - if (SRpnt != NULL) { - osst_release_request(SRpnt); - SRpnt = NULL; - } - STp->buffer->buffer_bytes = 0; - STp->dirty = 0; - if (count < total) - retval = total - count; - goto out; - } - - *ppos += do_count; - b_point += do_count; - count -= do_count; - if (STps->drv_block >= 0) { - STps->drv_block += blks; - } - STp->buffer->buffer_bytes = 0; - STp->dirty = 0; - } /* end while write threshold exceeded */ - - if (count != 0) { - STp->dirty = 1; - i = append_to_buffer(b_point, STp->buffer, count); - if (i) { - retval = i; - goto out; - } - blks = count / STp->block_size; - STp->logical_blk_num += blks; - if (STps->drv_block >= 0) { - STps->drv_block += blks; - } - *ppos += count; - count = 0; - } - - if (doing_write && (STp->buffer)->syscall_result != 0) { - retval = (STp->buffer)->syscall_result; - goto out; - } - - if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) { - /* Schedule an asynchronous write */ - (STp->buffer)->writing = ((STp->buffer)->buffer_bytes / - STp->block_size) * STp->block_size; - STp->dirty = !((STp->buffer)->writing == - (STp->buffer)->buffer_bytes); - - i = osst_write_frame(STp, &SRpnt, 0); - if (i < 0) { - retval = (-EIO); - goto out; - } - SRpnt = NULL; /* Prevent releasing this request! */ - } - STps->at_sm &= (total == 0); - if (total > 0) - STps->eof = ST_NOEOF; - - retval = total; - -out: - if (SRpnt != NULL) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - - return retval; -} - - -/* Read command */ -static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos) -{ - ssize_t total, retval = 0; - ssize_t i, transfer; - int special; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_request * SRpnt = NULL; - struct osst_tape * STp = filp->private_data; - char * name = tape_name(STp); - - - if (mutex_lock_interruptible(&STp->lock)) - return (-ERESTARTSYS); - - /* - * If we are in the middle of error recovery, don't let anyone - * else try and use this device. Also, if error recovery fails, it - * may try and take the device offline, in which case all further - * access to the device is prohibited. - */ - if( !scsi_block_when_processing_errors(STp->device) ) { - retval = (-ENXIO); - goto out; - } - - if (STp->ready != ST_READY) { - if (STp->ready == ST_NO_TAPE) - retval = (-ENOMEDIUM); - else - retval = (-EIO); - goto out; - } - STm = &(STp->modes[STp->current_mode]); - if (!STm->defined) { - retval = (-ENXIO); - goto out; - } -#if DEBUG - if (!STp->in_use) { - printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); - retval = (-EIO); - goto out; - } -#endif - /* Must have initialized medium */ - if (!STp->header_ok) { - retval = (-EIO); - goto out; - } - - if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1)) - STp->door_locked = ST_LOCKED_AUTO; - - STps = &(STp->ps[STp->partition]); - if (STps->rw == ST_WRITING) { - retval = osst_flush_buffer(STp, &SRpnt, 0); - if (retval) - goto out; - STps->rw = ST_IDLE; - /* FIXME -- this may leave the tape without EOD and up2date headers */ - } - - if ((count % STp->block_size) != 0) { - printk(KERN_WARNING - "%s:W: Read (%zd bytes) not multiple of tape block size (%d%c).\n", name, count, - STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); - } - -#if DEBUG - if (debugging && STps->eof != ST_NOEOF) - printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name, - STps->eof, (STp->buffer)->buffer_bytes); -#endif - if ((STp->buffer)->buffer_bytes == 0 && - STps->eof >= ST_EOD_1) { - if (STps->eof < ST_EOD) { - STps->eof += 1; - retval = 0; - goto out; - } - retval = (-EIO); /* EOM or Blank Check */ - goto out; - } - - /* Check the buffer writability before any tape movement. Don't alter - buffer data. */ - if (copy_from_user(&i, buf, 1) != 0 || - copy_to_user (buf, &i, 1) != 0 || - copy_from_user(&i, buf + count - 1, 1) != 0 || - copy_to_user (buf + count - 1, &i, 1) != 0) { - retval = (-EFAULT); - goto out; - } - - /* Loop until enough data in buffer or a special condition found */ - for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) { - - /* Get new data if the buffer is empty */ - if ((STp->buffer)->buffer_bytes == 0) { - if (STps->eof == ST_FM_HIT) - break; - special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0); - if (special < 0) { /* No need to continue read */ - STp->frame_in_buffer = 0; - retval = special; - goto out; - } - } - - /* Move the data from driver buffer to user buffer */ - if ((STp->buffer)->buffer_bytes > 0) { -#if DEBUG - if (debugging && STps->eof != ST_NOEOF) - printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name, - STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total)); -#endif - /* force multiple of block size, note block_size may have been adjusted */ - transfer = (((STp->buffer)->buffer_bytes < count - total ? - (STp->buffer)->buffer_bytes : count - total)/ - STp->block_size) * STp->block_size; - - if (transfer == 0) { - printk(KERN_WARNING - "%s:W: Nothing can be transferred, requested %zd, tape block size (%d%c).\n", - name, count, STp->block_size < 1024? - STp->block_size:STp->block_size/1024, - STp->block_size<1024?'b':'k'); - break; - } - i = from_buffer(STp->buffer, buf, transfer); - if (i) { - retval = i; - goto out; - } - STp->logical_blk_num += transfer / STp->block_size; - STps->drv_block += transfer / STp->block_size; - *ppos += transfer; - buf += transfer; - total += transfer; - } - - if ((STp->buffer)->buffer_bytes == 0) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n", - name, STp->frame_seq_number); -#endif - STp->frame_in_buffer = 0; - STp->frame_seq_number++; /* frame to look for next time */ - } - } /* for (total = 0, special = 0; total < count && !special; ) */ - - /* Change the eof state if no data from tape or buffer */ - if (total == 0) { - if (STps->eof == ST_FM_HIT) { - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM; - STps->drv_block = 0; - if (STps->drv_file >= 0) - STps->drv_file++; - } - else if (STps->eof == ST_EOD_1) { - STps->eof = ST_EOD_2; - if (STps->drv_block > 0 && STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - } - else if (STps->eof == ST_EOD_2) - STps->eof = ST_EOD; - } - else if (STps->eof == ST_FM) - STps->eof = ST_NOEOF; - - retval = total; - -out: - if (SRpnt != NULL) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - - return retval; -} - - -/* Set the driver options */ -static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name) -{ - printk(KERN_INFO -"%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n", - name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes, - STm->do_read_ahead); - printk(KERN_INFO -"%s:I: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n", - name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock); - printk(KERN_INFO -"%s:I: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n", - name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, - STp->scsi2_logical); - printk(KERN_INFO -"%s:I: sysv: %d\n", name, STm->sysv); -#if DEBUG - printk(KERN_INFO - "%s:D: debugging: %d\n", - name, debugging); -#endif -} - - -static int osst_set_options(struct osst_tape *STp, long options) -{ - int value; - long code; - struct st_modedef * STm; - char * name = tape_name(STp); - - STm = &(STp->modes[STp->current_mode]); - if (!STm->defined) { - memcpy(STm, &(STp->modes[0]), sizeof(*STm)); - modes_defined = 1; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n", - name, STp->current_mode); -#endif - } - - code = options & MT_ST_OPTIONS; - if (code == MT_ST_BOOLEANS) { - STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0; - STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0; - STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0; - STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0; - STp->two_fm = (options & MT_ST_TWO_FM) != 0; - STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0; - STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0; - STp->can_bsr = (options & MT_ST_CAN_BSR) != 0; - STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0; - if ((STp->device)->scsi_level >= SCSI_2) - STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; - STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; - STm->sysv = (options & MT_ST_SYSV) != 0; -#if DEBUG - debugging = (options & MT_ST_DEBUGGING) != 0; -#endif - osst_log_options(STp, STm, name); - } - else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) { - value = (code == MT_ST_SETBOOLEANS); - if ((options & MT_ST_BUFFER_WRITES) != 0) - STm->do_buffer_writes = value; - if ((options & MT_ST_ASYNC_WRITES) != 0) - STm->do_async_writes = value; - if ((options & MT_ST_DEF_WRITES) != 0) - STm->defaults_for_writes = value; - if ((options & MT_ST_READ_AHEAD) != 0) - STm->do_read_ahead = value; - if ((options & MT_ST_TWO_FM) != 0) - STp->two_fm = value; - if ((options & MT_ST_FAST_MTEOM) != 0) - STp->fast_mteom = value; - if ((options & MT_ST_AUTO_LOCK) != 0) - STp->do_auto_lock = value; - if ((options & MT_ST_CAN_BSR) != 0) - STp->can_bsr = value; - if ((options & MT_ST_NO_BLKLIMS) != 0) - STp->omit_blklims = value; - if ((STp->device)->scsi_level >= SCSI_2 && - (options & MT_ST_CAN_PARTITIONS) != 0) - STp->can_partitions = value; - if ((options & MT_ST_SCSI2LOGICAL) != 0) - STp->scsi2_logical = value; - if ((options & MT_ST_SYSV) != 0) - STm->sysv = value; -#if DEBUG - if ((options & MT_ST_DEBUGGING) != 0) - debugging = value; -#endif - osst_log_options(STp, STm, name); - } - else if (code == MT_ST_WRITE_THRESHOLD) { - value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE; - if (value < 1 || value > osst_buffer_size) { - printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n", - name, value); - return (-EIO); - } - STp->write_threshold = value; - printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n", - name, value); - } - else if (code == MT_ST_DEF_BLKSIZE) { - value = (options & ~MT_ST_OPTIONS); - if (value == ~MT_ST_OPTIONS) { - STm->default_blksize = (-1); - printk(KERN_INFO "%s:I: Default block size disabled.\n", name); - } - else { - if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) { - printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n", - name, value); - return (-EINVAL); - } - STm->default_blksize = value; - printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n", - name, STm->default_blksize); - } - } - else if (code == MT_ST_TIMEOUTS) { - value = (options & ~MT_ST_OPTIONS); - if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) { - STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ; - printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name, - (value & ~MT_ST_SET_LONG_TIMEOUT)); - } - else { - STp->timeout = value * HZ; - printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value); - } - } - else if (code == MT_ST_DEF_OPTIONS) { - code = (options & ~MT_ST_CLEAR_DEFAULT); - value = (options & MT_ST_CLEAR_DEFAULT); - if (code == MT_ST_DEF_DENSITY) { - if (value == MT_ST_CLEAR_DEFAULT) { - STm->default_density = (-1); - printk(KERN_INFO "%s:I: Density default disabled.\n", name); - } - else { - STm->default_density = value & 0xff; - printk(KERN_INFO "%s:I: Density default set to %x\n", - name, STm->default_density); - } - } - else if (code == MT_ST_DEF_DRVBUFFER) { - if (value == MT_ST_CLEAR_DEFAULT) { - STp->default_drvbuffer = 0xff; - printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name); - } - else { - STp->default_drvbuffer = value & 7; - printk(KERN_INFO "%s:I: Drive buffer default set to %x\n", - name, STp->default_drvbuffer); - } - } - else if (code == MT_ST_DEF_COMPRESSION) { - if (value == MT_ST_CLEAR_DEFAULT) { - STm->default_compression = ST_DONT_TOUCH; - printk(KERN_INFO "%s:I: Compression default disabled.\n", name); - } - else { - STm->default_compression = (value & 1 ? ST_YES : ST_NO); - printk(KERN_INFO "%s:I: Compression default set to %x\n", - name, (value & 1)); - } - } - } - else - return (-EIO); - - return 0; -} - - -/* Internal ioctl function */ -static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt, - unsigned int cmd_in, unsigned long arg) -{ - int timeout; - long ltmp; - int i, ioctl_result; - int chg_eof = 1; - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = * aSRpnt; - struct st_partstat * STps; - int fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num; - int datalen = 0, direction = DMA_NONE; - char * name = tape_name(STp); - - if (STp->ready != ST_READY && cmd_in != MTLOAD) { - if (STp->ready == ST_NO_TAPE) - return (-ENOMEDIUM); - else - return (-EIO); - } - timeout = STp->long_timeout; - STps = &(STp->ps[STp->partition]); - fileno = STps->drv_file; - blkno = STps->drv_block; - at_sm = STps->at_sm; - frame_seq_numbr = STp->frame_seq_number; - logical_blk_num = STp->logical_blk_num; - - memset(cmd, 0, MAX_COMMAND_SIZE); - switch (cmd_in) { - case MTFSFM: - chg_eof = 0; /* Changed from the FSF after this */ - /* fall through */ - case MTFSF: - if (STp->raw) - return (-EIO); - if (STp->linux_media) - ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg); - else - ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg); - if (fileno >= 0) - fileno += arg; - blkno = 0; - at_sm &= (arg == 0); - goto os_bypass; - - case MTBSF: - chg_eof = 0; /* Changed from the FSF after this */ - /* fall through */ - case MTBSFM: - if (STp->raw) - return (-EIO); - ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg); - if (fileno >= 0) - fileno -= arg; - blkno = (-1); /* We can't know the block number */ - at_sm &= (arg == 0); - goto os_bypass; - - case MTFSR: - case MTBSR: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n", - name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num); -#endif - if (cmd_in == MTFSR) { - logical_blk_num += arg; - if (blkno >= 0) blkno += arg; - } - else { - logical_blk_num -= arg; - if (blkno >= 0) blkno -= arg; - } - ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num); - fileno = STps->drv_file; - blkno = STps->drv_block; - at_sm &= (arg == 0); - goto os_bypass; - - case MTFSS: - cmd[0] = SPACE; - cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */ - cmd[2] = (arg >> 16); - cmd[3] = (arg >> 8); - cmd[4] = arg; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name, - cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); -#endif - if (arg != 0) { - blkno = fileno = (-1); - at_sm = 1; - } - break; - case MTBSS: - cmd[0] = SPACE; - cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */ - ltmp = (-arg); - cmd[2] = (ltmp >> 16); - cmd[3] = (ltmp >> 8); - cmd[4] = ltmp; -#if DEBUG - if (debugging) { - if (cmd[2] & 0x80) - ltmp = 0xff000000; - ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4]; - printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n", - name, (-ltmp)); - } -#endif - if (arg != 0) { - blkno = fileno = (-1); - at_sm = 1; - } - break; - case MTWEOF: - if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) { - STp->write_type = OS_WRITE_DATA; - ioctl_result = osst_flush_write_buffer(STp, &SRpnt); - } else - ioctl_result = 0; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg); -#endif - for (i=0; i<arg; i++) - ioctl_result |= osst_write_filemark(STp, &SRpnt); - if (fileno >= 0) fileno += arg; - if (blkno >= 0) blkno = 0; - goto os_bypass; - - case MTWSM: - if (STp->write_prot) - return (-EACCES); - if (!STp->raw) - return 0; - cmd[0] = WRITE_FILEMARKS; /* FIXME -- need OS version */ - if (cmd_in == MTWSM) - cmd[1] = 2; - cmd[2] = (arg >> 16); - cmd[3] = (arg >> 8); - cmd[4] = arg; - timeout = STp->timeout; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name, - cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); -#endif - if (fileno >= 0) - fileno += arg; - blkno = 0; - at_sm = (cmd_in == MTWSM); - break; - case MTOFFL: - case MTLOAD: - case MTUNLOAD: - case MTRETEN: - cmd[0] = START_STOP; - cmd[1] = 1; /* Don't wait for completion */ - if (cmd_in == MTLOAD) { - if (STp->ready == ST_NO_TAPE) - cmd[4] = 4; /* open tray */ - else - cmd[4] = 1; /* load */ - } - if (cmd_in == MTRETEN) - cmd[4] = 3; /* retension then mount */ - if (cmd_in == MTOFFL) - cmd[4] = 4; /* rewind then eject */ - timeout = STp->timeout; -#if DEBUG - if (debugging) { - switch (cmd_in) { - case MTUNLOAD: - printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name); - break; - case MTLOAD: - printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name); - break; - case MTRETEN: - printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name); - break; - case MTOFFL: - printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name); - break; - } - } -#endif - fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; - break; - case MTNOP: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name); -#endif - return 0; /* Should do something ? */ - break; - case MTEOM: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name); -#endif - if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) || - (osst_get_logical_frame(STp, &SRpnt, -1, 0) < 0)) { - ioctl_result = -EIO; - goto os_bypass; - } - if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name); -#endif - ioctl_result = -EIO; - goto os_bypass; - } - ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0); - fileno = STp->filemark_cnt; - blkno = at_sm = 0; - goto os_bypass; - - case MTERASE: - if (STp->write_prot) - return (-EACCES); - ioctl_result = osst_reset_header(STp, &SRpnt); - i = osst_write_eod(STp, &SRpnt); - if (i < ioctl_result) ioctl_result = i; - i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos); - if (i < ioctl_result) ioctl_result = i; - fileno = blkno = at_sm = 0 ; - goto os_bypass; - - case MTREW: - cmd[0] = REZERO_UNIT; /* rewind */ - cmd[1] = 1; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]); -#endif - fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; - break; - - case MTSETBLK: /* Set block length */ - if ((STps->drv_block == 0 ) && - !STp->dirty && - ((STp->buffer)->buffer_bytes == 0) && - ((arg & MT_ST_BLKSIZE_MASK) >= 512 ) && - ((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) && - !(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK)) ) { - /* - * Only allowed to change the block size if you opened the - * device at the beginning of a file before writing anything. - * Note, that when reading, changing block_size is futile, - * as the size used when writing overrides it. - */ - STp->block_size = (arg & MT_ST_BLKSIZE_MASK); - printk(KERN_INFO "%s:I: Block size set to %d bytes.\n", - name, STp->block_size); - return 0; - } - /* fall through */ - case MTSETDENSITY: /* Set tape density */ - case MTSETDRVBUFFER: /* Set drive buffering */ - case SET_DENS_AND_BLK: /* Set density and block size */ - chg_eof = 0; - if (STp->dirty || (STp->buffer)->buffer_bytes != 0) - return (-EIO); /* Not allowed if data in buffer */ - if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) && - (arg & MT_ST_BLKSIZE_MASK) != 0 && - (arg & MT_ST_BLKSIZE_MASK) != STp->block_size ) { - printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n", - name, (int)(arg & MT_ST_BLKSIZE_MASK), - (OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now"); - return (-EINVAL); - } - return 0; /* FIXME silently ignore if block size didn't change */ - - default: - return (-ENOSYS); - } - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1); - - ioctl_result = (STp->buffer)->syscall_result; - - if (!SRpnt) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name); -#endif - return ioctl_result; - } - - if (!ioctl_result) { /* SCSI command successful */ - STp->frame_seq_number = frame_seq_numbr; - STp->logical_blk_num = logical_blk_num; - } - -os_bypass: -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result); -#endif - - if (!ioctl_result) { /* success */ - - if (cmd_in == MTFSFM) { - fileno--; - blkno--; - } - if (cmd_in == MTBSFM) { - fileno++; - blkno++; - } - STps->drv_block = blkno; - STps->drv_file = fileno; - STps->at_sm = at_sm; - - if (cmd_in == MTEOM) - STps->eof = ST_EOD; - else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) { - ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1); - STps->drv_block++; - STp->logical_blk_num++; - STp->frame_seq_number++; - STp->frame_in_buffer = 0; - STp->buffer->read_pointer = 0; - } - else if (cmd_in == MTFSF) - STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM; - else if (chg_eof) - STps->eof = ST_NOEOF; - - if (cmd_in == MTOFFL || cmd_in == MTUNLOAD) - STp->rew_at_close = 0; - else if (cmd_in == MTLOAD) { - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STp->ps[i].rw = ST_IDLE; - STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */ - } - STp->partition = 0; - } - - if (cmd_in == MTREW) { - ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); - if (ioctl_result > 0) - ioctl_result = 0; - } - - } else if (cmd_in == MTBSF || cmd_in == MTBSFM ) { - if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0) - STps->drv_file = STps->drv_block = -1; - else - STps->drv_file = STps->drv_block = 0; - STps->eof = ST_NOEOF; - } else if (cmd_in == MTFSF || cmd_in == MTFSFM) { - if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) - STps->drv_file = STps->drv_block = -1; - else { - STps->drv_file = STp->filemark_cnt; - STps->drv_block = 0; - } - STps->eof = ST_EOD; - } else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) { - STps->drv_file = STps->drv_block = (-1); - STps->eof = ST_NOEOF; - STp->header_ok = 0; - } else if (cmd_in == MTERASE) { - STp->header_ok = 0; - } else if (SRpnt) { /* SCSI command was not completely successful. */ - if (SRpnt->sense[2] & 0x40) { - STps->eof = ST_EOM_OK; - STps->drv_block = 0; - } - if (chg_eof) - STps->eof = ST_NOEOF; - - if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK) - STps->eof = ST_EOD; - - if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60)) - ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE); - } - *aSRpnt = SRpnt; - - return ioctl_result; -} - - -/* Open the device */ -static int __os_scsi_tape_open(struct inode * inode, struct file * filp) -{ - unsigned short flags; - int i, b_size, new_session = 0, retval = 0; - unsigned char cmd[MAX_COMMAND_SIZE]; - struct osst_request * SRpnt = NULL; - struct osst_tape * STp; - struct st_modedef * STm; - struct st_partstat * STps; - char * name; - int dev = TAPE_NR(inode); - int mode = TAPE_MODE(inode); - - /* - * We really want to do nonseekable_open(inode, filp); here, but some - * versions of tar incorrectly call lseek on tapes and bail out if that - * fails. So we disallow pread() and pwrite(), but permit lseeks. - */ - filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); - - write_lock(&os_scsi_tapes_lock); - if (dev >= osst_max_dev || os_scsi_tapes == NULL || - (STp = os_scsi_tapes[dev]) == NULL || !STp->device) { - write_unlock(&os_scsi_tapes_lock); - return (-ENXIO); - } - - name = tape_name(STp); - - if (STp->in_use) { - write_unlock(&os_scsi_tapes_lock); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name); -#endif - return (-EBUSY); - } - if (scsi_device_get(STp->device)) { - write_unlock(&os_scsi_tapes_lock); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name); -#endif - return (-ENXIO); - } - filp->private_data = STp; - STp->in_use = 1; - write_unlock(&os_scsi_tapes_lock); - STp->rew_at_close = TAPE_REWIND(inode); - - if( !scsi_block_when_processing_errors(STp->device) ) { - return -ENXIO; - } - - if (mode != STp->current_mode) { -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n", - name, STp->current_mode, mode); -#endif - new_session = 1; - STp->current_mode = mode; - } - STm = &(STp->modes[STp->current_mode]); - - flags = filp->f_flags; - STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY); - - STp->raw = TAPE_IS_RAW(inode); - if (STp->raw) - STp->header_ok = 0; - - /* Allocate data segments for this device's tape buffer */ - if (!enlarge_buffer(STp->buffer, STp->restr_dma)) { - printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name); - retval = (-EOVERFLOW); - goto err_out; - } - if (STp->buffer->buffer_size >= OS_FRAME_SIZE) { - for (i = 0, b_size = 0; - (i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE); - b_size += STp->buffer->sg[i++].length); - STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name, - STp->buffer->b_data, page_address(STp->buffer->sg[0].page)); - printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name, - STp->buffer->aux, i, page_address(STp->buffer->sg[i].page)); -#endif - } else { - STp->buffer->aux = NULL; /* this had better never happen! */ - printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE); - retval = (-EIO); - goto err_out; - } - STp->buffer->writing = 0; - STp->buffer->syscall_result = 0; - STp->dirty = 0; - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); - STps->rw = ST_IDLE; - } - STp->ready = ST_READY; -#if DEBUG - STp->nbr_waits = STp->nbr_finished = 0; -#endif - - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); - if (!SRpnt) { - retval = (STp->buffer)->syscall_result; /* FIXME - valid? */ - goto err_out; - } - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x0f) == NOT_READY && - SRpnt->sense[12] == 4 ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]); -#endif - if (filp->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto err_out; - } - if (SRpnt->sense[13] == 2) { /* initialize command required (LOAD) */ - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = START_STOP; - cmd[1] = 1; - cmd[4] = 1; - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); - } - osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0); - } - if ((SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */ -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name); -#endif - STp->header_ok = 0; - - for (i=0; i < 10; i++) { - - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); - if ((SRpnt->sense[0] & 0x70) != 0x70 || - (SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION) - break; - } - - STp->pos_unknown = 0; - STp->partition = STp->new_partition = 0; - if (STp->can_partitions) - STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); - STps->rw = ST_IDLE; /* FIXME - seems to be redundant... */ - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = 0; - STps->drv_file = 0 ; - } - new_session = 1; - STp->recover_count = 0; - STp->abort_count = 0; - } - /* - * if we have valid headers from before, and the drive/tape seem untouched, - * open without reconfiguring and re-reading the headers - */ - if (!STp->buffer->syscall_result && STp->header_ok && - !SRpnt->result && SRpnt->sense[0] == 0) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SENSE; - cmd[1] = 8; - cmd[2] = VENDOR_IDENT_PAGE; - cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); - - if (STp->buffer->syscall_result || - STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' || - STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' || - STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' || - STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4' ) { -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name, - STp->buffer->b_data[MODE_HEADER_LENGTH + 2], - STp->buffer->b_data[MODE_HEADER_LENGTH + 3], - STp->buffer->b_data[MODE_HEADER_LENGTH + 4], - STp->buffer->b_data[MODE_HEADER_LENGTH + 5]); -#endif - STp->header_ok = 0; - } - i = STp->first_frame_position; - if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) { - if (STp->door_locked == ST_UNLOCKED) { - if (do_door_lock(STp, 1)) - printk(KERN_INFO "%s:I: Can't lock drive door\n", name); - else - STp->door_locked = ST_LOCKED_AUTO; - } - if (!STp->frame_in_buffer) { - STp->block_size = (STm->default_blksize > 0) ? - STm->default_blksize : OS_DATA_SIZE; - STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; - } - STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size; - STp->fast_open = 1; - osst_release_request(SRpnt); - return 0; - } -#if DEBUG - if (i != STp->first_frame_position) - printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n", - name, i, STp->first_frame_position); -#endif - STp->header_ok = 0; - } - STp->fast_open = 0; - - if ((STp->buffer)->syscall_result != 0 && /* in all error conditions except no medium */ - (SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) { - - memset(cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = MODE_SELECT; - cmd[1] = 0x10; - cmd[4] = 4 + MODE_HEADER_LENGTH; - - (STp->buffer)->b_data[0] = cmd[4] - 1; - (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */ - (STp->buffer)->b_data[2] = 0; /* Reserved */ - (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */ - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2; - (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3; - -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name); -#endif - SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); - - STp->header_ok = 0; - - for (i=0; i < 10; i++) { - - memset (cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, - STp->timeout, MAX_RETRIES, 1); - if ((SRpnt->sense[0] & 0x70) != 0x70 || - (SRpnt->sense[2] & 0x0f) == NOT_READY) - break; - - if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { - int j; - - STp->pos_unknown = 0; - STp->partition = STp->new_partition = 0; - if (STp->can_partitions) - STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - for (j = 0; j < ST_NBR_PARTITIONS; j++) { - STps = &(STp->ps[j]); - STps->rw = ST_IDLE; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = 0; - STps->drv_file = 0 ; - } - new_session = 1; - } - } - } - - if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0)) /* FIXME - not allowed with NOBLOCK */ - printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name); - - if ((STp->buffer)->syscall_result != 0) { - if ((STp->device)->scsi_level >= SCSI_2 && - (SRpnt->sense[0] & 0x70) == 0x70 && - (SRpnt->sense[2] & 0x0f) == NOT_READY && - SRpnt->sense[12] == 0x3a) { /* Check ASC */ - STp->ready = ST_NO_TAPE; - } else - STp->ready = ST_NOT_READY; - osst_release_request(SRpnt); - SRpnt = NULL; - STp->density = 0; /* Clear the erroneous "residue" */ - STp->write_prot = 0; - STp->block_size = 0; - STp->ps[0].drv_file = STp->ps[0].drv_block = (-1); - STp->partition = STp->new_partition = 0; - STp->door_locked = ST_UNLOCKED; - return 0; - } - - osst_configure_onstream(STp, &SRpnt); - - STp->block_size = STp->raw ? OS_FRAME_SIZE : ( - (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE); - STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size; - STp->buffer->buffer_bytes = - STp->buffer->read_pointer = - STp->frame_in_buffer = 0; - -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n", - name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size, - (STp->buffer)->buffer_blocks); -#endif - - if (STp->drv_write_prot) { - STp->write_prot = 1; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Write protected\n", name); -#endif - if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) { - retval = (-EROFS); - goto err_out; - } - } - - if (new_session) { /* Change the drive parameters for the new mode */ -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: New Session\n", name); -#endif - STp->density_changed = STp->blksize_changed = 0; - STp->compression_changed = 0; - } - - /* - * properly position the tape and check the ADR headers - */ - if (STp->door_locked == ST_UNLOCKED) { - if (do_door_lock(STp, 1)) - printk(KERN_INFO "%s:I: Can't lock drive door\n", name); - else - STp->door_locked = ST_LOCKED_AUTO; - } - - osst_analyze_headers(STp, &SRpnt); - - osst_release_request(SRpnt); - SRpnt = NULL; - - return 0; - -err_out: - if (SRpnt != NULL) - osst_release_request(SRpnt); - normalize_buffer(STp->buffer); - STp->header_ok = 0; - STp->in_use = 0; - scsi_device_put(STp->device); - - return retval; -} - -/* BKL pushdown: spaghetti avoidance wrapper */ -static int os_scsi_tape_open(struct inode * inode, struct file * filp) -{ - int ret; - - mutex_lock(&osst_int_mutex); - ret = __os_scsi_tape_open(inode, filp); - mutex_unlock(&osst_int_mutex); - return ret; -} - - - -/* Flush the tape buffer before close */ -static int os_scsi_tape_flush(struct file * filp, fl_owner_t id) -{ - int result = 0, result2; - struct osst_tape * STp = filp->private_data; - struct st_modedef * STm = &(STp->modes[STp->current_mode]); - struct st_partstat * STps = &(STp->ps[STp->partition]); - struct osst_request * SRpnt = NULL; - char * name = tape_name(STp); - - if (file_count(filp) > 1) - return 0; - - if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) { - STp->write_type = OS_WRITE_DATA; - result = osst_flush_write_buffer(STp, &SRpnt); - if (result != 0 && result != (-ENOSPC)) - goto out; - } - if ( STps->rw >= ST_WRITING && !STp->pos_unknown) { - -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n", - name, (long)(filp->f_pos)); - printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n", - name, STp->nbr_waits, STp->nbr_finished); - } -#endif - result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close)); -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n", - name, 1+STp->two_fm); -#endif - } - else if (!STp->rew_at_close) { - STps = &(STp->ps[STp->partition]); - if (!STm->sysv || STps->rw != ST_READING) { - if (STp->can_bsr) - result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */ - else if (STps->eof == ST_FM_HIT) { - result = cross_eof(STp, &SRpnt, 0); - if (result) { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - STps->eof = ST_FM; - } - else - STps->eof = ST_NOEOF; - } - } - else if ((STps->eof == ST_NOEOF && - !(result = cross_eof(STp, &SRpnt, 1))) || - STps->eof == ST_FM_HIT) { - if (STps->drv_file >= 0) - STps->drv_file++; - STps->drv_block = 0; - STps->eof = ST_FM; - } - } - -out: - if (STp->rew_at_close) { - result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); - STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; - if (result == 0 && result2 < 0) - result = result2; - } - if (SRpnt) osst_release_request(SRpnt); - - if (STp->abort_count || STp->recover_count) { - printk(KERN_INFO "%s:I:", name); - if (STp->abort_count) - printk(" %d unrecovered errors", STp->abort_count); - if (STp->recover_count) - printk(" %d recovered errors", STp->recover_count); - if (STp->write_count) - printk(" in %d frames written", STp->write_count); - if (STp->read_count) - printk(" in %d frames read", STp->read_count); - printk("\n"); - STp->recover_count = 0; - STp->abort_count = 0; - } - STp->write_count = 0; - STp->read_count = 0; - - return result; -} - - -/* Close the device and release it */ -static int os_scsi_tape_close(struct inode * inode, struct file * filp) -{ - int result = 0; - struct osst_tape * STp = filp->private_data; - - if (STp->door_locked == ST_LOCKED_AUTO) - do_door_lock(STp, 0); - - if (STp->raw) - STp->header_ok = 0; - - normalize_buffer(STp->buffer); - write_lock(&os_scsi_tapes_lock); - STp->in_use = 0; - write_unlock(&os_scsi_tapes_lock); - - scsi_device_put(STp->device); - - return result; -} - - -/* The ioctl command */ -static long osst_ioctl(struct file * file, - unsigned int cmd_in, unsigned long arg) -{ - int i, cmd_nr, cmd_type, blk, retval = 0; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_request * SRpnt = NULL; - struct osst_tape * STp = file->private_data; - char * name = tape_name(STp); - void __user * p = (void __user *)arg; - - mutex_lock(&osst_int_mutex); - if (mutex_lock_interruptible(&STp->lock)) { - mutex_unlock(&osst_int_mutex); - return -ERESTARTSYS; - } - -#if DEBUG - if (debugging && !STp->in_use) { - printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); - retval = (-EIO); - goto out; - } -#endif - STm = &(STp->modes[STp->current_mode]); - STps = &(STp->ps[STp->partition]); - - /* - * If we are in the middle of error recovery, don't let anyone - * else try and use this device. Also, if error recovery fails, it - * may try and take the device offline, in which case all further - * access to the device is prohibited. - */ - retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in, - file->f_flags & O_NDELAY); - if (retval) - goto out; - - cmd_type = _IOC_TYPE(cmd_in); - cmd_nr = _IOC_NR(cmd_in); -#if DEBUG - printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name, - cmd_type, cmd_nr, STp->raw?"raw":"normal"); -#endif - if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) { - struct mtop mtc; - int auto_weof = 0; - - if (_IOC_SIZE(cmd_in) != sizeof(mtc)) { - retval = (-EINVAL); - goto out; - } - - i = copy_from_user((char *) &mtc, p, sizeof(struct mtop)); - if (i) { - retval = (-EFAULT); - goto out; - } - - if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) { - printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name); - retval = (-EPERM); - goto out; - } - - if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) { - retval = (-ENXIO); - goto out; - } - - if (!STp->pos_unknown) { - - if (STps->eof == ST_FM_HIT) { - if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) { - mtc.mt_count -= 1; - if (STps->drv_file >= 0) - STps->drv_file += 1; - } - else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) { - mtc.mt_count += 1; - if (STps->drv_file >= 0) - STps->drv_file += 1; - } - } - - if (mtc.mt_op == MTSEEK) { - /* Old position must be restored if partition will be changed */ - i = !STp->can_partitions || (STp->new_partition != STp->partition); - } - else { - i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL || - mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM || - mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD || - mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM || - mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM || - mtc.mt_op == MTCOMPRESSION; - } - i = osst_flush_buffer(STp, &SRpnt, i); - if (i < 0) { - retval = i; - goto out; - } - } - else { - /* - * If there was a bus reset, block further access - * to this device. If the user wants to rewind the tape, - * then reset the flag and allow access again. - */ - if(mtc.mt_op != MTREW && - mtc.mt_op != MTOFFL && - mtc.mt_op != MTRETEN && - mtc.mt_op != MTERASE && - mtc.mt_op != MTSEEK && - mtc.mt_op != MTEOM) { - retval = (-EIO); - goto out; - } - reset_state(STp); - /* remove this when the midlevel properly clears was_reset */ - STp->device->was_reset = 0; - } - - if (mtc.mt_op != MTCOMPRESSION && mtc.mt_op != MTLOCK && - mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK && - mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTSETDRVBUFFER && - mtc.mt_op != MTMKPART && mtc.mt_op != MTSETPART && - mtc.mt_op != MTWEOF && mtc.mt_op != MTWSM ) { - - /* - * The user tells us to move to another position on the tape. - * If we were appending to the tape content, that would leave - * the tape without proper end, in that case write EOD and - * update the header to reflect its position. - */ -#if DEBUG - printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name, - STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle", - STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number, - STp->logical_blk_num, STps->drv_file, STps->drv_block ); -#endif - if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) { - auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) && - !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL)); - i = osst_write_trailer(STp, &SRpnt, - !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL)); -#if DEBUG - printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", - name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos, - STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block ); -#endif - if (i < 0) { - retval = i; - goto out; - } - } - STps->rw = ST_IDLE; - } - - if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED) - do_door_lock(STp, 0); /* Ignore result! */ - - if (mtc.mt_op == MTSETDRVBUFFER && - (mtc.mt_count & MT_ST_OPTIONS) != 0) { - retval = osst_set_options(STp, mtc.mt_count); - goto out; - } - - if (mtc.mt_op == MTSETPART) { - if (mtc.mt_count >= STp->nbr_partitions) - retval = -EINVAL; - else { - STp->new_partition = mtc.mt_count; - retval = 0; - } - goto out; - } - - if (mtc.mt_op == MTMKPART) { - if (!STp->can_partitions) { - retval = (-EINVAL); - goto out; - } - if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*|| - (i = partition_tape(inode, mtc.mt_count)) < 0*/) { - retval = i; - goto out; - } - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STp->ps[i].rw = ST_IDLE; - STp->ps[i].at_sm = 0; - STp->ps[i].last_block_valid = 0; - } - STp->partition = STp->new_partition = 0; - STp->nbr_partitions = 1; /* Bad guess ?-) */ - STps->drv_block = STps->drv_file = 0; - retval = 0; - goto out; - } - - if (mtc.mt_op == MTSEEK) { - if (STp->raw) - i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0); - else - i = osst_seek_sector(STp, &SRpnt, mtc.mt_count); - if (!STp->can_partitions) - STp->ps[0].rw = ST_IDLE; - retval = i; - goto out; - } - - if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) { - retval = do_door_lock(STp, (mtc.mt_op == MTLOCK)); - goto out; - } - - if (auto_weof) - cross_eof(STp, &SRpnt, 0); - - if (mtc.mt_op == MTCOMPRESSION) - retval = -EINVAL; /* OnStream drives don't have compression hardware */ - else - /* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS - * MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */ - retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count); - goto out; - } - - if (!STm->defined) { - retval = (-ENXIO); - goto out; - } - - if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) { - retval = i; - goto out; - } - - if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) { - struct mtget mt_status; - - if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) { - retval = (-EINVAL); - goto out; - } - - mt_status.mt_type = MT_ISONSTREAM_SC; - mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT; - mt_status.mt_dsreg = - ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) | - ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK); - mt_status.mt_blkno = STps->drv_block; - mt_status.mt_fileno = STps->drv_file; - if (STp->block_size != 0) { - if (STps->rw == ST_WRITING) - mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size; - else if (STps->rw == ST_READING) - mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes + - STp->block_size - 1) / STp->block_size; - } - - mt_status.mt_gstat = 0; - if (STp->drv_write_prot) - mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff); - if (mt_status.mt_blkno == 0) { - if (mt_status.mt_fileno == 0) - mt_status.mt_gstat |= GMT_BOT(0xffffffff); - else - mt_status.mt_gstat |= GMT_EOF(0xffffffff); - } - mt_status.mt_resid = STp->partition; - if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR) - mt_status.mt_gstat |= GMT_EOT(0xffffffff); - else if (STps->eof >= ST_EOM_OK) - mt_status.mt_gstat |= GMT_EOD(0xffffffff); - if (STp->density == 1) - mt_status.mt_gstat |= GMT_D_800(0xffffffff); - else if (STp->density == 2) - mt_status.mt_gstat |= GMT_D_1600(0xffffffff); - else if (STp->density == 3) - mt_status.mt_gstat |= GMT_D_6250(0xffffffff); - if (STp->ready == ST_READY) - mt_status.mt_gstat |= GMT_ONLINE(0xffffffff); - if (STp->ready == ST_NO_TAPE) - mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff); - if (STps->at_sm) - mt_status.mt_gstat |= GMT_SM(0xffffffff); - if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) || - STp->drv_buffer != 0) - mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff); - - i = copy_to_user(p, &mt_status, sizeof(struct mtget)); - if (i) { - retval = (-EFAULT); - goto out; - } - - STp->recover_erreg = 0; /* Clear after read */ - retval = 0; - goto out; - } /* End of MTIOCGET */ - - if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) { - struct mtpos mt_pos; - - if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) { - retval = (-EINVAL); - goto out; - } - if (STp->raw) - blk = osst_get_frame_position(STp, &SRpnt); - else - blk = osst_get_sector(STp, &SRpnt); - if (blk < 0) { - retval = blk; - goto out; - } - mt_pos.mt_blkno = blk; - i = copy_to_user(p, &mt_pos, sizeof(struct mtpos)); - if (i) - retval = -EFAULT; - goto out; - } - if (SRpnt) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - - retval = scsi_ioctl(STp->device, cmd_in, p); - mutex_unlock(&osst_int_mutex); - return retval; - -out: - if (SRpnt) osst_release_request(SRpnt); - - mutex_unlock(&STp->lock); - mutex_unlock(&osst_int_mutex); - - return retval; -} - -#ifdef CONFIG_COMPAT -static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg) -{ - struct osst_tape *STp = file->private_data; - struct scsi_device *sdev = STp->device; - int ret = -ENOIOCTLCMD; - if (sdev->host->hostt->compat_ioctl) { - - ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg); - - } - return ret; -} -#endif - - - -/* Memory handling routines */ - -/* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */ -static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg ) -{ - int i; - gfp_t priority; - struct osst_buffer *tb; - - if (from_initialization) - priority = GFP_ATOMIC; - else - priority = GFP_KERNEL; - - i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist); - tb = kzalloc(i, priority); - if (!tb) { - printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n"); - return NULL; - } - - tb->sg_segs = tb->orig_sg_segs = 0; - tb->use_sg = max_sg; - tb->in_use = 1; - tb->dma = need_dma; - tb->buffer_size = 0; -#if DEBUG - if (debugging) - printk(OSST_DEB_MSG - "osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n", - i, max_sg, need_dma); -#endif - return tb; -} - -/* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */ -static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) -{ - int segs, nbr, max_segs, b_size, order, got; - gfp_t priority; - - if (STbuffer->buffer_size >= OS_FRAME_SIZE) - return 1; - - if (STbuffer->sg_segs) { - printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n"); - normalize_buffer(STbuffer); - } - /* See how many segments we can use -- need at least two */ - nbr = max_segs = STbuffer->use_sg; - if (nbr <= 2) - return 0; - - priority = GFP_KERNEL /* | __GFP_NOWARN */; - if (need_dma) - priority |= GFP_DMA; - - /* Try to allocate the first segment up to OS_DATA_SIZE and the others - big enough to reach the goal (code assumes no segments in place) */ - for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) { - struct page *page = alloc_pages(priority, order); - - STbuffer->sg[0].offset = 0; - if (page != NULL) { - sg_set_page(&STbuffer->sg[0], page, b_size, 0); - STbuffer->b_data = page_address(page); - break; - } - } - if (sg_page(&STbuffer->sg[0]) == NULL) { - printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n"); - return 0; - } - /* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */ - for (segs=STbuffer->sg_segs=1, got=b_size; - segs < max_segs && got < OS_FRAME_SIZE; ) { - struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order); - STbuffer->sg[segs].offset = 0; - if (page == NULL) { - printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n", - OS_FRAME_SIZE); -#if DEBUG - STbuffer->buffer_size = got; -#endif - normalize_buffer(STbuffer); - return 0; - } - sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0); - got += STbuffer->sg[segs].length; - STbuffer->buffer_size = got; - STbuffer->sg_segs = ++segs; - } -#if DEBUG - if (debugging) { - printk(OSST_DEB_MSG - "osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n", - got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data); - printk(OSST_DEB_MSG - "osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n", - STbuffer->sg[0].length, page_address(STbuffer->sg[0].page), - STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page)); - } -#endif - - return 1; -} - - -/* Release the segments */ -static void normalize_buffer(struct osst_buffer *STbuffer) -{ - int i, order, b_size; - - for (i=0; i < STbuffer->sg_segs; i++) { - - for (b_size = PAGE_SIZE, order = 0; - b_size < STbuffer->sg[i].length; - b_size *= 2, order++); - - __free_pages(sg_page(&STbuffer->sg[i]), order); - STbuffer->buffer_size -= STbuffer->sg[i].length; - } -#if DEBUG - if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs) - printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n", - STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs); -#endif - STbuffer->sg_segs = STbuffer->orig_sg_segs = 0; -} - - -/* Move data from the user buffer to the tape buffer. Returns zero (success) or - negative error code. */ -static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count) -{ - int i, cnt, res, offset; - - for (i=0, offset=st_bp->buffer_bytes; - i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) - offset -= st_bp->sg[i].length; - if (i == st_bp->sg_segs) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n"); - return (-EIO); - } - for ( ; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length - offset < do_count ? - st_bp->sg[i].length - offset : do_count; - res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt); - if (res) - return (-EFAULT); - do_count -= cnt; - st_bp->buffer_bytes += cnt; - ubp += cnt; - offset = 0; - } - if (do_count) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n", - do_count); - return (-EIO); - } - return 0; -} - - -/* Move data from the tape buffer to the user buffer. Returns zero (success) or - negative error code. */ -static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count) -{ - int i, cnt, res, offset; - - for (i=0, offset=st_bp->read_pointer; - i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) - offset -= st_bp->sg[i].length; - if (i == st_bp->sg_segs) { /* Should never happen */ - printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n"); - return (-EIO); - } - for ( ; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length - offset < do_count ? - st_bp->sg[i].length - offset : do_count; - res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt); - if (res) - return (-EFAULT); - do_count -= cnt; - st_bp->buffer_bytes -= cnt; - st_bp->read_pointer += cnt; - ubp += cnt; - offset = 0; - } - if (do_count) { /* Should never happen */ - printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count); - return (-EIO); - } - return 0; -} - -/* Sets the tail of the buffer after fill point to zero. - Returns zero (success) or negative error code. */ -static int osst_zero_buffer_tail(struct osst_buffer *st_bp) -{ - int i, offset, do_count, cnt; - - for (i = 0, offset = st_bp->buffer_bytes; - i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) - offset -= st_bp->sg[i].length; - if (i == st_bp->sg_segs) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n"); - return (-EIO); - } - for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes; - i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length - offset < do_count ? - st_bp->sg[i].length - offset : do_count ; - memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt); - do_count -= cnt; - offset = 0; - } - if (do_count) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count); - return (-EIO); - } - return 0; -} - -/* Copy a osst 32K chunk of memory into the buffer. - Returns zero (success) or negative error code. */ -static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr) -{ - int i, cnt, do_count = OS_DATA_SIZE; - - for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length < do_count ? - st_bp->sg[i].length : do_count ; - memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt); - do_count -= cnt; - ptr += cnt; - } - if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n", - do_count, i); - return (-EIO); - } - return 0; -} - -/* Copy a osst 32K chunk of memory from the buffer. - Returns zero (success) or negative error code. */ -static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr) -{ - int i, cnt, do_count = OS_DATA_SIZE; - - for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { - cnt = st_bp->sg[i].length < do_count ? - st_bp->sg[i].length : do_count ; - memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt); - do_count -= cnt; - ptr += cnt; - } - if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */ - printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n", - do_count, i); - return (-EIO); - } - return 0; -} - - -/* Module housekeeping */ - -static void validate_options (void) -{ - if (max_dev > 0) - osst_max_dev = max_dev; - if (write_threshold_kbs > 0) - osst_write_threshold = write_threshold_kbs * ST_KILOBYTE; - if (osst_write_threshold > osst_buffer_size) - osst_write_threshold = osst_buffer_size; - if (max_sg_segs >= OSST_FIRST_SG) - osst_max_sg_segs = max_sg_segs; -#if DEBUG - printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n", - osst_max_dev, osst_write_threshold, osst_max_sg_segs); -#endif -} - -#ifndef MODULE -/* Set the boot options. Syntax: osst=xxx,yyy,... - where xxx is write threshold in 1024 byte blocks, - and yyy is number of s/g segments to use. */ -static int __init osst_setup (char *str) -{ - int i, ints[5]; - char *stp; - - stp = get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) { - for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++) - *parms[i].val = ints[i + 1]; - } else { - while (stp != NULL) { - for (i = 0; i < ARRAY_SIZE(parms); i++) { - int len = strlen(parms[i].name); - if (!strncmp(stp, parms[i].name, len) && - (*(stp + len) == ':' || *(stp + len) == '=')) { - *parms[i].val = - simple_strtoul(stp + len + 1, NULL, 0); - break; - } - } - if (i >= ARRAY_SIZE(parms)) - printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n", - stp); - stp = strchr(stp, ','); - if (stp) - stp++; - } - } - - return 1; -} - -__setup("osst=", osst_setup); - -#endif - -static const struct file_operations osst_fops = { - .owner = THIS_MODULE, - .read = osst_read, - .write = osst_write, - .unlocked_ioctl = osst_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = osst_compat_ioctl, -#endif - .open = os_scsi_tape_open, - .flush = os_scsi_tape_flush, - .release = os_scsi_tape_close, - .llseek = noop_llseek, -}; - -static int osst_supports(struct scsi_device * SDp) -{ - struct osst_support_data { - char *vendor; - char *model; - char *rev; - char *driver_hint; /* Name of the correct driver, NULL if unknown */ - }; - -static struct osst_support_data support_list[] = { - /* {"XXX", "Yy-", "", NULL}, example */ - SIGS_FROM_OSST, - {NULL, }}; - - struct osst_support_data *rp; - - /* We are willing to drive OnStream SC-x0 as well as the - * * IDE, ParPort, FireWire, USB variants, if accessible by - * * emulation layer (ide-scsi, usb-storage, ...) */ - - for (rp=&(support_list[0]); rp->vendor != NULL; rp++) - if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) && - !strncmp(rp->model, SDp->model, strlen(rp->model)) && - !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) - return 1; - return 0; -} - -/* - * sysfs support for osst driver parameter information - */ - -static ssize_t version_show(struct device_driver *ddd, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%s\n", osst_version); -} - -static DRIVER_ATTR_RO(version); - -static int osst_create_sysfs_files(struct device_driver *sysfs) -{ - return driver_create_file(sysfs, &driver_attr_version); -} - -static void osst_remove_sysfs_files(struct device_driver *sysfs) -{ - driver_remove_file(sysfs, &driver_attr_version); -} - -/* - * sysfs support for accessing ADR header information - */ - -static ssize_t osst_adr_rev_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev); - return l; -} - -DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL); - -static ssize_t osst_linux_media_version_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version); - return l; -} - -DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL); - -static ssize_t osst_capacity_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity); - return l; -} - -DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL); - -static ssize_t osst_first_data_ppos_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos); - return l; -} - -DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL); - -static ssize_t osst_eod_frame_ppos_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos); - return l; -} - -DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL); - -static ssize_t osst_filemark_cnt_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); - ssize_t l = 0; - - if (STp && STp->header_ok && STp->linux_media) - l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt); - return l; -} - -DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL); - -static struct class *osst_sysfs_class; - -static int osst_sysfs_init(void) -{ - osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape"); - if (IS_ERR(osst_sysfs_class)) { - printk(KERN_ERR "osst :W: Unable to register sysfs class\n"); - return PTR_ERR(osst_sysfs_class); - } - - return 0; -} - -static void osst_sysfs_destroy(dev_t dev) -{ - device_destroy(osst_sysfs_class, dev); -} - -static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name) -{ - struct device *osst_member; - int err; - - osst_member = device_create(osst_sysfs_class, device, dev, STp, - "%s", name); - if (IS_ERR(osst_member)) { - printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name); - return PTR_ERR(osst_member); - } - - err = device_create_file(osst_member, &dev_attr_ADR_rev); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_media_version); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_capacity); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_BOT_frame); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_EOD_frame); - if (err) - goto err_out; - err = device_create_file(osst_member, &dev_attr_file_count); - if (err) - goto err_out; - - return 0; - -err_out: - osst_sysfs_destroy(dev); - return err; -} - -static void osst_sysfs_cleanup(void) -{ - class_destroy(osst_sysfs_class); -} - -/* - * osst startup / cleanup code - */ - -static int osst_probe(struct device *dev) -{ - struct scsi_device * SDp = to_scsi_device(dev); - struct osst_tape * tpnt; - struct st_modedef * STm; - struct st_partstat * STps; - struct osst_buffer * buffer; - struct gendisk * drive; - int i, dev_num, err = -ENODEV; - - if (SDp->type != TYPE_TAPE || !osst_supports(SDp)) - return -ENODEV; - - drive = alloc_disk(1); - if (!drive) { - printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n"); - return -ENODEV; - } - - /* if this is the first attach, build the infrastructure */ - write_lock(&os_scsi_tapes_lock); - if (os_scsi_tapes == NULL) { - os_scsi_tapes = kmalloc_array(osst_max_dev, - sizeof(struct osst_tape *), - GFP_ATOMIC); - if (os_scsi_tapes == NULL) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n"); - goto out_put_disk; - } - for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL; - } - - if (osst_nr_dev >= osst_max_dev) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev); - goto out_put_disk; - } - - /* find a free minor number */ - for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++) - ; - if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)"); - dev_num = i; - - /* allocate a struct osst_tape for this device */ - tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC); - if (!tpnt) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n"); - goto out_put_disk; - } - - /* allocate a buffer for this device */ - i = SDp->host->sg_tablesize; - if (osst_max_sg_segs < i) - i = osst_max_sg_segs; - buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i); - if (buffer == NULL) { - write_unlock(&os_scsi_tapes_lock); - printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n"); - kfree(tpnt); - goto out_put_disk; - } - os_scsi_tapes[dev_num] = tpnt; - tpnt->buffer = buffer; - tpnt->device = SDp; - drive->private_data = &tpnt->driver; - sprintf(drive->disk_name, "osst%d", dev_num); - tpnt->driver = &osst_template; - tpnt->drive = drive; - tpnt->in_use = 0; - tpnt->capacity = 0xfffff; - tpnt->dirty = 0; - tpnt->drv_buffer = 1; /* Try buffering if no mode sense */ - tpnt->restr_dma = (SDp->host)->unchecked_isa_dma; - tpnt->density = 0; - tpnt->do_auto_lock = OSST_AUTO_LOCK; - tpnt->can_bsr = OSST_IN_FILE_POS; - tpnt->can_partitions = 0; - tpnt->two_fm = OSST_TWO_FM; - tpnt->fast_mteom = OSST_FAST_MTEOM; - tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */ - tpnt->write_threshold = osst_write_threshold; - tpnt->default_drvbuffer = 0xff; /* No forced buffering */ - tpnt->partition = 0; - tpnt->new_partition = 0; - tpnt->nbr_partitions = 0; - tpnt->min_block = 512; - tpnt->max_block = OS_DATA_SIZE; - tpnt->timeout = OSST_TIMEOUT; - tpnt->long_timeout = OSST_LONG_TIMEOUT; - - /* Recognize OnStream tapes */ - /* We don't need to test for OnStream, as this has been done in detect () */ - tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev); - tpnt->omit_blklims = 1; - - tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) || - (strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp); - tpnt->frame_in_buffer = 0; - tpnt->header_ok = 0; - tpnt->linux_media = 0; - tpnt->header_cache = NULL; - - for (i=0; i < ST_NBR_MODES; i++) { - STm = &(tpnt->modes[i]); - STm->defined = 0; - STm->sysv = OSST_SYSV; - STm->defaults_for_writes = 0; - STm->do_async_writes = OSST_ASYNC_WRITES; - STm->do_buffer_writes = OSST_BUFFER_WRITES; - STm->do_read_ahead = OSST_READ_AHEAD; - STm->default_compression = ST_DONT_TOUCH; - STm->default_blksize = 512; - STm->default_density = (-1); /* No forced density */ - } - - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(tpnt->ps[i]); - STps->rw = ST_IDLE; - STps->eof = ST_NOEOF; - STps->at_sm = 0; - STps->last_block_valid = 0; - STps->drv_block = (-1); - STps->drv_file = (-1); - } - - tpnt->current_mode = 0; - tpnt->modes[0].defined = 1; - tpnt->modes[2].defined = 1; - tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0; - - mutex_init(&tpnt->lock); - osst_nr_dev++; - write_unlock(&os_scsi_tapes_lock); - - { - char name[8]; - - /* Rewind entry */ - err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt)); - if (err) - goto out_free_buffer; - - /* No-rewind entry */ - snprintf(name, 8, "%s%s", "n", tape_name(tpnt)); - err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name); - if (err) - goto out_free_sysfs1; - } - - sdev_printk(KERN_INFO, SDp, - "osst :I: Attached OnStream %.5s tape as %s\n", - SDp->model, tape_name(tpnt)); - - return 0; - -out_free_sysfs1: - osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num)); -out_free_buffer: - kfree(buffer); -out_put_disk: - put_disk(drive); - return err; -}; - -static int osst_remove(struct device *dev) -{ - struct scsi_device * SDp = to_scsi_device(dev); - struct osst_tape * tpnt; - int i; - - if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0)) - return 0; - - write_lock(&os_scsi_tapes_lock); - for(i=0; i < osst_max_dev; i++) { - if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) { - osst_sysfs_destroy(MKDEV(OSST_MAJOR, i)); - osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128)); - tpnt->device = NULL; - put_disk(tpnt->drive); - os_scsi_tapes[i] = NULL; - osst_nr_dev--; - write_unlock(&os_scsi_tapes_lock); - vfree(tpnt->header_cache); - if (tpnt->buffer) { - normalize_buffer(tpnt->buffer); - kfree(tpnt->buffer); - } - kfree(tpnt); - return 0; - } - } - write_unlock(&os_scsi_tapes_lock); - return 0; -} - -static int __init init_osst(void) -{ - int err; - - printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid); - - validate_options(); - - err = osst_sysfs_init(); - if (err) - return err; - - err = register_chrdev(OSST_MAJOR, "osst", &osst_fops); - if (err < 0) { - printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR); - goto err_out; - } - - err = scsi_register_driver(&osst_template.gendrv); - if (err) - goto err_out_chrdev; - - err = osst_create_sysfs_files(&osst_template.gendrv); - if (err) - goto err_out_scsidrv; - - return 0; - -err_out_scsidrv: - scsi_unregister_driver(&osst_template.gendrv); -err_out_chrdev: - unregister_chrdev(OSST_MAJOR, "osst"); -err_out: - osst_sysfs_cleanup(); - return err; -} - -static void __exit exit_osst (void) -{ - int i; - struct osst_tape * STp; - - osst_remove_sysfs_files(&osst_template.gendrv); - scsi_unregister_driver(&osst_template.gendrv); - unregister_chrdev(OSST_MAJOR, "osst"); - osst_sysfs_cleanup(); - - if (os_scsi_tapes) { - for (i=0; i < osst_max_dev; ++i) { - if (!(STp = os_scsi_tapes[i])) continue; - /* This is defensive, supposed to happen during detach */ - vfree(STp->header_cache); - if (STp->buffer) { - normalize_buffer(STp->buffer); - kfree(STp->buffer); - } - put_disk(STp->drive); - kfree(STp); - } - kfree(os_scsi_tapes); - } - printk(KERN_INFO "osst :I: Unloaded.\n"); -} - -module_init(init_osst); -module_exit(exit_osst); diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h deleted file mode 100644 index b90ae280853d..000000000000 --- a/drivers/scsi/osst.h +++ /dev/null @@ -1,651 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * $Header: /cvsroot/osst/Driver/osst.h,v 1.16 2005/01/01 21:13:35 wriede Exp $ - */ - -#include <asm/byteorder.h> -#include <linux/completion.h> -#include <linux/mutex.h> - -/* FIXME - rename and use the following two types or delete them! - * and the types really should go to st.h anyway... - * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C) - */ -typedef struct { - unsigned device_type :5; /* Peripheral Device Type */ - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned iso_version :2; /* ISO Version */ - unsigned response_format :4; /* Response Data Format */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_7 :1; /* AENC - Reserved */ - u8 additional_length; /* Additional Length (total_length-4) */ - u8 rsv5, rsv6, rsv7; /* Reserved */ - u8 vendor_id[8]; /* Vendor Identification */ - u8 product_id[16]; /* Product Identification */ - u8 revision_level[4]; /* Revision Level */ - u8 vendor_specific[20]; /* Vendor Specific - Optional */ - u8 reserved56t95[40]; /* Reserved - Optional */ - /* Additional information may be returned */ -} idetape_inquiry_result_t; - -/* - * READ POSITION packet command - Data Format (From Table 6-57) - */ -typedef struct { - unsigned reserved0_10 :2; /* Reserved */ - unsigned bpu :1; /* Block Position Unknown */ - unsigned reserved0_543 :3; /* Reserved */ - unsigned eop :1; /* End Of Partition */ - unsigned bop :1; /* Beginning Of Partition */ - u8 partition; /* Partition Number */ - u8 reserved2, reserved3; /* Reserved */ - u32 first_block; /* First Block Location */ - u32 last_block; /* Last Block Location (Optional) */ - u8 reserved12; /* Reserved */ - u8 blocks_in_buffer[3]; /* Blocks In Buffer - (Optional) */ - u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */ -} idetape_read_position_result_t; - -/* - * Follows structures which are related to the SELECT SENSE / MODE SENSE - * packet commands. - */ -#define COMPRESSION_PAGE 0x0f -#define COMPRESSION_PAGE_LENGTH 16 - -#define CAPABILITIES_PAGE 0x2a -#define CAPABILITIES_PAGE_LENGTH 20 - -#define TAPE_PARAMTR_PAGE 0x2b -#define TAPE_PARAMTR_PAGE_LENGTH 16 - -#define NUMBER_RETRIES_PAGE 0x2f -#define NUMBER_RETRIES_PAGE_LENGTH 4 - -#define BLOCK_SIZE_PAGE 0x30 -#define BLOCK_SIZE_PAGE_LENGTH 4 - -#define BUFFER_FILLING_PAGE 0x33 -#define BUFFER_FILLING_PAGE_LENGTH 4 - -#define VENDOR_IDENT_PAGE 0x36 -#define VENDOR_IDENT_PAGE_LENGTH 8 - -#define LOCATE_STATUS_PAGE 0x37 -#define LOCATE_STATUS_PAGE_LENGTH 0 - -#define MODE_HEADER_LENGTH 4 - - -/* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { - unsigned error_code :7; /* Current of deferred errors */ - unsigned valid :1; /* The information field conforms to QIC-157C */ - u8 reserved1 :8; /* Segment Number - Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned eom :1; /* End Of Medium */ - unsigned filemark :1; /* Filemark */ - u32 information __attribute__ ((packed)); - u8 asl; /* Additional sense length (n-7) */ - u32 command_specific; /* Additional command specific information */ - u8 asc; /* Additional Sense Code */ - u8 ascq; /* Additional Sense Code Qualifier */ - u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - unsigned sk_specific1 :7; /* Sense Key Specific */ - unsigned sksv :1; /* Sense Key Specific information is valid */ - u8 sk_specific2; /* Sense Key Specific */ - u8 sk_specific3; /* Sense Key Specific */ - u8 pad[2]; /* Padding to 20 bytes */ -} idetape_request_sense_result_t; - -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - u8 mode_data_length; /* Length of the following data transfer */ - u8 medium_type; /* Medium Type */ - u8 dsp; /* Device Specific Parameter */ - u8 bdl; /* Block Descriptor Length */ -} osst_mode_parameter_header_t; - -/* - * Mode Parameter Block Descriptor the MODE SENSE packet command - * - * Support for block descriptors is optional. - */ -typedef struct { - u8 density_code; /* Medium density code */ - u8 blocks[3]; /* Number of blocks */ - u8 reserved4; /* Reserved */ - u8 length[3]; /* Block Length */ -} osst_parameter_block_descriptor_t; - -/* - * The Data Compression Page, as returned by the MODE SENSE packet command. - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved0 :1; /* Reserved */ - unsigned page_code :6; /* Page Code - Should be 0xf */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page Code - Should be 0xf */ - unsigned reserved0 :1; /* Reserved */ - unsigned ps :1; -#else -#error "Please fix <asm/byteorder.h>" -#endif - u8 page_length; /* Page Length - Should be 14 */ -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned dce :1; /* Data Compression Enable */ - unsigned dcc :1; /* Data Compression Capable */ - unsigned reserved2 :6; /* Reserved */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved2 :6; /* Reserved */ - unsigned dcc :1; /* Data Compression Capable */ - unsigned dce :1; /* Data Compression Enable */ -#else -#error "Please fix <asm/byteorder.h>" -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned dde :1; /* Data Decompression Enable */ - unsigned red :2; /* Report Exception on Decompression */ - unsigned reserved3 :5; /* Reserved */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved3 :5; /* Reserved */ - unsigned red :2; /* Report Exception on Decompression */ - unsigned dde :1; /* Data Decompression Enable */ -#else -#error "Please fix <asm/byteorder.h>" -#endif - u32 ca; /* Compression Algorithm */ - u32 da; /* Decompression Algorithm */ - u8 reserved[4]; /* Reserved */ -} osst_data_compression_page_t; - -/* - * The Medium Partition Page, as returned by the MODE SENSE packet command. - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page Code - Should be 0x11 */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page Code - Should be 0x11 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; -#else -#error "Please fix <asm/byteorder.h>" -#endif - u8 page_length; /* Page Length - Should be 6 */ - u8 map; /* Maximum Additional Partitions - Should be 0 */ - u8 apd; /* Additional Partitions Defined - Should be 0 */ -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned fdp :1; /* Fixed Data Partitions */ - unsigned sdp :1; /* Should be 0 */ - unsigned idp :1; /* Should be 0 */ - unsigned psum :2; /* Should be 0 */ - unsigned reserved4_012 :3; /* Reserved */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved4_012 :3; /* Reserved */ - unsigned psum :2; /* Should be 0 */ - unsigned idp :1; /* Should be 0 */ - unsigned sdp :1; /* Should be 0 */ - unsigned fdp :1; /* Fixed Data Partitions */ -#else -#error "Please fix <asm/byteorder.h>" -#endif - u8 mfr; /* Medium Format Recognition */ - u8 reserved[2]; /* Reserved */ -} osst_medium_partition_page_t; - -/* - * Capabilities and Mechanical Status Page - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved1_67 :2; - unsigned page_code :6; /* Page code - Should be 0x2a */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x2a */ - unsigned reserved1_67 :2; -#else -#error "Please fix <asm/byteorder.h>" -#endif - u8 page_length; /* Page Length - Should be 0x12 */ - u8 reserved2, reserved3; -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved4_67 :2; - unsigned sprev :1; /* Supports SPACE in the reverse direction */ - unsigned reserved4_1234 :4; - unsigned ro :1; /* Read Only Mode */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned ro :1; /* Read Only Mode */ - unsigned reserved4_1234 :4; - unsigned sprev :1; /* Supports SPACE in the reverse direction */ - unsigned reserved4_67 :2; -#else -#error "Please fix <asm/byteorder.h>" -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved5_67 :2; - unsigned qfa :1; /* Supports the QFA two partition formats */ - unsigned reserved5_4 :1; - unsigned efmt :1; /* Supports ERASE command initiated formatting */ - unsigned reserved5_012 :3; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved5_012 :3; - unsigned efmt :1; /* Supports ERASE command initiated formatting */ - unsigned reserved5_4 :1; - unsigned qfa :1; /* Supports the QFA two partition formats */ - unsigned reserved5_67 :2; -#else -#error "Please fix <asm/byteorder.h>" -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned cmprs :1; /* Supports data compression */ - unsigned ecc :1; /* Supports error correction */ - unsigned reserved6_45 :2; /* Reserved */ - unsigned eject :1; /* The device can eject the volume */ - unsigned prevent :1; /* The device defaults in the prevent state after power up */ - unsigned locked :1; /* The volume is locked */ - unsigned lock :1; /* Supports locking the volume */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned lock :1; /* Supports locking the volume */ - unsigned locked :1; /* The volume is locked */ - unsigned prevent :1; /* The device defaults in the prevent state after power up */ - unsigned eject :1; /* The device can eject the volume */ - unsigned reserved6_45 :2; /* Reserved */ - unsigned ecc :1; /* Supports error correction */ - unsigned cmprs :1; /* Supports data compression */ -#else -#error "Please fix <asm/byteorder.h>" -#endif -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */ - /* transfers for slow buffer memory ??? */ - /* Also 32768 block size in some cases */ - unsigned reserved7_3_6 :4; - unsigned blk1024 :1; /* Supports 1024 bytes block size */ - unsigned blk512 :1; /* Supports 512 bytes block size */ - unsigned reserved7_0 :1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved7_0 :1; - unsigned blk512 :1; /* Supports 512 bytes block size */ - unsigned blk1024 :1; /* Supports 1024 bytes block size */ - unsigned reserved7_3_6 :4; - unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */ - /* transfers for slow buffer memory ??? */ - /* Also 32768 block size in some cases */ -#else -#error "Please fix <asm/byteorder.h>" -#endif - __be16 max_speed; /* Maximum speed supported in KBps */ - u8 reserved10, reserved11; - __be16 ctl; /* Continuous Transfer Limit in blocks */ - __be16 speed; /* Current Speed, in KBps */ - __be16 buffer_size; /* Buffer Size, in 512 bytes */ - u8 reserved18, reserved19; -} osst_capabilities_page_t; - -/* - * Block Size Page - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved1_6 :1; - unsigned page_code :6; /* Page code - Should be 0x30 */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x30 */ - unsigned reserved1_6 :1; - unsigned ps :1; -#else -#error "Please fix <asm/byteorder.h>" -#endif - u8 page_length; /* Page Length - Should be 2 */ - u8 reserved2; -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned one :1; - unsigned reserved2_6 :1; - unsigned record32_5 :1; - unsigned record32 :1; - unsigned reserved2_23 :2; - unsigned play32_5 :1; - unsigned play32 :1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned play32 :1; - unsigned play32_5 :1; - unsigned reserved2_23 :2; - unsigned record32 :1; - unsigned record32_5 :1; - unsigned reserved2_6 :1; - unsigned one :1; -#else -#error "Please fix <asm/byteorder.h>" -#endif -} osst_block_size_page_t; - -/* - * Tape Parameters Page - */ -typedef struct { -#if defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; - unsigned reserved1_6 :1; - unsigned page_code :6; /* Page code - Should be 0x2b */ -#elif defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x2b */ - unsigned reserved1_6 :1; - unsigned ps :1; -#else -#error "Please fix <asm/byteorder.h>" -#endif - u8 reserved2; - u8 density; - u8 reserved3,reserved4; - __be16 segtrk; - __be16 trks; - u8 reserved5,reserved6,reserved7,reserved8,reserved9,reserved10; -} osst_tape_paramtr_page_t; - -/* OnStream definitions */ - -#define OS_CONFIG_PARTITION (0xff) -#define OS_DATA_PARTITION (0) -#define OS_PARTITION_VERSION (1) - -/* - * partition - */ -typedef struct os_partition_s { - __u8 partition_num; - __u8 par_desc_ver; - __be16 wrt_pass_cntr; - __be32 first_frame_ppos; - __be32 last_frame_ppos; - __be32 eod_frame_ppos; -} os_partition_t; - -/* - * DAT entry - */ -typedef struct os_dat_entry_s { - __be32 blk_sz; - __be16 blk_cnt; - __u8 flags; - __u8 reserved; -} os_dat_entry_t; - -/* - * DAT - */ -#define OS_DAT_FLAGS_DATA (0xc) -#define OS_DAT_FLAGS_MARK (0x1) - -typedef struct os_dat_s { - __u8 dat_sz; - __u8 reserved1; - __u8 entry_cnt; - __u8 reserved3; - os_dat_entry_t dat_list[16]; -} os_dat_t; - -/* - * Frame types - */ -#define OS_FRAME_TYPE_FILL (0) -#define OS_FRAME_TYPE_EOD (1 << 0) -#define OS_FRAME_TYPE_MARKER (1 << 1) -#define OS_FRAME_TYPE_HEADER (1 << 3) -#define OS_FRAME_TYPE_DATA (1 << 7) - -/* - * AUX - */ -typedef struct os_aux_s { - __be32 format_id; /* hardware compatibility AUX is based on */ - char application_sig[4]; /* driver used to write this media */ - __be32 hdwr; /* reserved */ - __be32 update_frame_cntr; /* for configuration frame */ - __u8 frame_type; - __u8 frame_type_reserved; - __u8 reserved_18_19[2]; - os_partition_t partition; - __u8 reserved_36_43[8]; - __be32 frame_seq_num; - __be32 logical_blk_num_high; - __be32 logical_blk_num; - os_dat_t dat; - __u8 reserved188_191[4]; - __be32 filemark_cnt; - __be32 phys_fm; - __be32 last_mark_ppos; - __u8 reserved204_223[20]; - - /* - * __u8 app_specific[32]; - * - * Linux specific fields: - */ - __be32 next_mark_ppos; /* when known, points to next marker */ - __be32 last_mark_lbn; /* storing log_blk_num of last mark is extends ADR spec */ - __u8 linux_specific[24]; - - __u8 reserved_256_511[256]; -} os_aux_t; - -#define OS_FM_TAB_MAX 1024 - -typedef struct os_fm_tab_s { - __u8 fm_part_num; - __u8 reserved_1; - __u8 fm_tab_ent_sz; - __u8 reserved_3; - __be16 fm_tab_ent_cnt; - __u8 reserved6_15[10]; - __be32 fm_tab_ent[OS_FM_TAB_MAX]; -} os_fm_tab_t; - -typedef struct os_ext_trk_ey_s { - __u8 et_part_num; - __u8 fmt; - __be16 fm_tab_off; - __u8 reserved4_7[4]; - __be32 last_hlb_hi; - __be32 last_hlb; - __be32 last_pp; - __u8 reserved20_31[12]; -} os_ext_trk_ey_t; - -typedef struct os_ext_trk_tb_s { - __u8 nr_stream_part; - __u8 reserved_1; - __u8 et_ent_sz; - __u8 reserved3_15[13]; - os_ext_trk_ey_t dat_ext_trk_ey; - os_ext_trk_ey_t qfa_ext_trk_ey; -} os_ext_trk_tb_t; - -typedef struct os_header_s { - char ident_str[8]; - __u8 major_rev; - __u8 minor_rev; - __be16 ext_trk_tb_off; - __u8 reserved12_15[4]; - __u8 pt_par_num; - __u8 pt_reserved1_3[3]; - os_partition_t partition[16]; - __be32 cfg_col_width; - __be32 dat_col_width; - __be32 qfa_col_width; - __u8 cartridge[16]; - __u8 reserved304_511[208]; - __be32 old_filemark_list[16680/4]; /* in ADR 1.4 __u8 track_table[16680] */ - os_ext_trk_tb_t ext_track_tb; - __u8 reserved17272_17735[464]; - os_fm_tab_t dat_fm_tab; - os_fm_tab_t qfa_fm_tab; - __u8 reserved25960_32767[6808]; -} os_header_t; - - -/* - * OnStream ADRL frame - */ -#define OS_FRAME_SIZE (32 * 1024 + 512) -#define OS_DATA_SIZE (32 * 1024) -#define OS_AUX_SIZE (512) -//#define OSST_MAX_SG 2 - -/* The OnStream tape buffer descriptor. */ -struct osst_buffer { - unsigned char in_use; - unsigned char dma; /* DMA-able buffer */ - int buffer_size; - int buffer_blocks; - int buffer_bytes; - int read_pointer; - int writing; - int midlevel_result; - int syscall_result; - struct osst_request *last_SRpnt; - struct st_cmdstatus cmdstat; - struct rq_map_data map_data; - unsigned char *b_data; - os_aux_t *aux; /* onstream AUX structure at end of each block */ - unsigned short use_sg; /* zero or number of s/g segments for this adapter */ - unsigned short sg_segs; /* number of segments in s/g list */ - unsigned short orig_sg_segs; /* number of segments allocated at first try */ - struct scatterlist sg[1]; /* MUST BE last item */ -} ; - -/* The OnStream tape drive descriptor */ -struct osst_tape { - struct scsi_driver *driver; - unsigned capacity; - struct scsi_device *device; - struct mutex lock; /* for serialization */ - struct completion wait; /* for SCSI commands */ - struct osst_buffer * buffer; - - /* Drive characteristics */ - unsigned char omit_blklims; - unsigned char do_auto_lock; - unsigned char can_bsr; - unsigned char can_partitions; - unsigned char two_fm; - unsigned char fast_mteom; - unsigned char restr_dma; - unsigned char scsi2_logical; - unsigned char default_drvbuffer; /* 0xff = don't touch, value 3 bits */ - unsigned char pos_unknown; /* after reset position unknown */ - int write_threshold; - int timeout; /* timeout for normal commands */ - int long_timeout; /* timeout for commands known to take long time*/ - - /* Mode characteristics */ - struct st_modedef modes[ST_NBR_MODES]; - int current_mode; - - /* Status variables */ - int partition; - int new_partition; - int nbr_partitions; /* zero until partition support enabled */ - struct st_partstat ps[ST_NBR_PARTITIONS]; - unsigned char dirty; - unsigned char ready; - unsigned char write_prot; - unsigned char drv_write_prot; - unsigned char in_use; - unsigned char blksize_changed; - unsigned char density_changed; - unsigned char compression_changed; - unsigned char drv_buffer; - unsigned char density; - unsigned char door_locked; - unsigned char rew_at_close; - unsigned char inited; - int block_size; - int min_block; - int max_block; - int recover_count; /* from tape opening */ - int abort_count; - int write_count; - int read_count; - int recover_erreg; /* from last status call */ - /* - * OnStream specific data - */ - int os_fw_rev; /* the firmware revision * 10000 */ - unsigned char raw; /* flag OnStream raw access (32.5KB block size) */ - unsigned char poll; /* flag that this drive needs polling (IDE|firmware) */ - unsigned char frame_in_buffer; /* flag that the frame as per frame_seq_number - * has been read into STp->buffer and is valid */ - int frame_seq_number; /* logical frame number */ - int logical_blk_num; /* logical block number */ - unsigned first_frame_position; /* physical frame to be transferred to/from host */ - unsigned last_frame_position; /* physical frame to be transferd to/from tape */ - int cur_frames; /* current number of frames in internal buffer */ - int max_frames; /* max number of frames in internal buffer */ - char application_sig[5]; /* application signature */ - unsigned char fast_open; /* flag that reminds us we didn't check headers at open */ - unsigned short wrt_pass_cntr; /* write pass counter */ - int update_frame_cntr; /* update frame counter */ - int onstream_write_error; /* write error recovery active */ - int header_ok; /* header frame verified ok */ - int linux_media; /* reading linux-specifc media */ - int linux_media_version; - os_header_t * header_cache; /* cache is kept for filemark positions */ - int filemark_cnt; - int first_mark_ppos; - int last_mark_ppos; - int last_mark_lbn; /* storing log_blk_num of last mark is extends ADR spec */ - int first_data_ppos; - int eod_frame_ppos; - int eod_frame_lfa; - int write_type; /* used in write error recovery */ - int read_error_frame; /* used in read error recovery */ - unsigned long cmd_start_time; - unsigned long max_cmd_time; - -#if DEBUG - unsigned char write_pending; - int nbr_finished; - int nbr_waits; - unsigned char last_cmnd[6]; - unsigned char last_sense[16]; -#endif - struct gendisk *drive; -} ; - -/* scsi tape command */ -struct osst_request { - unsigned char cmd[MAX_COMMAND_SIZE]; - unsigned char sense[SCSI_SENSE_BUFFERSIZE]; - int result; - struct osst_tape *stp; - struct completion *waiting; - struct bio *bio; -}; - -/* Values of write_type */ -#define OS_WRITE_DATA 0 -#define OS_WRITE_EOD 1 -#define OS_WRITE_NEW_MARK 2 -#define OS_WRITE_LAST_MARK 3 -#define OS_WRITE_HEADER 4 -#define OS_WRITE_FILLER 5 - -/* Additional rw state */ -#define OS_WRITING_COMPLETE 3 diff --git a/drivers/scsi/osst_detect.h b/drivers/scsi/osst_detect.h deleted file mode 100644 index 83c1d4fb11db..000000000000 --- a/drivers/scsi/osst_detect.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#define SIGS_FROM_OSST \ - {"OnStream", "SC-", "", "osst"}, \ - {"OnStream", "DI-", "", "osst"}, \ - {"OnStream", "DP-", "", "osst"}, \ - {"OnStream", "FW-", "", "osst"}, \ - {"OnStream", "USB", "", "osst"} diff --git a/drivers/scsi/osst_options.h b/drivers/scsi/osst_options.h deleted file mode 100644 index a6a389b88876..000000000000 --- a/drivers/scsi/osst_options.h +++ /dev/null @@ -1,107 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - The compile-time configurable defaults for the Linux SCSI tape driver. - - Copyright 1995 Kai Makisara. - - Last modified: Wed Sep 2 21:24:07 1998 by root@home - - Changed (and renamed) for OnStream SCSI drives garloff@suse.de - 2000-06-21 - - $Header: /cvsroot/osst/Driver/osst_options.h,v 1.6 2003/12/23 14:22:12 wriede Exp $ -*/ - -#ifndef _OSST_OPTIONS_H -#define _OSST_OPTIONS_H - -/* The minimum limit for the number of SCSI tape devices is determined by - OSST_MAX_TAPES. If the number of tape devices and the "slack" defined by - OSST_EXTRA_DEVS exceeds OSST_MAX_TAPES, the large number is used. */ -#define OSST_MAX_TAPES 4 - -/* If OSST_IN_FILE_POS is nonzero, the driver positions the tape after the - record been read by the user program even if the tape has moved further - because of buffered reads. Should be set to zero to support also drives - that can't space backwards over records. NOTE: The tape will be - spaced backwards over an "accidentally" crossed filemark in any case. */ -#define OSST_IN_FILE_POS 1 - -/* The tape driver buffer size in kilobytes. */ -/* Don't change, as this is the HW blocksize */ -#define OSST_BUFFER_BLOCKS 32 - -/* The number of kilobytes of data in the buffer that triggers an - asynchronous write in fixed block mode. See also OSST_ASYNC_WRITES - below. */ -#define OSST_WRITE_THRESHOLD_BLOCKS 32 - -/* OSST_EOM_RESERVE defines the number of frames are kept in reserve for - * * write error recovery when writing near end of medium. ENOSPC is returned - * * when write() is called and the tape write position is within this number - * * of blocks from the tape capacity. */ -#define OSST_EOM_RESERVE 300 - -/* The maximum number of tape buffers the driver allocates. The number - is also constrained by the number of drives detected. Determines the - maximum number of concurrently active tape drives. */ -#define OSST_MAX_BUFFERS OSST_MAX_TAPES - -/* Maximum number of scatter/gather segments */ -/* Fit one buffer in pages and add one for the AUX header */ -#define OSST_MAX_SG (((OSST_BUFFER_BLOCKS*1024) / PAGE_SIZE) + 1) - -/* The number of scatter/gather segments to allocate at first try (must be - smaller or equal to the maximum). */ -#define OSST_FIRST_SG ((OSST_BUFFER_BLOCKS*1024) / PAGE_SIZE) - -/* The size of the first scatter/gather segments (determines the maximum block - size for SCSI adapters not supporting scatter/gather). The default is set - to try to allocate the buffer as one chunk. */ -#define OSST_FIRST_ORDER (15-PAGE_SHIFT) - - -/* The following lines define defaults for properties that can be set - separately for each drive using the MTSTOPTIONS ioctl. */ - -/* If OSST_TWO_FM is non-zero, the driver writes two filemarks after a - file being written. Some drives can't handle two filemarks at the - end of data. */ -#define OSST_TWO_FM 0 - -/* If OSST_BUFFER_WRITES is non-zero, writes in fixed block mode are - buffered until the driver buffer is full or asynchronous write is - triggered. */ -#define OSST_BUFFER_WRITES 1 - -/* If OSST_ASYNC_WRITES is non-zero, the SCSI write command may be started - without waiting for it to finish. May cause problems in multiple - tape backups. */ -#define OSST_ASYNC_WRITES 1 - -/* If OSST_READ_AHEAD is non-zero, blocks are read ahead in fixed block - mode. */ -#define OSST_READ_AHEAD 1 - -/* If OSST_AUTO_LOCK is non-zero, the drive door is locked at the first - read or write command after the device is opened. The door is opened - when the device is closed. */ -#define OSST_AUTO_LOCK 0 - -/* If OSST_FAST_MTEOM is non-zero, the MTEOM ioctl is done using the - direct SCSI command. The file number status is lost but this method - is fast with some drives. Otherwise MTEOM is done by spacing over - files and the file number status is retained. */ -#define OSST_FAST_MTEOM 0 - -/* If OSST_SCSI2LOGICAL is nonzero, the logical block addresses are used for - MTIOCPOS and MTSEEK by default. Vendor addresses are used if OSST_SCSI2LOGICAL - is zero. */ -#define OSST_SCSI2LOGICAL 0 - -/* If OSST_SYSV is non-zero, the tape behaves according to the SYS V semantics. - The default is BSD semantics. */ -#define OSST_SYSV 0 - - -#endif diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9c4c710dcccf..b9e7b291c129 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -228,7 +228,6 @@ static DEFINE_IDR(st_index_idr); -#include "osst_detect.h" #ifndef SIGS_FROM_OSST #define SIGS_FROM_OSST \ {"OnStream", "SC-", "", "osst"}, \ @@ -4267,9 +4266,10 @@ static int st_probe(struct device *dev) if (SDp->type != TYPE_TAPE) return -ENODEV; if ((stp = st_incompatible(SDp))) { - sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n"); sdev_printk(KERN_INFO, SDp, - "st: The suggested driver is %s.\n", stp); + "OnStream tapes are no longer supported;\n"); + sdev_printk(KERN_INFO, SDp, + "please mail to linux-scsi@vger.kernel.org.\n"); return -ENODEV; } |