diff options
| -rw-r--r-- | drivers/char/drm/r300_cmdbuf.c | 50 | ||||
| -rw-r--r-- | drivers/char/drm/r300_reg.h | 3 | ||||
| -rw-r--r-- | drivers/char/drm/radeon_drv.h | 3 |
3 files changed, 55 insertions, 1 deletions
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 291dbf4c8186..6dd21754ba67 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -161,6 +161,7 @@ void r300_init_reg_flags(void) ADD_RANGE(R300_VAP_PVS_CNTL_1, 3); ADD_RANGE(R300_GB_ENABLE, 1); ADD_RANGE(R300_GB_MSPOS0, 5); + ADD_RANGE(R300_TX_CNTL, 1); ADD_RANGE(R300_TX_ENABLE, 1); ADD_RANGE(0x4200, 4); ADD_RANGE(0x4214, 1); @@ -489,6 +490,52 @@ static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t *dev_priv, return 0; } +static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf) +{ + u32 *cmd = (u32 *) cmdbuf->buf; + int count, ret; + RING_LOCALS; + + count=(cmd[0]>>16) & 0x3fff; + + if (cmd[0] & 0x8000) { + u32 offset; + + if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL + | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) { + offset = cmd[2] << 10; + ret = r300_check_offset(dev_priv, offset); + if (ret) + { + DRM_ERROR("Invalid bitblt first offset is %08X\n", offset); + return DRM_ERR(EINVAL); + } + } + + if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) && + (cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) { + offset = cmd[3] << 10; + ret = r300_check_offset(dev_priv, offset); + if (ret) + { + DRM_ERROR("Invalid bitblt second offset is %08X\n", offset); + return DRM_ERR(EINVAL); + } + + } + } + + BEGIN_RING(count+2); + OUT_RING(cmd[0]); + OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1); + ADVANCE_RING(); + + cmdbuf->buf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, drm_radeon_kcmd_buffer_t *cmdbuf) @@ -527,6 +574,9 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */ return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header); + case RADEON_CNTL_BITBLT_MULTI: + return r300_emit_bitblt_multi(dev_priv, cmdbuf); + case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a0ed20e25221..d1e19954406b 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -451,6 +451,9 @@ I am fairly certain that they are correct unless stated otherwise in comments. /* END */ /* gap */ +/* Zero to flush caches. */ +#define R300_TX_CNTL 0x4100 + /* The upper enable bits are guessed, based on fglrx reported limits. */ #define R300_TX_ENABLE 0x4104 # define R300_TX_ENABLE_0 (1 << 0) diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 498b19b1d641..1f7d2ab8c4fc 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -90,9 +90,10 @@ * 1.19- Add support for gart table in FB memory and PCIE r300 * 1.20- Add support for r300 texrect * 1.21- Add support for card type getparam + * 1.22- Add support for texture cache flushes (R300_TX_CNTL) */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 21 +#define DRIVER_MINOR 22 #define DRIVER_PATCHLEVEL 0 /* |