aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/tty/serial/8250/8250_bcm7271.c13
-rw-r--r--drivers/tty/serial/8250/8250_pci.c39
-rw-r--r--drivers/tty/serial/8250/8250_port.c7
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/amba-pl011.c1
-rw-r--r--drivers/tty/serial/fsl_lpuart.c1
-rw-r--r--drivers/tty/serial/liteuart.c20
-rw-r--r--drivers/tty/serial/msm_serial.c3
-rw-r--r--drivers/tty/serial/serial-tegra.c4
-rw-r--r--drivers/tty/serial/serial_core.c18
-rw-r--r--drivers/video/console/vgacon.c14
12 files changed, 95 insertions, 33 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index faa9c34d837d..43007f2d29e0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16502,6 +16502,12 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
F: drivers/media/platform/sunxi/sun8i-rotate/
+RPMSG TTY DRIVER
+M: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+L: linux-remoteproc@vger.kernel.org
+S: Maintained
+F: drivers/tty/rpmsg_tty.c
+
RTL2830 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 7f656fac503f..5163d60756b7 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -237,6 +237,7 @@ struct brcmuart_priv {
u32 rx_err;
u32 rx_timeout;
u32 rx_abort;
+ u32 saved_mctrl;
};
static struct dentry *brcmuart_debugfs_root;
@@ -1133,16 +1134,27 @@ static int brcmuart_remove(struct platform_device *pdev)
static int __maybe_unused brcmuart_suspend(struct device *dev)
{
struct brcmuart_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ struct uart_port *port = &up->port;
serial8250_suspend_port(priv->line);
clk_disable_unprepare(priv->baud_mux_clk);
+ /*
+ * This will prevent resume from enabling RTS before the
+ * baud rate has been resored.
+ */
+ priv->saved_mctrl = port->mctrl;
+ port->mctrl = 0;
+
return 0;
}
static int __maybe_unused brcmuart_resume(struct device *dev)
{
struct brcmuart_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ struct uart_port *port = &up->port;
int ret;
ret = clk_prepare_enable(priv->baud_mux_clk);
@@ -1165,6 +1177,7 @@ static int __maybe_unused brcmuart_resume(struct device *dev)
start_rx_dma(serial8250_get_port(priv->line));
}
serial8250_resume_port(priv->line);
+ port->mctrl = priv->saved_mctrl;
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 5d43de143f33..60f8fffdfd77 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1324,29 +1324,33 @@ pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
{
int scr;
int lcr;
- int actual_baud;
- int tolerance;
- for (scr = 5 ; scr <= 15 ; scr++) {
- actual_baud = 921600 * 16 / scr;
- tolerance = actual_baud / 50;
+ for (scr = 16; scr > 4; scr--) {
+ unsigned int maxrate = port->uartclk / scr;
+ unsigned int divisor = max(maxrate / baud, 1U);
+ int delta = maxrate / divisor - baud;
- if ((baud < actual_baud + tolerance) &&
- (baud > actual_baud - tolerance)) {
+ if (baud > maxrate + baud / 50)
+ continue;
+ if (delta > baud / 50)
+ divisor++;
+
+ if (divisor > 0xffff)
+ continue;
+
+ /* Update delta due to possible divisor change */
+ delta = maxrate / divisor - baud;
+ if (abs(delta) < baud / 50) {
lcr = serial_port_in(port, UART_LCR);
serial_port_out(port, UART_LCR, lcr | 0x80);
-
- serial_port_out(port, UART_DLL, 1);
- serial_port_out(port, UART_DLM, 0);
+ serial_port_out(port, UART_DLL, divisor & 0xff);
+ serial_port_out(port, UART_DLM, divisor >> 8 & 0xff);
serial_port_out(port, 2, 16 - scr);
serial_port_out(port, UART_LCR, lcr);
return;
- } else if (baud > actual_baud) {
- break;
}
}
- serial8250_do_set_divisor(port, baud, quot, quot_frac);
}
static int pci_pericom_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -2291,7 +2295,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.setup = pci_pericom_setup_four_at_eight,
},
{
- .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
.device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -2299,6 +2303,13 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
},
{
.vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup_four_at_eight,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5775cbff8f6e..46e2079ad1aa 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2024,13 +2024,6 @@ void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char mcr;
- if (port->rs485.flags & SER_RS485_ENABLED) {
- if (serial8250_in_MCR(up) & UART_MCR_RTS)
- mctrl |= TIOCM_RTS;
- else
- mctrl &= ~TIOCM_RTS;
- }
-
mcr = serial8250_TIOCM_to_MCR(mctrl);
mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6ff94cfcd9db..fc543ac97c13 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1533,7 +1533,7 @@ config SERIAL_LITEUART
tristate "LiteUART serial port support"
depends on HAS_IOMEM
depends on OF || COMPILE_TEST
- depends on LITEX
+ depends on LITEX || COMPILE_TEST
select SERIAL_CORE
help
This driver is for the FPGA-based LiteUART serial controller from LiteX
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d361cd84ff8c..52518a606c06 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2947,6 +2947,7 @@ MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
static const struct acpi_device_id __maybe_unused sbsa_uart_acpi_match[] = {
{ "ARMH0011", 0 },
+ { "ARMHB000", 0 },
{},
};
MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b1e7190ae483..ac5112def40d 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2625,6 +2625,7 @@ OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup);
EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index dbc0559a9157..2941659e5274 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -270,8 +270,10 @@ static int liteuart_probe(struct platform_device *pdev)
/* get membase */
port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
- if (IS_ERR(port->membase))
- return PTR_ERR(port->membase);
+ if (IS_ERR(port->membase)) {
+ ret = PTR_ERR(port->membase);
+ goto err_erase_id;
+ }
/* values not from device tree */
port->dev = &pdev->dev;
@@ -285,7 +287,18 @@ static int liteuart_probe(struct platform_device *pdev)
port->line = dev_id;
spin_lock_init(&port->lock);
- return uart_add_one_port(&liteuart_driver, &uart->port);
+ platform_set_drvdata(pdev, port);
+
+ ret = uart_add_one_port(&liteuart_driver, &uart->port);
+ if (ret)
+ goto err_erase_id;
+
+ return 0;
+
+err_erase_id:
+ xa_erase(&liteuart_array, uart->id);
+
+ return ret;
}
static int liteuart_remove(struct platform_device *pdev)
@@ -293,6 +306,7 @@ static int liteuart_remove(struct platform_device *pdev)
struct uart_port *port = platform_get_drvdata(pdev);
struct liteuart_port *uart = to_liteuart_port(port);
+ uart_remove_one_port(&liteuart_driver, port);
xa_erase(&liteuart_array, uart->id);
return 0;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index fcef7a961430..489d19274f9a 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -598,6 +598,9 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
u32 val;
int ret;
+ if (IS_ENABLED(CONFIG_CONSOLE_POLL))
+ return;
+
if (!dma->chan)
return;
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 45e2e4109acd..b6223fab0687 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1506,7 +1506,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = {
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
@@ -1517,7 +1517,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = {
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 1e738f265eea..61e3dd0222af 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1075,6 +1075,11 @@ uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
goto out;
if (!tty_io_error(tty)) {
+ if (uport->rs485.flags & SER_RS485_ENABLED) {
+ set &= ~TIOCM_RTS;
+ clear &= ~TIOCM_RTS;
+ }
+
uart_update_mctrl(uport, set, clear);
ret = 0;
}
@@ -1549,6 +1554,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = uart_port_check(state);
+ char *buf;
/*
* At this point, we stop accepting input. To do this, we
@@ -1570,8 +1576,18 @@ static void uart_tty_port_shutdown(struct tty_port *port)
*/
tty_port_set_suspended(port, 0);
- uart_change_pm(state, UART_PM_STATE_OFF);
+ /*
+ * Free the transmit buffer.
+ */
+ spin_lock_irq(&uport->lock);
+ buf = state->xmit.buf;
+ state->xmit.buf = NULL;
+ spin_unlock_irq(&uport->lock);
+ if (buf)
+ free_page((unsigned long)buf);
+
+ uart_change_pm(state, UART_PM_STATE_OFF);
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index ef9c57ce0906..9a49ea6b5112 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -366,11 +366,17 @@ static void vgacon_init(struct vc_data *c, int init)
struct uni_pagedir *p;
/*
- * We cannot be loaded as a module, therefore init is always 1,
- * but vgacon_init can be called more than once, and init will
- * not be 1.
+ * We cannot be loaded as a module, therefore init will be 1
+ * if we are the default console, however if we are a fallback
+ * console, for example if fbcon has failed registration, then
+ * init will be 0, so we need to make sure our boot parameters
+ * have been copied to the console structure for vgacon_resize
+ * ultimately called by vc_resize. Any subsequent calls to
+ * vgacon_init init will have init set to 0 too.
*/
c->vc_can_do_color = vga_can_do_color;
+ c->vc_scan_lines = vga_scan_lines;
+ c->vc_font.height = c->vc_cell_height = vga_video_font_height;
/* set dimensions manually if init != 0 since vc_resize() will fail */
if (init) {
@@ -379,8 +385,6 @@ static void vgacon_init(struct vc_data *c, int init)
} else
vc_resize(c, vga_video_num_columns, vga_video_num_lines);
- c->vc_scan_lines = vga_scan_lines;
- c->vc_font.height = c->vc_cell_height = vga_video_font_height;
c->vc_complement_mask = 0x7700;
if (vga_512_chars)
c->vc_hi_font_mask = 0x0800;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 18:32:36 +0000