diff options
| -rw-r--r-- | Documentation/devicetree/bindings/reset/uniphier-reset.txt | 93 | ||||
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/reset/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/reset/reset-uniphier.c | 440 |
5 files changed, 545 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt new file mode 100644 index 000000000000..e6bbfccd56c3 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -0,0 +1,93 @@ +UniPhier reset controller + + +System reset +------------ + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC. + "socionext,uniphier-ld4-reset" - for PH1-LD4 SoC. + "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC. + "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC. + "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC. + "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC. +- #reset-cells: should be 1. + +Example: + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld20-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + reset { + compatible = "socionext,uniphier-ld20-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Media I/O (MIO) reset +--------------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC. + "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC. + "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC. + "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC. + "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC. + "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC. +- #reset-cells: should be 1. + +Example: + + mioctrl@59810000 { + compatible = "socionext,uniphier-ld20-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + reset { + compatible = "socionext,uniphier-ld20-mio-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; + + +Peripheral reset +---------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC. + "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC. + "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC. + "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC. + "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC. +- #reset-cells: should be 1. + +Example: + + perictrl@59820000 { + compatible = "socionext,uniphier-ld20-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + reset { + compatible = "socionext,uniphier-ld20-peri-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; diff --git a/MAINTAINERS b/MAINTAINERS index 20bb1d00098c..fde95b8f37db 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1830,6 +1830,7 @@ F: arch/arm64/boot/dts/socionext/ F: drivers/bus/uniphier-system-bus.c F: drivers/i2c/busses/i2c-uniphier* F: drivers/pinctrl/uniphier/ +F: drivers/reset/reset-uniphier.c F: drivers/tty/serial/8250/8250_uniphier.c N: uniphier diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 4be1b8c21f6f..7dfe8d84d6bb 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -27,6 +27,16 @@ config TI_SYSCON_RESET you wish to use the reset framework for such memory-mapped devices, say Y here. Otherwise, say N. +config RESET_UNIPHIER + tristate "Reset controller driver for UniPhier SoCs" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF && MFD_SYSCON + default ARCH_UNIPHIER + help + Support for reset controllers on UniPhier SoCs. + Say Y if you want to control reset signals provided by System Control + block, Media I/O block, Peripheral Block. + source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 64ebb0c4615c..9b45dcfa2a5f 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o obj-$(CONFIG_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o +obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c new file mode 100644 index 000000000000..8b2558e7363e --- /dev/null +++ b/drivers/reset/reset-uniphier.c @@ -0,0 +1,440 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +struct uniphier_reset_data { + unsigned int id; + unsigned int reg; + unsigned int bit; + unsigned int flags; +#define UNIPHIER_RESET_ACTIVE_LOW BIT(0) +}; + +#define UNIPHIER_RESET_ID_END (unsigned int)(-1) + +#define UNIPHIER_RESET_END \ + { .id = UNIPHIER_RESET_ID_END } + +#define UNIPHIER_RESET(_id, _reg, _bit) \ + { \ + .id = (_id), \ + .reg = (_reg), \ + .bit = (_bit), \ + } + +#define UNIPHIER_RESETX(_id, _reg, _bit) \ + { \ + .id = (_id), \ + .reg = (_reg), \ + .bit = (_bit), \ + .flags = UNIPHIER_RESET_ACTIVE_LOW, \ + } + +/* System reset data */ +#define UNIPHIER_SLD3_SYS_RESET_STDMAC(id) \ + UNIPHIER_RESETX((id), 0x2000, 10) + +#define UNIPHIER_LD11_SYS_RESET_STDMAC(id) \ + UNIPHIER_RESETX((id), 0x200c, 8) + +#define UNIPHIER_PRO4_SYS_RESET_GIO(id) \ + UNIPHIER_RESETX((id), 0x2000, 6) + +#define UNIPHIER_LD20_SYS_RESET_GIO(id) \ + UNIPHIER_RESETX((id), 0x200c, 5) + +#define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch) \ + UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17) + +const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* Ether, HSC, MIO */ + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, MIO, RLE */ + UNIPHIER_PRO4_SYS_RESET_GIO(12), /* Ether, SATA, USB3 */ + UNIPHIER_PRO4_SYS_RESET_USB3(14, 0), + UNIPHIER_PRO4_SYS_RESET_USB3(15, 1), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC */ + UNIPHIER_PRO4_SYS_RESET_GIO(12), /* PCIe, USB3 */ + UNIPHIER_PRO4_SYS_RESET_USB3(14, 0), + UNIPHIER_PRO4_SYS_RESET_USB3(15, 1), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = { + UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, RLE */ + UNIPHIER_PRO4_SYS_RESET_USB3(14, 0), + UNIPHIER_PRO4_SYS_RESET_USB3(15, 1), + UNIPHIER_RESETX(16, 0x2014, 4), /* USB30-PHY0 */ + UNIPHIER_RESETX(17, 0x2014, 0), /* USB30-PHY1 */ + UNIPHIER_RESETX(18, 0x2014, 2), /* USB30-PHY2 */ + UNIPHIER_RESETX(20, 0x2014, 5), /* USB31-PHY0 */ + UNIPHIER_RESETX(21, 0x2014, 1), /* USB31-PHY1 */ + UNIPHIER_RESETX(28, 0x2014, 12), /* SATA */ + UNIPHIER_RESET(29, 0x2014, 8), /* SATA-PHY (active high) */ + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = { + UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC, MIO */ + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = { + UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC */ + UNIPHIER_LD20_SYS_RESET_GIO(12), /* PCIe, USB3 */ + UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */ + UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */ + UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */ + UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */ + UNIPHIER_RESET_END, +}; + +/* Media I/O reset data */ +#define UNIPHIER_MIO_RESET_SD(id, ch) \ + UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0) + +#define UNIPHIER_MIO_RESET_SD_BRIDGE(id, ch) \ + UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 26) + +#define UNIPHIER_MIO_RESET_EMMC_HW_RESET(id, ch) \ + UNIPHIER_RESETX((id), 0x80 + 0x200 * (ch), 0) + +#define UNIPHIER_MIO_RESET_USB2(id, ch) \ + UNIPHIER_RESETX((id), 0x114 + 0x200 * (ch), 0) + +#define UNIPHIER_MIO_RESET_USB2_BRIDGE(id, ch) \ + UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 24) + +#define UNIPHIER_MIO_RESET_DMAC(id) \ + UNIPHIER_RESETX((id), 0x110, 17) + +const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = { + UNIPHIER_MIO_RESET_SD(0, 0), + UNIPHIER_MIO_RESET_SD(1, 1), + UNIPHIER_MIO_RESET_SD(2, 2), + UNIPHIER_MIO_RESET_SD_BRIDGE(3, 0), + UNIPHIER_MIO_RESET_SD_BRIDGE(4, 1), + UNIPHIER_MIO_RESET_SD_BRIDGE(5, 2), + UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), + UNIPHIER_MIO_RESET_DMAC(7), + UNIPHIER_MIO_RESET_USB2(8, 0), + UNIPHIER_MIO_RESET_USB2(9, 1), + UNIPHIER_MIO_RESET_USB2(10, 2), + UNIPHIER_MIO_RESET_USB2(11, 3), + UNIPHIER_MIO_RESET_USB2_BRIDGE(12, 0), + UNIPHIER_MIO_RESET_USB2_BRIDGE(13, 1), + UNIPHIER_MIO_RESET_USB2_BRIDGE(14, 2), + UNIPHIER_MIO_RESET_USB2_BRIDGE(15, 3), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = { + UNIPHIER_MIO_RESET_SD(0, 0), + UNIPHIER_MIO_RESET_SD(1, 1), + UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), + UNIPHIER_RESET_END, +}; + +/* Peripheral reset data */ +#define UNIPHIER_PERI_RESET_UART(id, ch) \ + UNIPHIER_RESETX((id), 0x114, 19 + (ch)) + +#define UNIPHIER_PERI_RESET_I2C(id, ch) \ + UNIPHIER_RESETX((id), 0x114, 5 + (ch)) + +#define UNIPHIER_PERI_RESET_FI2C(id, ch) \ + UNIPHIER_RESETX((id), 0x114, 24 + (ch)) + +const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = { + UNIPHIER_PERI_RESET_UART(0, 0), + UNIPHIER_PERI_RESET_UART(1, 1), + UNIPHIER_PERI_RESET_UART(2, 2), + UNIPHIER_PERI_RESET_UART(3, 3), + UNIPHIER_PERI_RESET_I2C(4, 0), + UNIPHIER_PERI_RESET_I2C(5, 1), + UNIPHIER_PERI_RESET_I2C(6, 2), + UNIPHIER_PERI_RESET_I2C(7, 3), + UNIPHIER_PERI_RESET_I2C(8, 4), + UNIPHIER_RESET_END, +}; + +const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = { + UNIPHIER_PERI_RESET_UART(0, 0), + UNIPHIER_PERI_RESET_UART(1, 1), + UNIPHIER_PERI_RESET_UART(2, 2), + UNIPHIER_PERI_RESET_UART(3, 3), + UNIPHIER_PERI_RESET_FI2C(4, 0), + UNIPHIER_PERI_RESET_FI2C(5, 1), + UNIPHIER_PERI_RESET_FI2C(6, 2), + UNIPHIER_PERI_RESET_FI2C(7, 3), + UNIPHIER_PERI_RESET_FI2C(8, 4), + UNIPHIER_PERI_RESET_FI2C(9, 5), + UNIPHIER_PERI_RESET_FI2C(10, 6), + UNIPHIER_RESET_END, +}; + +/* core implementaton */ +struct uniphier_reset_priv { + struct reset_controller_dev rcdev; + struct device *dev; + struct regmap *regmap; + const struct uniphier_reset_data *data; +}; + +#define to_uniphier_reset_priv(_rcdev) \ + container_of(_rcdev, struct uniphier_reset_priv, rcdev) + +static int uniphier_reset_update(struct reset_controller_dev *rcdev, + unsigned long id, int assert) +{ + struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev); + const struct uniphier_reset_data *p; + + for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) { + unsigned int mask, val; + + if (p->id != id) + continue; + + mask = BIT(p->bit); + + if (assert) + val = mask; + else + val = ~mask; + + if (p->flags & UNIPHIER_RESET_ACTIVE_LOW) + val = ~val; + + return regmap_write_bits(priv->regmap, p->reg, mask, val); + } + + dev_err(priv->dev, "reset_id=%lu was not handled\n", id); + return -EINVAL; +} + +static int uniphier_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return uniphier_reset_update(rcdev, id, 1); +} + +static int uniphier_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return uniphier_reset_update(rcdev, id, 0); +} + +static int uniphier_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev); + const struct uniphier_reset_data *p; + + for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) { + unsigned int val; + int ret, asserted; + + if (p->id != id) + continue; + + ret = regmap_read(priv->regmap, p->reg, &val); + if (ret) + return ret; + + asserted = !!(val & BIT(p->bit)); + + if (p->flags & UNIPHIER_RESET_ACTIVE_LOW) + asserted = !asserted; + + return asserted; + } + + dev_err(priv->dev, "reset_id=%lu was not found\n", id); + return -EINVAL; +} + +static const struct reset_control_ops uniphier_reset_ops = { + .assert = uniphier_reset_assert, + .deassert = uniphier_reset_deassert, + .status = uniphier_reset_status, +}; + +static int uniphier_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_reset_priv *priv; + const struct uniphier_reset_data *p, *data; + struct regmap *regmap; + struct device_node *parent; + unsigned int nr_resets = 0; + + data = of_device_get_match_data(dev); + if (WARN_ON(!data)) + return -EINVAL; + + parent = of_get_parent(dev->of_node); /* parent should be syscon node */ + regmap = syscon_node_to_regmap(parent); + of_node_put(parent); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to get regmap (error %ld)\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + for (p = data; p->id != UNIPHIER_RESET_ID_END; p++) + nr_resets = max(nr_resets, p->id + 1); + + priv->rcdev.ops = &uniphier_reset_ops; + priv->rcdev.owner = dev->driver->owner; + priv->rcdev.of_node = dev->of_node; + priv->rcdev.nr_resets = nr_resets; + priv->dev = dev; + priv->regmap = regmap; + priv->data = data; + + return devm_reset_controller_register(&pdev->dev, &priv->rcdev); +} + +static const struct of_device_id uniphier_reset_match[] = { + /* System reset */ + { + .compatible = "socionext,uniphier-sld3-reset", + .data = uniphier_sld3_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-ld4-reset", + .data = uniphier_sld3_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-pro4-reset", + .data = uniphier_pro4_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-sld8-reset", + .data = uniphier_sld3_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-pro5-reset", + .data = uniphier_pro5_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs2-reset", + .data = uniphier_pxs2_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-ld11-reset", + .data = uniphier_ld11_sys_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-reset", + .data = uniphier_ld20_sys_reset_data, + }, + /* Media I/O reset */ + { + .compatible = "socionext,uniphier-sld3-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld4-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pro4-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-sld8-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pro5-mio-reset", + .data = uniphier_pro5_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs2-mio-reset", + .data = uniphier_pro5_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld11-mio-reset", + .data = uniphier_sld3_mio_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-mio-reset", + .data = uniphier_pro5_mio_reset_data, + }, + /* Peripheral reset */ + { + .compatible = "socionext,uniphier-ld4-peri-reset", + .data = uniphier_ld4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-pro4-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-sld8-peri-reset", + .data = uniphier_ld4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-pro5-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-pxs2-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-ld11-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { + .compatible = "socionext,uniphier-ld20-peri-reset", + .data = uniphier_pro4_peri_reset_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_reset_match); + +static struct platform_driver uniphier_reset_driver = { + .probe = uniphier_reset_probe, + .driver = { + .name = "uniphier-reset", + .of_match_table = uniphier_reset_match, + }, +}; +module_platform_driver(uniphier_reset_driver); + +MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); +MODULE_DESCRIPTION("UniPhier Reset Controller Driver"); +MODULE_LICENSE("GPL"); |