diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/cpsw-phy-sel.txt | 28 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/cpsw-phy-sel.c | 161 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/cpsw.h | 2 |
5 files changed, 200 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt new file mode 100644 index 000000000000..7ff57a119f81 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt @@ -0,0 +1,28 @@ +TI CPSW Phy mode Selection Device Tree Bindings +----------------------------------------------- + +Required properties: +- compatible : Should be "ti,am3352-cpsw-phy-sel" +- reg : physical base address and size of the cpsw + registers map +- reg-names : names of the register map given in "reg" node + +Optional properties: +-rmii-clock-ext : If present, the driver will configure the RMII + interface to external clock usage + +Examples: + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; + +(or) + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + rmii-clock-ext; + }; diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index de71b1ec4625..53150c25a96b 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -49,11 +49,19 @@ config TI_DAVINCI_CPDMA To compile this driver as a module, choose M here: the module will be called davinci_cpdma. This is recommended. +config TI_CPSW_PHY_SEL + boolean "TI CPSW Switch Phy sel Support" + depends on TI_CPSW + ---help--- + This driver supports configuring of the phy mode connected to + the CPSW. + config TI_CPSW tristate "TI CPSW Switch Support" depends on ARM && (ARCH_DAVINCI || SOC_AM33XX) select TI_DAVINCI_CPDMA select TI_DAVINCI_MDIO + select TI_CPSW_PHY_SEL ---help--- This driver supports TI's CPSW Ethernet Switch. diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile index c65148e8aa1d..9cfaab8152be 100644 --- a/drivers/net/ethernet/ti/Makefile +++ b/drivers/net/ethernet/ti/Makefile @@ -7,5 +7,6 @@ obj-$(CONFIG_CPMAC) += cpmac.o obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o +obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o obj-$(CONFIG_TI_CPSW) += ti_cpsw.o ti_cpsw-y := cpsw_ale.o cpsw.o cpts.o diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c new file mode 100644 index 000000000000..e092edeab650 --- /dev/null +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -0,0 +1,161 @@ +/* Texas Instruments Ethernet Switch Driver + * + * Copyright (C) 2013 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "cpsw.h" + +/* AM33xx SoC specific definitions for the CONTROL port */ +#define AM33XX_GMII_SEL_MODE_MII 0 +#define AM33XX_GMII_SEL_MODE_RMII 1 +#define AM33XX_GMII_SEL_MODE_RGMII 2 + +#define AM33XX_GMII_SEL_RMII2_IO_CLK_EN BIT(7) +#define AM33XX_GMII_SEL_RMII1_IO_CLK_EN BIT(6) + +struct cpsw_phy_sel_priv { + struct device *dev; + u32 __iomem *gmii_sel; + bool rmii_clock_external; + void (*cpsw_phy_sel)(struct cpsw_phy_sel_priv *priv, + phy_interface_t phy_mode, int slave); +}; + + +static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv, + phy_interface_t phy_mode, int slave) +{ + u32 reg; + u32 mask; + u32 mode = 0; + + reg = readl(priv->gmii_sel); + + switch (phy_mode) { + case PHY_INTERFACE_MODE_RMII: + mode = AM33XX_GMII_SEL_MODE_RMII; + break; + + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + mode = AM33XX_GMII_SEL_MODE_RGMII; + break; + + case PHY_INTERFACE_MODE_MII: + default: + mode = AM33XX_GMII_SEL_MODE_MII; + break; + }; + + mask = 0x3 << (slave * 2) | BIT(slave + 6); + mode <<= slave * 2; + + if (priv->rmii_clock_external) { + if (slave == 0) + mode |= AM33XX_GMII_SEL_RMII1_IO_CLK_EN; + else + mode |= AM33XX_GMII_SEL_RMII2_IO_CLK_EN; + } + + reg &= ~mask; + reg |= mode; + + writel(reg, priv->gmii_sel); +} + +static struct platform_driver cpsw_phy_sel_driver; +static int match(struct device *dev, void *data) +{ + struct device_node *node = (struct device_node *)data; + return dev->of_node == node && + dev->driver == &cpsw_phy_sel_driver.driver; +} + +void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave) +{ + struct device_node *node; + struct cpsw_phy_sel_priv *priv; + + node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel"); + if (!node) { + dev_err(dev, "Phy mode driver DT not found\n"); + return; + } + + dev = bus_find_device(&platform_bus_type, NULL, node, match); + priv = dev_get_drvdata(dev); + + priv->cpsw_phy_sel(priv, phy_mode, slave); +} +EXPORT_SYMBOL_GPL(cpsw_phy_sel); + +static const struct of_device_id cpsw_phy_sel_id_table[] = { + { + .compatible = "ti,am3352-cpsw-phy-sel", + .data = &cpsw_gmii_sel_am3352, + }, + {} +}; +MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table); + +static int cpsw_phy_sel_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct of_device_id *of_id; + struct cpsw_phy_sel_priv *priv; + + of_id = of_match_node(cpsw_phy_sel_id_table, pdev->dev.of_node); + if (!of_id) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "unable to alloc memory for cpsw phy sel\n"); + return -ENOMEM; + } + + priv->cpsw_phy_sel = of_id->data; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gmii-sel"); + priv->gmii_sel = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->gmii_sel)) + return PTR_ERR(priv->gmii_sel); + + if (of_find_property(pdev->dev.of_node, "rmii-clock-ext", NULL)) + priv->rmii_clock_external = true; + + dev_set_drvdata(&pdev->dev, priv); + + return 0; +} + +static struct platform_driver cpsw_phy_sel_driver = { + .probe = cpsw_phy_sel_probe, + .driver = { + .name = "cpsw-phy-sel", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(cpsw_phy_sel_id_table), + }, +}; + +module_platform_driver(cpsw_phy_sel_driver); +MODULE_AUTHOR("Mugunthan V N <mugunthanvnm@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h index eb3e101ec048..574f49da693f 100644 --- a/drivers/net/ethernet/ti/cpsw.h +++ b/drivers/net/ethernet/ti/cpsw.h @@ -39,4 +39,6 @@ struct cpsw_platform_data { bool dual_emac; /* Enable Dual EMAC mode */ }; +void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave); + #endif /* __CPSW_H__ */ |