diff options
-rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 30 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 49 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_drv.h | 8 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_hdmi.c | 126 |
4 files changed, 160 insertions, 53 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 170e3861aa4e..38a7006a84f4 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -757,26 +757,34 @@ void intel_ddi_mode_set(struct drm_encoder *encoder, intel_hdmi->set_infoframes(encoder, adjusted_mode); } -void intel_ddi_dpms(struct drm_encoder *encoder, int mode) +void intel_enable_ddi(struct intel_encoder *encoder) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); int port = intel_hdmi->ddi_port; u32 temp; temp = I915_READ(DDI_BUF_CTL(port)); - - if (mode != DRM_MODE_DPMS_ON) { - temp &= ~DDI_BUF_CTL_ENABLE; - } else { - temp |= DDI_BUF_CTL_ENABLE; - } + temp |= DDI_BUF_CTL_ENABLE; /* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width, * and swing/emphasis values are ignored so nothing special needs * to be done besides enabling the port. */ - I915_WRITE(DDI_BUF_CTL(port), - temp); + I915_WRITE(DDI_BUF_CTL(port), temp); +} + +void intel_disable_ddi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + int port = intel_hdmi->ddi_port; + u32 temp; + + temp = I915_READ(DDI_BUF_CTL(port)); + temp &= ~DDI_BUF_CTL_ENABLE; + + I915_WRITE(DDI_BUF_CTL(port), temp); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 82aaded6713b..cbd356f43d35 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3554,6 +3554,17 @@ void intel_encoder_commit(struct drm_encoder *encoder) intel_cpt_verify_modeset(dev, intel_crtc->pipe); } +void intel_encoder_noop(struct drm_encoder *encoder) +{ +} + +void intel_encoder_disable(struct drm_encoder *encoder) +{ + struct intel_encoder *intel_encoder = to_intel_encoder(encoder); + + intel_encoder->disable(intel_encoder); +} + void intel_encoder_destroy(struct drm_encoder *encoder) { struct intel_encoder *intel_encoder = to_intel_encoder(encoder); @@ -3562,6 +3573,44 @@ void intel_encoder_destroy(struct drm_encoder *encoder) kfree(intel_encoder); } +/* Simple dpms helper for encodres with just one connector, no cloning and only + * one kind of off state. It clamps all !ON modes to fully OFF and changes the + * state of the entire output pipe. */ +void intel_encoder_dpms(struct intel_encoder *encoder, int mode) +{ + if (mode == DRM_MODE_DPMS_ON) { + encoder->connectors_active = true; + + intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_ON); + } else { + encoder->connectors_active = false; + + intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_OFF); + } +} + +/* Even simpler default implementation, if there's really no special case to + * consider. */ +void intel_connector_dpms(struct drm_connector *connector, int mode) +{ + struct intel_encoder *encoder = intel_attached_encoder(connector); + + /* All the simple cases only support two dpms states. */ + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; + + if (mode == connector->dpms) + return; + + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + if (encoder->base.crtc) + intel_encoder_dpms(encoder, mode); + else + encoder->connectors_active = false; +} + static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9a5adcc35bde..759dcbab0e5d 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -140,6 +140,7 @@ struct intel_encoder { * simple flag is enough to compute the possible_clones mask. */ bool cloneable; + bool connectors_active; void (*hot_plug)(struct intel_encoder *); void (*enable)(struct intel_encoder *); void (*disable)(struct intel_encoder *); @@ -412,7 +413,11 @@ extern enum drm_connector_status intel_panel_detect(struct drm_device *dev); extern void intel_crtc_load_lut(struct drm_crtc *crtc); extern void intel_encoder_prepare(struct drm_encoder *encoder); extern void intel_encoder_commit(struct drm_encoder *encoder); +extern void intel_encoder_noop(struct drm_encoder *encoder); +extern void intel_encoder_disable(struct drm_encoder *encoder); extern void intel_encoder_destroy(struct drm_encoder *encoder); +extern void intel_encoder_dpms(struct intel_encoder *encoder, int mode); +extern void intel_connector_dpms(struct drm_connector *, int mode); static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector) { @@ -519,7 +524,8 @@ extern void intel_disable_gt_powersave(struct drm_device *dev); extern void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv); extern void ironlake_teardown_rc6(struct drm_device *dev); -extern void intel_ddi_dpms(struct drm_encoder *encoder, int mode); +extern void intel_enable_ddi(struct intel_encoder *encoder); +extern void intel_disable_ddi(struct intel_encoder *encoder); extern void intel_ddi_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index e4c37bb572e8..acddaaa5f04c 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -601,11 +601,11 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, intel_hdmi->set_infoframes(encoder, adjusted_mode); } -static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) +static void intel_enable_hdmi(struct intel_encoder *encoder) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); u32 temp; u32 enable_bits = SDVO_ENABLE; @@ -617,31 +617,12 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) /* HW workaround for IBX, we need to move the port to transcoder A * before disabling it. */ if (HAS_PCH_IBX(dev)) { - struct drm_crtc *crtc = encoder->crtc; + struct drm_crtc *crtc = encoder->base.crtc; int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; - if (mode != DRM_MODE_DPMS_ON) { - if (temp & SDVO_PIPE_B_SELECT) { - temp &= ~SDVO_PIPE_B_SELECT; - I915_WRITE(intel_hdmi->sdvox_reg, temp); - POSTING_READ(intel_hdmi->sdvox_reg); - - /* Again we need to write this twice. */ - I915_WRITE(intel_hdmi->sdvox_reg, temp); - POSTING_READ(intel_hdmi->sdvox_reg); - - /* Transcoder selection bits only update - * effectively on vblank. */ - if (crtc) - intel_wait_for_vblank(dev, pipe); - else - msleep(50); - } - } else { - /* Restore the transcoder select bit. */ - if (pipe == PIPE_B) - enable_bits |= SDVO_PIPE_B_SELECT; - } + /* Restore the transcoder select bit. */ + if (pipe == PIPE_B) + enable_bits |= SDVO_PIPE_B_SELECT; } /* HW workaround, need to toggle enable bit off and on for 12bpc, but @@ -652,12 +633,67 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) POSTING_READ(intel_hdmi->sdvox_reg); } - if (mode != DRM_MODE_DPMS_ON) { - temp &= ~enable_bits; - } else { - temp |= enable_bits; + temp |= enable_bits; + + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + + /* HW workaround, need to write this twice for issue that may result + * in first write getting masked. + */ + if (HAS_PCH_SPLIT(dev)) { + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + } +} + +static void intel_disable_hdmi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + u32 temp; + u32 enable_bits = SDVO_ENABLE; + + if (intel_hdmi->has_audio) + enable_bits |= SDVO_AUDIO_ENABLE; + + temp = I915_READ(intel_hdmi->sdvox_reg); + + /* HW workaround for IBX, we need to move the port to transcoder A + * before disabling it. */ + if (HAS_PCH_IBX(dev)) { + struct drm_crtc *crtc = encoder->base.crtc; + int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; + + if (temp & SDVO_PIPE_B_SELECT) { + temp &= ~SDVO_PIPE_B_SELECT; + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + + /* Again we need to write this twice. */ + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + + /* Transcoder selection bits only update + * effectively on vblank. */ + if (crtc) + intel_wait_for_vblank(dev, pipe); + else + msleep(50); + } } + /* HW workaround, need to toggle enable bit off and on for 12bpc, but + * we do this anyway which shows more stable in testing. + */ + if (HAS_PCH_SPLIT(dev)) { + I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_ENABLE); + POSTING_READ(intel_hdmi->sdvox_reg); + } + + temp &= ~enable_bits; + I915_WRITE(intel_hdmi->sdvox_reg, temp); POSTING_READ(intel_hdmi->sdvox_reg); @@ -849,23 +885,23 @@ static void intel_hdmi_destroy(struct drm_connector *connector) } static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs_hsw = { - .dpms = intel_ddi_dpms, .mode_fixup = intel_hdmi_mode_fixup, - .prepare = intel_encoder_prepare, + .prepare = intel_encoder_noop, .mode_set = intel_ddi_mode_set, - .commit = intel_encoder_commit, + .commit = intel_encoder_noop, + .disable = intel_encoder_disable, }; static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = { - .dpms = intel_hdmi_dpms, .mode_fixup = intel_hdmi_mode_fixup, - .prepare = intel_encoder_prepare, + .prepare = intel_encoder_noop, .mode_set = intel_hdmi_mode_set, - .commit = intel_encoder_commit, + .commit = intel_encoder_noop, + .disable = intel_encoder_disable, }; static const struct drm_connector_funcs intel_hdmi_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_connector_dpms, .detect = intel_hdmi_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_hdmi_set_property, @@ -964,10 +1000,18 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg, enum port port) intel_hdmi->set_infoframes = cpt_set_infoframes; } - if (IS_HASWELL(dev)) - drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs_hsw); - else - drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs); + if (IS_HASWELL(dev)) { + intel_encoder->enable = intel_enable_ddi; + intel_encoder->disable = intel_disable_ddi; + drm_encoder_helper_add(&intel_encoder->base, + &intel_hdmi_helper_funcs_hsw); + } else { + intel_encoder->enable = intel_enable_hdmi; + intel_encoder->disable = intel_disable_hdmi; + drm_encoder_helper_add(&intel_encoder->base, + &intel_hdmi_helper_funcs); + } + intel_hdmi_add_properties(intel_hdmi, connector); |