diff options
-rw-r--r-- | drivers/ata/ahci.h | 14 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 97 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 29 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 12 | ||||
-rw-r--r-- | drivers/ata/libata.h | 2 | ||||
-rw-r--r-- | include/linux/ata.h | 9 | ||||
-rw-r--r-- | include/linux/libata.h | 4 |
7 files changed, 156 insertions, 11 deletions
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 57eb1c212a4c..6441cbecfa1d 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -115,6 +115,9 @@ enum { HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ + HOST_CAP2_SDS = (1 << 3), /* Support device sleep */ + HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */ + HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -133,6 +136,7 @@ enum { PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ PORT_FBS = 0x40, /* FIS-based Switching */ + PORT_DEVSLP = 0x44, /* device sleep */ /* PORT_IRQ_{STAT,MASK} bits */ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ @@ -186,6 +190,7 @@ enum { PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + /* PORT_FBS bits */ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ @@ -194,6 +199,15 @@ enum { PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ PORT_FBS_EN = (1 << 0), /* Enable FBS */ + /* PORT_DEVSLP bits */ + PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */ + PORT_DEVSLP_DM_MASK = (0xf << 25), /* DITO multiplier mask */ + PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */ + PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */ + PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */ + PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ + PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ + /* hpriv->flags bits */ #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 555c07afa05b..4201e535a8c8 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -45,6 +45,7 @@ #include <scsi/scsi_cmnd.h> #include <linux/libata.h> #include "ahci.h" +#include "libata.h" static int ahci_skip_host_reset; int ahci_ignore_sss; @@ -76,6 +77,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc); static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); static void ahci_freeze(struct ata_port *ap); static void ahci_thaw(struct ata_port *ap); +static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep); static void ahci_enable_fbs(struct ata_port *ap); static void ahci_disable_fbs(struct ata_port *ap); static void ahci_pmp_attach(struct ata_port *ap); @@ -193,6 +195,10 @@ module_param(ahci_em_messages, int, 0444); MODULE_PARM_DESC(ahci_em_messages, "AHCI Enclosure Management Message control (0 = off, 1 = on)"); +int devslp_idle_timeout = 1000; /* device sleep idle timeout in ms */ +module_param(devslp_idle_timeout, int, 0644); +MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout"); + static void ahci_enable_ahci(void __iomem *mmio) { int i; @@ -702,6 +708,16 @@ static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, } } + /* set aggressive device sleep */ + if ((hpriv->cap2 & HOST_CAP2_SDS) && + (hpriv->cap2 & HOST_CAP2_SADM) && + (link->device->flags & ATA_DFLAG_DEVSLP)) { + if (policy == ATA_LPM_MIN_POWER) + ahci_set_aggressive_devslp(ap, true); + else + ahci_set_aggressive_devslp(ap, false); + } + if (policy == ATA_LPM_MAX_POWER) { sata_link_scr_lpm(link, policy, false); @@ -1890,6 +1906,81 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) ahci_kick_engine(ap); } +static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_device *dev = ap->link.device; + u32 devslp, dm, dito, mdat, deto; + int rc; + unsigned int err_mask; + + devslp = readl(port_mmio + PORT_DEVSLP); + if (!(devslp & PORT_DEVSLP_DSP)) { + dev_err(ap->host->dev, "port does not support device sleep\n"); + return; + } + + /* disable device sleep */ + if (!sleep) { + if (devslp & PORT_DEVSLP_ADSE) { + writel(devslp & ~PORT_DEVSLP_ADSE, + port_mmio + PORT_DEVSLP); + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, + SATA_DEVSLP); + if (err_mask && err_mask != AC_ERR_DEV) + ata_dev_warn(dev, "failed to disable DEVSLP\n"); + } + return; + } + + /* device sleep was already enabled */ + if (devslp & PORT_DEVSLP_ADSE) + return; + + /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ + rc = ahci_stop_engine(ap); + if (rc) + return; + + dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET; + dito = devslp_idle_timeout / (dm + 1); + if (dito > 0x3ff) + dito = 0x3ff; + + /* Use the nominal value 10 ms if the read MDAT is zero, + * the nominal value of DETO is 20 ms. + */ + if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] & + ATA_LOG_DEVSLP_VALID_MASK) { + mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] & + ATA_LOG_DEVSLP_MDAT_MASK; + if (!mdat) + mdat = 10; + deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO]; + if (!deto) + deto = 20; + } else { + mdat = 10; + deto = 20; + } + + devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) | + (mdat << PORT_DEVSLP_MDAT_OFFSET) | + (deto << PORT_DEVSLP_DETO_OFFSET) | + PORT_DEVSLP_ADSE); + writel(devslp, port_mmio + PORT_DEVSLP); + + ahci_start_engine(ap); + + /* enable device sleep feature for the drive */ + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, + SATA_DEVSLP); + if (err_mask && err_mask != AC_ERR_DEV) + ata_dev_warn(dev, "failed to enable DEVSLP\n"); +} + static void ahci_enable_fbs(struct ata_port *ap) { struct ahci_port_priv *pp = ap->private_data; @@ -2164,7 +2255,8 @@ void ahci_print_info(struct ata_host *host, const char *scc_s) "flags: " "%s%s%s%s%s%s%s" "%s%s%s%s%s%s%s" - "%s%s%s%s%s%s\n" + "%s%s%s%s%s%s%s" + "%s%s\n" , cap & HOST_CAP_64 ? "64bit " : "", @@ -2184,6 +2276,9 @@ void ahci_print_info(struct ata_host *host, const char *scc_s) cap & HOST_CAP_CCC ? "ccc " : "", cap & HOST_CAP_EMS ? "ems " : "", cap & HOST_CAP_SXS ? "sxs " : "", + cap2 & HOST_CAP2_DESO ? "deso " : "", + cap2 & HOST_CAP2_SADM ? "sadm " : "", + cap2 & HOST_CAP2_SDS ? "sds " : "", cap2 & HOST_CAP2_APST ? "apst " : "", cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", cap2 & HOST_CAP2_BOH ? "boh " : "" diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5eee1c1537d2..25daf39368f6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2155,6 +2155,7 @@ int ata_dev_configure(struct ata_device *dev) int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; unsigned long xfer_mask; + unsigned int err_mask; char revbuf[7]; /* XYZ-99\0 */ char fwrevbuf[ATA_ID_FW_REV_LEN+1]; char modelbuf[ATA_ID_PROD_LEN+1]; @@ -2323,6 +2324,26 @@ int ata_dev_configure(struct ata_device *dev) } } + /* check and mark DevSlp capability */ + if (ata_id_has_devslp(dev->id)) + dev->flags |= ATA_DFLAG_DEVSLP; + + /* Obtain SATA Settings page from Identify Device Data Log, + * which contains DevSlp timing variables etc. + * Exclude old devices with ata_id_has_ncq() + */ + if (ata_id_has_ncq(dev->id)) { + err_mask = ata_read_log_page(dev, + ATA_LOG_SATA_ID_DEV_DATA, + ATA_LOG_SATA_SETTINGS, + dev->sata_settings, + 1); + if (err_mask) + ata_dev_dbg(dev, + "failed to get Identify Device Data, Emask 0x%x\n", + err_mask); + } + dev->cdb_len = 16; } @@ -2351,8 +2372,6 @@ int ata_dev_configure(struct ata_device *dev) (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && (!sata_pmp_attached(ap) || sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { - unsigned int err_mask; - /* issue SET feature command to turn this on */ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE, SATA_AN); @@ -3598,7 +3617,7 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, switch (policy) { case ATA_LPM_MAX_POWER: /* disable all LPM transitions */ - scontrol |= (0x3 << 8); + scontrol |= (0x7 << 8); /* initiate transition to active state */ if (spm_wakeup) { scontrol |= (0x4 << 12); @@ -3608,12 +3627,12 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, case ATA_LPM_MED_POWER: /* allow LPM to PARTIAL */ scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); + scontrol |= (0x6 << 8); break; case ATA_LPM_MIN_POWER: if (ata_link_nr_enabled(link) > 0) /* no restrictions on LPM transitions */ - scontrol &= ~(0x3 << 8); + scontrol &= ~(0x7 << 8); else { /* empty port, power off */ scontrol &= ~0xf; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7d4535e989bf..26598941e1b3 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1487,6 +1487,7 @@ static const char *ata_err_string(unsigned int err_mask) /** * ata_read_log_page - read a specific log page * @dev: target device + * @log: log to read * @page: page to read * @buf: buffer to store read page * @sectors: number of sectors to read @@ -1499,17 +1500,18 @@ static const char *ata_err_string(unsigned int err_mask) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_read_log_page(struct ata_device *dev, - u8 page, void *buf, unsigned int sectors) +unsigned int ata_read_log_page(struct ata_device *dev, u8 log, + u8 page, void *buf, unsigned int sectors) { struct ata_taskfile tf; unsigned int err_mask; - DPRINTK("read log page - page %d\n", page); + DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page); ata_tf_init(dev, &tf); tf.command = ATA_CMD_READ_LOG_EXT; - tf.lbal = page; + tf.lbal = log; + tf.lbam = page; tf.nsect = sectors; tf.hob_nsect = sectors >> 8; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; @@ -1545,7 +1547,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev, u8 csum; int i; - err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1); if (err_mask) return -EIO; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 50e4dff0604e..7148a58020b9 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -165,6 +165,8 @@ extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, unsigned int action); extern void ata_eh_done(struct ata_link *link, struct ata_device *dev, unsigned int action); +extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, + u8 page, void *buf, unsigned int sectors); extern void ata_eh_autopsy(struct ata_port *ap); const char *ata_get_cmd_descript(u8 command); extern void ata_eh_report(struct ata_port *ap); diff --git a/include/linux/ata.h b/include/linux/ata.h index 47a9dbf02159..408da9502177 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -295,6 +295,13 @@ enum { /* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, + ATA_LOG_SATA_ID_DEV_DATA = 0x30, + ATA_LOG_SATA_SETTINGS = 0x08, + ATA_LOG_DEVSLP_MDAT = 0x30, + ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, + ATA_LOG_DEVSLP_DETO = 0x31, + ATA_LOG_DEVSLP_VALID = 0x37, + ATA_LOG_DEVSLP_VALID_MASK = 0x80, /* READ/WRITE LONG (obsolete) */ ATA_CMD_READ_LONG = 0x22, @@ -348,6 +355,7 @@ enum { SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */ SATA_AN = 0x05, /* Asynchronous Notification */ SATA_SSP = 0x06, /* Software Settings Preservation */ + SATA_DEVSLP = 0x09, /* Device Sleep */ /* feature values for SET_MAX */ ATA_SET_MAX_ADDR = 0x00, @@ -584,6 +592,7 @@ static inline int ata_is_data(u8 prot) #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) #define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4)) +#define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8)) static inline bool ata_id_has_hipm(const u16 *id) { diff --git a/include/linux/libata.h b/include/linux/libata.h index 64f90e17e51d..464e67c2e77a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -162,6 +162,7 @@ enum { ATA_DFLAG_DETACHED = (1 << 25), ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ + ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -649,6 +650,9 @@ struct ata_device { u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; + /* Identify Device Data Log (30h), SATA Settings (page 08h) */ + u8 sata_settings[ATA_SECT_SIZE]; + /* error history */ int spdn_cnt; /* ering is CLEAR_END, read comment above CLEAR_END */ |