diff options
| -rw-r--r-- | drivers/ide/ide-tape.c | 56 |
1 files changed, 23 insertions, 33 deletions
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d8b02fb0284c..aed25590d058 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -498,20 +498,6 @@ enum { #define IDETAPE_ERROR_FILEMARK 102 #define IDETAPE_ERROR_EOD 103 -/* - * The following is used to format the general configuration word of - * the ATAPI IDENTIFY DEVICE command. - */ -struct idetape_id_gcw { - unsigned packet_size :2; /* Packet Size */ - unsigned reserved234 :3; /* Reserved */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned removable :1; /* Removable media */ - unsigned device_type :5; /* Device type */ - unsigned reserved13 :1; /* Reserved */ - unsigned protocol :2; /* Protocol type */ -}; - /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a @@ -3254,37 +3240,39 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) } /* - * idetape_identify_device is called to check the contents of the - * ATAPI IDENTIFY command results. We return: + * check the contents of the ATAPI IDENTIFY command results. We return: * - * 1 If the tape can be supported by us, based on the information - * we have so far. + * 1 - If the tape can be supported by us, based on the information we have so + * far. * - * 0 If this tape driver is not currently supported by us. + * 0 - If this tape driver is not currently supported by us. */ -static int idetape_identify_device (ide_drive_t *drive) +static int idetape_identify_device(ide_drive_t *drive) { - struct idetape_id_gcw gcw; - struct hd_driveid *id = drive->id; + u8 gcw[2], protocol, device_type, removable, packet_size; if (drive->id_read == 0) return 1; - *((unsigned short *) &gcw) = id->config; + *((unsigned short *) &gcw) = drive->id->config; - /* Check that we can support this device */ + protocol = (gcw[1] & 0xC0) >> 6; + device_type = gcw[1] & 0x1F; + removable = !!(gcw[0] & 0x80); + packet_size = gcw[0] & 0x3; - if (gcw.protocol != 2) + /* Check that we can support this device */ + if (protocol != 2) printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n", - gcw.protocol); - else if (gcw.device_type != 1) + protocol); + else if (device_type != 1) printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set " - "to tape\n", gcw.device_type); - else if (!gcw.removable) + "to tape\n", device_type); + else if (!removable) printk(KERN_ERR "ide-tape: The removable flag is not set\n"); - else if (gcw.packet_size != 0) { + else if (packet_size != 0) { printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 " - "bytes long\n", gcw.packet_size); + "bytes long\n", packet_size); } else return 1; return 0; @@ -3409,8 +3397,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) { unsigned long t1, tmid, tn, t; int speed; - struct idetape_id_gcw gcw; int stage_size; + u8 gcw[2]; struct sysinfo si; u16 *ctl = (u16 *)&tape->caps[12]; @@ -3433,7 +3421,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->max_insert_speed = 10000; tape->speed_control = 1; *((unsigned short *) &gcw) = drive->id->config; - if (gcw.drq_type == 1) + + /* Command packet DRQ type */ + if (((gcw[0] & 0x60) >> 5) == 1) set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags); tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10; |