diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 37 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nand-pxa3xx.h | 3 |
3 files changed, 42 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index bed83908edfe..86e0a5601ff5 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -15,6 +15,8 @@ Optional properties: - marvell,nand-keep-config: Set to keep the NAND controller config as set by the bootloader - num-cs: Number of chipselect lines to usw + - nand-on-flash-bbt: boolean to enable on flash bbt option if + not present false Example: diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index a30116bfff4d..84a6c649100c 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -26,6 +26,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_mtd.h> #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) #define ARCH_HAS_DMA @@ -241,6 +242,29 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = { { "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] }, }; +static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' }; +static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 8, + .len = 6, + .veroffs = 14, + .maxblocks = 8, /* Last 8 blocks in each chip */ + .pattern = bbt_pattern +}; + +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 8, + .len = 6, + .veroffs = 14, + .maxblocks = 8, /* Last 8 blocks in each chip */ + .pattern = bbt_mirror_pattern +}; + /* Define a default flash type setting serve as flash detecting only */ #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) @@ -1122,6 +1146,18 @@ KEEP_CONFIG: if (nand_scan_ident(mtd, 1, def)) return -ENODEV; + + if (pdata->flash_bbt) { + /* + * We'll use a bad block table stored in-flash and don't + * allow writing the bad block marker to the flash. + */ + chip->bbt_options |= NAND_BBT_USE_FLASH | + NAND_BBT_NO_OOB_BBM; + chip->bbt_td = &bbt_main_descr; + chip->bbt_md = &bbt_mirror_descr; + } + /* calculate addressing information */ if (mtd->writesize >= 2048) host->col_addr_cycles = 2; @@ -1316,6 +1352,7 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) if (of_get_property(np, "marvell,nand-keep-config", NULL)) pdata->keep_config = 1; of_property_read_u32(np, "num-cs", &pdata->num_cs); + pdata->flash_bbt = of_get_nand_on_flash_bbt(np); pdev->dev.platform_data = pdata; diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h index ffb801998e5d..a94147124929 100644 --- a/include/linux/platform_data/mtd-nand-pxa3xx.h +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -55,6 +55,9 @@ struct pxa3xx_nand_platform_data { /* indicate how many chip selects will be used */ int num_cs; + /* use an flash-based bad block table */ + bool flash_bbt; + const struct mtd_partition *parts[NUM_CHIP_SELECT]; unsigned int nr_parts[NUM_CHIP_SELECT]; |