aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c54
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c55
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c50
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h11
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c23
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.c6
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00reg.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c64
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c2
11 files changed, 201 insertions, 70 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 25e9dcf65c4e..116244b72371 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -879,7 +879,8 @@ static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_OFF);
+ int mask = (state == STATE_RADIO_IRQ_OFF) ||
+ (state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
/*
@@ -980,7 +981,9 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2400pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt2400pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -1235,23 +1238,10 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
}
}
-static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2400pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
-
- /*
- * Get the interrupt sources & saved to local variable.
- * Write register value back to clear pending interrupts.
- */
- rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
- rt2x00pci_register_write(rt2x00dev, CSR7, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
/*
* Handle interrupts, walk through all bits
@@ -1289,9 +1279,40 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
rt2400pci_txdone(rt2x00dev, QID_AC_BK);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
return IRQ_HANDLED;
}
+static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg;
+
+ /*
+ * Get the interrupt sources & saved to local variable.
+ * Write register value back to clear pending interrupts.
+ */
+ rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
+ rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalues for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -1581,6 +1602,7 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
.irq_handler = rt2400pci_interrupt,
+ .irq_handler_thread = rt2400pci_interrupt_thread,
.probe_hw = rt2400pci_probe_hw,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index faa804cf181a..5e80948d1a3e 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1033,7 +1033,8 @@ static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_OFF);
+ int mask = (state == STATE_RADIO_IRQ_OFF) ||
+ (state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
/*
@@ -1134,7 +1135,9 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt2500pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -1367,23 +1370,10 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
}
}
-static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2500pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
-
- /*
- * Get the interrupt sources & saved to local variable.
- * Write register value back to clear pending interrupts.
- */
- rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
- rt2x00pci_register_write(rt2x00dev, CSR7, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
/*
* Handle interrupts, walk through all bits
@@ -1421,9 +1411,41 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
rt2500pci_txdone(rt2x00dev, QID_AC_BK);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
+
return IRQ_HANDLED;
}
+static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg;
+
+ /*
+ * Get the interrupt sources & saved to local variable.
+ * Write register value back to clear pending interrupts.
+ */
+ rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
+ rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalues for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -1874,6 +1896,7 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
.irq_handler = rt2500pci_interrupt,
+ .irq_handler_thread = rt2500pci_interrupt_thread,
.probe_hw = rt2500pci_probe_hw,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 009323e6c20f..242d59558b79 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1004,7 +1004,9 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index a9eca99d416c..f21b77c61ad4 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -422,7 +422,8 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_ON);
+ int mask = (state == STATE_RADIO_IRQ_ON) ||
+ (state == STATE_RADIO_IRQ_ON_ISR);
u32 reg;
/*
@@ -631,7 +632,9 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt2800pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -929,20 +932,10 @@ static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
-
- /* Read status and ACK all interrupts */
- rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
- rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
/*
* 1 - Rx ring done interrupt.
@@ -962,9 +955,39 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
rt2800pci_wakeup(rt2x00dev);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
+
return IRQ_HANDLED;
}
+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg;
+
+ /* Read status and ACK all interrupts */
+ rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+ rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalue for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -1049,6 +1072,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler = rt2800pci_interrupt,
+ .irq_handler_thread = rt2800pci_interrupt_thread,
.probe_hw = rt2800pci_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800pci_check_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5aa7563155cd..df78e28526bf 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -406,7 +406,9 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 97b6261fee4f..0fa21410676f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -515,6 +515,11 @@ struct rt2x00lib_ops {
irq_handler_t irq_handler;
/*
+ * Threaded Interrupt handlers.
+ */
+ irq_handler_t irq_handler_thread;
+
+ /*
* Device init handlers.
*/
int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
@@ -871,6 +876,12 @@ struct rt2x00_dev {
const struct firmware *fw;
/*
+ * Interrupt values, stored between interrupt service routine
+ * and interrupt thread routine.
+ */
+ u32 irqvalue[2];
+
+ /*
* Driver specific data.
*/
void *priv;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 0906e14b347f..d3ebb4144562 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -340,9 +340,17 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* send the status report back.
*/
if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
- ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
+ /*
+ * Only PCI and SOC devices process the tx status in process
+ * context. Hence use ieee80211_tx_status for PCI and SOC
+ * devices and stick to ieee80211_tx_status_irqsafe for USB.
+ */
+ if (rt2x00_is_usb(rt2x00dev))
+ ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_tx_status(rt2x00dev->hw, entry->skb);
else
- dev_kfree_skb_irq(entry->skb);
+ dev_kfree_skb_any(entry->skb);
/*
* Make this entry available for reuse.
@@ -489,7 +497,16 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
*/
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
- ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
+
+ /*
+ * Currently only PCI and SOC devices handle rx interrupts in process
+ * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni
+ * for PCI and SOC devices.
+ */
+ if (rt2x00_is_usb(rt2x00dev))
+ ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
/*
* Replace the skb with the freshly allocated one.
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index fc9da8358784..19b262e1ddbe 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -153,8 +153,10 @@ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
/*
* Register interrupt handler.
*/
- status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
- IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+ status = request_threaded_irq(rt2x00dev->irq,
+ rt2x00dev->ops->lib->irq_handler,
+ rt2x00dev->ops->lib->irq_handler_thread,
+ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
if (status) {
ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
rt2x00dev->irq, status);
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index b9fe94873ee0..055501c355a5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -88,6 +88,8 @@ enum dev_state {
STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
+ STATE_RADIO_IRQ_ON_ISR,
+ STATE_RADIO_IRQ_OFF_ISR,
};
/*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index fe7bce7c05de..049433fa760d 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1622,7 +1622,8 @@ static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
- int mask = (state == STATE_RADIO_IRQ_OFF);
+ int mask = (state == STATE_RADIO_IRQ_OFF) ||
+ (state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
/*
@@ -1739,7 +1740,9 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt61pci_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
rt61pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
@@ -2147,27 +2150,11 @@ static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev)
rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt61pci_interrupt_thread(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg_mcu;
- u32 reg;
-
- /*
- * Get the interrupt sources & saved to local variable.
- * Write register value back to clear pending interrupts.
- */
- rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
- rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
-
- rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
- rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-
- if (!reg && !reg_mcu)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
+ u32 reg = rt2x00dev->irqvalue[0];
+ u32 reg_mcu = rt2x00dev->irqvalue[1];
/*
* Handle interrupts, walk through all bits
@@ -2206,9 +2193,45 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE))
rt2x00lib_beacondone(rt2x00dev);
+ /* Enable interrupts again. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_ON_ISR);
return IRQ_HANDLED;
}
+
+static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg_mcu;
+ u32 reg;
+
+ /*
+ * Get the interrupt sources & saved to local variable.
+ * Write register value back to clear pending interrupts.
+ */
+ rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
+ rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
+
+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+ if (!reg && !reg_mcu)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /* Store irqvalues for use in the interrupt thread. */
+ rt2x00dev->irqvalue[0] = reg;
+ rt2x00dev->irqvalue[1] = reg_mcu;
+
+ /* Disable interrupts, will be enabled again in the interrupt thread. */
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+ STATE_RADIO_IRQ_OFF_ISR);
+ return IRQ_WAKE_THREAD;
+}
+
/*
* Device probe functions.
*/
@@ -2795,6 +2818,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.irq_handler = rt61pci_interrupt,
+ .irq_handler_thread = rt61pci_interrupt_thread,
.probe_hw = rt61pci_probe_hw,
.get_firmware_name = rt61pci_get_firmware_name,
.check_firmware = rt61pci_check_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index cad07b69c53e..aa9de18fd410 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1400,7 +1400,9 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt73usb_toggle_rx(rt2x00dev, state);
break;
case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
+ case STATE_RADIO_IRQ_OFF_ISR:
/* No support, but no error either */
break;
case STATE_DEEP_SLEEP: