aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h8
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c245
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h27
4 files changed, 189 insertions, 93 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index fecbcd9a4259..0f42a5792ca0 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1187,7 +1187,13 @@ struct ath5k_hw {
u32 ah_txq_imr_cbrurn;
u32 ah_txq_imr_qtrig;
u32 ah_txq_imr_nofrm;
- u32 ah_txq_isr;
+
+ u32 ah_txq_isr_txok_all;
+ u32 ah_txq_isr_txurn;
+ u32 ah_txq_isr_qcborn;
+ u32 ah_txq_isr_qcburn;
+ u32 ah_txq_isr_qtrig;
+
u32 *ah_rf_banks;
size_t ah_rf_banks_size;
size_t ah_rf_regs_count;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index b346d0492001..c18d31008978 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1689,7 +1689,7 @@ ath5k_tasklet_tx(unsigned long data)
struct ath5k_hw *ah = (void *)data;
for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
- if (ah->txqs[i].setup && (ah->ah_txq_isr & BIT(i)))
+ if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i)))
ath5k_tx_processq(ah, &ah->txqs[i]);
ah->tx_pending = false;
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 2481f9c7f4b6..b5db6e78f88e 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -450,7 +450,6 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
*
* XXX: Link this with tx DMA size ?
* XXX: Use it to save interrupts ?
- * TODO: Needs testing, i think it's related to bmiss...
*/
int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
{
@@ -523,62 +522,161 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
* being mapped on some standard non hw-specific positions
* (check out &ath5k_int).
*
- * NOTE: We use read-and-clear register, so after this function is called ISR
- * is zeroed.
+ * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this
+ * function gets called are cleared on return.
*/
int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
{
- u32 data;
+ u32 data = 0;
/*
- * Read interrupt status from the Interrupt Status register
- * on 5210
+ * Read interrupt status from Primary Interrupt
+ * Register.
+ *
+ * Note: PISR/SISR Not available on 5210
*/
if (ah->ah_version == AR5K_AR5210) {
- data = ath5k_hw_reg_read(ah, AR5K_ISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
+ u32 isr = 0;
+ isr = ath5k_hw_reg_read(ah, AR5K_ISR);
+ if (unlikely(isr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = isr;
return -ENODEV;
}
- } else {
+
/*
- * Read interrupt status from Interrupt
- * Status Register shadow copy (Read And Clear)
- *
- * Note: PISR/SISR Not available on 5210
+ * Filter out the non-common bits from the interrupt
+ * status.
*/
- data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
+ *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr;
+
+ /* Hanlde INT_FATAL */
+ if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
+ | AR5K_ISR_DPERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successful assoc + some jiffies.
+ interrupt_mask &= ~AR5K_INT_BMISS;
+ */
+
+ data = isr;
+ } else {
+ u32 pisr = 0;
+ u32 pisr_clear = 0;
+ u32 sisr0 = 0;
+ u32 sisr1 = 0;
+ u32 sisr2 = 0;
+ u32 sisr3 = 0;
+ u32 sisr4 = 0;
+
+ /* Read PISR and SISRs... */
+ pisr = ath5k_hw_reg_read(ah, AR5K_PISR);
+ if (unlikely(pisr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = pisr;
return -ENODEV;
}
- }
- /*
- * Get abstract interrupt mask (driver-compatible)
- */
- *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+ sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0);
+ sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1);
+ sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2);
+ sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3);
+ sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4);
- if (ah->ah_version != AR5K_AR5210) {
- u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2);
+ /*
+ * PISR holds the logical OR of interrupt bits
+ * from SISR registers:
+ *
+ * TXOK and TXDESC -> Logical OR of TXOK and TXDESC
+ * per-queue bits on SISR0
+ *
+ * TXERR and TXEOL -> Logical OR of TXERR and TXEOL
+ * per-queue bits on SISR1
+ *
+ * TXURN -> Logical OR of TXURN per-queue bits on SISR2
+ *
+ * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2
+ *
+ * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC
+ * BCN_TIMEOUT, CAB_TIMEOUT and DTIM
+ * (and TSFOOR ?) bits on SISR2
+ *
+ * QCBRORN and QCBRURN -> Logical OR of QCBRORN and
+ * QCBRURN per-queue bits on SISR3
+ * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4
+ *
+ * If we clean these bits on PISR we 'll also clear all
+ * related bits from SISRs, e.g. if we write the TXOK bit on
+ * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK
+ * interrupt got fired for another queue while we were reading
+ * the interrupt registers and we write back the TXOK bit on
+ * PISR we 'll lose it. So make sure that we don't write back
+ * on PISR any bits that come from SISRs. Clearing them from
+ * SISRs will also clear PISR so no need to worry here.
+ */
- /*HIU = Host Interface Unit (PCI etc)*/
- if (unlikely(data & (AR5K_ISR_HIUERR)))
- *interrupt_mask |= AR5K_INT_FATAL;
+ pisr_clear = pisr & ~AR5K_ISR_BITS_FROM_SISRS;
- /*Beacon Not Ready*/
- if (unlikely(data & (AR5K_ISR_BNR)))
- *interrupt_mask |= AR5K_INT_BNR;
+ /*
+ * Write to clear them...
+ * Note: This means that each bit we write back
+ * to the registers will get cleared, leaving the
+ * rest unaffected. So this won't affect new interrupts
+ * we didn't catch while reading/processing, we 'll get
+ * them next time get_isr gets called.
+ */
+ ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0);
+ ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1);
+ ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2);
+ ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3);
+ ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4);
+ ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR);
+ /* Flush previous write */
+ ath5k_hw_reg_read(ah, AR5K_PISR);
- if (unlikely(sisr2 & (AR5K_SISR2_SSERR |
- AR5K_SISR2_DPERR |
- AR5K_SISR2_MCABT)))
- *interrupt_mask |= AR5K_INT_FATAL;
+ /*
+ * Filter out the non-common bits from the interrupt
+ * status.
+ */
+ *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr;
+
+
+ /* We treat TXOK,TXDESC, TXERR and TXEOL
+ * the same way (schedule the tx tasklet)
+ * so we track them all together per queue */
+ if (pisr & AR5K_ISR_TXOK)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXOK);
+
+ if (pisr & AR5K_ISR_TXDESC)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXDESC);
- if (data & AR5K_ISR_TIM)
+ if (pisr & AR5K_ISR_TXERR)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXERR);
+
+ if (pisr & AR5K_ISR_TXEOL)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXEOL);
+
+ /* Currently this is not much usefull since we treat
+ * all queues the same way if we get a TXURN (update
+ * tx trigger level) but we might need it later on*/
+ if (pisr & AR5K_ISR_TXURN)
+ ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2,
+ AR5K_SISR2_QCU_TXURN);
+
+ /* Misc Beacon related interrupts */
+
+ /* For AR5211 */
+ if (pisr & AR5K_ISR_TIM)
*interrupt_mask |= AR5K_INT_TIM;
- if (data & AR5K_ISR_BCNMISC) {
+ /* For AR5212+ */
+ if (pisr & AR5K_ISR_BCNMISC) {
if (sisr2 & AR5K_SISR2_TIM)
*interrupt_mask |= AR5K_INT_TIM;
if (sisr2 & AR5K_SISR2_DTIM)
@@ -591,63 +689,40 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
*interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
}
- if (data & AR5K_ISR_RXDOPPLER)
+ /* Below interrupts are unlikely to happen */
+
+ /* HIU = Host Interface Unit (PCI etc)
+ * Can be one of MCABT, SSERR, DPERR from SISR2 */
+ if (unlikely(pisr & (AR5K_ISR_HIUERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+
+ /*Beacon Not Ready*/
+ if (unlikely(pisr & (AR5K_ISR_BNR)))
+ *interrupt_mask |= AR5K_INT_BNR;
+
+ if (unlikely(pisr & (AR5K_ISR_RXDOPPLER)))
*interrupt_mask |= AR5K_INT_RX_DOPPLER;
- if (data & AR5K_ISR_QCBRORN) {
+
+ if (unlikely(pisr & (AR5K_ISR_QCBRORN))) {
*interrupt_mask |= AR5K_INT_QCBRORN;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
- AR5K_SISR3_QCBRORN);
+ ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3,
+ AR5K_SISR3_QCBRORN);
}
- if (data & AR5K_ISR_QCBRURN) {
+
+ if (unlikely(pisr & (AR5K_ISR_QCBRURN))) {
*interrupt_mask |= AR5K_INT_QCBRURN;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
- AR5K_SISR3_QCBRURN);
+ ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3,
+ AR5K_SISR3_QCBRURN);
}
- if (data & AR5K_ISR_QTRIG) {
+
+ if (unlikely(pisr & (AR5K_ISR_QTRIG))) {
*interrupt_mask |= AR5K_INT_QTRIG;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR4),
- AR5K_SISR4_QTRIG);
+ ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4,
+ AR5K_SISR4_QTRIG);
}
- if (data & AR5K_ISR_TXOK)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
- AR5K_SISR0_QCU_TXOK);
-
- if (data & AR5K_ISR_TXDESC)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
- AR5K_SISR0_QCU_TXDESC);
-
- if (data & AR5K_ISR_TXERR)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
- AR5K_SISR1_QCU_TXERR);
-
- if (data & AR5K_ISR_TXEOL)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
- AR5K_SISR1_QCU_TXEOL);
-
- if (data & AR5K_ISR_TXURN)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR2),
- AR5K_SISR2_QCU_TXURN);
- } else {
- if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
- | AR5K_ISR_HIUERR | AR5K_ISR_DPERR)))
- *interrupt_mask |= AR5K_INT_FATAL;
-
- /*
- * XXX: BMISS interrupts may occur after association.
- * I found this on 5210 code but it needs testing. If this is
- * true we should disable them before assoc and re-enable them
- * after a successful assoc + some jiffies.
- interrupt_mask &= ~AR5K_INT_BMISS;
- */
+ data = pisr;
}
/*
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index f5c1000045d3..0ea1608b47fd 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -280,6 +280,10 @@
* 5211/5212 we have one primary and 4 secondary registers.
* So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
* Most of these bits are common for all chipsets.
+ *
+ * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain
+ * the logical OR from per-queue interrupt bits found on SISR registers
+ * (see below).
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
@@ -292,7 +296,10 @@
#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
-#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */
+#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)
+ * NOTE: We don't have per-queue info for this
+ * one, but we can enable it per-queue through
+ * TXNOFRM_QCU field on TXNOFRM register */
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
@@ -302,21 +309,29 @@
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
-#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
+#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+]
+ * 'or' of MCABT, SSERR, DPERR from SISR2 */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
-#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */
#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
-#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
- CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt
+ * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
+#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\
+ AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\
+ AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\
+ AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\
+ AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG)
+
/*
* Secondary status registers [5211+] (0 - 4)
*
@@ -347,7 +362,7 @@
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
-#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 21:05:59 +0000