diff options
| -rw-r--r-- | Documentation/fb/ep93xx-fb.txt | 135 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/video/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/ep93xx-fb.c | 646 |
4 files changed, 793 insertions, 0 deletions
diff --git a/Documentation/fb/ep93xx-fb.txt b/Documentation/fb/ep93xx-fb.txt new file mode 100644 index 000000000000..5af1bd9effae --- /dev/null +++ b/Documentation/fb/ep93xx-fb.txt @@ -0,0 +1,135 @@ +================================ +Driver for EP93xx LCD controller +================================ + +The EP93xx LCD controller can drive both standard desktop monitors and +embedded LCD displays. If you have a standard desktop monitor then you +can use the standard Linux video mode database. In your board file: + + static struct ep93xxfb_mach_info some_board_fb_info = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, + }; + +If you have an embedded LCD display then you need to define a video +mode for it as follows: + + static struct fb_videomode some_board_video_modes[] = { + { + .name = "some_lcd_name", + /* Pixel clock, porches, etc */ + }, + }; + +Note that the pixel clock value is in pico-seconds. You can use the +KHZ2PICOS macro to convert the pixel clock value. Most other values +are in pixel clocks. See Documentation/fb/framebuffer.txt for further +details. + +The ep93xxfb_mach_info structure for your board should look like the +following: + + static struct ep93xxfb_mach_info some_board_fb_info = { + .num_modes = ARRAY_SIZE(some_board_video_modes), + .modes = some_board_video_modes, + .default_mode = &some_board_video_modes[0], + .bpp = 16, + }; + +The framebuffer device can be registered by adding the following to +your board initialisation function: + + ep93xx_register_fb(&some_board_fb_info); + +===================== +Video Attribute Flags +===================== + +The ep93xxfb_mach_info structure has a flags field which can be used +to configure the controller. The video attributes flags are fully +documented in section 7 of the EP93xx users' guide. The following +flags are available: + +EP93XXFB_PCLK_FALLING Clock data on the falling edge of the + pixel clock. The default is to clock + data on the rising edge. + +EP93XXFB_SYNC_BLANK_HIGH Blank signal is active high. By + default the blank signal is active low. + +EP93XXFB_SYNC_HORIZ_HIGH Horizontal sync is active high. By + default the horizontal sync is active low. + +EP93XXFB_SYNC_VERT_HIGH Vertical sync is active high. By + default the vertical sync is active high. + +The physical address of the framebuffer can be controlled using the +following flags: + +EP93XXFB_USE_SDCSN0 Use SDCSn[0] for the framebuffer. This + is the default setting. + +EP93XXFB_USE_SDCSN1 Use SDCSn[1] for the framebuffer. + +EP93XXFB_USE_SDCSN2 Use SDCSn[2] for the framebuffer. + +EP93XXFB_USE_SDCSN3 Use SDCSn[3] for the framebuffer. + +================== +Platform callbacks +================== + +The EP93xx framebuffer driver supports three optional platform +callbacks: setup, teardown and blank. The setup and teardown functions +are called when the framebuffer driver is installed and removed +respectively. The blank function is called whenever the display is +blanked or unblanked. + +The setup and teardown devices pass the platform_device structure as +an argument. The fb_info and ep93xxfb_mach_info structures can be +obtained as follows: + + static int some_board_fb_setup(struct platform_device *pdev) + { + struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data; + struct fb_info *fb_info = platform_get_drvdata(pdev); + + /* Board specific framebuffer setup */ + } + +====================== +Setting the video mode +====================== + +The video mode is set using the following syntax: + + video=XRESxYRES[-BPP][@REFRESH] + +If the EP93xx video driver is built-in then the video mode is set on +the Linux kernel command line, for example: + + video=ep93xx-fb:800x600-16@60 + +If the EP93xx video driver is built as a module then the video mode is +set when the module is installed: + + modprobe ep93xx-fb video=320x240 + +============== +Screenpage bug +============== + +At least on the EP9315 there is a silicon bug which causes bit 27 of +the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is +an unofficial errata for this bug at: + http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 + +By default the EP93xx framebuffer driver checks if the allocated physical +address has bit 27 set. If it does, then the memory is freed and an +error is returned. The check can be disabled by adding the following +option when loading the driver: + + ep93xx-fb.check_screenpage_bug=0 + +In some cases it may be possible to reconfigure your SDRAM layout to +avoid this bug. See section 13 of the EP93xx users' guide for details. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index a7944ef48a2a..7be506262284 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2128,6 +2128,17 @@ config FB_MB862XX_LIME ---help--- Framebuffer support for Fujitsu Lime GDC on host CPU bus. +config FB_EP93XX + tristate "EP93XX frame buffer support" + depends on FB && ARCH_EP93XX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Framebuffer driver for the Cirrus Logic EP93XX series of processors. + This driver is also available as a module. The module will be called + ep93xx-fb. + config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" depends on FB_MB862XX_LIME diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 85b2d2322dc7..80232e124889 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_FB_Q40) += q40fb.o obj-$(CONFIG_FB_TGA) += tgafb.o obj-$(CONFIG_FB_HP300) += hpfb.o obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_HIT) += hitfb.o obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c new file mode 100644 index 000000000000..bd9d46f95291 --- /dev/null +++ b/drivers/video/ep93xx-fb.c @@ -0,0 +1,646 @@ +/* + * linux/drivers/video/ep93xx-fb.c + * + * Framebuffer support for the EP93xx series. + * + * Copyright (C) 2007 Bluewater Systems Ltd + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * Copyright (c) 2009 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * Based on the Cirrus Logic ep93xxfb driver, and various other ep93xxfb + * drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/fb.h> + +#include <mach/fb.h> + +/* Vertical Frame Timing Registers */ +#define EP93XXFB_VLINES_TOTAL 0x0000 /* SW locked */ +#define EP93XXFB_VSYNC 0x0004 /* SW locked */ +#define EP93XXFB_VACTIVE 0x0008 /* SW locked */ +#define EP93XXFB_VBLANK 0x0228 /* SW locked */ +#define EP93XXFB_VCLK 0x000c /* SW locked */ + +/* Horizontal Frame Timing Registers */ +#define EP93XXFB_HCLKS_TOTAL 0x0010 /* SW locked */ +#define EP93XXFB_HSYNC 0x0014 /* SW locked */ +#define EP93XXFB_HACTIVE 0x0018 /* SW locked */ +#define EP93XXFB_HBLANK 0x022c /* SW locked */ +#define EP93XXFB_HCLK 0x001c /* SW locked */ + +/* Frame Buffer Memory Configuration Registers */ +#define EP93XXFB_SCREEN_PAGE 0x0028 +#define EP93XXFB_SCREEN_HPAGE 0x002c +#define EP93XXFB_SCREEN_LINES 0x0030 +#define EP93XXFB_LINE_LENGTH 0x0034 +#define EP93XXFB_VLINE_STEP 0x0038 +#define EP93XXFB_LINE_CARRY 0x003c /* SW locked */ +#define EP93XXFB_EOL_OFFSET 0x0230 + +/* Other Video Registers */ +#define EP93XXFB_BRIGHTNESS 0x0020 +#define EP93XXFB_ATTRIBS 0x0024 /* SW locked */ +#define EP93XXFB_SWLOCK 0x007c /* SW locked */ +#define EP93XXFB_AC_RATE 0x0214 +#define EP93XXFB_FIFO_LEVEL 0x0234 +#define EP93XXFB_PIXELMODE 0x0054 +#define EP93XXFB_PIXELMODE_32BPP (0x7 << 0) +#define EP93XXFB_PIXELMODE_24BPP (0x6 << 0) +#define EP93XXFB_PIXELMODE_16BPP (0x4 << 0) +#define EP93XXFB_PIXELMODE_8BPP (0x2 << 0) +#define EP93XXFB_PIXELMODE_SHIFT_1P_24B (0x0 << 3) +#define EP93XXFB_PIXELMODE_SHIFT_1P_18B (0x1 << 3) +#define EP93XXFB_PIXELMODE_COLOR_LUT (0x0 << 10) +#define EP93XXFB_PIXELMODE_COLOR_888 (0x4 << 10) +#define EP93XXFB_PIXELMODE_COLOR_555 (0x5 << 10) +#define EP93XXFB_PARL_IF_OUT 0x0058 +#define EP93XXFB_PARL_IF_IN 0x005c + +/* Blink Control Registers */ +#define EP93XXFB_BLINK_RATE 0x0040 +#define EP93XXFB_BLINK_MASK 0x0044 +#define EP93XXFB_BLINK_PATTRN 0x0048 +#define EP93XXFB_PATTRN_MASK 0x004c +#define EP93XXFB_BKGRND_OFFSET 0x0050 + +/* Hardware Cursor Registers */ +#define EP93XXFB_CURSOR_ADR_START 0x0060 +#define EP93XXFB_CURSOR_ADR_RESET 0x0064 +#define EP93XXFB_CURSOR_SIZE 0x0068 +#define EP93XXFB_CURSOR_COLOR1 0x006c +#define EP93XXFB_CURSOR_COLOR2 0x0070 +#define EP93XXFB_CURSOR_BLINK_COLOR1 0x021c +#define EP93XXFB_CURSOR_BLINK_COLOR2 0x0220 +#define EP93XXFB_CURSOR_XY_LOC 0x0074 +#define EP93XXFB_CURSOR_DSCAN_HY_LOC 0x0078 +#define EP93XXFB_CURSOR_BLINK_RATE_CTRL 0x0224 + +/* LUT Registers */ +#define EP93XXFB_GRY_SCL_LUTR 0x0080 +#define EP93XXFB_GRY_SCL_LUTG 0x0280 +#define EP93XXFB_GRY_SCL_LUTB 0x0300 +#define EP93XXFB_LUT_SW_CONTROL 0x0218 +#define EP93XXFB_LUT_SW_CONTROL_SWTCH (1 << 0) +#define EP93XXFB_LUT_SW_CONTROL_SSTAT (1 << 1) +#define EP93XXFB_COLOR_LUT 0x0400 + +/* Video Signature Registers */ +#define EP93XXFB_VID_SIG_RSLT_VAL 0x0200 +#define EP93XXFB_VID_SIG_CTRL 0x0204 +#define EP93XXFB_VSIG 0x0208 +#define EP93XXFB_HSIG 0x020c +#define EP93XXFB_SIG_CLR_STR 0x0210 + +/* Minimum / Maximum resolutions supported */ +#define EP93XXFB_MIN_XRES 64 +#define EP93XXFB_MIN_YRES 64 +#define EP93XXFB_MAX_XRES 1024 +#define EP93XXFB_MAX_YRES 768 + +struct ep93xx_fbi { + struct ep93xxfb_mach_info *mach_info; + struct clk *clk; + struct resource *res; + void __iomem *mmio_base; + unsigned int pseudo_palette[256]; +}; + +static int check_screenpage_bug = 1; +module_param(check_screenpage_bug, int, 0644); +MODULE_PARM_DESC(check_screenpage_bug, + "Check for bit 27 screen page bug. Default = 1"); + +static inline unsigned int ep93xxfb_readl(struct ep93xx_fbi *fbi, + unsigned int off) +{ + return __raw_readl(fbi->mmio_base + off); +} + +static inline void ep93xxfb_writel(struct ep93xx_fbi *fbi, + unsigned int val, unsigned int off) +{ + __raw_writel(val, fbi->mmio_base + off); +} + +/* + * Write to one of the locked raster registers. + */ +static inline void ep93xxfb_out_locked(struct ep93xx_fbi *fbi, + unsigned int val, unsigned int reg) +{ + /* + * We don't need a lock or delay here since the raster register + * block will remain unlocked until the next access. + */ + ep93xxfb_writel(fbi, 0xaa, EP93XXFB_SWLOCK); + ep93xxfb_writel(fbi, val, reg); +} + +static void ep93xxfb_set_video_attribs(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int attribs; + + attribs = EP93XXFB_ENABLE; + attribs |= fbi->mach_info->flags; + ep93xxfb_out_locked(fbi, attribs, EP93XXFB_ATTRIBS); +} + +static int ep93xxfb_set_pixelmode(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int val; + + info->var.transp.offset = 0; + info->var.transp.length = 0; + + switch (info->var.bits_per_pixel) { + case 8: + val = EP93XXFB_PIXELMODE_8BPP | EP93XXFB_PIXELMODE_COLOR_LUT | + EP93XXFB_PIXELMODE_SHIFT_1P_18B; + + info->var.red.offset = 0; + info->var.red.length = 8; + info->var.green.offset = 0; + info->var.green.length = 8; + info->var.blue.offset = 0; + info->var.blue.length = 8; + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + + case 16: + val = EP93XXFB_PIXELMODE_16BPP | EP93XXFB_PIXELMODE_COLOR_555 | + EP93XXFB_PIXELMODE_SHIFT_1P_18B; + + info->var.red.offset = 11; + info->var.red.length = 5; + info->var.green.offset = 5; + info->var.green.length = 6; + info->var.blue.offset = 0; + info->var.blue.length = 5; + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + + case 24: + val = EP93XXFB_PIXELMODE_24BPP | EP93XXFB_PIXELMODE_COLOR_888 | + EP93XXFB_PIXELMODE_SHIFT_1P_24B; + + info->var.red.offset = 16; + info->var.red.length = 8; + info->var.green.offset = 8; + info->var.green.length = 8; + info->var.blue.offset = 0; + info->var.blue.length = 8; + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + + case 32: + val = EP93XXFB_PIXELMODE_32BPP | EP93XXFB_PIXELMODE_COLOR_888 | + EP93XXFB_PIXELMODE_SHIFT_1P_24B; + + info->var.red.offset = 16; + info->var.red.length = 8; + info->var.green.offset = 8; + info->var.green.length = 8; + info->var.blue.offset = 0; + info->var.blue.length = 8; + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + + default: + return -EINVAL; + } + + ep93xxfb_writel(fbi, val, EP93XXFB_PIXELMODE); + return 0; +} + +static void ep93xxfb_set_timing(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int vlines_total, hclks_total, start, stop; + + vlines_total = info->var.yres + info->var.upper_margin + + info->var.lower_margin + info->var.vsync_len - 1; + + hclks_total = info->var.xres + info->var.left_margin + + info->var.right_margin + info->var.hsync_len - 1; + + ep93xxfb_out_locked(fbi, vlines_total, EP93XXFB_VLINES_TOTAL); + ep93xxfb_out_locked(fbi, hclks_total, EP93XXFB_HCLKS_TOTAL); + + start = vlines_total; + stop = vlines_total - info->var.vsync_len; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VSYNC); + + start = vlines_total - info->var.vsync_len - info->var.upper_margin; + stop = info->var.lower_margin - 1; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VBLANK); + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VACTIVE); + + start = vlines_total; + stop = vlines_total + 1; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VCLK); + + start = hclks_total; + stop = hclks_total - info->var.hsync_len; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HSYNC); + + start = hclks_total - info->var.hsync_len - info->var.left_margin; + stop = info->var.right_margin - 1; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HBLANK); + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HACTIVE); + + start = hclks_total; + stop = hclks_total; + ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HCLK); + + ep93xxfb_out_locked(fbi, 0x0, EP93XXFB_LINE_CARRY); +} + +static int ep93xxfb_set_par(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + + clk_set_rate(fbi->clk, 1000 * PICOS2KHZ(info->var.pixclock)); + + ep93xxfb_set_timing(info); + + info->fix.line_length = info->var.xres_virtual * + info->var.bits_per_pixel / 8; + + ep93xxfb_writel(fbi, info->fix.smem_start, EP93XXFB_SCREEN_PAGE); + ep93xxfb_writel(fbi, info->var.yres - 1, EP93XXFB_SCREEN_LINES); + ep93xxfb_writel(fbi, ((info->var.xres * info->var.bits_per_pixel) + / 32) - 1, EP93XXFB_LINE_LENGTH); + ep93xxfb_writel(fbi, info->fix.line_length / 4, EP93XXFB_VLINE_STEP); + ep93xxfb_set_video_attribs(info); + return 0; +} + +static int ep93xxfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + int err; + + err = ep93xxfb_set_pixelmode(info); + if (err) + return err; + + var->xres = max_t(unsigned int, var->xres, EP93XXFB_MIN_XRES); + var->xres = min_t(unsigned int, var->xres, EP93XXFB_MAX_XRES); + var->xres_virtual = max(var->xres_virtual, var->xres); + + var->yres = max_t(unsigned int, var->yres, EP93XXFB_MIN_YRES); + var->yres = min_t(unsigned int, var->yres, EP93XXFB_MAX_YRES); + var->yres_virtual = max(var->yres_virtual, var->yres); + + return 0; +} + +static int ep93xxfb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + unsigned int offset = vma->vm_pgoff << PAGE_SHIFT; + + if (offset < info->fix.smem_len) { + return dma_mmap_writecombine(info->dev, vma, info->screen_base, + info->fix.smem_start, + info->fix.smem_len); + } + + return -EINVAL; +} + +static int ep93xxfb_blank(int blank_mode, struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int attribs = ep93xxfb_readl(fbi, EP93XXFB_ATTRIBS); + + if (blank_mode) { + if (fbi->mach_info->blank) + fbi->mach_info->blank(blank_mode, info); + ep93xxfb_out_locked(fbi, attribs & ~EP93XXFB_ENABLE, + EP93XXFB_ATTRIBS); + clk_disable(fbi->clk); + } else { + clk_enable(fbi->clk); + ep93xxfb_out_locked(fbi, attribs | EP93XXFB_ENABLE, + EP93XXFB_ATTRIBS); + if (fbi->mach_info->blank) + fbi->mach_info->blank(blank_mode, info); + } + + return 0; +} + +static inline int ep93xxfb_convert_color(int val, int width) +{ + return ((val << width) + 0x7fff - val) >> 16; +} + +static int ep93xxfb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + unsigned int *pal = info->pseudo_palette; + unsigned int ctrl, i, rgb, lut_current, lut_stat; + + switch (info->fix.visual) { + case FB_VISUAL_PSEUDOCOLOR: + rgb = ((red & 0xff00) << 8) | (green & 0xff00) | + ((blue & 0xff00) >> 8); + + pal[regno] = rgb; + ep93xxfb_writel(fbi, rgb, (EP93XXFB_COLOR_LUT + (regno << 2))); + ctrl = ep93xxfb_readl(fbi, EP93XXFB_LUT_SW_CONTROL); + lut_stat = !!(ctrl & EP93XXFB_LUT_SW_CONTROL_SSTAT); + lut_current = !!(ctrl & EP93XXFB_LUT_SW_CONTROL_SWTCH); + + if (lut_stat == lut_current) { + for (i = 0; i < 256; i++) { + ep93xxfb_writel(fbi, pal[i], + EP93XXFB_COLOR_LUT + (i << 2)); + } + + ep93xxfb_writel(fbi, + ctrl ^ EP93XXFB_LUT_SW_CONTROL_SWTCH, + EP93XXFB_LUT_SW_CONTROL); + } + break; + + case FB_VISUAL_TRUECOLOR: + if (regno > 16) + return 1; + + red = ep93xxfb_convert_color(red, info->var.red.length); + green = ep93xxfb_convert_color(green, info->var.green.length); + blue = ep93xxfb_convert_color(blue, info->var.blue.length); + transp = ep93xxfb_convert_color(transp, + info->var.transp.length); + + pal[regno] = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset) | + (transp << info->var.transp.offset); + break; + + default: + return 1; + } + + return 0; +} + +static struct fb_ops ep93xxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = ep93xxfb_check_var, + .fb_set_par = ep93xxfb_set_par, + .fb_blank = ep93xxfb_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_setcolreg = ep93xxfb_setcolreg, + .fb_mmap = ep93xxfb_mmap, +}; + +static int __init ep93xxfb_calc_fbsize(struct ep93xxfb_mach_info *mach_info) +{ + int i, fb_size = 0; + + if (mach_info->num_modes == EP93XXFB_USE_MODEDB) { + fb_size = EP93XXFB_MAX_XRES * EP93XXFB_MAX_YRES * + mach_info->bpp / 8; + } else { + for (i = 0; i < mach_info->num_modes; i++) { + const struct fb_videomode *mode; + int size; + + mode = &mach_info->modes[i]; + size = mode->xres * mode->yres * mach_info->bpp / 8; + if (size > fb_size) + fb_size = size; + } + } + + return fb_size; +} + +static int __init ep93xxfb_alloc_videomem(struct fb_info *info) +{ + struct ep93xx_fbi *fbi = info->par; + char __iomem *virt_addr; + dma_addr_t phys_addr; + unsigned int fb_size; + + fb_size = ep93xxfb_calc_fbsize(fbi->mach_info); + virt_addr = dma_alloc_writecombine(info->dev, fb_size, + &phys_addr, GFP_KERNEL); + if (!virt_addr) + return -ENOMEM; + + /* + * There is a bug in the ep93xx framebuffer which causes problems + * if bit 27 of the physical address is set. + * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2 + * There does not seem to be any offical errata for this, but I + * have confirmed the problem exists on my hardware (ep9315) at + * least. + */ + if (check_screenpage_bug && phys_addr & (1 << 27)) { + dev_err(info->dev, "ep93xx framebuffer bug. phys addr (0x%x) " + "has bit 27 set: cannot init framebuffer\n", + phys_addr); + + dma_free_coherent(info->dev, fb_size, virt_addr, phys_addr); + return -ENOMEM; + } + + info->fix.smem_start = phys_addr; + info->fix.smem_len = fb_size; + info->screen_base = virt_addr; + + return 0; +} + +static void ep93xxfb_dealloc_videomem(struct fb_info *info) +{ + if (info->screen_base) + dma_free_coherent(info->dev, info->fix.smem_len, + info->screen_base, info->fix.smem_start); +} + +static int __init ep93xxfb_probe(struct platform_device *pdev) +{ + struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data; + struct fb_info *info; + struct ep93xx_fbi *fbi; + struct resource *res; + char *video_mode; + int err; + + if (!mach_info) + return -EINVAL; + + info = framebuffer_alloc(sizeof(struct ep93xx_fbi), &pdev->dev); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + platform_set_drvdata(pdev, info); + fbi = info->par; + fbi->mach_info = mach_info; + + err = fb_alloc_cmap(&info->cmap, 256, 0); + if (err) + goto failed; + + err = ep93xxfb_alloc_videomem(info); + if (err) + goto failed; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENXIO; + goto failed; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + err = -EBUSY; + goto failed; + } + + fbi->res = res; + fbi->mmio_base = ioremap(res->start, resource_size(res)); + if (!fbi->mmio_base) { + err = -ENXIO; + goto failed; + } + + strcpy(info->fix.id, pdev->name); + info->fbops = &ep93xxfb_ops; + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.accel = FB_ACCEL_NONE; + info->var.activate = FB_ACTIVATE_NOW; + info->var.vmode = FB_VMODE_NONINTERLACED; + info->flags = FBINFO_DEFAULT; + info->node = -1; + info->state = FBINFO_STATE_RUNNING; + info->pseudo_palette = &fbi->pseudo_palette; + + fb_get_options("ep93xx-fb", &video_mode); + err = fb_find_mode(&info->var, info, video_mode, + fbi->mach_info->modes, fbi->mach_info->num_modes, + fbi->mach_info->default_mode, fbi->mach_info->bpp); + if (err == 0) { + dev_err(info->dev, "No suitable video mode found\n"); + err = -EINVAL; + goto failed; + } + + if (mach_info->setup) { + err = mach_info->setup(pdev); + if (err) + return err; + } + + err = ep93xxfb_check_var(&info->var, info); + if (err) + goto failed; + + fbi->clk = clk_get(info->dev, NULL); + if (IS_ERR(fbi->clk)) { + err = PTR_ERR(fbi->clk); + fbi->clk = NULL; + goto failed; + } + + ep93xxfb_set_par(info); + clk_enable(fbi->clk); + + err = register_framebuffer(info); + if (err) + goto failed; + + dev_info(info->dev, "registered. Mode = %dx%d-%d\n", + info->var.xres, info->var.yres, info->var.bits_per_pixel); + return 0; + +failed: + if (fbi->clk) + clk_put(fbi->clk); + if (fbi->mmio_base) + iounmap(fbi->mmio_base); + if (fbi->res) + release_mem_region(fbi->res->start, resource_size(fbi->res)); + ep93xxfb_dealloc_videomem(info); + if (&info->cmap) + fb_dealloc_cmap(&info->cmap); + if (fbi->mach_info->teardown) + fbi->mach_info->teardown(pdev); + kfree(info); + platform_set_drvdata(pdev, NULL); + + return err; +} + +static int ep93xxfb_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + struct ep93xx_fbi *fbi = info->par; + + unregister_framebuffer(info); + clk_disable(fbi->clk); + clk_put(fbi->clk); + iounmap(fbi->mmio_base); + release_mem_region(fbi->res->start, resource_size(fbi->res)); + ep93xxfb_dealloc_videomem(info); + fb_dealloc_cmap(&info->cmap); + + if (fbi->mach_info->teardown) + fbi->mach_info->teardown(pdev); + + kfree(info); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver ep93xxfb_driver = { + .probe = ep93xxfb_probe, + .remove = ep93xxfb_remove, + .driver = { + .name = "ep93xx-fb", + .owner = THIS_MODULE, + }, +}; + +static int __devinit ep93xxfb_init(void) +{ + return platform_driver_register(&ep93xxfb_driver); +} + +static void __exit ep93xxfb_exit(void) +{ + platform_driver_unregister(&ep93xxfb_driver); +} + +module_init(ep93xxfb_init); +module_exit(ep93xxfb_exit); + +MODULE_DESCRIPTION("EP93XX Framebuffer Driver"); +MODULE_ALIAS("platform:ep93xx-fb"); +MODULE_AUTHOR("Ryan Mallon <ryan&bluewatersys.com>, " + "H Hartley Sweeten <hsweeten@visionengravers.com"); +MODULE_LICENSE("GPL"); |