diff options
-rw-r--r-- | drivers/crypto/hisilicon/sec2/sec_main.c | 131 |
1 files changed, 76 insertions, 55 deletions
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index dc68ba76f65e..78a604394140 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -35,15 +35,13 @@ #define SEC_CTX_Q_NUM_MAX 32 #define SEC_CTRL_CNT_CLR_CE 0x301120 -#define SEC_CTRL_CNT_CLR_CE_BIT BIT(0) -#define SEC_ENGINE_PF_CFG_OFF 0x300000 -#define SEC_ACC_COMMON_REG_OFF 0x1000 +#define SEC_CTRL_CNT_CLR_CE_BIT BIT(0) #define SEC_CORE_INT_SOURCE 0x301010 #define SEC_CORE_INT_MASK 0x301000 #define SEC_CORE_INT_STATUS 0x301008 #define SEC_CORE_SRAM_ECC_ERR_INFO 0x301C14 -#define SEC_ECC_NUM(err) (((err) >> 16) & 0xFF) -#define SEC_ECC_ADDR(err) ((err) >> 0) +#define SEC_ECC_NUM 16 +#define SEC_ECC_MASH 0xFF #define SEC_CORE_INT_DISABLE 0x0 #define SEC_CORE_INT_ENABLE 0x1ff #define SEC_CORE_INT_CLEAR 0x1ff @@ -55,23 +53,23 @@ #define SEC_RAS_CE_ENB_MSK 0x88 #define SEC_RAS_FE_ENB_MSK 0x0 #define SEC_RAS_NFE_ENB_MSK 0x177 -#define SEC_RAS_DISABLE 0x0 -#define SEC_MEM_START_INIT_REG 0x0100 -#define SEC_MEM_INIT_DONE_REG 0x0104 +#define SEC_RAS_DISABLE 0x0 +#define SEC_MEM_START_INIT_REG 0x301100 +#define SEC_MEM_INIT_DONE_REG 0x301104 -#define SEC_CONTROL_REG 0x0200 +#define SEC_CONTROL_REG 0x301200 #define SEC_TRNG_EN_SHIFT 8 #define SEC_CLK_GATE_ENABLE BIT(3) #define SEC_CLK_GATE_DISABLE (~BIT(3)) #define SEC_AXI_SHUTDOWN_ENABLE BIT(12) #define SEC_AXI_SHUTDOWN_DISABLE 0xFFFFEFFF -#define SEC_INTERFACE_USER_CTRL0_REG 0x0220 -#define SEC_INTERFACE_USER_CTRL1_REG 0x0224 -#define SEC_SAA_EN_REG 0x0270 -#define SEC_BD_ERR_CHK_EN_REG0 0x0380 -#define SEC_BD_ERR_CHK_EN_REG1 0x0384 -#define SEC_BD_ERR_CHK_EN_REG3 0x038c +#define SEC_INTERFACE_USER_CTRL0_REG 0x301220 +#define SEC_INTERFACE_USER_CTRL1_REG 0x301224 +#define SEC_SAA_EN_REG 0x301270 +#define SEC_BD_ERR_CHK_EN_REG0 0x301380 +#define SEC_BD_ERR_CHK_EN_REG1 0x301384 +#define SEC_BD_ERR_CHK_EN_REG3 0x30138c #define SEC_USER0_SMMU_NORMAL (BIT(23) | BIT(15)) #define SEC_USER1_SMMU_NORMAL (BIT(31) | BIT(23) | BIT(15) | BIT(7)) @@ -95,9 +93,6 @@ #define SEC_SQE_MASK_OFFSET 64 #define SEC_SQE_MASK_LEN 48 -#define SEC_ADDR(qm, offset) ((qm)->io_base + (offset) + \ - SEC_ENGINE_PF_CFG_OFF + SEC_ACC_COMMON_REG_OFF) - struct sec_hw_error { u32 int_msk; const char *msg; @@ -117,16 +112,43 @@ static struct hisi_qm_list sec_devices = { }; static const struct sec_hw_error sec_hw_errors[] = { - {.int_msk = BIT(0), .msg = "sec_axi_rresp_err_rint"}, - {.int_msk = BIT(1), .msg = "sec_axi_bresp_err_rint"}, - {.int_msk = BIT(2), .msg = "sec_ecc_2bit_err_rint"}, - {.int_msk = BIT(3), .msg = "sec_ecc_1bit_err_rint"}, - {.int_msk = BIT(4), .msg = "sec_req_trng_timeout_rint"}, - {.int_msk = BIT(5), .msg = "sec_fsm_hbeat_rint"}, - {.int_msk = BIT(6), .msg = "sec_channel_req_rng_timeout_rint"}, - {.int_msk = BIT(7), .msg = "sec_bd_err_rint"}, - {.int_msk = BIT(8), .msg = "sec_chain_buff_err_rint"}, - { /* sentinel */ } + { + .int_msk = BIT(0), + .msg = "sec_axi_rresp_err_rint" + }, + { + .int_msk = BIT(1), + .msg = "sec_axi_bresp_err_rint" + }, + { + .int_msk = BIT(2), + .msg = "sec_ecc_2bit_err_rint" + }, + { + .int_msk = BIT(3), + .msg = "sec_ecc_1bit_err_rint" + }, + { + .int_msk = BIT(4), + .msg = "sec_req_trng_timeout_rint" + }, + { + .int_msk = BIT(5), + .msg = "sec_fsm_hbeat_rint" + }, + { + .int_msk = BIT(6), + .msg = "sec_channel_req_rng_timeout_rint" + }, + { + .int_msk = BIT(7), + .msg = "sec_bd_err_rint" + }, + { + .int_msk = BIT(8), + .msg = "sec_chain_buff_err_rint" + }, + {} }; static const char * const sec_dbg_file_name[] = { @@ -277,9 +299,7 @@ static u8 sec_get_endian(struct hisi_qm *qm) "cannot access a register in VF!\n"); return SEC_LE; } - reg = readl_relaxed(qm->io_base + SEC_ENGINE_PF_CFG_OFF + - SEC_ACC_COMMON_REG_OFF + SEC_CONTROL_REG); - + reg = readl_relaxed(qm->io_base + SEC_CONTROL_REG); /* BD little endian mode */ if (!(reg & BIT(0))) return SEC_LE; @@ -299,13 +319,13 @@ static int sec_engine_init(struct hisi_qm *qm) u32 reg; /* disable clock gate control */ - reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); + reg = readl_relaxed(qm->io_base + SEC_CONTROL_REG); reg &= SEC_CLK_GATE_DISABLE; - writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); + writel_relaxed(reg, qm->io_base + SEC_CONTROL_REG); - writel_relaxed(0x1, SEC_ADDR(qm, SEC_MEM_START_INIT_REG)); + writel_relaxed(0x1, qm->io_base + SEC_MEM_START_INIT_REG); - ret = readl_relaxed_poll_timeout(SEC_ADDR(qm, SEC_MEM_INIT_DONE_REG), + ret = readl_relaxed_poll_timeout(qm->io_base + SEC_MEM_INIT_DONE_REG, reg, reg & 0x1, SEC_DELAY_10_US, SEC_POLL_TIMEOUT_US); if (ret) { @@ -313,40 +333,40 @@ static int sec_engine_init(struct hisi_qm *qm) return ret; } - reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); + reg = readl_relaxed(qm->io_base + SEC_CONTROL_REG); reg |= (0x1 << SEC_TRNG_EN_SHIFT); - writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); + writel_relaxed(reg, qm->io_base + SEC_CONTROL_REG); - reg = readl_relaxed(SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL0_REG)); + reg = readl_relaxed(qm->io_base + SEC_INTERFACE_USER_CTRL0_REG); reg |= SEC_USER0_SMMU_NORMAL; - writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL0_REG)); + writel_relaxed(reg, qm->io_base + SEC_INTERFACE_USER_CTRL0_REG); - reg = readl_relaxed(SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG)); + reg = readl_relaxed(qm->io_base + SEC_INTERFACE_USER_CTRL1_REG); reg &= SEC_USER1_SMMU_MASK; if (qm->use_sva && qm->ver == QM_HW_V2) reg |= SEC_USER1_SMMU_SVA; else reg |= SEC_USER1_SMMU_NORMAL; - writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG)); + writel_relaxed(reg, qm->io_base + SEC_INTERFACE_USER_CTRL1_REG); writel(SEC_SINGLE_PORT_MAX_TRANS, qm->io_base + AM_CFG_SINGLE_PORT_MAX_TRANS); - writel(SEC_SAA_ENABLE, SEC_ADDR(qm, SEC_SAA_EN_REG)); + writel(SEC_SAA_ENABLE, qm->io_base + SEC_SAA_EN_REG); /* Enable sm4 extra mode, as ctr/ecb */ writel_relaxed(SEC_BD_ERR_CHK_EN0, - SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG0)); + qm->io_base + SEC_BD_ERR_CHK_EN_REG0); /* Enable sm4 xts mode multiple iv */ writel_relaxed(SEC_BD_ERR_CHK_EN1, - SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG1)); + qm->io_base + SEC_BD_ERR_CHK_EN_REG1); writel_relaxed(SEC_BD_ERR_CHK_EN3, - SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG3)); + qm->io_base + SEC_BD_ERR_CHK_EN_REG3); /* config endian */ - reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); + reg = readl_relaxed(qm->io_base + SEC_CONTROL_REG); reg |= sec_get_endian(qm); - writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); + writel_relaxed(reg, qm->io_base + SEC_CONTROL_REG); return 0; } @@ -406,7 +426,7 @@ static void sec_hw_error_enable(struct hisi_qm *qm) return; } - val = readl(SEC_ADDR(qm, SEC_CONTROL_REG)); + val = readl(qm->io_base + SEC_CONTROL_REG); /* clear SEC hw error source if having */ writel(SEC_CORE_INT_CLEAR, qm->io_base + SEC_CORE_INT_SOURCE); @@ -422,14 +442,14 @@ static void sec_hw_error_enable(struct hisi_qm *qm) /* enable SEC block master OOO when m-bit error occur */ val = val | SEC_AXI_SHUTDOWN_ENABLE; - writel(val, SEC_ADDR(qm, SEC_CONTROL_REG)); + writel(val, qm->io_base + SEC_CONTROL_REG); } static void sec_hw_error_disable(struct hisi_qm *qm) { u32 val; - val = readl(SEC_ADDR(qm, SEC_CONTROL_REG)); + val = readl(qm->io_base + SEC_CONTROL_REG); /* disable RAS int */ writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_CE_REG); @@ -442,7 +462,7 @@ static void sec_hw_error_disable(struct hisi_qm *qm) /* disable SEC block master OOO when m-bit error occur */ val = val & SEC_AXI_SHUTDOWN_DISABLE; - writel(val, SEC_ADDR(qm, SEC_CONTROL_REG)); + writel(val, qm->io_base + SEC_CONTROL_REG); } static u32 sec_current_qm_read(struct sec_debug_file *file) @@ -712,7 +732,8 @@ static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts) err_val = readl(qm->io_base + SEC_CORE_SRAM_ECC_ERR_INFO); dev_err(dev, "multi ecc sram num=0x%x\n", - SEC_ECC_NUM(err_val)); + ((err_val) >> SEC_ECC_NUM) & + SEC_ECC_MASH); } } errs++; @@ -733,9 +754,9 @@ static void sec_open_axi_master_ooo(struct hisi_qm *qm) { u32 val; - val = readl(SEC_ADDR(qm, SEC_CONTROL_REG)); - writel(val & SEC_AXI_SHUTDOWN_DISABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); - writel(val | SEC_AXI_SHUTDOWN_ENABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); + val = readl(qm->io_base + SEC_CONTROL_REG); + writel(val & SEC_AXI_SHUTDOWN_DISABLE, qm->io_base + SEC_CONTROL_REG); + writel(val | SEC_AXI_SHUTDOWN_ENABLE, qm->io_base + SEC_CONTROL_REG); } static const struct hisi_qm_err_ini sec_err_ini = { |