diff options
| -rw-r--r-- | drivers/net/phy/Kconfig | 70 |
1 files changed, 35 insertions, 35 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 786e8b0b2d06..1c3e07c3d0b8 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -35,7 +35,7 @@ config MDIO_BCM_UNIMAC Starfighter 2 switches. config MDIO_BITBANG - tristate "Support for bitbanged MDIO buses" + tristate "Bitbanged MDIO buses" help This module implements the MDIO bus protocol in software, for use by low level drivers that export the ability to @@ -53,7 +53,7 @@ config MDIO_BUS_MUX device specific drivers. config MDIO_BUS_MUX_BCM_IPROC - tristate "Support for iProc based MDIO bus multiplexers" + tristate "Broadcom iProc based MDIO bus multiplexers" depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST) select MDIO_BUS_MUX default ARCH_BCM_IPROC @@ -64,7 +64,7 @@ config MDIO_BUS_MUX_BCM_IPROC external and selection logic lies inside the same multiplexer. config MDIO_BUS_MUX_GPIO - tristate "Support for GPIO controlled MDIO bus multiplexers" + tristate "GPIO controlled MDIO bus multiplexers" depends on OF_GPIO && OF_MDIO select MDIO_BUS_MUX help @@ -74,7 +74,7 @@ config MDIO_BUS_MUX_GPIO selection is under the control of GPIO lines. config MDIO_BUS_MUX_MMIOREG - tristate "Support for MMIO device-controlled MDIO bus multiplexers" + tristate "MMIO device-controlled MDIO bus multiplexers" depends on OF_MDIO && HAS_IOMEM select MDIO_BUS_MUX help @@ -90,7 +90,7 @@ config MDIO_CAVIUM tristate config MDIO_GPIO - tristate "Support for GPIO lib-based bitbanged MDIO buses" + tristate "GPIO lib-based bitbanged MDIO buses" depends on MDIO_BITBANG && GPIOLIB ---help--- Supports GPIO lib-based MDIO busses. @@ -113,7 +113,7 @@ config MDIO_MOXART interface units of the MOXA ART SoC config MDIO_OCTEON - tristate "Support for MDIO buses on Octeon and some ThunderX SOCs" + tristate "Octeon and some ThunderX SOCs MDIO buses" depends on 64BIT depends on HAS_IOMEM select MDIO_CAVIUM @@ -131,7 +131,7 @@ config MDIO_SUN4I A12, A10s, etc.) config MDIO_THUNDER - tristate "Support for MDIO buses on ThunderX SOCs" + tristate "ThunderX SOCs MDIO buses" depends on 64BIT depends on PCI select MDIO_CAVIUM @@ -149,41 +149,41 @@ config MDIO_XGENE comment "MII PHY device drivers" config AMD_PHY - tristate "Drivers for the AMD PHYs" + tristate "AMD PHYs" ---help--- Currently supports the am79c874 config AQUANTIA_PHY - tristate "Drivers for the Aquantia PHYs" + tristate "Aquantia PHYs" ---help--- Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 config AT803X_PHY - tristate "Drivers for Atheros AT803X PHYs" + tristate "AT803X PHYs" ---help--- Currently supports the AT8030 and AT8035 model config BCM63XX_PHY - tristate "Drivers for Broadcom 63xx SOCs internal PHY" + tristate "Broadcom 63xx SOCs internal PHY" depends on BCM63XX select BCM_NET_PHYLIB ---help--- Currently supports the 6348 and 6358 PHYs. config BCM7XXX_PHY - tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + tristate "Broadcom 7xxx SOCs internal PHYs" select BCM_NET_PHYLIB ---help--- Currently supports the BCM7366, BCM7439, BCM7445, and 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. config BCM87XX_PHY - tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" + tristate "Broadcom BCM8706 and BCM8727 PHYs" help Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. config BCM_CYGNUS_PHY - tristate "Drivers for Broadcom Cygnus SoC internal PHY" + tristate "Broadcom Cygnus SoC internal PHY" depends on ARCH_BCM_CYGNUS || COMPILE_TEST depends on MDIO_BCM_IPROC select BCM_NET_PHYLIB @@ -199,34 +199,34 @@ config BCM_NET_PHYLIB tristate config BROADCOM_PHY - tristate "Drivers for Broadcom PHYs" + tristate "Broadcom PHYs" select BCM_NET_PHYLIB ---help--- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481 and BCM5482 PHYs. config CICADA_PHY - tristate "Drivers for the Cicada PHYs" + tristate "Cicada PHYs" ---help--- Currently supports the cis8204 config DAVICOM_PHY - tristate "Drivers for Davicom PHYs" + tristate "Davicom PHYs" ---help--- Currently supports dm9161e and dm9131 config DP83848_PHY - tristate "Driver for Texas Instruments DP83848 PHY" + tristate "Texas Instruments DP83848 PHY" ---help--- Supports the DP83848 PHY. config DP83867_PHY - tristate "Drivers for Texas Instruments DP83867 Gigabit PHY" + tristate "Texas Instruments DP83867 Gigabit PHY" ---help--- Currently supports the DP83867 PHY. config FIXED_PHY - tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB select SWPHY ---help--- @@ -236,12 +236,12 @@ config FIXED_PHY Currently tested with mpc866ads and mpc8349e-mitx. config ICPLUS_PHY - tristate "Drivers for ICPlus PHYs" + tristate "ICPlus PHYs" ---help--- Currently supports the IP175C and IP1001 PHYs. config INTEL_XWAY_PHY - tristate "Driver for Intel XWAY PHYs" + tristate "Intel XWAY PHYs" ---help--- Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. These PHYs are marked as standalone chips under the names @@ -249,67 +249,67 @@ config INTEL_XWAY_PHY SoCs xRX200, xRX300, xRX330, xRX350 and xRX550. config LSI_ET1011C_PHY - tristate "Driver for LSI ET1011C PHY" + tristate "LSI ET1011C PHY" ---help--- Supports the LSI ET1011C PHY. config LXT_PHY - tristate "Drivers for the Intel LXT PHYs" + tristate "Intel LXT PHYs" ---help--- Currently supports the lxt970, lxt971 config MARVELL_PHY - tristate "Drivers for Marvell PHYs" + tristate "Marvell PHYs" ---help--- Currently has a driver for the 88E1011S config MICREL_PHY - tristate "Driver for Micrel PHYs" + tristate "Micrel PHYs" ---help--- Supports the KSZ9021, VSC8201, KS8001 PHYs. config MICROCHIP_PHY - tristate "Drivers for Microchip PHYs" + tristate "Microchip PHYs" help Supports the LAN88XX PHYs. config MICROSEMI_PHY - tristate "Drivers for the Microsemi PHYs" + tristate "Microsemi PHYs" ---help--- Currently supports the VSC8531 and VSC8541 PHYs config NATIONAL_PHY - tristate "Drivers for National Semiconductor PHYs" + tristate "National Semiconductor PHYs" ---help--- Currently supports the DP83865 PHY. config QSEMI_PHY - tristate "Drivers for Quality Semiconductor PHYs" + tristate "Quality Semiconductor PHYs" ---help--- Currently supports the qs6612 config REALTEK_PHY - tristate "Drivers for Realtek PHYs" + tristate "Realtek PHYs" ---help--- Supports the Realtek 821x PHY. config SMSC_PHY - tristate "Drivers for SMSC PHYs" + tristate "SMSC PHYs" ---help--- Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs config STE10XP - tristate "Driver for STMicroelectronics STe10Xp PHYs" + tristate "STMicroelectronics STe10Xp PHYs" ---help--- This is the driver for the STe100p and STe101p PHYs. config TERANETICS_PHY - tristate "Drivers for the Teranetics PHYs" + tristate "Teranetics PHYs" ---help--- Currently supports the Teranetics TN2020 config VITESSE_PHY - tristate "Drivers for the Vitesse PHYs" + tristate "Vitesse PHYs" ---help--- Currently supports the vsc8244 |