diff options
| -rw-r--r-- | arch/arc/plat-axs10x/axs10x.c | 118 |
1 files changed, 5 insertions, 113 deletions
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c index 38ff349d7f2a..6c0cb084e636 100644 --- a/arch/arc/plat-axs10x/axs10x.c +++ b/arch/arc/plat-axs10x/axs10x.c @@ -80,22 +80,6 @@ static void __init axs10x_enable_gpio_intc_wire(void) iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN); } -static inline void __init -write_cgu_reg(uint32_t value, void __iomem *reg, void __iomem *lock_reg) -{ - unsigned int loops = 128 * 1024, ctr; - - iowrite32(value, reg); - - ctr = loops; - while (((ioread32(lock_reg) & 1) == 1) && ctr--) /* wait for unlock */ - cpu_relax(); - - ctr = loops; - while (((ioread32(lock_reg) & 1) == 0) && ctr--) /* wait for re-lock */ - cpu_relax(); -} - static void __init axs10x_print_board_ver(unsigned int creg, const char *str) { union ver { @@ -314,7 +298,6 @@ static void __init axs101_early_init(void) #ifdef CONFIG_AXS103 -#define AXC003_CGU 0xF0000000 #define AXC003_CREG 0xF0001000 #define AXC003_MST_AXI_TUNNEL 0 #define AXC003_MST_HS38 1 @@ -324,72 +307,12 @@ static void __init axs101_early_init(void) #define CREG_CPU_TUN_IO_CTRL (AXC003_CREG + 0x494) -union pll_reg { - struct { -#ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int pad:17, noupd:1, bypass:1, edge:1, high:6, low:6; -#else - unsigned int low:6, high:6, edge:1, bypass:1, noupd:1, pad:17; -#endif - }; - unsigned int val; -}; - -static unsigned int __init axs103_get_freq(void) -{ - union pll_reg idiv, fbdiv, odiv; - unsigned int f = 33333333; - - idiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 0); - fbdiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 4); - odiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 8); - - if (idiv.bypass != 1) - f = f / (idiv.low + idiv.high); - - if (fbdiv.bypass != 1) - f = f * (fbdiv.low + fbdiv.high); - - if (odiv.bypass != 1) - f = f / (odiv.low + odiv.high); - - f = (f + 500000) / 1000000; /* Rounding */ - return f; -} - -static inline unsigned int __init encode_div(unsigned int id, int upd) -{ - union pll_reg div; - - div.val = 0; - - div.noupd = !upd; - div.bypass = id == 1 ? 1 : 0; - div.edge = (id%2 == 0) ? 0 : 1; /* 0 = rising */ - div.low = (id%2 == 0) ? id >> 1 : (id >> 1)+1; - div.high = id >> 1; - - return div.val; -} - -noinline static void __init -axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od) -{ - write_cgu_reg(encode_div(id, 0), - (void __iomem *)AXC003_CGU + 0x80 + 0, - (void __iomem *)AXC003_CGU + 0x110); - - write_cgu_reg(encode_div(fd, 0), - (void __iomem *)AXC003_CGU + 0x80 + 4, - (void __iomem *)AXC003_CGU + 0x110); - - write_cgu_reg(encode_div(od, 1), - (void __iomem *)AXC003_CGU + 0x80 + 8, - (void __iomem *)AXC003_CGU + 0x110); -} - static void __init axs103_early_init(void) { + /* + * TODO: use cpu node "cpu-freq" param instead of platform-specific + * "/cpu_card/core_clk" as it works only if we use fixed-clock for cpu. + */ int offset = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk"); const struct fdt_property *prop = fdt_get_property(initial_boot_params, offset, @@ -399,7 +322,7 @@ static void __init axs103_early_init(void) /* * AXS103 configurations for SMP/QUAD configurations share device tree - * which defaults to 90 MHz. However recent failures of Quad config + * which defaults to 100 MHz. However recent failures of Quad config * revealed P&R timing violations so clamp it down to safe 50 MHz * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack * @@ -412,37 +335,6 @@ static void __init axs103_early_init(void) freq = 50; #endif - switch (freq) { - case 33: - axs103_set_freq(1, 1, 1); - break; - case 50: - axs103_set_freq(1, 30, 20); - break; - case 75: - axs103_set_freq(2, 45, 10); - break; - case 90: - axs103_set_freq(2, 54, 10); - break; - case 100: - axs103_set_freq(1, 30, 10); - break; - case 125: - axs103_set_freq(2, 45, 6); - break; - default: - /* - * In this case, core_frequency derived from - * DT "clock-frequency" might not match with board value. - * Hence update it to match the board value. - */ - freq = axs103_get_freq(); - break; - } - - pr_info("Freq is %dMHz\n", freq); - /* Patching .dtb in-place with new core clock value */ if (freq != orig ) { freq = cpu_to_be32(freq * 1000000); |