diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250_of.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 22 | ||||
| -rw-r--r-- | include/uapi/linux/serial_core.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/serial_reg.h | 8 |
4 files changed, 33 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index d25ab1cd4295..52812524abfb 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -332,6 +332,7 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_ALTR_16550_F128, }, { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, + { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 3cfdd745a97a..f88028a62f23 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -273,6 +273,15 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, + [PORT_DA830] = { + .name = "TI DA8xx/66AK2x", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; /* Uart divisor latch read */ @@ -2114,6 +2123,19 @@ int serial8250_do_startup(struct uart_port *port) serial_port_out(port, UART_LCR, 0); } + if (port->type == PORT_DA830) { + /* Reset the port */ + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); + mdelay(10); + + /* Enable Tx, Rx and free run mode */ + serial_port_out(port, UART_DA830_PWREMU_MGMT, + UART_DA830_PWREMU_MGMT_UTRST | + UART_DA830_PWREMU_MGMT_URRST | + UART_DA830_PWREMU_MGMT_FREE); + } + #ifdef CONFIG_SERIAL_8250_RSA /* * If this is an RSA port, see if we can kick it up to the diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 99dbed8a8874..9ec741b133fe 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -56,7 +56,8 @@ #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ #define PORT_RT2880 29 /* Ralink RT2880 internal UART */ #define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */ -#define PORT_MAX_8250 30 /* max port ID */ +#define PORT_DA830 31 /* TI DA8xx/66AK2x */ +#define PORT_MAX_8250 31 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index b4c04842a8c0..274d8fc206e3 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -327,6 +327,14 @@ #define SERIAL_RSA_BAUD_BASE (921600) #define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) +/* Extra registers for TI DA8xx/66AK2x */ +#define UART_DA830_PWREMU_MGMT 12 + +/* PWREMU_MGMT register bits */ +#define UART_DA830_PWREMU_MGMT_FREE (1 << 0) /* Free-running mode */ +#define UART_DA830_PWREMU_MGMT_URRST (1 << 13) /* Receiver reset/enable */ +#define UART_DA830_PWREMU_MGMT_UTRST (1 << 14) /* Transmitter reset/enable */ + /* * Extra serial register definitions for the internal UARTs * in TI OMAP processors. |