diff options
47 files changed, 49 insertions, 160 deletions
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index a803b605051b..3daef94bee38 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -70,7 +70,7 @@ broken-cd; bypass-smu; cap-mmc-highspeed; - supports-hs200-mode; /* 200 Mhz */ + supports-hs200-mode; /* 200 MHz */ card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index f5b5a1d96cd7..53ae04f9104d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -66,7 +66,7 @@ otg_drv_vbus: pinmux_otg_drv_vbus { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */ >; }; diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index cd20029bcd94..6c7182f32cef 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -7,6 +7,7 @@ struct sleep_save_sp { }; extern void cpu_resume(void); +extern void cpu_resume_arm(void); extern int cpu_suspend(unsigned long, int (*)(unsigned long)); #endif diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 76bb3128e135..c5e1e21a294f 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -118,6 +118,16 @@ ENDPROC(cpu_resume_after_mmu) .text .align + +#ifdef CONFIG_MMU + .arm +ENTRY(cpu_resume_arm) + THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) +#endif + ENTRY(cpu_resume) ARM_BE8(setend be) @ ensure we are in BE mode #ifdef CONFIG_ARM_VIRT_EXT @@ -150,6 +160,10 @@ THUMB( mov sp, r2 ) THUMB( bx r3 ) ENDPROC(cpu_resume) +#ifdef CONFIG_MMU +ENDPROC(cpu_resume_arm) +#endif + .align 2 _sleep_save_sp: .long sleep_save_sp - . diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 4c38674c73ec..54d274da7ccb 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -43,5 +43,5 @@ obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o ifeq ($(CONFIG_ARCH_BRCMSTB),y) CFLAGS_platsmp-brcmstb.o += -march=armv7-a obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o +obj-$(CONFIG_SMP) += platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d112b36..000000000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea58248..000000000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <asm/assembler.h> -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index e209e6fc7caf..44d6bddf7a4e 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -30,8 +30,6 @@ #include <asm/mach-types.h> #include <asm/smp_plat.h> -#include "brcmstb.h" - enum { ZONE_MAN_CLKEN_MASK = BIT(0), ZONE_MAN_RESET_CNTL_MASK = BIT(1), @@ -153,7 +151,7 @@ static void brcmstb_cpu_boot(u32 cpu) * Set the reset vector to point to the secondary_startup * routine */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); + cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup)); /* Unhalt the cpu */ cpu_rst_cfg_set(cpu, 0); diff --git a/arch/arm/mach-berlin/headsmp.S b/arch/arm/mach-berlin/headsmp.S index 4a4c56a58ad3..dc82a3486b05 100644 --- a/arch/arm/mach-berlin/headsmp.S +++ b/arch/arm/mach-berlin/headsmp.S @@ -12,12 +12,6 @@ #include <linux/init.h> #include <asm/assembler.h> -ENTRY(berlin_secondary_startup) - ARM_BE8(setend be) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(berlin_secondary_startup) - /* * If the following instruction is set in the reset exception vector, CPUs * will fetch the value of the software reset address vector when being diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c index 702e7982015a..34a3753e7356 100644 --- a/arch/arm/mach-berlin/platsmp.c +++ b/arch/arm/mach-berlin/platsmp.c @@ -22,7 +22,6 @@ #define RESET_VECT 0x00 #define SW_RESET_ADDR 0x94 -extern void berlin_secondary_startup(void); extern u32 boot_inst; static void __iomem *cpu_ctrl; @@ -85,7 +84,7 @@ static void __init berlin_smp_prepare_cpus(unsigned int max_cpus) * Write the secondary startup address into the SW reset address * vector. This is used by boot_inst. */ - writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR); + writel(virt_to_phys(secondary_startup), vectors_base + SW_RESET_ADDR); iounmap(vectors_base); unmap_scu: diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 39e58b48e826..f9f9713aacdd 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -36,7 +36,7 @@ extern void __iomem *da8xx_syscfg1_base; /* * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade - * (than the regular 300Mhz variant), the board code should set this up + * (than the regular 300MHz variant), the board code should set this up * with the supported speed before calling da850_register_cpufreq(). */ extern unsigned int da850_max_speed; diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index 6b7b3033de0b..659db1933ed3 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -6,4 +6,4 @@ CFLAGS_platmcpm.o := -march=armv7-a obj-y += hisilicon.o obj-$(CONFIG_MCPM) += platmcpm.o -obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o hotplug.o diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h index 92a682d8e939..c7648ef1825c 100644 --- a/arch/arm/mach-hisi/core.h +++ b/arch/arm/mach-hisi/core.h @@ -12,7 +12,6 @@ extern void hi3xxx_cpu_die(unsigned int cpu); extern int hi3xxx_cpu_kill(unsigned int cpu); extern void hi3xxx_set_cpu(int cpu, bool enable); -extern void hisi_secondary_startup(void); extern struct smp_operations hix5hd2_smp_ops; extern void hix5hd2_set_cpu(int cpu, bool enable); extern void hix5hd2_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-hisi/headsmp.S b/arch/arm/mach-hisi/headsmp.S deleted file mode 100644 index 81e35b159e75..000000000000 --- a/arch/arm/mach-hisi/headsmp.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (c) 2014 Hisilicon Limited. - * Copyright (c) 2014 Linaro Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - - __CPUINIT - -ENTRY(hisi_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index 8880c8e8b296..51744127db66 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -118,7 +118,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) { phys_addr_t jumpaddr; - jumpaddr = virt_to_phys(hisi_secondary_startup); + jumpaddr = virt_to_phys(secondary_startup); hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr); hix5hd2_set_cpu(cpu, true); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); @@ -156,7 +156,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) struct device_node *node; - jumpaddr = virt_to_phys(hisi_secondary_startup); + jumpaddr = virt_to_phys(secondary_startup); hip01_set_boot_addr(HIP01_BOOT_ADDRESS, jumpaddr); node = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 5a3e5a159e70..87c5b0911ddd 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -216,7 +216,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); - /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */ + /* FIXME 100MHz is used for pcie ref for all imx6 pcie, excepted imx6q */ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); @@ -520,7 +520,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) pr_err("Failed to set pcie parent clk.\n"); /* - * Init enet system AHB clock, set to 200Mhz + * Init enet system AHB clock, set to 200MHz * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB */ clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index de5047c8a6c8..b5e976816b63 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -25,7 +25,6 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) - bl v7_invalidate_l1 set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h index 15bc9bb78a6b..c871e6874594 100644 --- a/arch/arm/mach-iop13xx/include/mach/time.h +++ b/arch/arm/mach-iop13xx/include/mach/time.h @@ -42,7 +42,7 @@ static inline unsigned long iop13xx_core_freq(void) case IOP13XX_CORE_FREQ_1200: return 1200000000; default: - printk("%s: warning unknown frequency, defaulting to 800Mhz\n", + printk("%s: warning unknown frequency, defaulting to 800MHz\n", __func__); } diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h index 75c4c6572ad0..34b3d3f3f131 100644 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -74,7 +74,7 @@ extern unsigned long ixp4xx_exp_bus_size; /* * Clock Speed Definitions. */ -#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ +#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */ #define IXP4XX_UART_XTAL 14745600 /* diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 5090338c0db2..959c748ee8bb 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -17,7 +17,7 @@ #include <asm/sizes.h> /* - * Clocks are derived from MCLK, which is 25Mhz + * Clocks are derived from MCLK, which is 25MHz */ #define KS8695_CLOCK_RATE 25000000 diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S index 08d5ed46b996..48e4c4b3cd1c 100644 --- a/arch/arm/mach-mvebu/headsmp-a9.S +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -21,7 +21,6 @@ ENTRY(mvebu_cortex_a9_secondary_startup) ARM_BE8(setend be) - bl v7_invalidate_l1 bl armada_38x_scu_power_up b secondary_startup ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index f899e77ff5e6..17a6f752a436 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -216,11 +216,11 @@ static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); - if (gpmc_clk_ns < 15) /* >66Mhz */ + if (gpmc_clk_ns < 15) /* >66MHz */ onenand_flags |= ONENAND_FLAG_HF; else onenand_flags &= ~ONENAND_FLAG_HF; - if (gpmc_clk_ns < 12) /* >83Mhz */ + if (gpmc_clk_ns < 12) /* >83MHz */ onenand_flags |= ONENAND_FLAG_VHF; else onenand_flags &= ~ONENAND_FLAG_VHF; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 9a8611ab5dfa..cff079e563f4 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -70,7 +70,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, reg = omap_ctrl_readl(control_pbias_offset); if (cpu_is_omap3630()) { - /* Set MMC I/O to 52Mhz */ + /* Set MMC I/O to 52MHz */ prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 0e75ec3e114b..b2233b72b24d 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -116,7 +116,7 @@ const struct prcm_config omap2430_rate_table[] = { RATE_IN_243X}, /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, @@ -124,7 +124,7 @@ const struct prcm_config omap2430_rate_table[] = { RATE_IN_243X}, /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index ae3f1553158d..339b0ecb7c32 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -164,6 +164,6 @@ void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode) mem_timings.slow_dll_ctrl |= ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); - /* 90 degree phase for anything below 133Mhz + disable DLL filter */ + /* 90 degree phase for anything below 133MHz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 2c88ff2d0236..53a2537cd75a 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -64,7 +64,7 @@ ENTRY(omap242x_sram_ddr_init) mvn r9, #0x4 @ mask to get clear bit2 and r10, r10, r9 @ clear bit2 for lock mode. orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) - orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz str r10, [r11] @ commit to DLLA_CTRL bl i_dll_wait @ wait for dll to lock diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index d5deb9761fc7..b3edd6f7f7db 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -64,7 +64,7 @@ ENTRY(omap243x_sram_ddr_init) mvn r9, #0x4 @ mask to get clear bit2 and r10, r10, r9 @ clear bit2 for lock mode. orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) - orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz str r10, [r11] @ commit to DLLA_CTRL bl i_dll_wait @ wait for dll to lock diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S index d86fe33c5f53..209d9fc5c16c 100644 --- a/arch/arm/mach-prima2/headsmp.S +++ b/arch/arm/mach-prima2/headsmp.S @@ -15,7 +15,6 @@ * ready for them to initialise. */ ENTRY(sirfsoc_secondary_startup) - bl v7_invalidate_l1 mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 854f1f562d6b..14f6aaf8fcc9 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -28,7 +28,7 @@ static void isp116x_pfm_delay(struct device *dev, int delay) { - /* 400Mhz PXA2 = 2.5ns / instruction */ + /* 400MHz PXA2 = 2.5ns / instruction */ int cyc = delay / 10; diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h index 39bca96b555a..492c048813da 100644 --- a/arch/arm/mach-rockchip/core.h +++ b/arch/arm/mach-rockchip/core.h @@ -17,4 +17,3 @@ extern char rockchip_secondary_trampoline; extern char rockchip_secondary_trampoline_end; extern unsigned long rockchip_boot_fn; -extern void rockchip_secondary_startup(void); diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S index 46c22dedf632..d69708b07282 100644 --- a/arch/arm/mach-rockchip/headsmp.S +++ b/arch/arm/mach-rockchip/headsmp.S @@ -15,14 +15,6 @@ #include <linux/linkage.h> #include <linux/init.h> -ENTRY(rockchip_secondary_startup) - mrc p15, 0, r0, c0, c0, 0 @ read main ID register - ldr r1, =0x00000c09 @ Cortex-A9 primary part number - teq r0, r1 - beq v7_invalidate_l1 - b secondary_startup -ENDPROC(rockchip_secondary_startup) - ENTRY(rockchip_secondary_trampoline) ldr pc, 1f ENDPROC(rockchip_secondary_trampoline) diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 5b4ca3c3c879..2e6ab67e2284 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -149,8 +149,7 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu, * sram_base_addr + 8: start address for pc * */ udelay(10); - writel(virt_to_phys(rockchip_secondary_startup), - sram_base_addr + 8); + writel(virt_to_phys(secondary_startup), sram_base_addr + 8); writel(0xDEADBEAF, sram_base_addr + 4); dsb_sev(); } @@ -189,7 +188,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) } /* set the boot function for the sram code */ - rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup); + rockchip_boot_fn = virt_to_phys(secondary_startup); /* copy the trampoline to sram, that runs during startup of the core */ memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz); diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index afc60bad6fd6..476092b86c6e 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -14,7 +14,6 @@ extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern int shmobile_smp_cpu_disable(unsigned int cpu); -extern void shmobile_invalidate_start(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index 69df8bfac167..fa5248c52399 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -22,7 +22,7 @@ * Boot code for secondary CPUs. * * First we turn on L1 cache coherency for our CPU. Then we jump to - * shmobile_invalidate_start that invalidates the cache and hands over control + * secondary_startup that invalidates the cache and hands over control * to the common ARM startup code. */ ENTRY(shmobile_boot_scu) @@ -36,7 +36,7 @@ ENTRY(shmobile_boot_scu) bic r2, r2, r3 @ Clear bits of our CPU (Run Mode) str r2, [r0, #8] @ write back - b shmobile_invalidate_start + b secondary_startup ENDPROC(shmobile_boot_scu) .text diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 50c491567e11..330c1fc63197 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -16,13 +16,6 @@ #include <asm/assembler.h> #include <asm/memory.h> -#ifdef CONFIG_SMP -ENTRY(shmobile_invalidate_start) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(shmobile_invalidate_start) -#endif - /* * Reset vector for secondary CPUs. * This will be mapped at address 0 by SBAR register. diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index f483b560b066..b0790fc32282 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -133,7 +133,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) { /* For this particular CPU register boot vector */ - shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0); + shmobile_smp_hook(cpu, virt_to_phys(secondary_startup), 0); return apmu_wrap(cpu, apmu_power_on); } diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index a0f3b1cd497c..767c09e954a0 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -31,7 +31,6 @@ #define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */ -extern void socfpga_secondary_startup(void); extern void __iomem *socfpga_scu_base_addr; extern void socfpga_init_clocks(void); diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index f65ea0af4af3..5bb016427107 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -30,8 +30,3 @@ ENTRY(secondary_trampoline) 1: .long . .long socfpga_cpu1start_addr ENTRY(secondary_trampoline_end) - -ENTRY(socfpga_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(socfpga_secondary_startup) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index c64d89b7c0ca..79c5336c569f 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -40,7 +40,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); - writel(virt_to_phys(socfpga_secondary_startup), + writel(virt_to_phys(secondary_startup), sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)); flush_cache_all(); diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index e48a74458c25..fffad2426ee4 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S deleted file mode 100644 index 2072e7322c39..000000000000 --- a/arch/arm/mach-tegra/headsmp.S +++ /dev/null @@ -1,12 +0,0 @@ -#include <linux/linkage.h> -#include <linux/init.h> - -#include "sleep.h" - - .section ".text.head", "ax" - -ENTRY(tegra_secondary_startup) - check_cpu_part_num 0xc09, r8, r9 - bleq v7_invalidate_l1 - b secondary_startup -ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 894c5c472184..6fd9db54887e 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -94,7 +94,7 @@ void __init tegra_cpu_reset_handler_init(void) __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = *((u32 *)cpu_possible_mask); __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] = - virt_to_phys((void *)tegra_secondary_startup); + virt_to_phys((void *)secondary_startup); #endif #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index 76a93434c6ee..0aee0129f8d7 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -36,7 +36,6 @@ extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; void __tegra_cpu_reset_handler_start(void); void __tegra_cpu_reset_handler(void); void __tegra_cpu_reset_handler_end(void); -void tegra_secondary_startup(void); #ifdef CONFIG_PM_SLEEP #define tegra_cpu_lp1_mask \ diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 382c60e9aa16..7038cae95ddc 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,8 +17,6 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void zynq_secondary_startup(void); - extern int zynq_slcr_init(void); extern int zynq_early_slcr_init(void); extern void zynq_slcr_system_reset(void); diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index dd8c071941e7..045c72720a4d 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -22,8 +22,3 @@ zynq_secondary_trampoline_jump: .globl zynq_secondary_trampoline_end zynq_secondary_trampoline_end: ENDPROC(zynq_secondary_trampoline) - -ENTRY(zynq_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(zynq_secondary_startup) diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index 52d768ff7857..f66816c49186 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c @@ -87,10 +87,9 @@ int zynq_cpun_start(u32 address, int cpu) } EXPORT_SYMBOL(zynq_cpun_start); -static int zynq_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int zynq_boot_secondary(unsigned int cpu, struct task_struct *idle) { - return zynq_cpun_start(virt_to_phys(zynq_secondary_startup), cpu); + return zynq_cpun_start(virt_to_phys(secondary_startup), cpu); } /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 003190ae9cd8..0716bbe19872 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -414,7 +414,7 @@ __v7_pj4b_setup: __v7_setup: adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} - bl v7_flush_dcache_louis + bl v7_invalidate_l1 ldmia r12, {r0-r5, r7, r9, r11, lr} and r0, r9, #0xff000000 @ ARM? |