diff options
37 files changed, 483 insertions, 498 deletions
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt new file mode 100644 index 000000000000..af84cce5cd7b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mux.txt @@ -0,0 +1,60 @@ +Common i2c bus multiplexer/switch properties. + +An i2c bus multiplexer/switch will have several child busses that are +numbered uniquely in a device dependent manner. The nodes for an i2c bus +multiplexer/switch will have one child node for each child +bus. + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; + +Required properties for child nodes: +- #address-cells = <1>; +- #size-cells = <0>; +- reg : The sub-bus number. + +Optional properties for child nodes: +- Other properties specific to the multiplexer/switch hardware. +- Child nodes conforming to i2c bus binding + + +Example : + + /* + An NXP pca9548 8 channel I2C multiplexer at address 0x70 + with two NXP pca8574 GPIO expanders attached, one each to + ports 3 and 4. + */ + + mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio1: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio2: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt index 38832c712919..b6cb5a12c672 100644 --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt @@ -6,14 +6,18 @@ Required properties: - compatible: value should be either of the following. (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. + (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used + inside HDMIPHY block found on several samsung SoCs - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. - - gpios: The order of the gpios should be the following: <SDA, SCL>. - The gpio specifier depends on the gpio controller. Optional properties: + - gpios: The order of the gpios should be the following: <SDA, SCL>. + The gpio specifier depends on the gpio controller. Required in all + cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output + lines are permanently wired to the respective client - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt new file mode 100644 index 000000000000..ceabbe91ae44 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xiic.txt @@ -0,0 +1,22 @@ +Xilinx IIC controller: + +Required properties: +- compatible : Must be "xlnx,xps-iic-2.00.a" +- reg : IIC register location and length +- interrupts : IIC controller unterrupt +- #address-cells = <1> +- #size-cells = <0> + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio index 811cd78d4cdc..bd9b2299b739 100644 --- a/Documentation/i2c/muxes/gpio-i2cmux +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -1,11 +1,11 @@ -Kernel driver gpio-i2cmux +Kernel driver i2c-gpio-mux Author: Peter Korsgaard <peter.korsgaard@barco.com> Description ----------- -gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments from a master I2C bus and a hardware MUX controlled through GPIO pins. E.G.: @@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N. Usage ----- -gpio-i2cmux uses the platform bus, so you need to provide a struct +i2c-gpio-mux uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct gpio_i2cmux_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/gpio-i2cmux.h for details. +to control it. See include/linux/i2c-gpio-mux.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include <linux/gpio-i2cmux.h> +#include <linux/i2c-gpio-mux.h> #include <linux/platform_device.h> static const unsigned myboard_gpiomux_gpios[] = { @@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { }; static struct platform_device myboard_i2cmux = { - .name = "gpio-i2cmux", + .name = "i2c-gpio-mux", .id = 0, .dev = { .platform_data = &myboard_i2cmux_data, diff --git a/MAINTAINERS b/MAINTAINERS index daa31999b2a1..6f90c64a2539 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2988,9 +2988,9 @@ GENERIC GPIO I2C MULTIPLEXER DRIVER M: Peter Korsgaard <peter.korsgaard@barco.com> L: linux-i2c@vger.kernel.org S: Supported -F: drivers/i2c/muxes/gpio-i2cmux.c -F: include/linux/gpio-i2cmux.h -F: Documentation/i2c/muxes/gpio-i2cmux +F: drivers/i2c/muxes/i2c-mux-gpio.c +F: include/linux/i2c-mux-gpio.h +F: Documentation/i2c/muxes/i2c-mux-gpio GENERIC HDLC (WAN) DRIVERS M: Krzysztof Halasa <khc@pm.waw.pl> @@ -5148,7 +5148,7 @@ PCA9541 I2C BUS MASTER SELECTOR DRIVER M: Guenter Roeck <guenter.roeck@ericsson.com> L: linux-i2c@vger.kernel.org S: Maintained -F: drivers/i2c/muxes/pca9541.c +F: drivers/i2c/muxes/i2c-mux-pca9541.c PCA9564/PCA9665 I2C BUS DRIVER M: Wolfram Sang <w.sang@pengutronix.de> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5f13c62e64b4..5a3bb3d738d8 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -49,7 +49,6 @@ config I2C_CHARDEV config I2C_MUX tristate "I2C bus multiplexing support" - depends on EXPERIMENTAL help Say Y here if you want the I2C core to support the ability to handle multiplexed I2C bus topologies, by presenting each diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index eec2cf57539a..7244c8be6063 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -445,20 +445,6 @@ config I2C_IOP3XX This driver can also be built as a module. If so, the module will be called i2c-iop3xx. -config I2C_IXP2000 - tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" - depends on ARCH_IXP2000 - select I2C_ALGOBIT - help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based - system and are using GPIO lines for an I2C bus. - - This support is also available as a module. If so, the module - will be called i2c-ixp2000. - - This driver is deprecated and will be dropped soon. Use i2c-gpio - instead. - config I2C_MPC tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" depends on PPC diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 569567b0d027..ce3c2be7fb40 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o -obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_MXS) += i2c-mxs.o diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index a76d85fa3ad7..79b4bcb3b85c 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -755,7 +755,7 @@ static int davinci_i2c_remove(struct platform_device *pdev) dev->clk = NULL; davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0); - free_irq(IRQ_I2C, dev); + free_irq(dev->irq, dev); iounmap(dev->base); kfree(dev); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index df8799241009..1e48bec80edf 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -164,9 +164,15 @@ static char *abort_sources[] = { u32 dw_readl(struct dw_i2c_dev *dev, int offset) { - u32 value = readl(dev->base + offset); + u32 value; - if (dev->swab) + if (dev->accessor_flags & ACCESS_16BIT) + value = readw(dev->base + offset) | + (readw(dev->base + offset + 2) << 16); + else + value = readl(dev->base + offset); + + if (dev->accessor_flags & ACCESS_SWAP) return swab32(value); else return value; @@ -174,10 +180,15 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset) void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) { - if (dev->swab) + if (dev->accessor_flags & ACCESS_SWAP) b = swab32(b); - writel(b, dev->base + offset); + if (dev->accessor_flags & ACCESS_16BIT) { + writew((u16)b, dev->base + offset); + writew((u16)(b >> 16), dev->base + offset + 2); + } else { + writel(b, dev->base + offset); + } } static u32 @@ -251,14 +262,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev) input_clock_khz = dev->get_clk_rate_khz(dev); - /* Configure register endianess access */ reg = dw_readl(dev, DW_IC_COMP_TYPE); if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) { - dev->swab = 1; - reg = DW_IC_COMP_TYPE_VALUE; - } - - if (reg != DW_IC_COMP_TYPE_VALUE) { + /* Configure register endianess access */ + dev->accessor_flags |= ACCESS_SWAP; + } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) { + /* Configure register access mode 16bit */ + dev->accessor_flags |= ACCESS_16BIT; + } else if (reg != DW_IC_COMP_TYPE_VALUE) { dev_err(dev->dev, "Unknown Synopsys component type: " "0x%08x\n", reg); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 02d1a2ddd853..9c1840ee09c7 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -82,7 +82,7 @@ struct dw_i2c_dev { unsigned int status; u32 abort_source; int irq; - int swab; + u32 accessor_flags; struct i2c_adapter adapter; u32 functionality; u32 master_cfg; @@ -90,6 +90,9 @@ struct dw_i2c_dev { unsigned int rx_fifo_depth; }; +#define ACCESS_SWAP 0x00000001 +#define ACCESS_16BIT 0x00000002 + extern u32 dw_readl(struct dw_i2c_dev *dev, int offset); extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); extern int i2c_dw_init(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4ba589ab8614..0506fef8dc00 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -36,6 +36,7 @@ #include <linux/interrupt.h> #include <linux/of_i2c.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/io.h> #include <linux/slab.h> #include "i2c-designware-core.h" @@ -95,7 +96,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) r = -ENODEV; goto err_free_mem; } - clk_enable(dev->clk); + clk_prepare_enable(dev->clk); dev->functionality = I2C_FUNC_I2C | @@ -155,7 +156,7 @@ err_free_irq: err_iounmap: iounmap(dev->base); err_unuse_clocks: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); dev->clk = NULL; err_free_mem: @@ -177,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); put_device(&pdev->dev); - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); dev->clk = NULL; @@ -198,6 +199,31 @@ static const struct of_device_id dw_i2c_of_match[] = { MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #endif +#ifdef CONFIG_PM +static int dw_i2c_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); + + clk_disable_unprepare(i_dev->clk); + + return 0; +} + +static int dw_i2c_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); + + clk_prepare_enable(i_dev->clk); + i2c_dw_init(i_dev); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); + /* work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_designware"); @@ -207,6 +233,7 @@ static struct platform_driver dw_i2c_driver = { .name = "i2c_designware", .owner = THIS_MODULE, .of_match_table = of_match_ptr(dw_i2c_of_match), + .pm = &dw_i2c_dev_pm_ops, }, }; diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index c811289b61e2..2f74ae872e1e 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -263,11 +263,6 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap) init_waitqueue_head(&pch_event); } -static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2) -{ - return cmp1.tv64 < cmp2.tv64; -} - /** * pch_i2c_wait_for_bus_idle() - check the status of bus. * @adap: Pointer to struct i2c_algo_pch_data. @@ -317,33 +312,6 @@ static void pch_i2c_start(struct i2c_algo_pch_data *adap) } /** - * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event - * @adap: Pointer to struct i2c_algo_pch_data. - */ -static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap) -{ - long ret; - ret = wait_event_timeout(pch_event, - (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); - - if (ret == 0) { - pch_err(adap, "timeout: %x\n", adap->pch_event_flag); - adap->pch_event_flag = 0; - return -ETIMEDOUT; - } - - if (adap->pch_event_flag & I2C_ERROR_MASK) { - pch_err(adap, "error bits set: %x\n", adap->pch_event_flag); - adap->pch_event_flag = 0; - return -EIO; - } - - adap->pch_event_flag = 0; - - return 0; -} - -/** * pch_i2c_getack() - to confirm ACK/NACK * @adap: Pointer to struct i2c_algo_pch_data. */ @@ -373,6 +341,40 @@ static void pch_i2c_stop(struct i2c_algo_pch_data *adap) pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START); } +static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap) +{ + long ret; + + ret = wait_event_timeout(pch_event, + (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); + if (!ret) { + pch_err(adap, "%s:wait-event timeout\n", __func__); + adap->pch_event_flag = 0; + pch_i2c_stop(adap); + pch_i2c_init(adap); + return -ETIMEDOUT; + } + + if (adap->pch_event_flag & I2C_ERROR_MASK) { + pch_err(adap, "Lost Arbitration\n"); + adap->pch_event_flag = 0; + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); + pch_i2c_init(adap); + return -EAGAIN; + } + + adap->pch_event_flag = 0; + + if (pch_i2c_getack(adap)) { + pch_dbg(adap, "Receive NACK for slave address" + "setting\n"); + return -EIO; + } + + return 0; +} + /** * pch_i2c_repstart() - generate repeated start condition in normal mode * @adap: Pointer to struct i2c_algo_pch_data. @@ -427,27 +429,12 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, if (first) pch_i2c_start(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - addr_8_lsb = (addr & I2C_ADDR_MSK); - iowrite32(addr_8_lsb, p + PCH_I2CDR); - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + addr_8_lsb = (addr & I2C_ADDR_MSK); + iowrite32(addr_8_lsb, p + PCH_I2CDR); } else { /* set 7 bit slave address and R/W bit as 0 */ iowrite32(addr << 1, p + PCH_I2CDR); @@ -455,44 +442,21 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, pch_i2c_start(adap); } - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; for (wrcount = 0; wrcount < length; ++wrcount) { /* write buffer value to I2C data register */ iowrite32(buf[wrcount], p + PCH_I2CDR); pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMCF_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT); + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); } /* check if this is the last message */ @@ -580,50 +544,21 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (first) pch_i2c_start(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - addr_8_lsb = (addr & I2C_ADDR_MSK); - iowrite32(addr_8_lsb, p + PCH_I2CDR); - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + addr_8_lsb = (addr & I2C_ADDR_MSK); + iowrite32(addr_8_lsb, p + PCH_I2CDR); + pch_i2c_restart(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - addr_2_msb |= I2C_RD; - iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, - p + PCH_I2CDR); - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + addr_2_msb |= I2C_RD; + iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR); } else { /* 7 address bits + R/W bit */ addr = (((addr) << 1) | (I2C_RD)); @@ -634,23 +569,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (first) pch_i2c_start(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; if (length == 0) { pch_i2c_stop(adap); @@ -669,18 +590,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (loop != 1) read_index++; - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave" - "address setting\n"); - return -EIO; - } - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } - + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; } /* end for */ pch_i2c_sendnack(adap); @@ -690,17 +602,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (length != 1) read_index++; - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave" - "address setting\n"); - return -EIO; - } - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; if (last) pch_i2c_stop(adap); @@ -790,7 +694,7 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, ret = mutex_lock_interruptible(&pch_mutex); if (ret) - return -ERESTARTSYS; + return ret; if (adap->p_adapter_info->pch_i2c_suspended) { mutex_unlock(&pch_mutex); @@ -909,7 +813,7 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, pch_adap->owner = THIS_MODULE; pch_adap->class = I2C_CLASS_HWMON; - strcpy(pch_adap->name, KBUILD_MODNAME); + strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name)); pch_adap->algo = &pch_algorithm; pch_adap->algo_data = &adap_info->pch_data[i]; @@ -963,7 +867,7 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev) pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address); for (i = 0; i < adap_info->ch_num; i++) - adap_info->pch_data[i].pch_base_address = 0; + adap_info->pch_data[i].pch_base_address = NULL; pci_set_drvdata(pdev, NULL); diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index c0330a41db03..e62d2d938628 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -190,12 +190,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; - /* - * If "dev->id" is negative we consider it as zero. - * The reason to do so is to avoid sysfs names that only make - * sense when there are multiple adapters. - */ - adap->nr = (pdev->id != -1) ? pdev->id : 0; + adap->nr = pdev->id; ret = i2c_bit_add_numbered_bus(adap); if (ret) goto err_add_bus; diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 56bce9a8bcbb..8d6b504d65c4 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -512,7 +512,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) } /* Setup i2c_imx driver structure */ - strcpy(i2c_imx->adapter.name, pdev->name); + strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name)); i2c_imx->adapter.owner = THIS_MODULE; i2c_imx->adapter.algo = &i2c_imx_algo; i2c_imx->adapter.dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c deleted file mode 100644 index 5d263f9014d6..000000000000 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * drivers/i2c/busses/i2c-ixp2000.c - * - * I2C adapter for IXP2000 systems using GPIOs for I2C bus - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com> - * Made generic by: Jeff Daly <jeffrey.daly@intel.com> - * - * Copyright (c) 2003-2004 MontaVista Software Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * From Jeff Daly: - * - * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any - * IXP2000 platform if it uses the HW GPIO in the same manner. Basically, - * SDA and SCL GPIOs have external pullups. Setting the respective GPIO to - * an input will make the signal a '1' via the pullup. Setting them to - * outputs will pull them down. - * - * The GPIOs are open drain signals and are used as configuration strap inputs - * during power-up so there's generally a buffer on the board that needs to be - * 'enabled' to drive the GPIOs. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/slab.h> - -#include <mach/hardware.h> /* Pick up IXP2000-specific bits */ -#include <mach/gpio-ixp2000.h> - -static inline int ixp2000_scl_pin(void *data) -{ - return ((struct ixp2000_i2c_pins*)data)->scl_pin; -} - -static inline int ixp2000_sda_pin(void *data) -{ - return ((struct ixp2000_i2c_pins*)data)->sda_pin; -} - - -static void ixp2000_bit_setscl(void *data, int val) -{ - int i = 5000; - - if (val) { - gpio_line_config(ixp2000_scl_pin(data), GPIO_IN); - while(!gpio_line_get(ixp2000_scl_pin(data)) && i--); - } else { - gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT); - } -} - -static void ixp2000_bit_setsda(void *data, int val) -{ - if (val) { - gpio_line_config(ixp2000_sda_pin(data), GPIO_IN); - } else { - gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT); - } -} - -static int ixp2000_bit_getscl(void *data) -{ - return gpio_line_get(ixp2000_scl_pin(data)); -} - -static int ixp2000_bit_getsda(void *data) -{ - return gpio_line_get(ixp2000_sda_pin(data)); -} - -struct ixp2000_i2c_data { - struct ixp2000_i2c_pins *gpio_pins; - struct i2c_adapter adapter; - struct i2c_algo_bit_data algo_data; -}; - -static int ixp2000_i2c_remove(struct platform_device *plat_dev) -{ - struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev); - - platform_set_drvdata(plat_dev, NULL); - - i2c_del_adapter(&drv_data->adapter); - - kfree(drv_data); - - return 0; -} - -static int ixp2000_i2c_probe(struct platform_device *plat_dev) -{ - int err; - struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data; - struct ixp2000_i2c_data *drv_data = - kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); - - if (!drv_data) - return -ENOMEM; - drv_data->gpio_pins = gpio; - - drv_data->algo_data.data = gpio; - drv_data->algo_data.setsda = ixp2000_bit_setsda; - drv_data->algo_data.setscl = ixp2000_bit_setscl; - drv_data->algo_data.getsda = ixp2000_bit_getsda; - drv_data->algo_data.getscl = ixp2000_bit_getscl; - drv_data->algo_data.udelay = 6; - drv_data->algo_data.timeout = HZ; - - strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, - sizeof(drv_data->adapter.name)); - drv_data->adapter.algo_data = &drv_data->algo_data, - - drv_data->adapter.dev.parent = &plat_dev->dev; - - gpio_line_config(gpio->sda_pin, GPIO_IN); - gpio_line_config(gpio->scl_pin, GPIO_IN); - gpio_line_set(gpio->scl_pin, 0); - gpio_line_set(gpio->sda_pin, 0); - - if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) { - dev_err(&plat_dev->dev, "Could not install, error %d\n", err); - kfree(drv_data); - return err; - } - - platform_set_drvdata(plat_dev, drv_data); - - return 0; -} - -static struct platform_driver ixp2000_i2c_driver = { - .probe = ixp2000_i2c_probe, - .remove = ixp2000_i2c_remove, - .driver = { - .name = "IXP2000-I2C", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(ixp2000_i2c_driver); - -MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>"); -MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:IXP2000-I2C"); - diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 206caacd30d7..b76731edbf10 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -64,6 +64,9 @@ struct mpc_i2c { struct i2c_adapter adap; int irq; u32 real_clk; +#ifdef CONFIG_PM + u8 fdr, dfsrr; +#endif }; struct mpc_i2c_divider { @@ -703,6 +706,30 @@ static int __devexit fsl_i2c_remove(struct platform_device *op) return 0; }; +#ifdef CONFIG_PM +static int mpc_i2c_suspend(struct device *dev) +{ + struct mpc_i2c *i2c = dev_get_drvdata(dev); + + i2c->fdr = readb(i2c->base + MPC_I2C_FDR); + i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); + + return 0; +} + +static int mpc_i2c_resume(struct device *dev) +{ + struct mpc_i2c *i2c = dev_get_drvdata(dev); + + writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); + writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); + + return 0; +} + +SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); +#endif + static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = { .setup = mpc_i2c_setup_512x, }; @@ -747,6 +774,9 @@ static struct platform_driver mpc_i2c_driver = { .owner = THIS_MODULE, .name = DRV_NAME, .of_match_table = mpc_i2c_of_match, +#ifdef CONFIG_PM + .pm = &mpc_i2c_pm_ops, +#endif }, }; diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 18068dee48f1..75194c579b6d 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -55,6 +55,7 @@ #include <linux/i2c-ocores.h> #include <linux/slab.h> #include <linux/io.h> +#include <linux/of_i2c.h> struct ocores_i2c { void __iomem *base; @@ -343,6 +344,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) if (pdata) { for (i = 0; i < pdata->num_devices; i++) i2c_new_device(&i2c->adap, pdata->devices + i); + } else { + of_i2c_register_devices(&i2c->adap); } return 0; diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 2adbf1a8fdea..675878f49f76 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -171,7 +171,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev) i2c->io_size = resource_size(res); i2c->irq = irq; - i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; + i2c->adap.nr = pdev->id; i2c->adap.owner = THIS_MODULE; snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564/PCA9665 at 0x%08lx", diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index f6733267fa9c..a997c7d3f95d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1131,11 +1131,6 @@ static int i2c_pxa_probe(struct platform_device *dev) spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); - /* - * If "dev->id" is negative we consider it as zero. - * The reason to do so is to avoid sysfs names that only make - * sense when there are multiple adapters. - */ i2c->adap.nr = dev->id; snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 737f7218a32c..fa0b13490873 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -44,8 +44,12 @@ #include <plat/regs-iic.h> #include <plat/iic.h> -/* i2c controller state */ +/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */ +#define QUIRK_S3C2440 (1 << 0) +#define QUIRK_HDMIPHY (1 << 1) +#define QUIRK_NO_GPIO (1 << 2) +/* i2c controller state */ enum s3c24xx_i2c_state { STATE_IDLE, STATE_START, @@ -54,14 +58,10 @@ enum s3c24xx_i2c_state { STATE_STOP }; -enum s3c24xx_i2c_type { - TYPE_S3C2410, - TYPE_S3C2440, -}; - struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; + unsigned int quirks; unsigned int suspended:1; struct i2c_msg *msg; @@ -88,26 +88,45 @@ struct s3c24xx_i2c { #endif }; -/* default platform data removed, dev should always carry data. */ +static struct platform_device_id s3c24xx_driver_ids[] = { + { + .name = "s3c2410-i2c", + .driver_data = 0, + }, { + .name = "s3c2440-i2c", + .driver_data = QUIRK_S3C2440, + }, { + .name = "s3c2440-hdmiphy-i2c", + .driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO, + }, { }, +}; +MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids); + +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_i2c_match[] = { + { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 }, + { .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 }, + { .compatible = "samsung,s3c2440-hdmiphy-i2c", + .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match); +#endif -/* s3c24xx_i2c_is2440() +/* s3c24xx_get_device_quirks * - * return true is this is an s3c2440 + * Get controller type either from device tree or platform device variant. */ -static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c) +static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(i2c->dev); - enum s3c24xx_i2c_type type; - -#ifdef CONFIG_OF - if (i2c->dev->of_node) - return of_device_is_compatible(i2c->dev->of_node, - "samsung,s3c2440-i2c"); -#endif + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node); + return (unsigned int)match->data; + } - type = platform_get_device_id(pdev)->driver_data; - return type == TYPE_S3C2440; + return platform_get_device_id(pdev)->driver_data; } /* s3c24xx_i2c_master_complete @@ -471,6 +490,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) unsigned long iicstat; int timeout = 400; + /* the timeout for HDMIPHY is reduced to 10 ms because + * the hangup is expected to happen, so waiting 400 ms + * causes only unnecessary system hangup + */ + if (i2c->quirks & QUIRK_HDMIPHY) + timeout = 10; + while (timeout-- > 0) { iicstat = readl(i2c->regs + S3C2410_IICSTAT); @@ -480,6 +506,15 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) msleep(1); } + /* hang-up of bus dedicated for HDMIPHY occurred, resetting */ + if (i2c->quirks & QUIRK_HDMIPHY) { + writel(0, i2c->regs + S3C2410_IICCON); + writel(0, i2c->regs + S3C2410_IICSTAT); + writel(0, i2c->regs + S3C2410_IICDS); + + return 0; + } + return -ETIMEDOUT; } @@ -676,7 +711,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) writel(iiccon, i2c->regs + S3C2410_IICCON); - if (s3c24xx_i2c_is2440(i2c)) { + if (i2c->quirks & QUIRK_S3C2440) { unsigned long sda_delay; if (pdata->sda_delay) { @@ -761,6 +796,9 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) { int idx, gpio, ret; + if (i2c->quirks & QUIRK_NO_GPIO) + return 0; + for (idx = 0; idx < 2; idx++) { gpio = of_get_gpio(i2c->dev->of_node, idx); if (!gpio_is_valid(gpio)) { @@ -785,6 +823,10 @@ free_gpio: static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c) { unsigned int idx; + + if (i2c->quirks & QUIRK_NO_GPIO) + return; + for (idx = 0; idx < 2; idx++) gpio_free(i2c->gpios[idx]); } @@ -906,6 +948,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) goto err_noclk; } + i2c->quirks = s3c24xx_get_device_quirks(pdev); if (pdata) memcpy(i2c->pdata, pdata, sizeof(*pdata)); else @@ -1110,28 +1153,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { /* device driver for platform bus bits */ -static struct platform_device_id s3c24xx_driver_ids[] = { - { - .name = "s3c2410-i2c", - .driver_data = TYPE_S3C2410, - }, { - .name = "s3c2440-i2c", - .driver_data = TYPE_S3C2440, - }, { }, -}; -MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids); - -#ifdef CONFIG_OF -static const struct of_device_id s3c24xx_i2c_match[] = { - { .compatible = "samsung,s3c2410-i2c" }, - { .compatible = "samsung,s3c2440-i2c" }, - {}, -}; -MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match); -#else -#define s3c24xx_i2c_match NULL -#endif - static struct platform_driver s3c24xx_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, @@ -1140,7 +1161,7 @@ static struct platform_driver s3c24xx_i2c_driver = { .owner = THIS_MODULE, .name = "s3c-i2c", .pm = S3C24XX_DEV_PM_OPS, - .of_match_table = s3c24xx_i2c_match, + .of_match_table = of_match_ptr(s3c24xx_i2c_match), }, }; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 675c9692d148..8110ca45f342 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -27,6 +27,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/of_i2c.h> #include <linux/err.h> #include <linux/pm_runtime.h> #include <linux/clk.h> @@ -653,6 +654,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) adap->dev.parent = &dev->dev; adap->retries = 5; adap->nr = dev->id; + adap->dev.of_node = dev->dev.of_node; strlcpy(adap->name, dev->name, sizeof(adap->name)); @@ -667,6 +669,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n", adap->nr, pd->bus_speed); + + of_i2c_register_devices(adap); return 0; err_all: @@ -710,11 +714,18 @@ static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { .runtime_resume = sh_mobile_i2c_runtime_nop, }; +static const struct of_device_id sh_mobile_i2c_dt_ids[] __devinitconst = { + { .compatible = "renesas,rmobile-iic", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids); + static struct platform_driver sh_mobile_i2c_driver = { .driver = { .name = "i2c-sh_mobile", .owner = THIS_MODULE, .pm = &sh_mobile_i2c_dev_pm_ops, + .of_match_table = sh_mobile_i2c_dt_ids, }, .probe = sh_mobile_i2c_probe, .remove = sh_mobile_i2c_remove, diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 55e5ea62ccee..8b2e555a9563 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -401,8 +401,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) disable_irq_nosync(i2c_dev->irq); i2c_dev->irq_disabled = 1; } - - complete(&i2c_dev->msg_complete); goto err; } @@ -411,7 +409,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) i2c_dev->msg_err |= I2C_ERR_NO_ACK; if (status & I2C_INT_ARBITRATION_LOST) i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST; - complete(&i2c_dev->msg_complete); goto err; } @@ -429,14 +426,14 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ); } + i2c_writel(i2c_dev, status, I2C_INT_STATUS); + if (i2c_dev->is_dvc) + dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); + if (status & I2C_INT_PACKET_XFER_COMPLETE) { BUG_ON(i2c_dev->msg_buf_remaining); complete(&i2c_dev->msg_complete); } - - i2c_writel(i2c_dev, status, I2C_INT_STATUS); - if (i2c_dev->is_dvc) - dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); return IRQ_HANDLED; err: /* An error occurred, mask all interrupts */ @@ -446,6 +443,8 @@ err: i2c_writel(i2c_dev, status, I2C_INT_STATUS); if (i2c_dev->is_dvc) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); + + complete(&i2c_dev->msg_complete); return IRQ_HANDLED; } @@ -476,12 +475,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, packet_header = msg->len - 1; i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); - packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT; - packet_header |= I2C_HEADER_IE_ENABLE; + packet_header = I2C_HEADER_IE_ENABLE; if (!stop) packet_header |= I2C_HEADER_REPEAT_START; - if (msg->flags & I2C_M_TEN) + if (msg->flags & I2C_M_TEN) { + packet_header |= msg->addr; packet_header |= I2C_HEADER_10BIT_ADDR; + } else { + packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT; + } if (msg->flags & I2C_M_IGNORE_NAK) packet_header |= I2C_HEADER_CONT_ON_NAK; if (msg->flags & I2C_M_RD) @@ -557,7 +559,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], static u32 tegra_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; } static const struct i2c_algorithm tegra_i2c_algo = { diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index f585aead50cc..eec20db6246f 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c @@ -104,13 +104,8 @@ static int i2c_versatile_probe(struct platform_device *dev) i2c->algo = i2c_versatile_algo; i2c->algo.data = i2c; - if (dev->id >= 0) { - /* static bus numbering */ - i2c->adap.nr = dev->id; - ret = i2c_bit_add_numbered_bus(&i2c->adap); - } else - /* dynamic bus numbering */ - ret = i2c_bit_add_bus(&i2c->adap); + i2c->adap.nr = dev->id; + ret = i2c_bit_add_numbered_bus(&i2c->adap); if (ret >= 0) { platform_set_drvdata(dev, i2c); of_i2c_register_devices(&i2c->adap); diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 2bded7647ef2..641d0e5e3303 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -40,6 +40,7 @@ #include <linux/i2c-xiic.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/of_i2c.h> #define DRIVER_NAME "xiic-i2c" @@ -705,8 +706,6 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev) goto resource_missing; pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data; - if (!pdata) - return -EINVAL; i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); if (!i2c) @@ -730,6 +729,7 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev) i2c->adap = xiic_adapter; i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = pdev->dev.of_node; xiic_reinit(i2c); @@ -748,9 +748,13 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev) goto add_adapter_failed; } - /* add in known devices to the bus */ - for (i = 0; i < pdata->num_devices; i++) - i2c_new_device(&i2c->adap, pdata->devices + i); + if (pdata) { + /* add in known devices to the bus */ + for (i = 0; i < pdata->num_devices; i++) + i2c_new_device(&i2c->adap, pdata->devices + i); + } + + of_i2c_register_devices(&i2c->adap); return 0; @@ -795,12 +799,21 @@ static int __devexit xiic_i2c_remove(struct platform_device* pdev) return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id xiic_of_match[] __devinitconst = { + { .compatible = "xlnx,xps-iic-2.00.a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, xiic_of_match); +#endif + static struct platform_driver xiic_i2c_driver = { .probe = xiic_i2c_probe, .remove = __devexit_p(xiic_i2c_remove), .driver = { .owner = THIS_MODULE, .name = DRIVER_NAME, + .of_match_table = of_match_ptr(xiic_of_match), }, }; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index feb7dc359186..a6ad32bc0a96 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -772,6 +772,23 @@ struct device_type i2c_adapter_type = { }; EXPORT_SYMBOL_GPL(i2c_adapter_type); +/** + * i2c_verify_adapter - return parameter as i2c_adapter or NULL + * @dev: device, probably from some driver model iterator + * + * When traversing the driver model tree, perhaps using driver model + * iterators like @device_for_each_child(), you can't assume very much + * about the nodes you find. Use this function to avoid oopses caused + * by wrongly treating some non-I2C device as an i2c_adapter. + */ +struct i2c_adapter *i2c_verify_adapter(struct device *dev) +{ + return (dev->type == &i2c_adapter_type) + ? to_i2c_adapter(dev) + : NULL; +} +EXPORT_SYMBOL(i2c_verify_adapter); + #ifdef CONFIG_I2C_COMPAT static struct class_compat *i2c_adapter_compat_class; #endif diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index d7a4833be416..1038c381aea5 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -24,6 +24,8 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/i2c-mux.h> +#include <linux/of.h> +#include <linux/of_i2c.h> /* multiplexer per channel data */ struct i2c_mux_priv { @@ -31,11 +33,11 @@ struct i2c_mux_priv { struct i2c_algorithm algo; struct i2c_adapter *parent; - void *mux_dev; /* the mux chip/device */ + void *mux_priv; /* the mux chip/device */ u32 chan_id; /* the channel id */ - int (*select)(struct i2c_adapter *, void *mux_dev, u32 chan_id); - int (*deselect)(struct i2c_adapter *, void *mux_dev, u32 chan_id); + int (*select)(struct i2c_adapter *, void *mux_priv, u32 chan_id); + int (*deselect)(struct i2c_adapter *, void *mux_priv, u32 chan_id); }; static int i2c_mux_master_xfer(struct i2c_adapter *adap, @@ -47,11 +49,11 @@ static int i2c_mux_master_xfer(struct i2c_adapter *adap, /* Switch to the right mux port and perform the transfer. */ - ret = priv->select(parent, priv->mux_dev, priv->chan_id); + ret = priv->select(parent, priv->mux_priv, priv->chan_id); if (ret >= 0) ret = parent->algo->master_xfer(parent, msgs, num); if (priv->deselect) - priv->deselect(parent, priv->mux_dev, priv->chan_id); + priv->deselect(parent, priv->mux_priv, priv->chan_id); return ret; } @@ -67,12 +69,12 @@ static int i2c_mux_smbus_xfer(struct i2c_adapter *adap, /* Select the right mux port and perform the transfer. */ - ret = priv->select(parent, priv->mux_dev, priv->chan_id); + ret = priv->select(parent, priv->mux_priv, priv->chan_id); if (ret >= 0) ret = parent->algo->smbus_xfer(parent, addr, flags, read_write, command, size, data); if (priv->deselect) - priv->deselect(parent, priv->mux_dev, priv->chan_id); + priv->deselect(parent, priv->mux_priv, priv->chan_id); return ret; } @@ -87,7 +89,8 @@ static u32 i2c_mux_functionality(struct i2c_adapter *adap) } struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, - void *mux_dev, u32 force_nr, u32 chan_id, + struct device *mux_dev, + void *mux_priv, u32 force_nr, u32 chan_id, int (*select) (struct i2c_adapter *, void *, u32), int (*deselect) (struct i2c_adapter *, @@ -102,7 +105,7 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, /* Set up private adapter data */ priv->parent = parent; - priv->mux_dev = mux_dev; + priv->mux_priv = mux_priv; priv->chan_id = chan_id; priv->select = select; priv->deselect = deselect; @@ -124,6 +127,25 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, priv->adap.algo_data = priv; priv->adap.dev.parent = &parent->dev; + /* + * Try to populate the mux adapter's of_node, expands to + * nothing if !CONFIG_OF. + */ + if (mux_dev->of_node) { + struct device_node *child; + u32 reg; + + for_each_child_of_node(mux_dev->of_node, child) { + ret = of_property_read_u32(child, "reg", ®); + if (ret) + continue; + if (chan_id == reg) { + priv->adap.dev.of_node = child; + break; + } + } + } + if (force_nr) { priv->adap.nr = force_nr; ret = i2c_add_numbered_adapter(&priv->adap); @@ -141,6 +163,8 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, dev_info(&parent->dev, "Added multiplexed i2c bus %d\n", i2c_adapter_id(&priv->adap)); + of_i2c_register_devices(&priv->adap); + return &priv->adap; } EXPORT_SYMBOL_GPL(i2c_add_mux_adapter); diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 90b7a0163899..beb2491db274 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -15,7 +15,7 @@ config I2C_MUX_GPIO through GPIO pins. This driver can also be built as a module. If so, the module - will be called gpio-i2cmux. + will be called i2c-mux-gpio. config I2C_MUX_PCA9541 tristate "NXP PCA9541 I2C Master Selector" @@ -25,7 +25,7 @@ config I2C_MUX_PCA9541 I2C Master Selector. This driver can also be built as a module. If so, the module - will be called pca9541. + will be called i2c-mux-pca9541. config I2C_MUX_PCA954x tristate "Philips PCA954x I2C Mux/switches" @@ -35,6 +35,6 @@ config I2C_MUX_PCA954x I2C mux/switch devices. This driver can also be built as a module. If so, the module - will be called pca954x. + will be called i2c-mux-pca954x. endmenu diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile index 4640436ea61f..5826249b29ca 100644 --- a/drivers/i2c/muxes/Makefile +++ b/drivers/i2c/muxes/Makefile @@ -1,8 +1,8 @@ # # Makefile for multiplexer I2C chip drivers. -obj-$(CONFIG_I2C_MUX_GPIO) += gpio-i2cmux.o -obj-$(CONFIG_I2C_MUX_PCA9541) += pca9541.o -obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o +obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o +obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o +obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git a/drivers/i2c/muxes/gpio-i2cmux.c b/drivers/i2c/muxes/i2c-mux-gpio.c index e5fa695eb0fa..68b1f8ec3436 100644 --- a/drivers/i2c/muxes/gpio-i2cmux.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -10,7 +10,7 @@ #include <linux/i2c.h> #include <linux/i2c-mux.h> -#include <linux/gpio-i2cmux.h> +#include <linux/i2c-mux-gpio.h> #include <linux/platform_device.h> #include <linux/init.h> #include <linux/module.h> @@ -20,10 +20,10 @@ struct gpiomux { struct i2c_adapter *parent; struct i2c_adapter **adap; /* child busses */ - struct gpio_i2cmux_platform_data data; + struct i2c_mux_gpio_platform_data data; }; -static void gpiomux_set(const struct gpiomux *mux, unsigned val) +static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val) { int i; @@ -31,28 +31,28 @@ static void gpiomux_set(const struct gpiomux *mux, unsigned val) gpio_set_value(mux->data.gpios[i], val & (1 << i)); } -static int gpiomux_select(struct i2c_adapter *adap, void *data, u32 chan) +static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan) { struct gpiomux *mux = data; - gpiomux_set(mux, mux->data.values[chan]); + i2c_mux_gpio_set(mux, mux->data.values[chan]); return 0; } -static int gpiomux_deselect(struct i2c_adapter *adap, void *data, u32 chan) +static int i2c_mux_gpio_deselect(struct i2c_adapter *adap, void *data, u32 chan) { struct gpiomux *mux = data; - gpiomux_set(mux, mux->data.idle); + i2c_mux_gpio_set(mux, mux->data.idle); return 0; } -static int __devinit gpiomux_probe(struct platform_device *pdev) +static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev) { struct gpiomux *mux; - struct gpio_i2cmux_platform_data *pdata; + struct i2c_mux_gpio_platform_data *pdata; struct i2c_adapter *parent; int (*deselect) (struct i2c_adapter *, void *, u32); unsigned initial_state; @@ -86,16 +86,16 @@ static int __devinit gpiomux_probe(struct platform_device *pdev) goto alloc_failed2; } - if (pdata->idle != GPIO_I2CMUX_NO_IDLE) { + if (pdata->idle != I2C_MUX_GPIO_NO_IDLE) { initial_state = pdata->idle; - deselect = gpiomux_deselect; + deselect = i2c_mux_gpio_deselect; } else { initial_state = pdata->values[0]; deselect = NULL; } for (i = 0; i < pdata->n_gpios; i++) { - ret = gpio_request(pdata->gpios[i], "gpio-i2cmux"); + ret = gpio_request(pdata->gpios[i], "i2c-mux-gpio"); if (ret) goto err_request_gpio; gpio_direction_output(pdata->gpios[i], @@ -105,8 +105,8 @@ static int __devinit gpiomux_probe(struct platform_device *pdev) for (i = 0; i < pdata->n_values; i++) { u32 nr = pdata->base_nr ? (pdata->base_nr + i) : 0; - mux->adap[i] = i2c_add_mux_adapter(parent, mux, nr, i, - gpiomux_select, deselect); + mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr, i, + i2c_mux_gpio_select, deselect); if (!mux->adap[i]) { ret = -ENODEV; dev_err(&pdev->dev, "Failed to add adapter %d\n", i); @@ -137,7 +137,7 @@ alloc_failed: return ret; } -static int __devexit gpiomux_remove(struct platform_device *pdev) +static int __devexit i2c_mux_gpio_remove(struct platform_device *pdev) { struct gpiomux *mux = platform_get_drvdata(pdev); int i; @@ -156,18 +156,18 @@ static int __devexit gpiomux_remove(struct platform_device *pdev) return 0; } -static struct platform_driver gpiomux_driver = { - .probe = gpiomux_probe, - .remove = __devexit_p(gpiomux_remove), +static struct platform_driver i2c_mux_gpio_driver = { + .probe = i2c_mux_gpio_probe, + .remove = __devexit_p(i2c_mux_gpio_remove), .driver = { .owner = THIS_MODULE, - .name = "gpio-i2cmux", + .name = "i2c-mux-gpio", }, }; -module_platform_driver(gpiomux_driver); +module_platform_driver(i2c_mux_gpio_driver); MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver"); MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:gpio-i2cmux"); +MODULE_ALIAS("platform:i2c-mux-gpio"); diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c index e0df9b6c66b3..8aacde1516ac 100644 --- a/drivers/i2c/muxes/pca9541.c +++ b/drivers/i2c/muxes/i2c-mux-pca9541.c @@ -353,7 +353,8 @@ static int pca9541_probe(struct i2c_client *client, force = 0; if (pdata) force = pdata->modes[0].adap_id; - data->mux_adap = i2c_add_mux_adapter(adap, client, force, 0, + data->mux_adap = i2c_add_mux_adapter(adap, &client->dev, client, + force, 0, pca9541_select_chan, pca9541_release_chan); diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 0e37ef27aa12..f2dfe0d8fcce 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -226,7 +226,7 @@ static int pca954x_probe(struct i2c_client *client, } data->virt_adaps[num] = - i2c_add_mux_adapter(adap, client, + i2c_add_mux_adapter(adap, &client->dev, client, force, num, pca954x_select_chan, (pdata && pdata->modes[num].deselect_on_exit) ? pca954x_deselect_mux : NULL); diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index f37fbeb66a44..1e173f357674 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -90,8 +90,22 @@ struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) if (!dev) return NULL; - return to_i2c_client(dev); + return i2c_verify_client(dev); } EXPORT_SYMBOL(of_find_i2c_device_by_node); +/* must call put_device() when done with returned i2c_adapter device */ +struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, node, + of_dev_node_match); + if (!dev) + return NULL; + + return i2c_verify_adapter(dev); +} +EXPORT_SYMBOL(of_find_i2c_adapter_by_node); + MODULE_LICENSE("GPL"); diff --git a/include/linux/gpio-i2cmux.h b/include/linux/i2c-mux-gpio.h index 4a333bb0bd0d..a36343a37ebc 100644 --- a/include/linux/gpio-i2cmux.h +++ b/include/linux/i2c-mux-gpio.h @@ -1,5 +1,5 @@ /* - * gpio-i2cmux interface to platform code + * i2c-mux-gpio interface to platform code * * Peter Korsgaard <peter.korsgaard@barco.com> * @@ -8,14 +8,14 @@ * published by the Free Software Foundation. */ -#ifndef _LINUX_GPIO_I2CMUX_H -#define _LINUX_GPIO_I2CMUX_H +#ifndef _LINUX_I2C_MUX_GPIO_H +#define _LINUX_I2C_MUX_GPIO_H /* MUX has no specific idle mode */ -#define GPIO_I2CMUX_NO_IDLE ((unsigned)-1) +#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1) /** - * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux + * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio * @parent: Parent I2C bus adapter number * @base_nr: Base I2C bus number to number adapters from or zero for dynamic * @values: Array of bitmasks of GPIO settings (low/high) for each @@ -25,7 +25,7 @@ * @n_gpios: Number of GPIOs used to control MUX * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used */ -struct gpio_i2cmux_platform_data { +struct i2c_mux_gpio_platform_data { int parent; int base_nr; const unsigned *values; @@ -35,4 +35,4 @@ struct gpio_i2cmux_platform_data { unsigned idle; }; -#endif /* _LINUX_GPIO_I2CMUX_H */ +#endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h index 747f0cde4164..c79083830014 100644 --- a/include/linux/i2c-mux.h +++ b/include/linux/i2c-mux.h @@ -34,7 +34,8 @@ * mux control. */ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, - void *mux_dev, u32 force_nr, u32 chan_id, + struct device *mux_dev, + void *mux_priv, u32 force_nr, u32 chan_id, int (*select) (struct i2c_adapter *, void *mux_dev, u32 chan_id), int (*deselect) (struct i2c_adapter *, diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 195d8b3d9cfb..b66cb601435f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -232,6 +232,7 @@ struct i2c_client { #define to_i2c_client(d) container_of(d, struct i2c_client, dev) extern struct i2c_client *i2c_verify_client(struct device *dev); +extern struct i2c_adapter *i2c_verify_adapter(struct device *dev); static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) { diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h index 0efe8d465f55..1cb775f8e663 100644 --- a/include/linux/of_i2c.h +++ b/include/linux/of_i2c.h @@ -20,6 +20,10 @@ extern void of_i2c_register_devices(struct i2c_adapter *adap); /* must call put_device() when done with returned i2c_client device */ extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node); +/* must call put_device() when done with returned i2c_adapter device */ +extern struct i2c_adapter *of_find_i2c_adapter_by_node( + struct device_node *node); + #else static inline void of_i2c_register_devices(struct i2c_adapter *adap) { |