diff options
64 files changed, 3274 insertions, 433 deletions
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml index d131759ccaf3..021d33cb3dd6 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -22,6 +22,7 @@ properties: patternProperties: "^.*_(clk|rst)$": type: object + unevaluatedProperties: false properties: compatible: @@ -38,6 +39,45 @@ patternProperties: properties: compatible: contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: const: allwinner,sun6i-a31-apb0-clk then: diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml index aa5e683b236c..01f4f5210574 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -22,6 +22,7 @@ properties: patternProperties: "^.*(clk|rst|codec).*$": type: object + unevaluatedProperties: false properties: compatible: @@ -40,6 +41,15 @@ patternProperties: properties: compatible: contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: const: allwinner,sun8i-a23-apb0-clk then: diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml new file mode 100644 index 000000000000..1689b986f441 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed System Control Unit + +description: + The Aspeed System Control Unit manages the global behaviour of the SoC, + configuring elements such as clocks, pinmux, and reset. + +maintainers: + - Joel Stanley <joel@jms.id.au> + - Andrew Jeffery <andrew@aj.id.au> + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-scu + - aspeed,ast2500-scu + - aspeed,ast2600-scu + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +patternProperties: + '^p2a-control@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt + type: object + + '^pinctrl(@[0-9a-f]+)?$': + oneOf: + - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml + + '^interrupt-controller@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt + type: object + + '^silicon-id@[0-9a-f]+$': + description: Unique hardware silicon identifiers within the SoC + type: object + additionalProperties: false + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-silicon-id + - aspeed,ast2500-silicon-id + - aspeed,ast2600-silicon-id + - const: aspeed,silicon-id + + reg: + description: + The reg should be the unique silicon id register, and not backwards + compatible one in eg. the 2600. + minItems: 1 + items: + - description: silicon id information registers + - description: unique chip id registers + +required: + - compatible + - reg + - ranges + - '#address-cells' + - '#size-cells' + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + syscon@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e6e2000 0x1000>; + + silicon-id@7c { + compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; + reg = <0x7c 0x4>, <0x150 0x8>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt deleted file mode 100644 index 857ee33f7329..000000000000 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ /dev/null @@ -1,48 +0,0 @@ -The Aspeed System Control Unit manages the global behaviour of the SoC, -configuring elements such as clocks, pinmux, and reset. - -Required properties: -- compatible: One of: - "aspeed,ast2400-scu", "syscon", "simple-mfd" - "aspeed,ast2500-scu", "syscon", "simple-mfd" - -- reg: contains the offset and length of the SCU memory region -- #clock-cells: should be set to <1> - the system controller is also a - clock provider -- #reset-cells: should be set to <1> - the system controller is also a - reset line provider - -Example: - -syscon: syscon@1e6e2000 { - compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - #clock-cells = <1>; - #reset-cells = <1>; -}; - -Silicon ID ------------------ - -Families have unique hardware silicon identifiers within the SoC. - -Required properties: - - - compatible: "aspeed,silicon-id" or: - "aspeed,ast2400-silicon-id" or - "aspeed,ast2500-silicon-id" or - "aspeed,ast2600-silicon-id" - - - reg: offset and length of the silicon id information - optionally, a second offset and length describes the unique chip id - - The reg should be the unique silicon id register, and - not backwards compatible one in eg. the 2600. - -Example: - - -silicon-id@7c { - compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; - reg = <0x7c 0x4 0x150 0x8>; -}; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml index ad285cb480c9..86f7341eb7e1 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -144,6 +144,7 @@ properties: CODECs digital core if not being provided by an internal regulator. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -161,6 +162,7 @@ properties: CODECs MICVDD. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -177,6 +179,7 @@ properties: Initialisation data for the MIC1VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -202,6 +205,7 @@ properties: Initialisation data for the MIC2VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -228,6 +232,7 @@ properties: the CODECs analog and 1.8V digital supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index d71933460e90..e8e74e91070c 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -71,8 +71,9 @@ properties: regulators: type: object + additionalProperties: false patternProperties: - "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": $ref: /schemas/regulator/regulator.yaml unevaluatedProperties: false @@ -112,7 +113,7 @@ examples: }; regulators { - regulator-bcore1 { + bcore1 { regulator-name = "BCORE1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1570000>; @@ -120,7 +121,7 @@ examples: regulator-max-microamp = <2000000>; regulator-boot-on; }; - regulator-ldo11 { + ldo11 { regulator-name = "LDO_11"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3600000>; diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 5e0fe3ebe1d2..acb9c54942d9 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -46,6 +46,7 @@ properties: adc: type: object + additionalProperties: false description: Optional hardware monitoring module properties: @@ -59,8 +60,9 @@ properties: const: 0 patternProperties: - "^channel@[0-9]+$": + "^channel@[0-9a-f]+$": type: object + additionalProperties: false description: | Properties for a single ADC which can report cooked values (i.e. temperature sensor based on thermister), raw values @@ -113,6 +115,7 @@ properties: patternProperties: "^fan-controller@[0-9a-f]+$": type: object + additionalProperties: false description: Optional fan controller properties: diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml index 52edd1bf549f..995e96ee7445 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -39,6 +39,7 @@ properties: extcon: type: object + additionalProperties: false properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml index f30f96bbff43..2e2a2a86b57d 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -32,6 +32,7 @@ properties: motor-driver: type: object + additionalProperties: false properties: compatible: const: maxim,max77843-haptic diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml new file mode 100644 index 000000000000..250484d59ecd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 SubPMIC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + MT6370 is a highly-integrated smart power management IC, which includes a + single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & + Power Delivery (PD) controller, dual flash LED current sources, a RGB LED + driver, a backlight WLED driver, a display bias driver and a general LDO for + portable devices. + +properties: + compatible: + const: mediatek,mt6370 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + adc: + type: object + description: | + Provides 9 channels for system monitoring, including VBUSDIV5 (lower + accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower + measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC. + + properties: + compatible: + const: mediatek,mt6370-adc + + "#io-channel-cells": + const: 1 + + required: + - compatible + - "#io-channel-cells" + + backlight: + type: object + $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml# + + charger: + type: object + $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml# + + tcpc: + type: object + $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml# + + indicator: + type: object + $ref: /schemas/leds/mediatek,mt6370-indicator.yaml# + + flashlight: + type: object + $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml# + + regulators: + type: object + description: | + List all supported regulators, which support the control for DisplayBias + voltages and one general purpose LDO which commonly used to drive the + vibrator. + + patternProperties: + "^(dsvbst|vibldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + "^(dsvpos|dsvneg)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + - adc + - backlight + - indicator + - tcpc + - charger + - flashlight + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6370"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + mt6370_adc: adc { + compatible = "mediatek,mt6370-adc"; + #io-channel-cells = <1>; + }; + + backlight { + compatible = "mediatek,mt6370-backlight"; + mediatek,bled-channel-use = /bits/ 8 <15>; + }; + + charger { + compatible = "mediatek,mt6370-charger"; + interrupts = <48>, <68>, <6>; + interrupt-names = "attach_i", "uvp_d_evt", "mivr"; + io-channels = <&mt6370_adc MT6370_CHAN_IBUS>; + + mt6370_otg_vbus: usb-otg-vbus-regulator { + regulator-name = "mt6370-usb-otg-vbus"; + regulator-min-microvolt = <4350000>; + regulator-max-microvolt = <5800000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; + + indicator { + compatible = "mediatek,mt6370-indicator"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <6000>; + }; + }; + + flashlight { + compatible = "mediatek,mt6370-flashlight"; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + led-sources = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + led@1 { + reg = <1>; + led-sources = <1>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + }; + + tcpc { + compatible = "mediatek,mt6370-tcpc"; + interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&mt6370_otg_vbus>; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + + regulators { + dsvbst { + regulator-name = "mt6370-dsv-vbst"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6200000>; + }; + dsvpos { + regulator-name = "mt6370-dsv-vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvneg { + regulator-name = "mt6370-dsv-vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + vibldo { + regulator-name = "mt6370-vib-ldo"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <4000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml new file mode 100644 index 000000000000..c8c4812fffe2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Control Processor System + +maintainers: + - MandyJH Liu <mandyjh.liu@mediatek.com> + +description: + MediaTek System Control Processor System (SCPSYS) has several + power management tasks. The tasks include MTCMOS power + domain control, thermal measurement, DVFS, etc. + +properties: + compatible: + items: + - enum: + - mediatek,mt8167-scpsys + - mediatek,mt8173-scpsys + - mediatek,mt8183-scpsys + - mediatek,mt8186-scpsys + - mediatek,mt8192-scpsys + - mediatek,mt8195-scpsys + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + power-controller: + $ref: /schemas/power/mediatek,power-controller.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + syscon@10006000 { + compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd"; + reg = <0x10006000 0x100>; + + spm: power-controller { + compatible = "mediatek,mt8195-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* sample of power domain nodes */ + power-domain@MT8195_POWER_DOMAIN_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_PCIE_PHY>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 65cbc6dee545..6a3e3ede1ede 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -33,19 +33,22 @@ properties: compatible: items: - enum: - - qcom,pm660 - - qcom,pm660l - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 + - qcom,pm660 + - qcom,pm660l + - qcom,pm7250b - qcom,pm7325 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 - qcom,pm8019 + - qcom,pm8028 - qcom,pm8110 - qcom,pm8150 - qcom,pm8150b + - qcom,pm8150c - qcom,pm8150l - qcom,pm8226 - qcom,pm8350 @@ -56,6 +59,7 @@ properties: - qcom,pm8916 - qcom,pm8941 - qcom,pm8950 + - qcom,pm8953 - qcom,pm8994 - qcom,pm8998 - qcom,pma8084 @@ -64,8 +68,10 @@ properties: - qcom,pmi8962 - qcom,pmi8994 - qcom,pmi8998 + - qcom,pmk8002 - qcom,pmk8350 - qcom,pmm8155au + - qcom,pmp8074 - qcom,pmr735a - qcom,pmr735b - qcom,pms405 @@ -90,7 +96,7 @@ properties: regulators: type: object - $ref: /schemas/regulator/regulator.yaml# + $ref: /schemas/regulator/qcom,spmi-regulator.yaml# patternProperties: "^adc@[0-9a-f]+$": @@ -99,7 +105,7 @@ patternProperties: "^adc-tm@[0-9a-f]+$": type: object - $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + # ref depends on compatible, see allOf below "^audio-codec@[0-9a-f]+$": type: object @@ -146,6 +152,22 @@ required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998 + then: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml# + else: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + additionalProperties: false examples: @@ -188,3 +210,87 @@ examples: }; }; }; + + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/iio/qcom,spmi-vadc.h> + #include <dt-bindings/spmi/spmi.h> + + pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + + adc-chan@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + + pm6150_gpio: gpios@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index d3c25daa995e..b12809b5cc22 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -15,31 +15,27 @@ description: properties: compatible: - oneOf: - - items: - - enum: - - qcom,msm8998-tcsr - - qcom,qcs404-tcsr - - qcom,sc7180-tcsr - - qcom,sc7280-tcsr - - qcom,sdm630-tcsr - - qcom,sdm845-tcsr - - qcom,sm8150-tcsr - - qcom,tcsr-apq8064 - - qcom,tcsr-apq8084 - - qcom,tcsr-ipq8064 - - qcom,tcsr-mdm9615 - - qcom,tcsr-msm8660 - - qcom,tcsr-msm8916 - - qcom,tcsr-msm8953 - - qcom,tcsr-msm8960 - - qcom,tcsr-msm8974 - - qcom,tcsr-msm8996 - - const: syscon - - items: - - const: qcom,tcsr-ipq6018 - - const: syscon - - const: simple-mfd + items: + - enum: + - qcom,msm8998-tcsr + - qcom,qcs404-tcsr + - qcom,sc7180-tcsr + - qcom,sc7280-tcsr + - qcom,sdm630-tcsr + - qcom,sdm845-tcsr + - qcom,sm8150-tcsr + - qcom,tcsr-apq8064 + - qcom,tcsr-apq8084 + - qcom,tcsr-ipq6018 + - qcom,tcsr-ipq8064 + - qcom,tcsr-mdm9615 + - qcom,tcsr-msm8660 + - qcom,tcsr-msm8916 + - qcom,tcsr-msm8953 + - qcom,tcsr-msm8960 + - qcom,tcsr-msm8974 + - qcom,tcsr-msm8996 + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml new file mode 100644 index 000000000000..f73b8b25d7d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5120 PMIC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT5120 provides four high-efficiency buck converters and one LDO voltage + regulator. The device is targeted at providingthe processor voltage, memory, + I/O, and peripheral rails in home entertainment devices. The I2C interface is + used for dynamic voltage scaling of the processor voltage, power rails on/off + sequence control, operation mode selection. + +properties: + compatible: + enum: + - richtek,rt5120 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + wakeup-source: true + + richtek,enable-undervolt-hiccup: + type: boolean + description: | + If used, under voltage protection trigger hiccup behavior, else latchup as + default + + richtek,enable-overvolt-hiccup: + type: boolean + description: + Like as 'enable-uv-hiccup', it configures over voltage protection to + hiccup, else latchup as default + + vin1-supply: + description: phandle for buck1 input power source + + vin2-supply: + description: phandle for buck2 input power source + + vin3-supply: + description: phandle for buck3 input power source + + vin4-supply: + description: phandle for buck4 input power source + + vinldo-supply: + description: phandle for ldo input power source + + regulators: + type: object + + patternProperties: + "^buck[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-allowed-modes: + description: | + Used to specify the allowed buck converter operating mode + mode mapping: + 0: auto mode + 1: force pwm mode + items: + enum: [0, 1] + + "^(ldo|exten)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + + powerkey: + type: object + description: + PON key that connected to RT5120 PMIC. + + properties: + compatible: + enum: + - richtek,rt5120-pwrkey + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + - interrupt-controller + - regulators + - powerkey + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "richtek,rt5120"; + reg = <0x62>; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + wakeup-source; + + regulators { + buck1 { + regulator-name = "rt5120-buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-allowed-modes = <0 1>; + regulator-boot-on; + }; + buck2 { + regulator-name = "rt5120-buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck3 { + regulator-name = "rt5120-buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck4 { + regulator-name = "rt5120-buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + ldo { + regulator-name = "rt5120-ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + exten { + regulator-name = "rt5120-exten"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + powerkey { + compatible = "richtek,rt5120-pwrkey"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml index bfc1720adc43..935e17099213 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -87,6 +87,7 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": type: object + unevaluatedProperties: false $ref: ../regulator/regulator.yaml# unevaluatedProperties: false @@ -111,12 +112,56 @@ properties: additional properties are required for the codec, this node can be omitted. type: object + additionalProperties: false properties: rockchip,mic-in-differential: type: boolean description: Describes if the microphone uses differential mode. + charger: + description: | + The child node for the charger to hold additional properties. If a + battery is not in use, this node can be omitted. + type: object + properties: + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid + value for: + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, + voltage-min-design-microvolt, + and a valid ocv-capacity table. + + rockchip,resistor-sense-micro-ohms: + description: | + Value in microohms of the battery sense resistor. This value is + used by the driver to set the correct divisor value to translate + ADC readings into the proper units of measure. + enum: [10000, 20000] + + rockchip,sleep-enter-current-microamp: + description: | + Value in microamps of the sleep enter current for the charger. + Value is used by the driver to calibrate the relax threshold. + + rockchip,sleep-filter-current-microamp: + description: + Value in microamps of the sleep filter current for the charger. + Value is used by the driver to derive the sleep sample current. + + required: + - monitored-battery + - rockchip,resistor-sense-micro-ohms + - rockchip,sleep-enter-current-microamp + - rockchip,sleep-filter-current-microamp + + additionalProperties: false + allOf: - if: properties: @@ -323,6 +368,13 @@ examples: }; }; + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; }; diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml index 6de74c701635..ee0be32ac020 100644 --- a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -42,6 +42,7 @@ properties: vcom: type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false description: The regulator for the compenstation voltage. Enabling/disabling this enables/disables the entire device. diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml new file mode 100644 index 000000000000..996bd4a17ca3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc System Global Register + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: + Unisoc system global registers provide register map + for clocks and some multimedia modules of the SoC. + +properties: + compatible: + items: + - const: sprd,ums512-glbregs + - const: syscon + - const: simple-mfd + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^clock-controller@[0-9a-f]+$": + type: object + $ref: /schemas/clock/sprd,ums512-clk.yaml# + description: + Clock controller for the SoC clocks. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ap_apb_regs: syscon@71000000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x71000000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x71000000 0x3000>; + + clock-controller@0 { + compatible = "sprd,ums512-apahb-gate"; + reg = <0x0 0x2000>; + #clock-cells = <1>; + }; + }; + + - | + ap_intc5_regs: syscon@32360000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x32360000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index a58f08aa430d..d950dd5d48bd 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -46,6 +46,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -60,6 +61,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible: @@ -70,6 +72,7 @@ properties: timer: type: object + additionalProperties: false properties: compatible: @@ -81,6 +84,7 @@ properties: patternProperties: "^trigger@[0-9]+$": type: object + additionalProperties: false properties: compatible: diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 5db00af8e116..e2c3c3b44abb 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -69,6 +69,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -104,6 +105,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible: @@ -115,6 +117,7 @@ properties: patternProperties: "^timer@[0-9]+$": type: object + additionalProperties: false properties: compatible: diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml index b2a4e4aa7ff6..b4d54302582f 100644 --- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^[a-zA-Z]*-pins$": type: object + additionalProperties: false allOf: - $ref: ../pinctrl/pinmux-node.yaml diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml index 623a4b5cd27a..6c8d42f27fe8 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -51,6 +51,7 @@ properties: provides the reference clock for the entire U8500 system and the DB8500 counterpart. type: object + additionalProperties: false properties: compatible: @@ -63,6 +64,7 @@ properties: description: Node describing the AB8500 GPIO controller. A few GPIO pins available for misc usage. type: object + additionalProperties: false properties: compatible: @@ -78,6 +80,7 @@ properties: rtc: description: Node describing the AB8500 battery-backed RTC. type: object + additionalProperties: false properties: compatible: @@ -337,34 +340,40 @@ properties: description: The voltage for the auxilary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux2: description: The voltage for the auxilary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux3: description: The voltage for the auxilary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux4: description: The voltage for the auxilary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux5: description: The voltage for the auxilary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux6: description: The voltage for the auxilary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false # There is never any AUX7 regulator which is confusing @@ -373,18 +382,21 @@ properties: only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_intcore: description: The LDO regulator for the internal core voltage of the AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_adc: description: Analog power regulator for the analog to digital converter ADC, only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_tvout: description: The voltage for the TV output regulator, incidentally @@ -393,33 +405,39 @@ properties: Only present on AB8500. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_audio: description: The LDO regulator for the audio codec output type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic1: description: The LDO regulator for the analog microphone 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic2: description: The LDO regulator for the analog microphone 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_dmic: description: The LDO regulator for the digital microphone only present on AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_ana: description: Analog power regulator for CSI and DSI interfaces, Camera Serial Interface CSI and Display Serial Interface DSI. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible @@ -442,16 +460,19 @@ properties: description: The voltage for the VSMPS1 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext2: description: The voltage for the VSMPS2 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext3: description: The voltage for the VSMPS3 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible @@ -462,6 +483,7 @@ patternProperties: "^pwm@[1-9]+?$": type: object $ref: ../pwm/pwm.yaml# + unevaluatedProperties: false description: Represents each of the PWM blocks in the AB8500 properties: diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 5cbf2c5978b3..4fc483b1aee7 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -61,6 +61,8 @@ properties: - rockchip,rk3368-qos - rockchip,rk3399-qos - rockchip,rk3568-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos - samsung,exynos3-sysreg - samsung,exynos4-sysreg - samsung,exynos5-sysreg @@ -73,7 +75,7 @@ properties: - contains: const: syscon minItems: 2 - maxItems: 4 # Should be enough + maxItems: 5 # Should be enough reg: maxItems: 1 @@ -82,7 +84,6 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] hwlocks: @@ -94,6 +95,18 @@ required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + const: simple-mfd + then: + properties: + compatible: + minItems: 3 + maxItems: 5 + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml index 6aeedda3be15..3fdd9cb5b347 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml @@ -38,6 +38,7 @@ properties: regulators: type: object + additionalProperties: false description: | List of child nodes that specify the regulator initialization data. Child nodes must be named after their hardware counterparts: diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml index 3a53bae611bc..1c7601d05807 100644 --- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -93,6 +93,9 @@ properties: - x-powers,axp809 - x-powers,axp813 - items: + - const: x-powers,axp228 + - const: x-powers,axp221 + - items: - const: x-powers,axp805 - const: x-powers,axp806 - items: @@ -260,6 +263,7 @@ properties: "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": $ref: /schemas/regulator/regulator.yaml# type: object + unevaluatedProperties: false properties: regulator-ramp-delay: diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index 03b7f6aa591d..605ec7ab5f63 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -135,7 +135,7 @@ examples: #size-cells = <2>; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; spm: power-controller { diff --git a/MAINTAINERS b/MAINTAINERS index 43ba66d26a30..a79d3f97a914 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8475,7 +8475,6 @@ F: tools/testing/selftests/futex/ GATEWORKS SYSTEM CONTROLLER (GSC) DRIVER M: Tim Harvey <tharvey@gateworks.com> -M: Robert Jones <rjones@gateworks.com> S: Maintained F: Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml F: drivers/mfd/gateworks-gsc.c diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 380f22a35821..a1bcd67fa505 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -993,7 +993,7 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 9bdc4cb71449..99d7dad72d29 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -976,7 +976,7 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 310dff05910d..2867a138e011 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -849,7 +849,7 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index ec049cee49c6..291d294b5824 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -141,13 +141,6 @@ #define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) #define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) -/* - * The htcpld chip requires a gpio write to a specific line - * to re-enable interrupts after one has occurred. - */ -#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7) -#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0) - /* Chip 5 */ #define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) #define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) @@ -348,8 +341,6 @@ static struct htcpld_chip_platform_data htcpld_chips[] = { }; static struct htcpld_core_platform_data htcpld_pfdata = { - .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, - .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, .i2c_adapter_id = 1, .chip = htcpld_chips, diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5695b266abcf..7ac3daaf59ce 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1758,6 +1758,7 @@ config SENSORS_SIS5595 config SENSORS_SY7636A tristate "Silergy SY7636A" + depends on MFD_SY7636A help If you say yes here you get support for the thermistor readout of the Silergy SY7636A PMIC. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c3dd1fe8d8c9..8b93856de432 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -589,8 +589,8 @@ config LPC_SCH config INTEL_SOC_PMIC bool "Support for Crystal Cove PMIC" - depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK - depends on X86 || COMPILE_TEST + depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK + depends on (X86 && ACPI) || COMPILE_TEST depends on I2C_DESIGNWARE_PLATFORM=y select MFD_CORE select REGMAP_I2C @@ -938,6 +938,22 @@ config MFD_MT6360 PMIC part includes 2-channel BUCKs and 2-channel LDOs LDO part includes 4-channel LDOs +config MFD_MT6370 + tristate "MediaTek MT6370 SubPMIC" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C + help + Say Y here to enable MT6370 SubPMIC functional support. + It consists of a single cell battery charger with ADC monitoring, RGB + LEDs, dual channel flashlight, WLED backlight driver, display bias + voltage supply, one general purpose LDO, and the USB Type-C & PD + controller complies with the latest USB Type-C and PD standards. + + This driver can also be built as a module. If so, the module + will be called "mt6370". + config MFD_MT6397 tristate "MediaTek MT6397 PMIC Support" select MFD_CORE @@ -1117,6 +1133,16 @@ config MFD_SPMI_PMIC Say M here if you want to include support for the SPMI PMIC series as a module. The module will be called "qcom-spmi-pmic". +config MFD_SY7636A + tristate "Silergy SY7636A voltage regulator" + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + Enable support for Silergy SY7636A voltage regulator. + + To enable support for building sub-devices as modules, + choose M here. + config MFD_RDC321X tristate "RDC R-321x southbridge" select MFD_CORE @@ -1149,6 +1175,18 @@ config MFD_RT5033 sub-devices like charger, fuel gauge, flash LED, current source, LDO and Buck. +config MFD_RT5120 + tristate "Richtek RT5120 Power Management IC" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + The enables support for Richtek RT5120 PMIC. It includes four high + efficiency buck converters and one LDO voltage regulator. The device + is targeted at providing the CPU voltage, memory, I/O and peripheral + power rails in home entertainment devices. + config MFD_RC5T583 bool "Ricoh RC5T583 Power Management system device" depends on I2C=y @@ -1224,7 +1262,7 @@ config MFD_SI476X_CORE module will be called si476x-core. config MFD_SIMPLE_MFD_I2C - tristate "Simple Multi-Functional Device support (I2C)" + tristate depends on I2C select MFD_CORE select REGMAP_I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0004b7e86220..7ed3ef4a698c 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -175,6 +175,11 @@ obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o obj-$(CONFIG_MFD_MP2629) += mp2629.o +obj-$(CONFIG_MFD_MT6360) += mt6360-core.o +obj-$(CONFIG_MFD_MT6370) += mt6370.o +mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o +obj-$(CONFIG_MFD_MT6397) += mt6397.o + pcf50633-objs := pcf50633-core.o pcf50633-irq.o obj-$(CONFIG_MFD_PCF50633) += pcf50633.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o @@ -237,16 +242,13 @@ obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o obj-$(CONFIG_MFD_DLN2) += dln2.o obj-$(CONFIG_MFD_RT4831) += rt4831.o obj-$(CONFIG_MFD_RT5033) += rt5033.o +obj-$(CONFIG_MFD_RT5120) += rt5120.o obj-$(CONFIG_MFD_SKY81452) += sky81452.o -intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o -obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o +obj-$(CONFIG_INTEL_SOC_PMIC) += intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o -obj-$(CONFIG_MFD_MT6360) += mt6360-core.o -mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o -obj-$(CONFIG_MFD_MT6397) += mt6397.o obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c index 0a80d82c6858..a26e473507c7 100644 --- a/drivers/mfd/da9062-core.c +++ b/drivers/mfd/da9062-core.c @@ -453,6 +453,7 @@ static const struct regmap_range da9061_aa_writeable_ranges[] = { regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B), regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B), regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B), + regmap_reg_range(DA9062AA_CONFIG_J, DA9062AA_CONFIG_J), regmap_reg_range(DA9062AA_GP_ID_0, DA9062AA_GP_ID_19), }; diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c index 37e5e02a1d05..823595bcc9b7 100644 --- a/drivers/mfd/fsl-imx25-tsadc.c +++ b/drivers/mfd/fsl-imx25-tsadc.c @@ -69,7 +69,7 @@ static int mx25_tsadc_setup_irq(struct platform_device *pdev, int irq; irq = platform_get_irq(pdev, 0); - if (irq <= 0) + if (irq < 0) return irq; tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops, @@ -84,6 +84,19 @@ static int mx25_tsadc_setup_irq(struct platform_device *pdev, return 0; } +static int mx25_tsadc_unset_irq(struct platform_device *pdev) +{ + struct mx25_tsadc *tsadc = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (irq >= 0) { + irq_set_chained_handler_and_data(irq, NULL, NULL); + irq_domain_remove(tsadc->domain); + } + + return 0; +} + static void mx25_tsadc_setup_clk(struct platform_device *pdev, struct mx25_tsadc *tsadc) { @@ -171,18 +184,21 @@ static int mx25_tsadc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, tsadc); - return devm_of_platform_populate(dev); + ret = devm_of_platform_populate(dev); + if (ret) + goto err_irq; + + return 0; + +err_irq: + mx25_tsadc_unset_irq(pdev); + + return ret; } static int mx25_tsadc_remove(struct platform_device *pdev) { - struct mx25_tsadc *tsadc = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (irq) { - irq_set_chained_handler_and_data(irq, NULL, NULL); - irq_domain_remove(tsadc->domain); - } + mx25_tsadc_unset_irq(pdev); return 0; } diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c index 417b0355d904..b45b1346ab54 100644 --- a/drivers/mfd/htc-i2cpld.c +++ b/drivers/mfd/htc-i2cpld.c @@ -20,7 +20,9 @@ #include <linux/irq.h> #include <linux/spinlock.h> #include <linux/htcpld.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> struct htcpld_chip { @@ -58,8 +60,8 @@ struct htcpld_data { uint irq_start; int nirqs; uint chained_irq; - unsigned int int_reset_gpio_hi; - unsigned int int_reset_gpio_lo; + struct gpio_desc *int_reset_gpio_hi; + struct gpio_desc *int_reset_gpio_lo; /* htcpld info */ struct htcpld_chip *chip; @@ -196,9 +198,9 @@ static irqreturn_t htcpld_handler(int irq, void *dev) * be asserted. */ if (htcpld->int_reset_gpio_hi) - gpio_set_value(htcpld->int_reset_gpio_hi, 1); + gpiod_set_value(htcpld->int_reset_gpio_hi, 1); if (htcpld->int_reset_gpio_lo) - gpio_set_value(htcpld->int_reset_gpio_lo, 0); + gpiod_set_value(htcpld->int_reset_gpio_lo, 0); return IRQ_HANDLED; } @@ -352,7 +354,7 @@ static int htcpld_register_chip_i2c( memset(&info, 0, sizeof(struct i2c_board_info)); info.addr = plat_chip_data->addr; - strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE); + strscpy(info.type, "htcpld-chip", I2C_NAME_SIZE); info.platform_data = chip; /* Add the I2C device. This calls the probe() function. */ @@ -562,34 +564,28 @@ static int htcpld_core_probe(struct platform_device *pdev) return ret; /* Request the GPIO(s) for the int reset and set them up */ - if (pdata->int_reset_gpio_hi) { - ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core"); - if (ret) { - /* - * If it failed, that sucks, but we can probably - * continue on without it. - */ - dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n"); - htcpld->int_reset_gpio_hi = 0; - } else { - htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi; - gpio_set_value(htcpld->int_reset_gpio_hi, 1); - } + htcpld->int_reset_gpio_hi = gpiochip_request_own_desc(&htcpld->chip[2].chip_out, + 7, "htcpld-core", GPIO_ACTIVE_HIGH, + GPIOD_OUT_HIGH); + if (IS_ERR(htcpld->int_reset_gpio_hi)) { + /* + * If it failed, that sucks, but we can probably + * continue on without it. + */ + htcpld->int_reset_gpio_hi = NULL; + dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n"); } - if (pdata->int_reset_gpio_lo) { - ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core"); - if (ret) { - /* - * If it failed, that sucks, but we can probably - * continue on without it. - */ - dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n"); - htcpld->int_reset_gpio_lo = 0; - } else { - htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo; - gpio_set_value(htcpld->int_reset_gpio_lo, 0); - } + htcpld->int_reset_gpio_lo = gpiochip_request_own_desc(&htcpld->chip[2].chip_out, + 0, "htcpld-core", GPIO_ACTIVE_HIGH, + GPIOD_OUT_LOW); + if (IS_ERR(htcpld->int_reset_gpio_lo)) { + /* + * If it failed, that sucks, but we can probably + * continue on without it. + */ + htcpld->int_reset_gpio_lo = NULL; + dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n"); } dev_info(dev, "Initialized successfully\n"); diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index bb08b7a73fe1..dde31c50a632 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/pm_runtime.h> #include <linux/property.h> +#include <linux/pxa2xx_ssp.h> #include "intel-lpss.h" @@ -73,8 +74,18 @@ static void intel_lpss_pci_remove(struct pci_dev *pdev) static INTEL_LPSS_PM_OPS(intel_lpss_pci_pm_ops); +static const struct property_entry spt_spi_properties[] = { + PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_SPT_SSP), + { } +}; + +static const struct software_node spt_spi_node = { + .properties = spt_spi_properties, +}; + static const struct intel_lpss_platform_info spt_info = { .clk_rate = 120000000, + .swnode = &spt_spi_node, }; static const struct property_entry spt_i2c_properties[] = { @@ -108,8 +119,18 @@ static const struct intel_lpss_platform_info spt_uart_info = { .swnode = &uart_node, }; +static const struct property_entry bxt_spi_properties[] = { + PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_BXT_SSP), + { } +}; + +static const struct software_node bxt_spi_node = { + .properties = bxt_spi_properties, +}; + static const struct intel_lpss_platform_info bxt_info = { .clk_rate = 100000000, + .swnode = &bxt_spi_node, }; static const struct intel_lpss_platform_info bxt_uart_info = { @@ -166,6 +187,20 @@ static const struct intel_lpss_platform_info glk_i2c_info = { .swnode = &glk_i2c_node, }; +static const struct property_entry cnl_spi_properties[] = { + PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_CNL_SSP), + { } +}; + +static const struct software_node cnl_spi_node = { + .properties = cnl_spi_properties, +}; + +static const struct intel_lpss_platform_info cnl_info = { + .clk_rate = 120000000, + .swnode = &cnl_spi_node, +}; + static const struct intel_lpss_platform_info cnl_i2c_info = { .clk_rate = 216000000, .swnode = &spt_i2c_node, @@ -176,12 +211,26 @@ static const struct intel_lpss_platform_info ehl_i2c_info = { .swnode = &bxt_i2c_node, }; +static const struct property_entry tgl_spi_properties[] = { + PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_CNL_SSP), + { } +}; + +static const struct software_node tgl_spi_node = { + .properties = tgl_spi_properties, +}; + +static const struct intel_lpss_platform_info tgl_info = { + .clk_rate = 100000000, + .swnode = &tgl_spi_node, +}; + static const struct pci_device_id intel_lpss_pci_ids[] = { /* CML-LP */ { PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0x02a9), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0x02aa), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0x02ab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x02aa), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x02ab), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0x02c5), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x02c6), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x02c7), (kernel_ulong_t)&spt_uart_info }, @@ -189,18 +238,18 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x02e9), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x02ea), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x02eb), (kernel_ulong_t)&cnl_i2c_info }, - { PCI_VDEVICE(INTEL, 0x02fb), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x02fb), (kernel_ulong_t)&cnl_info }, /* CML-H */ { PCI_VDEVICE(INTEL, 0x06a8), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0x06a9), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0x06aa), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0x06ab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x06aa), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x06ab), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0x06c7), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0x06e8), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x06e9), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x06ea), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x06eb), (kernel_ulong_t)&cnl_i2c_info }, - { PCI_VDEVICE(INTEL, 0x06fb), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x06fb), (kernel_ulong_t)&cnl_info }, /* BXT A-Step */ { PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info }, @@ -255,8 +304,8 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { /* ICL-LP */ { PCI_VDEVICE(INTEL, 0x34a8), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0x34a9), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0x34aa), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0x34ab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x34aa), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x34ab), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0x34c5), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34c6), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34c7), (kernel_ulong_t)&spt_uart_info }, @@ -264,15 +313,15 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x34e9), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34ea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34eb), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x34fb), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x34fb), (kernel_ulong_t)&cnl_info }, /* ICL-N */ { PCI_VDEVICE(INTEL, 0x38a8), (kernel_ulong_t)&spt_uart_info }, /* TGL-H */ { PCI_VDEVICE(INTEL, 0x43a7), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x43a8), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x43a9), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x43aa), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x43ab), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43aa), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x43ab), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x43ad), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x43ae), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x43d8), (kernel_ulong_t)&bxt_i2c_info }, @@ -281,8 +330,8 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x43e9), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x43ea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x43eb), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x43fb), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x43fd), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43fb), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x43fd), (kernel_ulong_t)&tgl_info }, /* EHL */ { PCI_VDEVICE(INTEL, 0x4b28), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x4b29), (kernel_ulong_t)&bxt_uart_info }, @@ -301,8 +350,8 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { /* JSL */ { PCI_VDEVICE(INTEL, 0x4da8), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0x4da9), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0x4daa), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0x4dab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x4daa), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x4dab), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0x4dc5), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x4dc6), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x4dc7), (kernel_ulong_t)&spt_uart_info }, @@ -310,12 +359,12 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x4de9), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x4dea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x4deb), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x4dfb), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x4dfb), (kernel_ulong_t)&cnl_info }, /* ADL-P */ { PCI_VDEVICE(INTEL, 0x51a8), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x51a9), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x51aa), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x51ab), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x51aa), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x51ab), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x51c5), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x51c6), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x51c7), (kernel_ulong_t)&bxt_uart_info }, @@ -325,12 +374,12 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x51e9), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x51ea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x51eb), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x51fb), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x51fb), (kernel_ulong_t)&tgl_info }, /* ADL-M */ { PCI_VDEVICE(INTEL, 0x54a8), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x54a9), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x54aa), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x54ab), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x54aa), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x54ab), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x54c5), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x54c6), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x54c7), (kernel_ulong_t)&bxt_uart_info }, @@ -338,7 +387,7 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x54e9), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x54ea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x54eb), (kernel_ulong_t)&bxt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x54fb), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x54fb), (kernel_ulong_t)&tgl_info }, /* APL */ { PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&apl_i2c_info }, { PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&apl_i2c_info }, @@ -358,39 +407,39 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { /* RPL-S */ { PCI_VDEVICE(INTEL, 0x7a28), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x7a29), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x7a2a), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x7a2b), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x7a2a), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x7a2b), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x7a4c), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7a4d), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7a4e), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7a4f), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7a5c), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x7a79), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x7a7b), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x7a79), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x7a7b), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x7a7c), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7a7d), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7a7e), (kernel_ulong_t)&bxt_uart_info }, /* ADL-S */ { PCI_VDEVICE(INTEL, 0x7aa8), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x7aa9), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x7aaa), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x7aab), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x7aaa), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x7aab), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x7acc), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7acd), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7ace), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7acf), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7adc), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x7af9), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x7afb), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x7af9), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x7afb), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x7afc), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7afd), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7afe), (kernel_ulong_t)&bxt_uart_info }, /* MTL-P */ { PCI_VDEVICE(INTEL, 0x7e25), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x7e26), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0x7e27), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x7e30), (kernel_ulong_t)&bxt_info }, - { PCI_VDEVICE(INTEL, 0x7e46), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x7e27), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x7e30), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0x7e46), (kernel_ulong_t)&tgl_info }, { PCI_VDEVICE(INTEL, 0x7e50), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7e51), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x7e52), (kernel_ulong_t)&bxt_uart_info }, @@ -424,8 +473,8 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { /* CNL-LP */ { PCI_VDEVICE(INTEL, 0x9da8), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0x9da9), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0x9daa), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0x9dab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x9daa), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x9dab), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0x9dc5), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x9dc6), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x9dc7), (kernel_ulong_t)&spt_uart_info }, @@ -433,12 +482,12 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x9de9), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x9dea), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x9deb), (kernel_ulong_t)&cnl_i2c_info }, - { PCI_VDEVICE(INTEL, 0x9dfb), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x9dfb), (kernel_ulong_t)&cnl_info }, /* TGL-LP */ { PCI_VDEVICE(INTEL, 0xa0a8), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0xa0a9), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0xa0aa), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0xa0ab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa0aa), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0xa0ab), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0xa0c5), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa0c6), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa0c7), (kernel_ulong_t)&bxt_uart_info }, @@ -448,15 +497,15 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0xa0db), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0xa0dc), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0xa0dd), (kernel_ulong_t)&bxt_uart_info }, - { PCI_VDEVICE(INTEL, 0xa0de), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0xa0df), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa0de), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0xa0df), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0xa0e8), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa0e9), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa0ea), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa0eb), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa0fb), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0xa0fd), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0xa0fe), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa0fb), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0xa0fd), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0xa0fe), (kernel_ulong_t)&cnl_info }, /* SPT-H */ { PCI_VDEVICE(INTEL, 0xa127), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0xa128), (kernel_ulong_t)&spt_uart_info }, @@ -479,14 +528,14 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { /* CNL-H */ { PCI_VDEVICE(INTEL, 0xa328), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0xa329), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0xa32a), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0xa32b), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa32a), (kernel_ulong_t)&cnl_info }, + { PCI_VDEVICE(INTEL, 0xa32b), (kernel_ulong_t)&cnl_info }, { PCI_VDEVICE(INTEL, 0xa347), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0xa368), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0xa369), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&cnl_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&cnl_info }, /* CML-V */ { PCI_VDEVICE(INTEL, 0xa3a7), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0xa3a8), (kernel_ulong_t)&spt_uart_info }, diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c index f4d0d72573c8..7e3319e5b22f 100644 --- a/drivers/mfd/intel-m10-bmc.c +++ b/drivers/mfd/intel-m10-bmc.c @@ -21,6 +21,7 @@ enum m10bmc_type { static struct mfd_cell m10bmc_d5005_subdevs[] = { { .name = "d5005bmc-hwmon" }, + { .name = "d5005bmc-sec-update" } }; static struct mfd_cell m10bmc_pacn3000_subdevs[] = { diff --git a/drivers/mfd/intel_soc_pmic_chtdc_ti.c b/drivers/mfd/intel_soc_pmic_chtdc_ti.c index 1c7577b881ff..282b8fd08009 100644 --- a/drivers/mfd/intel_soc_pmic_chtdc_ti.c +++ b/drivers/mfd/intel_soc_pmic_chtdc_ti.c @@ -140,7 +140,7 @@ static void chtdc_ti_shutdown(struct i2c_client *i2c) disable_irq(pmic->irq); } -static int __maybe_unused chtdc_ti_suspend(struct device *dev) +static int chtdc_ti_suspend(struct device *dev) { struct intel_soc_pmic *pmic = dev_get_drvdata(dev); @@ -149,7 +149,7 @@ static int __maybe_unused chtdc_ti_suspend(struct device *dev) return 0; } -static int __maybe_unused chtdc_ti_resume(struct device *dev) +static int chtdc_ti_resume(struct device *dev) { struct intel_soc_pmic *pmic = dev_get_drvdata(dev); @@ -158,7 +158,7 @@ static int __maybe_unused chtdc_ti_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(chtdc_ti_pm_ops, chtdc_ti_suspend, chtdc_ti_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(chtdc_ti_pm_ops, chtdc_ti_suspend, chtdc_ti_resume); static const struct acpi_device_id chtdc_ti_acpi_ids[] = { { "INT33F5" }, @@ -169,7 +169,7 @@ MODULE_DEVICE_TABLE(acpi, chtdc_ti_acpi_ids); static struct i2c_driver chtdc_ti_i2c_driver = { .driver = { .name = "intel_soc_pmic_chtdc_ti", - .pm = &chtdc_ti_pm_ops, + .pm = pm_sleep_ptr(&chtdc_ti_pm_ops), .acpi_match_table = chtdc_ti_acpi_ids, }, .probe_new = chtdc_ti_probe, diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c deleted file mode 100644 index b824e15f4d22..000000000000 --- a/drivers/mfd/intel_soc_pmic_core.c +++ /dev/null @@ -1,158 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Intel SoC PMIC MFD Driver - * - * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved. - * - * Author: Yang, Bin <bin.yang@intel.com> - * Author: Zhu, Lejun <lejun.zhu@linux.intel.com> - */ - -#include <linux/acpi.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/mfd/core.h> -#include <linux/mfd/intel_soc_pmic.h> -#include <linux/platform_data/x86/soc.h> -#include <linux/pwm.h> -#include <linux/regmap.h> - -#include "intel_soc_pmic_core.h" - -/* PWM consumed by the Intel GFX */ -static struct pwm_lookup crc_pwm_lookup[] = { - PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL), -}; - -static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *i2c_id) -{ - struct device *dev = &i2c->dev; - struct intel_soc_pmic_config *config; - struct intel_soc_pmic *pmic; - int ret; - - if (soc_intel_is_byt()) - config = &intel_soc_pmic_config_byt_crc; - else - config = &intel_soc_pmic_config_cht_crc; - - pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL); - if (!pmic) - return -ENOMEM; - - dev_set_drvdata(dev, pmic); - - pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config); - if (IS_ERR(pmic->regmap)) - return PTR_ERR(pmic->regmap); - - pmic->irq = i2c->irq; - - ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, - config->irq_flags | IRQF_ONESHOT, - 0, config->irq_chip, - &pmic->irq_chip_data); - if (ret) - return ret; - - ret = enable_irq_wake(pmic->irq); - if (ret) - dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret); - - /* Add lookup table for crc-pwm */ - pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); - - /* To distuingish this domain from the GPIO/charger's irqchip domains */ - irq_domain_update_bus_token(regmap_irq_get_domain(pmic->irq_chip_data), - DOMAIN_BUS_NEXUS); - - ret = mfd_add_devices(dev, -1, config->cell_dev, - config->n_cell_devs, NULL, 0, - regmap_irq_get_domain(pmic->irq_chip_data)); - if (ret) - goto err_del_irq_chip; - - return 0; - -err_del_irq_chip: - regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data); - return ret; -} - -static void intel_soc_pmic_i2c_remove(struct i2c_client *i2c) -{ - struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev); - - regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data); - - /* remove crc-pwm lookup table */ - pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); - - mfd_remove_devices(&i2c->dev); -} - -static void intel_soc_pmic_shutdown(struct i2c_client *i2c) -{ - struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev); - - disable_irq(pmic->irq); - - return; -} - -#if defined(CONFIG_PM_SLEEP) -static int intel_soc_pmic_suspend(struct device *dev) -{ - struct intel_soc_pmic *pmic = dev_get_drvdata(dev); - - disable_irq(pmic->irq); - - return 0; -} - -static int intel_soc_pmic_resume(struct device *dev) -{ - struct intel_soc_pmic *pmic = dev_get_drvdata(dev); - - enable_irq(pmic->irq); - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(intel_soc_pmic_pm_ops, intel_soc_pmic_suspend, - intel_soc_pmic_resume); - -static const struct i2c_device_id intel_soc_pmic_i2c_id[] = { - { } -}; -MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id); - -#if defined(CONFIG_ACPI) -static const struct acpi_device_id intel_soc_pmic_acpi_match[] = { - { "INT33FD" }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match); -#endif - -static struct i2c_driver intel_soc_pmic_i2c_driver = { - .driver = { - .name = "intel_soc_pmic_i2c", - .pm = &intel_soc_pmic_pm_ops, - .acpi_match_table = ACPI_PTR(intel_soc_pmic_acpi_match), - }, - .probe = intel_soc_pmic_i2c_probe, - .remove = intel_soc_pmic_i2c_remove, - .id_table = intel_soc_pmic_i2c_id, - .shutdown = intel_soc_pmic_shutdown, -}; - -module_i2c_driver(intel_soc_pmic_i2c_driver); - -MODULE_DESCRIPTION("I2C driver for Intel SoC PMIC"); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>"); -MODULE_AUTHOR("Zhu, Lejun <lejun.zhu@linux.intel.com>"); diff --git a/drivers/mfd/intel_soc_pmic_core.h b/drivers/mfd/intel_soc_pmic_core.h deleted file mode 100644 index d490685845eb..000000000000 --- a/drivers/mfd/intel_soc_pmic_core.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Intel SoC PMIC MFD Driver - * - * Copyright (C) 2012-2014 Intel Corporation. All rights reserved. - * - * Author: Yang, Bin <bin.yang@intel.com> - * Author: Zhu, Lejun <lejun.zhu@linux.intel.com> - */ - -#ifndef __INTEL_SOC_PMIC_CORE_H__ -#define __INTEL_SOC_PMIC_CORE_H__ - -struct intel_soc_pmic_config { - unsigned long irq_flags; - struct mfd_cell *cell_dev; - int n_cell_devs; - const struct regmap_config *regmap_config; - const struct regmap_irq_chip *irq_chip; -}; - -extern struct intel_soc_pmic_config intel_soc_pmic_config_byt_crc; -extern struct intel_soc_pmic_config intel_soc_pmic_config_cht_crc; - -#endif /* __INTEL_SOC_PMIC_CORE_H__ */ diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c index 5bb0367bd974..b1548a933dc3 100644 --- a/drivers/mfd/intel_soc_pmic_crc.c +++ b/drivers/mfd/intel_soc_pmic_crc.c @@ -2,18 +2,21 @@ /* * Device access for Crystal Cove PMIC * - * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved. + * Copyright (C) 2012-2014, 2022 Intel Corporation. All rights reserved. * * Author: Yang, Bin <bin.yang@intel.com> * Author: Zhu, Lejun <lejun.zhu@linux.intel.com> */ +#include <linux/i2c.h> #include <linux/interrupt.h> -#include <linux/regmap.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> #include <linux/mfd/core.h> #include <linux/mfd/intel_soc_pmic.h> - -#include "intel_soc_pmic_core.h" +#include <linux/platform_data/x86/soc.h> +#include <linux/pwm.h> +#include <linux/regmap.h> #define CRYSTAL_COVE_MAX_REGISTER 0xC6 @@ -132,7 +135,20 @@ static const struct regmap_irq_chip crystal_cove_irq_chip = { .mask_base = CRYSTAL_COVE_REG_MIRQLVL1, }; -struct intel_soc_pmic_config intel_soc_pmic_config_byt_crc = { +/* PWM consumed by the Intel GFX */ +static struct pwm_lookup crc_pwm_lookup[] = { + PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL), +}; + +struct crystal_cove_config { + unsigned long irq_flags; + struct mfd_cell *cell_dev; + int n_cell_devs; + const struct regmap_config *regmap_config; + const struct regmap_irq_chip *irq_chip; +}; + +static const struct crystal_cove_config crystal_cove_config_byt_crc = { .irq_flags = IRQF_TRIGGER_RISING, .cell_dev = crystal_cove_byt_dev, .n_cell_devs = ARRAY_SIZE(crystal_cove_byt_dev), @@ -140,10 +156,121 @@ struct intel_soc_pmic_config intel_soc_pmic_config_byt_crc = { .irq_chip = &crystal_cove_irq_chip, }; -struct intel_soc_pmic_config intel_soc_pmic_config_cht_crc = { +static const struct crystal_cove_config crystal_cove_config_cht_crc = { .irq_flags = IRQF_TRIGGER_RISING, .cell_dev = crystal_cove_cht_dev, .n_cell_devs = ARRAY_SIZE(crystal_cove_cht_dev), .regmap_config = &crystal_cove_regmap_config, .irq_chip = &crystal_cove_irq_chip, }; + +static int crystal_cove_i2c_probe(struct i2c_client *i2c) +{ + const struct crystal_cove_config *config; + struct device *dev = &i2c->dev; + struct intel_soc_pmic *pmic; + int ret; + + if (soc_intel_is_byt()) + config = &crystal_cove_config_byt_crc; + else + config = &crystal_cove_config_cht_crc; + + pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + i2c_set_clientdata(i2c, pmic); + + pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config); + if (IS_ERR(pmic->regmap)) + return PTR_ERR(pmic->regmap); + + pmic->irq = i2c->irq; + + ret = devm_regmap_add_irq_chip(dev, pmic->regmap, pmic->irq, + config->irq_flags | IRQF_ONESHOT, + 0, config->irq_chip, &pmic->irq_chip_data); + if (ret) + return ret; + + ret = enable_irq_wake(pmic->irq); + if (ret) + dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret); + + /* Add lookup table for crc-pwm */ + pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); + + /* To distuingish this domain from the GPIO/charger's irqchip domains */ + irq_domain_update_bus_token(regmap_irq_get_domain(pmic->irq_chip_data), + DOMAIN_BUS_NEXUS); + + ret = mfd_add_devices(dev, PLATFORM_DEVID_NONE, config->cell_dev, + config->n_cell_devs, NULL, 0, + regmap_irq_get_domain(pmic->irq_chip_data)); + if (ret) + pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); + + return ret; +} + +static void crystal_cove_i2c_remove(struct i2c_client *i2c) +{ + /* remove crc-pwm lookup table */ + pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); + + mfd_remove_devices(&i2c->dev); +} + +static void crystal_cove_shutdown(struct i2c_client *i2c) +{ + struct intel_soc_pmic *pmic = i2c_get_clientdata(i2c); + + disable_irq(pmic->irq); + + return; +} + +static int crystal_cove_suspend(struct device *dev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(dev); + + disable_irq(pmic->irq); + + return 0; +} + +static int crystal_cove_resume(struct device *dev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(dev); + + enable_irq(pmic->irq); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(crystal_cove_pm_ops, crystal_cove_suspend, crystal_cove_resume); + +static const struct acpi_device_id crystal_cove_acpi_match[] = { + { "INT33FD" }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, crystal_cove_acpi_match); + +static struct i2c_driver crystal_cove_i2c_driver = { + .driver = { + .name = "crystal_cove_i2c", + .pm = pm_sleep_ptr(&crystal_cove_pm_ops), + .acpi_match_table = crystal_cove_acpi_match, + }, + .probe_new = crystal_cove_i2c_probe, + .remove = crystal_cove_i2c_remove, + .shutdown = crystal_cove_shutdown, +}; + +module_i2c_driver(crystal_cove_i2c_driver); + +MODULE_DESCRIPTION("I2C driver for Intel SoC PMIC"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>"); +MODULE_AUTHOR("Zhu, Lejun <lejun.zhu@linux.intel.com>"); diff --git a/drivers/mfd/lp8788-irq.c b/drivers/mfd/lp8788-irq.c index 348439a3fbbd..39006297f3d2 100644 --- a/drivers/mfd/lp8788-irq.c +++ b/drivers/mfd/lp8788-irq.c @@ -175,6 +175,7 @@ int lp8788_irq_init(struct lp8788 *lp, int irq) IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lp8788-irq", irqd); if (ret) { + irq_domain_remove(lp->irqdm); dev_err(lp->dev, "failed to create a thread for IRQ_N\n"); return ret; } @@ -188,4 +189,6 @@ void lp8788_irq_exit(struct lp8788 *lp) { if (lp->irq) free_irq(lp->irq, lp->irqdm); + if (lp->irqdm) + irq_domain_remove(lp->irqdm); } diff --git a/drivers/mfd/lp8788.c b/drivers/mfd/lp8788.c index e7c601bca9ef..724a5712b36b 100644 --- a/drivers/mfd/lp8788.c +++ b/drivers/mfd/lp8788.c @@ -195,8 +195,16 @@ static int lp8788_probe(struct i2c_client *cl, const struct i2c_device_id *id) if (ret) return ret; - return mfd_add_devices(lp->dev, -1, lp8788_devs, - ARRAY_SIZE(lp8788_devs), NULL, 0, NULL); + ret = mfd_add_devices(lp->dev, -1, lp8788_devs, + ARRAY_SIZE(lp8788_devs), NULL, 0, NULL); + if (ret) + goto err_exit_irq; + + return 0; + +err_exit_irq: + lp8788_irq_exit(lp); + return ret; } static void lp8788_remove(struct i2c_client *cl) diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 650951f89f1c..7b1c597b6879 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -959,7 +959,7 @@ static int lpc_ich_finalize_wdt_cell(struct pci_dev *dev) info = &lpc_chipset_info[priv->chipset]; pdata->version = info->iTCO_version; - strlcpy(pdata->name, info->name, sizeof(pdata->name)); + strscpy(pdata->name, info->name, sizeof(pdata->name)); cell->platform_data = pdata; cell->pdata_size = sizeof(*pdata); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 8b058200d5ad..16d1861e9682 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -105,7 +105,7 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell, .ids = ids, }; - strlcpy(ids[0].id, match->pnpid, sizeof(ids[0].id)); + strscpy(ids[0].id, match->pnpid, sizeof(ids[0].id)); acpi_dev_for_each_child(parent, match_device_ids, &wd); adev = wd.adev; } else { @@ -368,6 +368,7 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) { struct platform_device *pdev; const struct mfd_cell *cell; + struct mfd_of_node_entry *of_entry, *tmp; int *level = data; if (dev->type != &mfd_dev_type) @@ -382,6 +383,12 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) if (cell->swnode) device_remove_software_node(&pdev->dev); + list_for_each_entry_safe(of_entry, tmp, &mfd_of_node_list, list) + if (of_entry->dev == &pdev->dev) { + list_del(&of_entry->list); + kfree(of_entry); + } + regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies, cell->num_parent_supplies); diff --git a/drivers/mfd/mt6370.c b/drivers/mfd/mt6370.c new file mode 100644 index 000000000000..cf19cce2fdc0 --- /dev/null +++ b/drivers/mfd/mt6370.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/bits.h> +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "mt6370.h" + +#define MT6370_REG_DEV_INFO 0x100 +#define MT6370_REG_CHG_IRQ1 0x1C0 +#define MT6370_REG_CHG_MASK1 0x1E0 +#define MT6370_REG_MAXADDR 0x1FF + +#define MT6370_VENID_MASK GENMASK(7, 4) + +#define MT6370_NUM_IRQREGS 16 +#define MT6370_USBC_I2CADDR 0x4E +#define MT6370_MAX_ADDRLEN 2 + +#define MT6370_VENID_RT5081 0x8 +#define MT6370_VENID_RT5081A 0xA +#define MT6370_VENID_MT6370 0xE +#define MT6370_VENID_MT6371 0xF +#define MT6370_VENID_MT6372P 0x9 +#define MT6370_VENID_MT6372CP 0xB + +static const struct regmap_irq mt6370_irqs[] = { + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHGON, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TREG, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_AICR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_MIVR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PWR_RDY, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FL_CHG_VINOVP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSUV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSOV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VBATOV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VINOVPCHG, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COLD, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COOL, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_WARM, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_HOT, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_STATC, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_FAULT, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_STATC, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TMR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_BATABS, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ADPBAD, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RVP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TSHUTDOWN, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IINMEAS, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ICCMEAS, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET_DONE, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_WDTMR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_SSFINISH, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RECHG, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TERM, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IEOC, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ADC_DONE, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PUMPX_DONE, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_BATUV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_MIDOV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_OLP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ATTACH, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DETACH, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_STPDONE, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_VBUSDET_DONE, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_DET, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DCDT, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_VGOK, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_WDTMR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_UC, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OC, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_SWON, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP_D, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP_D, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_STRBPIN, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TORPIN, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TX, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_LVF, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_SHORT, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_SHORT, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_STRB, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB, 8), + REGMAP_IRQ_REG_LINE(mT6370_IRQ_FLED2_STRB_TO, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB_TO, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_TOR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_TOR, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OTP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_OVP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_UV, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_LDO_OC, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OCP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OVP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_OCP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_OCP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_BST_OCP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_SCP, 8), + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_SCP, 8), +}; + +static const struct regmap_irq_chip mt6370_irq_chip = { + .name = "mt6370-irqs", + .status_base = MT6370_REG_CHG_IRQ1, + .mask_base = MT6370_REG_CHG_MASK1, + .num_regs = MT6370_NUM_IRQREGS, + .irqs = mt6370_irqs, + .num_irqs = ARRAY_SIZE(mt6370_irqs), +}; + +static const struct resource mt6370_regulator_irqs[] = { + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_SCP, "db_vpos_scp"), + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_SCP, "db_vneg_scp"), + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_BST_OCP, "db_vbst_ocp"), + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_OCP, "db_vpos_ocp"), + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_OCP, "db_vneg_ocp"), + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_LDO_OC, "ldo_oc"), +}; + +static const struct mfd_cell mt6370_devices[] = { + MFD_CELL_OF("mt6370-adc", + NULL, NULL, 0, 0, "mediatek,mt6370-adc"), + MFD_CELL_OF("mt6370-charger", + NULL, NULL, 0, 0, "mediatek,mt6370-charger"), + MFD_CELL_OF("mt6370-flashlight", + NULL, NULL, 0, 0, "mediatek,mt6370-flashlight"), + MFD_CELL_OF("mt6370-indicator", + NULL, NULL, 0, 0, "mediatek,mt6370-indicator"), + MFD_CELL_OF("mt6370-tcpc", + NULL, NULL, 0, 0, "mediatek,mt6370-tcpc"), + MFD_CELL_RES("mt6370-regulator", mt6370_regulator_irqs), +}; + +static const struct mfd_cell mt6370_exclusive_devices[] = { + MFD_CELL_OF("mt6370-backlight", + NULL, NULL, 0, 0, "mediatek,mt6370-backlight"), +}; + +static const struct mfd_cell mt6372_exclusive_devices[] = { + MFD_CELL_OF("mt6370-backlight", + NULL, NULL, 0, 0, "mediatek,mt6372-backlight"), +}; + +static int mt6370_check_vendor_info(struct device *dev, struct regmap *rmap, + int *vid) +{ + unsigned int devinfo; + int ret; + + ret = regmap_read(rmap, MT6370_REG_DEV_INFO, &devinfo); + if (ret) + return ret; + + *vid = FIELD_GET(MT6370_VENID_MASK, devinfo); + switch (*vid) { + case MT6370_VENID_RT5081: + case MT6370_VENID_RT5081A: + case MT6370_VENID_MT6370: + case MT6370_VENID_MT6371: + case MT6370_VENID_MT6372P: + case MT6370_VENID_MT6372CP: + return 0; + default: + dev_err(dev, "Unknown Vendor ID 0x%02x\n", devinfo); + return -ENODEV; + } +} + +static int mt6370_regmap_read(void *context, const void *reg_buf, + size_t reg_size, void *val_buf, size_t val_size) +{ + struct mt6370_info *info = context; + const u8 *u8_buf = reg_buf; + u8 bank_idx, bank_addr; + int ret; + + bank_idx = u8_buf[0]; + bank_addr = u8_buf[1]; + + ret = i2c_smbus_read_i2c_block_data(info->i2c[bank_idx], bank_addr, + val_size, val_buf); + if (ret < 0) + return ret; + + if (ret != val_size) + return -EIO; + + return 0; +} + +static int mt6370_regmap_write(void *context, const void *data, size_t count) +{ + struct mt6370_info *info = context; + const u8 *u8_buf = data; + u8 bank_idx, bank_addr; + int len = count - MT6370_MAX_ADDRLEN; + + bank_idx = u8_buf[0]; + bank_addr = u8_buf[1]; + + return i2c_smbus_write_i2c_block_data(info->i2c[bank_idx], bank_addr, + len, data + MT6370_MAX_ADDRLEN); +} + +static const struct regmap_bus mt6370_regmap_bus = { + .read = mt6370_regmap_read, + .write = mt6370_regmap_write, +}; + +static const struct regmap_config mt6370_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .max_register = MT6370_REG_MAXADDR, +}; + +static int mt6370_probe(struct i2c_client *i2c) +{ + struct mt6370_info *info; + struct i2c_client *usbc_i2c; + struct regmap *regmap; + struct device *dev = &i2c->dev; + int ret, vid; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usbc_i2c = devm_i2c_new_dummy_device(dev, i2c->adapter, + MT6370_USBC_I2CADDR); + if (IS_ERR(usbc_i2c)) + return dev_err_probe(dev, PTR_ERR(usbc_i2c), + "Failed to register USBC I2C client\n"); + + /* Assign I2C client for PMU and TypeC */ + info->i2c[MT6370_PMU_I2C] = i2c; + info->i2c[MT6370_USBC_I2C] = usbc_i2c; + + regmap = devm_regmap_init(dev, &mt6370_regmap_bus, + info, &mt6370_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to init regmap\n"); + + ret = mt6370_check_vendor_info(dev, regmap, &vid); + if (ret) + return dev_err_probe(dev, ret, "Failed to check vendor info\n"); + + ret = devm_regmap_add_irq_chip(dev, regmap, i2c->irq, + IRQF_ONESHOT, -1, &mt6370_irq_chip, + &info->irq_data); + if (ret) + return dev_err_probe(dev, ret, "Failed to add irq chip\n"); + + switch (vid) { + case MT6370_VENID_MT6372P: + case MT6370_VENID_MT6372CP: + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + mt6372_exclusive_devices, + ARRAY_SIZE(mt6372_exclusive_devices), + NULL, 0, + regmap_irq_get_domain(info->irq_data)); + break; + default: + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + mt6370_exclusive_devices, + ARRAY_SIZE(mt6370_exclusive_devices), + NULL, 0, + regmap_irq_get_domain(info->irq_data)); + break; + } + + if (ret) + return dev_err_probe(dev, ret, "Failed to add the exclusive devices\n"); + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + mt6370_devices, ARRAY_SIZE(mt6370_devices), + NULL, 0, + regmap_irq_get_domain(info->irq_data)); +} + +static const struct of_device_id mt6370_match_table[] = { + { .compatible = "mediatek,mt6370" }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_match_table); + +static struct i2c_driver mt6370_driver = { + .driver = { + .name = "mt6370", + .of_match_table = mt6370_match_table, + }, + .probe_new = mt6370_probe, +}; +module_i2c_driver(mt6370_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("MediaTek MT6370 SubPMIC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/mt6370.h b/drivers/mfd/mt6370.h new file mode 100644 index 000000000000..094e59e4af4e --- /dev/null +++ b/drivers/mfd/mt6370.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#ifndef __MFD_MT6370_H__ +#define __MFD_MT6370_H__ + +/* IRQ definitions */ +#define MT6370_IRQ_DIRCHGON 0 +#define MT6370_IRQ_CHG_TREG 4 +#define MT6370_IRQ_CHG_AICR 5 +#define MT6370_IRQ_CHG_MIVR 6 +#define MT6370_IRQ_PWR_RDY 7 +#define MT6370_IRQ_FL_CHG_VINOVP 11 +#define MT6370_IRQ_CHG_VSYSUV 12 +#define MT6370_IRQ_CHG_VSYSOV 13 +#define MT6370_IRQ_CHG_VBATOV 14 +#define MT6370_IRQ_CHG_VINOVPCHG 15 +#define MT6370_IRQ_TS_BAT_COLD 20 +#define MT6370_IRQ_TS_BAT_COOL 21 +#define MT6370_IRQ_TS_BAT_WARM 22 +#define MT6370_IRQ_TS_BAT_HOT 23 +#define MT6370_IRQ_TS_STATC 24 +#define MT6370_IRQ_CHG_FAULT 25 +#define MT6370_IRQ_CHG_STATC 26 +#define MT6370_IRQ_CHG_TMR 27 +#define MT6370_IRQ_CHG_BATABS 28 +#define MT6370_IRQ_CHG_ADPBAD 29 +#define MT6370_IRQ_CHG_RVP 30 +#define MT6370_IRQ_TSHUTDOWN 31 +#define MT6370_IRQ_CHG_IINMEAS 32 +#define MT6370_IRQ_CHG_ICCMEAS 33 +#define MT6370_IRQ_CHGDET_DONE 34 +#define MT6370_IRQ_WDTMR 35 +#define MT6370_IRQ_SSFINISH 36 +#define MT6370_IRQ_CHG_RECHG 37 +#define MT6370_IRQ_CHG_TERM 38 +#define MT6370_IRQ_CHG_IEOC 39 +#define MT6370_IRQ_ADC_DONE 40 +#define MT6370_IRQ_PUMPX_DONE 41 +#define MT6370_IRQ_BST_BATUV 45 +#define MT6370_IRQ_BST_MIDOV 46 +#define MT6370_IRQ_BST_OLP 47 +#define MT6370_IRQ_ATTACH 48 +#define MT6370_IRQ_DETACH 49 +#define MT6370_IRQ_HVDCP_STPDONE 51 +#define MT6370_IRQ_HVDCP_VBUSDET_DONE 52 +#define MT6370_IRQ_HVDCP_DET 53 +#define MT6370_IRQ_CHGDET 54 +#define MT6370_IRQ_DCDT 55 +#define MT6370_IRQ_DIRCHG_VGOK 59 +#define MT6370_IRQ_DIRCHG_WDTMR 60 +#define MT6370_IRQ_DIRCHG_UC 61 +#define MT6370_IRQ_DIRCHG_OC 62 +#define MT6370_IRQ_DIRCHG_OV 63 +#define MT6370_IRQ_OVPCTRL_SWON 67 +#define MT6370_IRQ_OVPCTRL_UVP_D 68 +#define MT6370_IRQ_OVPCTRL_UVP 69 +#define MT6370_IRQ_OVPCTRL_OVP_D 70 +#define MT6370_IRQ_OVPCTRL_OVP 71 +#define MT6370_IRQ_FLED_STRBPIN 72 +#define MT6370_IRQ_FLED_TORPIN 73 +#define MT6370_IRQ_FLED_TX 74 +#define MT6370_IRQ_FLED_LVF 75 +#define MT6370_IRQ_FLED2_SHORT 78 +#define MT6370_IRQ_FLED1_SHORT 79 +#define MT6370_IRQ_FLED2_STRB 80 +#define MT6370_IRQ_FLED1_STRB 81 +#define mT6370_IRQ_FLED2_STRB_TO 82 +#define MT6370_IRQ_FLED1_STRB_TO 83 +#define MT6370_IRQ_FLED2_TOR 84 +#define MT6370_IRQ_FLED1_TOR 85 +#define MT6370_IRQ_OTP 93 +#define MT6370_IRQ_VDDA_OVP 94 +#define MT6370_IRQ_VDDA_UV 95 +#define MT6370_IRQ_LDO_OC 103 +#define MT6370_IRQ_BLED_OCP 118 +#define MT6370_IRQ_BLED_OVP 119 +#define MT6370_IRQ_DSV_VNEG_OCP 123 +#define MT6370_IRQ_DSV_VPOS_OCP 124 +#define MT6370_IRQ_DSV_BST_OCP 125 +#define MT6370_IRQ_DSV_VNEG_SCP 126 +#define MT6370_IRQ_DSV_VPOS_SCP 127 + +enum { + MT6370_USBC_I2C = 0, + MT6370_PMU_I2C, + MT6370_MAX_I2C +}; + +struct mt6370_info { + struct i2c_client *i2c[MT6370_MAX_I2C]; + struct regmap_irq_chip_data *irq_data; +}; + +#endif /* __MFD_MT6375_H__ */ diff --git a/drivers/mfd/ocelot-spi.c b/drivers/mfd/ocelot-spi.c index 0f097f4829d1..2ecd271de2fb 100644 --- a/drivers/mfd/ocelot-spi.c +++ b/drivers/mfd/ocelot-spi.c @@ -276,6 +276,7 @@ static const struct spi_device_id ocelot_spi_ids[] = { { "vsc7512", 0 }, { } }; +MODULE_DEVICE_TABLE(spi, ocelot_spi_ids); static const struct of_device_id ocelot_spi_of_match[] = { { .compatible = "mscc,vsc7512" }, diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index 00003a868d28..7e2cd79d17eb 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -60,6 +60,7 @@ static const struct of_device_id pmic_spmi_id_table[] = { { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, + { .compatible = "qcom,pmp8074", .data = N_USIDS(2) }, { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, { } diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c index d5d641efa077..e00da7c7e3b1 100644 --- a/drivers/mfd/rk808.c +++ b/drivers/mfd/rk808.c @@ -67,6 +67,10 @@ static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) case RK817_SECONDS_REG ... RK817_WEEKS_REG: case RK817_RTC_STATUS_REG: case RK817_CODEC_DTOP_LPT_SRST: + case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0: + case RK817_PMIC_CHRG_STS: + case RK817_PMIC_CHRG_OUT: + case RK817_PMIC_CHRG_IN: case RK817_INT_STS_REG0: case RK817_INT_STS_REG1: case RK817_INT_STS_REG2: @@ -74,7 +78,7 @@ static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) return true; } - return true; + return false; } static const struct regmap_config rk818_regmap_config = { @@ -127,6 +131,11 @@ static const struct resource rk817_pwrkey_resources[] = { DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL), }; +static const struct resource rk817_charger_resources[] = { + DEFINE_RES_IRQ(RK817_IRQ_PLUG_IN), + DEFINE_RES_IRQ(RK817_IRQ_PLUG_OUT), +}; + static const struct mfd_cell rk805s[] = { { .name = "rk808-clkout", }, { .name = "rk808-regulator", }, @@ -166,6 +175,11 @@ static const struct mfd_cell rk817s[] = { .resources = &rk817_rtc_resources[0], }, { .name = "rk817-codec",}, + { + .name = "rk817-charger", + .num_resources = ARRAY_SIZE(rk817_charger_resources), + .resources = &rk817_charger_resources[0], + }, }; static const struct mfd_cell rk818s[] = { diff --git a/drivers/mfd/rt5120.c b/drivers/mfd/rt5120.c new file mode 100644 index 000000000000..8046e383bc92 --- /dev/null +++ b/drivers/mfd/rt5120.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/regmap.h> + +#define RT5120_REG_INTENABLE 0x1D +#define RT5120_REG_INTSTAT 0x1E +#define RT5120_REG_FZCMODE 0x44 + +#define RT5120_INT_HOTDIE 0 +#define RT5120_INT_PWRKEY_REL 5 +#define RT5120_INT_PWRKEY_PRESS 6 + +static const struct regmap_range rt5120_rd_yes_ranges[] = { + regmap_reg_range(0x03, 0x13), + regmap_reg_range(0x1c, 0x20), + regmap_reg_range(0x44, 0x44), +}; + +static const struct regmap_range rt5120_wr_yes_ranges[] = { + regmap_reg_range(0x06, 0x13), + regmap_reg_range(0x1c, 0x20), + regmap_reg_range(0x44, 0x44), +}; + +static const struct regmap_access_table rt5120_rd_table = { + .yes_ranges = rt5120_rd_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(rt5120_rd_yes_ranges), +}; + +static const struct regmap_access_table rt5120_wr_table = { + .yes_ranges = rt5120_wr_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(rt5120_wr_yes_ranges), +}; + +static const struct regmap_config rt5120_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RT5120_REG_FZCMODE, + + .wr_table = &rt5120_wr_table, + .rd_table = &rt5120_rd_table, +}; + +static const struct regmap_irq rt5120_irqs[] = { + REGMAP_IRQ_REG_LINE(RT5120_INT_HOTDIE, 8), + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_REL, 8), + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_PRESS, 8), +}; + +static const struct regmap_irq_chip rt5120_irq_chip = { + .name = "rt5120-pmic", + .status_base = RT5120_REG_INTSTAT, + .mask_base = RT5120_REG_INTENABLE, + .ack_base = RT5120_REG_INTSTAT, + .mask_invert = true, + .use_ack = true, + .num_regs = 1, + .irqs = rt5120_irqs, + .num_irqs = ARRAY_SIZE(rt5120_irqs), +}; + +static const struct resource rt5120_regulator_resources[] = { + DEFINE_RES_IRQ(RT5120_INT_HOTDIE), +}; + +static const struct resource rt5120_pwrkey_resources[] = { + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_PRESS, "pwrkey-press"), + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_REL, "pwrkey-release"), +}; + +static const struct mfd_cell rt5120_devs[] = { + MFD_CELL_RES("rt5120-regulator", rt5120_regulator_resources), + MFD_CELL_OF("rt5120-pwrkey", rt5120_pwrkey_resources, NULL, 0, 0, "richtek,rt5120-pwrkey"), +}; + +static int rt5120_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; + int ret; + + regmap = devm_regmap_init_i2c(i2c, &rt5120_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to init regmap\n"); + + ret = devm_regmap_add_irq_chip(dev, regmap, i2c->irq, IRQF_ONESHOT, 0, + &rt5120_irq_chip, &irq_data); + if (ret) + return dev_err_probe(dev, ret, "Failed to add IRQ chip\n"); + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, rt5120_devs, + ARRAY_SIZE(rt5120_devs), NULL, 0, + regmap_irq_get_domain(irq_data)); +} + +static const struct of_device_id rt5120_device_match_table[] = { + { .compatible = "richtek,rt5120" }, + {} +}; +MODULE_DEVICE_TABLE(of, rt5120_device_match_table); + +static struct i2c_driver rt5120_driver = { + .driver = { + .name = "rt5120", + .of_match_table = rt5120_device_match_table, + }, + .probe_new = rt5120_probe, +}; +module_i2c_driver(rt5120_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("Richtek RT5120 I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index bc0a2c38653e..3ac4508a6742 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1720,7 +1720,12 @@ static struct platform_driver sm501_plat_driver = { static int __init sm501_base_init(void) { - platform_driver_register(&sm501_plat_driver); + int ret; + + ret = platform_driver_register(&sm501_plat_driver); + if (ret < 0) + return ret; + return pci_register_driver(&sm501_pci_driver); } diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index aeb9ea55f97d..0c4f74197d3e 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -8,14 +8,13 @@ */ #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/export.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/pm.h> #include <linux/slab.h> #include <linux/mfd/core.h> @@ -30,17 +29,12 @@ * @irq_trigger: IRQ trigger to use for the interrupt to the host * @autosleep: bool to enable/disable stmpe autosleep * @autosleep_timeout: inactivity timeout in milliseconds for autosleep - * @irq_over_gpio: true if gpio is used to get irq - * @irq_gpio: gpio number over which irq will be requested (significant only if - * irq_over_gpio is true) */ struct stmpe_platform_data { int id; unsigned int blocks; unsigned int irq_trigger; bool autosleep; - bool irq_over_gpio; - int irq_gpio; int autosleep_timeout; }; @@ -1349,32 +1343,22 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata, if (pdata->id < 0) pdata->id = -1; - pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0, - &pdata->irq_trigger); - if (gpio_is_valid(pdata->irq_gpio)) - pdata->irq_over_gpio = 1; - else - pdata->irq_trigger = IRQF_TRIGGER_NONE; - of_property_read_u32(np, "st,autosleep-timeout", &pdata->autosleep_timeout); pdata->autosleep = (pdata->autosleep_timeout) ? true : false; for_each_available_child_of_node(np, child) { - if (of_node_name_eq(child, "stmpe_gpio")) { + if (of_device_is_compatible(child, stmpe_gpio_cell.of_compatible)) pdata->blocks |= STMPE_BLOCK_GPIO; - } else if (of_node_name_eq(child, "stmpe_keypad")) { + else if (of_device_is_compatible(child, stmpe_keypad_cell.of_compatible)) pdata->blocks |= STMPE_BLOCK_KEYPAD; - } else if (of_node_name_eq(child, "stmpe_touchscreen")) { + else if (of_device_is_compatible(child, stmpe_ts_cell.of_compatible)) pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN; - } else if (of_node_name_eq(child, "stmpe_adc")) { + else if (of_device_is_compatible(child, stmpe_adc_cell.of_compatible)) pdata->blocks |= STMPE_BLOCK_ADC; - } else if (of_node_name_eq(child, "stmpe_pwm")) { + else if (of_device_is_compatible(child, stmpe_pwm_cell.of_compatible)) pdata->blocks |= STMPE_BLOCK_PWM; - } else if (of_node_name_eq(child, "stmpe_rotator")) { - pdata->blocks |= STMPE_BLOCK_ROTATOR; - } } } @@ -1384,6 +1368,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) struct stmpe_platform_data *pdata; struct device_node *np = ci->dev->of_node; struct stmpe *stmpe; + struct gpio_desc *irq_gpio; int ret; u32 val; @@ -1437,18 +1422,20 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) if (ci->init) ci->init(stmpe); - if (pdata->irq_over_gpio) { - ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio, - GPIOF_DIR_IN, "stmpe"); - if (ret) { - dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", - ret); - return ret; - } + irq_gpio = devm_gpiod_get_optional(ci->dev, "irq", GPIOD_ASIS); + ret = PTR_ERR_OR_ZERO(irq_gpio); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", ret); + return ret; + } - stmpe->irq = gpio_to_irq(pdata->irq_gpio); + if (irq_gpio) { + stmpe->irq = gpiod_to_irq(irq_gpio); + pdata->irq_trigger = gpiod_is_active_low(irq_gpio) ? + IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; } else { stmpe->irq = ci->irq; + pdata->irq_trigger = IRQF_TRIGGER_NONE; } if (stmpe->irq < 0) { diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index bdb2ce7ff03b..9489e80e905a 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -66,14 +66,6 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk) goto err_map; } - /* Parse the device's DT node for an endianness specification */ - if (of_property_read_bool(np, "big-endian")) - syscon_config.val_format_endian = REGMAP_ENDIAN_BIG; - else if (of_property_read_bool(np, "little-endian")) - syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE; - else if (of_property_read_bool(np, "native-endian")) - syscon_config.val_format_endian = REGMAP_ENDIAN_NATIVE; - /* * search for reg-io-width property in DT. If it is not provided, * default to 4 bytes. regmap_init_mmio will return an error if values diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 2679c41232e6..f6b4b9d94bbd 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -882,7 +882,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. * * Also, always enable SmartReflex bit as that's needed for omaps to - * to do anything over I2C4 for voltage scaling even if SmartReflex + * do anything over I2C4 for voltage scaling even if SmartReflex * is disabled. Without the SmartReflex bit omap sys_clkreq idle * signal will never trigger for retention idle. */ diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 4f576f0160a9..87496c1cb8bc 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -14,6 +14,7 @@ * by syed khasim <x0khasim@ti.com> */ +#include <linux/device.h> #include <linux/export.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 1aa8323ad9f6..56e70a68679a 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -708,6 +708,12 @@ config CHARGER_BQ256XX charge management and system power path management devices for single cell Li-ion and Li-polymer batteries. +config CHARGER_RK817 + tristate "Rockchip RK817 PMIC Battery Charger" + depends on MFD_RK808 + help + Say Y to include support for Rockchip RK817 Battery Charger. + config CHARGER_SMB347 tristate "Summit Microelectronics SMB3XX Battery Charger" depends on I2C diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 7f02f36aea55..3040a1de81b8 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o obj-$(CONFIG_CHARGER_BQ25980) += bq25980_charger.o obj-$(CONFIG_CHARGER_BQ256XX) += bq256xx_charger.o +obj-$(CONFIG_CHARGER_RK817) += rk817_charger.o obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c new file mode 100644 index 000000000000..635f051b0821 --- /dev/null +++ b/drivers/power/supply/rk817_charger.c @@ -0,0 +1,1211 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Charger Driver for Rockchip rk817 + * + * Copyright (c) 2021 Maya Matuszczyk <maccraft123mc@gmail.com> + * + * Authors: Maya Matuszczyk <maccraft123mc@gmail.com> + * Chris Morgan <macromorgan@hotmail.com> + */ + +#include <asm/unaligned.h> +#include <linux/devm-helpers.h> +#include <linux/mfd/rk808.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +/* Charging statuses reported by hardware register */ +enum rk817_charge_status { + CHRG_OFF, + DEAD_CHRG, + TRICKLE_CHRG, + CC_OR_CV_CHRG, + CHARGE_FINISH, + USB_OVER_VOL, + BAT_TMP_ERR, + BAT_TIM_ERR, +}; + +/* + * Max charging current read to/written from hardware register. + * Note how highest value corresponding to 0x7 is the lowest + * current, this is per the datasheet. + */ +enum rk817_chg_cur { + CHG_1A, + CHG_1_5A, + CHG_2A, + CHG_2_5A, + CHG_2_75A, + CHG_3A, + CHG_3_5A, + CHG_0_5A, +}; + +struct rk817_charger { + struct device *dev; + struct rk808 *rk808; + + struct power_supply *bat_ps; + struct power_supply *chg_ps; + bool plugged_in; + bool battery_present; + + /* + * voltage_k and voltage_b values are used to calibrate the ADC + * voltage readings. While they are documented in the BSP kernel and + * datasheet as voltage_k and voltage_b, there is no further + * information explaining them in more detail. + */ + + uint32_t voltage_k; + uint32_t voltage_b; + + /* + * soc - state of charge - like the BSP this is stored as a percentage, + * to the thousandth. BSP has a display state of charge (dsoc) and a + * remaining state of charge (rsoc). This value will be used for both + * purposes here so we don't do any fancy math to try and "smooth" the + * charge and just report it as it is. Note for example an soc of 100 + * is stored as 100000, an soc of 50 is stored as 50000, etc. + */ + int soc; + + /* + * Capacity of battery when fully charged, equal or less than design + * capacity depending upon wear. BSP kernel saves to nvram in mAh, + * so this value is in mAh not the standard uAh. + */ + int fcc_mah; + + /* + * Calibrate the SOC on a fully charged battery, this way we can use + * the calibrated SOC value to correct for columb counter drift. + */ + bool soc_cal; + + /* Implementation specific immutable properties from device tree */ + int res_div; + int sleep_enter_current_ua; + int sleep_filter_current_ua; + int bat_charge_full_design_uah; + int bat_voltage_min_design_uv; + int bat_voltage_max_design_uv; + + /* Values updated periodically by driver for display. */ + int charge_now_uah; + int volt_avg_uv; + int cur_avg_ua; + int max_chg_cur_ua; + int max_chg_volt_uv; + int charge_status; + int charger_input_volt_avg_uv; + + /* Work queue to periodically update values. */ + struct delayed_work work; +}; + +/* ADC coefficients extracted from BSP kernel */ +#define ADC_TO_CURRENT(adc_value, res_div) \ + (adc_value * 172 / res_div) + +#define CURRENT_TO_ADC(current, samp_res) \ + (current * samp_res / 172) + +#define CHARGE_TO_ADC(capacity, res_div) \ + (capacity * res_div * 3600 / 172 * 1000) + +#define ADC_TO_CHARGE_UAH(adc_value, res_div) \ + (adc_value / 3600 * 172 / res_div) + +static u8 rk817_chg_cur_to_reg(u32 chg_cur_ma) +{ + if (chg_cur_ma >= 3500) + return CHG_3_5A; + else if (chg_cur_ma >= 3000) + return CHG_3A; + else if (chg_cur_ma >= 2750) + return CHG_2_75A; + else if (chg_cur_ma >= 2500) + return CHG_2_5A; + else if (chg_cur_ma >= 2000) + return CHG_2A; + else if (chg_cur_ma >= 1500) + return CHG_1_5A; + else if (chg_cur_ma >= 1000) + return CHG_1A; + else if (chg_cur_ma >= 500) + return CHG_0_5A; + else + return -EINVAL; +} + +static int rk817_chg_cur_from_reg(u8 reg) +{ + switch (reg) { + case CHG_0_5A: + return 500000; + case CHG_1A: + return 1000000; + case CHG_1_5A: + return 1500000; + case CHG_2A: + return 2000000; + case CHG_2_5A: + return 2500000; + case CHG_2_75A: + return 2750000; + case CHG_3A: + return 3000000; + case CHG_3_5A: + return 3500000; + default: + return -EINVAL; + } +} + +static void rk817_bat_calib_vol(struct rk817_charger *charger) +{ + uint32_t vcalib0 = 0; + uint32_t vcalib1 = 0; + u8 bulk_reg[2]; + + /* calibrate voltage */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB0_H, + bulk_reg, 2); + vcalib0 = get_unaligned_be16(bulk_reg); + + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB1_H, + bulk_reg, 2); + vcalib1 = get_unaligned_be16(bulk_reg); + + /* values were taken from BSP kernel */ + charger->voltage_k = (4025 - 2300) * 1000 / + ((vcalib1 - vcalib0) ? (vcalib1 - vcalib0) : 1); + charger->voltage_b = 4025 - (charger->voltage_k * vcalib1) / 1000; +} + +static void rk817_bat_calib_cur(struct rk817_charger *charger) +{ + u8 bulk_reg[2]; + + /* calibrate current */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_IOFFSET_H, + bulk_reg, 2); + regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_CAL_OFFSET_H, + bulk_reg, 2); +} + +/* + * note that only the fcc_mah is really used by this driver, the other values + * are to ensure we can remain backwards compatible with the BSP kernel. + */ +static int rk817_record_battery_nvram_values(struct rk817_charger *charger) +{ + u8 bulk_reg[3]; + int ret, rsoc; + + /* + * write the soc value to the nvram location used by the BSP kernel + * for the dsoc value. + */ + put_unaligned_le24(charger->soc, bulk_reg); + ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_R1, + bulk_reg, 3); + if (ret < 0) + return ret; + /* + * write the remaining capacity in mah to the nvram location used by + * the BSP kernel for the rsoc value. + */ + rsoc = (charger->soc * charger->fcc_mah) / 100000; + put_unaligned_le24(rsoc, bulk_reg); + ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_DATA0, + bulk_reg, 3); + if (ret < 0) + return ret; + /* write the fcc_mah in mAh, just as the BSP kernel does. */ + put_unaligned_le24(charger->fcc_mah, bulk_reg); + ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_DATA3, + bulk_reg, 3); + if (ret < 0) + return ret; + + return 0; +} + +static int rk817_bat_calib_cap(struct rk817_charger *charger) +{ + struct rk808 *rk808 = charger->rk808; + int tmp, charge_now, charge_now_adc, volt_avg; + u8 bulk_reg[4]; + + /* Calibrate the soc and fcc on a fully charged battery */ + + if (charger->charge_status == CHARGE_FINISH && (!charger->soc_cal)) { + /* + * soc should be 100000 and columb counter should show the full + * charge capacity. Note that if the device is unplugged for a + * period of several days the columb counter will have a large + * margin of error, so setting it back to the full charge on + * a completed charge cycle should correct this (my device was + * showing 33% battery after 3 days unplugged when it should + * have been closer to 95% based on voltage and charge + * current). + */ + + charger->soc = 100000; + charge_now_adc = CHARGE_TO_ADC(charger->fcc_mah, + charger->res_div); + put_unaligned_be32(charge_now_adc, bulk_reg); + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3, + bulk_reg, 4); + + charger->soc_cal = 1; + dev_dbg(charger->dev, + "Fully charged. SOC is %d, full capacity is %d\n", + charger->soc, charger->fcc_mah * 1000); + } + + /* + * The columb counter can drift up slightly, so we should correct for + * it. But don't correct it until we're at 100% soc. + */ + if (charger->charge_status == CHARGE_FINISH && charger->soc_cal) { + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + charge_now_adc = get_unaligned_be32(bulk_reg); + if (charge_now_adc < 0) + return charge_now_adc; + charge_now = ADC_TO_CHARGE_UAH(charge_now_adc, + charger->res_div); + + /* + * Re-init columb counter with updated values to correct drift. + */ + if (charge_now / 1000 > charger->fcc_mah) { + dev_dbg(charger->dev, + "Recalibrating columb counter to %d uah\n", + charge_now); + /* + * Order of operations matters here to ensure we keep + * enough precision until the last step to keep from + * making needless updates to columb counter. + */ + charge_now_adc = CHARGE_TO_ADC(charger->fcc_mah, + charger->res_div); + put_unaligned_be32(charge_now_adc, bulk_reg); + regmap_bulk_write(rk808->regmap, + RK817_GAS_GAUGE_Q_INIT_H3, + bulk_reg, 4); + } + } + + /* + * Calibrate the fully charged capacity when we previously had a full + * battery (soc_cal = 1) and are now empty (at or below minimum design + * voltage). If our columb counter is still positive, subtract that + * from our fcc value to get a calibrated fcc, and if our columb + * counter is negative add that to our fcc (but not to exceed our + * design capacity). + */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + volt_avg = (charger->voltage_k * tmp) + 1000 * charger->voltage_b; + if (volt_avg <= charger->bat_voltage_min_design_uv && + charger->soc_cal) { + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + charge_now_adc = get_unaligned_be32(bulk_reg); + charge_now = ADC_TO_CHARGE_UAH(charge_now_adc, + charger->res_div); + /* + * Note, if charge_now is negative this will add it (what we + * want) and if it's positive this will subtract (also what + * we want). + */ + charger->fcc_mah = charger->fcc_mah - (charge_now / 1000); + + dev_dbg(charger->dev, + "Recalibrating full charge capacity to %d uah\n", + charger->fcc_mah * 1000); + } + + rk817_record_battery_nvram_values(charger); + + return 0; +} + +static void rk817_read_props(struct rk817_charger *charger) +{ + int tmp, reg; + u8 bulk_reg[4]; + + /* + * Recalibrate voltage and current readings if we need to BSP does both + * on CUR_CALIB_UPD, ignoring VOL_CALIB_UPD. Curiously enough, both + * documentation and the BSP show that you perform an update if bit 7 + * is 1, but you clear the status by writing a 1 to bit 7. + */ + regmap_read(charger->rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG1, ®); + if (reg & RK817_VOL_CUR_CALIB_UPD) { + rk817_bat_calib_cur(charger); + rk817_bat_calib_vol(charger); + regmap_write_bits(charger->rk808->regmap, + RK817_GAS_GAUGE_ADC_CONFIG1, + RK817_VOL_CUR_CALIB_UPD, + RK817_VOL_CUR_CALIB_UPD); + } + + /* Update reported charge. */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + tmp = get_unaligned_be32(bulk_reg); + charger->charge_now_uah = ADC_TO_CHARGE_UAH(tmp, charger->res_div); + if (charger->charge_now_uah < 0) + charger->charge_now_uah = 0; + if (charger->charge_now_uah > charger->fcc_mah * 1000) + charger->charge_now_uah = charger->fcc_mah * 1000; + + /* Update soc based on reported charge. */ + charger->soc = charger->charge_now_uah * 100 / charger->fcc_mah; + + /* Update reported voltage. */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + charger->volt_avg_uv = (charger->voltage_k * tmp) + 1000 * + charger->voltage_b; + + /* + * Update reported current. Note value from registers is a signed 16 + * bit int. + */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_CUR_H, + bulk_reg, 2); + tmp = (short int)get_unaligned_be16(bulk_reg); + charger->cur_avg_ua = ADC_TO_CURRENT(tmp, charger->res_div); + + /* + * Update the max charge current. This value shouldn't change, but we + * can read it to report what the PMIC says it is instead of simply + * returning the default value. + */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_OUT, ®); + charger->max_chg_cur_ua = + rk817_chg_cur_from_reg(reg & RK817_CHRG_CUR_SEL); + + /* + * Update max charge voltage. Like the max charge current this value + * shouldn't change, but we can report what the PMIC says. + */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_OUT, ®); + charger->max_chg_volt_uv = ((((reg & RK817_CHRG_VOL_SEL) >> 4) * + 50000) + 4100000); + + /* Check if battery still present. */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_STS, ®); + charger->battery_present = (reg & RK817_BAT_EXS); + + /* Get which type of charge we are using (if any). */ + regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_STS, ®); + charger->charge_status = (reg >> 4) & 0x07; + + /* + * Get charger input voltage. Note that on my example hardware (an + * Odroid Go Advance) the voltage of the power connector is measured + * on the register labelled USB in the datasheet; I don't know if this + * is how it is designed or just a quirk of the implementation. I + * believe this will also measure the voltage of the USB output when in + * OTG mode, if that is the case we may need to change this in the + * future to return 0 if the power supply status is offline (I can't + * test this with my current implementation. Also, when the voltage + * should be zero sometimes the ADC still shows a single bit (which + * would register as 20000uv). When this happens set it to 0. + */ + regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_USB_VOL_H, + bulk_reg, 2); + reg = get_unaligned_be16(bulk_reg); + if (reg > 1) { + tmp = ((charger->voltage_k * reg / 1000 + charger->voltage_b) * + 60 / 46); + charger->charger_input_volt_avg_uv = tmp * 1000; + } else { + charger->charger_input_volt_avg_uv = 0; + } + + /* Calibrate battery capacity and soc. */ + rk817_bat_calib_cap(charger); +} + +static int rk817_bat_get_prop(struct power_supply *ps, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct rk817_charger *charger = power_supply_get_drvdata(ps); + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = charger->battery_present; + break; + case POWER_SUPPLY_PROP_STATUS: + if (charger->cur_avg_ua < 0) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + switch (charger->charge_status) { + case CHRG_OFF: + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + /* + * Dead charge is documented, but not explained. I never + * observed it but assume it's a pre-charge for a dead + * battery. + */ + case DEAD_CHRG: + case TRICKLE_CHRG: + case CC_OR_CV_CHRG: + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + case CHARGE_FINISH: + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + default: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + return -EINVAL; + + } + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + switch (charger->charge_status) { + case CHRG_OFF: + case CHARGE_FINISH: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + case TRICKLE_CHRG: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case DEAD_CHRG: + case CC_OR_CV_CHRG: + val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; + break; + } + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = charger->fcc_mah * 1000; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = charger->bat_charge_full_design_uah; + break; + case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: + val->intval = 0; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = charger->charge_now_uah; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = charger->bat_voltage_min_design_uv; + break; + case POWER_SUPPLY_PROP_CAPACITY: + /* Add 500 so that values like 99999 are 100% not 99%. */ + val->intval = (charger->soc + 500) / 1000; + if (val->intval > 100) + val->intval = 100; + if (val->intval < 0) + val->intval = 0; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + val->intval = charger->volt_avg_uv; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + val->intval = charger->cur_avg_ua; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + val->intval = charger->max_chg_cur_ua; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + val->intval = charger->max_chg_volt_uv; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = charger->bat_voltage_max_design_uv; + break; + default: + return -EINVAL; + } + return 0; +} + +static int rk817_chg_get_prop(struct power_supply *ps, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct rk817_charger *charger = power_supply_get_drvdata(ps); + + switch (prop) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = charger->plugged_in; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + /* max voltage from datasheet at 5.5v (default 5.0v) */ + val->intval = 5500000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + /* min voltage from datasheet at 3.8v (default 5.0v) */ + val->intval = 3800000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + val->intval = charger->charger_input_volt_avg_uv; + break; + /* + * While it's possible that other implementations could use different + * USB types, the current implementation for this PMIC (the Odroid Go + * Advance) only uses a dedicated charging port with no rx/tx lines. + */ + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = POWER_SUPPLY_USB_TYPE_DCP; + break; + default: + return -EINVAL; + } + return 0; + +} + +static irqreturn_t rk817_plug_in_isr(int irq, void *cg) +{ + struct rk817_charger *charger; + + charger = (struct rk817_charger *)cg; + charger->plugged_in = 1; + power_supply_changed(charger->chg_ps); + power_supply_changed(charger->bat_ps); + /* try to recalibrate capacity if we hit full charge. */ + charger->soc_cal = 0; + + rk817_read_props(charger); + + dev_dbg(charger->dev, "Power Cord Inserted\n"); + + return IRQ_HANDLED; +} + +static irqreturn_t rk817_plug_out_isr(int irq, void *cg) +{ + struct rk817_charger *charger; + struct rk808 *rk808; + + charger = (struct rk817_charger *)cg; + rk808 = charger->rk808; + charger->plugged_in = 0; + power_supply_changed(charger->bat_ps); + power_supply_changed(charger->chg_ps); + + /* + * For some reason the bits of RK817_PMIC_CHRG_IN reset whenever the + * power cord is unplugged. This was not documented in the BSP kernel + * or the datasheet and only discovered by trial and error. Set minimum + * USB input voltage to 4.5v and enable USB voltage input limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_VLIM_SEL, (0x05 << 4)); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN, + (0x01 << 7)); + + /* + * Set average USB input current limit to 1.5A and enable USB current + * input limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_ILIM_SEL, 0x03); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN, + (0x01 << 3)); + + rk817_read_props(charger); + + dev_dbg(charger->dev, "Power Cord Removed\n"); + + return IRQ_HANDLED; +} + +static enum power_supply_property rk817_bat_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, +}; + +static enum power_supply_property rk817_chg_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_AVG, +}; + +static enum power_supply_usb_type rk817_usb_type[] = { + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_UNKNOWN, +}; + +static const struct power_supply_desc rk817_bat_desc = { + .name = "rk817-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = rk817_bat_props, + .num_properties = ARRAY_SIZE(rk817_bat_props), + .get_property = rk817_bat_get_prop, +}; + +static const struct power_supply_desc rk817_chg_desc = { + .name = "rk817-charger", + .type = POWER_SUPPLY_TYPE_USB, + .usb_types = rk817_usb_type, + .num_usb_types = ARRAY_SIZE(rk817_usb_type), + .properties = rk817_chg_props, + .num_properties = ARRAY_SIZE(rk817_chg_props), + .get_property = rk817_chg_get_prop, +}; + +static int rk817_read_battery_nvram_values(struct rk817_charger *charger) +{ + u8 bulk_reg[3]; + int ret; + + /* Read the nvram data for full charge capacity. */ + ret = regmap_bulk_read(charger->rk808->regmap, + RK817_GAS_GAUGE_DATA3, bulk_reg, 3); + if (ret < 0) + return ret; + charger->fcc_mah = get_unaligned_le24(bulk_reg); + + /* + * Sanity checking for values equal to zero or less than would be + * practical for this device (BSP Kernel assumes 500mAH or less) for + * practicality purposes. Also check if the value is too large and + * correct it. + */ + if ((charger->fcc_mah < 500) || + ((charger->fcc_mah * 1000) > charger->bat_charge_full_design_uah)) { + dev_info(charger->dev, + "Invalid NVRAM max charge, setting to %u uAH\n", + charger->bat_charge_full_design_uah); + charger->fcc_mah = charger->bat_charge_full_design_uah / 1000; + } + + /* + * Read the nvram for state of charge. Sanity check for values greater + * than 100 (10000). If the value is off it should get corrected + * automatically when the voltage drops to the min (soc is 0) or when + * the battery is full (soc is 100). + */ + ret = regmap_bulk_read(charger->rk808->regmap, + RK817_GAS_GAUGE_BAT_R1, bulk_reg, 3); + if (ret < 0) + return ret; + charger->soc = get_unaligned_le24(bulk_reg); + if (charger->soc > 10000) + charger->soc = 10000; + + return 0; +} + +static int +rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger, + struct power_supply_battery_info *bat_info) +{ + struct rk808 *rk808 = charger->rk808; + u8 bulk_reg[4]; + u32 boot_voltage, boot_charge_mah, tmp; + int ret, reg, off_time; + bool first_boot; + + /* + * Check if the battery is uninitalized. If it is, the columb counter + * needs to be set up. + */ + ret = regmap_read(rk808->regmap, RK817_GAS_GAUGE_GG_STS, ®); + if (ret < 0) + return ret; + first_boot = reg & RK817_BAT_CON; + /* + * If the battery is uninitialized, use the poweron voltage and an ocv + * lookup to guess our charge. The number won't be very accurate until + * we hit either our minimum voltage (0%) or full charge (100%). + */ + if (first_boot) { + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + + 1000 * charger->voltage_b; + /* + * Since only implementation has no working thermistor, assume + * 20C for OCV lookup. If lookup fails, report error with OCV + * table. + */ + charger->soc = power_supply_batinfo_ocv2cap(bat_info, + boot_voltage, + 20) * 1000; + if (charger->soc < 0) + charger->soc = 0; + + /* Guess that full charge capacity is the design capacity */ + charger->fcc_mah = charger->bat_charge_full_design_uah / 1000; + /* + * Set battery as "set up". BSP driver uses this value even + * though datasheet claims it's a read-only value. + */ + regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS, + RK817_BAT_CON, 0); + /* Save nvram values */ + ret = rk817_record_battery_nvram_values(charger); + if (ret < 0) + return ret; + } else { + ret = rk817_read_battery_nvram_values(charger); + if (ret < 0) + return ret; + + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + tmp = get_unaligned_be32(bulk_reg); + if (tmp < 0) + tmp = 0; + boot_charge_mah = ADC_TO_CHARGE_UAH(tmp, + charger->res_div) / 1000; + /* + * Check if the columb counter has been off for more than 300 + * minutes as it tends to drift downward. If so, re-init soc + * with the boot voltage instead. Note the unit values for the + * OFF_CNT register appear to be in decaminutes and stops + * counting at 2550 (0xFF) minutes. BSP kernel used OCV, but + * for me occasionally that would show invalid values. Boot + * voltage is only accurate for me on first poweron (not + * reboots), but we shouldn't ever encounter an OFF_CNT more + * than 0 on a reboot anyway. + */ + regmap_read(rk808->regmap, RK817_GAS_GAUGE_OFF_CNT, &off_time); + if (off_time >= 30) { + regmap_bulk_read(rk808->regmap, + RK817_GAS_GAUGE_PWRON_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + + 1000 * charger->voltage_b; + charger->soc = + power_supply_batinfo_ocv2cap(bat_info, + boot_voltage, + 20) * 1000; + } else { + charger->soc = (boot_charge_mah * 1000 * 100 / + charger->fcc_mah); + } + } + + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b; + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3, + bulk_reg, 4); + tmp = get_unaligned_be32(bulk_reg); + if (tmp < 0) + tmp = 0; + boot_charge_mah = ADC_TO_CHARGE_UAH(tmp, charger->res_div) / 1000; + regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_OCV_VOL_H, + bulk_reg, 2); + tmp = get_unaligned_be16(bulk_reg); + boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b; + + /* + * Now we have our full charge capacity and soc, init the columb + * counter. + */ + boot_charge_mah = charger->soc * charger->fcc_mah / 100 / 1000; + if (boot_charge_mah > charger->fcc_mah) + boot_charge_mah = charger->fcc_mah; + tmp = CHARGE_TO_ADC(boot_charge_mah, charger->res_div); + put_unaligned_be32(tmp, bulk_reg); + ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3, + bulk_reg, 4); + if (ret < 0) + return ret; + + /* Set QMAX value to max design capacity. */ + tmp = CHARGE_TO_ADC((charger->bat_charge_full_design_uah / 1000), + charger->res_div); + put_unaligned_be32(tmp, bulk_reg); + ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_MAX_H3, + bulk_reg, 4); + if (ret < 0) + return ret; + + return 0; +} + +static int rk817_battery_init(struct rk817_charger *charger, + struct power_supply_battery_info *bat_info) +{ + struct rk808 *rk808 = charger->rk808; + u32 tmp, max_chg_vol_mv, max_chg_cur_ma; + u8 max_chg_vol_reg, chg_term_i_reg, max_chg_cur_reg; + int ret, chg_term_ma; + u8 bulk_reg[2]; + + /* Get initial plug state */ + regmap_read(rk808->regmap, RK817_SYS_STS, &tmp); + charger->plugged_in = (tmp & RK817_PLUG_IN_STS); + + /* + * Turn on all ADC functions to measure battery, USB, and sys voltage, + * as well as batt temp. Note only tested implementation so far does + * not use a battery with a thermistor. + */ + regmap_write(rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG0, 0xfc); + + /* + * Set relax mode voltage sampling interval and ADC offset calibration + * interval to 8 minutes to mirror BSP kernel. Set voltage and current + * modes to average to mirror BSP kernel. + */ + regmap_write(rk808->regmap, RK817_GAS_GAUGE_GG_CON, 0x04); + + /* Calibrate voltage like the BSP does here. */ + rk817_bat_calib_vol(charger); + + /* Write relax threshold, derived from sleep enter current. */ + tmp = CURRENT_TO_ADC(charger->sleep_enter_current_ua, + charger->res_div); + put_unaligned_be16(tmp, bulk_reg); + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_RELAX_THRE_H, + bulk_reg, 2); + + /* Write sleep sample current, derived from sleep filter current. */ + tmp = CURRENT_TO_ADC(charger->sleep_filter_current_ua, + charger->res_div); + put_unaligned_be16(tmp, bulk_reg); + regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_H, + bulk_reg, 2); + + /* Restart battery relax voltage */ + regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS, + RK817_RELAX_VOL_UPD, (0x0 << 2)); + + /* + * Set OCV Threshold Voltage to 127.5mV. This was hard coded like this + * in the BSP. + */ + regmap_write(rk808->regmap, RK817_GAS_GAUGE_OCV_THRE_VOL, 0xff); + + /* + * Set maximum charging voltage to battery max voltage. Trying to be + * incredibly safe with these value, as setting them wrong could + * overcharge the battery, which would be very bad. + */ + max_chg_vol_mv = bat_info->constant_charge_voltage_max_uv / 1000; + max_chg_cur_ma = bat_info->constant_charge_current_max_ua / 1000; + + if (max_chg_vol_mv < 4100) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger voltage, value %u unsupported\n", + max_chg_vol_mv * 1000); + } + if (max_chg_vol_mv > 4450) { + dev_info(charger->dev, + "Setting max charge voltage to 4450000uv\n"); + max_chg_vol_mv = 4450; + } + + if (max_chg_cur_ma < 500) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger current, value %u unsupported\n", + max_chg_cur_ma * 1000); + } + if (max_chg_cur_ma > 3500) + dev_info(charger->dev, + "Setting max charge current to 3500000ua\n"); + + /* + * Now that the values are sanity checked, if we subtract 4100 from the + * max voltage and divide by 50, we conviently get the exact value for + * the registers, which are 4.1v, 4.15v, 4.2v, 4.25v, 4.3v, 4.35v, + * 4.4v, and 4.45v; these correspond to values 0x00 through 0x07. + */ + max_chg_vol_reg = (max_chg_vol_mv - 4100) / 50; + + max_chg_cur_reg = rk817_chg_cur_to_reg(max_chg_cur_ma); + + if (max_chg_vol_reg < 0 || max_chg_vol_reg > 7) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger voltage, value %u unsupported\n", + max_chg_vol_mv * 1000); + } + if (max_chg_cur_reg < 0 || max_chg_cur_reg > 7) { + return dev_err_probe(charger->dev, -EINVAL, + "invalid max charger current, value %u unsupported\n", + max_chg_cur_ma * 1000); + } + + /* + * Write the values to the registers, and deliver an emergency warning + * in the event they are not written correctly. + */ + ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT, + RK817_CHRG_VOL_SEL, (max_chg_vol_reg << 4)); + if (ret) { + dev_emerg(charger->dev, + "Danger, unable to set max charger voltage: %u\n", + ret); + } + + ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT, + RK817_CHRG_CUR_SEL, max_chg_cur_reg); + if (ret) { + dev_emerg(charger->dev, + "Danger, unable to set max charger current: %u\n", + ret); + } + + /* Set charge finishing mode to analog */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM, + RK817_CHRG_TERM_ANA_DIG, (0x0 << 2)); + + /* + * Set charge finish current, warn if value not in range and keep + * default. + */ + chg_term_ma = bat_info->charge_term_current_ua / 1000; + if (chg_term_ma < 150 || chg_term_ma > 400) { + dev_warn(charger->dev, + "Invalid charge termination %u, keeping default\n", + chg_term_ma * 1000); + chg_term_ma = 200; + } + + /* + * Values of 150ma, 200ma, 300ma, and 400ma correspond to 00, 01, 10, + * and 11. + */ + chg_term_i_reg = (chg_term_ma - 100) / 100; + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM, + RK817_CHRG_TERM_ANA_SEL, chg_term_i_reg); + + ret = rk817_read_or_set_full_charge_on_boot(charger, bat_info); + if (ret < 0) + return ret; + + /* + * Set minimum USB input voltage to 4.5v and enable USB voltage input + * limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_VLIM_SEL, (0x05 << 4)); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN, + (0x01 << 7)); + + /* + * Set average USB input current limit to 1.5A and enable USB current + * input limit. + */ + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, + RK817_USB_ILIM_SEL, 0x03); + regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN, + (0x01 << 3)); + + return 0; +} + +static void rk817_charging_monitor(struct work_struct *work) +{ + struct rk817_charger *charger; + + charger = container_of(work, struct rk817_charger, work.work); + + rk817_read_props(charger); + + /* Run every 8 seconds like the BSP driver did. */ + queue_delayed_work(system_wq, &charger->work, msecs_to_jiffies(8000)); +} + +static int rk817_charger_probe(struct platform_device *pdev) +{ + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); + struct rk817_charger *charger; + struct device_node *node; + struct power_supply_battery_info *bat_info; + struct device *dev = &pdev->dev; + struct power_supply_config pscfg = {}; + int plugin_irq, plugout_irq; + int of_value; + int ret; + + node = of_get_child_by_name(dev->parent->of_node, "charger"); + if (!node) + return -ENODEV; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->rk808 = rk808; + + charger->dev = &pdev->dev; + platform_set_drvdata(pdev, charger); + + rk817_bat_calib_vol(charger); + + pscfg.drv_data = charger; + pscfg.of_node = node; + + /* + * Get sample resistor value. Note only values of 10000 or 20000 + * microohms are allowed. Schematic for my test implementation (an + * Odroid Go Advance) shows a 10 milliohm resistor for reference. + */ + ret = of_property_read_u32(node, "rockchip,resistor-sense-micro-ohms", + &of_value); + if (ret < 0) { + return dev_err_probe(dev, ret, + "Error reading sample resistor value\n"); + } + /* + * Store as a 1 or a 2, since all we really use the value for is as a + * divisor in some calculations. + */ + charger->res_div = (of_value == 20000) ? 2 : 1; + + /* + * Get sleep enter current value. Not sure what this value is for + * other than to help calibrate the relax threshold. + */ + ret = of_property_read_u32(node, + "rockchip,sleep-enter-current-microamp", + &of_value); + if (ret < 0) { + return dev_err_probe(dev, ret, + "Error reading sleep enter cur value\n"); + } + charger->sleep_enter_current_ua = of_value; + + /* Get sleep filter current value */ + ret = of_property_read_u32(node, + "rockchip,sleep-filter-current-microamp", + &of_value); + if (ret < 0) { + return dev_err_probe(dev, ret, + "Error reading sleep filter cur value\n"); + } + + charger->sleep_filter_current_ua = of_value; + + charger->bat_ps = devm_power_supply_register(&pdev->dev, + &rk817_bat_desc, &pscfg); + + charger->chg_ps = devm_power_supply_register(&pdev->dev, + &rk817_chg_desc, &pscfg); + + if (IS_ERR(charger->chg_ps)) + return dev_err_probe(dev, -EINVAL, + "Battery failed to probe\n"); + + if (IS_ERR(charger->chg_ps)) + return dev_err_probe(dev, -EINVAL, + "Charger failed to probe\n"); + + ret = power_supply_get_battery_info(charger->bat_ps, + &bat_info); + if (ret) { + return dev_err_probe(dev, ret, + "Unable to get battery info: %d\n", ret); + } + + if ((bat_info->charge_full_design_uah <= 0) || + (bat_info->voltage_min_design_uv <= 0) || + (bat_info->voltage_max_design_uv <= 0) || + (bat_info->constant_charge_voltage_max_uv <= 0) || + (bat_info->constant_charge_current_max_ua <= 0) || + (bat_info->charge_term_current_ua <= 0)) { + return dev_err_probe(dev, -EINVAL, + "Required bat info missing or invalid\n"); + } + + charger->bat_charge_full_design_uah = bat_info->charge_full_design_uah; + charger->bat_voltage_min_design_uv = bat_info->voltage_min_design_uv; + charger->bat_voltage_max_design_uv = bat_info->voltage_max_design_uv; + + /* + * Has to run after power_supply_get_battery_info as it depends on some + * values discovered from that routine. + */ + ret = rk817_battery_init(charger, bat_info); + if (ret) + return ret; + + power_supply_put_battery_info(charger->bat_ps, bat_info); + + plugin_irq = platform_get_irq(pdev, 0); + if (plugin_irq < 0) + return plugin_irq; + + plugout_irq = platform_get_irq(pdev, 1); + if (plugout_irq < 0) + return plugout_irq; + + ret = devm_request_threaded_irq(charger->dev, plugin_irq, NULL, + rk817_plug_in_isr, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "rk817_plug_in", charger); + if (ret) { + return dev_err_probe(&pdev->dev, ret, + "plug_in_irq request failed!\n"); + } + + ret = devm_request_threaded_irq(charger->dev, plugout_irq, NULL, + rk817_plug_out_isr, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "rk817_plug_out", charger); + if (ret) { + return dev_err_probe(&pdev->dev, ret, + "plug_out_irq request failed!\n"); + } + + ret = devm_delayed_work_autocancel(&pdev->dev, &charger->work, + rk817_charging_monitor); + if (ret) + return ret; + + /* Force the first update immediately. */ + mod_delayed_work(system_wq, &charger->work, 0); + + return 0; +} + + +static struct platform_driver rk817_charger_driver = { + .probe = rk817_charger_probe, + .driver = { + .name = "rk817-charger", + }, +}; +module_platform_driver(rk817_charger_driver); + +MODULE_DESCRIPTION("Battery power supply driver for RK817 PMIC"); +MODULE_AUTHOR("Maya Matuszczyk <maccraft123mc@gmail.com>"); +MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index d663ab9670fe..070e4403c6c2 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1282,6 +1282,7 @@ config REGULATOR_STW481X_VMMC config REGULATOR_SY7636A tristate "Silergy SY7636A voltage regulator" + depends on MFD_SY7636A help This driver supports Silergy SY3686A voltage regulator. diff --git a/include/dt-bindings/iio/adc/mediatek,mt6370_adc.h b/include/dt-bindings/iio/adc/mediatek,mt6370_adc.h new file mode 100644 index 000000000000..6ee725547763 --- /dev/null +++ b/include/dt-bindings/iio/adc/mediatek,mt6370_adc.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_MEDIATEK_MT6370_ADC_H__ +#define __DT_BINDINGS_MEDIATEK_MT6370_ADC_H__ + +/* ADC Channel Index */ +#define MT6370_CHAN_VBUSDIV5 0 +#define MT6370_CHAN_VBUSDIV2 1 +#define MT6370_CHAN_VSYS 2 +#define MT6370_CHAN_VBAT 3 +#define MT6370_CHAN_TS_BAT 4 +#define MT6370_CHAN_IBUS 5 +#define MT6370_CHAN_IBAT 6 +#define MT6370_CHAN_CHG_VDDP 7 +#define MT6370_CHAN_TEMP_JC 8 +#define MT6370_CHAN_MAX 9 + +#endif diff --git a/include/linux/htcpld.h b/include/linux/htcpld.h index 842fce69ac06..5f8ac9b1d724 100644 --- a/include/linux/htcpld.h +++ b/include/linux/htcpld.h @@ -13,8 +13,6 @@ struct htcpld_chip_platform_data { }; struct htcpld_core_platform_data { - unsigned int int_reset_gpio_hi; - unsigned int int_reset_gpio_lo; unsigned int i2c_adapter_id; struct htcpld_chip_platform_data *chip; diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h index 58602032e642..9af1f3105f80 100644 --- a/include/linux/mfd/rk808.h +++ b/include/linux/mfd/rk808.h @@ -519,6 +519,77 @@ enum rk809_reg_id { #define MIC_DIFF_DIS (0x0 << 7) #define MIC_DIFF_EN (0x1 << 7) +/* RK817 Battery Registers */ +#define RK817_GAS_GAUGE_ADC_CONFIG0 0x50 +#define RK817_GG_EN (0x1 << 7) +#define RK817_SYS_VOL_ADC_EN (0x1 << 6) +#define RK817_TS_ADC_EN (0x1 << 5) +#define RK817_USB_VOL_ADC_EN (0x1 << 4) +#define RK817_BAT_VOL_ADC_EN (0x1 << 3) +#define RK817_BAT_CUR_ADC_EN (0x1 << 2) + +#define RK817_GAS_GAUGE_ADC_CONFIG1 0x55 + +#define RK817_VOL_CUR_CALIB_UPD BIT(7) + +#define RK817_GAS_GAUGE_GG_CON 0x56 +#define RK817_GAS_GAUGE_GG_STS 0x57 + +#define RK817_BAT_CON (0x1 << 4) +#define RK817_RELAX_VOL_UPD (0x3 << 2) +#define RK817_RELAX_STS (0x1 << 1) + +#define RK817_GAS_GAUGE_RELAX_THRE_H 0x58 +#define RK817_GAS_GAUGE_RELAX_THRE_L 0x59 +#define RK817_GAS_GAUGE_OCV_THRE_VOL 0x62 +#define RK817_GAS_GAUGE_OCV_VOL_H 0x63 +#define RK817_GAS_GAUGE_OCV_VOL_L 0x64 +#define RK817_GAS_GAUGE_PWRON_VOL_H 0x6b +#define RK817_GAS_GAUGE_PWRON_VOL_L 0x6c +#define RK817_GAS_GAUGE_PWRON_CUR_H 0x6d +#define RK817_GAS_GAUGE_PWRON_CUR_L 0x6e +#define RK817_GAS_GAUGE_OFF_CNT 0x6f +#define RK817_GAS_GAUGE_Q_INIT_H3 0x70 +#define RK817_GAS_GAUGE_Q_INIT_H2 0x71 +#define RK817_GAS_GAUGE_Q_INIT_L1 0x72 +#define RK817_GAS_GAUGE_Q_INIT_L0 0x73 +#define RK817_GAS_GAUGE_Q_PRES_H3 0x74 +#define RK817_GAS_GAUGE_Q_PRES_H2 0x75 +#define RK817_GAS_GAUGE_Q_PRES_L1 0x76 +#define RK817_GAS_GAUGE_Q_PRES_L0 0x77 +#define RK817_GAS_GAUGE_BAT_VOL_H 0x78 +#define RK817_GAS_GAUGE_BAT_VOL_L 0x79 +#define RK817_GAS_GAUGE_BAT_CUR_H 0x7a +#define RK817_GAS_GAUGE_BAT_CUR_L 0x7b +#define RK817_GAS_GAUGE_USB_VOL_H 0x7e +#define RK817_GAS_GAUGE_USB_VOL_L 0x7f +#define RK817_GAS_GAUGE_SYS_VOL_H 0x80 +#define RK817_GAS_GAUGE_SYS_VOL_L 0x81 +#define RK817_GAS_GAUGE_Q_MAX_H3 0x82 +#define RK817_GAS_GAUGE_Q_MAX_H2 0x83 +#define RK817_GAS_GAUGE_Q_MAX_L1 0x84 +#define RK817_GAS_GAUGE_Q_MAX_L0 0x85 +#define RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_H 0x8f +#define RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_L 0x90 +#define RK817_GAS_GAUGE_CAL_OFFSET_H 0x91 +#define RK817_GAS_GAUGE_CAL_OFFSET_L 0x92 +#define RK817_GAS_GAUGE_VCALIB0_H 0x93 +#define RK817_GAS_GAUGE_VCALIB0_L 0x94 +#define RK817_GAS_GAUGE_VCALIB1_H 0x95 +#define RK817_GAS_GAUGE_VCALIB1_L 0x96 +#define RK817_GAS_GAUGE_IOFFSET_H 0x97 +#define RK817_GAS_GAUGE_IOFFSET_L 0x98 +#define RK817_GAS_GAUGE_BAT_R1 0x9a +#define RK817_GAS_GAUGE_BAT_R2 0x9b +#define RK817_GAS_GAUGE_BAT_R3 0x9c +#define RK817_GAS_GAUGE_DATA0 0x9d +#define RK817_GAS_GAUGE_DATA1 0x9e +#define RK817_GAS_GAUGE_DATA2 0x9f +#define RK817_GAS_GAUGE_DATA3 0xa0 +#define RK817_GAS_GAUGE_DATA4 0xa1 +#define RK817_GAS_GAUGE_DATA5 0xa2 +#define RK817_GAS_GAUGE_CUR_ADC_K0 0xb0 + #define RK817_POWER_EN_REG(i) (0xb1 + (i)) #define RK817_POWER_SLP_EN_REG(i) (0xb5 + (i)) @@ -544,10 +615,30 @@ enum rk809_reg_id { #define RK817_LDO_ON_VSEL_REG(idx) (0xcc + (idx) * 2) #define RK817_BOOST_OTG_CFG (0xde) +#define RK817_PMIC_CHRG_OUT 0xe4 +#define RK817_CHRG_VOL_SEL (0x07 << 4) +#define RK817_CHRG_CUR_SEL (0x07 << 0) + +#define RK817_PMIC_CHRG_IN 0xe5 +#define RK817_USB_VLIM_EN (0x01 << 7) +#define RK817_USB_VLIM_SEL (0x07 << 4) +#define RK817_USB_ILIM_EN (0x01 << 3) +#define RK817_USB_ILIM_SEL (0x07 << 0) +#define RK817_PMIC_CHRG_TERM 0xe6 +#define RK817_CHRG_TERM_ANA_DIG (0x01 << 2) +#define RK817_CHRG_TERM_ANA_SEL (0x03 << 0) +#define RK817_CHRG_EN (0x01 << 6) + +#define RK817_PMIC_CHRG_STS 0xeb +#define RK817_BAT_EXS BIT(7) +#define RK817_CHG_STS (0x07 << 4) + #define RK817_ID_MSB 0xed #define RK817_ID_LSB 0xee #define RK817_SYS_STS 0xf0 +#define RK817_PLUG_IN_STS (0x1 << 6) + #define RK817_SYS_CFG(i) (0xf1 + (i)) #define RK817_ON_SOURCE_REG 0xf5 |