diff options
166 files changed, 8064 insertions, 3259 deletions
diff --git a/Documentation/DocBook/rapidio.tmpl b/Documentation/DocBook/rapidio.tmpl index 50479360d845..ac3cca3399a1 100644 --- a/Documentation/DocBook/rapidio.tmpl +++ b/Documentation/DocBook/rapidio.tmpl @@ -129,9 +129,6 @@ <sect1 id="Device_model_support"><title>Device model support</title> !Idrivers/rapidio/rio-driver.c </sect1> - <sect1 id="Sysfs_support"><title>Sysfs support</title> -!Idrivers/rapidio/rio-sysfs.c - </sect1> <sect1 id="PPC32_support"><title>PPC32 support</title> !Iarch/powerpc/sysdev/fsl_rio.c </sect1> diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt new file mode 100644 index 000000000000..2aa24b889923 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt @@ -0,0 +1,45 @@ +DT bindings for the Hitachi HD44780 Character LCD Controller + +The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs +that can display one or more lines of text. It exposes an M6800 bus interface, +which can be used in either 4-bit or 8-bit mode. + +Required properties: + - compatible: Must contain "hit,hd44780", + - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers, + referring to the GPIO pins connected to the data signal lines DB0-DB7 + (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface, + - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin + connected to the "E" (Enable) signal line of the LCD Controller's bus + interface, + - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin + connected to the "RS" (Register Select) signal line of the LCD Controller's + bus interface, + - display-height-chars: Height of the display, in character cells, + - display-width-chars: Width of the display, in character cells. + +Optional properties: + - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin + connected to the "RW" (Read/Write) signal line of the LCD Controller's bus + interface, + - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin + used for enabling the LCD's backlight, + - internal-buffer-width: Internal buffer width (default is 40 for displays + with 1 or 2 lines, and display-width-chars for displays with more than 2 + lines). + +Example: + + auxdisplay { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; + }; diff --git a/Documentation/devicetree/bindings/firmware/coreboot.txt b/Documentation/devicetree/bindings/firmware/coreboot.txt new file mode 100644 index 000000000000..4c955703cea8 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/coreboot.txt @@ -0,0 +1,33 @@ +COREBOOT firmware information + +The device tree node to communicate the location of coreboot's memory-resident +bookkeeping structures to the kernel. Since coreboot itself cannot boot a +device-tree-based kernel (yet), this node needs to be inserted by a +second-stage bootloader (a coreboot "payload"). + +Required properties: + - compatible: Should be "coreboot" + - reg: Address and length of the following two memory regions, in order: + 1.) The coreboot table. This is a list of variable-sized descriptors + that contain various compile- and run-time generated firmware + parameters. It is identified by the magic string "LBIO" in its first + four bytes. + See coreboot's src/commonlib/include/commonlib/coreboot_tables.h for + details. + 2.) The CBMEM area. This is a downward-growing memory region used by + coreboot to dynamically allocate data structures that remain resident. + It may or may not include the coreboot table as one of its members. It + is identified by a root node descriptor with the magic number + 0xc0389481 that resides in the topmost 8 bytes of the area. + See coreboot's src/include/imd.h for details. + +Example: + firmware { + ranges; + + coreboot { + compatible = "coreboot"; + reg = <0xfdfea000 0x264>, + <0xfdfea000 0x16000>; + } + }; diff --git a/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt b/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt new file mode 100644 index 000000000000..52a294cf2730 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt @@ -0,0 +1,12 @@ +Altera Arria10 Partial Reconfiguration IP + +Required properties: +- compatible : should contain "altr,a10-pr-ip" +- reg : base address and size for memory mapped io. + +Example: + + fpga_mgr: fpga-mgr@ff20c000 { + compatible = "altr,a10-pr-ip"; + reg = <0xff20c000 0x10>; + }; diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index 3b32ba15a717..81bf3adba24b 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -186,6 +186,7 @@ Optional properties: otherwise full reconfiguration is done. - external-fpga-config : boolean, set if the FPGA has already been configured prior to OS boot up. +- encrypted-fpga-config : boolean, set if the bitstream is encrypted - region-unfreeze-timeout-us : The maximum time in microseconds to wait for bridges to successfully become enabled after the region has been programmed. diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt new file mode 100644 index 000000000000..4dc412437b08 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt @@ -0,0 +1,21 @@ +Lattice iCE40 FPGA Manager + +Required properties: +- compatible: Should contain "lattice,ice40-fpga-mgr" +- reg: SPI chip select +- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000) +- cdone-gpios: GPIO input connected to CDONE pin +- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note + that unless the GPIO is held low during startup, the + FPGA will enter Master SPI mode and drive SCK with a + clock signal potentially jamming other devices on the + bus until the firmware is loaded. + +Example: + fpga: fpga@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <1000000>; + cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt new file mode 100644 index 000000000000..9766f7472f51 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt @@ -0,0 +1,44 @@ +Xilinx Slave Serial SPI FPGA Manager + +Xilinx Spartan-6 FPGAs support a method of loading the bitstream over +what is referred to as "slave serial" interface. +The slave serial link is not technically SPI, and might require extra +circuits in order to play nicely with other SPI slaves on the same bus. + +See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf + +Required properties: +- compatible: should contain "xlnx,fpga-slave-serial" +- reg: spi chip select of the FPGA +- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual) +- done-gpios: config status pin (referred to as DONE in the manual) + +Example for full FPGA configuration: + + fpga-region0 { + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr_spi>; + #address-cells = <0x1>; + #size-cells = <0x1>; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "okay"; + + fpga_mgr_spi: fpga-mgr@0 { + compatible = "xlnx,fpga-slave-serial"; + spi-max-frequency = <60000000>; + spi-cpha; + reg = <0>; + done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index d543ed3f5363..ef06d061913c 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -1,7 +1,11 @@ Allwinner sunxi-sid Required properties: -- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" +- compatible: Should be one of the following: + "allwinner,sun4i-a10-sid" + "allwinner,sun7i-a20-sid" + "allwinner,sun8i-h3-sid" + - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.txt b/Documentation/devicetree/bindings/nvmem/imx-iim.txt new file mode 100644 index 000000000000..1978c5bcd96d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/imx-iim.txt @@ -0,0 +1,22 @@ +Freescale i.MX IC Identification Module (IIM) device tree bindings + +This binding represents the IC Identification Module (IIM) found on +i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. + +Required properties: +- compatible: should be one of + "fsl,imx25-iim", "fsl,imx27-iim", + "fsl,imx31-iim", "fsl,imx35-iim", + "fsl,imx51-iim", "fsl,imx53-iim", +- reg: Should contain the register base and length. +- interrupts: Should contain the interrupt for the IIM +- clocks: Should contain a phandle pointing to the gated peripheral clock. + +Example: + + iim: iim@63f98000 { + compatible = "fsl,imx53-iim", "fsl,imx27-iim"; + reg = <0x63f98000 0x4000>; + interrupts = <69>; + clocks = <&clks IMX5_CLK_IIM_GATE>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 966a72ecc6bd..70d791b03ea1 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -9,14 +9,19 @@ Required properties: "fsl,imx6sl-ocotp" (i.MX6SL), or "fsl,imx6sx-ocotp" (i.MX6SX), "fsl,imx6ul-ocotp" (i.MX6UL), + "fsl,imx7d-ocotp" (i.MX7D/S), followed by "syscon". - reg: Should contain the register base and length. - clocks: Should contain a phandle pointing to the gated peripheral clock. +Optional properties: +- read-only: disable write access + Example: ocotp: ocotp@021bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; + read-only; }; diff --git a/Documentation/driver-api/vme.rst b/Documentation/driver-api/vme.rst index 89776fb3c8bd..def139c13410 100644 --- a/Documentation/driver-api/vme.rst +++ b/Documentation/driver-api/vme.rst @@ -6,36 +6,15 @@ Driver registration As with other subsystems within the Linux kernel, VME device drivers register with the VME subsystem, typically called from the devices init routine. This is -achieved via a call to the following function: +achieved via a call to :c:func:`vme_register_driver`. -.. code-block:: c - - int vme_register_driver (struct vme_driver *driver, unsigned int ndevs); +A pointer to a structure of type :c:type:`struct vme_driver <vme_driver>` must +be provided to the registration function. Along with the maximum number of +devices your driver is able to support. -If driver registration is successful this function returns zero, if an error -occurred a negative error code will be returned. - -A pointer to a structure of type 'vme_driver' must be provided to the -registration function. Along with ndevs, which is the number of devices your -driver is able to support. The structure is as follows: - -.. code-block:: c - - struct vme_driver { - struct list_head node; - const char *name; - int (*match)(struct vme_dev *); - int (*probe)(struct vme_dev *); - int (*remove)(struct vme_dev *); - void (*shutdown)(void); - struct device_driver driver; - struct list_head devices; - unsigned int ndev; - }; - -At the minimum, the '.name', '.match' and '.probe' elements of this structure -should be correctly set. The '.name' element is a pointer to a string holding -the device driver's name. +At the minimum, the '.name', '.match' and '.probe' elements of +:c:type:`struct vme_driver <vme_driver>` should be correctly set. The '.name' +element is a pointer to a string holding the device driver's name. The '.match' function allows control over which VME devices should be registered with the driver. The match function should return 1 if a device should be @@ -54,29 +33,16 @@ the number of devices probed to one: } The '.probe' element should contain a pointer to the probe routine. The -probe routine is passed a 'struct vme_dev' pointer as an argument. The -'struct vme_dev' structure looks like the following: - -.. code-block:: c - - struct vme_dev { - int num; - struct vme_bridge *bridge; - struct device dev; - struct list_head drv_list; - struct list_head bridge_list; - }; +probe routine is passed a :c:type:`struct vme_dev <vme_dev>` pointer as an +argument. Here, the 'num' field refers to the sequential device ID for this specific driver. The bridge number (or bus number) can be accessed using dev->bridge->num. -A function is also provided to unregister the driver from the VME core and is -usually called from the device driver's exit routine: - -.. code-block:: c - - void vme_unregister_driver (struct vme_driver *driver); +A function is also provided to unregister the driver from the VME core called +:c:func:`vme_unregister_driver` and should usually be called from the device +driver's exit routine. Resource management @@ -90,47 +56,29 @@ driver is called. The probe routine is passed a pointer to the devices device structure. This pointer should be saved, it will be required for requesting VME resources. -The driver can request ownership of one or more master windows, slave windows -and/or dma channels. Rather than allowing the device driver to request a -specific window or DMA channel (which may be used by a different driver) this -driver allows a resource to be assigned based on the required attributes of the -driver in question: - -.. code-block:: c - - struct vme_resource * vme_master_request(struct vme_dev *dev, - u32 aspace, u32 cycle, u32 width); - - struct vme_resource * vme_slave_request(struct vme_dev *dev, u32 aspace, - u32 cycle); - - struct vme_resource *vme_dma_request(struct vme_dev *dev, u32 route); - -For slave windows these attributes are split into the VME address spaces that -need to be accessed in 'aspace' and VME bus cycle types required in 'cycle'. -Master windows add a further set of attributes in 'width' specifying the -required data transfer widths. These attributes are defined as bitmasks and as -such any combination of the attributes can be requested for a single window, -the core will assign a window that meets the requirements, returning a pointer -of type vme_resource that should be used to identify the allocated resource -when it is used. For DMA controllers, the request function requires the -potential direction of any transfers to be provided in the route attributes. -This is typically VME-to-MEM and/or MEM-to-VME, though some hardware can -support VME-to-VME and MEM-to-MEM transfers as well as test pattern generation. -If an unallocated window fitting the requirements can not be found a NULL -pointer will be returned. +The driver can request ownership of one or more master windows +(:c:func:`vme_master_request`), slave windows (:c:func:`vme_slave_request`) +and/or dma channels (:c:func:`vme_dma_request`). Rather than allowing the device +driver to request a specific window or DMA channel (which may be used by a +different driver) the API allows a resource to be assigned based on the required +attributes of the driver in question. For slave windows these attributes are +split into the VME address spaces that need to be accessed in 'aspace' and VME +bus cycle types required in 'cycle'. Master windows add a further set of +attributes in 'width' specifying the required data transfer widths. These +attributes are defined as bitmasks and as such any combination of the +attributes can be requested for a single window, the core will assign a window +that meets the requirements, returning a pointer of type vme_resource that +should be used to identify the allocated resource when it is used. For DMA +controllers, the request function requires the potential direction of any +transfers to be provided in the route attributes. This is typically VME-to-MEM +and/or MEM-to-VME, though some hardware can support VME-to-VME and MEM-to-MEM +transfers as well as test pattern generation. If an unallocated window fitting +the requirements can not be found a NULL pointer will be returned. Functions are also provided to free window allocations once they are no longer -required. These functions should be passed the pointer to the resource provided -during resource allocation: - -.. code-block:: c - - void vme_master_free(struct vme_resource *res); - - void vme_slave_free(struct vme_resource *res); - - void vme_dma_free(struct vme_resource *res); +required. These functions (:c:func:`vme_master_free`, :c:func:`vme_slave_free` +and :c:func:`vme_dma_free`) should be passed the pointer to the resource +provided during resource allocation. Master windows @@ -144,61 +92,22 @@ the underlying chipset. A window must be configured before it can be used. Master window configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Once a master window has been assigned the following functions can be used to -configure it and retrieve the current settings: - -.. code-block:: c - - int vme_master_set (struct vme_resource *res, int enabled, - unsigned long long base, unsigned long long size, u32 aspace, - u32 cycle, u32 width); - - int vme_master_get (struct vme_resource *res, int *enabled, - unsigned long long *base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *width); - -The address spaces, transfer widths and cycle types are the same as described +Once a master window has been assigned :c:func:`vme_master_set` can be used to +configure it and :c:func:`vme_master_get` to retrieve the current settings. The +address spaces, transfer widths and cycle types are the same as described under resource management, however some of the options are mutually exclusive. For example, only one address space may be specified. -These functions return 0 on success or an error code should the call fail. - Master window access ~~~~~~~~~~~~~~~~~~~~ -The following functions can be used to read from and write to configured master -windows. These functions return the number of bytes copied: - -.. code-block:: c - - ssize_t vme_master_read(struct vme_resource *res, void *buf, - size_t count, loff_t offset); - - ssize_t vme_master_write(struct vme_resource *res, void *buf, - size_t count, loff_t offset); - -In addition to simple reads and writes, a function is provided to do a -read-modify-write transaction. This function returns the original value of the -VME bus location : - -.. code-block:: c - - unsigned int vme_master_rmw (struct vme_resource *res, - unsigned int mask, unsigned int compare, unsigned int swap, - loff_t offset); - -This functions by reading the offset, applying the mask. If the bits selected in -the mask match with the values of the corresponding bits in the compare field, -the value of swap is written the specified offset. - -Parts of a VME window can be mapped into user space memory using the following -function: +The function :c:func:`vme_master_read` can be used to read from and +:c:func:`vme_master_write` used to write to configured master windows. -.. code-block:: c - - int vme_master_mmap(struct vme_resource *resource, - struct vm_area_struct *vma) +In addition to simple reads and writes, :c:func:`vme_master_rmw` is provided to +do a read-modify-write transaction. Parts of a VME window can also be mapped +into user space memory using :c:func:`vme_master_mmap`. Slave windows @@ -213,41 +122,23 @@ it can be used. Slave window configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~ -Once a slave window has been assigned the following functions can be used to -configure it and retrieve the current settings: - -.. code-block:: c - - int vme_slave_set (struct vme_resource *res, int enabled, - unsigned long long base, unsigned long long size, - dma_addr_t mem, u32 aspace, u32 cycle); - - int vme_slave_get (struct vme_resource *res, int *enabled, - unsigned long long *base, unsigned long long *size, - dma_addr_t *mem, u32 *aspace, u32 *cycle); +Once a slave window has been assigned :c:func:`vme_slave_set` can be used to +configure it and :c:func:`vme_slave_get` to retrieve the current settings. The address spaces, transfer widths and cycle types are the same as described under resource management, however some of the options are mutually exclusive. For example, only one address space may be specified. -These functions return 0 on success or an error code should the call fail. - Slave window buffer allocation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Functions are provided to allow the user to allocate and free a contiguous -buffers which will be accessible by the VME bridge. These functions do not have -to be used, other methods can be used to allocate a buffer, though care must be -taken to ensure that they are contiguous and accessible by the VME bridge: - -.. code-block:: c - - void * vme_alloc_consistent(struct vme_resource *res, size_t size, - dma_addr_t *mem); - - void vme_free_consistent(struct vme_resource *res, size_t size, - void *virt, dma_addr_t mem); +Functions are provided to allow the user to allocate +(:c:func:`vme_alloc_consistent`) and free (:c:func:`vme_free_consistent`) +contiguous buffers which will be accessible by the VME bridge. These functions +do not have to be used, other methods can be used to allocate a buffer, though +care must be taken to ensure that they are contiguous and accessible by the VME +bridge. Slave window access @@ -269,29 +160,18 @@ executed, reused and destroyed. List Management ~~~~~~~~~~~~~~~ -The following functions are provided to create and destroy DMA lists. Execution -of a list will not automatically destroy the list, thus enabling a list to be -reused for repetitive tasks: - -.. code-block:: c - - struct vme_dma_list *vme_new_dma_list(struct vme_resource *res); - - int vme_dma_list_free(struct vme_dma_list *list); +The function :c:func:`vme_new_dma_list` is provided to create and +:c:func:`vme_dma_list_free` to destroy DMA lists. Execution of a list will not +automatically destroy the list, thus enabling a list to be reused for repetitive +tasks. List Population ~~~~~~~~~~~~~~~ -An item can be added to a list using the following function ( the source and +An item can be added to a list using :c:func:`vme_dma_list_add` (the source and destination attributes need to be created before calling this function, this is -covered under "Transfer Attributes"): - -.. code-block:: c - - int vme_dma_list_add(struct vme_dma_list *list, - struct vme_dma_attr *src, struct vme_dma_attr *dest, - size_t count); +covered under "Transfer Attributes"). .. note:: @@ -310,41 +190,19 @@ an item to a list. This is due to the diverse attributes required for each type of source and destination. There are functions to create attributes for PCI, VME and pattern sources and destinations (where appropriate): -Pattern source: - -.. code-block:: c - - struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type); - -PCI source or destination: - -.. code-block:: c - - struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t mem); - -VME source or destination: + - PCI source or destination: :c:func:`vme_dma_pci_attribute` + - VME source or destination: :c:func:`vme_dma_vme_attribute` + - Pattern source: :c:func:`vme_dma_pattern_attribute` -.. code-block:: c - - struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long base, - u32 aspace, u32 cycle, u32 width); - -The following function should be used to free an attribute: - -.. code-block:: c - - void vme_dma_free_attribute(struct vme_dma_attr *attr); +The function :c:func:`vme_dma_free_attribute` should be used to free an +attribute. List Execution ~~~~~~~~~~~~~~ -The following function queues a list for execution. The function will return -once the list has been executed: - -.. code-block:: c - - int vme_dma_list_exec(struct vme_dma_list *list); +The function :c:func:`vme_dma_list_exec` queues a list for execution and will +return once the list has been executed. Interrupts @@ -358,20 +216,13 @@ specific VME level and status IDs. Attaching Interrupt Handlers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The following functions can be used to attach and free a specific VME level and -status ID combination. Any given combination can only be assigned a single -callback function. A void pointer parameter is provided, the value of which is -passed to the callback function, the use of this pointer is user undefined: - -.. code-block:: c - - int vme_irq_request(struct vme_dev *dev, int level, int statid, - void (*callback)(int, int, void *), void *priv); - - void vme_irq_free(struct vme_dev *dev, int level, int statid); - -The callback parameters are as follows. Care must be taken in writing a callback -function, callback functions run in interrupt context: +The function :c:func:`vme_irq_request` can be used to attach and +:c:func:`vme_irq_free` to free a specific VME level and status ID combination. +Any given combination can only be assigned a single callback function. A void +pointer parameter is provided, the value of which is passed to the callback +function, the use of this pointer is user undefined. The callback parameters are +as follows. Care must be taken in writing a callback function, callback +functions run in interrupt context: .. code-block:: c @@ -381,12 +232,8 @@ function, callback functions run in interrupt context: Interrupt Generation ~~~~~~~~~~~~~~~~~~~~ -The following function can be used to generate a VME interrupt at a given VME -level and VME status ID: - -.. code-block:: c - - int vme_irq_generate(struct vme_dev *dev, int level, int statid); +The function :c:func:`vme_irq_generate` can be used to generate a VME interrupt +at a given VME level and VME status ID. Location monitors @@ -399,54 +246,29 @@ monitor. Location Monitor Management ~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The following functions are provided to request the use of a block of location -monitors and to free them after they are no longer required: - -.. code-block:: c - - struct vme_resource * vme_lm_request(struct vme_dev *dev); - - void vme_lm_free(struct vme_resource * res); - -Each block may provide a number of location monitors, monitoring adjacent -locations. The following function can be used to determine how many locations -are provided: - -.. code-block:: c - - int vme_lm_count(struct vme_resource * res); +The function :c:func:`vme_lm_request` is provided to request the use of a block +of location monitors and :c:func:`vme_lm_free` to free them after they are no +longer required. Each block may provide a number of location monitors, +monitoring adjacent locations. The function :c:func:`vme_lm_count` can be used +to determine how many locations are provided. Location Monitor Configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Once a bank of location monitors has been allocated, the following functions -are provided to configure the location and mode of the location monitor: - -.. code-block:: c - - int vme_lm_set(struct vme_resource *res, unsigned long long base, - u32 aspace, u32 cycle); - - int vme_lm_get(struct vme_resource *res, unsigned long long *base, - u32 *aspace, u32 *cycle); +Once a bank of location monitors has been allocated, the function +:c:func:`vme_lm_set` is provided to configure the location and mode of the +location monitor. The function :c:func:`vme_lm_get` can be used to retrieve +existing settings. Location Monitor Use ~~~~~~~~~~~~~~~~~~~~ -The following functions allow a callback to be attached and detached from each -location monitor location. Each location monitor can monitor a number of -adjacent locations: - -.. code-block:: c - - int vme_lm_attach(struct vme_resource *res, int num, - void (*callback)(void *)); - - int vme_lm_detach(struct vme_resource *res, int num); - -The callback function is declared as follows. +The function :c:func:`vme_lm_attach` enables a callback to be attached and +:c:func:`vme_lm_detach` allows on to be detached from each location monitor +location. Each location monitor can monitor a number of adjacent locations. The +callback function is declared as follows. .. code-block:: c @@ -456,19 +278,20 @@ The callback function is declared as follows. Slot Detection -------------- -This function returns the slot ID of the provided bridge. - -.. code-block:: c - - int vme_slot_num(struct vme_dev *dev); +The function :c:func:`vme_slot_num` returns the slot ID of the provided bridge. Bus Detection ------------- -This function returns the bus ID of the provided bridge. +The function :c:func:`vme_bus_num` returns the bus ID of the provided bridge. -.. code-block:: c - int vme_bus_num(struct vme_dev *dev); +VME API +------- + +.. kernel-doc:: include/linux/vme.h + :internal: +.. kernel-doc:: drivers/vme/vme.c + :export: diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class deleted file mode 100644 index 49c81caef84d..000000000000 --- a/Documentation/extcon/porting-android-switch-class +++ /dev/null @@ -1,123 +0,0 @@ - - Staging/Android Switch Class Porting Guide - (linux/drivers/staging/android/switch) - (c) Copyright 2012 Samsung Electronics - -AUTHORS -MyungJoo Ham <myungjoo.ham@samsung.com> - -/***************************************************************** - * CHAPTER 1. * - * PORTING SWITCH CLASS DEVICE DRIVERS * - *****************************************************************/ - -****** STEP 1. Basic Functionality - No extcon extended feature, but switch features only. - -- struct switch_dev (fed to switch_dev_register/unregister) - @name: no change - @dev: no change - @index: drop (not used in switch device driver side anyway) - @state: no change - If you have used @state with magic numbers, keep it - at this step. - @print_name: no change but type change (switch_dev->extcon_dev) - @print_state: no change but type change (switch_dev->extcon_dev) - -- switch_dev_register(sdev, dev) - => extcon_dev_register(edev) - : type change (sdev->edev) - : remove second param('dev'). if edev has parent device, should store - 'dev' to 'edev.dev.parent' before registering extcon device -- switch_dev_unregister(sdev) - => extcon_dev_unregister(edev) - : no change but type change (sdev->edev) -- switch_get_state(sdev) - => extcon_get_state(edev) - : no change but type change (sdev->edev) and (return: int->u32) -- switch_set_state(sdev, state) - => extcon_set_state(edev, state) - : no change but type change (sdev->edev) and (state: int->u32) - -With this changes, the ex-switch extcon class device works as it once -worked as switch class device. However, it will now have additional -interfaces (both ABI and in-kernel API) and different ABI locations. -However, if CONFIG_ANDROID is enabled without CONFIG_ANDROID_SWITCH, -/sys/class/switch/* will be symbolically linked to /sys/class/extcon/ -so that they are still compatible with legacy userspace processes. - -****** STEP 2. Multistate (no more magic numbers in state value) - Extcon's extended features for switch device drivers with - complex features usually required magic numbers in state - value of switch_dev. With extcon, such magic numbers that - support multiple cables are no more required or supported. - - 1. Define cable names at edev->supported_cable. - 2. (Recommended) remove print_state callback. - 3. Use extcon_get_cable_state_(edev, index) or - extcon_get_cable_state(edev, cable_name) instead of - extcon_get_state(edev) if you intend to get a state of a specific - cable. Same for set_state. This way, you can remove the usage of - magic numbers in state value. - 4. Use extcon_update_state() if you are updating specific bits of - the state value. - -Example: a switch device driver w/ magic numbers for two cables. - "0x00": no cables connected. - "0x01": cable 1 connected - "0x02": cable 2 connected - "0x03": cable 1 and 2 connected - 1. edev->supported_cable = {"1", "2", NULL}; - 2. edev->print_state = NULL; - 3. extcon_get_cable_state_(edev, 0) shows cable 1's state. - extcon_get_cable_state(edev, "1") shows cable 1's state. - extcon_set_cable_state_(edev, 1) sets cable 2's state. - extcon_set_cable_state(edev, "2") sets cable 2's state - 4. extcon_update_state(edev, 0x01, 0) sets the least bit's 0. - -****** STEP 3. Notify other device drivers - - You can notify others of the cable attach/detach events with -notifier chains. - - At the side of other device drivers (the extcon device itself -does not need to get notified of its own events), there are two -methods to register notifier_block for cable events: -(a) for a specific cable or (b) for every cable. - - (a) extcon_register_interest(obj, extcon_name, cable_name, nb) - Example: want to get news of "MAX8997_MUIC"'s "USB" cable - - obj = kzalloc(sizeof(struct extcon_specific_cable_nb), - GFP_KERNEL); - nb->notifier_call = the_callback_to_handle_usb; - - extcon_register_intereset(obj, "MAX8997_MUIC", "USB", nb); - - (b) extcon_register_notifier(edev, nb) - Call nb for any changes in edev. - - Please note that in order to properly behave with method (a), -the extcon device driver should support multistate feature (STEP 2). - -****** STEP 4. Inter-cable relation (mutually exclusive) - - You can provide inter-cable mutually exclusiveness information -for an extcon device. When cables A and B are declared to be mutually -exclusive, the two cables cannot be in ATTACHED state simulteneously. - - -/***************************************************************** - * CHAPTER 2. * - * PORTING USERSPACE w/ SWITCH CLASS DEVICE SUPPORT * - *****************************************************************/ - -****** ABI Location - - If "CONFIG_ANDROID" is enabled, /sys/class/switch/* are created -as symbolic links to /sys/class/extcon/*. - - The two files of switch class, name and state, are provided with -extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is -not enabled or print_state callback is supplied, the output of -state ABI is same with switch class. diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX index 6e18c70c3474..8d76718e1ea2 100644 --- a/Documentation/w1/slaves/00-INDEX +++ b/Documentation/w1/slaves/00-INDEX @@ -2,7 +2,11 @@ - This file w1_therm - The Maxim/Dallas Semiconductor ds18*20 temperature sensor. +w1_ds2413 + - The Maxim/Dallas Semiconductor ds2413 dual channel addressable switch. w1_ds2423 - The Maxim/Dallas Semiconductor ds2423 counter device. +w1_ds2438 + - The Maxim/Dallas Semiconductor ds2438 smart battery monitor. w1_ds28e04 - The Maxim/Dallas Semiconductor ds28e04 eeprom. diff --git a/Documentation/w1/slaves/w1_ds2413 b/Documentation/w1/slaves/w1_ds2413 new file mode 100644 index 000000000000..936263a8ccb4 --- /dev/null +++ b/Documentation/w1/slaves/w1_ds2413 @@ -0,0 +1,50 @@ +Kernel driver w1_ds2413 +======================= + +Supported chips: + * Maxim DS2413 1-Wire Dual Channel Addressable Switch + +supported family codes: + W1_FAMILY_DS2413 0x3A + +Author: Mariusz Bialonczyk <manio@skyboo.net> + +Description +----------- + +The DS2413 chip has two open-drain outputs (PIO A and PIO B). +Support is provided through the sysfs files "output" and "state". + +Reading state +------------- +The "state" file provides one-byte value which is in the same format as for +the chip PIO_ACCESS_READ command (refer the datasheet for details): + +Bit 0: PIOA Pin State +Bit 1: PIOA Output Latch State +Bit 2: PIOB Pin State +Bit 3: PIOB Output Latch State +Bit 4-7: Complement of Bit 3 to Bit 0 (verified by the kernel module) + +This file is readonly. + +Writing output +-------------- +You can set the PIO pins using the "output" file. +It is writable, you can write one-byte value to this sysfs file. +Similarly the byte format is the same as for the PIO_ACCESS_WRITE command: + +Bit 0: PIOA +Bit 1: PIOB +Bit 2-7: No matter (driver will set it to "1"s) + + +The chip has some kind of basic protection against transmission errors. +When reading the state, there is a four complement bits. +The driver is checking this complement, and when it is wrong then it is +returning I/O error. + +When writing output, the master must repeat the PIO Output Data byte in +its inverted form and it is waiting for a confirmation. +If the write is unsuccessful for three times, the write also returns +I/O error. diff --git a/Documentation/w1/slaves/w1_ds2438 b/Documentation/w1/slaves/w1_ds2438 new file mode 100644 index 000000000000..b99f3674c5b4 --- /dev/null +++ b/Documentation/w1/slaves/w1_ds2438 @@ -0,0 +1,63 @@ +Kernel driver w1_ds2438 +======================= + +Supported chips: + * Maxim DS2438 Smart Battery Monitor + +supported family codes: + W1_FAMILY_DS2438 0x26 + +Author: Mariusz Bialonczyk <manio@skyboo.net> + +Description +----------- + +The DS2438 chip provides several functions that are desirable to carry in +a battery pack. It also has a 40 bytes of nonvolatile EEPROM. +Because the ability of temperature, current and voltage measurement, the chip +is also often used in weather stations and applications such as: rain gauge, +wind speed/direction measuring, humidity sensing, etc. + +Current support is provided through the following sysfs files (all files +except "iad" are readonly): + +"iad" +----- +This file controls the 'Current A/D Control Bit' (IAD) in the +Status/Configuration Register. +Writing a zero value will clear the IAD bit and disables the current +measurements. +Writing value "1" is setting the IAD bit (enables the measurements). +The IAD bit is enabled by default in the DS2438. + +When writing to sysfs file bits 2-7 are ignored, so it's safe to write ASCII. +An I/O error is returned when there is a problem setting the new value. + +"page0" +------- +This file provides full 8 bytes of the chip Page 0 (00h). +This page contains the most frequently accessed information of the DS2438. +Internally when this file is read, the additional CRC byte is also obtained +from the slave device. If it is correct, the 8 bytes page data are passed +to userspace, otherwise an I/O error is returned. + +"temperature" +------------- +Opening and reading this file initiates the CONVERT_T (temperature conversion) +command of the chip, afterwards the temperature is read from the device +registers and provided as an ASCII decimal value. + +Important: The returned value has to be divided by 256 to get a real +temperature in degrees Celsius. + +"vad", "vdd" +------------ +Opening and reading this file initiates the CONVERT_V (voltage conversion) +command of the chip. + +Depending on a sysfs filename a different input for the A/D will be selected: +vad: general purpose A/D input (VAD) +vdd: battery input (VDD) + +After the voltage conversion the value is returned as decimal ASCII. +Note: The value is in mV, so to get a volts the value has to be divided by 10. diff --git a/MAINTAINERS b/MAINTAINERS index 748354f51966..5ee3125f8341 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5161,7 +5161,6 @@ F: include/uapi/linux/firewire*.h F: tools/firewire/ FIRMWARE LOADER (request_firmware) -M: Ming Lei <ming.lei@canonical.com> M: Luis R. Rodriguez <mcgrof@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained @@ -5191,13 +5190,15 @@ F: include/linux/ipmi-fru.h K: fmc_d.*register FPGA MANAGER FRAMEWORK -M: Alan Tull <atull@opensource.altera.com> +M: Alan Tull <atull@kernel.org> R: Moritz Fischer <moritz.fischer@ettus.com> L: linux-fpga@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git +F: Documentation/fpga/ +F: Documentation/devicetree/bindings/fpga/ F: drivers/fpga/ -F: include/linux/fpga/fpga-mgr.h +F: include/linux/fpga/ W: http://www.rocketboards.org FPU EMULATOR @@ -9131,7 +9132,6 @@ F: drivers/nvme/target/fcloop.c NVMEM FRAMEWORK M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -M: Maxime Ripard <maxime.ripard@free-electrons.com> S: Maintained F: drivers/nvmem/ F: Documentation/devicetree/bindings/nvmem/ diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 8a5b6f059498..55b186ef863a 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -210,6 +210,28 @@ static struct ep93xx_eth_data __initdata ts72xx_eth_data = { .phy_id = 1, }; +#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) + +/* Relative to EP93XX_CS1_PHYS_BASE */ +#define TS73XX_FPGA_LOADER_BASE 0x03c00000 + +static struct resource ts73xx_fpga_resources[] = { + { + .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE, + .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ts73xx_fpga_device = { + .name = "ts73xx-fpga-mgr", + .id = -1, + .resource = ts73xx_fpga_resources, + .num_resources = ARRAY_SIZE(ts73xx_fpga_resources), +}; + +#endif + static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); @@ -218,6 +240,10 @@ static void __init ts72xx_init_machine(void) platform_device_register(&ts72xx_wdt_device); ep93xx_register_eth(&ts72xx_eth_data, 1); +#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) + if (board_is_ts7300()) + platform_device_register(&ts73xx_fpga_device); +#endif } MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index 2b01421f7d0f..5b882cc0c0e9 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -25,7 +25,7 @@ #include <linux/vmalloc.h> #include <linux/mm.h> #include <linux/clockchips.h> - +#include <linux/hyperv.h> #ifdef CONFIG_HYPERV_TSCPAGE diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h index 3a20ccf787b8..432df4b1baec 100644 --- a/arch/x86/include/uapi/asm/hyperv.h +++ b/arch/x86/include/uapi/asm/hyperv.h @@ -124,7 +124,7 @@ * Recommend using hypercall for address space switches rather * than MOV to CR3 instruction */ -#define HV_X64_MWAIT_RECOMMENDED (1 << 0) +#define HV_X64_AS_SWITCH_RECOMMENDED (1 << 0) /* Recommend using hypercall for local TLB flushes rather * than INVLPG or MOV to CR3 instructions */ #define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED (1 << 1) @@ -148,6 +148,11 @@ #define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5) /* + * Virtual APIC support + */ +#define HV_X64_DEPRECATING_AEOI_RECOMMENDED (1 << 9) + +/* * Crash notification flag. */ #define HV_CRASH_CTL_CRASH_NOTIFY (1ULL << 63) diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index b5375b9497b3..04cb8d34ccb8 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -49,6 +49,9 @@ void hyperv_vector_handler(struct pt_regs *regs) if (vmbus_handler) vmbus_handler(); + if (ms_hyperv.hints & HV_X64_DEPRECATING_AEOI_RECOMMENDED) + ack_APIC_irq(); + exiting_irq(); set_irq_regs(old_regs); } diff --git a/drivers/android/Kconfig b/drivers/android/Kconfig index a82fc022d34b..832e885349b1 100644 --- a/drivers/android/Kconfig +++ b/drivers/android/Kconfig @@ -22,7 +22,7 @@ config ANDROID_BINDER_IPC config ANDROID_BINDER_DEVICES string "Android Binder devices" depends on ANDROID_BINDER_IPC - default "binder" + default "binder,hwbinder" ---help--- Default value for the binder.devices parameter. diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 8a8e403644d6..9ae6681c90ad 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -13,8 +13,22 @@ menuconfig AUXDISPLAY If you say N, all options in this submenu will be skipped and disabled. +config CHARLCD + tristate "Character LCD core support" if COMPILE_TEST + if AUXDISPLAY +config HD44780 + tristate "HD44780 Character LCD support" + depends on GPIOLIB || COMPILE_TEST + select CHARLCD + ---help--- + Enable support for Character LCDs using a HD44780 controller. + The LCD is accessible through the /dev/lcd char device (10, 156). + This code can either be compiled as a module, or linked into the + kernel and started at boot. + If you don't understand what all this is about, say N. + config KS0108 tristate "KS0108 LCD Controller" depends on PARPORT_PC @@ -142,3 +156,293 @@ config HT16K33 LED controller driver with keyscan. endif # AUXDISPLAY + +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + +config PANEL + tristate "Parallel port LCD/Keypad Panel support" + depends on PARPORT + select CHARLCD + ---help--- + Say Y here if you have an HD44780 or KS-0074 LCD connected to your + parallel port. This driver also features 4 and 6-key keypads. The LCD + is accessible through the /dev/lcd char device (10, 156), and the + keypad through /dev/keypad (10, 185). This code can either be + compiled as a module, or linked into the kernel and started at boot. + If you don't understand what all this is about, say N. + +if PANEL + +config PANEL_PARPORT + int "Default parallel port number (0=LPT1)" + range 0 255 + default "0" + ---help--- + This is the index of the parallel port the panel is connected to. One + driver instance only supports one parallel port, so if your keypad + and LCD are connected to two separate ports, you have to start two + modules with different arguments. Numbering starts with '0' for LPT1, + and so on. + +config PANEL_PROFILE + int "Default panel profile (0-5, 0=custom)" + range 0 5 + default "5" + ---help--- + To ease configuration, the driver supports different configuration + profiles for past and recent wirings. These profiles can also be + used to define an approximative configuration, completed by a few + other options. Here are the profiles : + + 0 = custom (see further) + 1 = 2x16 parallel LCD, old keypad + 2 = 2x16 serial LCD (KS-0074), new keypad + 3 = 2x16 parallel LCD (Hantronix), no keypad + 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad + 5 = 2x40 parallel LCD (old one), with old keypad + + Custom configurations allow you to define how your display is + wired to the parallel port, and how it works. This is only intended + for experts. + +config PANEL_KEYPAD + depends on PANEL_PROFILE="0" + int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" + range 0 3 + default 0 + ---help--- + This enables and configures a keypad connected to the parallel port. + The keys will be read from character device 10,185. Valid values are : + + 0 : do not enable this driver + 1 : old 6 keys keypad + 2 : new 6 keys keypad, as used on the server at www.ant-computing.com + 3 : Nexcom NSA1045's 4 keys keypad + + New profiles can be described in the driver source. The driver also + supports simultaneous keys pressed when the keypad supports them. + +config PANEL_LCD + depends on PANEL_PROFILE="0" + int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" + range 0 5 + default 0 + ---help--- + This enables and configures an LCD connected to the parallel port. + The driver includes an interpreter for escape codes starting with + '\e[L' which are specific to the LCD, and a few ANSI codes. The + driver will be registered as character device 10,156, usually + under the name '/dev/lcd'. There are a total of 6 supported types : + + 0 : do not enable the driver + 1 : custom configuration and wiring (see further) + 2 : 2x16 & 2x40 parallel LCD (old wiring) + 3 : 2x16 serial LCD (KS-0074 based) + 4 : 2x16 parallel LCD (Hantronix wiring) + 5 : 2x16 parallel LCD (Nexcom wiring) + + When type '1' is specified, other options will appear to configure + more precise aspects (wiring, dimensions, protocol, ...). Please note + that those values changed from the 2.4 driver for better consistency. + +config PANEL_LCD_HEIGHT + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "Number of lines on the LCD (1-2)" + range 1 2 + default 2 + ---help--- + This is the number of visible character lines on the LCD in custom profile. + It can either be 1 or 2. + +config PANEL_LCD_WIDTH + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "Number of characters per line on the LCD (1-40)" + range 1 40 + default 40 + ---help--- + This is the number of characters per line on the LCD in custom profile. + Common values are 16,20,24,40. + +config PANEL_LCD_BWIDTH + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "Internal LCD line width (1-40, 40 by default)" + range 1 40 + default 40 + ---help--- + Most LCDs use a standard controller which supports hardware lines of 40 + characters, although sometimes only 16, 20 or 24 of them are really wired + to the terminal. This results in some non-visible but addressable characters, + and is the case for most parallel LCDs. Other LCDs, and some serial ones, + however, use the same line width internally as what is visible. The KS0074 + for example, uses 16 characters per line for 16 visible characters per line. + + This option lets you configure the value used by your LCD in 'custom' profile. + If you don't know, put '40' here. + +config PANEL_LCD_HWIDTH + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "Hardware LCD line width (1-64, 64 by default)" + range 1 64 + default 64 + ---help--- + Most LCDs use a single address bit to differentiate line 0 and line 1. Since + some of them need to be able to address 40 chars with the lower bits, they + often use the immediately superior power of 2, which is 64, to address the + next line. + + If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and + 64 here for a 2x40. + +config PANEL_LCD_CHARSET + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "LCD character set (0=normal, 1=KS0074)" + range 0 1 + default 0 + ---help--- + Some controllers such as the KS0074 use a somewhat strange character set + where many symbols are at unusual places. The driver knows how to map + 'standard' ASCII characters to the character sets used by these controllers. + Valid values are : + + 0 : normal (untranslated) character set + 1 : KS0074 character set + + If you don't know, use the normal one (0). + +config PANEL_LCD_PROTO + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "LCD communication mode (0=parallel 8 bits, 1=serial)" + range 0 1 + default 0 + ---help--- + This driver now supports any serial or parallel LCD wired to a parallel + port. But before assigning signals, the driver needs to know if it will + be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires + (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals + (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits + parallel LCD, and 1 for a serial LCD. + +config PANEL_LCD_PIN_E + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " + range -17 17 + default 14 + ---help--- + This describes the number of the parallel port pin to which the LCD 'E' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'E' pin in custom profile is '14' (AUTOFEED). + +config PANEL_LCD_PIN_RS + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " + range -17 17 + default 17 + ---help--- + This describes the number of the parallel port pin to which the LCD 'RS' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'RS' pin in custom profile is '17' (SELECT IN). + +config PANEL_LCD_PIN_RW + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " + range -17 17 + default 16 + ---help--- + This describes the number of the parallel port pin to which the LCD 'RW' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'RW' pin in custom profile is '16' (INIT). + +config PANEL_LCD_PIN_SCL + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " + range -17 17 + default 1 + ---help--- + This describes the number of the parallel port pin to which the serial + LCD 'SCL' signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'SCL' pin in custom profile is '1' (STROBE). + +config PANEL_LCD_PIN_SDA + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " + range -17 17 + default 2 + ---help--- + This describes the number of the parallel port pin to which the serial + LCD 'SDA' signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'SDA' pin in custom profile is '2' (D0). + +config PANEL_LCD_PIN_BL + depends on PANEL_PROFILE="0" && PANEL_LCD="1" + int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " + range -17 17 + default 0 + ---help--- + This describes the number of the parallel port pin to which the LCD 'BL' signal + has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'BL' pin in custom profile is '0' (uncontrolled). + +config PANEL_CHANGE_MESSAGE + bool "Change LCD initialization message ?" + default "n" + ---help--- + This allows you to replace the boot message indicating the kernel version + and the driver version with a custom message. This is useful on appliances + where a simple 'Starting system' message can be enough to stop a customer + from worrying. + + If you say 'Y' here, you'll be able to choose a message yourself. Otherwise, + say 'N' and keep the default message with the version. + +config PANEL_BOOT_MESSAGE + depends on PANEL_CHANGE_MESSAGE="y" + string "New initialization message" + default "" + ---help--- + This allows you to replace the boot message indicating the kernel version + and the driver version with a custom message. This is useful on appliances + where a simple 'Starting system' message can be enough to stop a customer + from worrying. + + An empty message will only clear the display at driver init time. Any other + printf()-formatted message is valid with newline and escape codes. + +endif # PANEL diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile index cb3dd847713b..2b8af3dc5e42 100644 --- a/drivers/auxdisplay/Makefile +++ b/drivers/auxdisplay/Makefile @@ -2,7 +2,11 @@ # Makefile for the kernel auxiliary displays device drivers. # +obj-$(CONFIG_CHARLCD) += charlcd.o +obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o obj-$(CONFIG_KS0108) += ks0108.o obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o +obj-$(CONFIG_HD44780) += hd44780.o obj-$(CONFIG_HT16K33) += ht16k33.o +obj-$(CONFIG_PANEL) += panel.o diff --git a/drivers/misc/arm-charlcd.c b/drivers/auxdisplay/arm-charlcd.c index b3176ee92b90..b3176ee92b90 100644 --- a/drivers/misc/arm-charlcd.c +++ b/drivers/auxdisplay/arm-charlcd.c diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c new file mode 100644 index 000000000000..cfeb049a01ef --- /dev/null +++ b/drivers/auxdisplay/charlcd.c @@ -0,0 +1,818 @@ +/* + * Character LCD driver for Linux + * + * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> + * Copyright (C) 2016-2017 Glider bvba + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/atomic.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/workqueue.h> + +#include <generated/utsrelease.h> + +#include <misc/charlcd.h> + +#define LCD_MINOR 156 + +#define DEFAULT_LCD_BWIDTH 40 +#define DEFAULT_LCD_HWIDTH 64 + +/* Keep the backlight on this many seconds for each flash */ +#define LCD_BL_TEMPO_PERIOD 4 + +#define LCD_FLAG_B 0x0004 /* Blink on */ +#define LCD_FLAG_C 0x0008 /* Cursor on */ +#define LCD_FLAG_D 0x0010 /* Display on */ +#define LCD_FLAG_F 0x0020 /* Large font mode */ +#define LCD_FLAG_N 0x0040 /* 2-rows mode */ +#define LCD_FLAG_L 0x0080 /* Backlight enabled */ + +/* LCD commands */ +#define LCD_CMD_DISPLAY_CLEAR 0x01 /* Clear entire display */ + +#define LCD_CMD_ENTRY_MODE 0x04 /* Set entry mode */ +#define LCD_CMD_CURSOR_INC 0x02 /* Increment cursor */ + +#define LCD_CMD_DISPLAY_CTRL 0x08 /* Display control */ +#define LCD_CMD_DISPLAY_ON 0x04 /* Set display on */ +#define LCD_CMD_CURSOR_ON 0x02 /* Set cursor on */ +#define LCD_CMD_BLINK_ON 0x01 /* Set blink on */ + +#define LCD_CMD_SHIFT 0x10 /* Shift cursor/display */ +#define LCD_CMD_DISPLAY_SHIFT 0x08 /* Shift display instead of cursor */ +#define LCD_CMD_SHIFT_RIGHT 0x04 /* Shift display/cursor to the right */ + +#define LCD_CMD_FUNCTION_SET 0x20 /* Set function */ +#define LCD_CMD_DATA_LEN_8BITS 0x10 /* Set data length to 8 bits */ +#define LCD_CMD_TWO_LINES 0x08 /* Set to two display lines */ +#define LCD_CMD_FONT_5X10_DOTS 0x04 /* Set char font to 5x10 dots */ + +#define LCD_CMD_SET_CGRAM_ADDR 0x40 /* Set char generator RAM address */ + +#define LCD_CMD_SET_DDRAM_ADDR 0x80 /* Set display data RAM address */ + +#define LCD_ESCAPE_LEN 24 /* Max chars for LCD escape command */ +#define LCD_ESCAPE_CHAR 27 /* Use char 27 for escape command */ + +struct charlcd_priv { + struct charlcd lcd; + + struct delayed_work bl_work; + struct mutex bl_tempo_lock; /* Protects access to bl_tempo */ + bool bl_tempo; + + bool must_clear; + + /* contains the LCD config state */ + unsigned long int flags; + + /* Contains the LCD X and Y offset */ + struct { + unsigned long int x; + unsigned long int y; + } addr; + + /* Current escape sequence and it's length or -1 if outside */ + struct { + char buf[LCD_ESCAPE_LEN + 1]; + int len; + } esc_seq; + + unsigned long long drvdata[0]; +}; + +#define to_priv(p) container_of(p, struct charlcd_priv, lcd) + +/* Device single-open policy control */ +static atomic_t charlcd_available = ATOMIC_INIT(1); + +/* sleeps that many milliseconds with a reschedule */ +static void long_sleep(int ms) +{ + if (in_interrupt()) + mdelay(ms); + else + schedule_timeout_interruptible(msecs_to_jiffies(ms)); +} + +/* turn the backlight on or off */ +static void charlcd_backlight(struct charlcd *lcd, int on) +{ + struct charlcd_priv *priv = to_priv(lcd); + + if (!lcd->ops->backlight) + return; + + mutex_lock(&priv->bl_tempo_lock); + if (!priv->bl_tempo) + lcd->ops->backlight(lcd, on); + mutex_unlock(&priv->bl_tempo_lock); +} + +static void charlcd_bl_off(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct charlcd_priv *priv = + container_of(dwork, struct charlcd_priv, bl_work); + + mutex_lock(&priv->bl_tempo_lock); + if (priv->bl_tempo) { + priv->bl_tempo = false; + if (!(priv->flags & LCD_FLAG_L)) + priv->lcd.ops->backlight(&priv->lcd, 0); + } + mutex_unlock(&priv->bl_tempo_lock); +} + +/* turn the backlight on for a little while */ +void charlcd_poke(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + + if (!lcd->ops->backlight) + return; + + cancel_delayed_work_sync(&priv->bl_work); + + mutex_lock(&priv->bl_tempo_lock); + if (!priv->bl_tempo && !(priv->flags & LCD_FLAG_L)) + lcd->ops->backlight(lcd, 1); + priv->bl_tempo = true; + schedule_delayed_work(&priv->bl_work, LCD_BL_TEMPO_PERIOD * HZ); + mutex_unlock(&priv->bl_tempo_lock); +} +EXPORT_SYMBOL_GPL(charlcd_poke); + +static void charlcd_gotoxy(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + unsigned int addr; + + /* + * we force the cursor to stay at the end of the + * line if it wants to go farther + */ + addr = priv->addr.x < lcd->bwidth ? priv->addr.x & (lcd->hwidth - 1) + : lcd->bwidth - 1; + if (priv->addr.y & 1) + addr += lcd->hwidth; + if (priv->addr.y & 2) + addr += lcd->bwidth; + lcd->ops->write_cmd(lcd, LCD_CMD_SET_DDRAM_ADDR | addr); +} + +static void charlcd_home(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + + priv->addr.x = 0; + priv->addr.y = 0; + charlcd_gotoxy(lcd); +} + +static void charlcd_print(struct charlcd *lcd, char c) +{ + struct charlcd_priv *priv = to_priv(lcd); + + if (priv->addr.x < lcd->bwidth) { + if (lcd->char_conv) + c = lcd->char_conv[(unsigned char)c]; + lcd->ops->write_data(lcd, c); + priv->addr.x++; + } + /* prevents the cursor from wrapping onto the next line */ + if (priv->addr.x == lcd->bwidth) + charlcd_gotoxy(lcd); +} + +static void charlcd_clear_fast(struct charlcd *lcd) +{ + int pos; + + charlcd_home(lcd); + + if (lcd->ops->clear_fast) + lcd->ops->clear_fast(lcd); + else + for (pos = 0; pos < min(2, lcd->height) * lcd->hwidth; pos++) + lcd->ops->write_data(lcd, ' '); + + charlcd_home(lcd); +} + +/* clears the display and resets X/Y */ +static void charlcd_clear_display(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + + lcd->ops->write_cmd(lcd, LCD_CMD_DISPLAY_CLEAR); + priv->addr.x = 0; + priv->addr.y = 0; + /* we must wait a few milliseconds (15) */ + long_sleep(15); +} + +static int charlcd_init_display(struct charlcd *lcd) +{ + void (*write_cmd_raw)(struct charlcd *lcd, int cmd); + struct charlcd_priv *priv = to_priv(lcd); + u8 init; + + if (lcd->ifwidth != 4 && lcd->ifwidth != 8) + return -EINVAL; + + priv->flags = ((lcd->height > 1) ? LCD_FLAG_N : 0) | LCD_FLAG_D | + LCD_FLAG_C | LCD_FLAG_B; + + long_sleep(20); /* wait 20 ms after power-up for the paranoid */ + + /* + * 8-bit mode, 1 line, small fonts; let's do it 3 times, to make sure + * the LCD is in 8-bit mode afterwards + */ + init = LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS; + if (lcd->ifwidth == 4) { + init >>= 4; + write_cmd_raw = lcd->ops->write_cmd_raw4; + } else { + write_cmd_raw = lcd->ops->write_cmd; + } + write_cmd_raw(lcd, init); + long_sleep(10); + write_cmd_raw(lcd, init); + long_sleep(10); + write_cmd_raw(lcd, init); + long_sleep(10); + + if (lcd->ifwidth == 4) { + /* Switch to 4-bit mode, 1 line, small fonts */ + lcd->ops->write_cmd_raw4(lcd, LCD_CMD_FUNCTION_SET >> 4); + long_sleep(10); + } + + /* set font height and lines number */ + lcd->ops->write_cmd(lcd, + LCD_CMD_FUNCTION_SET | + ((lcd->ifwidth == 8) ? LCD_CMD_DATA_LEN_8BITS : 0) | + ((priv->flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) | + ((priv->flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0)); + long_sleep(10); + + /* display off, cursor off, blink off */ + lcd->ops->write_cmd(lcd, LCD_CMD_DISPLAY_CTRL); + long_sleep(10); + + lcd->ops->write_cmd(lcd, + LCD_CMD_DISPLAY_CTRL | /* set display mode */ + ((priv->flags & LCD_FLAG_D) ? LCD_CMD_DISPLAY_ON : 0) | + ((priv->flags & LCD_FLAG_C) ? LCD_CMD_CURSOR_ON : 0) | + ((priv->flags & LCD_FLAG_B) ? LCD_CMD_BLINK_ON : 0)); + + charlcd_backlight(lcd, (priv->flags & LCD_FLAG_L) ? 1 : 0); + + long_sleep(10); + + /* entry mode set : increment, cursor shifting */ + lcd->ops->write_cmd(lcd, LCD_CMD_ENTRY_MODE | LCD_CMD_CURSOR_INC); + + charlcd_clear_display(lcd); + return 0; +} + +/* + * These are the file operation function for user access to /dev/lcd + * This function can also be called from inside the kernel, by + * setting file and ppos to NULL. + * + */ + +static inline int handle_lcd_special_code(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + + /* LCD special codes */ + + int processed = 0; + + char *esc = priv->esc_seq.buf + 2; + int oldflags = priv->flags; + + /* check for display mode flags */ + switch (*esc) { + case 'D': /* Display ON */ + priv->flags |= LCD_FLAG_D; + processed = 1; + break; + case 'd': /* Display OFF */ + priv->flags &= ~LCD_FLAG_D; + processed = 1; + break; + case 'C': /* Cursor ON */ + priv->flags |= LCD_FLAG_C; + processed = 1; + break; + case 'c': /* Cursor OFF */ + priv->flags &= ~LCD_FLAG_C; + processed = 1; + break; + case 'B': /* Blink ON */ + priv->flags |= LCD_FLAG_B; + processed = 1; + break; + case 'b': /* Blink OFF */ + priv->flags &= ~LCD_FLAG_B; + processed = 1; + break; + case '+': /* Back light ON */ + priv->flags |= LCD_FLAG_L; + processed = 1; + break; + case '-': /* Back light OFF */ + priv->flags &= ~LCD_FLAG_L; + processed = 1; + break; + case '*': /* Flash back light */ + charlcd_poke(lcd); + processed = 1; + break; + case 'f': /* Small Font */ + priv->flags &= ~LCD_FLAG_F; + processed = 1; + break; + case 'F': /* Large Font */ + priv->flags |= LCD_FLAG_F; + processed = 1; + break; + case 'n': /* One Line */ + priv->flags &= ~LCD_FLAG_N; + processed = 1; + break; + case 'N': /* Two Lines */ + priv->flags |= LCD_FLAG_N; + break; + case 'l': /* Shift Cursor Left */ + if (priv->addr.x > 0) { + /* back one char if not at end of line */ + if (priv->addr.x < lcd->bwidth) + lcd->ops->write_cmd(lcd, LCD_CMD_SHIFT); + priv->addr.x--; + } + processed = 1; + break; + case 'r': /* shift cursor right */ + if (priv->addr.x < lcd->width) { + /* allow the cursor to pass the end of the line */ + if (priv->addr.x < (lcd->bwidth - 1)) + lcd->ops->write_cmd(lcd, + LCD_CMD_SHIFT | LCD_CMD_SHIFT_RIGHT); + priv->addr.x++; + } + processed = 1; + break; + case 'L': /* shift display left */ + lcd->ops->write_cmd(lcd, LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT); + processed = 1; + break; + case 'R': /* shift display right */ + lcd->ops->write_cmd(lcd, + LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT | + LCD_CMD_SHIFT_RIGHT); + processed = 1; + break; + case 'k': { /* kill end of line */ + int x; + + for (x = priv->addr.x; x < lcd->bwidth; x++) + lcd->ops->write_data(lcd, ' '); + + /* restore cursor position */ + charlcd_gotoxy(lcd); + processed = 1; + break; + } + case 'I': /* reinitialize display */ + charlcd_init_display(lcd); + processed = 1; + break; + case 'G': { + /* Generator : LGcxxxxx...xx; must have <c> between '0' + * and '7', representing the numerical ASCII code of the + * redefined character, and <xx...xx> a sequence of 16 + * hex digits representing 8 bytes for each character. + * Most LCDs will only use 5 lower bits of the 7 first + * bytes. + */ + + unsigned char cgbytes[8]; + unsigned char cgaddr; + int cgoffset; + int shift; + char value; + int addr; + + if (!strchr(esc, ';')) + break; + + esc++; + + cgaddr = *(esc++) - '0'; + if (cgaddr > 7) { + processed = 1; + break; + } + + cgoffset = 0; + shift = 0; + value = 0; + while (*esc && cgoffset < 8) { + shift ^= 4; + if (*esc >= '0' && *esc <= '9') { + value |= (*esc - '0') << shift; + } else if (*esc >= 'A' && *esc <= 'Z') { + value |= (*esc - 'A' + 10) << shift; + } else if (*esc >= 'a' && *esc <= 'z') { + value |= (*esc - 'a' + 10) << shift; + } else { + esc++; + continue; + } + + if (shift == 0) { + cgbytes[cgoffset++] = value; + value = 0; + } + + esc++; + } + + lcd->ops->write_cmd(lcd, LCD_CMD_SET_CGRAM_ADDR | (cgaddr * 8)); + for (addr = 0; addr < cgoffset; addr++) + lcd->ops->write_data(lcd, cgbytes[addr]); + + /* ensures that we stop writing to CGRAM */ + charlcd_gotoxy(lcd); + processed = 1; + break; + } + case 'x': /* gotoxy : LxXXX[yYYY]; */ + case 'y': /* gotoxy : LyYYY[xXXX]; */ + if (!strchr(esc, ';')) + break; + + while (*esc) { + if (*esc == 'x') { + esc++; + if (kstrtoul(esc, 10, &priv->addr.x) < 0) + break; + } else if (*esc == 'y') { + esc++; + if (kstrtoul(esc, 10, &priv->addr.y) < 0) + break; + } else { + break; + } + } + + charlcd_gotoxy(lcd); + processed = 1; + break; + } + + /* TODO: This indent party here got ugly, clean it! */ + /* Check whether one flag was changed */ + if (oldflags == priv->flags) + return processed; + + /* check whether one of B,C,D flags were changed */ + if ((oldflags ^ priv->flags) & + (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D)) + /* set display mode */ + lcd->ops->write_cmd(lcd, + LCD_CMD_DISPLAY_CTRL | + ((priv->flags & LCD_FLAG_D) ? LCD_CMD_DISPLAY_ON : 0) | + ((priv->flags & LCD_FLAG_C) ? LCD_CMD_CURSOR_ON : 0) | + ((priv->flags & LCD_FLAG_B) ? LCD_CMD_BLINK_ON : 0)); + /* check whether one of F,N flags was changed */ + else if ((oldflags ^ priv->flags) & (LCD_FLAG_F | LCD_FLAG_N)) + lcd->ops->write_cmd(lcd, + LCD_CMD_FUNCTION_SET | + ((lcd->ifwidth == 8) ? LCD_CMD_DATA_LEN_8BITS : 0) | + ((priv->flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) | + ((priv->flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0)); + /* check whether L flag was changed */ + else if ((oldflags ^ priv->flags) & LCD_FLAG_L) + charlcd_backlight(lcd, !!(priv->flags & LCD_FLAG_L)); + + return processed; +} + +static void charlcd_write_char(struct charlcd *lcd, char c) +{ + struct charlcd_priv *priv = to_priv(lcd); + + /* first, we'll test if we're in escape mode */ + if ((c != '\n') && priv->esc_seq.len >= 0) { + /* yes, let's add this char to the buffer */ + priv->esc_seq.buf[priv->esc_seq.len++] = c; + priv->esc_seq.buf[priv->esc_seq.len] = 0; + } else { + /* aborts any previous escape sequence */ + priv->esc_seq.len = -1; + + switch (c) { + case LCD_ESCAPE_CHAR: + /* start of an escape sequence */ + priv->esc_seq.len = 0; + priv->esc_seq.buf[priv->esc_seq.len] = 0; + break; + case '\b': + /* go back one char and clear it */ + if (priv->addr.x > 0) { + /* + * check if we're not at the + * end of the line + */ + if (priv->addr.x < lcd->bwidth) + /* back one char */ + lcd->ops->write_cmd(lcd, LCD_CMD_SHIFT); + priv->addr.x--; + } + /* replace with a space */ + lcd->ops->write_data(lcd, ' '); + /* back one char again */ + lcd->ops->write_cmd(lcd, LCD_CMD_SHIFT); + break; + case '\014': + /* quickly clear the display */ + charlcd_clear_fast(lcd); + break; + case '\n': + /* + * flush the remainder of the current line and + * go to the beginning of the next line + */ + for (; priv->addr.x < lcd->bwidth; priv->addr.x++) + lcd->ops->write_data(lcd, ' '); + priv->addr.x = 0; + priv->addr.y = (priv->addr.y + 1) % lcd->height; + charlcd_gotoxy(lcd); + break; + case '\r': + /* go to the beginning of the same line */ + priv->addr.x = 0; + charlcd_gotoxy(lcd); + break; + case '\t': + /* print a space instead of the tab */ + charlcd_print(lcd, ' '); + break; + default: + /* simply print this char */ + charlcd_print(lcd, c); + break; + } + } + + /* + * now we'll see if we're in an escape mode and if the current + * escape sequence can be understood. + */ + if (priv->esc_seq.len >= 2) { + int processed = 0; + + if (!strcmp(priv->esc_seq.buf, "[2J")) { + /* clear the display */ + charlcd_clear_fast(lcd); + processed = 1; + } else if (!strcmp(priv->esc_seq.buf, "[H")) { + /* cursor to home */ + charlcd_home(lcd); + processed = 1; + } + /* codes starting with ^[[L */ + else if ((priv->esc_seq.len >= 3) && + (priv->esc_seq.buf[0] == '[') && + (priv->esc_seq.buf[1] == 'L')) { + processed = handle_lcd_special_code(lcd); + } + + /* LCD special escape codes */ + /* + * flush the escape sequence if it's been processed + * or if it is getting too long. + */ + if (processed || (priv->esc_seq.len >= LCD_ESCAPE_LEN)) + priv->esc_seq.len = -1; + } /* escape codes */ +} + +static struct charlcd *the_charlcd; + +static ssize_t charlcd_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + const char __user *tmp = buf; + char c; + + for (; count-- > 0; (*ppos)++, tmp++) { + if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) + /* + * let's be a little nice with other processes + * that need some CPU + */ + schedule(); + + if (get_user(c, tmp)) + return -EFAULT; + + charlcd_write_char(the_charlcd, c); + } + + return tmp - buf; +} + +static int charlcd_open(struct inode *inode, struct file *file) +{ + struct charlcd_priv *priv = to_priv(the_charlcd); + + if (!atomic_dec_and_test(&charlcd_available)) + return -EBUSY; /* open only once at a time */ + + if (file->f_mode & FMODE_READ) /* device is write-only */ + return -EPERM; + + if (priv->must_clear) { + charlcd_clear_display(&priv->lcd); + priv->must_clear = false; + } + return nonseekable_open(inode, file); +} + +static int charlcd_release(struct inode *inode, struct file *file) +{ + atomic_inc(&charlcd_available); + return 0; +} + +static const struct file_operations charlcd_fops = { + .write = charlcd_write, + .open = charlcd_open, + .release = charlcd_release, + .llseek = no_llseek, +}; + +static struct miscdevice charlcd_dev = { + .minor = LCD_MINOR, + .name = "lcd", + .fops = &charlcd_fops, +}; + +static void charlcd_puts(struct charlcd *lcd, const char *s) +{ + const char *tmp = s; + int count = strlen(s); + + for (; count-- > 0; tmp++) { + if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) + /* + * let's be a little nice with other processes + * that need some CPU + */ + schedule(); + + charlcd_write_char(lcd, *tmp); + } +} + +/* initialize the LCD driver */ +static int charlcd_init(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + int ret; + + if (lcd->ops->backlight) { + mutex_init(&priv->bl_tempo_lock); + INIT_DELAYED_WORK(&priv->bl_work, charlcd_bl_off); + } + + /* + * before this line, we must NOT send anything to the display. + * Since charlcd_init_display() needs to write data, we have to + * enable mark the LCD initialized just before. + */ + ret = charlcd_init_display(lcd); + if (ret) + return ret; + + /* display a short message */ +#ifdef CONFIG_PANEL_CHANGE_MESSAGE +#ifdef CONFIG_PANEL_BOOT_MESSAGE + charlcd_puts(lcd, "\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE); +#endif +#else + charlcd_puts(lcd, "\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE "\n"); +#endif + /* clear the display on the next device opening */ + priv->must_clear = true; + charlcd_home(lcd); + return 0; +} + +struct charlcd *charlcd_alloc(unsigned int drvdata_size) +{ + struct charlcd_priv *priv; + struct charlcd *lcd; + + priv = kzalloc(sizeof(*priv) + drvdata_size, GFP_KERNEL); + if (!priv) + return NULL; + + priv->esc_seq.len = -1; + + lcd = &priv->lcd; + lcd->ifwidth = 8; + lcd->bwidth = DEFAULT_LCD_BWIDTH; + lcd->hwidth = DEFAULT_LCD_HWIDTH; + lcd->drvdata = priv->drvdata; + + return lcd; +} +EXPORT_SYMBOL_GPL(charlcd_alloc); + +static int panel_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + struct charlcd *lcd = the_charlcd; + + switch (code) { + case SYS_DOWN: + charlcd_puts(lcd, + "\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+"); + break; + case SYS_HALT: + charlcd_puts(lcd, "\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+"); + break; + case SYS_POWER_OFF: + charlcd_puts(lcd, "\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+"); + break; + default: + break; + } + return NOTIFY_DONE; +} + +static struct notifier_block panel_notifier = { + panel_notify_sys, + NULL, + 0 +}; + +int charlcd_register(struct charlcd *lcd) +{ + int ret; + + ret = charlcd_init(lcd); + if (ret) + return ret; + + ret = misc_register(&charlcd_dev); + if (ret) + return ret; + + the_charlcd = lcd; + register_reboot_notifier(&panel_notifier); + return 0; +} +EXPORT_SYMBOL_GPL(charlcd_register); + +int charlcd_unregister(struct charlcd *lcd) +{ + struct charlcd_priv *priv = to_priv(lcd); + + unregister_reboot_notifier(&panel_notifier); + charlcd_puts(lcd, "\x0cLCD driver unloaded.\x1b[Lc\x1b[Lb\x1b[L-"); + misc_deregister(&charlcd_dev); + the_charlcd = NULL; + if (lcd->ops->backlight) { + cancel_delayed_work_sync(&priv->bl_work); + priv->lcd.ops->backlight(&priv->lcd, 0); + } + + return 0; +} +EXPORT_SYMBOL_GPL(charlcd_unregister); + +MODULE_LICENSE("GPL"); diff --git a/drivers/auxdisplay/hd44780.c b/drivers/auxdisplay/hd44780.c new file mode 100644 index 000000000000..036eec404289 --- /dev/null +++ b/drivers/auxdisplay/hd44780.c @@ -0,0 +1,326 @@ +/* + * HD44780 Character LCD driver for Linux + * + * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> + * Copyright (C) 2016-2017 Glider bvba + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/slab.h> + +#include <misc/charlcd.h> + + +enum hd44780_pin { + /* Order does matter due to writing to GPIO array subsets! */ + PIN_DATA0, /* Optional */ + PIN_DATA1, /* Optional */ + PIN_DATA2, /* Optional */ + PIN_DATA3, /* Optional */ + PIN_DATA4, + PIN_DATA5, + PIN_DATA6, + PIN_DATA7, + PIN_CTRL_RS, + PIN_CTRL_RW, /* Optional */ + PIN_CTRL_E, + PIN_CTRL_BL, /* Optional */ + PIN_NUM +}; + +struct hd44780 { + struct gpio_desc *pins[PIN_NUM]; +}; + +static void hd44780_backlight(struct charlcd *lcd, int on) +{ + struct hd44780 *hd = lcd->drvdata; + + if (hd->pins[PIN_CTRL_BL]) + gpiod_set_value_cansleep(hd->pins[PIN_CTRL_BL], on); +} + +static void hd44780_strobe_gpio(struct hd44780 *hd) +{ + /* Maintain the data during 20 us before the strobe */ + udelay(20); + + gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 1); + + /* Maintain the strobe during 40 us */ + udelay(40); + + gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 0); +} + +/* write to an LCD panel register in 8 bit GPIO mode */ +static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs) +{ + int values[10]; /* for DATA[0-7], RS, RW */ + unsigned int i, n; + + for (i = 0; i < 8; i++) + values[PIN_DATA0 + i] = !!(val & BIT(i)); + values[PIN_CTRL_RS] = rs; + n = 9; + if (hd->pins[PIN_CTRL_RW]) { + values[PIN_CTRL_RW] = 0; + n++; + } + + /* Present the data to the port */ + gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], values); + + hd44780_strobe_gpio(hd); +} + +/* write to an LCD panel register in 4 bit GPIO mode */ +static void hd44780_write_gpio4(struct hd44780 *hd, u8 val, unsigned int rs) +{ + int values[10]; /* for DATA[0-7], RS, RW, but DATA[0-3] is unused */ + unsigned int i, n; + + /* High nibble + RS, RW */ + for (i = 4; i < 8; i++) + values[PIN_DATA0 + i] = !!(val & BIT(i)); + values[PIN_CTRL_RS] = rs; + n = 5; + if (hd->pins[PIN_CTRL_RW]) { + values[PIN_CTRL_RW] = 0; + n++; + } + + /* Present the data to the port */ + gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], + &values[PIN_DATA4]); + + hd44780_strobe_gpio(hd); + + /* Low nibble */ + for (i = 0; i < 4; i++) + values[PIN_DATA4 + i] = !!(val & BIT(i)); + + /* Present the data to the port */ + gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], + &values[PIN_DATA4]); + + hd44780_strobe_gpio(hd); +} + +/* Send a command to the LCD panel in 8 bit GPIO mode */ +static void hd44780_write_cmd_gpio8(struct charlcd *lcd, int cmd) +{ + struct hd44780 *hd = lcd->drvdata; + + hd44780_write_gpio8(hd, cmd, 0); + + /* The shortest command takes at least 120 us */ + udelay(120); +} + +/* Send data to the LCD panel in 8 bit GPIO mode */ +static void hd44780_write_data_gpio8(struct charlcd *lcd, int data) +{ + struct hd44780 *hd = lcd->drvdata; + + hd44780_write_gpio8(hd, data, 1); + + /* The shortest data takes at least 45 us */ + udelay(45); +} + +static const struct charlcd_ops hd44780_ops_gpio8 = { + .write_cmd = hd44780_write_cmd_gpio8, + .write_data = hd44780_write_data_gpio8, + .backlight = hd44780_backlight, +}; + +/* Send a command to the LCD panel in 4 bit GPIO mode */ +static void hd44780_write_cmd_gpio4(struct charlcd *lcd, int cmd) +{ + struct hd44780 *hd = lcd->drvdata; + + hd44780_write_gpio4(hd, cmd, 0); + + /* The shortest command takes at least 120 us */ + udelay(120); +} + +/* Send 4-bits of a command to the LCD panel in raw 4 bit GPIO mode */ +static void hd44780_write_cmd_raw_gpio4(struct charlcd *lcd, int cmd) +{ + int values[10]; /* for DATA[0-7], RS, RW, but DATA[0-3] is unused */ + struct hd44780 *hd = lcd->drvdata; + unsigned int i, n; + + /* Command nibble + RS, RW */ + for (i = 0; i < 4; i++) + values[PIN_DATA4 + i] = !!(cmd & BIT(i)); + values[PIN_CTRL_RS] = 0; + n = 5; + if (hd->pins[PIN_CTRL_RW]) { + values[PIN_CTRL_RW] = 0; + n++; + } + + /* Present the data to the port */ + gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], + &values[PIN_DATA4]); + + hd44780_strobe_gpio(hd); +} + +/* Send data to the LCD panel in 4 bit GPIO mode */ +static void hd44780_write_data_gpio4(struct charlcd *lcd, int data) +{ + struct hd44780 *hd = lcd->drvdata; + + hd44780_write_gpio4(hd, data, 1); + + /* The shortest data takes at least 45 us */ + udelay(45); +} + +static const struct charlcd_ops hd44780_ops_gpio4 = { + .write_cmd = hd44780_write_cmd_gpio4, + .write_cmd_raw4 = hd44780_write_cmd_raw_gpio4, + .write_data = hd44780_write_data_gpio4, + .backlight = hd44780_backlight, +}; + +static int hd44780_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + unsigned int i, base; + struct charlcd *lcd; + struct hd44780 *hd; + int ifwidth, ret; + + /* Required pins */ + ifwidth = gpiod_count(dev, "data"); + if (ifwidth < 0) + return ifwidth; + + switch (ifwidth) { + case 4: + base = PIN_DATA4; + break; + case 8: + base = PIN_DATA0; + break; + default: + return -EINVAL; + } + + lcd = charlcd_alloc(sizeof(struct hd44780)); + if (!lcd) + return -ENOMEM; + + hd = lcd->drvdata; + + for (i = 0; i < ifwidth; i++) { + hd->pins[base + i] = devm_gpiod_get_index(dev, "data", i, + GPIOD_OUT_LOW); + if (IS_ERR(hd->pins[base + i])) { + ret = PTR_ERR(hd->pins[base + i]); + goto fail; + } + } + + hd->pins[PIN_CTRL_E] = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(hd->pins[PIN_CTRL_E])) { + ret = PTR_ERR(hd->pins[PIN_CTRL_E]); + goto fail; + } + + hd->pins[PIN_CTRL_RS] = devm_gpiod_get(dev, "rs", GPIOD_OUT_HIGH); + if (IS_ERR(hd->pins[PIN_CTRL_RS])) { + ret = PTR_ERR(hd->pins[PIN_CTRL_RS]); + goto fail; + } + + /* Optional pins */ + hd->pins[PIN_CTRL_RW] = devm_gpiod_get_optional(dev, "rw", + GPIOD_OUT_LOW); + if (IS_ERR(hd->pins[PIN_CTRL_RW])) { + ret = PTR_ERR(hd->pins[PIN_CTRL_RW]); + goto fail; + } + + hd->pins[PIN_CTRL_BL] = devm_gpiod_get_optional(dev, "backlight", + GPIOD_OUT_LOW); + if (IS_ERR(hd->pins[PIN_CTRL_BL])) { + ret = PTR_ERR(hd->pins[PIN_CTRL_BL]); + goto fail; + } + + /* Required properties */ + ret = device_property_read_u32(dev, "display-height-chars", + &lcd->height); + if (ret) + goto fail; + ret = device_property_read_u32(dev, "display-width-chars", &lcd->width); + if (ret) + goto fail; + + /* + * On displays with more than two rows, the internal buffer width is + * usually equal to the display width + */ + if (lcd->height > 2) + lcd->bwidth = lcd->width; + + /* Optional properties */ + device_property_read_u32(dev, "internal-buffer-width", &lcd->bwidth); + + lcd->ifwidth = ifwidth; + lcd->ops = ifwidth == 8 ? &hd44780_ops_gpio8 : &hd44780_ops_gpio4; + + ret = charlcd_register(lcd); + if (ret) + goto fail; + + platform_set_drvdata(pdev, lcd); + return 0; + +fail: + kfree(lcd); + return ret; +} + +static int hd44780_remove(struct platform_device *pdev) +{ + struct charlcd *lcd = platform_get_drvdata(pdev); + + charlcd_unregister(lcd); + return 0; +} + +static const struct of_device_id hd44780_of_match[] = { + { .compatible = "hit,hd44780" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, hd44780_of_match); + +static struct platform_driver hd44780_driver = { + .probe = hd44780_probe, + .remove = hd44780_remove, + .driver = { + .name = "hd44780", + .of_match_table = hd44780_of_match, + }, +}; + +module_platform_driver(hd44780_driver); +MODULE_DESCRIPTION("HD44780 Character LCD driver"); +MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index f66b45b235b0..fbfa5b4cc567 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -254,18 +254,22 @@ static bool ht16k33_keypad_scan(struct ht16k33_keypad *keypad) { const unsigned short *keycodes = keypad->dev->keycode; u16 new_state[HT16K33_MATRIX_KEYPAD_MAX_COLS]; - u8 data[HT16K33_MATRIX_KEYPAD_MAX_COLS * 2]; + __le16 data[HT16K33_MATRIX_KEYPAD_MAX_COLS]; unsigned long bits_changed; int row, col, code; + int rc; bool pressed = false; - if (i2c_smbus_read_i2c_block_data(keypad->client, 0x40, 6, data) != 6) { - dev_err(&keypad->client->dev, "Failed to read key data\n"); + rc = i2c_smbus_read_i2c_block_data(keypad->client, 0x40, + sizeof(data), (u8 *)data); + if (rc != sizeof(data)) { + dev_err(&keypad->client->dev, + "Failed to read key data, rc=%d\n", rc); return false; } for (col = 0; col < keypad->cols; col++) { - new_state[col] = (data[col * 2 + 1] << 8) | data[col * 2]; + new_state[col] = le16_to_cpu(data[col]); if (new_state[col]) pressed = true; bits_changed = keypad->last_key_state[col] ^ new_state[col]; @@ -278,7 +282,7 @@ static bool ht16k33_keypad_scan(struct ht16k33_keypad *keypad) } } input_sync(keypad->dev); - memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + memcpy(keypad->last_key_state, new_state, sizeof(u16) * keypad->cols); return pressed; } @@ -353,6 +357,12 @@ static int ht16k33_keypad_probe(struct i2c_client *client, err = matrix_keypad_parse_of_params(&client->dev, &rows, &cols); if (err) return err; + if (rows > HT16K33_MATRIX_KEYPAD_MAX_ROWS || + cols > HT16K33_MATRIX_KEYPAD_MAX_COLS) { + dev_err(&client->dev, "%u rows or %u cols out of range in DT\n", + rows, cols); + return -ERANGE; + } keypad->rows = rows; keypad->cols = cols; diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c index 83f1439e57fd..25306fa27251 100644 --- a/drivers/auxdisplay/img-ascii-lcd.c +++ b/drivers/auxdisplay/img-ascii-lcd.c @@ -220,6 +220,7 @@ static const struct of_device_id img_ascii_lcd_matches[] = { { .compatible = "mti,sead3-lcd", .data = &sead3_config }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, img_ascii_lcd_matches); /** * img_ascii_lcd_scroll() - scroll the display by a character diff --git a/drivers/misc/panel.c b/drivers/auxdisplay/panel.c index ef2ece0f26af..e0c014c2356f 100644 --- a/drivers/misc/panel.c +++ b/drivers/auxdisplay/panel.c @@ -1,6 +1,7 @@ /* * Front panel driver for Linux * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> + * Copyright (C) 2016-2017 Glider bvba * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -54,15 +55,12 @@ #include <linux/ctype.h> #include <linux/parport.h> #include <linux/list.h> -#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/workqueue.h> -#include <generated/utsrelease.h> #include <linux/io.h> #include <linux/uaccess.h> -#define LCD_MINOR 156 +#include <misc/charlcd.h> + #define KEYPAD_MINOR 185 #define LCD_MAXBYTES 256 /* max burst write */ @@ -76,9 +74,6 @@ /* a key repeats this times INPUT_POLL_TIME */ #define KEYPAD_REP_DELAY (2) -/* keep the light on this many seconds for each flash */ -#define FLASH_LIGHT_TEMPO (4) - /* converts an r_str() input to an active high, bits string : 000BAOSE */ #define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3) @@ -120,40 +115,6 @@ #define PIN_SELECP 17 #define PIN_NOT_SET 127 -#define LCD_FLAG_B 0x0004 /* blink on */ -#define LCD_FLAG_C 0x0008 /* cursor on */ -#define LCD_FLAG_D 0x0010 /* display on */ -#define LCD_FLAG_F 0x0020 /* large font mode */ -#define LCD_FLAG_N 0x0040 /* 2-rows mode */ -#define LCD_FLAG_L 0x0080 /* backlight enabled */ - -/* LCD commands */ -#define LCD_CMD_DISPLAY_CLEAR 0x01 /* Clear entire display */ - -#define LCD_CMD_ENTRY_MODE 0x04 /* Set entry mode */ -#define LCD_CMD_CURSOR_INC 0x02 /* Increment cursor */ - -#define LCD_CMD_DISPLAY_CTRL 0x08 /* Display control */ -#define LCD_CMD_DISPLAY_ON 0x04 /* Set display on */ -#define LCD_CMD_CURSOR_ON 0x02 /* Set cursor on */ -#define LCD_CMD_BLINK_ON 0x01 /* Set blink on */ - -#define LCD_CMD_SHIFT 0x10 /* Shift cursor/display */ -#define LCD_CMD_DISPLAY_SHIFT 0x08 /* Shift display instead of cursor */ -#define LCD_CMD_SHIFT_RIGHT 0x04 /* Shift display/cursor to the right */ - -#define LCD_CMD_FUNCTION_SET 0x20 /* Set function */ -#define LCD_CMD_DATA_LEN_8BITS 0x10 /* Set data length to 8 bits */ -#define LCD_CMD_TWO_LINES 0x08 /* Set to two display lines */ -#define LCD_CMD_FONT_5X10_DOTS 0x04 /* Set char font to 5x10 dots */ - -#define LCD_CMD_SET_CGRAM_ADDR 0x40 /* Set char generator RAM address */ - -#define LCD_CMD_SET_DDRAM_ADDR 0x80 /* Set display data RAM address */ - -#define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */ -#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */ - #define NOT_SET -1 /* macros to simplify use of the parallel port */ @@ -245,19 +206,10 @@ static wait_queue_head_t keypad_read_wait; static struct { bool enabled; bool initialized; - bool must_clear; - int height; - int width; - int bwidth; - int hwidth; int charset; int proto; - struct delayed_work bl_work; - struct mutex bl_tempo_lock; /* Protects access to bl_tempo */ - bool bl_tempo; - /* TODO: use union here? */ struct { int e; @@ -268,20 +220,7 @@ static struct { int bl; } pins; - /* contains the LCD config state */ - unsigned long int flags; - - /* Contains the LCD X and Y offset */ - struct { - unsigned long int x; - unsigned long int y; - } addr; - - /* Current escape sequence and it's length or -1 if outside */ - struct { - char buf[LCD_ESCAPE_LEN + 1]; - int len; - } esc_seq; + struct charlcd *charlcd; } lcd; /* Needed only for init */ @@ -464,17 +403,12 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; /* global variables */ /* Device single-open policy control */ -static atomic_t lcd_available = ATOMIC_INIT(1); static atomic_t keypad_available = ATOMIC_INIT(1); static struct pardevice *pprt; static int keypad_initialized; -static void (*lcd_write_cmd)(int); -static void (*lcd_write_data)(int); -static void (*lcd_clear_fast)(void); - static DEFINE_SPINLOCK(pprt_lock); static struct timer_list scan_timer; @@ -574,8 +508,6 @@ static int keypad_enabled = NOT_SET; module_param(keypad_enabled, int, 0000); MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead"); -static const unsigned char *lcd_char_conv; - /* for some LCD drivers (ks0074) we need a charset conversion table. */ static const unsigned char lcd_char_conv_ks0074[256] = { /* 0|8 1|9 2|A 3|B 4|C 5|D 6|E 7|F */ @@ -752,15 +684,6 @@ static void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val) } } -/* sleeps that many milliseconds with a reschedule */ -static void long_sleep(int ms) -{ - if (in_interrupt()) - mdelay(ms); - else - schedule_timeout_interruptible(msecs_to_jiffies(ms)); -} - /* * send a serial byte to the LCD panel. The caller is responsible for locking * if needed. @@ -792,8 +715,11 @@ static void lcd_send_serial(int byte) } /* turn the backlight on or off */ -static void __lcd_backlight(int on) +static void lcd_backlight(struct charlcd *charlcd, int on) { + if (lcd.pins.bl == PIN_NONE) + return; + /* The backlight is activated by setting the AUTOFEED line to +5V */ spin_lock_irq(&pprt_lock); if (on) @@ -804,46 +730,8 @@ static void __lcd_backlight(int on) spin_unlock_irq(&pprt_lock); } -static void lcd_backlight(int on) -{ - if (lcd.pins.bl == PIN_NONE) - return; - - mutex_lock(&lcd.bl_tempo_lock); - if (!lcd.bl_tempo) - __lcd_backlight(on); - mutex_unlock(&lcd.bl_tempo_lock); -} - -static void lcd_bl_off(struct work_struct *work) -{ - mutex_lock(&lcd.bl_tempo_lock); - if (lcd.bl_tempo) { - lcd.bl_tempo = false; - if (!(lcd.flags & LCD_FLAG_L)) - __lcd_backlight(0); - } - mutex_unlock(&lcd.bl_tempo_lock); -} - -/* turn the backlight on for a little while */ -static void lcd_poke(void) -{ - if (lcd.pins.bl == PIN_NONE) - return; - - cancel_delayed_work_sync(&lcd.bl_work); - - mutex_lock(&lcd.bl_tempo_lock); - if (!lcd.bl_tempo && !(lcd.flags & LCD_FLAG_L)) - __lcd_backlight(1); - lcd.bl_tempo = true; - schedule_delayed_work(&lcd.bl_work, FLASH_LIGHT_TEMPO * HZ); - mutex_unlock(&lcd.bl_tempo_lock); -} - /* send a command to the LCD panel in serial mode */ -static void lcd_write_cmd_s(int cmd) +static void lcd_write_cmd_s(struct charlcd *charlcd, int cmd) { spin_lock_irq(&pprt_lock); lcd_send_serial(0x1F); /* R/W=W, RS=0 */ @@ -854,7 +742,7 @@ static void lcd_write_cmd_s(int cmd) } /* send data to the LCD panel in serial mode */ -static void lcd_write_data_s(int data) +static void lcd_write_data_s(struct charlcd *charlcd, int data) { spin_lock_irq(&pprt_lock); lcd_send_serial(0x5F); /* R/W=W, RS=1 */ @@ -865,7 +753,7 @@ static void lcd_write_data_s(int data) } /* send a command to the LCD panel in 8 bits parallel mode */ -static void lcd_write_cmd_p8(int cmd) +static void lcd_write_cmd_p8(struct charlcd *charlcd, int cmd) { spin_lock_irq(&pprt_lock); /* present the data to the data port */ @@ -887,7 +775,7 @@ static void lcd_write_cmd_p8(int cmd) } /* send data to the LCD panel in 8 bits parallel mode */ -static void lcd_write_data_p8(int data) +static void lcd_write_data_p8(struct charlcd *charlcd, int data) { spin_lock_irq(&pprt_lock); /* present the data to the data port */ @@ -909,7 +797,7 @@ static void lcd_write_data_p8(int data) } /* send a command to the TI LCD panel */ -static void lcd_write_cmd_tilcd(int cmd) +static void lcd_write_cmd_tilcd(struct charlcd *charlcd, int cmd) { spin_lock_irq(&pprt_lock); /* present the data to the control port */ @@ -919,7 +807,7 @@ static void lcd_write_cmd_tilcd(int cmd) } /* send data to the TI LCD panel */ -static void lcd_write_data_tilcd(int data) +static void lcd_write_data_tilcd(struct charlcd *charlcd, int data) { spin_lock_irq(&pprt_lock); /* present the data to the data port */ @@ -928,47 +816,13 @@ static void lcd_write_data_tilcd(int data) spin_unlock_irq(&pprt_lock); } -static void lcd_gotoxy(void) -{ - lcd_write_cmd(LCD_CMD_SET_DDRAM_ADDR - | (lcd.addr.y ? lcd.hwidth : 0) - /* - * we force the cursor to stay at the end of the - * line if it wants to go farther - */ - | ((lcd.addr.x < lcd.bwidth) ? lcd.addr.x & - (lcd.hwidth - 1) : lcd.bwidth - 1)); -} - -static void lcd_home(void) -{ - lcd.addr.x = 0; - lcd.addr.y = 0; - lcd_gotoxy(); -} - -static void lcd_print(char c) -{ - if (lcd.addr.x < lcd.bwidth) { - if (lcd_char_conv) - c = lcd_char_conv[(unsigned char)c]; - lcd_write_data(c); - lcd.addr.x++; - } - /* prevents the cursor from wrapping onto the next line */ - if (lcd.addr.x == lcd.bwidth) - lcd_gotoxy(); -} - /* fills the display with spaces and resets X/Y */ -static void lcd_clear_fast_s(void) +static void lcd_clear_fast_s(struct charlcd *charlcd) { int pos; - lcd_home(); - spin_lock_irq(&pprt_lock); - for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { + for (pos = 0; pos < charlcd->height * charlcd->hwidth; pos++) { lcd_send_serial(0x5F); /* R/W=W, RS=1 */ lcd_send_serial(' ' & 0x0F); lcd_send_serial((' ' >> 4) & 0x0F); @@ -976,19 +830,15 @@ static void lcd_clear_fast_s(void) udelay(40); } spin_unlock_irq(&pprt_lock); - - lcd_home(); } /* fills the display with spaces and resets X/Y */ -static void lcd_clear_fast_p8(void) +static void lcd_clear_fast_p8(struct charlcd *charlcd) { int pos; - lcd_home(); - spin_lock_irq(&pprt_lock); - for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { + for (pos = 0; pos < charlcd->height * charlcd->hwidth; pos++) { /* present the data to the data port */ w_dtr(pprt, ' '); @@ -1010,488 +860,62 @@ static void lcd_clear_fast_p8(void) udelay(45); } spin_unlock_irq(&pprt_lock); - - lcd_home(); } /* fills the display with spaces and resets X/Y */ -static void lcd_clear_fast_tilcd(void) +static void lcd_clear_fast_tilcd(struct charlcd *charlcd) { int pos; - lcd_home(); - spin_lock_irq(&pprt_lock); - for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { + for (pos = 0; pos < charlcd->height * charlcd->hwidth; pos++) { /* present the data to the data port */ w_dtr(pprt, ' '); udelay(60); } spin_unlock_irq(&pprt_lock); - - lcd_home(); -} - -/* clears the display and resets X/Y */ -static void lcd_clear_display(void) -{ - lcd_write_cmd(LCD_CMD_DISPLAY_CLEAR); - lcd.addr.x = 0; - lcd.addr.y = 0; - /* we must wait a few milliseconds (15) */ - long_sleep(15); } -static void lcd_init_display(void) -{ - lcd.flags = ((lcd.height > 1) ? LCD_FLAG_N : 0) - | LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B; - - long_sleep(20); /* wait 20 ms after power-up for the paranoid */ - - /* 8bits, 1 line, small fonts; let's do it 3 times */ - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); - long_sleep(10); - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); - long_sleep(10); - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); - long_sleep(10); - - /* set font height and lines number */ - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS - | ((lcd.flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) - | ((lcd.flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0) - ); - long_sleep(10); - - /* display off, cursor off, blink off */ - lcd_write_cmd(LCD_CMD_DISPLAY_CTRL); - long_sleep(10); - - lcd_write_cmd(LCD_CMD_DISPLAY_CTRL /* set display mode */ - | ((lcd.flags & LCD_FLAG_D) ? LCD_CMD_DISPLAY_ON : 0) - | ((lcd.flags & LCD_FLAG_C) ? LCD_CMD_CURSOR_ON : 0) - | ((lcd.flags & LCD_FLAG_B) ? LCD_CMD_BLINK_ON : 0) - ); - - lcd_backlight((lcd.flags & LCD_FLAG_L) ? 1 : 0); - - long_sleep(10); - - /* entry mode set : increment, cursor shifting */ - lcd_write_cmd(LCD_CMD_ENTRY_MODE | LCD_CMD_CURSOR_INC); +static struct charlcd_ops charlcd_serial_ops = { + .write_cmd = lcd_write_cmd_s, + .write_data = lcd_write_data_s, + .clear_fast = lcd_clear_fast_s, + .backlight = lcd_backlight, +}; - lcd_clear_display(); -} +static struct charlcd_ops charlcd_parallel_ops = { + .write_cmd = lcd_write_cmd_p8, + .write_data = lcd_write_data_p8, + .clear_fast = lcd_clear_fast_p8, + .backlight = lcd_backlight, +}; -/* - * These are the file operation function for user access to /dev/lcd - * This function can also be called from inside the kernel, by - * setting file and ppos to NULL. - * - */ +static struct charlcd_ops charlcd_tilcd_ops = { + .write_cmd = lcd_write_cmd_tilcd, + .write_data = lcd_write_data_tilcd, + .clear_fast = lcd_clear_fast_tilcd, + .backlight = lcd_backlight, +}; -static inline int handle_lcd_special_code(void) +/* initialize the LCD driver */ +static void lcd_init(void) { - /* LCD special codes */ - - int processed = 0; + struct charlcd *charlcd; - char *esc = lcd.esc_seq.buf + 2; - int oldflags = lcd.flags; - - /* check for display mode flags */ - switch (*esc) { - case 'D': /* Display ON */ - lcd.flags |= LCD_FLAG_D; - processed = 1; - break; - case 'd': /* Display OFF */ - lcd.flags &= ~LCD_FLAG_D; - processed = 1; - break; - case 'C': /* Cursor ON */ - lcd.flags |= LCD_FLAG_C; - processed = 1; - break; - case 'c': /* Cursor OFF */ - lcd.flags &= ~LCD_FLAG_C; - processed = 1; - break; - case 'B': /* Blink ON */ - lcd.flags |= LCD_FLAG_B; - processed = 1; - break; - case 'b': /* Blink OFF */ - lcd.flags &= ~LCD_FLAG_B; - processed = 1; - break; - case '+': /* Back light ON */ - lcd.flags |= LCD_FLAG_L; - processed = 1; - break; - case '-': /* Back light OFF */ - lcd.flags &= ~LCD_FLAG_L; - processed = 1; - break; - case '*': - /* flash back light */ - lcd_poke(); - processed = 1; - break; - case 'f': /* Small Font */ - lcd.flags &= ~LCD_FLAG_F; - processed = 1; - break; - case 'F': /* Large Font */ - lcd.flags |= LCD_FLAG_F; - processed = 1; - break; - case 'n': /* One Line */ - lcd.flags &= ~LCD_FLAG_N; - processed = 1; - break; - case 'N': /* Two Lines */ - lcd.flags |= LCD_FLAG_N; - break; - case 'l': /* Shift Cursor Left */ - if (lcd.addr.x > 0) { - /* back one char if not at end of line */ - if (lcd.addr.x < lcd.bwidth) - lcd_write_cmd(LCD_CMD_SHIFT); - lcd.addr.x--; - } - processed = 1; - break; - case 'r': /* shift cursor right */ - if (lcd.addr.x < lcd.width) { - /* allow the cursor to pass the end of the line */ - if (lcd.addr.x < (lcd.bwidth - 1)) - lcd_write_cmd(LCD_CMD_SHIFT | - LCD_CMD_SHIFT_RIGHT); - lcd.addr.x++; - } - processed = 1; - break; - case 'L': /* shift display left */ - lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT); - processed = 1; - break; - case 'R': /* shift display right */ - lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT | - LCD_CMD_SHIFT_RIGHT); - processed = 1; - break; - case 'k': { /* kill end of line */ - int x; - - for (x = lcd.addr.x; x < lcd.bwidth; x++) - lcd_write_data(' '); - - /* restore cursor position */ - lcd_gotoxy(); - processed = 1; - break; - } - case 'I': /* reinitialize display */ - lcd_init_display(); - processed = 1; - break; - case 'G': { - /* Generator : LGcxxxxx...xx; must have <c> between '0' - * and '7', representing the numerical ASCII code of the - * redefined character, and <xx...xx> a sequence of 16 - * hex digits representing 8 bytes for each character. - * Most LCDs will only use 5 lower bits of the 7 first - * bytes. - */ - - unsigned char cgbytes[8]; - unsigned char cgaddr; - int cgoffset; - int shift; - char value; - int addr; - - if (!strchr(esc, ';')) - break; - - esc++; - - cgaddr = *(esc++) - '0'; - if (cgaddr > 7) { - processed = 1; - break; - } - - cgoffset = 0; - shift = 0; - value = 0; - while (*esc && cgoffset < 8) { - shift ^= 4; - if (*esc >= '0' && *esc <= '9') { - value |= (*esc - '0') << shift; - } else if (*esc >= 'A' && *esc <= 'Z') { - value |= (*esc - 'A' + 10) << shift; - } else if (*esc >= 'a' && *esc <= 'z') { - value |= (*esc - 'a' + 10) << shift; - } else { - esc++; - continue; - } - - if (shift == 0) { - cgbytes[cgoffset++] = value; - value = 0; - } - - esc++; - } - - lcd_write_cmd(LCD_CMD_SET_CGRAM_ADDR | (cgaddr * 8)); - for (addr = 0; addr < cgoffset; addr++) - lcd_write_data(cgbytes[addr]); - - /* ensures that we stop writing to CGRAM */ - lcd_gotoxy(); - processed = 1; - break; - } - case 'x': /* gotoxy : LxXXX[yYYY]; */ - case 'y': /* gotoxy : LyYYY[xXXX]; */ - if (!strchr(esc, ';')) - break; - - while (*esc) { - if (*esc == 'x') { - esc++; - if (kstrtoul(esc, 10, &lcd.addr.x) < 0) - break; - } else if (*esc == 'y') { - esc++; - if (kstrtoul(esc, 10, &lcd.addr.y) < 0) - break; - } else { - break; - } - } - - lcd_gotoxy(); - processed = 1; - break; - } - - /* TODO: This indent party here got ugly, clean it! */ - /* Check whether one flag was changed */ - if (oldflags != lcd.flags) { - /* check whether one of B,C,D flags were changed */ - if ((oldflags ^ lcd.flags) & - (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D)) - /* set display mode */ - lcd_write_cmd(LCD_CMD_DISPLAY_CTRL - | ((lcd.flags & LCD_FLAG_D) - ? LCD_CMD_DISPLAY_ON : 0) - | ((lcd.flags & LCD_FLAG_C) - ? LCD_CMD_CURSOR_ON : 0) - | ((lcd.flags & LCD_FLAG_B) - ? LCD_CMD_BLINK_ON : 0)); - /* check whether one of F,N flags was changed */ - else if ((oldflags ^ lcd.flags) & (LCD_FLAG_F | LCD_FLAG_N)) - lcd_write_cmd(LCD_CMD_FUNCTION_SET - | LCD_CMD_DATA_LEN_8BITS - | ((lcd.flags & LCD_FLAG_F) - ? LCD_CMD_FONT_5X10_DOTS - : 0) - | ((lcd.flags & LCD_FLAG_N) - ? LCD_CMD_TWO_LINES - : 0)); - /* check whether L flag was changed */ - else if ((oldflags ^ lcd.flags) & (LCD_FLAG_L)) - lcd_backlight(!!(lcd.flags & LCD_FLAG_L)); - } - - return processed; -} - -static void lcd_write_char(char c) -{ - /* first, we'll test if we're in escape mode */ - if ((c != '\n') && lcd.esc_seq.len >= 0) { - /* yes, let's add this char to the buffer */ - lcd.esc_seq.buf[lcd.esc_seq.len++] = c; - lcd.esc_seq.buf[lcd.esc_seq.len] = 0; - } else { - /* aborts any previous escape sequence */ - lcd.esc_seq.len = -1; - - switch (c) { - case LCD_ESCAPE_CHAR: - /* start of an escape sequence */ - lcd.esc_seq.len = 0; - lcd.esc_seq.buf[lcd.esc_seq.len] = 0; - break; - case '\b': - /* go back one char and clear it */ - if (lcd.addr.x > 0) { - /* - * check if we're not at the - * end of the line - */ - if (lcd.addr.x < lcd.bwidth) - /* back one char */ - lcd_write_cmd(LCD_CMD_SHIFT); - lcd.addr.x--; - } - /* replace with a space */ - lcd_write_data(' '); - /* back one char again */ - lcd_write_cmd(LCD_CMD_SHIFT); - break; - case '\014': - /* quickly clear the display */ - lcd_clear_fast(); - break; - case '\n': - /* - * flush the remainder of the current line and - * go to the beginning of the next line - */ - for (; lcd.addr.x < lcd.bwidth; lcd.addr.x++) - lcd_write_data(' '); - lcd.addr.x = 0; - lcd.addr.y = (lcd.addr.y + 1) % lcd.height; - lcd_gotoxy(); - break; - case '\r': - /* go to the beginning of the same line */ - lcd.addr.x = 0; - lcd_gotoxy(); - break; - case '\t': - /* print a space instead of the tab */ - lcd_print(' '); - break; - default: - /* simply print this char */ - lcd_print(c); - break; - } - } + charlcd = charlcd_alloc(0); + if (!charlcd) + return; /* - * now we'll see if we're in an escape mode and if the current - * escape sequence can be understood. + * Init lcd struct with load-time values to preserve exact + * current functionality (at least for now). */ - if (lcd.esc_seq.len >= 2) { - int processed = 0; - - if (!strcmp(lcd.esc_seq.buf, "[2J")) { - /* clear the display */ - lcd_clear_fast(); - processed = 1; - } else if (!strcmp(lcd.esc_seq.buf, "[H")) { - /* cursor to home */ - lcd_home(); - processed = 1; - } - /* codes starting with ^[[L */ - else if ((lcd.esc_seq.len >= 3) && - (lcd.esc_seq.buf[0] == '[') && - (lcd.esc_seq.buf[1] == 'L')) { - processed = handle_lcd_special_code(); - } - - /* LCD special escape codes */ - /* - * flush the escape sequence if it's been processed - * or if it is getting too long. - */ - if (processed || (lcd.esc_seq.len >= LCD_ESCAPE_LEN)) - lcd.esc_seq.len = -1; - } /* escape codes */ -} + charlcd->height = lcd_height; + charlcd->width = lcd_width; + charlcd->bwidth = lcd_bwidth; + charlcd->hwidth = lcd_hwidth; -static ssize_t lcd_write(struct file *file, - const char __user *buf, size_t count, loff_t *ppos) -{ - const char __user *tmp = buf; - char c; - - for (; count-- > 0; (*ppos)++, tmp++) { - if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) - /* - * let's be a little nice with other processes - * that need some CPU - */ - schedule(); - - if (get_user(c, tmp)) - return -EFAULT; - - lcd_write_char(c); - } - - return tmp - buf; -} - -static int lcd_open(struct inode *inode, struct file *file) -{ - if (!atomic_dec_and_test(&lcd_available)) - return -EBUSY; /* open only once at a time */ - - if (file->f_mode & FMODE_READ) /* device is write-only */ - return -EPERM; - - if (lcd.must_clear) { - lcd_clear_display(); - lcd.must_clear = false; - } - return nonseekable_open(inode, file); -} - -static int lcd_release(struct inode *inode, struct file *file) -{ - atomic_inc(&lcd_available); - return 0; -} - -static const struct file_operations lcd_fops = { - .write = lcd_write, - .open = lcd_open, - .release = lcd_release, - .llseek = no_llseek, -}; - -static struct miscdevice lcd_dev = { - .minor = LCD_MINOR, - .name = "lcd", - .fops = &lcd_fops, -}; - -/* public function usable from the kernel for any purpose */ -static void panel_lcd_print(const char *s) -{ - const char *tmp = s; - int count = strlen(s); - - if (lcd.enabled && lcd.initialized) { - for (; count-- > 0; tmp++) { - if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) - /* - * let's be a little nice with other processes - * that need some CPU - */ - schedule(); - - lcd_write_char(*tmp); - } - } -} - -/* initialize the LCD driver */ -static void lcd_init(void) -{ switch (selected_lcd_type) { case LCD_TYPE_OLD: /* parallel mode, 8 bits */ @@ -1500,10 +924,10 @@ static void lcd_init(void) lcd.pins.e = PIN_STROBE; lcd.pins.rs = PIN_AUTOLF; - lcd.width = 40; - lcd.bwidth = 40; - lcd.hwidth = 64; - lcd.height = 2; + charlcd->width = 40; + charlcd->bwidth = 40; + charlcd->hwidth = 64; + charlcd->height = 2; break; case LCD_TYPE_KS0074: /* serial mode, ks0074 */ @@ -1513,10 +937,10 @@ static void lcd_init(void) lcd.pins.cl = PIN_STROBE; lcd.pins.da = PIN_D0; - lcd.width = 16; - lcd.bwidth = 40; - lcd.hwidth = 16; - lcd.height = 2; + charlcd->width = 16; + charlcd->bwidth = 40; + charlcd->hwidth = 16; + charlcd->height = 2; break; case LCD_TYPE_NEXCOM: /* parallel mode, 8 bits, generic */ @@ -1526,10 +950,10 @@ static void lcd_init(void) lcd.pins.rs = PIN_SELECP; lcd.pins.rw = PIN_INITP; - lcd.width = 16; - lcd.bwidth = 40; - lcd.hwidth = 64; - lcd.height = 2; + charlcd->width = 16; + charlcd->bwidth = 40; + charlcd->hwidth = 64; + charlcd->height = 2; break; case LCD_TYPE_CUSTOM: /* customer-defined */ @@ -1545,22 +969,22 @@ static void lcd_init(void) lcd.pins.e = PIN_STROBE; lcd.pins.rs = PIN_SELECP; - lcd.width = 16; - lcd.bwidth = 40; - lcd.hwidth = 64; - lcd.height = 2; + charlcd->width = 16; + charlcd->bwidth = 40; + charlcd->hwidth = 64; + charlcd->height = 2; break; } /* Overwrite with module params set on loading */ if (lcd_height != NOT_SET) - lcd.height = lcd_height; + charlcd->height = lcd_height; if (lcd_width != NOT_SET) - lcd.width = lcd_width; + charlcd->width = lcd_width; if (lcd_bwidth != NOT_SET) - lcd.bwidth = lcd_bwidth; + charlcd->bwidth = lcd_bwidth; if (lcd_hwidth != NOT_SET) - lcd.hwidth = lcd_hwidth; + charlcd->hwidth = lcd_hwidth; if (lcd_charset != NOT_SET) lcd.charset = lcd_charset; if (lcd_proto != NOT_SET) @@ -1579,19 +1003,17 @@ static void lcd_init(void) lcd.pins.bl = lcd_bl_pin; /* this is used to catch wrong and default values */ - if (lcd.width <= 0) - lcd.width = DEFAULT_LCD_WIDTH; - if (lcd.bwidth <= 0) - lcd.bwidth = DEFAULT_LCD_BWIDTH; - if (lcd.hwidth <= 0) - lcd.hwidth = DEFAULT_LCD_HWIDTH; - if (lcd.height <= 0) - lcd.height = DEFAULT_LCD_HEIGHT; + if (charlcd->width <= 0) + charlcd->width = DEFAULT_LCD_WIDTH; + if (charlcd->bwidth <= 0) + charlcd->bwidth = DEFAULT_LCD_BWIDTH; + if (charlcd->hwidth <= 0) + charlcd->hwidth = DEFAULT_LCD_HWIDTH; + if (charlcd->height <= 0) + charlcd->height = DEFAULT_LCD_HEIGHT; if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */ - lcd_write_cmd = lcd_write_cmd_s; - lcd_write_data = lcd_write_data_s; - lcd_clear_fast = lcd_clear_fast_s; + charlcd->ops = &charlcd_serial_ops; if (lcd.pins.cl == PIN_NOT_SET) lcd.pins.cl = DEFAULT_LCD_PIN_SCL; @@ -1599,9 +1021,7 @@ static void lcd_init(void) lcd.pins.da = DEFAULT_LCD_PIN_SDA; } else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */ - lcd_write_cmd = lcd_write_cmd_p8; - lcd_write_data = lcd_write_data_p8; - lcd_clear_fast = lcd_clear_fast_p8; + charlcd->ops = &charlcd_parallel_ops; if (lcd.pins.e == PIN_NOT_SET) lcd.pins.e = DEFAULT_LCD_PIN_E; @@ -1610,9 +1030,7 @@ static void lcd_init(void) if (lcd.pins.rw == PIN_NOT_SET) lcd.pins.rw = DEFAULT_LCD_PIN_RW; } else { - lcd_write_cmd = lcd_write_cmd_tilcd; - lcd_write_data = lcd_write_data_tilcd; - lcd_clear_fast = lcd_clear_fast_tilcd; + charlcd->ops = &charlcd_tilcd_ops; } if (lcd.pins.bl == PIN_NOT_SET) @@ -1635,14 +1053,9 @@ static void lcd_init(void) lcd.charset = DEFAULT_LCD_CHARSET; if (lcd.charset == LCD_CHARSET_KS0074) - lcd_char_conv = lcd_char_conv_ks0074; + charlcd->char_conv = lcd_char_conv_ks0074; else - lcd_char_conv = NULL; - - if (lcd.pins.bl != PIN_NONE) { - mutex_init(&lcd.bl_tempo_lock); - INIT_DELAYED_WORK(&lcd.bl_work, lcd_bl_off); - } + charlcd->char_conv = NULL; pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E], lcd_bits[LCD_PORT_C][LCD_BIT_E]); @@ -1657,25 +1070,8 @@ static void lcd_init(void) pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA], lcd_bits[LCD_PORT_C][LCD_BIT_DA]); - /* - * before this line, we must NOT send anything to the display. - * Since lcd_init_display() needs to write data, we have to - * enable mark the LCD initialized just before. - */ + lcd.charlcd = charlcd; lcd.initialized = true; - lcd_init_display(); - - /* display a short message */ -#ifdef CONFIG_PANEL_CHANGE_MESSAGE -#ifdef CONFIG_PANEL_BOOT_MESSAGE - panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE); -#endif -#else - panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE); -#endif - /* clear the display on the next device opening */ - lcd.must_clear = true; - lcd_home(); } /* @@ -2011,7 +1407,7 @@ static void panel_scan_timer(void) } if (keypressed && lcd.enabled && lcd.initialized) - lcd_poke(); + charlcd_poke(lcd.charlcd); mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME); } @@ -2175,35 +1571,6 @@ static void keypad_init(void) /* device initialization */ /**************************************************/ -static int panel_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (lcd.enabled && lcd.initialized) { - switch (code) { - case SYS_DOWN: - panel_lcd_print - ("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+"); - break; - case SYS_HALT: - panel_lcd_print - ("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+"); - break; - case SYS_POWER_OFF: - panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+"); - break; - default: - break; - } - } - return NOTIFY_DONE; -} - -static struct notifier_block panel_notifier = { - panel_notify_sys, - NULL, - 0 -}; - static void panel_attach(struct parport *port) { struct pardev_cb panel_cb; @@ -2239,7 +1606,7 @@ static void panel_attach(struct parport *port) */ if (lcd.enabled) { lcd_init(); - if (misc_register(&lcd_dev)) + if (!lcd.charlcd || charlcd_register(lcd.charlcd)) goto err_unreg_device; } @@ -2248,13 +1615,14 @@ static void panel_attach(struct parport *port) if (misc_register(&keypad_dev)) goto err_lcd_unreg; } - register_reboot_notifier(&panel_notifier); return; err_lcd_unreg: if (lcd.enabled) - misc_deregister(&lcd_dev); + charlcd_unregister(lcd.charlcd); err_unreg_device: + kfree(lcd.charlcd); + lcd.charlcd = NULL; parport_unregister_device(pprt); pprt = NULL; } @@ -2278,20 +1646,16 @@ static void panel_detach(struct parport *port) } if (lcd.enabled) { - panel_lcd_print("\x0cLCD driver unloaded.\x1b[Lc\x1b[Lb\x1b[L-"); - misc_deregister(&lcd_dev); - if (lcd.pins.bl != PIN_NONE) { - cancel_delayed_work_sync(&lcd.bl_work); - __lcd_backlight(0); - } + charlcd_unregister(lcd.charlcd); lcd.initialized = false; + kfree(lcd.charlcd); + lcd.charlcd = NULL; } /* TODO: free all input signals */ parport_release(pprt); parport_unregister_device(pprt); pprt = NULL; - unregister_reboot_notifier(&panel_notifier); } static struct parport_driver panel_driver = { @@ -2369,10 +1733,6 @@ static int __init panel_init_module(void) * Init lcd struct with load-time values to preserve exact * current functionality (at least for now). */ - lcd.height = lcd_height; - lcd.width = lcd_width; - lcd.bwidth = lcd_bwidth; - lcd.hwidth = lcd_hwidth; lcd.charset = lcd_charset; lcd.proto = lcd_proto; lcd.pins.e = lcd_e_pin; @@ -2381,9 +1741,6 @@ static int __init panel_init_module(void) lcd.pins.cl = lcd_cl_pin; lcd.pins.da = lcd_da_pin; lcd.pins.bl = lcd_bl_pin; - - /* Leave it for now, just in case */ - lcd.esc_seq.len = -1; } switch (selected_keypad_type) { diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c index 4f337375252e..5406b90bf626 100644 --- a/drivers/char/hangcheck-timer.c +++ b/drivers/char/hangcheck-timer.c @@ -32,7 +32,7 @@ * timer and 180 seconds for the margin of error. IOW, a timer is set * for 60 seconds. When the timer fires, the callback checks the * actual duration that the timer waited. If the duration exceeds the - * alloted time and margin (here 60 + 180, or 240 seconds), the machine + * allotted time and margin (here 60 + 180, or 240 seconds), the machine * is restarted. A healthy machine will have the duration match the * expected timeout very closely. */ diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 8bdc38d81adf..b941e6d59fd6 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -575,7 +575,7 @@ static inline unsigned long hpet_time_div(struct hpets *hpets, } static int -hpet_ioctl_common(struct hpet_dev *devp, int cmd, unsigned long arg, +hpet_ioctl_common(struct hpet_dev *devp, unsigned int cmd, unsigned long arg, struct hpet_info *info) { struct hpet_timer __iomem *timer; diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 8069b361b8dd..c9cd1ea6844a 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -109,7 +109,7 @@ static const struct file_operations misc_proc_fops = { }; #endif -static int misc_open(struct inode * inode, struct file * file) +static int misc_open(struct inode *inode, struct file *file) { int minor = iminor(inode); struct miscdevice *c; @@ -150,7 +150,7 @@ static int misc_open(struct inode * inode, struct file * file) err = 0; replace_fops(file, new_fops); if (file->f_op->open) - err = file->f_op->open(inode,file); + err = file->f_op->open(inode, file); fail: mutex_unlock(&misc_mtx); return err; @@ -182,7 +182,7 @@ static const struct file_operations misc_fops = { * failure. */ -int misc_register(struct miscdevice * misc) +int misc_register(struct miscdevice *misc) { dev_t dev; int err = 0; @@ -194,6 +194,7 @@ int misc_register(struct miscdevice * misc) if (is_dynamic) { int i = find_first_zero_bit(misc_minors, DYNAMIC_MINORS); + if (i >= DYNAMIC_MINORS) { err = -EBUSY; goto out; @@ -287,13 +288,13 @@ static int __init misc_init(void) goto fail_remove; err = -EIO; - if (register_chrdev(MISC_MAJOR,"misc",&misc_fops)) + if (register_chrdev(MISC_MAJOR, "misc", &misc_fops)) goto fail_printk; misc_class->devnode = misc_devnode; return 0; fail_printk: - printk("unable to get major %d for misc devices\n", MISC_MAJOR); + pr_err("unable to get major %d for misc devices\n", MISC_MAJOR); class_destroy(misc_class); fail_remove: if (ret) diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index a9c2fa3c81e5..7b75669d3670 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -43,6 +43,7 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/numa.h> +#include <linux/refcount.h> #include <asm/page.h> #include <asm/pgtable.h> #include <linux/atomic.h> @@ -89,7 +90,7 @@ static int is_sn2; * protect in fork case where multiple tasks share the vma_data. */ struct vma_data { - atomic_t refcnt; /* Number of vmas sharing the data. */ + refcount_t refcnt; /* Number of vmas sharing the data. */ spinlock_t lock; /* Serialize access to this structure. */ int count; /* Number of pages allocated. */ enum mspec_page_type type; /* Type of pages allocated. */ @@ -144,7 +145,7 @@ mspec_open(struct vm_area_struct *vma) struct vma_data *vdata; vdata = vma->vm_private_data; - atomic_inc(&vdata->refcnt); + refcount_inc(&vdata->refcnt); } /* @@ -162,7 +163,7 @@ mspec_close(struct vm_area_struct *vma) vdata = vma->vm_private_data; - if (!atomic_dec_and_test(&vdata->refcnt)) + if (!refcount_dec_and_test(&vdata->refcnt)) return; last_index = (vdata->vm_end - vdata->vm_start) >> PAGE_SHIFT; @@ -274,7 +275,7 @@ mspec_mmap(struct file *file, struct vm_area_struct *vma, vdata->vm_end = vma->vm_end; vdata->type = type; spin_lock_init(&vdata->lock); - atomic_set(&vdata->refcnt, 1); + refcount_set(&vdata->refcnt, 1); vma->vm_private_data = vdata; vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP; diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c index 9dec9f551b83..322b8a51ffc6 100644 --- a/drivers/char/tpm/tpm-chip.c +++ b/drivers/char/tpm/tpm-chip.c @@ -218,8 +218,6 @@ struct tpm_chip *tpm_chip_alloc(struct device *pdev, cdev_init(&chip->cdevs, &tpmrm_fops); chip->cdev.owner = THIS_MODULE; chip->cdevs.owner = THIS_MODULE; - chip->cdev.kobj.parent = &chip->dev.kobj; - chip->cdevs.kobj.parent = &chip->devs.kobj; chip->work_space.context_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!chip->work_space.context_buf) { @@ -275,45 +273,24 @@ static int tpm_add_char_device(struct tpm_chip *chip) { int rc; - rc = cdev_add(&chip->cdev, chip->dev.devt, 1); + rc = cdev_device_add(&chip->cdev, &chip->dev); if (rc) { dev_err(&chip->dev, - "unable to cdev_add() %s, major %d, minor %d, err=%d\n", + "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n", dev_name(&chip->dev), MAJOR(chip->dev.devt), MINOR(chip->dev.devt), rc); return rc; } - rc = device_add(&chip->dev); - if (rc) { - dev_err(&chip->dev, - "unable to device_register() %s, major %d, minor %d, err=%d\n", - dev_name(&chip->dev), MAJOR(chip->dev.devt), - MINOR(chip->dev.devt), rc); - - cdev_del(&chip->cdev); - return rc; - } - - if (chip->flags & TPM_CHIP_FLAG_TPM2) - rc = cdev_add(&chip->cdevs, chip->devs.devt, 1); - if (rc) { - dev_err(&chip->dev, - "unable to cdev_add() %s, major %d, minor %d, err=%d\n", - dev_name(&chip->devs), MAJOR(chip->devs.devt), - MINOR(chip->devs.devt), rc); - return rc; - } - - if (chip->flags & TPM_CHIP_FLAG_TPM2) - rc = device_add(&chip->devs); - if (rc) { - dev_err(&chip->dev, - "unable to device_register() %s, major %d, minor %d, err=%d\n", - dev_name(&chip->devs), MAJOR(chip->devs.devt), - MINOR(chip->devs.devt), rc); - cdev_del(&chip->cdevs); - return rc; + if (chip->flags & TPM_CHIP_FLAG_TPM2) { + rc = cdev_device_add(&chip->cdevs, &chip->devs); + if (rc) { + dev_err(&chip->devs, + "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n", + dev_name(&chip->devs), MAJOR(chip->devs.devt), + MINOR(chip->devs.devt), rc); + return rc; + } } /* Make the chip available. */ @@ -326,8 +303,7 @@ static int tpm_add_char_device(struct tpm_chip *chip) static void tpm_del_char_device(struct tpm_chip *chip) { - cdev_del(&chip->cdev); - device_del(&chip->dev); + cdev_device_del(&chip->cdev, &chip->dev); /* Make the chip unavailable. */ mutex_lock(&idr_lock); @@ -449,10 +425,8 @@ void tpm_chip_unregister(struct tpm_chip *chip) { tpm_del_legacy_sysfs(chip); tpm_bios_log_teardown(chip); - if (chip->flags & TPM_CHIP_FLAG_TPM2) { - cdev_del(&chip->cdevs); - device_del(&chip->devs); - } + if (chip->flags & TPM_CHIP_FLAG_TPM2) + cdev_device_del(&chip->cdevs, &chip->devs); tpm_del_char_device(chip); } EXPORT_SYMBOL_GPL(tpm_chip_unregister); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 87fe111d0be6..7d041d026680 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -2304,7 +2304,7 @@ static int __init init(void) pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL); if (!pdrvdata.debugfs_dir) - pr_warning("Error creating debugfs dir for virtio-ports\n"); + pr_warn("Error creating debugfs dir for virtio-ports\n"); INIT_LIST_HEAD(&pdrvdata.consoles); INIT_LIST_HEAD(&pdrvdata.portdevs); diff --git a/drivers/dax/dax.c b/drivers/dax/dax.c index 806f180c80d8..19795eb35579 100644 --- a/drivers/dax/dax.c +++ b/drivers/dax/dax.c @@ -703,13 +703,8 @@ static void dax_dev_release(struct device *dev) kfree(dax_dev); } -static void unregister_dax_dev(void *dev) +static void kill_dax_dev(struct dax_dev *dax_dev) { - struct dax_dev *dax_dev = to_dax_dev(dev); - struct cdev *cdev = &dax_dev->cdev; - - dev_dbg(dev, "%s\n", __func__); - /* * Note, rcu is not protecting the liveness of dax_dev, rcu is * ensuring that any fault handlers that might have seen @@ -720,8 +715,17 @@ static void unregister_dax_dev(void *dev) dax_dev->alive = false; synchronize_srcu(&dax_srcu); unmap_mapping_range(dax_dev->inode->i_mapping, 0, 0, 1); - cdev_del(cdev); - device_unregister(dev); +} + +static void unregister_dax_dev(void *dev) +{ + struct dax_dev *dax_dev = to_dax_dev(dev); + + dev_dbg(dev, "%s\n", __func__); + + kill_dax_dev(dax_dev); + cdev_device_del(&dax_dev->cdev, dev); + put_device(dev); } struct dax_dev *devm_create_dax_dev(struct dax_region *dax_region, @@ -772,18 +776,13 @@ struct dax_dev *devm_create_dax_dev(struct dax_region *dax_region, goto err_inode; } - /* device_initialize() so cdev can reference kobj parent */ + /* from here on we're committed to teardown via dax_dev_release() */ device_initialize(dev); cdev = &dax_dev->cdev; cdev_init(cdev, &dax_fops); cdev->owner = parent->driver->owner; - cdev->kobj.parent = &dev->kobj; - rc = cdev_add(&dax_dev->cdev, dev_t, 1); - if (rc) - goto err_cdev; - /* from here on we're committed to teardown via dax_dev_release() */ dax_dev->num_resources = count; dax_dev->alive = true; dax_dev->region = dax_region; @@ -795,8 +794,10 @@ struct dax_dev *devm_create_dax_dev(struct dax_region *dax_region, dev->groups = dax_attribute_groups; dev->release = dax_dev_release; dev_set_name(dev, "dax%d.%d", dax_region->id, dax_dev->id); - rc = device_add(dev); + + rc = cdev_device_add(cdev, dev); if (rc) { + kill_dax_dev(dax_dev); put_device(dev); return ERR_PTR(rc); } @@ -807,8 +808,6 @@ struct dax_dev *devm_create_dax_dev(struct dax_region *dax_region, return dax_dev; - err_cdev: - iput(dax_dev->inode); err_inode: ida_simple_remove(&dax_minor_ida, minor); err_minor: diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index fc09c76248b4..32f2dc8e4702 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -52,6 +52,13 @@ config EXTCON_INTEL_INT3496 This ACPI device is typically found on Intel Baytrail or Cherrytrail based tablets, or other Baytrail / Cherrytrail devices. +config EXTCON_INTEL_CHT_WC + tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver" + depends on INTEL_SOC_PMIC_CHTWC + help + Say Y here to enable extcon support for charger detection / control + on the Intel Cherrytrail Whiskey Cove PMIC. + config EXTCON_MAX14577 tristate "Maxim MAX14577/77836 EXTCON Support" depends on MFD_MAX14577 diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 237ac3f953c2..ecfa95804427 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o +obj-$(CONFIG_EXTCON_INTEL_CHT_WC) += extcon-intel-cht-wc.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index ed78b7c26627..e2d78cd7030d 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -51,6 +51,9 @@ #define HPDET_DEBOUNCE 500 #define DEFAULT_MICD_TIMEOUT 2000 +#define ARIZONA_HPDET_WAIT_COUNT 15 +#define ARIZONA_HPDET_WAIT_DELAY_MS 20 + #define QUICK_HEADPHONE_MAX_OHM 3 #define MICROPHONE_MIN_OHM 1257 #define MICROPHONE_MAX_OHM 30000 @@ -1049,6 +1052,40 @@ static void arizona_hpdet_work(struct work_struct *work) mutex_unlock(&info->lock); } +static int arizona_hpdet_wait(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + unsigned int val; + int i, ret; + + for (i = 0; i < ARIZONA_HPDET_WAIT_COUNT; i++) { + ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, + &val); + if (ret) { + dev_err(arizona->dev, + "Failed to read HPDET state: %d\n", ret); + return ret; + } + + switch (info->hpdet_ip_version) { + case 0: + if (val & ARIZONA_HP_DONE) + return 0; + break; + default: + if (val & ARIZONA_HP_DONE_B) + return 0; + break; + } + + msleep(ARIZONA_HPDET_WAIT_DELAY_MS); + } + + dev_warn(arizona->dev, "HPDET did not appear to complete\n"); + + return -ETIMEDOUT; +} + static irqreturn_t arizona_jackdet(int irq, void *data) { struct arizona_extcon_info *info = data; @@ -1155,6 +1192,15 @@ static irqreturn_t arizona_jackdet(int irq, void *data) "Removal report failed: %d\n", ret); } + /* + * If the jack was removed during a headphone detection we + * need to wait for the headphone detection to finish, as + * it can not be aborted. We don't want to be able to start + * a new headphone detection from a fresh insert until this + * one is finished. + */ + arizona_hpdet_wait(info); + regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c new file mode 100644 index 000000000000..91a0023074af --- /dev/null +++ b/drivers/extcon/extcon-intel-cht-wc.c @@ -0,0 +1,395 @@ +/* + * Extcon charger detection driver for Intel Cherrytrail Whiskey Cove PMIC + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> + * + * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: + * Copyright (C) 2013-2015 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/extcon.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define CHT_WC_PHYCTRL 0x5e07 + +#define CHT_WC_CHGRCTRL0 0x5e16 +#define CHT_WC_CHGRCTRL0_CHGRRESET BIT(0) +#define CHT_WC_CHGRCTRL0_EMRGCHREN BIT(1) +#define CHT_WC_CHGRCTRL0_EXTCHRDIS BIT(2) +#define CHT_WC_CHGRCTRL0_SWCONTROL BIT(3) +#define CHT_WC_CHGRCTRL0_TTLCK_MASK BIT(4) +#define CHT_WC_CHGRCTRL0_CCSM_OFF_MASK BIT(5) +#define CHT_WC_CHGRCTRL0_DBPOFF_MASK BIT(6) +#define CHT_WC_CHGRCTRL0_WDT_NOKICK BIT(7) + +#define CHT_WC_CHGRCTRL1 0x5e17 + +#define CHT_WC_USBSRC 0x5e29 +#define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0) +#define CHT_WC_USBSRC_STS_SUCCESS 2 +#define CHT_WC_USBSRC_STS_FAIL 3 +#define CHT_WC_USBSRC_TYPE_SHIFT 2 +#define CHT_WC_USBSRC_TYPE_MASK GENMASK(5, 2) +#define CHT_WC_USBSRC_TYPE_NONE 0 +#define CHT_WC_USBSRC_TYPE_SDP 1 +#define CHT_WC_USBSRC_TYPE_DCP 2 +#define CHT_WC_USBSRC_TYPE_CDP 3 +#define CHT_WC_USBSRC_TYPE_ACA 4 +#define CHT_WC_USBSRC_TYPE_SE1 5 +#define CHT_WC_USBSRC_TYPE_MHL 6 +#define CHT_WC_USBSRC_TYPE_FLOAT_DP_DN 7 +#define CHT_WC_USBSRC_TYPE_OTHER 8 +#define CHT_WC_USBSRC_TYPE_DCP_EXTPHY 9 + +#define CHT_WC_PWRSRC_IRQ 0x6e03 +#define CHT_WC_PWRSRC_IRQ_MASK 0x6e0f +#define CHT_WC_PWRSRC_STS 0x6e1e +#define CHT_WC_PWRSRC_VBUS BIT(0) +#define CHT_WC_PWRSRC_DC BIT(1) +#define CHT_WC_PWRSRC_BAT BIT(2) +#define CHT_WC_PWRSRC_ID_GND BIT(3) +#define CHT_WC_PWRSRC_ID_FLOAT BIT(4) + +#define CHT_WC_VBUS_GPIO_CTLO 0x6e2d +#define CHT_WC_VBUS_GPIO_CTLO_OUTPUT BIT(0) + +enum cht_wc_usb_id { + USB_ID_OTG, + USB_ID_GND, + USB_ID_FLOAT, + USB_RID_A, + USB_RID_B, + USB_RID_C, +}; + +enum cht_wc_mux_select { + MUX_SEL_PMIC = 0, + MUX_SEL_SOC, +}; + +static const unsigned int cht_wc_extcon_cables[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_ACA, + EXTCON_NONE, +}; + +struct cht_wc_extcon_data { + struct device *dev; + struct regmap *regmap; + struct extcon_dev *edev; + unsigned int previous_cable; + bool usb_host; +}; + +static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) +{ + if (pwrsrc_sts & CHT_WC_PWRSRC_ID_GND) + return USB_ID_GND; + if (pwrsrc_sts & CHT_WC_PWRSRC_ID_FLOAT) + return USB_ID_FLOAT; + + /* + * Once we have iio support for the gpadc we should read the USBID + * gpadc channel here and determine ACA role based on that. + */ + return USB_ID_FLOAT; +} + +static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext, + bool ignore_errors) +{ + int ret, usbsrc, status; + unsigned long timeout; + + /* Charger detection can take upto 600ms, wait 800ms max. */ + timeout = jiffies + msecs_to_jiffies(800); + do { + ret = regmap_read(ext->regmap, CHT_WC_USBSRC, &usbsrc); + if (ret) { + dev_err(ext->dev, "Error reading usbsrc: %d\n", ret); + return ret; + } + + status = usbsrc & CHT_WC_USBSRC_STS_MASK; + if (status == CHT_WC_USBSRC_STS_SUCCESS || + status == CHT_WC_USBSRC_STS_FAIL) + break; + + msleep(50); /* Wait a bit before retrying */ + } while (time_before(jiffies, timeout)); + + if (status != CHT_WC_USBSRC_STS_SUCCESS) { + if (ignore_errors) + return EXTCON_CHG_USB_SDP; /* Save fallback */ + + if (status == CHT_WC_USBSRC_STS_FAIL) + dev_warn(ext->dev, "Could not detect charger type\n"); + else + dev_warn(ext->dev, "Timeout detecting charger type\n"); + return EXTCON_CHG_USB_SDP; /* Save fallback */ + } + + usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT; + switch (usbsrc) { + default: + dev_warn(ext->dev, + "Unhandled charger type %d, defaulting to SDP\n", + ret); + /* Fall through, treat as SDP */ + case CHT_WC_USBSRC_TYPE_SDP: + case CHT_WC_USBSRC_TYPE_FLOAT_DP_DN: + case CHT_WC_USBSRC_TYPE_OTHER: + return EXTCON_CHG_USB_SDP; + case CHT_WC_USBSRC_TYPE_CDP: + return EXTCON_CHG_USB_CDP; + case CHT_WC_USBSRC_TYPE_DCP: + case CHT_WC_USBSRC_TYPE_DCP_EXTPHY: + case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */ + return EXTCON_CHG_USB_DCP; + case CHT_WC_USBSRC_TYPE_ACA: + return EXTCON_CHG_USB_ACA; + } +} + +static void cht_wc_extcon_set_phymux(struct cht_wc_extcon_data *ext, u8 state) +{ + int ret; + + ret = regmap_write(ext->regmap, CHT_WC_PHYCTRL, state); + if (ret) + dev_err(ext->dev, "Error writing phyctrl: %d\n", ret); +} + +static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext, + bool enable) +{ + int ret, val; + + val = enable ? CHT_WC_VBUS_GPIO_CTLO_OUTPUT : 0; + + /* + * The 5V boost converter is enabled through a gpio on the PMIC, since + * there currently is no gpio driver we access the gpio reg directly. + */ + ret = regmap_update_bits(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, + CHT_WC_VBUS_GPIO_CTLO_OUTPUT, val); + if (ret) + dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret); +} + +/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */ +static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext, + unsigned int cable, bool state) +{ + extcon_set_state_sync(ext->edev, cable, state); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(ext->edev, EXTCON_USB, state); +} + +static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) +{ + int ret, pwrsrc_sts, id; + unsigned int cable = EXTCON_NONE; + /* Ignore errors in host mode, as the 5v boost converter is on then */ + bool ignore_get_charger_errors = ext->usb_host; + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); + if (ret) { + dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret); + return; + } + + id = cht_wc_extcon_get_id(ext, pwrsrc_sts); + if (id == USB_ID_GND) { + /* The 5v boost causes a false VBUS / SDP detect, skip */ + goto charger_det_done; + } + + /* Plugged into a host/charger or not connected? */ + if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) { + /* Route D+ and D- to PMIC for future charger detection */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); + goto set_state; + } + + ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors); + if (ret >= 0) + cable = ret; + +charger_det_done: + /* Route D+ and D- to SoC for the host or gadget controller */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC); + +set_state: + if (cable != ext->previous_cable) { + cht_wc_extcon_set_state(ext, cable, true); + cht_wc_extcon_set_state(ext, ext->previous_cable, false); + ext->previous_cable = cable; + } + + ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A)); + extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host); +} + +static irqreturn_t cht_wc_extcon_isr(int irq, void *data) +{ + struct cht_wc_extcon_data *ext = data; + int ret, irqs; + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_IRQ, &irqs); + if (ret) { + dev_err(ext->dev, "Error reading irqs: %d\n", ret); + return IRQ_NONE; + } + + cht_wc_extcon_pwrsrc_event(ext); + + ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ, irqs); + if (ret) { + dev_err(ext->dev, "Error writing irqs: %d\n", ret); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable) +{ + int ret, mask, val; + + mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF_MASK; + val = enable ? mask : 0; + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val); + if (ret) + dev_err(ext->dev, "Error setting sw control: %d\n", ret); + + return ret; +} + +static int cht_wc_extcon_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct cht_wc_extcon_data *ext; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ext = devm_kzalloc(&pdev->dev, sizeof(*ext), GFP_KERNEL); + if (!ext) + return -ENOMEM; + + ext->dev = &pdev->dev; + ext->regmap = pmic->regmap; + ext->previous_cable = EXTCON_NONE; + + /* Initialize extcon device */ + ext->edev = devm_extcon_dev_allocate(ext->dev, cht_wc_extcon_cables); + if (IS_ERR(ext->edev)) + return PTR_ERR(ext->edev); + + /* + * When a host-cable is detected the BIOS enables an external 5v boost + * converter to power connected devices there are 2 problems with this: + * 1) This gets seen by the external battery charger as a valid Vbus + * supply and it then tries to feed Vsys from this creating a + * feedback loop which causes aprox. 300 mA extra battery drain + * (and unless we drive the external-charger-disable pin high it + * also tries to charge the battery causing even more feedback). + * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply + * Since the external battery charger has its own 5v boost converter + * which does not have these issues, we simply turn the separate + * external 5v boost converter off and leave it off entirely. + */ + cht_wc_extcon_set_5v_boost(ext, false); + + /* Enable sw control */ + ret = cht_wc_extcon_sw_control(ext, true); + if (ret) + return ret; + + /* Register extcon device */ + ret = devm_extcon_dev_register(ext->dev, ext->edev); + if (ret) { + dev_err(ext->dev, "Error registering extcon device: %d\n", ret); + goto disable_sw_control; + } + + /* Route D+ and D- to PMIC for initial charger detection */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); + + /* Get initial state */ + cht_wc_extcon_pwrsrc_event(ext); + + ret = devm_request_threaded_irq(ext->dev, irq, NULL, cht_wc_extcon_isr, + IRQF_ONESHOT, pdev->name, ext); + if (ret) { + dev_err(ext->dev, "Error requesting interrupt: %d\n", ret); + goto disable_sw_control; + } + + /* Unmask irqs */ + ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK, + (int)~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_ID_GND | + CHT_WC_PWRSRC_ID_FLOAT)); + if (ret) { + dev_err(ext->dev, "Error writing irq-mask: %d\n", ret); + goto disable_sw_control; + } + + platform_set_drvdata(pdev, ext); + + return 0; + +disable_sw_control: + cht_wc_extcon_sw_control(ext, false); + return ret; +} + +static int cht_wc_extcon_remove(struct platform_device *pdev) +{ + struct cht_wc_extcon_data *ext = platform_get_drvdata(pdev); + + cht_wc_extcon_sw_control(ext, false); + + return 0; +} + +static const struct platform_device_id cht_wc_extcon_table[] = { + { .name = "cht_wcove_pwrsrc" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, cht_wc_extcon_table); + +static struct platform_driver cht_wc_extcon_driver = { + .probe = cht_wc_extcon_probe, + .remove = cht_wc_extcon_remove, + .id_table = cht_wc_extcon_table, + .driver = { + .name = "cht_wcove_pwrsrc", + }, +}; +module_platform_driver(cht_wc_extcon_driver); + +MODULE_DESCRIPTION("Intel Cherrytrail Whiskey Cove PMIC extcon driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index ca904e8b3235..2af4369a2d73 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -413,6 +413,12 @@ static int palmas_usb_resume(struct device *dev) if (palmas_usb->enable_gpio_id_detection) disable_irq_wake(palmas_usb->gpio_id_irq); } + + /* check if GPIO states changed while suspend/resume */ + if (palmas_usb->enable_gpio_vbus_detection) + palmas_vbus_irq_handler(palmas_usb->gpio_vbus_irq, palmas_usb); + palmas_gpio_id_detect(&palmas_usb->wq_detectid.work); + return 0; }; #endif diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index a5e1882b4ca6..9c925b05b7aa 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -26,7 +26,6 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/workqueue.h> -#include <linux/acpi.h> #include <linux/pinctrl/consumer.h> #define USB_GPIO_DEBOUNCE_MS 20 /* ms */ @@ -111,7 +110,7 @@ static int usb_extcon_probe(struct platform_device *pdev) struct usb_extcon_info *info; int ret; - if (!np && !ACPI_HANDLE(dev)) + if (!np) return -EINVAL; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); @@ -195,7 +194,7 @@ static int usb_extcon_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, info); - device_init_wakeup(dev, true); + device_set_wakeup_capable(&pdev->dev, true); /* Perform initial detection */ usb_extcon_detect_cable(&info->wq_detcable.work); @@ -282,9 +281,8 @@ static int usb_extcon_resume(struct device *dev) if (info->vbus_gpiod) enable_irq(info->vbus_irq); - if (!device_may_wakeup(dev)) - queue_delayed_work(system_power_efficient_wq, - &info->wq_detcable, 0); + queue_delayed_work(system_power_efficient_wq, + &info->wq_detcable, 0); return ret; } diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index e7750545469f..f422a78ba342 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -230,9 +230,6 @@ struct extcon_cable { }; static struct class *extcon_class; -#if defined(CONFIG_ANDROID) -static struct class_compat *switch_class; -#endif /* CONFIG_ANDROID */ static LIST_HEAD(extcon_dev_list); static DEFINE_MUTEX(extcon_dev_list_lock); @@ -380,7 +377,7 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr, for (i = 0; i < edev->max_supported; i++) { count += sprintf(buf + count, "%s=%d\n", extcon_info[edev->supported_cable[i]].name, - !!(edev->state & (1 << i))); + !!(edev->state & BIT(i))); } return count; @@ -1032,12 +1029,6 @@ static int create_extcon_class(void) if (IS_ERR(extcon_class)) return PTR_ERR(extcon_class); extcon_class->dev_groups = extcon_groups; - -#if defined(CONFIG_ANDROID) - switch_class = class_compat_register("switch"); - if (WARN(!switch_class, "cannot allocate")) - return -ENOMEM; -#endif /* CONFIG_ANDROID */ } return 0; @@ -1259,10 +1250,6 @@ int extcon_dev_register(struct extcon_dev *edev) put_device(&edev->dev); goto err_dev; } -#if defined(CONFIG_ANDROID) - if (switch_class) - ret = class_compat_create_link(switch_class, &edev->dev, NULL); -#endif /* CONFIG_ANDROID */ spin_lock_init(&edev->lock); @@ -1350,10 +1337,6 @@ void extcon_dev_unregister(struct extcon_dev *edev) kfree(edev->cables); } -#if defined(CONFIG_ANDROID) - if (switch_class) - class_compat_remove_link(switch_class, &edev->dev, NULL); -#endif put_device(&edev->dev); } EXPORT_SYMBOL_GPL(extcon_dev_unregister); @@ -1424,9 +1407,6 @@ module_init(extcon_class_init); static void __exit extcon_class_exit(void) { -#if defined(CONFIG_ANDROID) - class_compat_unregister(switch_class); -#endif class_destroy(extcon_class); } module_exit(extcon_class_exit); diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index 0de83508f321..939d259ddf19 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -124,7 +124,7 @@ static struct fw_node *fw_node_create(u32 sid, int port_count, int color) node->initiated_reset = SELF_ID_PHY_INITIATOR(sid); node->port_count = port_count; - atomic_set(&node->ref_count, 1); + refcount_set(&node->ref_count, 1); INIT_LIST_HEAD(&node->link); return node; diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h index e1480ff683d2..c07962ead5e4 100644 --- a/drivers/firewire/core.h +++ b/drivers/firewire/core.h @@ -12,7 +12,7 @@ #include <linux/slab.h> #include <linux/types.h> -#include <linux/atomic.h> +#include <linux/refcount.h> struct device; struct fw_card; @@ -184,7 +184,7 @@ struct fw_node { * local node to this node. */ u8 max_depth:4; /* Maximum depth to any leaf node */ u8 max_hops:4; /* Max hops in this sub tree */ - atomic_t ref_count; + refcount_t ref_count; /* For serializing node topology into a list. */ struct list_head link; @@ -197,14 +197,14 @@ struct fw_node { static inline struct fw_node *fw_node_get(struct fw_node *node) { - atomic_inc(&node->ref_count); + refcount_inc(&node->ref_count); return node; } static inline void fw_node_put(struct fw_node *node) { - if (atomic_dec_and_test(&node->ref_count)) + if (refcount_dec_and_test(&node->ref_count)) kfree(node); } diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig index 29c8cdda82a1..f16b381a569c 100644 --- a/drivers/firmware/google/Kconfig +++ b/drivers/firmware/google/Kconfig @@ -1,18 +1,16 @@ -config GOOGLE_FIRMWARE +menuconfig GOOGLE_FIRMWARE bool "Google Firmware Drivers" - depends on X86 default n help These firmware drivers are used by Google's servers. They are only useful if you are working directly on one of their proprietary servers. If in doubt, say "N". -menu "Google Firmware Drivers" - depends on GOOGLE_FIRMWARE +if GOOGLE_FIRMWARE config GOOGLE_SMI tristate "SMI interface for Google platforms" - depends on ACPI && DMI && EFI + depends on X86 && ACPI && DMI && EFI select EFI_VARS help Say Y here if you want to enable SMI callbacks for Google @@ -20,12 +18,57 @@ config GOOGLE_SMI clearing the EFI event log and reading and writing NVRAM variables. +config GOOGLE_COREBOOT_TABLE + tristate + depends on GOOGLE_COREBOOT_TABLE_ACPI || GOOGLE_COREBOOT_TABLE_OF + +config GOOGLE_COREBOOT_TABLE_ACPI + tristate "Coreboot Table Access - ACPI" + depends on ACPI + select GOOGLE_COREBOOT_TABLE + help + This option enables the coreboot_table module, which provides other + firmware modules to access to the coreboot table. The coreboot table + pointer is accessed through the ACPI "GOOGCB00" object. + If unsure say N. + +config GOOGLE_COREBOOT_TABLE_OF + tristate "Coreboot Table Access - Device Tree" + depends on OF + select GOOGLE_COREBOOT_TABLE + help + This option enable the coreboot_table module, which provide other + firmware modules to access coreboot table. The coreboot table pointer + is accessed through the device tree node /firmware/coreboot. + If unsure say N. + config GOOGLE_MEMCONSOLE - tristate "Firmware Memory Console" - depends on DMI + tristate + depends on GOOGLE_MEMCONSOLE_X86_LEGACY || GOOGLE_MEMCONSOLE_COREBOOT + +config GOOGLE_MEMCONSOLE_X86_LEGACY + tristate "Firmware Memory Console - X86 Legacy support" + depends on X86 && ACPI && DMI + select GOOGLE_MEMCONSOLE help This option enables the kernel to search for a firmware log in the EBDA on Google servers. If found, this log is exported to userland in the file /sys/firmware/log. -endmenu +config GOOGLE_MEMCONSOLE_COREBOOT + tristate "Firmware Memory Console" + depends on GOOGLE_COREBOOT_TABLE + select GOOGLE_MEMCONSOLE + help + This option enables the kernel to search for a firmware log in + the coreboot table. If found, this log is exported to userland + in the file /sys/firmware/log. + +config GOOGLE_VPD + tristate "Vital Product Data" + depends on GOOGLE_COREBOOT_TABLE + help + This option enables the kernel to expose the content of Google VPD + under /sys/firmware/vpd. + +endif # GOOGLE_FIRMWARE diff --git a/drivers/firmware/google/Makefile b/drivers/firmware/google/Makefile index 54a294e3cb61..bc4de02202ad 100644 --- a/drivers/firmware/google/Makefile +++ b/drivers/firmware/google/Makefile @@ -1,3 +1,11 @@ obj-$(CONFIG_GOOGLE_SMI) += gsmi.o -obj-$(CONFIG_GOOGLE_MEMCONSOLE) += memconsole.o +obj-$(CONFIG_GOOGLE_COREBOOT_TABLE) += coreboot_table.o +obj-$(CONFIG_GOOGLE_COREBOOT_TABLE_ACPI) += coreboot_table-acpi.o +obj-$(CONFIG_GOOGLE_COREBOOT_TABLE_OF) += coreboot_table-of.o +obj-$(CONFIG_GOOGLE_MEMCONSOLE) += memconsole.o +obj-$(CONFIG_GOOGLE_MEMCONSOLE_COREBOOT) += memconsole-coreboot.o +obj-$(CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY) += memconsole-x86-legacy.o + +vpd-sysfs-y := vpd.o vpd_decode.o +obj-$(CONFIG_GOOGLE_VPD) += vpd-sysfs.o diff --git a/drivers/firmware/google/coreboot_table-acpi.c b/drivers/firmware/google/coreboot_table-acpi.c new file mode 100644 index 000000000000..fb98db2d20e2 --- /dev/null +++ b/drivers/firmware/google/coreboot_table-acpi.c @@ -0,0 +1,88 @@ +/* + * coreboot_table-acpi.c + * + * Using ACPI to locate Coreboot table and provide coreboot table access. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "coreboot_table.h" + +static int coreboot_table_acpi_probe(struct platform_device *pdev) +{ + phys_addr_t phyaddr; + resource_size_t len; + struct coreboot_table_header __iomem *header = NULL; + struct resource *res; + void __iomem *ptr = NULL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + len = resource_size(res); + if (!res->start || !len) + return -EINVAL; + + phyaddr = res->start; + header = ioremap_cache(phyaddr, sizeof(*header)); + if (header == NULL) + return -ENOMEM; + + ptr = ioremap_cache(phyaddr, + header->header_bytes + header->table_bytes); + iounmap(header); + if (!ptr) + return -ENOMEM; + + return coreboot_table_init(ptr); +} + +static int coreboot_table_acpi_remove(struct platform_device *pdev) +{ + return coreboot_table_exit(); +} + +static const struct acpi_device_id cros_coreboot_acpi_match[] = { + { "GOOGCB00", 0 }, + { "BOOT0000", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, cros_coreboot_acpi_match); + +static struct platform_driver coreboot_table_acpi_driver = { + .probe = coreboot_table_acpi_probe, + .remove = coreboot_table_acpi_remove, + .driver = { + .name = "coreboot_table_acpi", + .acpi_match_table = ACPI_PTR(cros_coreboot_acpi_match), + }, +}; + +static int __init coreboot_table_acpi_init(void) +{ + return platform_driver_register(&coreboot_table_acpi_driver); +} + +module_init(coreboot_table_acpi_init); + +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/coreboot_table-of.c b/drivers/firmware/google/coreboot_table-of.c new file mode 100644 index 000000000000..727acdc83e83 --- /dev/null +++ b/drivers/firmware/google/coreboot_table-of.c @@ -0,0 +1,82 @@ +/* + * coreboot_table-of.c + * + * Coreboot table access through open firmware. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> + +#include "coreboot_table.h" + +static int coreboot_table_of_probe(struct platform_device *pdev) +{ + struct device_node *fw_dn = pdev->dev.of_node; + void __iomem *ptr; + + ptr = of_iomap(fw_dn, 0); + of_node_put(fw_dn); + if (!ptr) + return -ENOMEM; + + return coreboot_table_init(ptr); +} + +static int coreboot_table_of_remove(struct platform_device *pdev) +{ + return coreboot_table_exit(); +} + +static const struct of_device_id coreboot_of_match[] = { + { .compatible = "coreboot" }, + {}, +}; + +static struct platform_driver coreboot_table_of_driver = { + .probe = coreboot_table_of_probe, + .remove = coreboot_table_of_remove, + .driver = { + .name = "coreboot_table_of", + .of_match_table = coreboot_of_match, + }, +}; + +static int __init platform_coreboot_table_of_init(void) +{ + struct platform_device *pdev; + struct device_node *of_node; + + /* Limit device creation to the presence of /firmware/coreboot node */ + of_node = of_find_node_by_path("/firmware/coreboot"); + if (!of_node) + return -ENODEV; + + if (!of_match_node(coreboot_of_match, of_node)) + return -ENODEV; + + pdev = of_platform_device_create(of_node, "coreboot_table_of", NULL); + if (!pdev) + return -ENODEV; + + return platform_driver_register(&coreboot_table_of_driver); +} + +module_init(platform_coreboot_table_of_init); + +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/coreboot_table.c b/drivers/firmware/google/coreboot_table.c new file mode 100644 index 000000000000..0019d3ec18dd --- /dev/null +++ b/drivers/firmware/google/coreboot_table.c @@ -0,0 +1,94 @@ +/* + * coreboot_table.c + * + * Module providing coreboot table access. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "coreboot_table.h" + +struct coreboot_table_entry { + u32 tag; + u32 size; +}; + +static struct coreboot_table_header __iomem *ptr_header; + +/* + * This function parses the coreboot table for an entry that contains the base + * address of the given entry tag. The coreboot table consists of a header + * directly followed by a number of small, variable-sized entries, which each + * contain an identifying tag and their length as the first two fields. + */ +int coreboot_table_find(int tag, void *data, size_t data_size) +{ + struct coreboot_table_header header; + struct coreboot_table_entry entry; + void *ptr_entry; + int i; + + if (!ptr_header) + return -EPROBE_DEFER; + + memcpy_fromio(&header, ptr_header, sizeof(header)); + + if (strncmp(header.signature, "LBIO", sizeof(header.signature))) { + pr_warn("coreboot_table: coreboot table missing or corrupt!\n"); + return -ENODEV; + } + + ptr_entry = (void *)ptr_header + header.header_bytes; + + for (i = 0; i < header.table_entries; i++) { + memcpy_fromio(&entry, ptr_entry, sizeof(entry)); + if (entry.tag == tag) { + if (data_size < entry.size) + return -EINVAL; + + memcpy_fromio(data, ptr_entry, entry.size); + + return 0; + } + + ptr_entry += entry.size; + } + + return -ENOENT; +} +EXPORT_SYMBOL(coreboot_table_find); + +int coreboot_table_init(void __iomem *ptr) +{ + ptr_header = ptr; + + return 0; +} +EXPORT_SYMBOL(coreboot_table_init); + +int coreboot_table_exit(void) +{ + if (ptr_header) + iounmap(ptr_header); + + return 0; +} +EXPORT_SYMBOL(coreboot_table_exit); + +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/coreboot_table.h b/drivers/firmware/google/coreboot_table.h new file mode 100644 index 000000000000..6eff1ae0c5d3 --- /dev/null +++ b/drivers/firmware/google/coreboot_table.h @@ -0,0 +1,50 @@ +/* + * coreboot_table.h + * + * Internal header for coreboot table access. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __COREBOOT_TABLE_H +#define __COREBOOT_TABLE_H + +#include <linux/io.h> + +/* List of coreboot entry structures that is used */ +struct lb_cbmem_ref { + uint32_t tag; + uint32_t size; + + uint64_t cbmem_addr; +}; + +/* Coreboot table header structure */ +struct coreboot_table_header { + char signature[4]; + u32 header_bytes; + u32 header_checksum; + u32 table_bytes; + u32 table_checksum; + u32 table_entries; +}; + +/* Retrieve coreboot table entry with tag *tag* and copy it to data */ +int coreboot_table_find(int tag, void *data, size_t data_size); + +/* Initialize coreboot table module given a pointer to iomem */ +int coreboot_table_init(void __iomem *ptr); + +/* Cleanup coreboot table module */ +int coreboot_table_exit(void); + +#endif /* __COREBOOT_TABLE_H */ diff --git a/drivers/firmware/google/memconsole-coreboot.c b/drivers/firmware/google/memconsole-coreboot.c new file mode 100644 index 000000000000..02711114dece --- /dev/null +++ b/drivers/firmware/google/memconsole-coreboot.c @@ -0,0 +1,109 @@ +/* + * memconsole-coreboot.c + * + * Memory based BIOS console accessed through coreboot table. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "memconsole.h" +#include "coreboot_table.h" + +#define CB_TAG_CBMEM_CONSOLE 0x17 + +/* CBMEM firmware console log descriptor. */ +struct cbmem_cons { + u32 buffer_size; + u32 buffer_cursor; + u8 buffer_body[0]; +} __packed; + +static struct cbmem_cons __iomem *cbmem_console; + +static int memconsole_coreboot_init(phys_addr_t physaddr) +{ + struct cbmem_cons __iomem *tmp_cbmc; + + tmp_cbmc = memremap(physaddr, sizeof(*tmp_cbmc), MEMREMAP_WB); + + if (!tmp_cbmc) + return -ENOMEM; + + cbmem_console = memremap(physaddr, + tmp_cbmc->buffer_size + sizeof(*cbmem_console), + MEMREMAP_WB); + memunmap(tmp_cbmc); + + if (!cbmem_console) + return -ENOMEM; + + memconsole_setup(cbmem_console->buffer_body, + min(cbmem_console->buffer_cursor, cbmem_console->buffer_size)); + + return 0; +} + +static int memconsole_probe(struct platform_device *pdev) +{ + int ret; + struct lb_cbmem_ref entry; + + ret = coreboot_table_find(CB_TAG_CBMEM_CONSOLE, &entry, sizeof(entry)); + if (ret) + return ret; + + ret = memconsole_coreboot_init(entry.cbmem_addr); + if (ret) + return ret; + + return memconsole_sysfs_init(); +} + +static int memconsole_remove(struct platform_device *pdev) +{ + memconsole_exit(); + + if (cbmem_console) + memunmap(cbmem_console); + + return 0; +} + +static struct platform_driver memconsole_driver = { + .probe = memconsole_probe, + .remove = memconsole_remove, + .driver = { + .name = "memconsole", + }, +}; + +static int __init platform_memconsole_init(void) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("memconsole", -1, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + platform_driver_register(&memconsole_driver); + + return 0; +} + +module_init(platform_memconsole_init); + +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/memconsole-x86-legacy.c b/drivers/firmware/google/memconsole-x86-legacy.c new file mode 100644 index 000000000000..1f279ee883b9 --- /dev/null +++ b/drivers/firmware/google/memconsole-x86-legacy.c @@ -0,0 +1,153 @@ +/* + * memconsole-x86-legacy.c + * + * EBDA specific parts of the memory based BIOS console. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/dmi.h> +#include <linux/mm.h> +#include <asm/bios_ebda.h> +#include <linux/acpi.h> + +#include "memconsole.h" + +#define BIOS_MEMCONSOLE_V1_MAGIC 0xDEADBABE +#define BIOS_MEMCONSOLE_V2_MAGIC (('M')|('C'<<8)|('O'<<16)|('N'<<24)) + +struct biosmemcon_ebda { + u32 signature; + union { + struct { + u8 enabled; + u32 buffer_addr; + u16 start; + u16 end; + u16 num_chars; + u8 wrapped; + } __packed v1; + struct { + u32 buffer_addr; + /* Misdocumented as number of pages! */ + u16 num_bytes; + u16 start; + u16 end; + } __packed v2; + }; +} __packed; + +static void found_v1_header(struct biosmemcon_ebda *hdr) +{ + pr_info("memconsole: BIOS console v1 EBDA structure found at %p\n", + hdr); + pr_info("memconsole: BIOS console buffer at 0x%.8x, start = %d, end = %d, num = %d\n", + hdr->v1.buffer_addr, hdr->v1.start, + hdr->v1.end, hdr->v1.num_chars); + + memconsole_setup(phys_to_virt(hdr->v1.buffer_addr), hdr->v1.num_chars); +} + +static void found_v2_header(struct biosmemcon_ebda *hdr) +{ + pr_info("memconsole: BIOS console v2 EBDA structure found at %p\n", + hdr); + pr_info("memconsole: BIOS console buffer at 0x%.8x, start = %d, end = %d, num_bytes = %d\n", + hdr->v2.buffer_addr, hdr->v2.start, + hdr->v2.end, hdr->v2.num_bytes); + + memconsole_setup(phys_to_virt(hdr->v2.buffer_addr + hdr->v2.start), + hdr->v2.end - hdr->v2.start); +} + +/* + * Search through the EBDA for the BIOS Memory Console, and + * set the global variables to point to it. Return true if found. + */ +static bool memconsole_ebda_init(void) +{ + unsigned int address; + size_t length, cur; + + address = get_bios_ebda(); + if (!address) { + pr_info("memconsole: BIOS EBDA non-existent.\n"); + return false; + } + + /* EBDA length is byte 0 of EBDA (in KB) */ + length = *(u8 *)phys_to_virt(address); + length <<= 10; /* convert to bytes */ + + /* + * Search through EBDA for BIOS memory console structure + * note: signature is not necessarily dword-aligned + */ + for (cur = 0; cur < length; cur++) { + struct biosmemcon_ebda *hdr = phys_to_virt(address + cur); + + /* memconsole v1 */ + if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) { + found_v1_header(hdr); + return true; + } + + /* memconsole v2 */ + if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) { + found_v2_header(hdr); + return true; + } + } + + pr_info("memconsole: BIOS console EBDA structure not found!\n"); + return false; +} + +static struct dmi_system_id memconsole_dmi_table[] __initdata = { + { + .ident = "Google Board", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."), + }, + }, + {} +}; +MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table); + +static bool __init memconsole_find(void) +{ + if (!dmi_check_system(memconsole_dmi_table)) + return false; + + return memconsole_ebda_init(); +} + +static int __init memconsole_x86_init(void) +{ + if (!memconsole_find()) + return -ENODEV; + + return memconsole_sysfs_init(); +} + +static void __exit memconsole_x86_exit(void) +{ + memconsole_exit(); +} + +module_init(memconsole_x86_init); +module_exit(memconsole_x86_exit); + +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/memconsole.c b/drivers/firmware/google/memconsole.c index 2f569aaed4c7..94e200ddb4fa 100644 --- a/drivers/firmware/google/memconsole.c +++ b/drivers/firmware/google/memconsole.c @@ -1,66 +1,36 @@ /* * memconsole.c * - * Infrastructure for importing the BIOS memory based console - * into the kernel log ringbuffer. + * Architecture-independent parts of the memory based BIOS console. * - * Copyright 2010 Google Inc. All rights reserved. + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ -#include <linux/ctype.h> #include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> #include <linux/sysfs.h> #include <linux/kobject.h> #include <linux/module.h> -#include <linux/dmi.h> -#include <linux/io.h> -#include <asm/bios_ebda.h> -#define BIOS_MEMCONSOLE_V1_MAGIC 0xDEADBABE -#define BIOS_MEMCONSOLE_V2_MAGIC (('M')|('C'<<8)|('O'<<16)|('N'<<24)) +#include "memconsole.h" -struct biosmemcon_ebda { - u32 signature; - union { - struct { - u8 enabled; - u32 buffer_addr; - u16 start; - u16 end; - u16 num_chars; - u8 wrapped; - } __packed v1; - struct { - u32 buffer_addr; - /* Misdocumented as number of pages! */ - u16 num_bytes; - u16 start; - u16 end; - } __packed v2; - }; -} __packed; - -static u32 memconsole_baseaddr; +static char *memconsole_baseaddr; static size_t memconsole_length; static ssize_t memconsole_read(struct file *filp, struct kobject *kobp, struct bin_attribute *bin_attr, char *buf, loff_t pos, size_t count) { - char *memconsole; - ssize_t ret; - - memconsole = ioremap_cache(memconsole_baseaddr, memconsole_length); - if (!memconsole) { - pr_err("memconsole: ioremap_cache failed\n"); - return -ENOMEM; - } - ret = memory_read_from_buffer(buf, count, &pos, memconsole, - memconsole_length); - iounmap(memconsole); - return ret; + return memory_read_from_buffer(buf, count, &pos, memconsole_baseaddr, + memconsole_length); } static struct bin_attribute memconsole_bin_attr = { @@ -68,104 +38,25 @@ static struct bin_attribute memconsole_bin_attr = { .read = memconsole_read, }; - -static void __init found_v1_header(struct biosmemcon_ebda *hdr) -{ - pr_info("BIOS console v1 EBDA structure found at %p\n", hdr); - pr_info("BIOS console buffer at 0x%.8x, " - "start = %d, end = %d, num = %d\n", - hdr->v1.buffer_addr, hdr->v1.start, - hdr->v1.end, hdr->v1.num_chars); - - memconsole_length = hdr->v1.num_chars; - memconsole_baseaddr = hdr->v1.buffer_addr; -} - -static void __init found_v2_header(struct biosmemcon_ebda *hdr) -{ - pr_info("BIOS console v2 EBDA structure found at %p\n", hdr); - pr_info("BIOS console buffer at 0x%.8x, " - "start = %d, end = %d, num_bytes = %d\n", - hdr->v2.buffer_addr, hdr->v2.start, - hdr->v2.end, hdr->v2.num_bytes); - - memconsole_length = hdr->v2.end - hdr->v2.start; - memconsole_baseaddr = hdr->v2.buffer_addr + hdr->v2.start; -} - -/* - * Search through the EBDA for the BIOS Memory Console, and - * set the global variables to point to it. Return true if found. - */ -static bool __init found_memconsole(void) +void memconsole_setup(void *baseaddr, size_t length) { - unsigned int address; - size_t length, cur; - - address = get_bios_ebda(); - if (!address) { - pr_info("BIOS EBDA non-existent.\n"); - return false; - } - - /* EBDA length is byte 0 of EBDA (in KB) */ - length = *(u8 *)phys_to_virt(address); - length <<= 10; /* convert to bytes */ - - /* - * Search through EBDA for BIOS memory console structure - * note: signature is not necessarily dword-aligned - */ - for (cur = 0; cur < length; cur++) { - struct biosmemcon_ebda *hdr = phys_to_virt(address + cur); - - /* memconsole v1 */ - if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) { - found_v1_header(hdr); - return true; - } - - /* memconsole v2 */ - if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) { - found_v2_header(hdr); - return true; - } - } - - pr_info("BIOS console EBDA structure not found!\n"); - return false; + memconsole_baseaddr = baseaddr; + memconsole_length = length; } +EXPORT_SYMBOL(memconsole_setup); -static struct dmi_system_id memconsole_dmi_table[] __initdata = { - { - .ident = "Google Board", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."), - }, - }, - {} -}; -MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table); - -static int __init memconsole_init(void) +int memconsole_sysfs_init(void) { - if (!dmi_check_system(memconsole_dmi_table)) - return -ENODEV; - - if (!found_memconsole()) - return -ENODEV; - memconsole_bin_attr.size = memconsole_length; return sysfs_create_bin_file(firmware_kobj, &memconsole_bin_attr); } +EXPORT_SYMBOL(memconsole_sysfs_init); -static void __exit memconsole_exit(void) +void memconsole_exit(void) { sysfs_remove_bin_file(firmware_kobj, &memconsole_bin_attr); } - -module_init(memconsole_init); -module_exit(memconsole_exit); +EXPORT_SYMBOL(memconsole_exit); MODULE_AUTHOR("Google, Inc."); MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/memconsole.h b/drivers/firmware/google/memconsole.h new file mode 100644 index 000000000000..190fc03a51ae --- /dev/null +++ b/drivers/firmware/google/memconsole.h @@ -0,0 +1,43 @@ +/* + * memconsole.h + * + * Internal headers of the memory based BIOS console. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __FIRMWARE_GOOGLE_MEMCONSOLE_H +#define __FIRMWARE_GOOGLE_MEMCONSOLE_H + +/* + * memconsole_setup + * + * Initialize the memory console from raw (virtual) base + * address and length. + */ +void memconsole_setup(void *baseaddr, size_t length); + +/* + * memconsole_sysfs_init + * + * Update memory console length and create binary file + * for firmware object. + */ +int memconsole_sysfs_init(void); + +/* memconsole_exit + * + * Unmap the console buffer. + */ +void memconsole_exit(void); + +#endif /* __FIRMWARE_GOOGLE_MEMCONSOLE_H */ diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c new file mode 100644 index 000000000000..3ce813110d5e --- /dev/null +++ b/drivers/firmware/google/vpd.c @@ -0,0 +1,332 @@ +/* + * vpd.c + * + * Driver for exporting VPD content to sysfs. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/kobject.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +#include "coreboot_table.h" +#include "vpd_decode.h" + +#define CB_TAG_VPD 0x2c +#define VPD_CBMEM_MAGIC 0x43524f53 + +static struct kobject *vpd_kobj; + +struct vpd_cbmem { + u32 magic; + u32 version; + u32 ro_size; + u32 rw_size; + u8 blob[0]; +}; + +struct vpd_section { + bool enabled; + const char *name; + char *raw_name; /* the string name_raw */ + struct kobject *kobj; /* vpd/name directory */ + char *baseaddr; + struct bin_attribute bin_attr; /* vpd/name_raw bin_attribute */ + struct list_head attribs; /* key/value in vpd_attrib_info list */ +}; + +struct vpd_attrib_info { + char *key; + const char *value; + struct bin_attribute bin_attr; + struct list_head list; +}; + +static struct vpd_section ro_vpd; +static struct vpd_section rw_vpd; + +static ssize_t vpd_attrib_read(struct file *filp, struct kobject *kobp, + struct bin_attribute *bin_attr, char *buf, + loff_t pos, size_t count) +{ + struct vpd_attrib_info *info = bin_attr->private; + + return memory_read_from_buffer(buf, count, &pos, info->value, + info->bin_attr.size); +} + +/* + * vpd_section_check_key_name() + * + * The VPD specification supports only [a-zA-Z0-9_]+ characters in key names but + * old firmware versions may have entries like "S/N" which are problematic when + * exporting them as sysfs attributes. These keys present in old firmwares are + * ignored. + * + * Returns VPD_OK for a valid key name, VPD_FAIL otherwise. + * + * @key: The key name to check + * @key_len: key name length + */ +static int vpd_section_check_key_name(const u8 *key, s32 key_len) +{ + int c; + + while (key_len-- > 0) { + c = *key++; + + if (!isalnum(c) && c != '_') + return VPD_FAIL; + } + + return VPD_OK; +} + +static int vpd_section_attrib_add(const u8 *key, s32 key_len, + const u8 *value, s32 value_len, + void *arg) +{ + int ret; + struct vpd_section *sec = arg; + struct vpd_attrib_info *info; + + /* + * Return VPD_OK immediately to decode next entry if the current key + * name contains invalid characters. + */ + if (vpd_section_check_key_name(key, key_len) != VPD_OK) + return VPD_OK; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + info->key = kzalloc(key_len + 1, GFP_KERNEL); + if (!info->key) + return -ENOMEM; + + memcpy(info->key, key, key_len); + + sysfs_bin_attr_init(&info->bin_attr); + info->bin_attr.attr.name = info->key; + info->bin_attr.attr.mode = 0444; + info->bin_attr.size = value_len; + info->bin_attr.read = vpd_attrib_read; + info->bin_attr.private = info; + + info->value = value; + + INIT_LIST_HEAD(&info->list); + list_add_tail(&info->list, &sec->attribs); + + ret = sysfs_create_bin_file(sec->kobj, &info->bin_attr); + if (ret) { + kfree(info->key); + return ret; + } + + return 0; +} + +static void vpd_section_attrib_destroy(struct vpd_section *sec) +{ + struct vpd_attrib_info *info; + struct vpd_attrib_info *temp; + + list_for_each_entry_safe(info, temp, &sec->attribs, list) { + kfree(info->key); + sysfs_remove_bin_file(sec->kobj, &info->bin_attr); + kfree(info); + } +} + +static ssize_t vpd_section_read(struct file *filp, struct kobject *kobp, + struct bin_attribute *bin_attr, char *buf, + loff_t pos, size_t count) +{ + struct vpd_section *sec = bin_attr->private; + + return memory_read_from_buffer(buf, count, &pos, sec->baseaddr, + sec->bin_attr.size); +} + +static int vpd_section_create_attribs(struct vpd_section *sec) +{ + s32 consumed; + int ret; + + consumed = 0; + do { + ret = vpd_decode_string(sec->bin_attr.size, sec->baseaddr, + &consumed, vpd_section_attrib_add, sec); + } while (ret == VPD_OK); + + return 0; +} + +static int vpd_section_init(const char *name, struct vpd_section *sec, + phys_addr_t physaddr, size_t size) +{ + int ret; + int raw_len; + + sec->baseaddr = memremap(physaddr, size, MEMREMAP_WB); + if (!sec->baseaddr) + return -ENOMEM; + + sec->name = name; + + /* We want to export the raw partion with name ${name}_raw */ + raw_len = strlen(name) + 5; + sec->raw_name = kzalloc(raw_len, GFP_KERNEL); + strncpy(sec->raw_name, name, raw_len); + strncat(sec->raw_name, "_raw", raw_len); + + sysfs_bin_attr_init(&sec->bin_attr); + sec->bin_attr.attr.name = sec->raw_name; + sec->bin_attr.attr.mode = 0444; + sec->bin_attr.size = size; + sec->bin_attr.read = vpd_section_read; + sec->bin_attr.private = sec; + + ret = sysfs_create_bin_file(vpd_kobj, &sec->bin_attr); + if (ret) + goto free_sec; + + sec->kobj = kobject_create_and_add(name, vpd_kobj); + if (!sec->kobj) { + ret = -EINVAL; + goto sysfs_remove; + } + + INIT_LIST_HEAD(&sec->attribs); + vpd_section_create_attribs(sec); + + sec->enabled = true; + + return 0; + +sysfs_remove: + sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr); + +free_sec: + kfree(sec->raw_name); + iounmap(sec->baseaddr); + + return ret; +} + +static int vpd_section_destroy(struct vpd_section *sec) +{ + if (sec->enabled) { + vpd_section_attrib_destroy(sec); + kobject_del(sec->kobj); + sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr); + kfree(sec->raw_name); + iounmap(sec->baseaddr); + } + + return 0; +} + +static int vpd_sections_init(phys_addr_t physaddr) +{ + struct vpd_cbmem __iomem *temp; + struct vpd_cbmem header; + int ret = 0; + + temp = memremap(physaddr, sizeof(struct vpd_cbmem), MEMREMAP_WB); + if (!temp) + return -ENOMEM; + + memcpy_fromio(&header, temp, sizeof(struct vpd_cbmem)); + iounmap(temp); + + if (header.magic != VPD_CBMEM_MAGIC) + return -ENODEV; + + if (header.ro_size) { + ret = vpd_section_init("ro", &ro_vpd, + physaddr + sizeof(struct vpd_cbmem), + header.ro_size); + if (ret) + return ret; + } + + if (header.rw_size) { + ret = vpd_section_init("rw", &rw_vpd, + physaddr + sizeof(struct vpd_cbmem) + + header.ro_size, header.rw_size); + if (ret) + return ret; + } + + return 0; +} + +static int vpd_probe(struct platform_device *pdev) +{ + int ret; + struct lb_cbmem_ref entry; + + ret = coreboot_table_find(CB_TAG_VPD, &entry, sizeof(entry)); + if (ret) + return ret; + + return vpd_sections_init(entry.cbmem_addr); +} + +static struct platform_driver vpd_driver = { + .probe = vpd_probe, + .driver = { + .name = "vpd", + }, +}; + +static int __init vpd_platform_init(void) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("vpd", -1, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + vpd_kobj = kobject_create_and_add("vpd", firmware_kobj); + if (!vpd_kobj) + return -ENOMEM; + + memset(&ro_vpd, 0, sizeof(ro_vpd)); + memset(&rw_vpd, 0, sizeof(rw_vpd)); + + platform_driver_register(&vpd_driver); + + return 0; +} + +static void __exit vpd_platform_exit(void) +{ + vpd_section_destroy(&ro_vpd); + vpd_section_destroy(&rw_vpd); + kobject_del(vpd_kobj); +} + +module_init(vpd_platform_init); +module_exit(vpd_platform_exit); + +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/google/vpd_decode.c b/drivers/firmware/google/vpd_decode.c new file mode 100644 index 000000000000..943acaa8aa76 --- /dev/null +++ b/drivers/firmware/google/vpd_decode.c @@ -0,0 +1,99 @@ +/* + * vpd_decode.c + * + * Google VPD decoding routines. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/export.h> + +#include "vpd_decode.h" + +static int vpd_decode_len(const s32 max_len, const u8 *in, + s32 *length, s32 *decoded_len) +{ + u8 more; + int i = 0; + + if (!length || !decoded_len) + return VPD_FAIL; + + *length = 0; + do { + if (i >= max_len) + return VPD_FAIL; + + more = in[i] & 0x80; + *length <<= 7; + *length |= in[i] & 0x7f; + ++i; + } while (more); + + *decoded_len = i; + + return VPD_OK; +} + +int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed, + vpd_decode_callback callback, void *callback_arg) +{ + int type; + int res; + s32 key_len; + s32 value_len; + s32 decoded_len; + const u8 *key; + const u8 *value; + + /* type */ + if (*consumed >= max_len) + return VPD_FAIL; + + type = input_buf[*consumed]; + + switch (type) { + case VPD_TYPE_INFO: + case VPD_TYPE_STRING: + (*consumed)++; + + /* key */ + res = vpd_decode_len(max_len - *consumed, &input_buf[*consumed], + &key_len, &decoded_len); + if (res != VPD_OK || *consumed + decoded_len >= max_len) + return VPD_FAIL; + + *consumed += decoded_len; + key = &input_buf[*consumed]; + *consumed += key_len; + + /* value */ + res = vpd_decode_len(max_len - *consumed, &input_buf[*consumed], + &value_len, &decoded_len); + if (res != VPD_OK || *consumed + decoded_len > max_len) + return VPD_FAIL; + + *consumed += decoded_len; + value = &input_buf[*consumed]; + *consumed += value_len; + + if (type == VPD_TYPE_STRING) + return callback(key, key_len, value, value_len, + callback_arg); + break; + + default: + return VPD_FAIL; + } + + return VPD_OK; +} diff --git a/drivers/firmware/google/vpd_decode.h b/drivers/firmware/google/vpd_decode.h new file mode 100644 index 000000000000..be3d62c5ca2f --- /dev/null +++ b/drivers/firmware/google/vpd_decode.h @@ -0,0 +1,58 @@ +/* + * vpd_decode.h + * + * Google VPD decoding routines. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __VPD_DECODE_H +#define __VPD_DECODE_H + +#include <linux/types.h> + +enum { + VPD_OK = 0, + VPD_FAIL, +}; + +enum { + VPD_TYPE_TERMINATOR = 0, + VPD_TYPE_STRING, + VPD_TYPE_INFO = 0xfe, + VPD_TYPE_IMPLICIT_TERMINATOR = 0xff, +}; + +/* Callback for vpd_decode_string to invoke. */ +typedef int vpd_decode_callback(const u8 *key, s32 key_len, + const u8 *value, s32 value_len, + void *arg); + +/* + * vpd_decode_string + * + * Given the encoded string, this function invokes callback with extracted + * (key, value). The *consumed will be plused the number of bytes consumed in + * this function. + * + * The input_buf points to the first byte of the input buffer. + * + * The *consumed starts from 0, which is actually the next byte to be decoded. + * It can be non-zero to be used in multiple calls. + * + * If one entry is successfully decoded, sends it to callback and returns the + * result. + */ +int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed, + vpd_decode_callback callback, void *callback_arg); + +#endif /* __VPD_DECODE_H */ diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index ce861a2853a4..161ba9dccede 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -20,6 +20,12 @@ config FPGA_REGION FPGA Regions allow loading FPGA images under control of the Device Tree. +config FPGA_MGR_ICE40_SPI + tristate "Lattice iCE40 SPI" + depends on OF && SPI + help + FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + config FPGA_MGR_SOCFPGA tristate "Altera SOCFPGA FPGA Manager" depends on ARCH_SOCFPGA || COMPILE_TEST @@ -33,6 +39,20 @@ config FPGA_MGR_SOCFPGA_A10 help FPGA manager driver support for Altera Arria10 SoCFPGA. +config FPGA_MGR_TS73XX + tristate "Technologic Systems TS-73xx SBC FPGA Manager" + depends on ARCH_EP93XX && MACH_TS72XX + help + FPGA manager driver support for the Altera Cyclone II FPGA + present on the TS-73xx SBC boards. + +config FPGA_MGR_XILINX_SPI + tristate "Xilinx Configuration over Slave Serial (SPI)" + depends on SPI + help + FPGA manager driver support for Xilinx FPGA configuration + over slave serial interface. + config FPGA_MGR_ZYNQ_FPGA tristate "Xilinx Zynq FPGA" depends on ARCH_ZYNQ || COMPILE_TEST @@ -63,6 +83,28 @@ config ALTERA_FREEZE_BRIDGE isolate one region of the FPGA from the busses while that region is being reprogrammed. +config ALTERA_PR_IP_CORE + tristate "Altera Partial Reconfiguration IP Core" + help + Core driver support for Altera Partial Reconfiguration IP component + +config ALTERA_PR_IP_CORE_PLAT + tristate "Platform support of Altera Partial Reconfiguration IP Core" + depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM + help + Platform driver support for Altera Partial Reconfiguration IP + component + +config XILINX_PR_DECOUPLER + tristate "Xilinx LogiCORE PR Decoupler" + depends on FPGA_BRIDGE + depends on HAS_IOMEM + help + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler. + The PR Decoupler exists in the FPGA fabric to isolate one + region of the FPGA from the busses while that region is + being reprogrammed during partial reconfig. + endif # FPGA endmenu diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 8df07bcf42a6..2a4f0218145c 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -6,14 +6,20 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Manager Drivers +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o +obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o +obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o +obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o # FPGA Bridge Drivers obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o diff --git a/drivers/fpga/altera-freeze-bridge.c b/drivers/fpga/altera-freeze-bridge.c index 8dcd9fb22cb9..6159cfcf78a2 100644 --- a/drivers/fpga/altera-freeze-bridge.c +++ b/drivers/fpga/altera-freeze-bridge.c @@ -28,6 +28,7 @@ #define FREEZE_CSR_REG_VERSION 12 #define FREEZE_CSR_SUPPORTED_VERSION 2 +#define FREEZE_CSR_OFFICIAL_VERSION 0xad000003 #define FREEZE_CSR_STATUS_FREEZE_REQ_DONE BIT(0) #define FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE BIT(1) @@ -203,7 +204,7 @@ static int altera_freeze_br_enable_show(struct fpga_bridge *bridge) return priv->enable; } -static struct fpga_bridge_ops altera_freeze_br_br_ops = { +static const struct fpga_bridge_ops altera_freeze_br_br_ops = { .enable_set = altera_freeze_br_enable_set, .enable_show = altera_freeze_br_enable_show, }; @@ -218,6 +219,7 @@ static int altera_freeze_br_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = pdev->dev.of_node; + void __iomem *base_addr; struct altera_freeze_br_data *priv; struct resource *res; u32 status, revision; @@ -225,26 +227,32 @@ static int altera_freeze_br_probe(struct platform_device *pdev) if (!np) return -ENODEV; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(base_addr)) + return PTR_ERR(base_addr); + + revision = readl(base_addr + FREEZE_CSR_REG_VERSION); + if ((revision != FREEZE_CSR_SUPPORTED_VERSION) && + (revision != FREEZE_CSR_OFFICIAL_VERSION)) { + dev_err(dev, + "%s unexpected revision 0x%x != 0x%x != 0x%x\n", + __func__, revision, FREEZE_CSR_SUPPORTED_VERSION, + FREEZE_CSR_OFFICIAL_VERSION); + return -EINVAL; + } + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->dev = dev; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->base_addr = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->base_addr)) - return PTR_ERR(priv->base_addr); - - status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET); + status = readl(base_addr + FREEZE_CSR_STATUS_OFFSET); if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) priv->enable = 1; - revision = readl(priv->base_addr + FREEZE_CSR_REG_VERSION); - if (revision != FREEZE_CSR_SUPPORTED_VERSION) - dev_warn(dev, - "%s Freeze Controller unexpected revision %d != %d\n", - __func__, revision, FREEZE_CSR_SUPPORTED_VERSION); + priv->base_addr = base_addr; return fpga_bridge_register(dev, FREEZE_BRIDGE_NAME, &altera_freeze_br_br_ops, priv); diff --git a/drivers/fpga/altera-hps2fpga.c b/drivers/fpga/altera-hps2fpga.c index 4b354c79be31..3066b805f2d0 100644 --- a/drivers/fpga/altera-hps2fpga.c +++ b/drivers/fpga/altera-hps2fpga.c @@ -181,15 +181,18 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev) (enable ? "enabling" : "disabling")); ret = _alt_hps2fpga_enable_set(priv, enable); - if (ret) { - fpga_bridge_unregister(&pdev->dev); - return ret; - } + if (ret) + goto err; } } - return fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops, - priv); + ret = fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops, + priv); +err: + if (ret) + clk_disable_unprepare(priv->clk); + + return ret; } static int alt_fpga_bridge_remove(struct platform_device *pdev) diff --git a/drivers/fpga/altera-pr-ip-core-plat.c b/drivers/fpga/altera-pr-ip-core-plat.c new file mode 100644 index 000000000000..8fb36b8b4648 --- /dev/null +++ b/drivers/fpga/altera-pr-ip-core-plat.c @@ -0,0 +1,68 @@ +/* + * Driver for Altera Partial Reconfiguration IP Core + * + * Copyright (C) 2016-2017 Intel Corporation + * + * Based on socfpga-a10.c Copyright (C) 2015-2016 Altera Corporation + * by Alan Tull <atull@opensource.altera.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/fpga/altera-pr-ip-core.h> +#include <linux/module.h> +#include <linux/of_device.h> + +static int alt_pr_platform_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *reg_base; + struct resource *res; + + /* First mmio base is for register access */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + reg_base = devm_ioremap_resource(dev, res); + + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + return alt_pr_register(dev, reg_base); +} + +static int alt_pr_platform_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + return alt_pr_unregister(dev); +} + +static const struct of_device_id alt_pr_of_match[] = { + { .compatible = "altr,a10-pr-ip", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, alt_pr_of_match); + +static struct platform_driver alt_pr_platform_driver = { + .probe = alt_pr_platform_probe, + .remove = alt_pr_platform_remove, + .driver = { + .name = "alt_a10_pr_ip", + .of_match_table = alt_pr_of_match, + }, +}; + +module_platform_driver(alt_pr_platform_driver); +MODULE_AUTHOR("Matthew Gerlach <matthew.gerlach@linux.intel.com>"); +MODULE_DESCRIPTION("Altera Partial Reconfiguration IP Platform Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/altera-pr-ip-core.c b/drivers/fpga/altera-pr-ip-core.c new file mode 100644 index 000000000000..a7b31f9797ce --- /dev/null +++ b/drivers/fpga/altera-pr-ip-core.c @@ -0,0 +1,220 @@ +/* + * Driver for Altera Partial Reconfiguration IP Core + * + * Copyright (C) 2016-2017 Intel Corporation + * + * Based on socfpga-a10.c Copyright (C) 2015-2016 Altera Corporation + * by Alan Tull <atull@opensource.altera.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/delay.h> +#include <linux/fpga/altera-pr-ip-core.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/module.h> + +#define ALT_PR_DATA_OFST 0x00 +#define ALT_PR_CSR_OFST 0x04 + +#define ALT_PR_CSR_PR_START BIT(0) +#define ALT_PR_CSR_STATUS_SFT 2 +#define ALT_PR_CSR_STATUS_MSK (7 << ALT_PR_CSR_STATUS_SFT) +#define ALT_PR_CSR_STATUS_NRESET (0 << ALT_PR_CSR_STATUS_SFT) +#define ALT_PR_CSR_STATUS_PR_ERR (1 << ALT_PR_CSR_STATUS_SFT) +#define ALT_PR_CSR_STATUS_CRC_ERR (2 << ALT_PR_CSR_STATUS_SFT) +#define ALT_PR_CSR_STATUS_BAD_BITS (3 << ALT_PR_CSR_STATUS_SFT) +#define ALT_PR_CSR_STATUS_PR_IN_PROG (4 << ALT_PR_CSR_STATUS_SFT) +#define ALT_PR_CSR_STATUS_PR_SUCCESS (5 << ALT_PR_CSR_STATUS_SFT) + +struct alt_pr_priv { + void __iomem *reg_base; +}; + +static enum fpga_mgr_states alt_pr_fpga_state(struct fpga_manager *mgr) +{ + struct alt_pr_priv *priv = mgr->priv; + const char *err = "unknown"; + enum fpga_mgr_states ret = FPGA_MGR_STATE_UNKNOWN; + u32 val; + + val = readl(priv->reg_base + ALT_PR_CSR_OFST); + + val &= ALT_PR_CSR_STATUS_MSK; + + switch (val) { + case ALT_PR_CSR_STATUS_NRESET: + return FPGA_MGR_STATE_RESET; + + case ALT_PR_CSR_STATUS_PR_ERR: + err = "pr error"; + ret = FPGA_MGR_STATE_WRITE_ERR; + break; + + case ALT_PR_CSR_STATUS_CRC_ERR: + err = "crc error"; + ret = FPGA_MGR_STATE_WRITE_ERR; + break; + + case ALT_PR_CSR_STATUS_BAD_BITS: + err = "bad bits"; + ret = FPGA_MGR_STATE_WRITE_ERR; + break; + + case ALT_PR_CSR_STATUS_PR_IN_PROG: + return FPGA_MGR_STATE_WRITE; + + case ALT_PR_CSR_STATUS_PR_SUCCESS: + return FPGA_MGR_STATE_OPERATING; + + default: + break; + } + + dev_err(&mgr->dev, "encountered error code %d (%s) in %s()\n", + val, err, __func__); + return ret; +} + +static int alt_pr_fpga_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct alt_pr_priv *priv = mgr->priv; + u32 val; + + if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { + dev_err(&mgr->dev, "%s Partial Reconfiguration flag not set\n", + __func__); + return -EINVAL; + } + + val = readl(priv->reg_base + ALT_PR_CSR_OFST); + + if (val & ALT_PR_CSR_PR_START) { + dev_err(&mgr->dev, + "%s Partial Reconfiguration already started\n", + __func__); + return -EINVAL; + } + + writel(val | ALT_PR_CSR_PR_START, priv->reg_base + ALT_PR_CSR_OFST); + + return 0; +} + +static int alt_pr_fpga_write(struct fpga_manager *mgr, const char *buf, + size_t count) +{ + struct alt_pr_priv *priv = mgr->priv; + u32 *buffer_32 = (u32 *)buf; + size_t i = 0; + + if (count <= 0) + return -EINVAL; + + /* Write out the complete 32-bit chunks */ + while (count >= sizeof(u32)) { + writel(buffer_32[i++], priv->reg_base); + count -= sizeof(u32); + } + + /* Write out remaining non 32-bit chunks */ + switch (count) { + case 3: + writel(buffer_32[i++] & 0x00ffffff, priv->reg_base); + break; + case 2: + writel(buffer_32[i++] & 0x0000ffff, priv->reg_base); + break; + case 1: + writel(buffer_32[i++] & 0x000000ff, priv->reg_base); + break; + case 0: + break; + default: + /* This will never happen */ + return -EFAULT; + } + + if (alt_pr_fpga_state(mgr) == FPGA_MGR_STATE_WRITE_ERR) + return -EIO; + + return 0; +} + +static int alt_pr_fpga_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + u32 i = 0; + + do { + switch (alt_pr_fpga_state(mgr)) { + case FPGA_MGR_STATE_WRITE_ERR: + return -EIO; + + case FPGA_MGR_STATE_OPERATING: + dev_info(&mgr->dev, + "successful partial reconfiguration\n"); + return 0; + + default: + break; + } + udelay(1); + } while (info->config_complete_timeout_us > i++); + + dev_err(&mgr->dev, "timed out waiting for write to complete\n"); + return -ETIMEDOUT; +} + +static const struct fpga_manager_ops alt_pr_ops = { + .state = alt_pr_fpga_state, + .write_init = alt_pr_fpga_write_init, + .write = alt_pr_fpga_write, + .write_complete = alt_pr_fpga_write_complete, +}; + +int alt_pr_register(struct device *dev, void __iomem *reg_base) +{ + struct alt_pr_priv *priv; + u32 val; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reg_base = reg_base; + + val = readl(priv->reg_base + ALT_PR_CSR_OFST); + + dev_dbg(dev, "%s status=%d start=%d\n", __func__, + (val & ALT_PR_CSR_STATUS_MSK) >> ALT_PR_CSR_STATUS_SFT, + (int)(val & ALT_PR_CSR_PR_START)); + + return fpga_mgr_register(dev, dev_name(dev), &alt_pr_ops, priv); +} +EXPORT_SYMBOL_GPL(alt_pr_register); + +int alt_pr_unregister(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + fpga_mgr_unregister(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(alt_pr_unregister); + +MODULE_AUTHOR("Matthew Gerlach <matthew.gerlach@linux.intel.com>"); +MODULE_DESCRIPTION("Altera Partial Reconfiguration IP Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c index 33ee83e6373c..9651aa56244a 100644 --- a/drivers/fpga/fpga-bridge.c +++ b/drivers/fpga/fpga-bridge.c @@ -27,7 +27,7 @@ static DEFINE_IDA(fpga_bridge_ida); static struct class *fpga_bridge_class; /* Lock for adding/removing bridges to linked lists*/ -spinlock_t bridge_list_lock; +static spinlock_t bridge_list_lock; static int fpga_bridge_of_node_match(struct device *dev, const void *data) { @@ -146,11 +146,9 @@ EXPORT_SYMBOL_GPL(fpga_bridge_put); int fpga_bridges_enable(struct list_head *bridge_list) { struct fpga_bridge *bridge; - struct list_head *node; int ret; - list_for_each(node, bridge_list) { - bridge = list_entry(node, struct fpga_bridge, node); + list_for_each_entry(bridge, bridge_list, node) { ret = fpga_bridge_enable(bridge); if (ret) return ret; @@ -172,11 +170,9 @@ EXPORT_SYMBOL_GPL(fpga_bridges_enable); int fpga_bridges_disable(struct list_head *bridge_list) { struct fpga_bridge *bridge; - struct list_head *node; int ret; - list_for_each(node, bridge_list) { - bridge = list_entry(node, struct fpga_bridge, node); + list_for_each_entry(bridge, bridge_list, node) { ret = fpga_bridge_disable(bridge); if (ret) return ret; @@ -196,13 +192,10 @@ EXPORT_SYMBOL_GPL(fpga_bridges_disable); */ void fpga_bridges_put(struct list_head *bridge_list) { - struct fpga_bridge *bridge; - struct list_head *node, *next; + struct fpga_bridge *bridge, *next; unsigned long flags; - list_for_each_safe(node, next, bridge_list) { - bridge = list_entry(node, struct fpga_bridge, node); - + list_for_each_entry_safe(bridge, next, bridge_list, node) { fpga_bridge_put(bridge); spin_lock_irqsave(&bridge_list_lock, flags); diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c index 86d2cb203533..188ffefa3cc3 100644 --- a/drivers/fpga/fpga-mgr.c +++ b/drivers/fpga/fpga-mgr.c @@ -361,7 +361,7 @@ static struct attribute *fpga_mgr_attrs[] = { }; ATTRIBUTE_GROUPS(fpga_mgr); -struct fpga_manager *__fpga_mgr_get(struct device *dev) +static struct fpga_manager *__fpga_mgr_get(struct device *dev) { struct fpga_manager *mgr; int ret = -ENODEV; diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c index 3222fdbad75a..3b6b2f4182a1 100644 --- a/drivers/fpga/fpga-region.c +++ b/drivers/fpga/fpga-region.c @@ -245,7 +245,8 @@ static int fpga_region_program_fpga(struct fpga_region *region, mgr = fpga_region_get_manager(region); if (IS_ERR(mgr)) { pr_err("failed to get fpga region manager\n"); - return PTR_ERR(mgr); + ret = PTR_ERR(mgr); + goto err_put_region; } ret = fpga_region_get_bridges(region, overlay); @@ -281,6 +282,7 @@ err_put_br: fpga_bridges_put(®ion->bridge_list); err_put_mgr: fpga_mgr_put(mgr); +err_put_region: fpga_region_put(region); return ret; @@ -337,8 +339,9 @@ static int child_regions_with_firmware(struct device_node *overlay) * The overlay must add either firmware-name or external-fpga-config property * to the FPGA Region. * - * firmware-name : program the FPGA - * external-fpga-config : FPGA is already programmed + * firmware-name : program the FPGA + * external-fpga-config : FPGA is already programmed + * encrypted-fpga-config : FPGA bitstream is encrypted * * The overlay can add other FPGA regions, but child FPGA regions cannot have a * firmware-name property since those regions don't exist yet. @@ -373,6 +376,9 @@ static int fpga_region_notify_pre_apply(struct fpga_region *region, if (of_property_read_bool(nd->overlay, "external-fpga-config")) info->flags |= FPGA_MGR_EXTERNAL_CONFIG; + if (of_property_read_bool(nd->overlay, "encrypted-fpga-config")) + info->flags |= FPGA_MGR_ENCRYPTED_BITSTREAM; + of_property_read_string(nd->overlay, "firmware-name", &firmware_name); of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us", @@ -381,6 +387,9 @@ static int fpga_region_notify_pre_apply(struct fpga_region *region, of_property_read_u32(nd->overlay, "region-freeze-timeout-us", &info->disable_timeout_us); + of_property_read_u32(nd->overlay, "config-complete-timeout-us", + &info->config_complete_timeout_us); + /* If FPGA was externally programmed, don't specify firmware */ if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) { pr_err("error: specified firmware and external-fpga-config"); diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c new file mode 100644 index 000000000000..7fca82023062 --- /dev/null +++ b/drivers/fpga/ice40-spi.c @@ -0,0 +1,207 @@ +/* + * FPGA Manager Driver for Lattice iCE40. + * + * Copyright (c) 2016 Joel Holdsworth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This driver adds support to the FPGA manager for configuring the SRAM of + * Lattice iCE40 FPGAs through slave SPI. + */ + +#include <linux/fpga/fpga-mgr.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/spi/spi.h> +#include <linux/stringify.h> + +#define ICE40_SPI_MAX_SPEED 25000000 /* Hz */ +#define ICE40_SPI_MIN_SPEED 1000000 /* Hz */ + +#define ICE40_SPI_RESET_DELAY 1 /* us (>200ns) */ +#define ICE40_SPI_HOUSEKEEPING_DELAY 1200 /* us */ + +#define ICE40_SPI_NUM_ACTIVATION_BYTES DIV_ROUND_UP(49, 8) + +struct ice40_fpga_priv { + struct spi_device *dev; + struct gpio_desc *reset; + struct gpio_desc *cdone; +}; + +static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr) +{ + struct ice40_fpga_priv *priv = mgr->priv; + + return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING : + FPGA_MGR_STATE_UNKNOWN; +} + +static int ice40_fpga_ops_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct ice40_fpga_priv *priv = mgr->priv; + struct spi_device *dev = priv->dev; + struct spi_message message; + struct spi_transfer assert_cs_then_reset_delay = { + .cs_change = 1, + .delay_usecs = ICE40_SPI_RESET_DELAY + }; + struct spi_transfer housekeeping_delay_then_release_cs = { + .delay_usecs = ICE40_SPI_HOUSEKEEPING_DELAY + }; + int ret; + + if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { + dev_err(&dev->dev, + "Partial reconfiguration is not supported\n"); + return -ENOTSUPP; + } + + /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */ + spi_bus_lock(dev->master); + + gpiod_set_value(priv->reset, 1); + + spi_message_init(&message); + spi_message_add_tail(&assert_cs_then_reset_delay, &message); + ret = spi_sync_locked(dev, &message); + + /* Come out of reset */ + gpiod_set_value(priv->reset, 0); + + /* Abort if the chip-select failed */ + if (ret) + goto fail; + + /* Check CDONE is de-asserted i.e. the FPGA is reset */ + if (gpiod_get_value(priv->cdone)) { + dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n"); + ret = -EIO; + goto fail; + } + + /* Wait for the housekeeping to complete, and release SS_B */ + spi_message_init(&message); + spi_message_add_tail(&housekeeping_delay_then_release_cs, &message); + ret = spi_sync_locked(dev, &message); + +fail: + spi_bus_unlock(dev->master); + + return ret; +} + +static int ice40_fpga_ops_write(struct fpga_manager *mgr, + const char *buf, size_t count) +{ + struct ice40_fpga_priv *priv = mgr->priv; + + return spi_write(priv->dev, buf, count); +} + +static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + struct ice40_fpga_priv *priv = mgr->priv; + struct spi_device *dev = priv->dev; + const u8 padding[ICE40_SPI_NUM_ACTIVATION_BYTES] = {0}; + + /* Check CDONE is asserted */ + if (!gpiod_get_value(priv->cdone)) { + dev_err(&dev->dev, + "CDONE was not asserted after firmware transfer\n"); + return -EIO; + } + + /* Send of zero-padding to activate the firmware */ + return spi_write(dev, padding, sizeof(padding)); +} + +static const struct fpga_manager_ops ice40_fpga_ops = { + .state = ice40_fpga_ops_state, + .write_init = ice40_fpga_ops_write_init, + .write = ice40_fpga_ops_write, + .write_complete = ice40_fpga_ops_write_complete, +}; + +static int ice40_fpga_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct ice40_fpga_priv *priv; + int ret; + + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = spi; + + /* Check board setup data. */ + if (spi->max_speed_hz > ICE40_SPI_MAX_SPEED) { + dev_err(dev, "SPI speed is too high, maximum speed is " + __stringify(ICE40_SPI_MAX_SPEED) "\n"); + return -EINVAL; + } + + if (spi->max_speed_hz < ICE40_SPI_MIN_SPEED) { + dev_err(dev, "SPI speed is too low, minimum speed is " + __stringify(ICE40_SPI_MIN_SPEED) "\n"); + return -EINVAL; + } + + if (spi->mode & SPI_CPHA) { + dev_err(dev, "Bad SPI mode, CPHA not supported\n"); + return -EINVAL; + } + + /* Set up the GPIOs */ + priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN); + if (IS_ERR(priv->cdone)) { + ret = PTR_ERR(priv->cdone); + dev_err(dev, "Failed to get CDONE GPIO: %d\n", ret); + return ret; + } + + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset)) { + ret = PTR_ERR(priv->reset); + dev_err(dev, "Failed to get CRESET_B GPIO: %d\n", ret); + return ret; + } + + /* Register with the FPGA manager */ + return fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager", + &ice40_fpga_ops, priv); +} + +static int ice40_fpga_remove(struct spi_device *spi) +{ + fpga_mgr_unregister(&spi->dev); + return 0; +} + +static const struct of_device_id ice40_fpga_of_match[] = { + { .compatible = "lattice,ice40-fpga-mgr", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ice40_fpga_of_match); + +static struct spi_driver ice40_fpga_driver = { + .probe = ice40_fpga_probe, + .remove = ice40_fpga_remove, + .driver = { + .name = "ice40spi", + .of_match_table = of_match_ptr(ice40_fpga_of_match), + }, +}; + +module_spi_driver(ice40_fpga_driver); + +MODULE_AUTHOR("Joel Holdsworth <joel@airwebreathe.org.uk>"); +MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/ts73xx-fpga.c b/drivers/fpga/ts73xx-fpga.c new file mode 100644 index 000000000000..f6a96b42e2ca --- /dev/null +++ b/drivers/fpga/ts73xx-fpga.c @@ -0,0 +1,156 @@ +/* + * Technologic Systems TS-73xx SBC FPGA loader + * + * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> + * + * FPGA Manager Driver for the on-board Altera Cyclone II FPGA found on + * TS-7300, heavily based on load_fpga.c in their vendor tree. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/string.h> +#include <linux/iopoll.h> +#include <linux/fpga/fpga-mgr.h> + +#define TS73XX_FPGA_DATA_REG 0 +#define TS73XX_FPGA_CONFIG_REG 1 + +#define TS73XX_FPGA_WRITE_DONE 0x1 +#define TS73XX_FPGA_WRITE_DONE_TIMEOUT 1000 /* us */ +#define TS73XX_FPGA_RESET 0x2 +#define TS73XX_FPGA_RESET_LOW_DELAY 30 /* us */ +#define TS73XX_FPGA_RESET_HIGH_DELAY 80 /* us */ +#define TS73XX_FPGA_LOAD_OK 0x4 +#define TS73XX_FPGA_CONFIG_LOAD 0x8 + +struct ts73xx_fpga_priv { + void __iomem *io_base; + struct device *dev; +}; + +static enum fpga_mgr_states ts73xx_fpga_state(struct fpga_manager *mgr) +{ + return FPGA_MGR_STATE_UNKNOWN; +} + +static int ts73xx_fpga_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct ts73xx_fpga_priv *priv = mgr->priv; + + /* Reset the FPGA */ + writeb(0, priv->io_base + TS73XX_FPGA_CONFIG_REG); + udelay(TS73XX_FPGA_RESET_LOW_DELAY); + writeb(TS73XX_FPGA_RESET, priv->io_base + TS73XX_FPGA_CONFIG_REG); + udelay(TS73XX_FPGA_RESET_HIGH_DELAY); + + return 0; +} + +static int ts73xx_fpga_write(struct fpga_manager *mgr, const char *buf, + size_t count) +{ + struct ts73xx_fpga_priv *priv = mgr->priv; + size_t i = 0; + int ret; + u8 reg; + + while (count--) { + ret = readb_poll_timeout(priv->io_base + TS73XX_FPGA_CONFIG_REG, + reg, !(reg & TS73XX_FPGA_WRITE_DONE), + 1, TS73XX_FPGA_WRITE_DONE_TIMEOUT); + if (ret < 0) + return ret; + + writeb(buf[i], priv->io_base + TS73XX_FPGA_DATA_REG); + i++; + } + + return 0; +} + +static int ts73xx_fpga_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + struct ts73xx_fpga_priv *priv = mgr->priv; + u8 reg; + + usleep_range(1000, 2000); + reg = readb(priv->io_base + TS73XX_FPGA_CONFIG_REG); + reg |= TS73XX_FPGA_CONFIG_LOAD; + writeb(reg, priv->io_base + TS73XX_FPGA_CONFIG_REG); + + usleep_range(1000, 2000); + reg = readb(priv->io_base + TS73XX_FPGA_CONFIG_REG); + reg &= ~TS73XX_FPGA_CONFIG_LOAD; + writeb(reg, priv->io_base + TS73XX_FPGA_CONFIG_REG); + + reg = readb(priv->io_base + TS73XX_FPGA_CONFIG_REG); + if ((reg & TS73XX_FPGA_LOAD_OK) != TS73XX_FPGA_LOAD_OK) + return -ETIMEDOUT; + + return 0; +} + +static const struct fpga_manager_ops ts73xx_fpga_ops = { + .state = ts73xx_fpga_state, + .write_init = ts73xx_fpga_write_init, + .write = ts73xx_fpga_write, + .write_complete = ts73xx_fpga_write_complete, +}; + +static int ts73xx_fpga_probe(struct platform_device *pdev) +{ + struct device *kdev = &pdev->dev; + struct ts73xx_fpga_priv *priv; + struct resource *res; + + priv = devm_kzalloc(kdev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = kdev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->io_base = devm_ioremap_resource(kdev, res); + if (IS_ERR(priv->io_base)) { + dev_err(kdev, "unable to remap registers\n"); + return PTR_ERR(priv->io_base); + } + + return fpga_mgr_register(kdev, "TS-73xx FPGA Manager", + &ts73xx_fpga_ops, priv); +} + +static int ts73xx_fpga_remove(struct platform_device *pdev) +{ + fpga_mgr_unregister(&pdev->dev); + + return 0; +} + +static struct platform_driver ts73xx_fpga_driver = { + .driver = { + .name = "ts73xx-fpga-mgr", + }, + .probe = ts73xx_fpga_probe, + .remove = ts73xx_fpga_remove, +}; +module_platform_driver(ts73xx_fpga_driver); + +MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); +MODULE_DESCRIPTION("TS-73xx FPGA Manager driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c new file mode 100644 index 000000000000..e359930bebc8 --- /dev/null +++ b/drivers/fpga/xilinx-pr-decoupler.c @@ -0,0 +1,161 @@ +/* + * Copyright (c) 2017, National Instruments Corp. + * Copyright (c) 2017, Xilix Inc + * + * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration + * Decoupler IP Core. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of_device.h> +#include <linux/module.h> +#include <linux/fpga/fpga-bridge.h> + +#define CTRL_CMD_DECOUPLE BIT(0) +#define CTRL_CMD_COUPLE 0 +#define CTRL_OFFSET 0 + +struct xlnx_pr_decoupler_data { + void __iomem *io_base; + struct clk *clk; +}; + +static inline void xlnx_pr_decoupler_write(struct xlnx_pr_decoupler_data *d, + u32 offset, u32 val) +{ + writel(val, d->io_base + offset); +} + +static inline u32 xlnx_pr_decouple_read(const struct xlnx_pr_decoupler_data *d, + u32 offset) +{ + return readl(d->io_base + offset); +} + +static int xlnx_pr_decoupler_enable_set(struct fpga_bridge *bridge, bool enable) +{ + int err; + struct xlnx_pr_decoupler_data *priv = bridge->priv; + + err = clk_enable(priv->clk); + if (err) + return err; + + if (enable) + xlnx_pr_decoupler_write(priv, CTRL_OFFSET, CTRL_CMD_COUPLE); + else + xlnx_pr_decoupler_write(priv, CTRL_OFFSET, CTRL_CMD_DECOUPLE); + + clk_disable(priv->clk); + + return 0; +} + +static int xlnx_pr_decoupler_enable_show(struct fpga_bridge *bridge) +{ + const struct xlnx_pr_decoupler_data *priv = bridge->priv; + u32 status; + int err; + + err = clk_enable(priv->clk); + if (err) + return err; + + status = readl(priv->io_base); + + clk_disable(priv->clk); + + return !status; +} + +static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = { + .enable_set = xlnx_pr_decoupler_enable_set, + .enable_show = xlnx_pr_decoupler_enable_show, +}; + +static const struct of_device_id xlnx_pr_decoupler_of_match[] = { + { .compatible = "xlnx,pr-decoupler-1.00", }, + { .compatible = "xlnx,pr-decoupler", }, + {}, +}; +MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match); + +static int xlnx_pr_decoupler_probe(struct platform_device *pdev) +{ + struct xlnx_pr_decoupler_data *priv; + int err; + struct resource *res; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->io_base)) + return PTR_ERR(priv->io_base); + + priv->clk = devm_clk_get(&pdev->dev, "aclk"); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, "input clock not found\n"); + return PTR_ERR(priv->clk); + } + + err = clk_prepare_enable(priv->clk); + if (err) { + dev_err(&pdev->dev, "unable to enable clock\n"); + return err; + } + + clk_disable(priv->clk); + + err = fpga_bridge_register(&pdev->dev, "Xilinx PR Decoupler", + &xlnx_pr_decoupler_br_ops, priv); + + if (err) { + dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler"); + clk_unprepare(priv->clk); + return err; + } + + return 0; +} + +static int xlnx_pr_decoupler_remove(struct platform_device *pdev) +{ + struct fpga_bridge *bridge = platform_get_drvdata(pdev); + struct xlnx_pr_decoupler_data *p = bridge->priv; + + fpga_bridge_unregister(&pdev->dev); + + clk_unprepare(p->clk); + + return 0; +} + +static struct platform_driver xlnx_pr_decoupler_driver = { + .probe = xlnx_pr_decoupler_probe, + .remove = xlnx_pr_decoupler_remove, + .driver = { + .name = "xlnx_pr_decoupler", + .of_match_table = of_match_ptr(xlnx_pr_decoupler_of_match), + }, +}; + +module_platform_driver(xlnx_pr_decoupler_driver); + +MODULE_DESCRIPTION("Xilinx Partial Reconfiguration Decoupler"); +MODULE_AUTHOR("Moritz Fischer <mdf@kernel.org>"); +MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c new file mode 100644 index 000000000000..9b62a4c2a3df --- /dev/null +++ b/drivers/fpga/xilinx-spi.c @@ -0,0 +1,198 @@ +/* + * Xilinx Spartan6 Slave Serial SPI Driver + * + * Copyright (C) 2017 DENX Software Engineering + * + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Manage Xilinx FPGA firmware that is loaded over SPI using + * the slave serial configuration interface. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/of.h> +#include <linux/spi/spi.h> +#include <linux/sizes.h> + +struct xilinx_spi_conf { + struct spi_device *spi; + struct gpio_desc *prog_b; + struct gpio_desc *done; +}; + +static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr) +{ + struct xilinx_spi_conf *conf = mgr->priv; + + if (!gpiod_get_value(conf->done)) + return FPGA_MGR_STATE_RESET; + + return FPGA_MGR_STATE_UNKNOWN; +} + +static int xilinx_spi_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct xilinx_spi_conf *conf = mgr->priv; + const size_t prog_latency_7500us = 7500; + const size_t prog_pulse_1us = 1; + + if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { + dev_err(&mgr->dev, "Partial reconfiguration not supported.\n"); + return -EINVAL; + } + + gpiod_set_value(conf->prog_b, 1); + + udelay(prog_pulse_1us); /* min is 500 ns */ + + gpiod_set_value(conf->prog_b, 0); + + if (gpiod_get_value(conf->done)) { + dev_err(&mgr->dev, "Unexpected DONE pin state...\n"); + return -EIO; + } + + /* program latency */ + usleep_range(prog_latency_7500us, prog_latency_7500us + 100); + return 0; +} + +static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf, + size_t count) +{ + struct xilinx_spi_conf *conf = mgr->priv; + const char *fw_data = buf; + const char *fw_data_end = fw_data + count; + + while (fw_data < fw_data_end) { + size_t remaining, stride; + int ret; + + remaining = fw_data_end - fw_data; + stride = min_t(size_t, remaining, SZ_4K); + + ret = spi_write(conf->spi, fw_data, stride); + if (ret) { + dev_err(&mgr->dev, "SPI error in firmware write: %d\n", + ret); + return ret; + } + fw_data += stride; + } + + return 0; +} + +static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf) +{ + struct spi_device *spi = conf->spi; + const u8 din_data[1] = { 0xff }; + int ret; + + ret = spi_write(conf->spi, din_data, sizeof(din_data)); + if (ret) + dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret); + + return ret; +} + +static int xilinx_spi_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + struct xilinx_spi_conf *conf = mgr->priv; + unsigned long timeout; + int ret; + + if (gpiod_get_value(conf->done)) + return xilinx_spi_apply_cclk_cycles(conf); + + timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us); + + while (time_before(jiffies, timeout)) { + + ret = xilinx_spi_apply_cclk_cycles(conf); + if (ret) + return ret; + + if (gpiod_get_value(conf->done)) + return xilinx_spi_apply_cclk_cycles(conf); + } + + dev_err(&mgr->dev, "Timeout after config data transfer.\n"); + return -ETIMEDOUT; +} + +static const struct fpga_manager_ops xilinx_spi_ops = { + .state = xilinx_spi_state, + .write_init = xilinx_spi_write_init, + .write = xilinx_spi_write, + .write_complete = xilinx_spi_write_complete, +}; + +static int xilinx_spi_probe(struct spi_device *spi) +{ + struct xilinx_spi_conf *conf; + + conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); + if (!conf) + return -ENOMEM; + + conf->spi = spi; + + /* PROGRAM_B is active low */ + conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW); + if (IS_ERR(conf->prog_b)) { + dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n", + PTR_ERR(conf->prog_b)); + return PTR_ERR(conf->prog_b); + } + + conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN); + if (IS_ERR(conf->done)) { + dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n", + PTR_ERR(conf->done)); + return PTR_ERR(conf->done); + } + + return fpga_mgr_register(&spi->dev, "Xilinx Slave Serial FPGA Manager", + &xilinx_spi_ops, conf); +} + +static int xilinx_spi_remove(struct spi_device *spi) +{ + fpga_mgr_unregister(&spi->dev); + + return 0; +} + +static const struct of_device_id xlnx_spi_of_match[] = { + { .compatible = "xlnx,fpga-slave-serial", }, + {} +}; +MODULE_DEVICE_TABLE(of, xlnx_spi_of_match); + +static struct spi_driver xilinx_slave_spi_driver = { + .driver = { + .name = "xlnx-slave-spi", + .of_match_table = of_match_ptr(xlnx_spi_of_match), + }, + .probe = xilinx_spi_probe, + .remove = xilinx_spi_remove, +}; + +module_spi_driver(xilinx_slave_spi_driver) + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); +MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI"); diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c index 34cb98139442..70b15b303471 100644 --- a/drivers/fpga/zynq-fpga.c +++ b/drivers/fpga/zynq-fpga.c @@ -72,6 +72,10 @@ #define CTRL_PCAP_PR_MASK BIT(27) /* Enable PCAP */ #define CTRL_PCAP_MODE_MASK BIT(26) +/* Lower rate to allow decrypt on the fly */ +#define CTRL_PCAP_RATE_EN_MASK BIT(25) +/* System booted in secure mode */ +#define CTRL_SEC_EN_MASK BIT(7) /* Miscellaneous Control Register bit definitions */ /* Internal PCAP loopback */ @@ -266,6 +270,17 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, if (err) return err; + /* check if bitstream is encrypted & and system's still secure */ + if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) { + ctrl = zynq_fpga_read(priv, CTRL_OFFSET); + if (!(ctrl & CTRL_SEC_EN_MASK)) { + dev_err(&mgr->dev, + "System not secure, can't use crypted bitstreams\n"); + err = -EINVAL; + goto out_err; + } + } + /* don't globally reset PL if we're doing partial reconfig */ if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { if (!zynq_fpga_has_sync(buf, count)) { @@ -337,12 +352,19 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, /* set configuration register with following options: * - enable PCAP interface - * - set throughput for maximum speed + * - set throughput for maximum speed (if bistream not crypted) * - set CPU in user mode */ ctrl = zynq_fpga_read(priv, CTRL_OFFSET); - zynq_fpga_write(priv, CTRL_OFFSET, - (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl)); + if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) + zynq_fpga_write(priv, CTRL_OFFSET, + (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK + | CTRL_PCAP_RATE_EN_MASK | ctrl)); + else + zynq_fpga_write(priv, CTRL_OFFSET, + (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK + | ctrl)); + /* We expect that the command queue is empty right now. */ status = zynq_fpga_read(priv, STATUS_OFFSET); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 1d1fa7248d63..5db44139cef8 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1035,18 +1035,14 @@ static int gpiochip_setup_dev(struct gpio_device *gdev) cdev_init(&gdev->chrdev, &gpio_fileops); gdev->chrdev.owner = THIS_MODULE; - gdev->chrdev.kobj.parent = &gdev->dev.kobj; gdev->dev.devt = MKDEV(MAJOR(gpio_devt), gdev->id); - status = cdev_add(&gdev->chrdev, gdev->dev.devt, 1); - if (status < 0) - chip_warn(gdev->chip, "failed to add char device %d:%d\n", - MAJOR(gpio_devt), gdev->id); - else - chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n", - MAJOR(gpio_devt), gdev->id); - status = device_add(&gdev->dev); + + status = cdev_device_add(&gdev->chrdev, &gdev->dev); if (status) - goto err_remove_chardev; + return status; + + chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n", + MAJOR(gpio_devt), gdev->id); status = gpiochip_sysfs_register(gdev); if (status) @@ -1061,9 +1057,7 @@ static int gpiochip_setup_dev(struct gpio_device *gdev) return 0; err_remove_device: - device_del(&gdev->dev); -err_remove_chardev: - cdev_del(&gdev->chrdev); + cdev_device_del(&gdev->chrdev, &gdev->dev); return status; } @@ -1347,8 +1341,7 @@ void gpiochip_remove(struct gpio_chip *chip) * be removed, else it will be dangling until the last user is * gone. */ - cdev_del(&gdev->chrdev); - device_del(&gdev->dev); + cdev_device_del(&gdev->chrdev, &gdev->dev); put_device(&gdev->dev); } EXPORT_SYMBOL_GPL(gpiochip_remove); diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 321b8833fa6f..736ac76d2a6a 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -333,7 +333,7 @@ static int create_gpadl_header(void *kbuffer, u32 size, * Gpadl is u32 and we are using a pointer which could * be 64-bit * This is governed by the guest/host protocol and - * so the hypervisor gurantees that this is ok. + * so the hypervisor guarantees that this is ok. */ for (i = 0; i < pfncurr; i++) gpadl_body->pfn[i] = slow_virt_to_phys( @@ -380,7 +380,7 @@ nomem: } /* - * vmbus_establish_gpadl - Estabish a GPADL for the specified buffer + * vmbus_establish_gpadl - Establish a GPADL for the specified buffer * * @channel: a channel * @kbuffer: from kmalloc or vmalloc @@ -731,7 +731,7 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel, /* Setup the descriptor */ desc.type = VM_PKT_DATA_USING_GPA_DIRECT; desc.flags = flags; - desc.dataoffset8 = descsize >> 3; /* in 8-bytes grandularity */ + desc.dataoffset8 = descsize >> 3; /* in 8-bytes granularity */ desc.length8 = (u16)(packetlen_aligned >> 3); desc.transactionid = requestid; desc.rangecount = pagecount; @@ -792,7 +792,7 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel, /* Setup the descriptor */ desc->type = VM_PKT_DATA_USING_GPA_DIRECT; desc->flags = VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED; - desc->dataoffset8 = desc_size >> 3; /* in 8-bytes grandularity */ + desc->dataoffset8 = desc_size >> 3; /* in 8-bytes granularity */ desc->length8 = (u16)(packetlen_aligned >> 3); desc->transactionid = requestid; desc->rangecount = 1; @@ -842,7 +842,7 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel, /* Setup the descriptor */ desc.type = VM_PKT_DATA_USING_GPA_DIRECT; desc.flags = VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED; - desc.dataoffset8 = descsize >> 3; /* in 8-bytes grandularity */ + desc.dataoffset8 = descsize >> 3; /* in 8-bytes granularity */ desc.length8 = (u16)(packetlen_aligned >> 3); desc.transactionid = requestid; desc.rangecount = 1; diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index fbcb06352308..735f9363f2e4 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -1080,30 +1080,30 @@ static void vmbus_onversion_response( } /* Channel message dispatch table */ -struct vmbus_channel_message_table_entry - channel_message_table[CHANNELMSG_COUNT] = { - {CHANNELMSG_INVALID, 0, NULL}, - {CHANNELMSG_OFFERCHANNEL, 0, vmbus_onoffer}, - {CHANNELMSG_RESCIND_CHANNELOFFER, 0, vmbus_onoffer_rescind}, - {CHANNELMSG_REQUESTOFFERS, 0, NULL}, - {CHANNELMSG_ALLOFFERS_DELIVERED, 1, vmbus_onoffers_delivered}, - {CHANNELMSG_OPENCHANNEL, 0, NULL}, - {CHANNELMSG_OPENCHANNEL_RESULT, 1, vmbus_onopen_result}, - {CHANNELMSG_CLOSECHANNEL, 0, NULL}, - {CHANNELMSG_GPADL_HEADER, 0, NULL}, - {CHANNELMSG_GPADL_BODY, 0, NULL}, - {CHANNELMSG_GPADL_CREATED, 1, vmbus_ongpadl_created}, - {CHANNELMSG_GPADL_TEARDOWN, 0, NULL}, - {CHANNELMSG_GPADL_TORNDOWN, 1, vmbus_ongpadl_torndown}, - {CHANNELMSG_RELID_RELEASED, 0, NULL}, - {CHANNELMSG_INITIATE_CONTACT, 0, NULL}, - {CHANNELMSG_VERSION_RESPONSE, 1, vmbus_onversion_response}, - {CHANNELMSG_UNLOAD, 0, NULL}, - {CHANNELMSG_UNLOAD_RESPONSE, 1, vmbus_unload_response}, - {CHANNELMSG_18, 0, NULL}, - {CHANNELMSG_19, 0, NULL}, - {CHANNELMSG_20, 0, NULL}, - {CHANNELMSG_TL_CONNECT_REQUEST, 0, NULL}, +const struct vmbus_channel_message_table_entry +channel_message_table[CHANNELMSG_COUNT] = { + { CHANNELMSG_INVALID, 0, NULL }, + { CHANNELMSG_OFFERCHANNEL, 0, vmbus_onoffer }, + { CHANNELMSG_RESCIND_CHANNELOFFER, 0, vmbus_onoffer_rescind }, + { CHANNELMSG_REQUESTOFFERS, 0, NULL }, + { CHANNELMSG_ALLOFFERS_DELIVERED, 1, vmbus_onoffers_delivered }, + { CHANNELMSG_OPENCHANNEL, 0, NULL }, + { CHANNELMSG_OPENCHANNEL_RESULT, 1, vmbus_onopen_result }, + { CHANNELMSG_CLOSECHANNEL, 0, NULL }, + { CHANNELMSG_GPADL_HEADER, 0, NULL }, + { CHANNELMSG_GPADL_BODY, 0, NULL }, + { CHANNELMSG_GPADL_CREATED, 1, vmbus_ongpadl_created }, + { CHANNELMSG_GPADL_TEARDOWN, 0, NULL }, + { CHANNELMSG_GPADL_TORNDOWN, 1, vmbus_ongpadl_torndown }, + { CHANNELMSG_RELID_RELEASED, 0, NULL }, + { CHANNELMSG_INITIATE_CONTACT, 0, NULL }, + { CHANNELMSG_VERSION_RESPONSE, 1, vmbus_onversion_response }, + { CHANNELMSG_UNLOAD, 0, NULL }, + { CHANNELMSG_UNLOAD_RESPONSE, 1, vmbus_unload_response }, + { CHANNELMSG_18, 0, NULL }, + { CHANNELMSG_19, 0, NULL }, + { CHANNELMSG_20, 0, NULL }, + { CHANNELMSG_TL_CONNECT_REQUEST, 0, NULL }, }; /* diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index a8366fec1458..fce27fb141cc 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -296,44 +296,47 @@ struct vmbus_channel *relid2channel(u32 relid) /* * vmbus_on_event - Process a channel event notification + * + * For batched channels (default) optimize host to guest signaling + * by ensuring: + * 1. While reading the channel, we disable interrupts from host. + * 2. Ensure that we process all posted messages from the host + * before returning from this callback. + * 3. Once we return, enable signaling from the host. Once this + * state is set we check to see if additional packets are + * available to read. In this case we repeat the process. + * If this tasklet has been running for a long time + * then reschedule ourselves. */ void vmbus_on_event(unsigned long data) { struct vmbus_channel *channel = (void *) data; - void (*callback_fn)(void *); + unsigned long time_limit = jiffies + 2; - /* - * A channel once created is persistent even when there - * is no driver handling the device. An unloading driver - * sets the onchannel_callback to NULL on the same CPU - * as where this interrupt is handled (in an interrupt context). - * Thus, checking and invoking the driver specific callback takes - * care of orderly unloading of the driver. - */ - callback_fn = READ_ONCE(channel->onchannel_callback); - if (unlikely(callback_fn == NULL)) - return; - - (*callback_fn)(channel->channel_callback_context); - - if (channel->callback_mode == HV_CALL_BATCHED) { - /* - * This callback reads the messages sent by the host. - * We can optimize host to guest signaling by ensuring: - * 1. While reading the channel, we disable interrupts from - * host. - * 2. Ensure that we process all posted messages from the host - * before returning from this callback. - * 3. Once we return, enable signaling from the host. Once this - * state is set we check to see if additional packets are - * available to read. In this case we repeat the process. + do { + void (*callback_fn)(void *); + + /* A channel once created is persistent even when + * there is no driver handling the device. An + * unloading driver sets the onchannel_callback to NULL. */ - if (hv_end_read(&channel->inbound) != 0) { - hv_begin_read(&channel->inbound); + callback_fn = READ_ONCE(channel->onchannel_callback); + if (unlikely(callback_fn == NULL)) + return; - tasklet_schedule(&channel->callback_event); - } - } + (*callback_fn)(channel->channel_callback_context); + + if (channel->callback_mode != HV_CALL_BATCHED) + return; + + if (likely(hv_end_read(&channel->inbound) == 0)) + return; + + hv_begin_read(&channel->inbound); + } while (likely(time_before(jiffies, time_limit))); + + /* The time limit (2 jiffies) has been reached */ + tasklet_schedule(&channel->callback_event); } /* diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index 665a64f1611e..12e7baecb84e 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -254,7 +254,10 @@ int hv_synic_init(unsigned int cpu) shared_sint.as_uint64 = 0; shared_sint.vector = HYPERVISOR_CALLBACK_VECTOR; shared_sint.masked = false; - shared_sint.auto_eoi = true; + if (ms_hyperv.hints & HV_X64_DEPRECATING_AEOI_RECOMMENDED) + shared_sint.auto_eoi = false; + else + shared_sint.auto_eoi = true; hv_set_synint_state(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, shared_sint.as_uint64); diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index 5fd03e59cee5..f5728deff893 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -722,8 +722,6 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size, 5*HZ); post_status(&dm_device); } - - return; } static void hv_online_page(struct page *pg) diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c index a5596a642ed0..daa75bd41f86 100644 --- a/drivers/hv/hv_fcopy.c +++ b/drivers/hv/hv_fcopy.c @@ -186,8 +186,6 @@ static void fcopy_send_data(struct work_struct *dummy) } } kfree(smsg_out); - - return; } /* diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index a1adfe2cfb34..e99ff2ddad40 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -69,7 +69,7 @@ static const int fw_versions[] = { * * While the request/response protocol is guaranteed by the host, we further * ensure this by serializing packet processing in this driver - we do not - * read additional packets from the VMBUs until the current packet is fully + * read additional packets from the VMBUS until the current packet is fully * handled. */ @@ -397,7 +397,7 @@ kvp_send_key(struct work_struct *dummy) * the max lengths specified. We will however, reserve room * for the string terminating character - in the utf16s_utf8s() * function we limit the size of the buffer where the converted - * string is placed to HV_KVP_EXCHANGE_MAX_*_SIZE -1 to gaurantee + * string is placed to HV_KVP_EXCHANGE_MAX_*_SIZE -1 to guarantee * that the strings can be properly terminated! */ @@ -483,8 +483,6 @@ kvp_send_key(struct work_struct *dummy) } kfree(message); - - return; } /* @@ -533,7 +531,7 @@ kvp_respond_to_host(struct hv_kvp_msg *msg_to_host, int error) */ if (error) { /* - * Something failed or we have timedout; + * Something failed or we have timed out; * terminate the current host-side iteration. */ goto response_done; @@ -607,8 +605,8 @@ response_done: * This callback is invoked when we get a KVP message from the host. * The host ensures that only one KVP transaction can be active at a time. * KVP implementation in Linux needs to forward the key to a user-mde - * component to retrive the corresponding value. Consequently, we cannot - * respond to the host in the conext of this callback. Since the host + * component to retrieve the corresponding value. Consequently, we cannot + * respond to the host in the context of this callback. Since the host * guarantees that at most only one transaction can be active at a time, * we stash away the transaction state in a set of global variables. */ diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c index e659d1b94a57..6831efd73394 100644 --- a/drivers/hv/hv_snapshot.c +++ b/drivers/hv/hv_snapshot.c @@ -212,8 +212,6 @@ static void vss_send_op(void) } kfree(vss_msg); - - return; } static void vss_handle_request(struct work_struct *dummy) diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index 884f83bba1ab..6113e915c50e 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -218,8 +218,8 @@ struct hv_per_cpu_context { struct hv_context { /* We only support running on top of Hyper-V - * So at this point this really can only contain the Hyper-V ID - */ + * So at this point this really can only contain the Hyper-V ID + */ u64 guestid; void *tsc_page; @@ -248,14 +248,6 @@ struct hv_context { extern struct hv_context hv_context; -struct hv_ring_buffer_debug_info { - u32 current_interrupt_mask; - u32 current_read_index; - u32 current_write_index; - u32 bytes_avail_toread; - u32 bytes_avail_towrite; -}; - /* Hv Interface */ extern int hv_init(void); @@ -289,9 +281,6 @@ int hv_ringbuffer_read(struct vmbus_channel *channel, void *buffer, u32 buflen, u32 *buffer_actual_len, u64 *requestid, bool raw); -void hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, - struct hv_ring_buffer_debug_info *debug_info); - /* * Maximum channels is determined by the size of the interrupt page * which is PAGE_SIZE. 1/2 of PAGE_SIZE is for send endpoint interrupt @@ -376,7 +365,7 @@ struct vmbus_channel_message_table_entry { void (*message_handler)(struct vmbus_channel_message_header *msg); }; -extern struct vmbus_channel_message_table_entry +extern const struct vmbus_channel_message_table_entry channel_message_table[CHANNELMSG_COUNT]; @@ -403,17 +392,17 @@ int vmbus_post_msg(void *buffer, size_t buflen, bool can_sleep); void vmbus_on_event(unsigned long data); void vmbus_on_msg_dpc(unsigned long data); -int hv_kvp_init(struct hv_util_service *); +int hv_kvp_init(struct hv_util_service *srv); void hv_kvp_deinit(void); -void hv_kvp_onchannelcallback(void *); +void hv_kvp_onchannelcallback(void *context); -int hv_vss_init(struct hv_util_service *); +int hv_vss_init(struct hv_util_service *srv); void hv_vss_deinit(void); -void hv_vss_onchannelcallback(void *); +void hv_vss_onchannelcallback(void *context); -int hv_fcopy_init(struct hv_util_service *); +int hv_fcopy_init(struct hv_util_service *srv); void hv_fcopy_deinit(void); -void hv_fcopy_onchannelcallback(void *); +void hv_fcopy_onchannelcallback(void *context); void vmbus_initiate_unload(bool crash); static inline void hv_poll_channel(struct vmbus_channel *channel, diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index c3f1a9e33cef..1f450c39a9b0 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -75,8 +75,6 @@ static void hv_signal_on_write(u32 old_write, struct vmbus_channel *channel) */ if (old_write == READ_ONCE(rbi->ring_buffer->read_index)) vmbus_setevent(channel); - - return; } /* Get the next write location for the specified ring buffer. */ @@ -210,6 +208,7 @@ void hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, ring_info->ring_buffer->interrupt_mask; } } +EXPORT_SYMBOL_GPL(hv_ringbuffer_get_debuginfo); /* Initialize the ring buffer. */ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info, @@ -269,14 +268,13 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info) int hv_ringbuffer_write(struct vmbus_channel *channel, const struct kvec *kv_list, u32 kv_count) { - int i = 0; + int i; u32 bytes_avail_towrite; - u32 totalbytes_towrite = 0; - + u32 totalbytes_towrite = sizeof(u64); u32 next_write_location; u32 old_write; - u64 prev_indices = 0; - unsigned long flags = 0; + u64 prev_indices; + unsigned long flags; struct hv_ring_buffer_info *outring_info = &channel->outbound; if (channel->rescind) @@ -285,8 +283,6 @@ int hv_ringbuffer_write(struct vmbus_channel *channel, for (i = 0; i < kv_count; i++) totalbytes_towrite += kv_list[i].iov_len; - totalbytes_towrite += sizeof(u64); - spin_lock_irqsave(&outring_info->ring_lock, flags); bytes_avail_towrite = hv_get_bytes_to_write(outring_info); @@ -349,18 +345,16 @@ int hv_ringbuffer_read(struct vmbus_channel *channel, u64 *requestid, bool raw) { u32 bytes_avail_toread; - u32 next_read_location = 0; + u32 next_read_location; u64 prev_indices = 0; struct vmpacket_descriptor desc; u32 offset; u32 packetlen; - int ret = 0; struct hv_ring_buffer_info *inring_info = &channel->inbound; if (buflen <= 0) return -EINVAL; - *buffer_actual_len = 0; *requestid = 0; @@ -371,7 +365,7 @@ int hv_ringbuffer_read(struct vmbus_channel *channel, * No error is set when there is even no header, drivers are * supposed to analyze buffer_actual_len. */ - return ret; + return 0; } init_cached_read_index(inring_info); @@ -417,7 +411,7 @@ int hv_ringbuffer_read(struct vmbus_channel *channel, hv_signal_on_read(channel); - return ret; + return 0; } /* diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 8370b9dc6037..0087b49095eb 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -787,8 +787,6 @@ static void vmbus_shutdown(struct device *child_device) if (drv->shutdown) drv->shutdown(dev); - - return; } @@ -855,7 +853,7 @@ void vmbus_on_msg_dpc(unsigned long data) struct hv_message *msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; struct vmbus_channel_message_header *hdr; - struct vmbus_channel_message_table_entry *entry; + const struct vmbus_channel_message_table_entry *entry; struct onmessage_work_context *ctx; u32 message_type = msg->header.message_type; diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c index 629e031b7456..09142e99e915 100644 --- a/drivers/hwtracing/coresight/of_coresight.c +++ b/drivers/hwtracing/coresight/of_coresight.c @@ -149,7 +149,7 @@ struct coresight_platform_data *of_get_coresight_platform_data( continue; /* The local out port number */ - pdata->outports[i] = endpoint.id; + pdata->outports[i] = endpoint.port; /* * Get a handle on the remote port and parent diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 3ff91e02fee3..57c14da5708f 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -1719,18 +1719,13 @@ int iio_device_register(struct iio_dev *indio_dev) cdev_init(&indio_dev->chrdev, &iio_buffer_fileops); indio_dev->chrdev.owner = indio_dev->info->driver_module; - indio_dev->chrdev.kobj.parent = &indio_dev->dev.kobj; - ret = cdev_add(&indio_dev->chrdev, indio_dev->dev.devt, 1); - if (ret < 0) - goto error_unreg_eventset; - ret = device_add(&indio_dev->dev); + ret = cdev_device_add(&indio_dev->chrdev, &indio_dev->dev); if (ret < 0) - goto error_cdev_del; + goto error_unreg_eventset; return 0; -error_cdev_del: - cdev_del(&indio_dev->chrdev); + error_unreg_eventset: iio_device_unregister_eventset(indio_dev); error_free_sysfs: @@ -1751,10 +1746,8 @@ void iio_device_unregister(struct iio_dev *indio_dev) { mutex_lock(&indio_dev->info_exist_lock); - device_del(&indio_dev->dev); + cdev_device_del(&indio_dev->chrdev, &indio_dev->dev); - if (indio_dev->chrdev.dev) - cdev_del(&indio_dev->chrdev); iio_device_unregister_debugfs(indio_dev); iio_disable_all_buffers(indio_dev); diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index 80d0fca05c06..112099c86a19 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -1205,12 +1205,15 @@ static void ib_ucm_release_dev(struct device *dev) struct ib_ucm_device *ucm_dev; ucm_dev = container_of(dev, struct ib_ucm_device, dev); - cdev_del(&ucm_dev->cdev); + kfree(ucm_dev); +} + +static void ib_ucm_free_dev(struct ib_ucm_device *ucm_dev) +{ if (ucm_dev->devnum < IB_UCM_MAX_DEVICES) clear_bit(ucm_dev->devnum, dev_map); else clear_bit(ucm_dev->devnum - IB_UCM_MAX_DEVICES, overflow_map); - kfree(ucm_dev); } static const struct file_operations ucm_fops = { @@ -1266,7 +1269,9 @@ static void ib_ucm_add_one(struct ib_device *device) if (!ucm_dev) return; + device_initialize(&ucm_dev->dev); ucm_dev->ib_dev = device; + ucm_dev->dev.release = ib_ucm_release_dev; devnum = find_first_zero_bit(dev_map, IB_UCM_MAX_DEVICES); if (devnum >= IB_UCM_MAX_DEVICES) { @@ -1286,16 +1291,14 @@ static void ib_ucm_add_one(struct ib_device *device) cdev_init(&ucm_dev->cdev, &ucm_fops); ucm_dev->cdev.owner = THIS_MODULE; kobject_set_name(&ucm_dev->cdev.kobj, "ucm%d", ucm_dev->devnum); - if (cdev_add(&ucm_dev->cdev, base, 1)) - goto err; ucm_dev->dev.class = &cm_class; ucm_dev->dev.parent = device->dev.parent; - ucm_dev->dev.devt = ucm_dev->cdev.dev; - ucm_dev->dev.release = ib_ucm_release_dev; + ucm_dev->dev.devt = base; + dev_set_name(&ucm_dev->dev, "ucm%d", ucm_dev->devnum); - if (device_register(&ucm_dev->dev)) - goto err_cdev; + if (cdev_device_add(&ucm_dev->cdev, &ucm_dev->dev)) + goto err_devnum; if (device_create_file(&ucm_dev->dev, &dev_attr_ibdev)) goto err_dev; @@ -1304,15 +1307,11 @@ static void ib_ucm_add_one(struct ib_device *device) return; err_dev: - device_unregister(&ucm_dev->dev); -err_cdev: - cdev_del(&ucm_dev->cdev); - if (ucm_dev->devnum < IB_UCM_MAX_DEVICES) - clear_bit(devnum, dev_map); - else - clear_bit(devnum, overflow_map); + cdev_device_del(&ucm_dev->cdev, &ucm_dev->dev); +err_devnum: + ib_ucm_free_dev(ucm_dev); err: - kfree(ucm_dev); + put_device(&ucm_dev->dev); return; } @@ -1323,7 +1322,9 @@ static void ib_ucm_remove_one(struct ib_device *device, void *client_data) if (!ucm_dev) return; - device_unregister(&ucm_dev->dev); + cdev_device_del(&ucm_dev->cdev, &ucm_dev->dev); + ib_ucm_free_dev(ucm_dev); + put_device(&ucm_dev->dev); } static CLASS_ATTR_STRING(abi_version, S_IRUGO, diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 200422d24299..36a6f5c8914c 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -1187,7 +1187,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, cdev_init(&port->cdev, &umad_fops); port->cdev.owner = THIS_MODULE; - port->cdev.kobj.parent = &umad_dev->kobj; + cdev_set_parent(&port->cdev, &umad_dev->kobj); kobject_set_name(&port->cdev.kobj, "umad%d", port->dev_num); if (cdev_add(&port->cdev, base, 1)) goto err_cdev; @@ -1206,7 +1206,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, base += IB_UMAD_MAX_PORTS; cdev_init(&port->sm_cdev, &umad_sm_fops); port->sm_cdev.owner = THIS_MODULE; - port->sm_cdev.kobj.parent = &umad_dev->kobj; + cdev_set_parent(&port->sm_cdev, &umad_dev->kobj); kobject_set_name(&port->sm_cdev.kobj, "issm%d", port->dev_num); if (cdev_add(&port->sm_cdev, base, 1)) goto err_sm_cdev; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 3a9883d1257e..3d2609608f58 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -1093,7 +1093,7 @@ static void ib_uverbs_add_one(struct ib_device *device) cdev_init(&uverbs_dev->cdev, NULL); uverbs_dev->cdev.owner = THIS_MODULE; uverbs_dev->cdev.ops = device->mmap ? &uverbs_mmap_fops : &uverbs_fops; - uverbs_dev->cdev.kobj.parent = &uverbs_dev->kobj; + cdev_set_parent(&uverbs_dev->cdev, &uverbs_dev->kobj); kobject_set_name(&uverbs_dev->cdev.kobj, "uverbs%d", uverbs_dev->devnum); if (cdev_add(&uverbs_dev->cdev, base, 1)) goto err_cdev; diff --git a/drivers/infiniband/hw/hfi1/device.c b/drivers/infiniband/hw/hfi1/device.c index bf64b5a7bfd7..bbb6069dec2a 100644 --- a/drivers/infiniband/hw/hfi1/device.c +++ b/drivers/infiniband/hw/hfi1/device.c @@ -69,7 +69,7 @@ int hfi1_cdev_init(int minor, const char *name, cdev_init(cdev, fops); cdev->owner = THIS_MODULE; - cdev->kobj.parent = parent; + cdev_set_parent(cdev, parent); kobject_set_name(&cdev->kobj, name); ret = cdev_add(cdev, dev, 1); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index e9ae3d500a55..925571475005 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -1354,8 +1354,6 @@ static void evdev_cleanup(struct evdev *evdev) evdev_mark_dead(evdev); evdev_hangup(evdev); - cdev_del(&evdev->cdev); - /* evdev is marked dead so no one else accesses evdev->open */ if (evdev->open) { input_flush_device(handle, NULL); @@ -1416,12 +1414,8 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, goto err_free_evdev; cdev_init(&evdev->cdev, &evdev_fops); - evdev->cdev.kobj.parent = &evdev->dev.kobj; - error = cdev_add(&evdev->cdev, evdev->dev.devt, 1); - if (error) - goto err_unregister_handle; - error = device_add(&evdev->dev); + error = cdev_device_add(&evdev->cdev, &evdev->dev); if (error) goto err_cleanup_evdev; @@ -1429,7 +1423,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, err_cleanup_evdev: evdev_cleanup(evdev); - err_unregister_handle: input_unregister_handle(&evdev->handle); err_free_evdev: put_device(&evdev->dev); @@ -1442,7 +1435,7 @@ static void evdev_disconnect(struct input_handle *handle) { struct evdev *evdev = handle->private; - device_del(&evdev->dev); + cdev_device_del(&evdev->cdev, &evdev->dev); evdev_cleanup(evdev); input_free_minor(MINOR(evdev->dev.devt)); input_unregister_handle(handle); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 065e67bf56dd..29d677c714d2 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -742,8 +742,6 @@ static void joydev_cleanup(struct joydev *joydev) joydev_mark_dead(joydev); joydev_hangup(joydev); - cdev_del(&joydev->cdev); - /* joydev is marked dead so no one else accesses joydev->open */ if (joydev->open) input_close_device(handle); @@ -913,12 +911,8 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, goto err_free_joydev; cdev_init(&joydev->cdev, &joydev_fops); - joydev->cdev.kobj.parent = &joydev->dev.kobj; - error = cdev_add(&joydev->cdev, joydev->dev.devt, 1); - if (error) - goto err_unregister_handle; - error = device_add(&joydev->dev); + error = cdev_device_add(&joydev->cdev, &joydev->dev); if (error) goto err_cleanup_joydev; @@ -926,7 +920,6 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, err_cleanup_joydev: joydev_cleanup(joydev); - err_unregister_handle: input_unregister_handle(&joydev->handle); err_free_joydev: put_device(&joydev->dev); @@ -939,7 +932,7 @@ static void joydev_disconnect(struct input_handle *handle) { struct joydev *joydev = handle->private; - device_del(&joydev->dev); + cdev_device_del(&joydev->cdev, &joydev->dev); joydev_cleanup(joydev); input_free_minor(MINOR(joydev->dev.devt)); input_unregister_handle(handle); diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index b604564dec5c..0e0ff84088fd 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -812,8 +812,6 @@ static void mousedev_cleanup(struct mousedev *mousedev) mousedev_mark_dead(mousedev); mousedev_hangup(mousedev); - cdev_del(&mousedev->cdev); - /* mousedev is marked dead so no one else accesses mousedev->open */ if (mousedev->open) input_close_device(handle); @@ -901,12 +899,8 @@ static struct mousedev *mousedev_create(struct input_dev *dev, } cdev_init(&mousedev->cdev, &mousedev_fops); - mousedev->cdev.kobj.parent = &mousedev->dev.kobj; - error = cdev_add(&mousedev->cdev, mousedev->dev.devt, 1); - if (error) - goto err_unregister_handle; - error = device_add(&mousedev->dev); + error = cdev_device_add(&mousedev->cdev, &mousedev->dev); if (error) goto err_cleanup_mousedev; @@ -914,7 +908,6 @@ static struct mousedev *mousedev_create(struct input_dev *dev, err_cleanup_mousedev: mousedev_cleanup(mousedev); - err_unregister_handle: if (!mixdev) input_unregister_handle(&mousedev->handle); err_free_mousedev: @@ -927,7 +920,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev, static void mousedev_destroy(struct mousedev *mousedev) { - device_del(&mousedev->dev); + cdev_device_del(&mousedev->cdev, &mousedev->dev); mousedev_cleanup(mousedev); input_free_minor(MINOR(mousedev->dev.devt)); if (mousedev != mousedev_mix) diff --git a/drivers/media/cec/cec-core.c b/drivers/media/cec/cec-core.c index 37217e205040..3163e038a364 100644 --- a/drivers/media/cec/cec-core.c +++ b/drivers/media/cec/cec-core.c @@ -137,24 +137,17 @@ static int __must_check cec_devnode_register(struct cec_devnode *devnode, /* Part 2: Initialize and register the character device */ cdev_init(&devnode->cdev, &cec_devnode_fops); - devnode->cdev.kobj.parent = &devnode->dev.kobj; devnode->cdev.owner = owner; - ret = cdev_add(&devnode->cdev, devnode->dev.devt, 1); - if (ret < 0) { - pr_err("%s: cdev_add failed\n", __func__); + ret = cdev_device_add(&devnode->cdev, &devnode->dev); + if (ret) { + pr_err("%s: cdev_device_add failed\n", __func__); goto clr_bit; } - ret = device_add(&devnode->dev); - if (ret) - goto cdev_del; - devnode->registered = true; return 0; -cdev_del: - cdev_del(&devnode->cdev); clr_bit: mutex_lock(&cec_devnode_lock); clear_bit(devnode->minor, cec_devnode_nums); @@ -190,8 +183,7 @@ static void cec_devnode_unregister(struct cec_devnode *devnode) devnode->unregistered = true; mutex_unlock(&devnode->lock); - device_del(&devnode->dev); - cdev_del(&devnode->cdev); + cdev_device_del(&devnode->cdev, &devnode->dev); put_device(&devnode->dev); } diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c index ae46753c90cb..423248f577b6 100644 --- a/drivers/media/media-devnode.c +++ b/drivers/media/media-devnode.c @@ -248,31 +248,22 @@ int __must_check media_devnode_register(struct media_device *mdev, dev_set_name(&devnode->dev, "media%d", devnode->minor); device_initialize(&devnode->dev); - /* Part 2: Initialize and register the character device */ + /* Part 2: Initialize the character device */ cdev_init(&devnode->cdev, &media_devnode_fops); devnode->cdev.owner = owner; - devnode->cdev.kobj.parent = &devnode->dev.kobj; - ret = cdev_add(&devnode->cdev, MKDEV(MAJOR(media_dev_t), devnode->minor), 1); + /* Part 3: Add the media and char device */ + ret = cdev_device_add(&devnode->cdev, &devnode->dev); if (ret < 0) { - pr_err("%s: cdev_add failed\n", __func__); + pr_err("%s: cdev_device_add failed\n", __func__); goto cdev_add_error; } - /* Part 3: Add the media device */ - ret = device_add(&devnode->dev); - if (ret < 0) { - pr_err("%s: device_add failed\n", __func__); - goto device_add_error; - } - /* Part 4: Activate this minor. The char device can now be used. */ set_bit(MEDIA_FLAG_REGISTERED, &devnode->flags); return 0; -device_add_error: - cdev_del(&devnode->cdev); cdev_add_error: mutex_lock(&media_devnode_lock); clear_bit(devnode->minor, media_devnode_nums); @@ -298,9 +289,8 @@ void media_devnode_unregister(struct media_devnode *devnode) { mutex_lock(&media_devnode_lock); /* Delete the cdev on this minor as well */ - cdev_del(&devnode->cdev); + cdev_device_del(&devnode->cdev, &devnode->dev); mutex_unlock(&media_devnode_lock); - device_del(&devnode->dev); devnode->media_dev = NULL; put_device(&devnode->dev); } diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index c290990d73ed..39d1acb27452 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -419,16 +419,6 @@ config VMWARE_BALLOON To compile this driver as a module, choose M here: the module will be called vmw_balloon. -config ARM_CHARLCD - bool "ARM Ltd. Character LCD Driver" - depends on PLAT_VERSATILE - help - This is a driver for the character LCD found on the ARM Ltd. - Versatile and RealView Platform Baseboards. It doesn't do - very much more than display the text "ARM Linux" on the first - line and the Linux version on the second line, but that's - still useful. - config PCH_PHUB tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" select GENERIC_NET_UTILS @@ -492,284 +482,13 @@ config VEXPRESS_SYSCFG bus. System Configuration interface is one of the possible means of generating transactions on this bus. -config PANEL - tristate "Parallel port LCD/Keypad Panel support" - depends on PARPORT - ---help--- - Say Y here if you have an HD44780 or KS-0074 LCD connected to your - parallel port. This driver also features 4 and 6-key keypads. The LCD - is accessible through the /dev/lcd char device (10, 156), and the - keypad through /dev/keypad (10, 185). This code can either be - compiled as a module, or linked into the kernel and started at boot. - If you don't understand what all this is about, say N. - -if PANEL - -config PANEL_PARPORT - int "Default parallel port number (0=LPT1)" - range 0 255 - default "0" - ---help--- - This is the index of the parallel port the panel is connected to. One - driver instance only supports one parallel port, so if your keypad - and LCD are connected to two separate ports, you have to start two - modules with different arguments. Numbering starts with '0' for LPT1, - and so on. - -config PANEL_PROFILE - int "Default panel profile (0-5, 0=custom)" - range 0 5 - default "5" - ---help--- - To ease configuration, the driver supports different configuration - profiles for past and recent wirings. These profiles can also be - used to define an approximative configuration, completed by a few - other options. Here are the profiles : - - 0 = custom (see further) - 1 = 2x16 parallel LCD, old keypad - 2 = 2x16 serial LCD (KS-0074), new keypad - 3 = 2x16 parallel LCD (Hantronix), no keypad - 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad - 5 = 2x40 parallel LCD (old one), with old keypad - - Custom configurations allow you to define how your display is - wired to the parallel port, and how it works. This is only intended - for experts. - -config PANEL_KEYPAD - depends on PANEL_PROFILE="0" - int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" - range 0 3 - default 0 - ---help--- - This enables and configures a keypad connected to the parallel port. - The keys will be read from character device 10,185. Valid values are : - - 0 : do not enable this driver - 1 : old 6 keys keypad - 2 : new 6 keys keypad, as used on the server at www.ant-computing.com - 3 : Nexcom NSA1045's 4 keys keypad - - New profiles can be described in the driver source. The driver also - supports simultaneous keys pressed when the keypad supports them. - -config PANEL_LCD - depends on PANEL_PROFILE="0" - int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" - range 0 5 - default 0 - ---help--- - This enables and configures an LCD connected to the parallel port. - The driver includes an interpreter for escape codes starting with - '\e[L' which are specific to the LCD, and a few ANSI codes. The - driver will be registered as character device 10,156, usually - under the name '/dev/lcd'. There are a total of 6 supported types : - - 0 : do not enable the driver - 1 : custom configuration and wiring (see further) - 2 : 2x16 & 2x40 parallel LCD (old wiring) - 3 : 2x16 serial LCD (KS-0074 based) - 4 : 2x16 parallel LCD (Hantronix wiring) - 5 : 2x16 parallel LCD (Nexcom wiring) - - When type '1' is specified, other options will appear to configure - more precise aspects (wiring, dimensions, protocol, ...). Please note - that those values changed from the 2.4 driver for better consistency. - -config PANEL_LCD_HEIGHT - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "Number of lines on the LCD (1-2)" - range 1 2 - default 2 - ---help--- - This is the number of visible character lines on the LCD in custom profile. - It can either be 1 or 2. - -config PANEL_LCD_WIDTH - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "Number of characters per line on the LCD (1-40)" - range 1 40 - default 40 - ---help--- - This is the number of characters per line on the LCD in custom profile. - Common values are 16,20,24,40. - -config PANEL_LCD_BWIDTH - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "Internal LCD line width (1-40, 40 by default)" - range 1 40 - default 40 - ---help--- - Most LCDs use a standard controller which supports hardware lines of 40 - characters, although sometimes only 16, 20 or 24 of them are really wired - to the terminal. This results in some non-visible but addressable characters, - and is the case for most parallel LCDs. Other LCDs, and some serial ones, - however, use the same line width internally as what is visible. The KS0074 - for example, uses 16 characters per line for 16 visible characters per line. - - This option lets you configure the value used by your LCD in 'custom' profile. - If you don't know, put '40' here. - -config PANEL_LCD_HWIDTH - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "Hardware LCD line width (1-64, 64 by default)" - range 1 64 - default 64 - ---help--- - Most LCDs use a single address bit to differentiate line 0 and line 1. Since - some of them need to be able to address 40 chars with the lower bits, they - often use the immediately superior power of 2, which is 64, to address the - next line. - - If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and - 64 here for a 2x40. - -config PANEL_LCD_CHARSET - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "LCD character set (0=normal, 1=KS0074)" - range 0 1 - default 0 - ---help--- - Some controllers such as the KS0074 use a somewhat strange character set - where many symbols are at unusual places. The driver knows how to map - 'standard' ASCII characters to the character sets used by these controllers. - Valid values are : - - 0 : normal (untranslated) character set - 1 : KS0074 character set - - If you don't know, use the normal one (0). - -config PANEL_LCD_PROTO - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "LCD communication mode (0=parallel 8 bits, 1=serial)" - range 0 1 - default 0 - ---help--- - This driver now supports any serial or parallel LCD wired to a parallel - port. But before assigning signals, the driver needs to know if it will - be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires - (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals - (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits - parallel LCD, and 1 for a serial LCD. - -config PANEL_LCD_PIN_E - depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" - int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " - range -17 17 - default 14 +config ASPEED_LPC_CTRL + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON + tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control" ---help--- - This describes the number of the parallel port pin to which the LCD 'E' - signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'E' pin in custom profile is '14' (AUTOFEED). - -config PANEL_LCD_PIN_RS - depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" - int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " - range -17 17 - default 17 - ---help--- - This describes the number of the parallel port pin to which the LCD 'RS' - signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'RS' pin in custom profile is '17' (SELECT IN). - -config PANEL_LCD_PIN_RW - depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" - int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " - range -17 17 - default 16 - ---help--- - This describes the number of the parallel port pin to which the LCD 'RW' - signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'RW' pin in custom profile is '16' (INIT). - -config PANEL_LCD_PIN_SCL - depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" - int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " - range -17 17 - default 1 - ---help--- - This describes the number of the parallel port pin to which the serial - LCD 'SCL' signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'SCL' pin in custom profile is '1' (STROBE). - -config PANEL_LCD_PIN_SDA - depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" - int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " - range -17 17 - default 2 - ---help--- - This describes the number of the parallel port pin to which the serial - LCD 'SDA' signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'SDA' pin in custom profile is '2' (D0). - -config PANEL_LCD_PIN_BL - depends on PANEL_PROFILE="0" && PANEL_LCD="1" - int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " - range -17 17 - default 0 - ---help--- - This describes the number of the parallel port pin to which the LCD 'BL' signal - has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'BL' pin in custom profile is '0' (uncontrolled). - -config PANEL_CHANGE_MESSAGE - bool "Change LCD initialization message ?" - default "n" - ---help--- - This allows you to replace the boot message indicating the kernel version - and the driver version with a custom message. This is useful on appliances - where a simple 'Starting system' message can be enough to stop a customer - from worrying. - - If you say 'Y' here, you'll be able to choose a message yourself. Otherwise, - say 'N' and keep the default message with the version. - -config PANEL_BOOT_MESSAGE - depends on PANEL_CHANGE_MESSAGE="y" - string "New initialization message" - default "" - ---help--- - This allows you to replace the boot message indicating the kernel version - and the driver version with a custom message. This is useful on appliances - where a simple 'Starting system' message can be enough to stop a customer - from worrying. - - An empty message will only clear the display at driver init time. Any other - printf()-formatted message is valid with newline and escape codes. - -endif # PANEL + Control Aspeed ast2400/2500 HOST LPC to BMC mappings through + ioctl()s, the driver also provides a read/write interface to a BMC ram + region where the host LPC read/write region can be buffered. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7a3ea89339b4..4fb10af2ea1c 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -37,7 +37,6 @@ obj-y += eeprom/ obj-y += cb710/ obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o -obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ obj-y += lis3lv02d/ @@ -53,7 +52,7 @@ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ -obj-$(CONFIG_PANEL) += panel.o +obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o @@ -62,6 +61,8 @@ lkdtm-$(CONFIG_LKDTM) += lkdtm_perms.o lkdtm-$(CONFIG_LKDTM) += lkdtm_rodata_objcopy.o lkdtm-$(CONFIG_LKDTM) += lkdtm_usercopy.o +KCOV_INSTRUMENT_lkdtm_rodata.o := n + OBJCOPYFLAGS := OBJCOPYFLAGS_lkdtm_rodata_objcopy.o := \ --set-section-flags .text=alloc,readonly \ diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/misc/aspeed-lpc-ctrl.c new file mode 100644 index 000000000000..b5439643f54b --- /dev/null +++ b/drivers/misc/aspeed-lpc-ctrl.c @@ -0,0 +1,266 @@ +/* + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/mfd/syscon.h> +#include <linux/miscdevice.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/poll.h> +#include <linux/regmap.h> + +#include <linux/aspeed-lpc-ctrl.h> + +#define DEVICE_NAME "aspeed-lpc-ctrl" + +#define HICR7 0x8 +#define HICR8 0xc + +struct aspeed_lpc_ctrl { + struct miscdevice miscdev; + struct regmap *regmap; + phys_addr_t mem_base; + resource_size_t mem_size; + u32 pnor_size; + u32 pnor_base; +}; + +static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file) +{ + return container_of(file->private_data, struct aspeed_lpc_ctrl, + miscdev); +} + +static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); + unsigned long vsize = vma->vm_end - vma->vm_start; + pgprot_t prot = vma->vm_page_prot; + + if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size) + return -EINVAL; + + /* ast2400/2500 AHB accesses are not cache coherent */ + prot = pgprot_noncached(prot); + + if (remap_pfn_range(vma, vma->vm_start, + (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff, + vsize, prot)) + return -EAGAIN; + + return 0; +} + +static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd, + unsigned long param) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); + void __user *p = (void __user *)param; + struct aspeed_lpc_ctrl_mapping map; + u32 addr; + u32 size; + long rc; + + if (copy_from_user(&map, p, sizeof(map))) + return -EFAULT; + + if (map.flags != 0) + return -EINVAL; + + switch (cmd) { + case ASPEED_LPC_CTRL_IOCTL_GET_SIZE: + /* The flash windows don't report their size */ + if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY) + return -EINVAL; + + /* Support more than one window id in the future */ + if (map.window_id != 0) + return -EINVAL; + + map.size = lpc_ctrl->mem_size; + + return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0; + case ASPEED_LPC_CTRL_IOCTL_MAP: + + /* + * The top half of HICR7 is the MSB of the BMC address of the + * mapping. + * The bottom half of HICR7 is the MSB of the HOST LPC + * firmware space address of the mapping. + * + * The 1 bits in the top of half of HICR8 represent the bits + * (in the requested address) that should be ignored and + * replaced with those from the top half of HICR7. + * The 1 bits in the bottom half of HICR8 represent the bits + * (in the requested address) that should be kept and pass + * into the BMC address space. + */ + + /* + * It doesn't make sense to talk about a size or offset with + * low 16 bits set. Both HICR7 and HICR8 talk about the top 16 + * bits of addresses and sizes. + */ + + if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff)) + return -EINVAL; + + /* + * Because of the way the masks work in HICR8 offset has to + * be a multiple of size. + */ + if (map.offset & (map.size - 1)) + return -EINVAL; + + if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) { + addr = lpc_ctrl->pnor_base; + size = lpc_ctrl->pnor_size; + } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) { + addr = lpc_ctrl->mem_base; + size = lpc_ctrl->mem_size; + } else { + return -EINVAL; + } + + /* Check overflow first! */ + if (map.offset + map.size < map.offset || + map.offset + map.size > size) + return -EINVAL; + + if (map.size == 0 || map.size > size) + return -EINVAL; + + addr += map.offset; + + /* + * addr (host lpc address) is safe regardless of values. This + * simply changes the address the host has to request on its + * side of the LPC bus. This cannot impact the hosts own + * memory space by surprise as LPC specific accessors are + * required. The only strange thing that could be done is + * setting the lower 16 bits but the shift takes care of that. + */ + + rc = regmap_write(lpc_ctrl->regmap, HICR7, + (addr | (map.addr >> 16))); + if (rc) + return rc; + + return regmap_write(lpc_ctrl->regmap, HICR8, + (~(map.size - 1)) | ((map.size >> 16) - 1)); + } + + return -EINVAL; +} + +static const struct file_operations aspeed_lpc_ctrl_fops = { + .owner = THIS_MODULE, + .mmap = aspeed_lpc_ctrl_mmap, + .unlocked_ioctl = aspeed_lpc_ctrl_ioctl, +}; + +static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) +{ + struct aspeed_lpc_ctrl *lpc_ctrl; + struct device_node *node; + struct resource resm; + struct device *dev; + int rc; + + dev = &pdev->dev; + + lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL); + if (!lpc_ctrl) + return -ENOMEM; + + node = of_parse_phandle(dev->of_node, "flash", 0); + if (!node) { + dev_err(dev, "Didn't find host pnor flash node\n"); + return -ENODEV; + } + + rc = of_address_to_resource(node, 1, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for flash\n"); + return rc; + } + + lpc_ctrl->pnor_size = resource_size(&resm); + lpc_ctrl->pnor_base = resm.start; + + dev_set_drvdata(&pdev->dev, lpc_ctrl); + + node = of_parse_phandle(dev->of_node, "memory-region", 0); + if (!node) { + dev_err(dev, "Didn't find reserved memory\n"); + return -EINVAL; + } + + rc = of_address_to_resource(node, 0, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for reserved memory\n"); + return -ENOMEM; + } + + lpc_ctrl->mem_size = resource_size(&resm); + lpc_ctrl->mem_base = resm.start; + + lpc_ctrl->regmap = syscon_node_to_regmap( + pdev->dev.parent->of_node); + if (IS_ERR(lpc_ctrl->regmap)) { + dev_err(dev, "Couldn't get regmap\n"); + return -ENODEV; + } + + lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR; + lpc_ctrl->miscdev.name = DEVICE_NAME; + lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops; + lpc_ctrl->miscdev.parent = dev; + rc = misc_register(&lpc_ctrl->miscdev); + if (rc) + dev_err(dev, "Unable to register device\n"); + else + dev_info(dev, "Loaded at %pr\n", &resm); + + return rc; +} + +static int aspeed_lpc_ctrl_remove(struct platform_device *pdev) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev); + + misc_deregister(&lpc_ctrl->miscdev); + + return 0; +} + +static const struct of_device_id aspeed_lpc_ctrl_match[] = { + { .compatible = "aspeed,ast2400-lpc-ctrl" }, + { .compatible = "aspeed,ast2500-lpc-ctrl" }, + { }, +}; + +static struct platform_driver aspeed_lpc_ctrl_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_lpc_ctrl_match, + }, + .probe = aspeed_lpc_ctrl_probe, + .remove = aspeed_lpc_ctrl_remove, +}; + +module_platform_driver(aspeed_lpc_ctrl_driver); + +MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>"); +MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings"); diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c index c7112276a039..28bb495f0cf1 100644 --- a/drivers/misc/ds1682.c +++ b/drivers/misc/ds1682.c @@ -227,9 +227,16 @@ static const struct i2c_device_id ds1682_id[] = { }; MODULE_DEVICE_TABLE(i2c, ds1682_id); +static const struct of_device_id ds1682_of_match[] = { + { .compatible = "dallas,ds1682", }, + {} +}; +MODULE_DEVICE_TABLE(of, ds1682_of_match); + static struct i2c_driver ds1682_driver = { .driver = { .name = "ds1682", + .of_match_table = ds1682_of_match, }, .probe = ds1682_probe, .remove = ds1682_remove, diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c index 4a22a1d99395..ab0df6a17690 100644 --- a/drivers/misc/eeprom/idt_89hpesx.c +++ b/drivers/misc/eeprom/idt_89hpesx.c @@ -1541,12 +1541,69 @@ static const struct i2c_device_id idt_ids[] = { }; MODULE_DEVICE_TABLE(i2c, idt_ids); +static const struct of_device_id idt_of_match[] = { + { .compatible = "idt,89hpes8nt2", }, + { .compatible = "idt,89hpes12nt3", }, + + { .compatible = "idt,89hpes24nt6ag2", }, + { .compatible = "idt,89hpes32nt8ag2", }, + { .compatible = "idt,89hpes32nt8bg2", }, + { .compatible = "idt,89hpes12nt12g2", }, + { .compatible = "idt,89hpes16nt16g2", }, + { .compatible = "idt,89hpes24nt24g2", }, + { .compatible = "idt,89hpes32nt24ag2", }, + { .compatible = "idt,89hpes32nt24bg2", }, + + { .compatible = "idt,89hpes12n3", }, + { .compatible = "idt,89hpes12n3a", }, + { .compatible = "idt,89hpes24n3", }, + { .compatible = "idt,89hpes24n3a", }, + + { .compatible = "idt,89hpes32h8", }, + { .compatible = "idt,89hpes32h8g2", }, + { .compatible = "idt,89hpes48h12", }, + { .compatible = "idt,89hpes48h12g2", }, + { .compatible = "idt,89hpes48h12ag2", }, + { .compatible = "idt,89hpes16h16", }, + { .compatible = "idt,89hpes22h16", }, + { .compatible = "idt,89hpes22h16g2", }, + { .compatible = "idt,89hpes34h16", }, + { .compatible = "idt,89hpes34h16g2", }, + { .compatible = "idt,89hpes64h16", }, + { .compatible = "idt,89hpes64h16g2", }, + { .compatible = "idt,89hpes64h16ag2", }, + + { .compatible = "idt,89hpes12t3g2", }, + { .compatible = "idt,89hpes24t3g2", }, + + { .compatible = "idt,89hpes16t4", }, + { .compatible = "idt,89hpes4t4g2", }, + { .compatible = "idt,89hpes10t4g2", }, + { .compatible = "idt,89hpes16t4g2", }, + { .compatible = "idt,89hpes16t4ag2", }, + { .compatible = "idt,89hpes5t5", }, + { .compatible = "idt,89hpes6t5", }, + { .compatible = "idt,89hpes8t5", }, + { .compatible = "idt,89hpes8t5a", }, + { .compatible = "idt,89hpes24t6", }, + { .compatible = "idt,89hpes6t6g2", }, + { .compatible = "idt,89hpes24t6g2", }, + { .compatible = "idt,89hpes16t7", }, + { .compatible = "idt,89hpes32t8", }, + { .compatible = "idt,89hpes32t8g2", }, + { .compatible = "idt,89hpes48t12", }, + { .compatible = "idt,89hpes48t12g2", }, + { }, +}; +MODULE_DEVICE_TABLE(of, idt_of_match); + /* * idt_driver - IDT 89HPESx driver structure */ static struct i2c_driver idt_driver = { .driver = { .name = IDT_NAME, + .of_match_table = idt_of_match, }, .probe = idt_probe, .remove = idt_remove, diff --git a/drivers/misc/lkdtm.h b/drivers/misc/lkdtm.h index 67d27be60405..3b4976396ec4 100644 --- a/drivers/misc/lkdtm.h +++ b/drivers/misc/lkdtm.h @@ -27,6 +27,7 @@ void lkdtm_REFCOUNT_ZERO_SUB(void); void lkdtm_REFCOUNT_ZERO_ADD(void); void lkdtm_CORRUPT_LIST_ADD(void); void lkdtm_CORRUPT_LIST_DEL(void); +void lkdtm_CORRUPT_USER_DS(void); /* lkdtm_heap.c */ void lkdtm_OVERWRITE_ALLOCATION(void); diff --git a/drivers/misc/lkdtm_bugs.c b/drivers/misc/lkdtm_bugs.c index e3f4cd8876b5..d9028ef50fbe 100644 --- a/drivers/misc/lkdtm_bugs.c +++ b/drivers/misc/lkdtm_bugs.c @@ -8,6 +8,8 @@ #include <linux/list.h> #include <linux/refcount.h> #include <linux/sched.h> +#include <linux/sched/signal.h> +#include <linux/uaccess.h> struct lkdtm_list { struct list_head node; @@ -67,7 +69,7 @@ void lkdtm_WARNING(void) void lkdtm_EXCEPTION(void) { - *((int *) 0) = 0; + *((volatile int *) 0) = 0; } void lkdtm_LOOP(void) @@ -279,3 +281,12 @@ void lkdtm_CORRUPT_LIST_DEL(void) else pr_err("list_del() corruption not detected!\n"); } + +void lkdtm_CORRUPT_USER_DS(void) +{ + pr_info("setting bad task size limit\n"); + set_fs(KERNEL_DS); + + /* Make sure we do not keep running with a KERNEL_DS! */ + force_sig(SIGKILL, current); +} diff --git a/drivers/misc/lkdtm_core.c b/drivers/misc/lkdtm_core.c index b9a4cd4a9b68..42d2b8e31e6b 100644 --- a/drivers/misc/lkdtm_core.c +++ b/drivers/misc/lkdtm_core.c @@ -199,6 +199,7 @@ struct crashtype crashtypes[] = { CRASHTYPE(OVERFLOW), CRASHTYPE(CORRUPT_LIST_ADD), CRASHTYPE(CORRUPT_LIST_DEL), + CRASHTYPE(CORRUPT_USER_DS), CRASHTYPE(CORRUPT_STACK), CRASHTYPE(UNALIGNED_LOAD_STORE_WRITE), CRASHTYPE(OVERWRITE_ALLOCATION), diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile index 59e6b0aede34..12cceb011a23 100644 --- a/drivers/misc/mei/Makefile +++ b/drivers/misc/mei/Makefile @@ -8,7 +8,6 @@ mei-objs += hbm.o mei-objs += interrupt.o mei-objs += client.o mei-objs += main.o -mei-objs += amthif.o mei-objs += bus.o mei-objs += bus-fixup.o mei-$(CONFIG_DEBUG_FS) += debugfs.o diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c deleted file mode 100644 index 0e7406ccb6dd..000000000000 --- a/drivers/misc/mei/amthif.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * - * Intel Management Engine Interface (Intel MEI) Linux driver - * Copyright (c) 2003-2012, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - -#include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/ioctl.h> -#include <linux/cdev.h> -#include <linux/list.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/uuid.h> -#include <linux/jiffies.h> -#include <linux/uaccess.h> -#include <linux/slab.h> - -#include <linux/mei.h> - -#include "mei_dev.h" -#include "hbm.h" -#include "client.h" - -const uuid_le mei_amthif_guid = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, - 0xac, 0xa8, 0x46, 0xe0, - 0xff, 0x65, 0x81, 0x4c); - -/** - * mei_amthif_reset_params - initializes mei device iamthif - * - * @dev: the device structure - */ -void mei_amthif_reset_params(struct mei_device *dev) -{ - /* reset iamthif parameters. */ - dev->iamthif_canceled = false; - dev->iamthif_state = MEI_IAMTHIF_IDLE; - dev->iamthif_stall_timer = 0; - dev->iamthif_open_count = 0; -} - -/** - * mei_amthif_host_init - mei initialization amthif client. - * - * @dev: the device structure - * @me_cl: me client - * - * Return: 0 on success, <0 on failure. - */ -int mei_amthif_host_init(struct mei_device *dev, struct mei_me_client *me_cl) -{ - struct mei_cl *cl = &dev->iamthif_cl; - int ret; - - mutex_lock(&dev->device_lock); - - if (mei_cl_is_connected(cl)) { - ret = 0; - goto out; - } - - dev->iamthif_state = MEI_IAMTHIF_IDLE; - - mei_cl_init(cl, dev); - - ret = mei_cl_link(cl); - if (ret < 0) { - dev_err(dev->dev, "amthif: failed cl_link %d\n", ret); - goto out; - } - - ret = mei_cl_connect(cl, me_cl, NULL); - -out: - mutex_unlock(&dev->device_lock); - return ret; -} - -/** - * mei_amthif_read_start - queue message for sending read credential - * - * @cl: host client - * @fp: file pointer of message recipient - * - * Return: 0 on success, <0 on failure. - */ -static int mei_amthif_read_start(struct mei_cl *cl, const struct file *fp) -{ - struct mei_device *dev = cl->dev; - struct mei_cl_cb *cb; - - cb = mei_cl_enqueue_ctrl_wr_cb(cl, mei_cl_mtu(cl), MEI_FOP_READ, fp); - if (!cb) - return -ENOMEM; - - cl->rx_flow_ctrl_creds++; - - dev->iamthif_state = MEI_IAMTHIF_READING; - cl->fp = cb->fp; - - return 0; -} - -/** - * mei_amthif_run_next_cmd - send next amt command from queue - * - * @dev: the device structure - * - * Return: 0 on success, <0 on failure. - */ -int mei_amthif_run_next_cmd(struct mei_device *dev) -{ - struct mei_cl *cl = &dev->iamthif_cl; - struct mei_cl_cb *cb; - int ret; - - dev->iamthif_canceled = false; - - dev_dbg(dev->dev, "complete amthif cmd_list cb.\n"); - - cb = list_first_entry_or_null(&dev->amthif_cmd_list, typeof(*cb), list); - if (!cb) { - dev->iamthif_state = MEI_IAMTHIF_IDLE; - cl->fp = NULL; - return 0; - } - - list_del_init(&cb->list); - dev->iamthif_state = MEI_IAMTHIF_WRITING; - cl->fp = cb->fp; - - ret = mei_cl_write(cl, cb); - if (ret < 0) - return ret; - - if (cb->completed) - cb->status = mei_amthif_read_start(cl, cb->fp); - - return 0; -} - -/** - * mei_amthif_write - write amthif data to amthif client - * - * @cl: host client - * @cb: mei call back struct - * - * Return: 0 on success, <0 on failure. - */ -int mei_amthif_write(struct mei_cl *cl, struct mei_cl_cb *cb) -{ - - struct mei_device *dev = cl->dev; - - list_add_tail(&cb->list, &dev->amthif_cmd_list); - - /* - * The previous request is still in processing, queue this one. - */ - if (dev->iamthif_state != MEI_IAMTHIF_IDLE) - return 0; - - return mei_amthif_run_next_cmd(dev); -} - -/** - * mei_amthif_poll - the amthif poll function - * - * @file: pointer to file structure - * @wait: pointer to poll_table structure - * - * Return: poll mask - * - * Locking: called under "dev->device_lock" lock - */ -unsigned int mei_amthif_poll(struct file *file, poll_table *wait) -{ - struct mei_cl *cl = file->private_data; - struct mei_cl_cb *cb = mei_cl_read_cb(cl, file); - unsigned int mask = 0; - - poll_wait(file, &cl->rx_wait, wait); - if (cb) - mask |= POLLIN | POLLRDNORM; - - return mask; -} - -/** - * mei_amthif_irq_write - write iamthif command in irq thread context. - * - * @cl: private data of the file object. - * @cb: callback block. - * @cmpl_list: complete list. - * - * Return: 0, OK; otherwise, error. - */ -int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, - struct list_head *cmpl_list) -{ - int ret; - - ret = mei_cl_irq_write(cl, cb, cmpl_list); - if (ret) - return ret; - - if (cb->completed) - cb->status = mei_amthif_read_start(cl, cb->fp); - - return 0; -} - -/** - * mei_amthif_irq_read_msg - read routine after ISR to - * handle the read amthif message - * - * @cl: mei client - * @mei_hdr: header of amthif message - * @cmpl_list: completed callbacks list - * - * Return: -ENODEV if cb is NULL 0 otherwise; error message is in cb->status - */ -int mei_amthif_irq_read_msg(struct mei_cl *cl, - struct mei_msg_hdr *mei_hdr, - struct list_head *cmpl_list) -{ - struct mei_device *dev; - int ret; - - dev = cl->dev; - - if (dev->iamthif_state != MEI_IAMTHIF_READING) { - mei_irq_discard_msg(dev, mei_hdr); - return 0; - } - - ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list); - if (ret) - return ret; - - if (!mei_hdr->msg_complete) - return 0; - - dev_dbg(dev->dev, "completed amthif read.\n "); - dev->iamthif_stall_timer = 0; - - return 0; -} - -/** - * mei_amthif_complete - complete amthif callback. - * - * @cl: host client - * @cb: callback block. - */ -void mei_amthif_complete(struct mei_cl *cl, struct mei_cl_cb *cb) -{ - struct mei_device *dev = cl->dev; - - dev_dbg(dev->dev, "completing amthif call back.\n"); - switch (cb->fop_type) { - case MEI_FOP_WRITE: - if (!cb->status) { - dev->iamthif_stall_timer = MEI_IAMTHIF_STALL_TIMER; - mei_schedule_stall_timer(dev); - mei_io_cb_free(cb); - return; - } - dev->iamthif_state = MEI_IAMTHIF_IDLE; - cl->fp = NULL; - if (!dev->iamthif_canceled) { - /* - * in case of error enqueue the write cb to complete - * read list so it can be propagated to the reader - */ - list_add_tail(&cb->list, &cl->rd_completed); - wake_up_interruptible(&cl->rx_wait); - } else { - mei_io_cb_free(cb); - } - break; - case MEI_FOP_READ: - if (!dev->iamthif_canceled) { - list_add_tail(&cb->list, &cl->rd_completed); - dev_dbg(dev->dev, "amthif read completed\n"); - wake_up_interruptible(&cl->rx_wait); - } else { - mei_io_cb_free(cb); - } - - dev->iamthif_stall_timer = 0; - mei_amthif_run_next_cmd(dev); - break; - default: - WARN_ON(1); - } -} - -/** -* mei_amthif_release - the release function -* -* @dev: device structure -* @fp: pointer to file structure -* -* Return: 0 on success, <0 on error -*/ -int mei_amthif_release(struct mei_device *dev, struct file *fp) -{ - struct mei_cl *cl = fp->private_data; - - if (dev->iamthif_open_count > 0) - dev->iamthif_open_count--; - - if (cl->fp == fp && dev->iamthif_state != MEI_IAMTHIF_IDLE) { - - dev_dbg(dev->dev, "amthif canceled iamthif state %d\n", - dev->iamthif_state); - dev->iamthif_canceled = true; - } - - /* Don't clean ctrl_rd_list here, the reads has to be completed */ - mei_io_list_free_fp(&dev->amthif_cmd_list, fp); - mei_io_list_free_fp(&cl->rd_completed, fp); - - return 0; -} diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 29f2daed37e0..0208c4b027c5 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -110,12 +110,13 @@ struct mkhi_msg { u8 data[0]; } __packed; +#define MKHI_OSVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \ + sizeof(struct mkhi_fwcaps) + \ + sizeof(struct mei_os_ver)) static int mei_osver(struct mei_cl_device *cldev) { - const size_t size = sizeof(struct mkhi_msg_hdr) + - sizeof(struct mkhi_fwcaps) + - sizeof(struct mei_os_ver); - char buf[size]; + const size_t size = MKHI_OSVER_BUF_LEN; + char buf[MKHI_OSVER_BUF_LEN]; struct mkhi_msg *req; struct mkhi_fwcaps *fwcaps; struct mei_os_ver *os_ver; diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index df5f78ae3d25..d1928fdd0f43 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -1076,12 +1076,6 @@ void mei_cl_bus_rescan_work(struct work_struct *work) { struct mei_device *bus = container_of(work, struct mei_device, bus_rescan_work); - struct mei_me_client *me_cl; - - me_cl = mei_me_cl_by_uuid(bus, &mei_amthif_guid); - if (me_cl) - mei_amthif_host_init(bus, me_cl); - mei_me_cl_put(me_cl); mei_cl_bus_rescan(bus); } diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index d3e3372424d6..be64969d986a 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -428,7 +428,7 @@ static inline void mei_io_list_free_cl(struct list_head *head, * @head: io list * @fp: file pointer (matching cb file object), may be NULL */ -void mei_io_list_free_fp(struct list_head *head, const struct file *fp) +static void mei_io_list_free_fp(struct list_head *head, const struct file *fp) { struct mei_cl_cb *cb, *next; @@ -554,7 +554,7 @@ int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp) * @cl: host client to be initialized * @dev: mei device */ -void mei_cl_init(struct mei_cl *cl, struct mei_device *dev) +static void mei_cl_init(struct mei_cl *cl, struct mei_device *dev) { memset(cl, 0, sizeof(struct mei_cl)); init_waitqueue_head(&cl->wait); @@ -600,7 +600,6 @@ struct mei_cl *mei_cl_allocate(struct mei_device *dev) int mei_cl_link(struct mei_cl *cl) { struct mei_device *dev; - long open_handle_count; int id; if (WARN_ON(!cl || !cl->dev)) @@ -614,8 +613,7 @@ int mei_cl_link(struct mei_cl *cl) return -EMFILE; } - open_handle_count = dev->open_handle_count + dev->iamthif_open_count; - if (open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) { + if (dev->open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) { dev_err(dev->dev, "open_handle_count exceeded %d", MEI_MAX_OPEN_HANDLE_COUNT); return -EMFILE; @@ -649,8 +647,7 @@ int mei_cl_unlink(struct mei_cl *cl) if (!cl) return 0; - /* amthif might not be initialized */ - if (!cl->dev) + if (WARN_ON(!cl->dev)) return 0; dev = cl->dev; @@ -763,7 +760,6 @@ static void mei_cl_set_disconnected(struct mei_cl *cl) mei_io_list_free_cl(&dev->write_waiting_list, cl); mei_io_list_flush_cl(&dev->ctrl_rd_list, cl); mei_io_list_flush_cl(&dev->ctrl_wr_list, cl); - mei_io_list_free_cl(&dev->amthif_cmd_list, cl); mei_cl_wake_all(cl); cl->rx_flow_ctrl_creds = 0; cl->tx_flow_ctrl_creds = 0; @@ -1478,7 +1474,7 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp) return -ENOTTY; } - if (mei_cl_is_fixed_address(cl) || cl == &dev->iamthif_cl) + if (mei_cl_is_fixed_address(cl)) return 0; /* HW currently supports only one pending read */ diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h index 545ae319ba90..5371df4d8af3 100644 --- a/drivers/misc/mei/client.h +++ b/drivers/misc/mei/client.h @@ -83,15 +83,12 @@ static inline u8 mei_me_cl_ver(const struct mei_me_client *me_cl) * MEI IO Functions */ void mei_io_cb_free(struct mei_cl_cb *priv_cb); -void mei_io_list_free_fp(struct list_head *head, const struct file *fp); /* * MEI Host Client Functions */ struct mei_cl *mei_cl_allocate(struct mei_device *dev); -void mei_cl_init(struct mei_cl *cl, struct mei_device *dev); - int mei_cl_link(struct mei_cl *cl); int mei_cl_unlink(struct mei_cl *cl); @@ -205,8 +202,6 @@ int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl, int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb, struct list_head *cmpl_list); int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp); -int mei_cl_irq_read_msg(struct mei_cl *cl, struct mei_msg_hdr *hdr, - struct list_head *cmpl_list); int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb); int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, struct list_head *cmpl_list); diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index ba3a774c8d71..fe6595fe94f1 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -166,9 +166,8 @@ void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len) * * Return: 0 on success, <0 on failure. */ -static inline -int mei_hbm_cl_write(struct mei_device *dev, struct mei_cl *cl, - u8 hbm_cmd, u8 *buf, size_t len) +static inline int mei_hbm_cl_write(struct mei_device *dev, struct mei_cl *cl, + u8 hbm_cmd, void *buf, size_t len) { struct mei_msg_hdr mei_hdr; @@ -632,11 +631,11 @@ static int mei_hbm_stop_req(struct mei_device *dev) */ int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl) { - const size_t len = sizeof(struct hbm_flow_control); - u8 buf[len]; + struct hbm_flow_control req; cl_dbg(dev, cl, "sending flow control\n"); - return mei_hbm_cl_write(dev, cl, MEI_FLOW_CONTROL_CMD, buf, len); + return mei_hbm_cl_write(dev, cl, MEI_FLOW_CONTROL_CMD, + &req, sizeof(req)); } /** @@ -710,10 +709,10 @@ static void mei_hbm_cl_tx_flow_ctrl_creds_res(struct mei_device *dev, */ int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) { - const size_t len = sizeof(struct hbm_client_connect_request); - u8 buf[len]; + struct hbm_client_connect_request req; - return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_REQ_CMD, buf, len); + return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_REQ_CMD, + &req, sizeof(req)); } /** @@ -726,10 +725,10 @@ int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) */ int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl) { - const size_t len = sizeof(struct hbm_client_connect_response); - u8 buf[len]; + struct hbm_client_connect_response resp; - return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_RES_CMD, buf, len); + return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_RES_CMD, + &resp, sizeof(resp)); } /** @@ -763,10 +762,10 @@ static void mei_hbm_cl_disconnect_res(struct mei_device *dev, struct mei_cl *cl, */ int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl) { - const size_t len = sizeof(struct hbm_client_connect_request); - u8 buf[len]; + struct hbm_client_connect_request req; - return mei_hbm_cl_write(dev, cl, CLIENT_CONNECT_REQ_CMD, buf, len); + return mei_hbm_cl_write(dev, cl, CLIENT_CONNECT_REQ_CMD, + &req, sizeof(req)); } /** diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 13c55b8f9261..c8ad9ee7cb80 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -146,18 +146,9 @@ int mei_reset(struct mei_device *dev) /* fall through and remove the sw state even if hw reset has failed */ /* no need to clean up software state in case of power up */ - if (state != MEI_DEV_INITIALIZING && - state != MEI_DEV_POWER_UP) { - - /* remove all waiting requests */ + if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP) mei_cl_all_disconnect(dev); - /* remove entry if already in list */ - dev_dbg(dev->dev, "remove iamthif from the file list.\n"); - mei_cl_unlink(&dev->iamthif_cl); - mei_amthif_reset_params(dev); - } - mei_hbm_reset(dev); dev->rd_msg_hdr = 0; @@ -401,9 +392,6 @@ void mei_device_init(struct mei_device *dev, INIT_WORK(&dev->reset_work, mei_reset_work); INIT_WORK(&dev->bus_rescan_work, mei_cl_bus_rescan_work); - INIT_LIST_HEAD(&dev->iamthif_cl.link); - INIT_LIST_HEAD(&dev->amthif_cmd_list); - bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX); dev->open_handle_count = 0; diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 406e9e2b2fff..c14e35201721 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -47,10 +47,7 @@ void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list) list_del_init(&cb->list); dev_dbg(dev->dev, "completing call back.\n"); - if (cl == &dev->iamthif_cl) - mei_amthif_complete(cl, cb); - else - mei_cl_complete(cl, cb); + mei_cl_complete(cl, cb); } } EXPORT_SYMBOL_GPL(mei_irq_compl_handler); @@ -76,7 +73,7 @@ static inline int mei_cl_hbm_equal(struct mei_cl *cl, * @dev: mei device * @hdr: message header */ -void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr) +static void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr) { /* * no need to check for size as it is guarantied @@ -96,9 +93,9 @@ void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr) * * Return: always 0 */ -int mei_cl_irq_read_msg(struct mei_cl *cl, - struct mei_msg_hdr *mei_hdr, - struct list_head *cmpl_list) +static int mei_cl_irq_read_msg(struct mei_cl *cl, + struct mei_msg_hdr *mei_hdr, + struct list_head *cmpl_list) { struct mei_device *dev = cl->dev; struct mei_cl_cb *cb; @@ -313,11 +310,7 @@ int mei_irq_read_handler(struct mei_device *dev, goto end; } - if (cl == &dev->iamthif_cl) { - ret = mei_amthif_irq_read_msg(cl, mei_hdr, cmpl_list); - } else { - ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list); - } + ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list); reset_slots: @@ -423,10 +416,7 @@ int mei_irq_write_handler(struct mei_device *dev, struct list_head *cmpl_list) dev_dbg(dev->dev, "complete write list cb.\n"); list_for_each_entry_safe(cb, next, &dev->write_list, list) { cl = cb->cl; - if (cl == &dev->iamthif_cl) - ret = mei_amthif_irq_write(cl, cb, cmpl_list); - else - ret = mei_cl_irq_write(cl, cb, cmpl_list); + ret = mei_cl_irq_write(cl, cb, cmpl_list); if (ret) return ret; } @@ -512,20 +502,6 @@ void mei_timer(struct work_struct *work) } } - if (!mei_cl_is_connected(&dev->iamthif_cl)) - goto out; - - if (dev->iamthif_stall_timer) { - if (--dev->iamthif_stall_timer == 0) { - dev_err(dev->dev, "timer: amthif hanged.\n"); - mei_reset(dev); - - mei_amthif_run_next_cmd(dev); - goto out; - } - reschedule_timer = true; - } - out: if (dev->dev_state != MEI_DEV_DISABLED && reschedule_timer) mei_schedule_stall_timer(dev); diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index bf816449cd40..e825f013e54e 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -103,10 +103,7 @@ static int mei_release(struct inode *inode, struct file *file) dev = cl->dev; mutex_lock(&dev->device_lock); - if (cl == &dev->iamthif_cl) { - rets = mei_amthif_release(dev, file); - goto out; - } + rets = mei_cl_disconnect(cl); mei_cl_flush_queues(cl, file); @@ -117,7 +114,7 @@ static int mei_release(struct inode *inode, struct file *file) file->private_data = NULL; kfree(cl); -out: + mutex_unlock(&dev->device_lock); return rets; } @@ -182,8 +179,6 @@ static ssize_t mei_read(struct file *file, char __user *ubuf, goto out; } - -again: mutex_unlock(&dev->device_lock); if (wait_event_interruptible(cl->rx_wait, !list_empty(&cl->rd_completed) || @@ -201,14 +196,6 @@ again: cb = mei_cl_read_cb(cl, file); if (!cb) { - /* - * For amthif all the waiters are woken up, - * but only fp with matching cb->fp get the cb, - * the others have to return to wait on read. - */ - if (cl == &dev->iamthif_cl) - goto again; - rets = 0; goto out; } @@ -319,13 +306,6 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, goto out; } - if (cl == &dev->iamthif_cl) { - rets = mei_amthif_write(cl, cb); - if (!rets) - rets = length; - goto out; - } - rets = mei_cl_write(cl, cb); out: mutex_unlock(&dev->device_lock); @@ -388,30 +368,6 @@ static int mei_ioctl_connect_client(struct file *file, dev_dbg(dev->dev, "FW Client - Max Msg Len = %d\n", me_cl->props.max_msg_length); - /* if we're connecting to amthif client then we will use the - * existing connection - */ - if (uuid_le_cmp(data->in_client_uuid, mei_amthif_guid) == 0) { - dev_dbg(dev->dev, "FW Client is amthi\n"); - if (!mei_cl_is_connected(&dev->iamthif_cl)) { - rets = -ENODEV; - goto end; - } - mei_cl_unlink(cl); - - kfree(cl); - cl = NULL; - dev->iamthif_open_count++; - file->private_data = &dev->iamthif_cl; - - client = &data->out_client_properties; - client->max_msg_length = me_cl->props.max_msg_length; - client->protocol_version = me_cl->props.protocol_version; - rets = dev->iamthif_cl.status; - - goto end; - } - /* prepare the output buffer */ client = &data->out_client_properties; client->max_msg_length = me_cl->props.max_msg_length; @@ -615,11 +571,6 @@ static unsigned int mei_poll(struct file *file, poll_table *wait) mask |= POLLPRI; } - if (cl == &dev->iamthif_cl) { - mask |= mei_amthif_poll(file, wait); - goto out; - } - if (req_events & (POLLIN | POLLRDNORM)) { poll_wait(file, &cl->rx_wait, wait); @@ -635,6 +586,77 @@ out: } /** + * mei_cl_is_write_queued - check if the client has pending writes. + * + * @cl: writing host client + * + * Return: true if client is writing, false otherwise. + */ +static bool mei_cl_is_write_queued(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + struct mei_cl_cb *cb; + + list_for_each_entry(cb, &dev->write_list, list) + if (cb->cl == cl) + return true; + list_for_each_entry(cb, &dev->write_waiting_list, list) + if (cb->cl == cl) + return true; + return false; +} + +/** + * mei_fsync - the fsync handler + * + * @fp: pointer to file structure + * @start: unused + * @end: unused + * @datasync: unused + * + * Return: 0 on success, -ENODEV if client is not connected + */ +static int mei_fsync(struct file *fp, loff_t start, loff_t end, int datasync) +{ + struct mei_cl *cl = fp->private_data; + struct mei_device *dev; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + mutex_lock(&dev->device_lock); + + if (dev->dev_state != MEI_DEV_ENABLED || !mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + + while (mei_cl_is_write_queued(cl)) { + mutex_unlock(&dev->device_lock); + rets = wait_event_interruptible(cl->tx_wait, + cl->writing_state == MEI_WRITE_COMPLETE || + !mei_cl_is_connected(cl)); + mutex_lock(&dev->device_lock); + if (rets) { + if (signal_pending(current)) + rets = -EINTR; + goto out; + } + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + } + rets = 0; +out: + mutex_unlock(&dev->device_lock); + return rets; +} + +/** * mei_fasync - asynchronous io support * * @fd: file descriptor @@ -749,6 +771,7 @@ static const struct file_operations mei_fops = { .release = mei_release, .write = mei_write, .poll = mei_poll, + .fsync = mei_fsync, .fasync = mei_fasync, .llseek = no_llseek }; diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index d41aac53a2ac..63a67c99fc78 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -26,12 +26,6 @@ #include "hw.h" #include "hbm.h" - -/* - * AMTHI Client UUID - */ -extern const uuid_le mei_amthif_guid; - #define MEI_RD_MSG_BUF_SIZE (128 * sizeof(u32)) /* @@ -78,12 +72,6 @@ enum mei_dev_state { const char *mei_dev_state_str(int state); -enum iamthif_states { - MEI_IAMTHIF_IDLE, - MEI_IAMTHIF_WRITING, - MEI_IAMTHIF_READING, -}; - enum mei_file_transaction_states { MEI_IDLE, MEI_WRITING, @@ -418,13 +406,6 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @allow_fixed_address: allow user space to connect a fixed client * @override_fixed_address: force allow fixed address behavior * - * @amthif_cmd_list : amthif list for cmd waiting - * @iamthif_cl : amthif host client - * @iamthif_open_count : number of opened amthif connections - * @iamthif_stall_timer : timer to detect amthif hang - * @iamthif_state : amthif processor state - * @iamthif_canceled : current amthif command is canceled - * * @reset_work : work item for the device reset * @bus_rescan_work : work item for the bus rescan * @@ -500,14 +481,6 @@ struct mei_device { bool allow_fixed_address; bool override_fixed_address; - /* amthif list for cmd waiting */ - struct list_head amthif_cmd_list; - struct mei_cl iamthif_cl; - long iamthif_open_count; - u32 iamthif_stall_timer; - enum iamthif_states iamthif_state; - bool iamthif_canceled; - struct work_struct reset_work; struct work_struct bus_rescan_work; @@ -579,28 +552,6 @@ int mei_irq_write_handler(struct mei_device *dev, struct list_head *cmpl_list); void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list); /* - * AMTHIF - AMT Host Interface Functions - */ -void mei_amthif_reset_params(struct mei_device *dev); - -int mei_amthif_host_init(struct mei_device *dev, struct mei_me_client *me_cl); - -unsigned int mei_amthif_poll(struct file *file, poll_table *wait); - -int mei_amthif_release(struct mei_device *dev, struct file *file); - -int mei_amthif_write(struct mei_cl *cl, struct mei_cl_cb *cb); -int mei_amthif_run_next_cmd(struct mei_device *dev); -int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, - struct list_head *cmpl_list); - -void mei_amthif_complete(struct mei_cl *cl, struct mei_cl_cb *cb); -int mei_amthif_irq_read_msg(struct mei_cl *cl, - struct mei_msg_hdr *mei_hdr, - struct list_head *cmpl_list); -int mei_amthif_irq_read(struct mei_device *dev, s32 *slots); - -/* * Register Access Function */ @@ -711,8 +662,6 @@ bool mei_hbuf_acquire(struct mei_device *dev); bool mei_write_is_idle(struct mei_device *dev); -void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr); - #if IS_ENABLED(CONFIG_DEBUG_FS) int mei_dbgfs_register(struct mei_device *dev, const char *name); void mei_dbgfs_deregister(struct mei_device *dev); diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 0a668fdfbbe9..8621a198a2ce 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -242,11 +242,38 @@ end: } /** + * mei_me_shutdown - Device Removal Routine + * + * @pdev: PCI device structure + * + * mei_me_shutdown is called from the reboot notifier + * it's a simplified version of remove so we go down + * faster. + */ +static void mei_me_shutdown(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + dev_dbg(&pdev->dev, "shutdown\n"); + mei_stop(dev); + + if (!pci_dev_run_wake(pdev)) + mei_me_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +} + +/** * mei_me_remove - Device Removal Routine * * @pdev: PCI device structure * - * mei_remove is called by the PCI subsystem to alert the driver + * mei_me_remove is called by the PCI subsystem to alert the driver * that it should release a PCI device. */ static void mei_me_remove(struct pci_dev *pdev) @@ -456,7 +483,7 @@ static struct pci_driver mei_me_driver = { .id_table = mei_me_pci_tbl, .probe = mei_me_probe, .remove = mei_me_remove, - .shutdown = mei_me_remove, + .shutdown = mei_me_shutdown, .driver.pm = MEI_ME_PM_OPS, }; diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c index fe088b40daf9..f811cd524468 100644 --- a/drivers/misc/mei/pci-txe.c +++ b/drivers/misc/mei/pci-txe.c @@ -161,6 +161,33 @@ end: } /** + * mei_txe_remove - Device Shutdown Routine + * + * @pdev: PCI device structure + * + * mei_txe_shutdown is called from the reboot notifier + * it's a simplified version of remove so we go down + * faster. + */ +static void mei_txe_shutdown(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + dev_dbg(&pdev->dev, "shutdown\n"); + mei_stop(dev); + + if (!pci_dev_run_wake(pdev)) + mei_txe_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +} + +/** * mei_txe_remove - Device Removal Routine * * @pdev: PCI device structure @@ -386,7 +413,7 @@ static struct pci_driver mei_txe_driver = { .id_table = mei_txe_pci_tbl, .probe = mei_txe_probe, .remove = mei_txe_remove, - .shutdown = mei_txe_remove, + .shutdown = mei_txe_shutdown, .driver.pm = MEI_TXE_PM_OPS, }; diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c index 87a13374fdc0..adf46072cb37 100644 --- a/drivers/misc/tsl2550.c +++ b/drivers/misc/tsl2550.c @@ -443,9 +443,16 @@ static const struct i2c_device_id tsl2550_id[] = { }; MODULE_DEVICE_TABLE(i2c, tsl2550_id); +static const struct of_device_id tsl2550_of_match[] = { + { .compatible = "taos,tsl2550" }, + { } +}; +MODULE_DEVICE_TABLE(of, tsl2550_of_match); + static struct i2c_driver tsl2550_driver = { .driver = { .name = TSL2550_DRV_NAME, + .of_match_table = tsl2550_of_match, .pm = TSL2550_PM_OPS, }, .probe = tsl2550_probe, diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 77513195f50e..8bae3731d039 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -421,41 +421,6 @@ static void dev_release(struct device *dev) } /** - * ubi_sysfs_init - initialize sysfs for an UBI device. - * @ubi: UBI device description object - * @ref: set to %1 on exit in case of failure if a reference to @ubi->dev was - * taken - * - * This function returns zero in case of success and a negative error code in - * case of failure. - */ -static int ubi_sysfs_init(struct ubi_device *ubi, int *ref) -{ - int err; - - ubi->dev.release = dev_release; - ubi->dev.devt = ubi->cdev.dev; - ubi->dev.class = &ubi_class; - ubi->dev.groups = ubi_dev_groups; - dev_set_name(&ubi->dev, UBI_NAME_STR"%d", ubi->ubi_num); - err = device_register(&ubi->dev); - if (err) - return err; - - *ref = 1; - return 0; -} - -/** - * ubi_sysfs_close - close sysfs for an UBI device. - * @ubi: UBI device description object - */ -static void ubi_sysfs_close(struct ubi_device *ubi) -{ - device_unregister(&ubi->dev); -} - -/** * kill_volumes - destroy all user volumes. * @ubi: UBI device description object */ @@ -471,27 +436,19 @@ static void kill_volumes(struct ubi_device *ubi) /** * uif_init - initialize user interfaces for an UBI device. * @ubi: UBI device description object - * @ref: set to %1 on exit in case of failure if a reference to @ubi->dev was - * taken, otherwise set to %0 * * This function initializes various user interfaces for an UBI device. If the * initialization fails at an early stage, this function frees all the - * resources it allocated, returns an error, and @ref is set to %0. However, - * if the initialization fails after the UBI device was registered in the - * driver core subsystem, this function takes a reference to @ubi->dev, because - * otherwise the release function ('dev_release()') would free whole @ubi - * object. The @ref argument is set to %1 in this case. The caller has to put - * this reference. + * resources it allocated, returns an error. * * This function returns zero in case of success and a negative error code in * case of failure. */ -static int uif_init(struct ubi_device *ubi, int *ref) +static int uif_init(struct ubi_device *ubi) { int i, err; dev_t dev; - *ref = 0; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); /* @@ -508,20 +465,17 @@ static int uif_init(struct ubi_device *ubi, int *ref) return err; } + ubi->dev.devt = dev; + ubi_assert(MINOR(dev) == 0); cdev_init(&ubi->cdev, &ubi_cdev_operations); dbg_gen("%s major is %u", ubi->ubi_name, MAJOR(dev)); ubi->cdev.owner = THIS_MODULE; - err = cdev_add(&ubi->cdev, dev, 1); - if (err) { - ubi_err(ubi, "cannot add character device"); - goto out_unreg; - } - - err = ubi_sysfs_init(ubi, ref); + dev_set_name(&ubi->dev, UBI_NAME_STR "%d", ubi->ubi_num); + err = cdev_device_add(&ubi->cdev, &ubi->dev); if (err) - goto out_sysfs; + goto out_unreg; for (i = 0; i < ubi->vtbl_slots; i++) if (ubi->volumes[i]) { @@ -536,11 +490,7 @@ static int uif_init(struct ubi_device *ubi, int *ref) out_volumes: kill_volumes(ubi); -out_sysfs: - if (*ref) - get_device(&ubi->dev); - ubi_sysfs_close(ubi); - cdev_del(&ubi->cdev); + cdev_device_del(&ubi->cdev, &ubi->dev); out_unreg: unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err(ubi, "cannot initialize UBI %s, error %d", @@ -559,8 +509,7 @@ out_unreg: static void uif_close(struct ubi_device *ubi) { kill_volumes(ubi); - ubi_sysfs_close(ubi); - cdev_del(&ubi->cdev); + cdev_device_del(&ubi->cdev, &ubi->dev); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); } @@ -857,7 +806,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset, int max_beb_per1024) { struct ubi_device *ubi; - int i, err, ref = 0; + int i, err; if (max_beb_per1024 < 0 || max_beb_per1024 > MAX_MTD_UBI_BEB_LIMIT) return -EINVAL; @@ -919,6 +868,11 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, if (!ubi) return -ENOMEM; + device_initialize(&ubi->dev); + ubi->dev.release = dev_release; + ubi->dev.class = &ubi_class; + ubi->dev.groups = ubi_dev_groups; + ubi->mtd = mtd; ubi->ubi_num = ubi_num; ubi->vid_hdr_offset = vid_hdr_offset; @@ -995,7 +949,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, /* Make device "available" before it becomes accessible via sysfs */ ubi_devices[ubi_num] = ubi; - err = uif_init(ubi, &ref); + err = uif_init(ubi); if (err) goto out_detach; @@ -1045,8 +999,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, out_debugfs: ubi_debugfs_exit_dev(ubi); out_uif: - get_device(&ubi->dev); - ubi_assert(ref); uif_close(ubi); out_detach: ubi_devices[ubi_num] = NULL; @@ -1056,10 +1008,7 @@ out_detach: out_free: vfree(ubi->peb_buf); vfree(ubi->fm_buf); - if (ref) - put_device(&ubi->dev); - else - kfree(ubi); + put_device(&ubi->dev); return err; } @@ -1120,12 +1069,6 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); - /* - * Get a reference to the device in order to prevent 'dev_release()' - * from freeing the @ubi object. - */ - get_device(&ubi->dev); - ubi_debugfs_exit_dev(ubi); uif_close(ubi); diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 7ac78c13dd1c..85237cf661f9 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -155,11 +155,10 @@ static void vol_release(struct device *dev) */ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) { - int i, err, vol_id = req->vol_id, do_free = 1; + int i, err, vol_id = req->vol_id; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; struct ubi_eba_table *eba_tbl = NULL; - dev_t dev; if (ubi->ro_mode) return -EROFS; @@ -168,6 +167,12 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) if (!vol) return -ENOMEM; + device_initialize(&vol->dev); + vol->dev.release = vol_release; + vol->dev.parent = &ubi->dev; + vol->dev.class = &ubi_class; + vol->dev.groups = volume_dev_groups; + spin_lock(&ubi->volumes_lock); if (vol_id == UBI_VOL_NUM_AUTO) { /* Find unused volume ID */ @@ -268,24 +273,13 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Register character device for the volume */ cdev_init(&vol->cdev, &ubi_vol_cdev_operations); vol->cdev.owner = THIS_MODULE; - dev = MKDEV(MAJOR(ubi->cdev.dev), vol_id + 1); - err = cdev_add(&vol->cdev, dev, 1); - if (err) { - ubi_err(ubi, "cannot add character device"); - goto out_mapping; - } - - vol->dev.release = vol_release; - vol->dev.parent = &ubi->dev; - vol->dev.devt = dev; - vol->dev.class = &ubi_class; - vol->dev.groups = volume_dev_groups; + vol->dev.devt = MKDEV(MAJOR(ubi->cdev.dev), vol_id + 1); dev_set_name(&vol->dev, "%s_%d", ubi->ubi_name, vol->vol_id); - err = device_register(&vol->dev); + err = cdev_device_add(&vol->cdev, &vol->dev); if (err) { - ubi_err(ubi, "cannot register device"); - goto out_cdev; + ubi_err(ubi, "cannot add device"); + goto out_mapping; } /* Fill volume table record */ @@ -318,28 +312,17 @@ out_sysfs: * We have registered our device, we should not free the volume * description object in this function in case of an error - it is * freed by the release function. - * - * Get device reference to prevent the release function from being - * called just after sysfs has been closed. */ - do_free = 0; - get_device(&vol->dev); - device_unregister(&vol->dev); -out_cdev: - cdev_del(&vol->cdev); + cdev_device_del(&vol->cdev, &vol->dev); out_mapping: - if (do_free) - ubi_eba_destroy_table(eba_tbl); + ubi_eba_destroy_table(eba_tbl); out_acc: spin_lock(&ubi->volumes_lock); ubi->rsvd_pebs -= vol->reserved_pebs; ubi->avail_pebs += vol->reserved_pebs; out_unlock: spin_unlock(&ubi->volumes_lock); - if (do_free) - kfree(vol); - else - put_device(&vol->dev); + put_device(&vol->dev); ubi_err(ubi, "cannot create volume %d, error %d", vol_id, err); return err; } @@ -391,8 +374,8 @@ int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl) goto out_err; } - cdev_del(&vol->cdev); - device_unregister(&vol->dev); + cdev_device_del(&vol->cdev, &vol->dev); + put_device(&vol->dev); spin_lock(&ubi->volumes_lock); ubi->rsvd_pebs -= reserved_pebs; diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 650f1b1797ad..101ced4c84be 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -13,6 +13,17 @@ menuconfig NVMEM if NVMEM +config NVMEM_IMX_IIM + tristate "i.MX IC Identification Module support" + depends on ARCH_MXC || COMPILE_TEST + help + This is a driver for the IC Identification Module (IIM) available on + i.MX SoCs, providing access to 4 Kbits of programmable + eFuses. + + This driver can also be built as a module. If so, the module + will be called nvmem-imx-iim. + config NVMEM_IMX_OCOTP tristate "i.MX6 On-Chip OTP Controller support" depends on SOC_IMX6 || COMPILE_TEST diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 86e45995fdad..173140658693 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -8,6 +8,8 @@ nvmem_core-y := core.o # Devices obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o nvmem-bcm-ocotp-y := bcm-ocotp.o +obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o +nvmem-imx-iim-y := imx-iim.o obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o nvmem-imx-ocotp-y := imx-ocotp.o obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 408b521ee520..8c830a80a648 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -468,7 +468,8 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) np = config->dev->of_node; nvmem->dev.of_node = np; dev_set_name(&nvmem->dev, "%s%d", - config->name ? : "nvmem", config->id); + config->name ? : "nvmem", + config->name ? config->id : nvmem->id); nvmem->read_only = of_property_read_bool(np, "read-only") | config->read_only; diff --git a/drivers/nvmem/imx-iim.c b/drivers/nvmem/imx-iim.c new file mode 100644 index 000000000000..52ff65e0673f --- /dev/null +++ b/drivers/nvmem/imx-iim.c @@ -0,0 +1,173 @@ +/* + * i.MX IIM driver + * + * Copyright (c) 2017 Pengutronix, Michael Grzeschik <m.grzeschik@pengutronix.de> + * + * Based on the barebox iim driver, + * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>, + * Orex Computed Radiography + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/clk.h> + +#define IIM_BANK_BASE(n) (0x800 + 0x400 * (n)) + +struct imx_iim_drvdata { + unsigned int nregs; +}; + +struct iim_priv { + void __iomem *base; + struct clk *clk; + struct nvmem_config nvmem; +}; + +static int imx_iim_read(void *context, unsigned int offset, + void *buf, size_t bytes) +{ + struct iim_priv *iim = context; + int i, ret; + u8 *buf8 = buf; + + ret = clk_prepare_enable(iim->clk); + if (ret) + return ret; + + for (i = offset; i < offset + bytes; i++) { + int bank = i >> 5; + int reg = i & 0x1f; + + *buf8++ = readl(iim->base + IIM_BANK_BASE(bank) + reg * 4); + } + + clk_disable_unprepare(iim->clk); + + return 0; +} + +static struct imx_iim_drvdata imx27_drvdata = { + .nregs = 2 * 32, +}; + +static struct imx_iim_drvdata imx25_imx31_imx35_drvdata = { + .nregs = 3 * 32, +}; + +static struct imx_iim_drvdata imx51_drvdata = { + .nregs = 4 * 32, +}; + +static struct imx_iim_drvdata imx53_drvdata = { + .nregs = 4 * 32 + 16, +}; + +static const struct of_device_id imx_iim_dt_ids[] = { + { + .compatible = "fsl,imx25-iim", + .data = &imx25_imx31_imx35_drvdata, + }, { + .compatible = "fsl,imx27-iim", + .data = &imx27_drvdata, + }, { + .compatible = "fsl,imx31-iim", + .data = &imx25_imx31_imx35_drvdata, + }, { + .compatible = "fsl,imx35-iim", + .data = &imx25_imx31_imx35_drvdata, + }, { + .compatible = "fsl,imx51-iim", + .data = &imx51_drvdata, + }, { + .compatible = "fsl,imx53-iim", + .data = &imx53_drvdata, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, imx_iim_dt_ids); + +static int imx_iim_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct device *dev = &pdev->dev; + struct resource *res; + struct iim_priv *iim; + struct nvmem_device *nvmem; + struct nvmem_config *cfg; + const struct imx_iim_drvdata *drvdata = NULL; + + iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL); + if (!iim) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iim->base = devm_ioremap_resource(dev, res); + if (IS_ERR(iim->base)) + return PTR_ERR(iim->base); + + of_id = of_match_device(imx_iim_dt_ids, dev); + if (!of_id) + return -ENODEV; + + drvdata = of_id->data; + + iim->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(iim->clk)) + return PTR_ERR(iim->clk); + + cfg = &iim->nvmem; + + cfg->name = "imx-iim", + cfg->read_only = true, + cfg->word_size = 1, + cfg->stride = 1, + cfg->owner = THIS_MODULE, + cfg->reg_read = imx_iim_read, + cfg->dev = dev; + cfg->size = drvdata->nregs; + cfg->priv = iim; + + nvmem = nvmem_register(cfg); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int imx_iim_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static struct platform_driver imx_iim_driver = { + .probe = imx_iim_probe, + .remove = imx_iim_remove, + .driver = { + .name = "imx-iim", + .of_match_table = imx_iim_dt_ids, + }, +}; +module_platform_driver(imx_iim_driver); + +MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>"); +MODULE_DESCRIPTION("i.MX IIM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index b8ca1e677b01..193ca8fd350a 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -7,6 +7,9 @@ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>, * Orex Computed Radiography * + * Write support based on the fsl_otp driver, + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 * as published by the Free Software Foundation. @@ -24,14 +27,88 @@ #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/delay.h> + +#define IMX_OCOTP_OFFSET_B0W0 0x400 /* Offset from base address of the + * OTP Bank0 Word0 + */ +#define IMX_OCOTP_OFFSET_PER_WORD 0x10 /* Offset between the start addr + * of two consecutive OTP words. + */ + +#define IMX_OCOTP_ADDR_CTRL 0x0000 +#define IMX_OCOTP_ADDR_CTRL_SET 0x0004 +#define IMX_OCOTP_ADDR_CTRL_CLR 0x0008 +#define IMX_OCOTP_ADDR_TIMING 0x0010 +#define IMX_OCOTP_ADDR_DATA 0x0020 + +#define IMX_OCOTP_BM_CTRL_ADDR 0x0000007F +#define IMX_OCOTP_BM_CTRL_BUSY 0x00000100 +#define IMX_OCOTP_BM_CTRL_ERROR 0x00000200 +#define IMX_OCOTP_BM_CTRL_REL_SHADOWS 0x00000400 + +#define DEF_RELAX 20 /* > 16.5ns */ +#define IMX_OCOTP_WR_UNLOCK 0x3E770000 +#define IMX_OCOTP_READ_LOCKED_VAL 0xBADABADA + +static DEFINE_MUTEX(ocotp_mutex); struct ocotp_priv { struct device *dev; struct clk *clk; void __iomem *base; unsigned int nregs; + struct nvmem_config *config; }; +static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags) +{ + int count; + u32 c, mask; + + mask = IMX_OCOTP_BM_CTRL_BUSY | IMX_OCOTP_BM_CTRL_ERROR | flags; + + for (count = 10000; count >= 0; count--) { + c = readl(base + IMX_OCOTP_ADDR_CTRL); + if (!(c & mask)) + break; + cpu_relax(); + } + + if (count < 0) { + /* HW_OCOTP_CTRL[ERROR] will be set under the following + * conditions: + * - A write is performed to a shadow register during a shadow + * reload (essentially, while HW_OCOTP_CTRL[RELOAD_SHADOWS] is + * set. In addition, the contents of the shadow register shall + * not be updated. + * - A write is performed to a shadow register which has been + * locked. + * - A read is performed to from a shadow register which has + * been read locked. + * - A program is performed to a fuse word which has been locked + * - A read is performed to from a fuse word which has been read + * locked. + */ + if (c & IMX_OCOTP_BM_CTRL_ERROR) + return -EPERM; + return -ETIMEDOUT; + } + + return 0; +} + +static void imx_ocotp_clr_err_if_set(void __iomem *base) +{ + u32 c; + + c = readl(base + IMX_OCOTP_ADDR_CTRL); + if (!(c & IMX_OCOTP_BM_CTRL_ERROR)) + return; + + writel(IMX_OCOTP_BM_CTRL_ERROR, base + IMX_OCOTP_ADDR_CTRL_CLR); +} + static int imx_ocotp_read(void *context, unsigned int offset, void *val, size_t bytes) { @@ -47,26 +124,188 @@ static int imx_ocotp_read(void *context, unsigned int offset, if (count > (priv->nregs - index)) count = priv->nregs - index; + mutex_lock(&ocotp_mutex); + ret = clk_prepare_enable(priv->clk); if (ret < 0) { + mutex_unlock(&ocotp_mutex); dev_err(priv->dev, "failed to prepare/enable ocotp clk\n"); return ret; } - for (i = index; i < (index + count); i++) - *buf++ = readl(priv->base + 0x400 + i * 0x10); + ret = imx_ocotp_wait_for_busy(priv->base, 0); + if (ret < 0) { + dev_err(priv->dev, "timeout during read setup\n"); + goto read_end; + } + + for (i = index; i < (index + count); i++) { + *buf++ = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 + + i * IMX_OCOTP_OFFSET_PER_WORD); + + /* 47.3.1.2 + * For "read locked" registers 0xBADABADA will be returned and + * HW_OCOTP_CTRL[ERROR] will be set. It must be cleared by + * software before any new write, read or reload access can be + * issued + */ + if (*(buf - 1) == IMX_OCOTP_READ_LOCKED_VAL) + imx_ocotp_clr_err_if_set(priv->base); + } + ret = 0; + +read_end: clk_disable_unprepare(priv->clk); + mutex_unlock(&ocotp_mutex); + return ret; +} - return 0; +static int imx_ocotp_write(void *context, unsigned int offset, void *val, + size_t bytes) +{ + struct ocotp_priv *priv = context; + u32 *buf = val; + int ret; + + unsigned long clk_rate = 0; + unsigned long strobe_read, relax, strobe_prog; + u32 timing = 0; + u32 ctrl; + u8 waddr; + + /* allow only writing one complete OTP word at a time */ + if ((bytes != priv->config->word_size) || + (offset % priv->config->word_size)) + return -EINVAL; + + mutex_lock(&ocotp_mutex); + + ret = clk_prepare_enable(priv->clk); + if (ret < 0) { + mutex_unlock(&ocotp_mutex); + dev_err(priv->dev, "failed to prepare/enable ocotp clk\n"); + return ret; + } + + /* 47.3.1.3.1 + * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX] + * fields with timing values to match the current frequency of the + * ipg_clk. OTP writes will work at maximum bus frequencies as long + * as the HW_OCOTP_TIMING parameters are set correctly. + */ + clk_rate = clk_get_rate(priv->clk); + + relax = clk_rate / (1000000000 / DEF_RELAX) - 1; + strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1; + strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1; + + timing = strobe_prog & 0x00000FFF; + timing |= (relax << 12) & 0x0000F000; + timing |= (strobe_read << 16) & 0x003F0000; + + writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING); + + /* 47.3.1.3.2 + * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear. + * Overlapped accesses are not supported by the controller. Any pending + * write or reload must be completed before a write access can be + * requested. + */ + ret = imx_ocotp_wait_for_busy(priv->base, 0); + if (ret < 0) { + dev_err(priv->dev, "timeout during timing setup\n"); + goto write_end; + } + + /* 47.3.1.3.3 + * Write the requested address to HW_OCOTP_CTRL[ADDR] and program the + * unlock code into HW_OCOTP_CTRL[WR_UNLOCK]. This must be programmed + * for each write access. The lock code is documented in the register + * description. Both the unlock code and address can be written in the + * same operation. + */ + /* OTP write/read address specifies one of 128 word address locations */ + waddr = offset / 4; + + ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL); + ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR; + ctrl |= waddr & IMX_OCOTP_BM_CTRL_ADDR; + ctrl |= IMX_OCOTP_WR_UNLOCK; + + writel(ctrl, priv->base + IMX_OCOTP_ADDR_CTRL); + + /* 47.3.1.3.4 + * Write the data to the HW_OCOTP_DATA register. This will automatically + * set HW_OCOTP_CTRL[BUSY] and clear HW_OCOTP_CTRL[WR_UNLOCK]. To + * protect programming same OTP bit twice, before program OCOTP will + * automatically read fuse value in OTP and use read value to mask + * program data. The controller will use masked program data to program + * a 32-bit word in the OTP per the address in HW_OCOTP_CTRL[ADDR]. Bit + * fields with 1's will result in that OTP bit being programmed. Bit + * fields with 0's will be ignored. At the same time that the write is + * accepted, the controller makes an internal copy of + * HW_OCOTP_CTRL[ADDR] which cannot be updated until the next write + * sequence is initiated. This copy guarantees that erroneous writes to + * HW_OCOTP_CTRL[ADDR] will not affect an active write operation. It + * should also be noted that during the programming HW_OCOTP_DATA will + * shift right (with zero fill). This shifting is required to program + * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be + * modified. + */ + writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA); + + /* 47.4.1.4.5 + * Once complete, the controller will clear BUSY. A write request to a + * protected or locked region will result in no OTP access and no + * setting of HW_OCOTP_CTRL[BUSY]. In addition HW_OCOTP_CTRL[ERROR] will + * be set. It must be cleared by software before any new write access + * can be issued. + */ + ret = imx_ocotp_wait_for_busy(priv->base, 0); + if (ret < 0) { + if (ret == -EPERM) { + dev_err(priv->dev, "failed write to locked region"); + imx_ocotp_clr_err_if_set(priv->base); + } else { + dev_err(priv->dev, "timeout during data write\n"); + } + goto write_end; + } + + /* 47.3.1.4 + * Write Postamble: Due to internal electrical characteristics of the + * OTP during writes, all OTP operations following a write must be + * separated by 2 us after the clearing of HW_OCOTP_CTRL_BUSY following + * the write. + */ + udelay(2); + + /* reload all shadow registers */ + writel(IMX_OCOTP_BM_CTRL_REL_SHADOWS, + priv->base + IMX_OCOTP_ADDR_CTRL_SET); + ret = imx_ocotp_wait_for_busy(priv->base, + IMX_OCOTP_BM_CTRL_REL_SHADOWS); + if (ret < 0) { + dev_err(priv->dev, "timeout during shadow register reload\n"); + goto write_end; + } + +write_end: + clk_disable_unprepare(priv->clk); + mutex_unlock(&ocotp_mutex); + if (ret < 0) + return ret; + return bytes; } static struct nvmem_config imx_ocotp_nvmem_config = { .name = "imx-ocotp", - .read_only = true, + .read_only = false, .word_size = 4, .stride = 4, .owner = THIS_MODULE, .reg_read = imx_ocotp_read, + .reg_write = imx_ocotp_write, }; static const struct of_device_id imx_ocotp_dt_ids[] = { @@ -74,6 +313,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = { { .compatible = "fsl,imx6sl-ocotp", (void *)64 }, { .compatible = "fsl,imx6sx-ocotp", (void *)128 }, { .compatible = "fsl,imx6ul-ocotp", (void *)128 }, + { .compatible = "fsl,imx7d-ocotp", (void *)64 }, { }, }; MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids); @@ -90,12 +330,14 @@ static int imx_ocotp_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + priv->dev = dev; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->base = devm_ioremap_resource(dev, res); if (IS_ERR(priv->base)) return PTR_ERR(priv->base); - priv->clk = devm_clk_get(&pdev->dev, NULL); + priv->clk = devm_clk_get(dev, NULL); if (IS_ERR(priv->clk)) return PTR_ERR(priv->clk); @@ -104,7 +346,9 @@ static int imx_ocotp_probe(struct platform_device *pdev) imx_ocotp_nvmem_config.size = 4 * priv->nregs; imx_ocotp_nvmem_config.dev = dev; imx_ocotp_nvmem_config.priv = priv; + priv->config = &imx_ocotp_nvmem_config; nvmem = nvmem_register(&imx_ocotp_nvmem_config); + if (IS_ERR(nvmem)) return PTR_ERR(nvmem); diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c index 1567ccca8de3..0d6648be93b8 100644 --- a/drivers/nvmem/sunxi_sid.c +++ b/drivers/nvmem/sunxi_sid.c @@ -17,13 +17,24 @@ #include <linux/device.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/nvmem-provider.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/random.h> +/* Registers and special values for doing register-based SID readout on H3 */ +#define SUN8I_SID_PRCTL 0x40 +#define SUN8I_SID_RDKEY 0x60 + +#define SUN8I_SID_OFFSET_MASK 0x1FF +#define SUN8I_SID_OFFSET_SHIFT 16 +#define SUN8I_SID_OP_LOCK (0xAC << 8) +#define SUN8I_SID_READ BIT(1) + static struct nvmem_config econfig = { .name = "sunxi-sid", .read_only = true, @@ -32,8 +43,15 @@ static struct nvmem_config econfig = { .owner = THIS_MODULE, }; +struct sunxi_sid_cfg { + u32 value_offset; + u32 size; + bool need_register_readout; +}; + struct sunxi_sid { void __iomem *base; + u32 value_offset; }; /* We read the entire key, due to a 32 bit read alignment requirement. Since we @@ -58,12 +76,36 @@ static int sunxi_sid_read(void *context, unsigned int offset, struct sunxi_sid *sid = context; u8 *buf = val; + /* Offset the read operation to the real position of SID */ + offset += sid->value_offset; + while (bytes--) *buf++ = sunxi_sid_read_byte(sid, offset++); return 0; } +static int sun8i_sid_register_readout(const struct sunxi_sid *sid, + const unsigned int word) +{ + u32 reg_val; + int ret; + + /* Set word, lock access, and set read command */ + reg_val = (word & SUN8I_SID_OFFSET_MASK) + << SUN8I_SID_OFFSET_SHIFT; + reg_val |= SUN8I_SID_OP_LOCK | SUN8I_SID_READ; + writel(reg_val, sid->base + SUN8I_SID_PRCTL); + + ret = readl_poll_timeout(sid->base + SUN8I_SID_PRCTL, reg_val, + !(reg_val & SUN8I_SID_READ), 100, 250000); + if (ret) + return ret; + + writel(0, sid->base + SUN8I_SID_PRCTL); + return 0; +} + static int sunxi_sid_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -72,18 +114,42 @@ static int sunxi_sid_probe(struct platform_device *pdev) struct sunxi_sid *sid; int ret, i, size; char *randomness; + const struct sunxi_sid_cfg *cfg; sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); if (!sid) return -ENOMEM; + cfg = of_device_get_match_data(dev); + if (!cfg) + return -EINVAL; + sid->value_offset = cfg->value_offset; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sid->base = devm_ioremap_resource(dev, res); if (IS_ERR(sid->base)) return PTR_ERR(sid->base); - size = resource_size(res) - 1; - econfig.size = resource_size(res); + size = cfg->size; + + if (cfg->need_register_readout) { + /* + * H3's SID controller have a bug that the value at 0x200 + * offset is not the correct value when the hardware is reseted. + * However, after doing a register-based read operation, the + * value become right. + * Do a full read operation here, but ignore its value + * (as it's more fast to read by direct MMIO value than + * with registers) + */ + for (i = 0; i < (size >> 2); i++) { + ret = sun8i_sid_register_readout(sid, i); + if (ret) + return ret; + } + } + + econfig.size = size; econfig.dev = dev; econfig.reg_read = sunxi_sid_read; econfig.priv = sid; @@ -119,9 +185,24 @@ static int sunxi_sid_remove(struct platform_device *pdev) return nvmem_unregister(nvmem); } +static const struct sunxi_sid_cfg sun4i_a10_cfg = { + .size = 0x10, +}; + +static const struct sunxi_sid_cfg sun7i_a20_cfg = { + .size = 0x200, +}; + +static const struct sunxi_sid_cfg sun8i_h3_cfg = { + .value_offset = 0x200, + .size = 0x100, + .need_register_readout = true, +}; + static const struct of_device_id sunxi_sid_of_match[] = { - { .compatible = "allwinner,sun4i-a10-sid" }, - { .compatible = "allwinner,sun7i-a20-sid" }, + { .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg }, + { .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg }, + { .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg }, {/* sentinel */}, }; MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); diff --git a/drivers/platform/chrome/cros_ec_dev.c b/drivers/platform/chrome/cros_ec_dev.c index 6f09da4dadb8..6aa120cd0574 100644 --- a/drivers/platform/chrome/cros_ec_dev.c +++ b/drivers/platform/chrome/cros_ec_dev.c @@ -391,7 +391,6 @@ static int ec_device_probe(struct platform_device *pdev) int retval = -ENOMEM; struct device *dev = &pdev->dev; struct cros_ec_platform *ec_platform = dev_get_platdata(dev); - dev_t devno = MKDEV(ec_major, pdev->id); struct cros_ec_dev *ec = kzalloc(sizeof(*ec), GFP_KERNEL); if (!ec) @@ -407,23 +406,11 @@ static int ec_device_probe(struct platform_device *pdev) cdev_init(&ec->cdev, &fops); /* - * Add the character device - * Link cdev to the class device to be sure device is not used - * before unbinding it. - */ - ec->cdev.kobj.parent = &ec->class_dev.kobj; - retval = cdev_add(&ec->cdev, devno, 1); - if (retval) { - dev_err(dev, ": failed to add character device\n"); - goto cdev_add_failed; - } - - /* * Add the class device * Link to the character device for creating the /dev entry * in devtmpfs. */ - ec->class_dev.devt = ec->cdev.dev; + ec->class_dev.devt = MKDEV(ec_major, pdev->id); ec->class_dev.class = &cros_class; ec->class_dev.parent = dev; ec->class_dev.release = __remove; @@ -431,13 +418,13 @@ static int ec_device_probe(struct platform_device *pdev) retval = dev_set_name(&ec->class_dev, "%s", ec_platform->ec_name); if (retval) { dev_err(dev, "dev_set_name failed => %d\n", retval); - goto set_named_failed; + goto failed; } - retval = device_add(&ec->class_dev); + retval = cdev_device_add(&ec->cdev, &ec->class_dev); if (retval) { - dev_err(dev, "device_register failed => %d\n", retval); - goto dev_reg_failed; + dev_err(dev, "cdev_device_add failed => %d\n", retval); + goto failed; } /* check whether this EC is a sensor hub. */ @@ -446,12 +433,8 @@ static int ec_device_probe(struct platform_device *pdev) return 0; -dev_reg_failed: -set_named_failed: - dev_set_drvdata(dev, NULL); - cdev_del(&ec->cdev); -cdev_add_failed: - kfree(ec); +failed: + put_device(&ec->class_dev); return retval; } diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c index 2b21033f11f0..2de1e603bd2b 100644 --- a/drivers/platform/goldfish/goldfish_pipe.c +++ b/drivers/platform/goldfish/goldfish_pipe.c @@ -1,8 +1,8 @@ /* - * Copyright (C) 2011 Google, Inc. * Copyright (C) 2012 Intel, Inc. * Copyright (C) 2013 Intel, Inc. * Copyright (C) 2014 Linaro Limited + * Copyright (C) 2011-2016 Google, Inc. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -46,6 +46,7 @@ * exchange is properly mapped during a transfer. */ + #include <linux/module.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -63,122 +64,232 @@ #include <linux/acpi.h> /* + * Update this when something changes in the driver's behavior so the host + * can benefit from knowing it + */ +enum { + PIPE_DRIVER_VERSION = 2, + PIPE_CURRENT_DEVICE_VERSION = 2 +}; + +/* * IMPORTANT: The following constants must match the ones used and defined * in external/qemu/hw/goldfish_pipe.c in the Android source tree. */ -/* pipe device registers */ -#define PIPE_REG_COMMAND 0x00 /* write: value = command */ -#define PIPE_REG_STATUS 0x04 /* read */ -#define PIPE_REG_CHANNEL 0x08 /* read/write: channel id */ -#define PIPE_REG_CHANNEL_HIGH 0x30 /* read/write: channel id */ -#define PIPE_REG_SIZE 0x0c /* read/write: buffer size */ -#define PIPE_REG_ADDRESS 0x10 /* write: physical address */ -#define PIPE_REG_ADDRESS_HIGH 0x34 /* write: physical address */ -#define PIPE_REG_WAKES 0x14 /* read: wake flags */ -#define PIPE_REG_PARAMS_ADDR_LOW 0x18 /* read/write: batch data address */ -#define PIPE_REG_PARAMS_ADDR_HIGH 0x1c /* read/write: batch data address */ -#define PIPE_REG_ACCESS_PARAMS 0x20 /* write: batch access */ -#define PIPE_REG_VERSION 0x24 /* read: device version */ - -/* list of commands for PIPE_REG_COMMAND */ -#define CMD_OPEN 1 /* open new channel */ -#define CMD_CLOSE 2 /* close channel (from guest) */ -#define CMD_POLL 3 /* poll read/write status */ - /* List of bitflags returned in status of CMD_POLL command */ -#define PIPE_POLL_IN (1 << 0) -#define PIPE_POLL_OUT (1 << 1) -#define PIPE_POLL_HUP (1 << 2) - -/* The following commands are related to write operations */ -#define CMD_WRITE_BUFFER 4 /* send a user buffer to the emulator */ -#define CMD_WAKE_ON_WRITE 5 /* tell the emulator to wake us when writing - is possible */ -#define CMD_READ_BUFFER 6 /* receive a user buffer from the emulator */ -#define CMD_WAKE_ON_READ 7 /* tell the emulator to wake us when reading - * is possible */ +enum PipePollFlags { + PIPE_POLL_IN = 1 << 0, + PIPE_POLL_OUT = 1 << 1, + PIPE_POLL_HUP = 1 << 2 +}; /* Possible status values used to signal errors - see goldfish_pipe_error_convert */ -#define PIPE_ERROR_INVAL -1 -#define PIPE_ERROR_AGAIN -2 -#define PIPE_ERROR_NOMEM -3 -#define PIPE_ERROR_IO -4 +enum PipeErrors { + PIPE_ERROR_INVAL = -1, + PIPE_ERROR_AGAIN = -2, + PIPE_ERROR_NOMEM = -3, + PIPE_ERROR_IO = -4 +}; /* Bit-flags used to signal events from the emulator */ -#define PIPE_WAKE_CLOSED (1 << 0) /* emulator closed pipe */ -#define PIPE_WAKE_READ (1 << 1) /* pipe can now be read from */ -#define PIPE_WAKE_WRITE (1 << 2) /* pipe can now be written to */ - -struct access_params { - unsigned long channel; - u32 size; - unsigned long address; - u32 cmd; - u32 result; - /* reserved for future extension */ +enum PipeWakeFlags { + PIPE_WAKE_CLOSED = 1 << 0, /* emulator closed pipe */ + PIPE_WAKE_READ = 1 << 1, /* pipe can now be read from */ + PIPE_WAKE_WRITE = 1 << 2 /* pipe can now be written to */ +}; + +/* Bit flags for the 'flags' field */ +enum PipeFlagsBits { + BIT_CLOSED_ON_HOST = 0, /* pipe closed by host */ + BIT_WAKE_ON_WRITE = 1, /* want to be woken on writes */ + BIT_WAKE_ON_READ = 2, /* want to be woken on reads */ +}; + +enum PipeRegs { + PIPE_REG_CMD = 0, + + PIPE_REG_SIGNAL_BUFFER_HIGH = 4, + PIPE_REG_SIGNAL_BUFFER = 8, + PIPE_REG_SIGNAL_BUFFER_COUNT = 12, + + PIPE_REG_OPEN_BUFFER_HIGH = 20, + PIPE_REG_OPEN_BUFFER = 24, + + PIPE_REG_VERSION = 36, + + PIPE_REG_GET_SIGNALLED = 48, +}; + +enum PipeCmdCode { + PIPE_CMD_OPEN = 1, /* to be used by the pipe device itself */ + PIPE_CMD_CLOSE, + PIPE_CMD_POLL, + PIPE_CMD_WRITE, + PIPE_CMD_WAKE_ON_WRITE, + PIPE_CMD_READ, + PIPE_CMD_WAKE_ON_READ, + + /* + * TODO(zyy): implement a deferred read/write execution to allow + * parallel processing of pipe operations on the host. + */ + PIPE_CMD_WAKE_ON_DONE_IO, +}; + +enum { + MAX_BUFFERS_PER_COMMAND = 336, + MAX_SIGNALLED_PIPES = 64, + INITIAL_PIPES_CAPACITY = 64 +}; + +struct goldfish_pipe_dev; +struct goldfish_pipe; +struct goldfish_pipe_command; + +/* A per-pipe command structure, shared with the host */ +struct goldfish_pipe_command { + s32 cmd; /* PipeCmdCode, guest -> host */ + s32 id; /* pipe id, guest -> host */ + s32 status; /* command execution status, host -> guest */ + s32 reserved; /* to pad to 64-bit boundary */ + union { + /* Parameters for PIPE_CMD_{READ,WRITE} */ + struct { + /* number of buffers, guest -> host */ + u32 buffers_count; + /* number of consumed bytes, host -> guest */ + s32 consumed_size; + /* buffer pointers, guest -> host */ + u64 ptrs[MAX_BUFFERS_PER_COMMAND]; + /* buffer sizes, guest -> host */ + u32 sizes[MAX_BUFFERS_PER_COMMAND]; + } rw_params; + }; +}; + +/* A single signalled pipe information */ +struct signalled_pipe_buffer { + u32 id; u32 flags; }; -/* The global driver data. Holds a reference to the i/o page used to - * communicate with the emulator, and a wake queue for blocked tasks - * waiting to be awoken. - */ -struct goldfish_pipe_dev { - spinlock_t lock; - unsigned char __iomem *base; - struct access_params *aps; - int irq; - u32 version; +/* Parameters for the PIPE_CMD_OPEN command */ +struct open_command_param { + u64 command_buffer_ptr; + u32 rw_params_max_count; }; -static struct goldfish_pipe_dev pipe_dev[1]; +/* Device-level set of buffers shared with the host */ +struct goldfish_pipe_dev_buffers { + struct open_command_param open_command_params; + struct signalled_pipe_buffer signalled_pipe_buffers[ + MAX_SIGNALLED_PIPES]; +}; /* This data type models a given pipe instance */ struct goldfish_pipe { - struct goldfish_pipe_dev *dev; - struct mutex lock; + /* pipe ID - index into goldfish_pipe_dev::pipes array */ + u32 id; + /* The wake flags pipe is waiting for + * Note: not protected with any lock, uses atomic operations + * and barriers to make it thread-safe. + */ unsigned long flags; + /* wake flags host have signalled, + * - protected by goldfish_pipe_dev::lock + */ + unsigned long signalled_flags; + + /* A pointer to command buffer */ + struct goldfish_pipe_command *command_buffer; + + /* doubly linked list of signalled pipes, protected by + * goldfish_pipe_dev::lock + */ + struct goldfish_pipe *prev_signalled; + struct goldfish_pipe *next_signalled; + + /* + * A pipe's own lock. Protects the following: + * - *command_buffer - makes sure a command can safely write its + * parameters to the host and read the results back. + */ + struct mutex lock; + + /* A wake queue for sleeping until host signals an event */ wait_queue_head_t wake_queue; + /* Pointer to the parent goldfish_pipe_dev instance */ + struct goldfish_pipe_dev *dev; }; +/* The global driver data. Holds a reference to the i/o page used to + * communicate with the emulator, and a wake queue for blocked tasks + * waiting to be awoken. + */ +struct goldfish_pipe_dev { + /* + * Global device spinlock. Protects the following members: + * - pipes, pipes_capacity + * - [*pipes, *pipes + pipes_capacity) - array data + * - first_signalled_pipe, + * goldfish_pipe::prev_signalled, + * goldfish_pipe::next_signalled, + * goldfish_pipe::signalled_flags - all singnalled-related fields, + * in all allocated pipes + * - open_command_params - PIPE_CMD_OPEN-related buffers + * + * It looks like a lot of different fields, but the trick is that + * the only operation that happens often is the signalled pipes array + * manipulation. That's why it's OK for now to keep the rest of the + * fields under the same lock. If we notice too much contention because + * of PIPE_CMD_OPEN, then we should add a separate lock there. + */ + spinlock_t lock; -/* Bit flags for the 'flags' field */ -enum { - BIT_CLOSED_ON_HOST = 0, /* pipe closed by host */ - BIT_WAKE_ON_WRITE = 1, /* want to be woken on writes */ - BIT_WAKE_ON_READ = 2, /* want to be woken on reads */ + /* + * Array of the pipes of |pipes_capacity| elements, + * indexed by goldfish_pipe::id + */ + struct goldfish_pipe **pipes; + u32 pipes_capacity; + + /* Pointers to the buffers host uses for interaction with this driver */ + struct goldfish_pipe_dev_buffers *buffers; + + /* Head of a doubly linked list of signalled pipes */ + struct goldfish_pipe *first_signalled_pipe; + + /* Some device-specific data */ + int irq; + int version; + unsigned char __iomem *base; }; +struct goldfish_pipe_dev pipe_dev[1] = {}; -static u32 goldfish_cmd_status(struct goldfish_pipe *pipe, u32 cmd) +static int goldfish_cmd_locked(struct goldfish_pipe *pipe, enum PipeCmdCode cmd) { - unsigned long flags; - u32 status; - struct goldfish_pipe_dev *dev = pipe->dev; - - spin_lock_irqsave(&dev->lock, flags); - gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, - dev->base + PIPE_REG_CHANNEL_HIGH); - writel(cmd, dev->base + PIPE_REG_COMMAND); - status = readl(dev->base + PIPE_REG_STATUS); - spin_unlock_irqrestore(&dev->lock, flags); - return status; + pipe->command_buffer->cmd = cmd; + /* failure by default */ + pipe->command_buffer->status = PIPE_ERROR_INVAL; + writel(pipe->id, pipe->dev->base + PIPE_REG_CMD); + return pipe->command_buffer->status; } -static void goldfish_cmd(struct goldfish_pipe *pipe, u32 cmd) +static int goldfish_cmd(struct goldfish_pipe *pipe, enum PipeCmdCode cmd) { - unsigned long flags; - struct goldfish_pipe_dev *dev = pipe->dev; + int status; - spin_lock_irqsave(&dev->lock, flags); - gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, - dev->base + PIPE_REG_CHANNEL_HIGH); - writel(cmd, dev->base + PIPE_REG_COMMAND); - spin_unlock_irqrestore(&dev->lock, flags); + if (mutex_lock_interruptible(&pipe->lock)) + return PIPE_ERROR_IO; + status = goldfish_cmd_locked(pipe, cmd); + mutex_unlock(&pipe->lock); + return status; } -/* This function converts an error code returned by the emulator through +/* + * This function converts an error code returned by the emulator through * the PIPE_REG_STATUS i/o register into a valid negative errno value. */ static int goldfish_pipe_error_convert(int status) @@ -195,184 +306,202 @@ static int goldfish_pipe_error_convert(int status) } } -/* - * Notice: QEMU will return 0 for un-known register access, indicating - * param_acess is supported or not - */ -static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev, - struct access_params *aps) +static int pin_user_pages(unsigned long first_page, unsigned long last_page, + unsigned int last_page_size, int is_write, + struct page *pages[MAX_BUFFERS_PER_COMMAND], + unsigned int *iter_last_page_size) { - u32 aph, apl; - u64 paddr; - aph = readl(dev->base + PIPE_REG_PARAMS_ADDR_HIGH); - apl = readl(dev->base + PIPE_REG_PARAMS_ADDR_LOW); + int ret; + int requested_pages = ((last_page - first_page) >> PAGE_SHIFT) + 1; + + if (requested_pages > MAX_BUFFERS_PER_COMMAND) { + requested_pages = MAX_BUFFERS_PER_COMMAND; + *iter_last_page_size = PAGE_SIZE; + } else { + *iter_last_page_size = last_page_size; + } + + ret = get_user_pages_fast( + first_page, requested_pages, !is_write, pages); + if (ret <= 0) + return -EFAULT; + if (ret < requested_pages) + *iter_last_page_size = PAGE_SIZE; + return ret; - paddr = ((u64)aph << 32) | apl; - if (paddr != (__pa(aps))) - return 0; - return 1; } -/* 0 on success */ -static int setup_access_params_addr(struct platform_device *pdev, - struct goldfish_pipe_dev *dev) +static void release_user_pages(struct page **pages, int pages_count, + int is_write, s32 consumed_size) { - dma_addr_t dma_handle; - struct access_params *aps; + int i; - aps = dmam_alloc_coherent(&pdev->dev, sizeof(struct access_params), - &dma_handle, GFP_KERNEL); - if (!aps) - return -ENOMEM; + for (i = 0; i < pages_count; i++) { + if (!is_write && consumed_size > 0) + set_page_dirty(pages[i]); + put_page(pages[i]); + } +} + +/* Populate the call parameters, merging adjacent pages together */ +static void populate_rw_params( + struct page **pages, int pages_count, + unsigned long address, unsigned long address_end, + unsigned long first_page, unsigned long last_page, + unsigned int iter_last_page_size, int is_write, + struct goldfish_pipe_command *command) +{ + /* + * Process the first page separately - it's the only page that + * needs special handling for its start address. + */ + unsigned long xaddr = page_to_phys(pages[0]); + unsigned long xaddr_prev = xaddr; + int buffer_idx = 0; + int i = 1; + int size_on_page = first_page == last_page + ? (int)(address_end - address) + : (PAGE_SIZE - (address & ~PAGE_MASK)); + command->rw_params.ptrs[0] = (u64)(xaddr | (address & ~PAGE_MASK)); + command->rw_params.sizes[0] = size_on_page; + for (; i < pages_count; ++i) { + xaddr = page_to_phys(pages[i]); + size_on_page = (i == pages_count - 1) ? + iter_last_page_size : PAGE_SIZE; + if (xaddr == xaddr_prev + PAGE_SIZE) { + command->rw_params.sizes[buffer_idx] += size_on_page; + } else { + ++buffer_idx; + command->rw_params.ptrs[buffer_idx] = (u64)xaddr; + command->rw_params.sizes[buffer_idx] = size_on_page; + } + xaddr_prev = xaddr; + } + command->rw_params.buffers_count = buffer_idx + 1; +} - writel(upper_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_HIGH); - writel(lower_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_LOW); +static int transfer_max_buffers(struct goldfish_pipe *pipe, + unsigned long address, unsigned long address_end, int is_write, + unsigned long last_page, unsigned int last_page_size, + s32 *consumed_size, int *status) +{ + static struct page *pages[MAX_BUFFERS_PER_COMMAND]; + unsigned long first_page = address & PAGE_MASK; + unsigned int iter_last_page_size; + int pages_count = pin_user_pages(first_page, last_page, + last_page_size, is_write, + pages, &iter_last_page_size); - if (valid_batchbuffer_addr(dev, aps)) { - dev->aps = aps; - return 0; - } else - return -1; + if (pages_count < 0) + return pages_count; + + /* Serialize access to the pipe command buffers */ + if (mutex_lock_interruptible(&pipe->lock)) + return -ERESTARTSYS; + + populate_rw_params(pages, pages_count, address, address_end, + first_page, last_page, iter_last_page_size, is_write, + pipe->command_buffer); + + /* Transfer the data */ + *status = goldfish_cmd_locked(pipe, + is_write ? PIPE_CMD_WRITE : PIPE_CMD_READ); + + *consumed_size = pipe->command_buffer->rw_params.consumed_size; + + release_user_pages(pages, pages_count, is_write, *consumed_size); + + mutex_unlock(&pipe->lock); + + return 0; } -/* A value that will not be set by qemu emulator */ -#define INITIAL_BATCH_RESULT (0xdeadbeaf) -static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd, - unsigned long address, unsigned long avail, - struct goldfish_pipe *pipe, int *status) +static int wait_for_host_signal(struct goldfish_pipe *pipe, int is_write) { - struct access_params *aps = dev->aps; + u32 wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ; - if (aps == NULL) - return -1; + set_bit(wakeBit, &pipe->flags); + + /* Tell the emulator we're going to wait for a wake event */ + (void)goldfish_cmd(pipe, + is_write ? PIPE_CMD_WAKE_ON_WRITE : PIPE_CMD_WAKE_ON_READ); + + while (test_bit(wakeBit, &pipe->flags)) { + if (wait_event_interruptible( + pipe->wake_queue, + !test_bit(wakeBit, &pipe->flags))) + return -ERESTARTSYS; + + if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) + return -EIO; + } - aps->result = INITIAL_BATCH_RESULT; - aps->channel = (unsigned long)pipe; - aps->size = avail; - aps->address = address; - aps->cmd = cmd; - writel(cmd, dev->base + PIPE_REG_ACCESS_PARAMS); - /* - * If the aps->result has not changed, that means - * that the batch command failed - */ - if (aps->result == INITIAL_BATCH_RESULT) - return -1; - *status = aps->result; return 0; } -static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, - size_t bufflen, int is_write) +static ssize_t goldfish_pipe_read_write(struct file *filp, + char __user *buffer, size_t bufflen, int is_write) { - unsigned long irq_flags; struct goldfish_pipe *pipe = filp->private_data; - struct goldfish_pipe_dev *dev = pipe->dev; - unsigned long address, address_end; int count = 0, ret = -EINVAL; + unsigned long address, address_end, last_page; + unsigned int last_page_size; /* If the emulator already closed the pipe, no need to go further */ - if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) + if (unlikely(test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))) return -EIO; - /* Null reads or writes succeeds */ if (unlikely(bufflen == 0)) return 0; - /* Check the buffer range for access */ - if (!access_ok(is_write ? VERIFY_WRITE : VERIFY_READ, - buffer, bufflen)) + if (unlikely(!access_ok(is_write ? VERIFY_WRITE : VERIFY_READ, + buffer, bufflen))) return -EFAULT; - /* Serialize access to the pipe */ - if (mutex_lock_interruptible(&pipe->lock)) - return -ERESTARTSYS; - - address = (unsigned long)(void *)buffer; + address = (unsigned long)buffer; address_end = address + bufflen; + last_page = (address_end - 1) & PAGE_MASK; + last_page_size = ((address_end - 1) & ~PAGE_MASK) + 1; while (address < address_end) { - unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE; - unsigned long next = page_end < address_end ? page_end - : address_end; - unsigned long avail = next - address; - int status, wakeBit; - struct page *page; - - /* Either vaddr or paddr depending on the device version */ - unsigned long xaddr; + s32 consumed_size; + int status; - /* - * We grab the pages on a page-by-page basis in case user - * space gives us a potentially huge buffer but the read only - * returns a small amount, then there's no need to pin that - * much memory to the process. - */ - ret = get_user_pages_unlocked(address, 1, &page, - is_write ? 0 : FOLL_WRITE); + ret = transfer_max_buffers(pipe, address, address_end, is_write, + last_page, last_page_size, &consumed_size, + &status); if (ret < 0) break; - if (dev->version) { - /* Device version 1 or newer (qemu-android) expects the - * physical address. + if (consumed_size > 0) { + /* No matter what's the status, we've transferred + * something. */ - xaddr = page_to_phys(page) | (address & ~PAGE_MASK); - } else { - /* Device version 0 (classic emulator) expects the - * virtual address. - */ - xaddr = address; + count += consumed_size; + address += consumed_size; } - - /* Now, try to transfer the bytes in the current page */ - spin_lock_irqsave(&dev->lock, irq_flags); - if (access_with_param(dev, - is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER, - xaddr, avail, pipe, &status)) { - gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, - dev->base + PIPE_REG_CHANNEL_HIGH); - writel(avail, dev->base + PIPE_REG_SIZE); - gf_write_ptr((void *)xaddr, - dev->base + PIPE_REG_ADDRESS, - dev->base + PIPE_REG_ADDRESS_HIGH); - writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER, - dev->base + PIPE_REG_COMMAND); - status = readl(dev->base + PIPE_REG_STATUS); - } - spin_unlock_irqrestore(&dev->lock, irq_flags); - - if (status > 0 && !is_write) - set_page_dirty(page); - put_page(page); - - if (status > 0) { /* Correct transfer */ - count += status; - address += status; + if (status > 0) continue; - } else if (status == 0) { /* EOF */ + if (status == 0) { + /* EOF */ ret = 0; break; - } else if (status < 0 && count > 0) { + } + if (count > 0) { /* - * An error occurred and we already transferred - * something on one of the previous pages. + * An error occurred, but we already transferred + * something on one of the previous iterations. * Just return what we already copied and log this * err. - * - * Note: This seems like an incorrect approach but - * cannot change it until we check if any user space - * ABI relies on this behavior. */ if (status != PIPE_ERROR_AGAIN) - pr_info_ratelimited("goldfish_pipe: backend returned error %d on %s\n", + pr_info_ratelimited("goldfish_pipe: backend error %d on %s\n", status, is_write ? "write" : "read"); - ret = 0; break; } /* - * If the error is not PIPE_ERROR_AGAIN, or if we are not in + * If the error is not PIPE_ERROR_AGAIN, or if we are in * non-blocking mode, just return the error code. */ if (status != PIPE_ERROR_AGAIN || @@ -381,139 +510,214 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, break; } - /* - * The backend blocked the read/write, wait until the backend - * tells us it's ready to process more data. - */ - wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ; - set_bit(wakeBit, &pipe->flags); - - /* Tell the emulator we're going to wait for a wake event */ - goldfish_cmd(pipe, - is_write ? CMD_WAKE_ON_WRITE : CMD_WAKE_ON_READ); - - /* Unlock the pipe, then wait for the wake signal */ - mutex_unlock(&pipe->lock); - - while (test_bit(wakeBit, &pipe->flags)) { - if (wait_event_interruptible( - pipe->wake_queue, - !test_bit(wakeBit, &pipe->flags))) - return -ERESTARTSYS; - - if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) - return -EIO; - } - - /* Try to re-acquire the lock */ - if (mutex_lock_interruptible(&pipe->lock)) - return -ERESTARTSYS; + status = wait_for_host_signal(pipe, is_write); + if (status < 0) + return status; } - mutex_unlock(&pipe->lock); - if (ret < 0) - return ret; - else + if (count > 0) return count; + return ret; } static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer, - size_t bufflen, loff_t *ppos) + size_t bufflen, loff_t *ppos) { - return goldfish_pipe_read_write(filp, buffer, bufflen, 0); + return goldfish_pipe_read_write(filp, buffer, bufflen, + /* is_write */ 0); } static ssize_t goldfish_pipe_write(struct file *filp, const char __user *buffer, size_t bufflen, loff_t *ppos) { - return goldfish_pipe_read_write(filp, (char __user *)buffer, - bufflen, 1); + return goldfish_pipe_read_write(filp, + /* cast away the const */(char __user *)buffer, bufflen, + /* is_write */ 1); } - static unsigned int goldfish_pipe_poll(struct file *filp, poll_table *wait) { struct goldfish_pipe *pipe = filp->private_data; unsigned int mask = 0; int status; - mutex_lock(&pipe->lock); - poll_wait(filp, &pipe->wake_queue, wait); - status = goldfish_cmd_status(pipe, CMD_POLL); - - mutex_unlock(&pipe->lock); + status = goldfish_cmd(pipe, PIPE_CMD_POLL); + if (status < 0) + return -ERESTARTSYS; if (status & PIPE_POLL_IN) mask |= POLLIN | POLLRDNORM; - if (status & PIPE_POLL_OUT) mask |= POLLOUT | POLLWRNORM; - if (status & PIPE_POLL_HUP) mask |= POLLHUP; - if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) mask |= POLLERR; return mask; } -static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id) +static void signalled_pipes_add_locked(struct goldfish_pipe_dev *dev, + u32 id, u32 flags) { - struct goldfish_pipe_dev *dev = dev_id; - unsigned long irq_flags; - int count = 0; + struct goldfish_pipe *pipe; - /* - * We're going to read from the emulator a list of (channel,flags) - * pairs corresponding to the wake events that occurred on each - * blocked pipe (i.e. channel). - */ - spin_lock_irqsave(&dev->lock, irq_flags); - for (;;) { - /* First read the channel, 0 means the end of the list */ - struct goldfish_pipe *pipe; - unsigned long wakes; - unsigned long channel = 0; + if (WARN_ON(id >= dev->pipes_capacity)) + return; + + pipe = dev->pipes[id]; + if (!pipe) + return; + pipe->signalled_flags |= flags; + + if (pipe->prev_signalled || pipe->next_signalled + || dev->first_signalled_pipe == pipe) + return; /* already in the list */ + pipe->next_signalled = dev->first_signalled_pipe; + if (dev->first_signalled_pipe) + dev->first_signalled_pipe->prev_signalled = pipe; + dev->first_signalled_pipe = pipe; +} -#ifdef CONFIG_64BIT - channel = (u64)readl(dev->base + PIPE_REG_CHANNEL_HIGH) << 32; +static void signalled_pipes_remove_locked(struct goldfish_pipe_dev *dev, + struct goldfish_pipe *pipe) { + if (pipe->prev_signalled) + pipe->prev_signalled->next_signalled = pipe->next_signalled; + if (pipe->next_signalled) + pipe->next_signalled->prev_signalled = pipe->prev_signalled; + if (pipe == dev->first_signalled_pipe) + dev->first_signalled_pipe = pipe->next_signalled; + pipe->prev_signalled = NULL; + pipe->next_signalled = NULL; +} - if (channel == 0) - break; -#endif - channel |= readl(dev->base + PIPE_REG_CHANNEL); +static struct goldfish_pipe *signalled_pipes_pop_front( + struct goldfish_pipe_dev *dev, int *wakes) +{ + struct goldfish_pipe *pipe; + unsigned long flags; - if (channel == 0) - break; + spin_lock_irqsave(&dev->lock, flags); - /* Convert channel to struct pipe pointer + read wake flags */ - wakes = readl(dev->base + PIPE_REG_WAKES); - pipe = (struct goldfish_pipe *)(ptrdiff_t)channel; + pipe = dev->first_signalled_pipe; + if (pipe) { + *wakes = pipe->signalled_flags; + pipe->signalled_flags = 0; + /* + * This is an optimized version of + * signalled_pipes_remove_locked() + * - We want to make it as fast as possible to + * wake the sleeping pipe operations faster. + */ + dev->first_signalled_pipe = pipe->next_signalled; + if (dev->first_signalled_pipe) + dev->first_signalled_pipe->prev_signalled = NULL; + pipe->next_signalled = NULL; + } - /* Did the emulator just closed a pipe? */ + spin_unlock_irqrestore(&dev->lock, flags); + return pipe; +} + +static void goldfish_interrupt_task(unsigned long unused) +{ + struct goldfish_pipe_dev *dev = pipe_dev; + /* Iterate over the signalled pipes and wake them one by one */ + struct goldfish_pipe *pipe; + int wakes; + + while ((pipe = signalled_pipes_pop_front(dev, &wakes)) != NULL) { if (wakes & PIPE_WAKE_CLOSED) { - set_bit(BIT_CLOSED_ON_HOST, &pipe->flags); - wakes |= PIPE_WAKE_READ | PIPE_WAKE_WRITE; + pipe->flags = 1 << BIT_CLOSED_ON_HOST; + } else { + if (wakes & PIPE_WAKE_READ) + clear_bit(BIT_WAKE_ON_READ, &pipe->flags); + if (wakes & PIPE_WAKE_WRITE) + clear_bit(BIT_WAKE_ON_WRITE, &pipe->flags); } - if (wakes & PIPE_WAKE_READ) - clear_bit(BIT_WAKE_ON_READ, &pipe->flags); - if (wakes & PIPE_WAKE_WRITE) - clear_bit(BIT_WAKE_ON_WRITE, &pipe->flags); - + /* + * wake_up_interruptible() implies a write barrier, so don't + * explicitly add another one here. + */ wake_up_interruptible(&pipe->wake_queue); - count++; } - spin_unlock_irqrestore(&dev->lock, irq_flags); +} +DECLARE_TASKLET(goldfish_interrupt_tasklet, goldfish_interrupt_task, 0); - return (count == 0) ? IRQ_NONE : IRQ_HANDLED; +/* + * The general idea of the interrupt handling: + * + * 1. device raises an interrupt if there's at least one signalled pipe + * 2. IRQ handler reads the signalled pipes and their count from the device + * 3. device writes them into a shared buffer and returns the count + * it only resets the IRQ if it has returned all signalled pipes, + * otherwise it leaves it raised, so IRQ handler will be called + * again for the next chunk + * 4. IRQ handler adds all returned pipes to the device's signalled pipes list + * 5. IRQ handler launches a tasklet to process the signalled pipes from the + * list in a separate context + */ +static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id) +{ + u32 count; + u32 i; + unsigned long flags; + struct goldfish_pipe_dev *dev = dev_id; + + if (dev != pipe_dev) + return IRQ_NONE; + + /* Request the signalled pipes from the device */ + spin_lock_irqsave(&dev->lock, flags); + + count = readl(dev->base + PIPE_REG_GET_SIGNALLED); + if (count == 0) { + spin_unlock_irqrestore(&dev->lock, flags); + return IRQ_NONE; + } + if (count > MAX_SIGNALLED_PIPES) + count = MAX_SIGNALLED_PIPES; + + for (i = 0; i < count; ++i) + signalled_pipes_add_locked(dev, + dev->buffers->signalled_pipe_buffers[i].id, + dev->buffers->signalled_pipe_buffers[i].flags); + + spin_unlock_irqrestore(&dev->lock, flags); + + tasklet_schedule(&goldfish_interrupt_tasklet); + return IRQ_HANDLED; +} + +static int get_free_pipe_id_locked(struct goldfish_pipe_dev *dev) +{ + int id; + + for (id = 0; id < dev->pipes_capacity; ++id) + if (!dev->pipes[id]) + return id; + + { + /* Reallocate the array */ + u32 new_capacity = 2 * dev->pipes_capacity; + struct goldfish_pipe **pipes = + kcalloc(new_capacity, sizeof(*pipes), GFP_KERNEL); + if (!pipes) + return -ENOMEM; + memcpy(pipes, dev->pipes, sizeof(*pipes) * dev->pipes_capacity); + kfree(dev->pipes); + dev->pipes = pipes; + id = dev->pipes_capacity; + dev->pipes_capacity = new_capacity; + } + return id; } /** - * goldfish_pipe_open - open a channel to the AVD + * goldfish_pipe_open - open a channel to the AVD * @inode: inode of device * @file: file struct of opener * @@ -525,12 +729,13 @@ static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id) */ static int goldfish_pipe_open(struct inode *inode, struct file *file) { - struct goldfish_pipe *pipe; struct goldfish_pipe_dev *dev = pipe_dev; - int32_t status; + unsigned long flags; + int id; + int status; /* Allocate new pipe kernel object */ - pipe = kzalloc(sizeof(*pipe), GFP_KERNEL); + struct goldfish_pipe *pipe = kzalloc(sizeof(*pipe), GFP_KERNEL); if (pipe == NULL) return -ENOMEM; @@ -539,29 +744,69 @@ static int goldfish_pipe_open(struct inode *inode, struct file *file) init_waitqueue_head(&pipe->wake_queue); /* - * Now, tell the emulator we're opening a new pipe. We use the - * pipe object's address as the channel identifier for simplicity. + * Command buffer needs to be allocated on its own page to make sure + * it is physically contiguous in host's address space. */ + pipe->command_buffer = + (struct goldfish_pipe_command *)__get_free_page(GFP_KERNEL); + if (!pipe->command_buffer) { + status = -ENOMEM; + goto err_pipe; + } - status = goldfish_cmd_status(pipe, CMD_OPEN); - if (status < 0) { - kfree(pipe); - return status; + spin_lock_irqsave(&dev->lock, flags); + + id = get_free_pipe_id_locked(dev); + if (id < 0) { + status = id; + goto err_id_locked; } + dev->pipes[id] = pipe; + pipe->id = id; + pipe->command_buffer->id = id; + + /* Now tell the emulator we're opening a new pipe. */ + dev->buffers->open_command_params.rw_params_max_count = + MAX_BUFFERS_PER_COMMAND; + dev->buffers->open_command_params.command_buffer_ptr = + (u64)(unsigned long)__pa(pipe->command_buffer); + status = goldfish_cmd_locked(pipe, PIPE_CMD_OPEN); + spin_unlock_irqrestore(&dev->lock, flags); + if (status < 0) + goto err_cmd; /* All is done, save the pipe into the file's private data field */ file->private_data = pipe; return 0; + +err_cmd: + spin_lock_irqsave(&dev->lock, flags); + dev->pipes[id] = NULL; +err_id_locked: + spin_unlock_irqrestore(&dev->lock, flags); + free_page((unsigned long)pipe->command_buffer); +err_pipe: + kfree(pipe); + return status; } static int goldfish_pipe_release(struct inode *inode, struct file *filp) { + unsigned long flags; struct goldfish_pipe *pipe = filp->private_data; + struct goldfish_pipe_dev *dev = pipe->dev; /* The guest is closing the channel, so tell the emulator right now */ - goldfish_cmd(pipe, CMD_CLOSE); - kfree(pipe); + (void)goldfish_cmd(pipe, PIPE_CMD_CLOSE); + + spin_lock_irqsave(&dev->lock, flags); + dev->pipes[pipe->id] = NULL; + signalled_pipes_remove_locked(dev, pipe); + spin_unlock_irqrestore(&dev->lock, flags); + filp->private_data = NULL; + free_page((unsigned long)pipe->command_buffer); + kfree(pipe); return 0; } @@ -574,18 +819,91 @@ static const struct file_operations goldfish_pipe_fops = { .release = goldfish_pipe_release, }; -static struct miscdevice goldfish_pipe_device = { +static struct miscdevice goldfish_pipe_dev = { .minor = MISC_DYNAMIC_MINOR, .name = "goldfish_pipe", .fops = &goldfish_pipe_fops, }; +static int goldfish_pipe_device_init(struct platform_device *pdev) +{ + char *page; + struct goldfish_pipe_dev *dev = pipe_dev; + int err = devm_request_irq(&pdev->dev, dev->irq, + goldfish_pipe_interrupt, + IRQF_SHARED, "goldfish_pipe", dev); + if (err) { + dev_err(&pdev->dev, "unable to allocate IRQ for v2\n"); + return err; + } + + err = misc_register(&goldfish_pipe_dev); + if (err) { + dev_err(&pdev->dev, "unable to register v2 device\n"); + return err; + } + + dev->first_signalled_pipe = NULL; + dev->pipes_capacity = INITIAL_PIPES_CAPACITY; + dev->pipes = kcalloc(dev->pipes_capacity, sizeof(*dev->pipes), + GFP_KERNEL); + if (!dev->pipes) + return -ENOMEM; + + /* + * We're going to pass two buffers, open_command_params and + * signalled_pipe_buffers, to the host. This means each of those buffers + * needs to be contained in a single physical page. The easiest choice + * is to just allocate a page and place the buffers in it. + */ + if (WARN_ON(sizeof(*dev->buffers) > PAGE_SIZE)) + return -ENOMEM; + + page = (char *)__get_free_page(GFP_KERNEL); + if (!page) { + kfree(dev->pipes); + return -ENOMEM; + } + dev->buffers = (struct goldfish_pipe_dev_buffers *)page; + + /* Send the buffer addresses to the host */ + { + u64 paddr = __pa(&dev->buffers->signalled_pipe_buffers); + + writel((u32)(unsigned long)(paddr >> 32), + dev->base + PIPE_REG_SIGNAL_BUFFER_HIGH); + writel((u32)(unsigned long)paddr, + dev->base + PIPE_REG_SIGNAL_BUFFER); + writel((u32)MAX_SIGNALLED_PIPES, + dev->base + PIPE_REG_SIGNAL_BUFFER_COUNT); + + paddr = __pa(&dev->buffers->open_command_params); + writel((u32)(unsigned long)(paddr >> 32), + dev->base + PIPE_REG_OPEN_BUFFER_HIGH); + writel((u32)(unsigned long)paddr, + dev->base + PIPE_REG_OPEN_BUFFER); + } + return 0; +} + +static void goldfish_pipe_device_deinit(struct platform_device *pdev) +{ + struct goldfish_pipe_dev *dev = pipe_dev; + + misc_deregister(&goldfish_pipe_dev); + kfree(dev->pipes); + free_page((unsigned long)dev->buffers); +} + static int goldfish_pipe_probe(struct platform_device *pdev) { int err; struct resource *r; struct goldfish_pipe_dev *dev = pipe_dev; + if (WARN_ON(sizeof(struct goldfish_pipe_command) > PAGE_SIZE)) + return -ENOMEM; + /* not thread safe, but this should not happen */ WARN_ON(dev->base != NULL); @@ -609,26 +927,21 @@ static int goldfish_pipe_probe(struct platform_device *pdev) } dev->irq = r->start; - err = devm_request_irq(&pdev->dev, dev->irq, goldfish_pipe_interrupt, - IRQF_SHARED, "goldfish_pipe", dev); - if (err) { - dev_err(&pdev->dev, "unable to allocate IRQ\n"); - goto error; - } - - err = misc_register(&goldfish_pipe_device); - if (err) { - dev_err(&pdev->dev, "unable to register device\n"); - goto error; - } - setup_access_params_addr(pdev, dev); - - /* Although the pipe device in the classic Android emulator does not - * recognize the 'version' register, it won't treat this as an error - * either and will simply return 0, which is fine. + /* + * Exchange the versions with the host device + * + * Note: v1 driver used to not report its version, so we write it before + * reading device version back: this allows the host implementation to + * detect the old driver (if there was no version write before read). */ + writel((u32)PIPE_DRIVER_VERSION, dev->base + PIPE_REG_VERSION); dev->version = readl(dev->base + PIPE_REG_VERSION); - return 0; + if (WARN_ON(dev->version < PIPE_CURRENT_DEVICE_VERSION)) + return -EINVAL; + + err = goldfish_pipe_device_init(pdev); + if (!err) + return 0; error: dev->base = NULL; @@ -638,7 +951,7 @@ error: static int goldfish_pipe_remove(struct platform_device *pdev) { struct goldfish_pipe_dev *dev = pipe_dev; - misc_deregister(&goldfish_pipe_device); + goldfish_pipe_device_deinit(pdev); dev->base = NULL; return 0; } @@ -655,17 +968,16 @@ static const struct of_device_id goldfish_pipe_of_match[] = { }; MODULE_DEVICE_TABLE(of, goldfish_pipe_of_match); -static struct platform_driver goldfish_pipe = { +static struct platform_driver goldfish_pipe_driver = { .probe = goldfish_pipe_probe, .remove = goldfish_pipe_remove, .driver = { .name = "goldfish_pipe", - .owner = THIS_MODULE, .of_match_table = goldfish_pipe_of_match, .acpi_match_table = ACPI_PTR(goldfish_pipe_acpi_match), } }; -module_platform_driver(goldfish_pipe); +module_platform_driver(goldfish_pipe_driver); MODULE_AUTHOR("David Turner <digit@google.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index 2f07cd615665..6eb0db37dd88 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -64,6 +64,43 @@ static int pps_cdev_fasync(int fd, struct file *file, int on) return fasync_helper(fd, file, on, &pps->async_queue); } +static int pps_cdev_pps_fetch(struct pps_device *pps, struct pps_fdata *fdata) +{ + unsigned int ev = pps->last_ev; + int err = 0; + + /* Manage the timeout */ + if (fdata->timeout.flags & PPS_TIME_INVALID) + err = wait_event_interruptible(pps->queue, + ev != pps->last_ev); + else { + unsigned long ticks; + + dev_dbg(pps->dev, "timeout %lld.%09d\n", + (long long) fdata->timeout.sec, + fdata->timeout.nsec); + ticks = fdata->timeout.sec * HZ; + ticks += fdata->timeout.nsec / (NSEC_PER_SEC / HZ); + + if (ticks != 0) { + err = wait_event_interruptible_timeout( + pps->queue, + ev != pps->last_ev, + ticks); + if (err == 0) + return -ETIMEDOUT; + } + } + + /* Check for pending signals */ + if (err == -ERESTARTSYS) { + dev_dbg(pps->dev, "pending signal caught\n"); + return -EINTR; + } + + return 0; +} + static long pps_cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -144,7 +181,6 @@ static long pps_cdev_ioctl(struct file *file, case PPS_FETCH: { struct pps_fdata fdata; - unsigned int ev; dev_dbg(pps->dev, "PPS_FETCH\n"); @@ -152,36 +188,9 @@ static long pps_cdev_ioctl(struct file *file, if (err) return -EFAULT; - ev = pps->last_ev; - - /* Manage the timeout */ - if (fdata.timeout.flags & PPS_TIME_INVALID) - err = wait_event_interruptible(pps->queue, - ev != pps->last_ev); - else { - unsigned long ticks; - - dev_dbg(pps->dev, "timeout %lld.%09d\n", - (long long) fdata.timeout.sec, - fdata.timeout.nsec); - ticks = fdata.timeout.sec * HZ; - ticks += fdata.timeout.nsec / (NSEC_PER_SEC / HZ); - - if (ticks != 0) { - err = wait_event_interruptible_timeout( - pps->queue, - ev != pps->last_ev, - ticks); - if (err == 0) - return -ETIMEDOUT; - } - } - - /* Check for pending signals */ - if (err == -ERESTARTSYS) { - dev_dbg(pps->dev, "pending signal caught\n"); - return -EINTR; - } + err = pps_cdev_pps_fetch(pps, &fdata); + if (err) + return err; /* Return the fetched timestamp */ spin_lock_irq(&pps->lock); @@ -242,6 +251,57 @@ static long pps_cdev_ioctl(struct file *file, return 0; } +#ifdef CONFIG_COMPAT +static long pps_cdev_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct pps_device *pps = file->private_data; + void __user *uarg = (void __user *) arg; + + cmd = _IOC(_IOC_DIR(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd), sizeof(void *)); + + if (cmd == PPS_FETCH) { + struct pps_fdata_compat compat; + struct pps_fdata fdata; + int err; + + dev_dbg(pps->dev, "PPS_FETCH\n"); + + err = copy_from_user(&compat, uarg, sizeof(struct pps_fdata_compat)); + if (err) + return -EFAULT; + + memcpy(&fdata.timeout, &compat.timeout, + sizeof(struct pps_ktime_compat)); + + err = pps_cdev_pps_fetch(pps, &fdata); + if (err) + return err; + + /* Return the fetched timestamp */ + spin_lock_irq(&pps->lock); + + compat.info.assert_sequence = pps->assert_sequence; + compat.info.clear_sequence = pps->clear_sequence; + compat.info.current_mode = pps->current_mode; + + memcpy(&compat.info.assert_tu, &pps->assert_tu, + sizeof(struct pps_ktime_compat)); + memcpy(&compat.info.clear_tu, &pps->clear_tu, + sizeof(struct pps_ktime_compat)); + + spin_unlock_irq(&pps->lock); + + return copy_to_user(uarg, &compat, + sizeof(struct pps_fdata_compat)) ? -EFAULT : 0; + } + + return pps_cdev_ioctl(file, cmd, arg); +} +#else +#define pps_cdev_compat_ioctl NULL +#endif + static int pps_cdev_open(struct inode *inode, struct file *file) { struct pps_device *pps = container_of(inode->i_cdev, @@ -268,6 +328,7 @@ static const struct file_operations pps_cdev_fops = { .llseek = no_llseek, .poll = pps_cdev_poll, .fasync = pps_cdev_fasync, + .compat_ioctl = pps_cdev_compat_ioctl, .unlocked_ioctl = pps_cdev_ioctl, .open = pps_cdev_open, .release = pps_cdev_release, diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c index 50b617af81bd..5beb0c361076 100644 --- a/drivers/rapidio/devices/rio_mport_cdev.c +++ b/drivers/rapidio/devices/rio_mport_cdev.c @@ -2444,31 +2444,25 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport) mutex_init(&md->buf_mutex); mutex_init(&md->file_mutex); INIT_LIST_HEAD(&md->file_list); - cdev_init(&md->cdev, &mport_fops); - md->cdev.owner = THIS_MODULE; - ret = cdev_add(&md->cdev, MKDEV(MAJOR(dev_number), mport->id), 1); - if (ret < 0) { - kfree(md); - rmcd_error("Unable to register a device, err=%d", ret); - return NULL; - } - md->dev.devt = md->cdev.dev; + device_initialize(&md->dev); + md->dev.devt = MKDEV(MAJOR(dev_number), mport->id); md->dev.class = dev_class; md->dev.parent = &mport->dev; md->dev.release = mport_device_release; dev_set_name(&md->dev, DEV_NAME "%d", mport->id); atomic_set(&md->active, 1); - ret = device_register(&md->dev); + cdev_init(&md->cdev, &mport_fops); + md->cdev.owner = THIS_MODULE; + + ret = cdev_device_add(&md->cdev, &md->dev); if (ret) { rmcd_error("Failed to register mport %d (err=%d)", mport->id, ret); goto err_cdev; } - get_device(&md->dev); - INIT_LIST_HEAD(&md->doorbells); spin_lock_init(&md->db_lock); INIT_LIST_HEAD(&md->portwrites); @@ -2513,8 +2507,7 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport) return md; err_cdev: - cdev_del(&md->cdev); - kfree(md); + put_device(&md->dev); return NULL; } @@ -2578,7 +2571,7 @@ static void mport_cdev_remove(struct mport_dev *md) atomic_set(&md->active, 0); mport_cdev_terminate_dma(md); rio_del_mport_pw_handler(md->mport, md, rio_mport_pw_handler); - cdev_del(&(md->cdev)); + cdev_device_del(&md->cdev, &md->dev); mport_cdev_kill_fasync(md); flush_workqueue(dma_wq); @@ -2603,7 +2596,6 @@ static void mport_cdev_remove(struct mport_dev *md) rio_release_inb_dbell(md->mport, 0, 0x0fff); - device_unregister(&md->dev); put_device(&md->dev); } diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index eda41563d06d..73e4b407f162 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -108,15 +108,11 @@ static struct attribute *rio_dev_attrs[] = { &dev_attr_lprev.attr, &dev_attr_destid.attr, &dev_attr_modalias.attr, - NULL, -}; -static const struct attribute_group rio_dev_group = { - .attrs = rio_dev_attrs, -}; - -const struct attribute_group *rio_dev_groups[] = { - &rio_dev_group, + /* Switch-only attributes */ + &dev_attr_routes.attr, + &dev_attr_lnext.attr, + &dev_attr_hopcount.attr, NULL, }; @@ -259,46 +255,40 @@ static struct bin_attribute rio_config_attr = { .write = rio_write_config, }; -/** - * rio_create_sysfs_dev_files - create RIO specific sysfs files - * @rdev: device whose entries should be created - * - * Create files when @rdev is added to sysfs. - */ -int rio_create_sysfs_dev_files(struct rio_dev *rdev) -{ - int err = 0; - - err = device_create_bin_file(&rdev->dev, &rio_config_attr); +static struct bin_attribute *rio_dev_bin_attrs[] = { + &rio_config_attr, + NULL, +}; - if (!err && (rdev->pef & RIO_PEF_SWITCH)) { - err |= device_create_file(&rdev->dev, &dev_attr_routes); - err |= device_create_file(&rdev->dev, &dev_attr_lnext); - err |= device_create_file(&rdev->dev, &dev_attr_hopcount); +static umode_t rio_dev_is_attr_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct rio_dev *rdev = to_rio_dev(kobj_to_dev(kobj)); + umode_t mode = attr->mode; + + if (!(rdev->pef & RIO_PEF_SWITCH) && + (attr == &dev_attr_routes.attr || + attr == &dev_attr_lnext.attr || + attr == &dev_attr_hopcount.attr)) { + /* + * Hide switch-specific attributes for a non-switch device. + */ + mode = 0; } - if (err) - pr_warning("RIO: Failed to create attribute file(s) for %s\n", - rio_name(rdev)); - - return err; + return mode; } -/** - * rio_remove_sysfs_dev_files - cleanup RIO specific sysfs files - * @rdev: device whose entries we should free - * - * Cleanup when @rdev is removed from sysfs. - */ -void rio_remove_sysfs_dev_files(struct rio_dev *rdev) -{ - device_remove_bin_file(&rdev->dev, &rio_config_attr); - if (rdev->pef & RIO_PEF_SWITCH) { - device_remove_file(&rdev->dev, &dev_attr_routes); - device_remove_file(&rdev->dev, &dev_attr_lnext); - device_remove_file(&rdev->dev, &dev_attr_hopcount); - } -} +static const struct attribute_group rio_dev_group = { + .attrs = rio_dev_attrs, + .is_visible = rio_dev_is_attr_visible, + .bin_attrs = rio_dev_bin_attrs, +}; + +const struct attribute_group *rio_dev_groups[] = { + &rio_dev_group, + NULL, +}; static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, size_t count) diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 37042858c2db..38d949405618 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -192,8 +192,6 @@ int rio_add_device(struct rio_dev *rdev) } spin_unlock(&rio_global_list_lock); - rio_create_sysfs_dev_files(rdev); - return 0; } EXPORT_SYMBOL_GPL(rio_add_device); @@ -220,7 +218,6 @@ void rio_del_device(struct rio_dev *rdev, enum rio_device_state state) } } spin_unlock(&rio_global_list_lock); - rio_remove_sysfs_dev_files(rdev); device_unregister(&rdev->dev); } EXPORT_SYMBOL_GPL(rio_del_device); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 9796b3fee70d..b2abf8576397 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -27,8 +27,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, u8 hopcount, u32 from); extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); -extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern void rio_remove_sysfs_dev_files(struct rio_dev *rdev); extern int rio_lock_device(struct rio_mport *port, u16 destid, u8 hopcount, int wait_ms); extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount); diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 74fd9746aeca..5fb439897fe1 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -195,6 +195,8 @@ struct rtc_device *rtc_device_register(const char *name, struct device *dev, goto exit_ida; } + device_initialize(&rtc->dev); + rtc->id = id; rtc->ops = ops; rtc->owner = owner; @@ -233,14 +235,19 @@ struct rtc_device *rtc_device_register(const char *name, struct device *dev, rtc_dev_prepare(rtc); - err = device_register(&rtc->dev); + err = cdev_device_add(&rtc->char_dev, &rtc->dev); if (err) { + dev_warn(&rtc->dev, "%s: failed to add char device %d:%d\n", + rtc->name, MAJOR(rtc->dev.devt), rtc->id); + /* This will free both memory and the ID */ put_device(&rtc->dev); goto exit; + } else { + dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", rtc->name, + MAJOR(rtc->dev.devt), rtc->id); } - rtc_dev_add_device(rtc); rtc_proc_add_device(rtc); dev_info(dev, "rtc core: registered %s as %s\n", @@ -271,9 +278,8 @@ void rtc_device_unregister(struct rtc_device *rtc) * Remove innards of this RTC, then disable it, before * letting any rtc_class_open() users access it again */ - rtc_dev_del_device(rtc); rtc_proc_del_device(rtc); - device_del(&rtc->dev); + cdev_device_del(&rtc->char_dev, &rtc->dev); rtc->ops = NULL; mutex_unlock(&rtc->ops_lock); put_device(&rtc->dev); diff --git a/drivers/rtc/rtc-core.h b/drivers/rtc/rtc-core.h index a098aea197fc..7a4ed2f7c7d7 100644 --- a/drivers/rtc/rtc-core.h +++ b/drivers/rtc/rtc-core.h @@ -3,8 +3,6 @@ extern void __init rtc_dev_init(void); extern void __exit rtc_dev_exit(void); extern void rtc_dev_prepare(struct rtc_device *rtc); -extern void rtc_dev_add_device(struct rtc_device *rtc); -extern void rtc_dev_del_device(struct rtc_device *rtc); #else @@ -20,14 +18,6 @@ static inline void rtc_dev_prepare(struct rtc_device *rtc) { } -static inline void rtc_dev_add_device(struct rtc_device *rtc) -{ -} - -static inline void rtc_dev_del_device(struct rtc_device *rtc) -{ -} - #endif #ifdef CONFIG_RTC_INTF_PROC diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 6dc8f29697ab..e81a8711fea7 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -477,23 +477,6 @@ void rtc_dev_prepare(struct rtc_device *rtc) cdev_init(&rtc->char_dev, &rtc_dev_fops); rtc->char_dev.owner = rtc->owner; - rtc->char_dev.kobj.parent = &rtc->dev.kobj; -} - -void rtc_dev_add_device(struct rtc_device *rtc) -{ - if (cdev_add(&rtc->char_dev, rtc->dev.devt, 1)) - dev_warn(&rtc->dev, "%s: failed to add char device %d:%d\n", - rtc->name, MAJOR(rtc_devt), rtc->id); - else - dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", rtc->name, - MAJOR(rtc_devt), rtc->id); -} - -void rtc_dev_del_device(struct rtc_device *rtc) -{ - if (rtc->dev.devt) - cdev_del(&rtc->char_dev); } void __init rtc_dev_init(void) diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index ed948025112c..0e56f1eb05dc 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -400,9 +400,6 @@ static void __remove(struct device *dev) kfree(oud->odi.osdname); - if (oud->cdev.owner) - cdev_del(&oud->cdev); - osd_dev_fini(&oud->od); scsi_device_put(scsi_device); @@ -411,7 +408,6 @@ static void __remove(struct device *dev) if (oud->disk) put_disk(oud->disk); - ida_remove(&osd_minor_ida, oud->minor); kfree(oud); } @@ -446,8 +442,21 @@ static int osd_probe(struct device *dev) if (NULL == oud) goto err_retract_minor; + /* class device member */ + device_initialize(&oud->class_dev); dev_set_drvdata(dev, oud); oud->minor = minor; + oud->class_dev.devt = MKDEV(SCSI_OSD_MAJOR, oud->minor); + oud->class_dev.class = &osd_uld_class; + oud->class_dev.parent = dev; + oud->class_dev.release = __remove; + + /* hold one more reference to the scsi_device that will get released + * in __release, in case a logout is happening while fs is mounted + */ + if (scsi_device_get(scsi_device)) + goto err_retract_minor; + osd_dev_init(&oud->od, scsi_device); /* allocate a disk and set it up */ /* FIXME: do we need this since sg has already done that */ @@ -461,61 +470,34 @@ static int osd_probe(struct device *dev) sprintf(disk->disk_name, "osd%d", oud->minor); oud->disk = disk; - /* hold one more reference to the scsi_device that will get released - * in __release, in case a logout is happening while fs is mounted - */ - if (scsi_device_get(scsi_device)) - goto err_put_disk; - osd_dev_init(&oud->od, scsi_device); - /* Detect the OSD Version */ error = __detect_osd(oud); if (error) { OSD_ERR("osd detection failed, non-compatible OSD device\n"); - goto err_put_sdev; + goto err_free_osd; } /* init the char-device for communication with user-mode */ cdev_init(&oud->cdev, &osd_fops); oud->cdev.owner = THIS_MODULE; - error = cdev_add(&oud->cdev, - MKDEV(SCSI_OSD_MAJOR, oud->minor), 1); - if (error) { - OSD_ERR("cdev_add failed\n"); - goto err_put_disk; - } - /* class device member */ - oud->class_dev.devt = oud->cdev.dev; - oud->class_dev.class = &osd_uld_class; - oud->class_dev.parent = dev; - oud->class_dev.release = __remove; error = dev_set_name(&oud->class_dev, "%s", disk->disk_name); if (error) { OSD_ERR("dev_set_name failed => %d\n", error); - goto err_put_cdev; + goto err_free_osd; } - error = device_register(&oud->class_dev); + error = cdev_device_add(&oud->cdev, &oud->class_dev); if (error) { OSD_ERR("device_register failed => %d\n", error); - goto err_put_cdev; + goto err_free_osd; } - get_device(&oud->class_dev); - OSD_INFO("osd_probe %s\n", disk->disk_name); return 0; -err_put_cdev: - cdev_del(&oud->cdev); -err_put_sdev: - scsi_device_put(scsi_device); -err_put_disk: - put_disk(disk); err_free_osd: - dev_set_drvdata(dev, NULL); - kfree(oud); + put_device(&oud->class_dev); err_retract_minor: ida_remove(&osd_minor_ida, minor); return error; @@ -531,9 +513,10 @@ static int osd_remove(struct device *dev) dev, oud->od.scsi_device, scsi_device); } - device_unregister(&oud->class_dev); - + cdev_device_del(&oud->cdev, &oud->class_dev); + ida_remove(&osd_minor_ida, oud->minor); put_device(&oud->class_dev); + return 0; } diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 60ce7fd54e89..1c196f87e9d9 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -66,7 +66,7 @@ static ssize_t map_size_show(struct uio_mem *mem, char *buf) static ssize_t map_offset_show(struct uio_mem *mem, char *buf) { - return sprintf(buf, "0x%llx\n", (unsigned long long)mem->addr & ~PAGE_MASK); + return sprintf(buf, "0x%llx\n", (unsigned long long)mem->offs); } struct map_sysfs_entry { diff --git a/drivers/uio/uio_mf624.c b/drivers/uio/uio_mf624.c index d1f95a1567bb..35187c052e8c 100644 --- a/drivers/uio/uio_mf624.c +++ b/drivers/uio/uio_mf624.c @@ -127,6 +127,24 @@ static int mf624_irqcontrol(struct uio_info *info, s32 irq_on) return 0; } +static int mf624_setup_mem(struct pci_dev *dev, int bar, struct uio_mem *mem, const char *name) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + + mem->name = name; + mem->addr = start & PAGE_MASK; + mem->offs = start & ~PAGE_MASK; + if (!mem->addr) + return -ENODEV; + mem->size = ((start & ~PAGE_MASK) + len + PAGE_SIZE - 1) & PAGE_MASK; + mem->memtype = UIO_MEM_PHYS; + mem->internal_addr = pci_ioremap_bar(dev, bar); + if (!mem->internal_addr) + return -ENODEV; + return 0; +} + static int mf624_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct uio_info *info; @@ -147,37 +165,15 @@ static int mf624_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Note: Datasheet says device uses BAR0, BAR1, BAR2 -- do not trust it */ /* BAR0 */ - info->mem[0].name = "PCI chipset, interrupts, status " - "bits, special functions"; - info->mem[0].addr = pci_resource_start(dev, 0); - if (!info->mem[0].addr) + if (mf624_setup_mem(dev, 0, &info->mem[0], "PCI chipset, interrupts, status " + "bits, special functions")) goto out_release; - info->mem[0].size = pci_resource_len(dev, 0); - info->mem[0].memtype = UIO_MEM_PHYS; - info->mem[0].internal_addr = pci_ioremap_bar(dev, 0); - if (!info->mem[0].internal_addr) - goto out_release; - /* BAR2 */ - info->mem[1].name = "ADC, DAC, DIO"; - info->mem[1].addr = pci_resource_start(dev, 2); - if (!info->mem[1].addr) - goto out_unmap0; - info->mem[1].size = pci_resource_len(dev, 2); - info->mem[1].memtype = UIO_MEM_PHYS; - info->mem[1].internal_addr = pci_ioremap_bar(dev, 2); - if (!info->mem[1].internal_addr) + if (mf624_setup_mem(dev, 2, &info->mem[1], "ADC, DAC, DIO")) goto out_unmap0; /* BAR4 */ - info->mem[2].name = "Counter/timer chip"; - info->mem[2].addr = pci_resource_start(dev, 4); - if (!info->mem[2].addr) - goto out_unmap1; - info->mem[2].size = pci_resource_len(dev, 4); - info->mem[2].memtype = UIO_MEM_PHYS; - info->mem[2].internal_addr = pci_ioremap_bar(dev, 4); - if (!info->mem[2].internal_addr) + if (mf624_setup_mem(dev, 4, &info->mem[2], "Counter/timer chip")) goto out_unmap1; info->irq = dev->irq; diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c index 0035cf79760a..6a3ead42aba8 100644 --- a/drivers/vme/vme.c +++ b/drivers/vme/vme.c @@ -76,9 +76,16 @@ static struct vme_bridge *find_bridge(struct vme_resource *resource) } } -/* +/** + * vme_free_consistent - Allocate contiguous memory. + * @resource: Pointer to VME resource. + * @size: Size of allocation required. + * @dma: Pointer to variable to store physical address of allocation. + * * Allocate a contiguous block of memory for use by the driver. This is used to * create the buffers for the slave windows. + * + * Return: Virtual address of allocation on success, NULL on failure. */ void *vme_alloc_consistent(struct vme_resource *resource, size_t size, dma_addr_t *dma) @@ -111,8 +118,14 @@ void *vme_alloc_consistent(struct vme_resource *resource, size_t size, } EXPORT_SYMBOL(vme_alloc_consistent); -/* - * Free previously allocated contiguous block of memory. +/** + * vme_free_consistent - Free previously allocated memory. + * @resource: Pointer to VME resource. + * @size: Size of allocation to free. + * @vaddr: Virtual address of allocation. + * @dma: Physical address of allocation. + * + * Free previously allocated block of contiguous memory. */ void vme_free_consistent(struct vme_resource *resource, size_t size, void *vaddr, dma_addr_t dma) @@ -145,6 +158,16 @@ void vme_free_consistent(struct vme_resource *resource, size_t size, } EXPORT_SYMBOL(vme_free_consistent); +/** + * vme_get_size - Helper function returning size of a VME window + * @resource: Pointer to VME slave or master resource. + * + * Determine the size of the VME window provided. This is a helper + * function, wrappering the call to vme_master_get or vme_slave_get + * depending on the type of window resource handed to it. + * + * Return: Size of the window on success, zero on failure. + */ size_t vme_get_size(struct vme_resource *resource) { int enabled, retval; @@ -259,9 +282,16 @@ static u32 vme_get_aspace(int am) return 0; } -/* - * Request a slave image with specific attributes, return some unique - * identifier. +/** + * vme_slave_request - Request a VME slave window resource. + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * @address: Required VME address space. + * @cycle: Required VME data transfer cycle type. + * + * Request use of a VME window resource capable of being set for the requested + * address space and data transfer cycle. + * + * Return: Pointer to VME resource on success, NULL on failure. */ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address, u32 cycle) @@ -327,6 +357,23 @@ err_bus: } EXPORT_SYMBOL(vme_slave_request); +/** + * vme_slave_set - Set VME slave window configuration. + * @resource: Pointer to VME slave resource. + * @enabled: State to which the window should be configured. + * @vme_base: Base address for the window. + * @size: Size of the VME window. + * @buf_base: Based address of buffer used to provide VME slave window storage. + * @aspace: VME address space for the VME window. + * @cycle: VME data transfer cycle type for the VME window. + * + * Set configuration for provided VME slave window. + * + * Return: Zero on success, -EINVAL if operation is not supported on this + * device, if an invalid resource has been provided or invalid + * attributes are provided. Hardware specific errors may also be + * returned. + */ int vme_slave_set(struct vme_resource *resource, int enabled, unsigned long long vme_base, unsigned long long size, dma_addr_t buf_base, u32 aspace, u32 cycle) @@ -362,6 +409,21 @@ int vme_slave_set(struct vme_resource *resource, int enabled, } EXPORT_SYMBOL(vme_slave_set); +/** + * vme_slave_get - Retrieve VME slave window configuration. + * @resource: Pointer to VME slave resource. + * @enabled: Pointer to variable for storing state. + * @vme_base: Pointer to variable for storing window base address. + * @size: Pointer to variable for storing window size. + * @buf_base: Pointer to variable for storing slave buffer base address. + * @aspace: Pointer to variable for storing VME address space. + * @cycle: Pointer to variable for storing VME data transfer cycle type. + * + * Return configuration for provided VME slave window. + * + * Return: Zero on success, -EINVAL if operation is not supported on this + * device or if an invalid resource has been provided. + */ int vme_slave_get(struct vme_resource *resource, int *enabled, unsigned long long *vme_base, unsigned long long *size, dma_addr_t *buf_base, u32 *aspace, u32 *cycle) @@ -386,6 +448,12 @@ int vme_slave_get(struct vme_resource *resource, int *enabled, } EXPORT_SYMBOL(vme_slave_get); +/** + * vme_slave_free - Free VME slave window + * @resource: Pointer to VME slave resource. + * + * Free the provided slave resource so that it may be reallocated. + */ void vme_slave_free(struct vme_resource *resource) { struct vme_slave_resource *slave_image; @@ -415,9 +483,17 @@ void vme_slave_free(struct vme_resource *resource) } EXPORT_SYMBOL(vme_slave_free); -/* - * Request a master image with specific attributes, return some unique - * identifier. +/** + * vme_master_request - Request a VME master window resource. + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * @address: Required VME address space. + * @cycle: Required VME data transfer cycle type. + * @dwidth: Required VME data transfer width. + * + * Request use of a VME window resource capable of being set for the requested + * address space, data transfer cycle and width. + * + * Return: Pointer to VME resource on success, NULL on failure. */ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address, u32 cycle, u32 dwidth) @@ -486,6 +562,23 @@ err_bus: } EXPORT_SYMBOL(vme_master_request); +/** + * vme_master_set - Set VME master window configuration. + * @resource: Pointer to VME master resource. + * @enabled: State to which the window should be configured. + * @vme_base: Base address for the window. + * @size: Size of the VME window. + * @aspace: VME address space for the VME window. + * @cycle: VME data transfer cycle type for the VME window. + * @dwidth: VME data transfer width for the VME window. + * + * Set configuration for provided VME master window. + * + * Return: Zero on success, -EINVAL if operation is not supported on this + * device, if an invalid resource has been provided or invalid + * attributes are provided. Hardware specific errors may also be + * returned. + */ int vme_master_set(struct vme_resource *resource, int enabled, unsigned long long vme_base, unsigned long long size, u32 aspace, u32 cycle, u32 dwidth) @@ -522,6 +615,21 @@ int vme_master_set(struct vme_resource *resource, int enabled, } EXPORT_SYMBOL(vme_master_set); +/** + * vme_master_get - Retrieve VME master window configuration. + * @resource: Pointer to VME master resource. + * @enabled: Pointer to variable for storing state. + * @vme_base: Pointer to variable for storing window base address. + * @size: Pointer to variable for storing window size. + * @aspace: Pointer to variable for storing VME address space. + * @cycle: Pointer to variable for storing VME data transfer cycle type. + * @dwidth: Pointer to variable for storing VME data transfer width. + * + * Return configuration for provided VME master window. + * + * Return: Zero on success, -EINVAL if operation is not supported on this + * device or if an invalid resource has been provided. + */ int vme_master_get(struct vme_resource *resource, int *enabled, unsigned long long *vme_base, unsigned long long *size, u32 *aspace, u32 *cycle, u32 *dwidth) @@ -546,8 +654,20 @@ int vme_master_get(struct vme_resource *resource, int *enabled, } EXPORT_SYMBOL(vme_master_get); -/* - * Read data out of VME space into a buffer. +/** + * vme_master_write - Read data from VME space into a buffer. + * @resource: Pointer to VME master resource. + * @buf: Pointer to buffer where data should be transferred. + * @count: Number of bytes to transfer. + * @offset: Offset into VME master window at which to start transfer. + * + * Perform read of count bytes of data from location on VME bus which maps into + * the VME master window at offset to buf. + * + * Return: Number of bytes read, -EINVAL if resource is not a VME master + * resource or read operation is not supported. -EFAULT returned if + * invalid offset is provided. Hardware specific errors may also be + * returned. */ ssize_t vme_master_read(struct vme_resource *resource, void *buf, size_t count, loff_t offset) @@ -583,8 +703,20 @@ ssize_t vme_master_read(struct vme_resource *resource, void *buf, size_t count, } EXPORT_SYMBOL(vme_master_read); -/* - * Write data out to VME space from a buffer. +/** + * vme_master_write - Write data out to VME space from a buffer. + * @resource: Pointer to VME master resource. + * @buf: Pointer to buffer holding data to transfer. + * @count: Number of bytes to transfer. + * @offset: Offset into VME master window at which to start transfer. + * + * Perform write of count bytes of data from buf to location on VME bus which + * maps into the VME master window at offset. + * + * Return: Number of bytes written, -EINVAL if resource is not a VME master + * resource or write operation is not supported. -EFAULT returned if + * invalid offset is provided. Hardware specific errors may also be + * returned. */ ssize_t vme_master_write(struct vme_resource *resource, void *buf, size_t count, loff_t offset) @@ -619,8 +751,24 @@ ssize_t vme_master_write(struct vme_resource *resource, void *buf, } EXPORT_SYMBOL(vme_master_write); -/* - * Perform RMW cycle to provided location. +/** + * vme_master_rmw - Perform read-modify-write cycle. + * @resource: Pointer to VME master resource. + * @mask: Bits to be compared and swapped in operation. + * @compare: Bits to be compared with data read from offset. + * @swap: Bits to be swapped in data read from offset. + * @offset: Offset into VME master window at which to perform operation. + * + * Perform read-modify-write cycle on provided location: + * - Location on VME bus is read. + * - Bits selected by mask are compared with compare. + * - Where a selected bit matches that in compare and are selected in swap, + * the bit is swapped. + * - Result written back to location on VME bus. + * + * Return: Bytes written on success, -EINVAL if resource is not a VME master + * resource or RMW operation is not supported. Hardware specific + * errors may also be returned. */ unsigned int vme_master_rmw(struct vme_resource *resource, unsigned int mask, unsigned int compare, unsigned int swap, loff_t offset) @@ -644,6 +792,17 @@ unsigned int vme_master_rmw(struct vme_resource *resource, unsigned int mask, } EXPORT_SYMBOL(vme_master_rmw); +/** + * vme_master_mmap - Mmap region of VME master window. + * @resource: Pointer to VME master resource. + * @vma: Pointer to definition of user mapping. + * + * Memory map a region of the VME master window into user space. + * + * Return: Zero on success, -EINVAL if resource is not a VME master + * resource or -EFAULT if map exceeds window size. Other generic mmap + * errors may also be returned. + */ int vme_master_mmap(struct vme_resource *resource, struct vm_area_struct *vma) { struct vme_master_resource *image; @@ -670,6 +829,12 @@ int vme_master_mmap(struct vme_resource *resource, struct vm_area_struct *vma) } EXPORT_SYMBOL(vme_master_mmap); +/** + * vme_master_free - Free VME master window + * @resource: Pointer to VME master resource. + * + * Free the provided master resource so that it may be reallocated. + */ void vme_master_free(struct vme_resource *resource) { struct vme_master_resource *master_image; @@ -699,9 +864,15 @@ void vme_master_free(struct vme_resource *resource) } EXPORT_SYMBOL(vme_master_free); -/* - * Request a DMA controller with specific attributes, return some unique - * identifier. +/** + * vme_dma_request - Request a DMA controller. + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * @route: Required src/destination combination. + * + * Request a VME DMA controller with capability to perform transfers bewteen + * requested source/destination combination. + * + * Return: Pointer to VME DMA resource on success, NULL on failure. */ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route) { @@ -768,8 +939,15 @@ err_bus: } EXPORT_SYMBOL(vme_dma_request); -/* - * Start new list +/** + * vme_new_dma_list - Create new VME DMA list. + * @resource: Pointer to VME DMA resource. + * + * Create a new VME DMA list. It is the responsibility of the user to free + * the list once it is no longer required with vme_dma_list_free(). + * + * Return: Pointer to new VME DMA list, NULL on allocation failure or invalid + * VME DMA resource. */ struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource) { @@ -796,8 +974,16 @@ struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource) } EXPORT_SYMBOL(vme_new_dma_list); -/* - * Create "Pattern" type attributes +/** + * vme_dma_pattern_attribute - Create "Pattern" type VME DMA list attribute. + * @pattern: Value to use used as pattern + * @type: Type of pattern to be written. + * + * Create VME DMA list attribute for pattern generation. It is the + * responsibility of the user to free used attributes using + * vme_dma_free_attribute(). + * + * Return: Pointer to VME DMA attribute, NULL on failure. */ struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type) { @@ -831,8 +1017,15 @@ err_attr: } EXPORT_SYMBOL(vme_dma_pattern_attribute); -/* - * Create "PCI" type attributes +/** + * vme_dma_pci_attribute - Create "PCI" type VME DMA list attribute. + * @address: PCI base address for DMA transfer. + * + * Create VME DMA list attribute pointing to a location on PCI for DMA + * transfers. It is the responsibility of the user to free used attributes + * using vme_dma_free_attribute(). + * + * Return: Pointer to VME DMA attribute, NULL on failure. */ struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address) { @@ -869,8 +1062,18 @@ err_attr: } EXPORT_SYMBOL(vme_dma_pci_attribute); -/* - * Create "VME" type attributes +/** + * vme_dma_vme_attribute - Create "VME" type VME DMA list attribute. + * @address: VME base address for DMA transfer. + * @aspace: VME address space to use for DMA transfer. + * @cycle: VME bus cycle to use for DMA transfer. + * @dwidth: VME data width to use for DMA transfer. + * + * Create VME DMA list attribute pointing to a location on the VME bus for DMA + * transfers. It is the responsibility of the user to free used attributes + * using vme_dma_free_attribute(). + * + * Return: Pointer to VME DMA attribute, NULL on failure. */ struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address, u32 aspace, u32 cycle, u32 dwidth) @@ -908,8 +1111,12 @@ err_attr: } EXPORT_SYMBOL(vme_dma_vme_attribute); -/* - * Free attribute +/** + * vme_dma_free_attribute - Free DMA list attribute. + * @attributes: Pointer to DMA list attribute. + * + * Free VME DMA list attribute. VME DMA list attributes can be safely freed + * once vme_dma_list_add() has returned. */ void vme_dma_free_attribute(struct vme_dma_attr *attributes) { @@ -918,6 +1125,23 @@ void vme_dma_free_attribute(struct vme_dma_attr *attributes) } EXPORT_SYMBOL(vme_dma_free_attribute); +/** + * vme_dma_list_add - Add enty to a VME DMA list. + * @list: Pointer to VME list. + * @src: Pointer to DMA list attribute to use as source. + * @dest: Pointer to DMA list attribute to use as destination. + * @count: Number of bytes to transfer. + * + * Add an entry to the provided VME DMA list. Entry requires pointers to source + * and destination DMA attributes and a count. + * + * Please note, the attributes supported as source and destinations for + * transfers are hardware dependent. + * + * Return: Zero on success, -EINVAL if operation is not supported on this + * device or if the link list has already been submitted for execution. + * Hardware specific errors also possible. + */ int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) { @@ -942,6 +1166,16 @@ int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src, } EXPORT_SYMBOL(vme_dma_list_add); +/** + * vme_dma_list_exec - Queue a VME DMA list for execution. + * @list: Pointer to VME list. + * + * Queue the provided VME DMA list for execution. The call will return once the + * list has been executed. + * + * Return: Zero on success, -EINVAL if operation is not supported on this + * device. Hardware specific errors also possible. + */ int vme_dma_list_exec(struct vme_dma_list *list) { struct vme_bridge *bridge = list->parent->parent; @@ -962,6 +1196,15 @@ int vme_dma_list_exec(struct vme_dma_list *list) } EXPORT_SYMBOL(vme_dma_list_exec); +/** + * vme_dma_list_free - Free a VME DMA list. + * @list: Pointer to VME list. + * + * Free the provided DMA list and all its entries. + * + * Return: Zero on success, -EINVAL on invalid VME resource, -EBUSY if resource + * is still in use. Hardware specific errors also possible. + */ int vme_dma_list_free(struct vme_dma_list *list) { struct vme_bridge *bridge = list->parent->parent; @@ -994,6 +1237,15 @@ int vme_dma_list_free(struct vme_dma_list *list) } EXPORT_SYMBOL(vme_dma_list_free); +/** + * vme_dma_free - Free a VME DMA resource. + * @resource: Pointer to VME DMA resource. + * + * Free the provided DMA resource so that it may be reallocated. + * + * Return: Zero on success, -EINVAL on invalid VME resource, -EBUSY if resource + * is still active. + */ int vme_dma_free(struct vme_resource *resource) { struct vme_dma_resource *ctrlr; @@ -1099,6 +1351,22 @@ void vme_irq_handler(struct vme_bridge *bridge, int level, int statid) } EXPORT_SYMBOL(vme_irq_handler); +/** + * vme_irq_request - Request a specific VME interrupt. + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * @level: Interrupt priority being requested. + * @statid: Interrupt vector being requested. + * @callback: Pointer to callback function called when VME interrupt/vector + * received. + * @priv_data: Generic pointer that will be passed to the callback function. + * + * Request callback to be attached as a handler for VME interrupts with provided + * level and statid. + * + * Return: Zero on success, -EINVAL on invalid vme device, level or if the + * function is not supported, -EBUSY if the level/statid combination is + * already in use. Hardware specific errors also possible. + */ int vme_irq_request(struct vme_dev *vdev, int level, int statid, void (*callback)(int, int, void *), void *priv_data) @@ -1142,6 +1410,14 @@ int vme_irq_request(struct vme_dev *vdev, int level, int statid, } EXPORT_SYMBOL(vme_irq_request); +/** + * vme_irq_free - Free a VME interrupt. + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * @level: Interrupt priority of interrupt being freed. + * @statid: Interrupt vector of interrupt being freed. + * + * Remove previously attached callback from VME interrupt priority/vector. + */ void vme_irq_free(struct vme_dev *vdev, int level, int statid) { struct vme_bridge *bridge; @@ -1177,6 +1453,18 @@ void vme_irq_free(struct vme_dev *vdev, int level, int statid) } EXPORT_SYMBOL(vme_irq_free); +/** + * vme_irq_generate - Generate VME interrupt. + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * @level: Interrupt priority at which to assert the interrupt. + * @statid: Interrupt vector to associate with the interrupt. + * + * Generate a VME interrupt of the provided level and with the provided + * statid. + * + * Return: Zero on success, -EINVAL on invalid vme device, level or if the + * function is not supported. Hardware specific errors also possible. + */ int vme_irq_generate(struct vme_dev *vdev, int level, int statid) { struct vme_bridge *bridge; @@ -1201,8 +1489,15 @@ int vme_irq_generate(struct vme_dev *vdev, int level, int statid) } EXPORT_SYMBOL(vme_irq_generate); -/* - * Request the location monitor, return resource or NULL +/** + * vme_lm_request - Request a VME location monitor + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * + * Allocate a location monitor resource to the driver. A location monitor + * allows the driver to monitor accesses to a contiguous number of + * addresses on the VME bus. + * + * Return: Pointer to a VME resource on success or NULL on failure. */ struct vme_resource *vme_lm_request(struct vme_dev *vdev) { @@ -1218,7 +1513,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev) goto err_bus; } - /* Loop through DMA resources */ + /* Loop through LM resources */ list_for_each(lm_pos, &bridge->lm_resources) { lm = list_entry(lm_pos, struct vme_lm_resource, list); @@ -1264,6 +1559,17 @@ err_bus: } EXPORT_SYMBOL(vme_lm_request); +/** + * vme_lm_count - Determine number of VME Addresses monitored + * @resource: Pointer to VME location monitor resource. + * + * The number of contiguous addresses monitored is hardware dependent. + * Return the number of contiguous addresses monitored by the + * location monitor. + * + * Return: Count of addresses monitored or -EINVAL when provided with an + * invalid location monitor resource. + */ int vme_lm_count(struct vme_resource *resource) { struct vme_lm_resource *lm; @@ -1279,6 +1585,20 @@ int vme_lm_count(struct vme_resource *resource) } EXPORT_SYMBOL(vme_lm_count); +/** + * vme_lm_set - Configure location monitor + * @resource: Pointer to VME location monitor resource. + * @lm_base: Base address to monitor. + * @aspace: VME address space to monitor. + * @cycle: VME bus cycle type to monitor. + * + * Set the base address, address space and cycle type of accesses to be + * monitored by the location monitor. + * + * Return: Zero on success, -EINVAL when provided with an invalid location + * monitor resource or function is not supported. Hardware specific + * errors may also be returned. + */ int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base, u32 aspace, u32 cycle) { @@ -1301,6 +1621,20 @@ int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base, } EXPORT_SYMBOL(vme_lm_set); +/** + * vme_lm_get - Retrieve location monitor settings + * @resource: Pointer to VME location monitor resource. + * @lm_base: Pointer used to output the base address monitored. + * @aspace: Pointer used to output the address space monitored. + * @cycle: Pointer used to output the VME bus cycle type monitored. + * + * Retrieve the base address, address space and cycle type of accesses to + * be monitored by the location monitor. + * + * Return: Zero on success, -EINVAL when provided with an invalid location + * monitor resource or function is not supported. Hardware specific + * errors may also be returned. + */ int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base, u32 *aspace, u32 *cycle) { @@ -1323,6 +1657,21 @@ int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base, } EXPORT_SYMBOL(vme_lm_get); +/** + * vme_lm_attach - Provide callback for location monitor address + * @resource: Pointer to VME location monitor resource. + * @monitor: Offset to which callback should be attached. + * @callback: Pointer to callback function called when triggered. + * @data: Generic pointer that will be passed to the callback function. + * + * Attach a callback to the specificed offset into the location monitors + * monitored addresses. A generic pointer is provided to allow data to be + * passed to the callback when called. + * + * Return: Zero on success, -EINVAL when provided with an invalid location + * monitor resource or function is not supported. Hardware specific + * errors may also be returned. + */ int vme_lm_attach(struct vme_resource *resource, int monitor, void (*callback)(void *), void *data) { @@ -1345,6 +1694,18 @@ int vme_lm_attach(struct vme_resource *resource, int monitor, } EXPORT_SYMBOL(vme_lm_attach); +/** + * vme_lm_detach - Remove callback for location monitor address + * @resource: Pointer to VME location monitor resource. + * @monitor: Offset to which callback should be removed. + * + * Remove the callback associated with the specificed offset into the + * location monitors monitored addresses. + * + * Return: Zero on success, -EINVAL when provided with an invalid location + * monitor resource or function is not supported. Hardware specific + * errors may also be returned. + */ int vme_lm_detach(struct vme_resource *resource, int monitor) { struct vme_bridge *bridge = find_bridge(resource); @@ -1366,6 +1727,18 @@ int vme_lm_detach(struct vme_resource *resource, int monitor) } EXPORT_SYMBOL(vme_lm_detach); +/** + * vme_lm_free - Free allocated VME location monitor + * @resource: Pointer to VME location monitor resource. + * + * Free allocation of a VME location monitor. + * + * WARNING: This function currently expects that any callbacks that have + * been attached to the location monitor have been removed. + * + * Return: Zero on success, -EINVAL when provided with an invalid location + * monitor resource. + */ void vme_lm_free(struct vme_resource *resource) { struct vme_lm_resource *lm; @@ -1392,6 +1765,16 @@ void vme_lm_free(struct vme_resource *resource) } EXPORT_SYMBOL(vme_lm_free); +/** + * vme_slot_num - Retrieve slot ID + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * + * Retrieve the slot ID associated with the provided VME device. + * + * Return: The slot ID on success, -EINVAL if VME bridge cannot be determined + * or the function is not supported. Hardware specific errors may also + * be returned. + */ int vme_slot_num(struct vme_dev *vdev) { struct vme_bridge *bridge; @@ -1411,6 +1794,15 @@ int vme_slot_num(struct vme_dev *vdev) } EXPORT_SYMBOL(vme_slot_num); +/** + * vme_bus_num - Retrieve bus number + * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. + * + * Retrieve the bus enumeration associated with the provided VME device. + * + * Return: The bus number on success, -EINVAL if VME bridge cannot be + * determined. + */ int vme_bus_num(struct vme_dev *vdev) { struct vme_bridge *bridge; @@ -1556,6 +1948,15 @@ static int __vme_register_driver(struct vme_driver *drv, unsigned int ndevs) return err; } +/** + * vme_register_driver - Register a VME driver + * @drv: Pointer to VME driver structure to register. + * @ndevs: Maximum number of devices to allow to be enumerated. + * + * Register a VME device driver with the VME subsystem. + * + * Return: Zero on success, error value on registration failure. + */ int vme_register_driver(struct vme_driver *drv, unsigned int ndevs) { int err; @@ -1576,6 +1977,12 @@ int vme_register_driver(struct vme_driver *drv, unsigned int ndevs) } EXPORT_SYMBOL(vme_register_driver); +/** + * vme_unregister_driver - Unregister a VME driver + * @drv: Pointer to VME driver structure to unregister. + * + * Unregister a VME device driver from the VME subsystem. + */ void vme_unregister_driver(struct vme_driver *drv) { struct vme_dev *dev, *dev_tmp; diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index 3749db8b4396..97a676bf5989 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -36,7 +36,6 @@ #include "../w1.h" #include "../w1_int.h" -#include "../w1_log.h" MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); @@ -157,9 +156,6 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent struct matrox_device *dev; int err; - assert(pdev != NULL); - assert(ent != NULL); - if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400) return -ENODEV; @@ -224,8 +220,6 @@ static void matrox_w1_remove(struct pci_dev *pdev) { struct matrox_device *dev = pci_get_drvdata(pdev); - assert(dev != NULL); - if (dev->found) { w1_remove_master_device(dev->bus_master); iounmap(dev->virt_addr); diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 0ef9f2663dbd..fb68465908f2 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -86,6 +86,12 @@ config W1_SLAVE_DS2433_CRC Each block has 30 bytes of data and a two byte CRC16. Full block writes are only allowed if the CRC is valid. +config W1_SLAVE_DS2438 + tristate "DS2438 Smart Battery Monitor 0x26 family support" + help + Say Y here if you want to use a 1-wire + DS2438 Smart Battery Monitor device support + config W1_SLAVE_DS2760 tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)" help diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index b4a358955ef9..54c63e420302 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_W1_SLAVE_DS2406) += w1_ds2406.o obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o +obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c new file mode 100644 index 000000000000..5ededb4965e1 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2438.c @@ -0,0 +1,390 @@ +/* + * 1-Wire implementation for the ds2438 chip + * + * Copyright (c) 2017 Mariusz Bialonczyk <manio@skyboo.net> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/types.h> +#include <linux/delay.h> + +#include "../w1.h" +#include "../w1_family.h" + +#define W1_DS2438_RETRIES 3 + +/* Memory commands */ +#define W1_DS2438_READ_SCRATCH 0xBE +#define W1_DS2438_WRITE_SCRATCH 0x4E +#define W1_DS2438_COPY_SCRATCH 0x48 +#define W1_DS2438_RECALL_MEMORY 0xB8 +/* Register commands */ +#define W1_DS2438_CONVERT_TEMP 0x44 +#define W1_DS2438_CONVERT_VOLTAGE 0xB4 + +#define DS2438_PAGE_SIZE 8 +#define DS2438_ADC_INPUT_VAD 0 +#define DS2438_ADC_INPUT_VDD 1 +#define DS2438_MAX_CONVERSION_TIME 10 /* ms */ + +/* Page #0 definitions */ +#define DS2438_STATUS_REG 0x00 /* Status/Configuration Register */ +#define DS2438_STATUS_IAD (1 << 0) /* Current A/D Control Bit */ +#define DS2438_STATUS_CA (1 << 1) /* Current Accumulator Configuration */ +#define DS2438_STATUS_EE (1 << 2) /* Current Accumulator Shadow Selector bit */ +#define DS2438_STATUS_AD (1 << 3) /* Voltage A/D Input Select Bit */ +#define DS2438_STATUS_TB (1 << 4) /* Temperature Busy Flag */ +#define DS2438_STATUS_NVB (1 << 5) /* Nonvolatile Memory Busy Flag */ +#define DS2438_STATUS_ADB (1 << 6) /* A/D Converter Busy Flag */ + +#define DS2438_TEMP_LSB 0x01 +#define DS2438_TEMP_MSB 0x02 +#define DS2438_VOLTAGE_LSB 0x03 +#define DS2438_VOLTAGE_MSB 0x04 +#define DS2438_CURRENT_LSB 0x05 +#define DS2438_CURRENT_MSB 0x06 +#define DS2438_THRESHOLD 0x07 + +int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[2]; + u8 crc; + size_t count; + + while (retries--) { + crc = 0; + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_RECALL_MEMORY; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_READ_SCRATCH; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1); + if (count == DS2438_PAGE_SIZE + 1) { + crc = w1_calc_crc8(buf, DS2438_PAGE_SIZE); + + /* check for correct CRC */ + if ((u8)buf[DS2438_PAGE_SIZE] == crc) + return 0; + } + } + return -1; +} + +int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; + unsigned int tm = DS2438_MAX_CONVERSION_TIME; + unsigned long sleep_rem; + int ret; + + mutex_lock(&sl->master->bus_mutex); + + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_write_8(sl->master, W1_DS2438_CONVERT_TEMP); + + mutex_unlock(&sl->master->bus_mutex); + sleep_rem = msleep_interruptible(tm); + if (sleep_rem != 0) { + ret = -1; + goto post_unlock; + } + + if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) { + ret = -1; + goto post_unlock; + } + + break; + } + + if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { + *temperature = (((int16_t) w1_buf[DS2438_TEMP_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_TEMP_LSB]); + ret = 0; + } else + ret = -1; + + mutex_unlock(&sl->master->bus_mutex); + +post_unlock: + return ret; +} + +int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[3]; + u8 status; + int perform_write = 0; + + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_RECALL_MEMORY; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_READ_SCRATCH; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + /* reading one byte of result */ + status = w1_read_8(sl->master); + + /* if bit0=1, set a value to a mask for easy compare */ + if (value) + value = mask; + + if ((status & mask) == value) + return 0; /* already set as requested */ + else { + /* changing bit */ + status ^= mask; + perform_write = 1; + } + break; + } + + if (perform_write) { + retries = W1_DS2438_RETRIES; + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_WRITE_SCRATCH; + w1_buf[1] = 0x00; + w1_buf[2] = status; + w1_write_block(sl->master, w1_buf, 3); + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_COPY_SCRATCH; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + return 0; + } + } + return -1; +} + +uint16_t w1_ds2438_get_voltage(struct w1_slave *sl, int adc_input, uint16_t *voltage) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; + unsigned int tm = DS2438_MAX_CONVERSION_TIME; + unsigned long sleep_rem; + int ret; + + mutex_lock(&sl->master->bus_mutex); + + if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_AD, adc_input)) { + ret = -1; + goto pre_unlock; + } + + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_write_8(sl->master, W1_DS2438_CONVERT_VOLTAGE); + + mutex_unlock(&sl->master->bus_mutex); + sleep_rem = msleep_interruptible(tm); + if (sleep_rem != 0) { + ret = -1; + goto post_unlock; + } + + if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) { + ret = -1; + goto post_unlock; + } + + break; + } + + if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { + *voltage = (((uint16_t) w1_buf[DS2438_VOLTAGE_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_VOLTAGE_LSB]); + ret = 0; + } else + ret = -1; + +pre_unlock: + mutex_unlock(&sl->master->bus_mutex); + +post_unlock: + return ret; +} + +static ssize_t iad_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + + if (count != 1 || off != 0) + return -EFAULT; + + mutex_lock(&sl->master->bus_mutex); + + if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_IAD, *buf & 0x01) == 0) + ret = 1; + else + ret = -EIO; + + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static ssize_t page0_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + + if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { + memcpy(buf, &w1_buf, DS2438_PAGE_SIZE); + ret = DS2438_PAGE_SIZE; + } else + ret = -EIO; + + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static ssize_t temperature_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + ssize_t c = PAGE_SIZE; + int16_t temp; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + if (w1_ds2438_get_temperature(sl, &temp) == 0) { + c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", temp); + ret = PAGE_SIZE - c; + } else + ret = -EIO; + + return ret; +} + +static ssize_t vad_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + ssize_t c = PAGE_SIZE; + uint16_t voltage; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) { + c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage); + ret = PAGE_SIZE - c; + } else + ret = -EIO; + + return ret; +} + +static ssize_t vdd_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + ssize_t c = PAGE_SIZE; + uint16_t voltage; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) { + c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage); + ret = PAGE_SIZE - c; + } else + ret = -EIO; + + return ret; +} + +static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, NULL, iad_write, 1); +static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE); +static BIN_ATTR_RO(temperature, 0/* real length varies */); +static BIN_ATTR_RO(vad, 0/* real length varies */); +static BIN_ATTR_RO(vdd, 0/* real length varies */); + +static struct bin_attribute *w1_ds2438_bin_attrs[] = { + &bin_attr_iad, + &bin_attr_page0, + &bin_attr_temperature, + &bin_attr_vad, + &bin_attr_vdd, + NULL, +}; + +static const struct attribute_group w1_ds2438_group = { + .bin_attrs = w1_ds2438_bin_attrs, +}; + +static const struct attribute_group *w1_ds2438_groups[] = { + &w1_ds2438_group, + NULL, +}; + +static struct w1_family_ops w1_ds2438_fops = { + .groups = w1_ds2438_groups, +}; + +static struct w1_family w1_ds2438_family = { + .fid = W1_FAMILY_DS2438, + .fops = &w1_ds2438_fops, +}; +module_w1_family(w1_ds2438_family); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>"); +MODULE_DESCRIPTION("1-wire driver for Maxim/Dallas DS2438 Smart Battery Monitor"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2438)); diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h index 58e774141568..24168c94eeae 100644 --- a/drivers/w1/slaves/w1_ds2760.h +++ b/drivers/w1/slaves/w1_ds2760.h @@ -24,11 +24,13 @@ #define DS2760_DATA_SIZE 0x40 #define DS2760_PROTECTION_REG 0x00 + #define DS2760_STATUS_REG 0x01 - #define DS2760_STATUS_IE (1 << 2) - #define DS2760_STATUS_SWEN (1 << 3) - #define DS2760_STATUS_RNAOP (1 << 4) - #define DS2760_STATUS_PMOD (1 << 5) +#define DS2760_STATUS_IE (1 << 2) +#define DS2760_STATUS_SWEN (1 << 3) +#define DS2760_STATUS_RNAOP (1 << 4) +#define DS2760_STATUS_PMOD (1 << 5) + #define DS2760_EEPROM_REG 0x07 #define DS2760_SPECIAL_FEATURE_REG 0x08 #define DS2760_VOLTAGE_MSB 0x0c diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 90a3d9338fd2..8511d1685db9 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -29,7 +29,6 @@ #include <linux/atomic.h> #include "w1.h" -#include "w1_log.h" #include "w1_int.h" #include "w1_family.h" #include "w1_netlink.h" diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index c4a6b257a367..869a3ff87d29 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -29,6 +29,7 @@ #define W1_COUNTER_DS2423 0x1D #define W1_THERM_DS1822 0x22 #define W1_EEPROM_DS2433 0x23 +#define W1_FAMILY_DS2438 0x26 #define W1_THERM_DS18B20 0x28 #define W1_FAMILY_DS2408 0x29 #define W1_EEPROM_DS2431 0x2D diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c index 2cae7b29bb5f..1072a2e620bb 100644 --- a/drivers/w1/w1_int.c +++ b/drivers/w1/w1_int.c @@ -22,7 +22,6 @@ #include <linux/moduleparam.h> #include "w1.h" -#include "w1_log.h" #include "w1_netlink.h" #include "w1_int.h" diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index de8bebc27896..1134e6b1eb02 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include "w1.h" -#include "w1_log.h" static int w1_delay_parm = 1; module_param_named(delay_coef, w1_delay_parm, int, 0); diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h deleted file mode 100644 index dd1422b6afbb..000000000000 --- a/drivers/w1/w1_log.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __W1_LOG_H -#define __W1_LOG_H - -#define DEBUG - -#ifdef W1_DEBUG -# define assert(expr) do {} while (0) -#else -# define assert(expr) \ - if(unlikely(!(expr))) { \ - pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } -#endif - -#endif /* __W1_LOG_H */ - diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c index 49e520ca79c5..027950f997d1 100644 --- a/drivers/w1/w1_netlink.c +++ b/drivers/w1/w1_netlink.c @@ -18,13 +18,10 @@ #include <linux/connector.h> #include "w1.h" -#include "w1_log.h" #include "w1_netlink.h" #if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE))) -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) - /* Bundle together everything required to process a request in one memory * allocation. */ @@ -598,7 +595,7 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp) sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd)); } - reply_size = MIN(CONNECTOR_MAX_MSG_SIZE, reply_size); + reply_size = min(CONNECTOR_MAX_MSG_SIZE, reply_size); /* allocate space for the block, a copy of the original message, * one node per cmd to point into the original message, diff --git a/drivers/zorro/zorro-driver.c b/drivers/zorro/zorro-driver.c index eacae1434b73..fa23b7366b98 100644 --- a/drivers/zorro/zorro-driver.c +++ b/drivers/zorro/zorro-driver.c @@ -14,6 +14,8 @@ #include <linux/module.h> #include <linux/zorro.h> +#include "zorro.h" + /** * zorro_match_device - Tell if a Zorro device structure has a matching @@ -161,12 +163,13 @@ static int zorro_uevent(struct device *dev, struct kobj_uevent_env *env) } struct bus_type zorro_bus_type = { - .name = "zorro", - .dev_name = "zorro", - .match = zorro_bus_match, - .uevent = zorro_uevent, - .probe = zorro_device_probe, - .remove = zorro_device_remove, + .name = "zorro", + .dev_name = "zorro", + .dev_groups = zorro_device_attribute_groups, + .match = zorro_bus_match, + .uevent = zorro_uevent, + .probe = zorro_device_probe, + .remove = zorro_device_remove, }; EXPORT_SYMBOL(zorro_bus_type); diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c index 9282dbf5abdb..3d34dba9bb2d 100644 --- a/drivers/zorro/zorro-sysfs.c +++ b/drivers/zorro/zorro-sysfs.c @@ -23,33 +23,33 @@ /* show configuration fields */ #define zorro_config_attr(name, field, format_string) \ -static ssize_t \ -show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ struct zorro_dev *z; \ \ z = to_zorro_dev(dev); \ return sprintf(buf, format_string, z->field); \ } \ -static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); +static DEVICE_ATTR_RO(name); zorro_config_attr(id, id, "0x%08x\n"); zorro_config_attr(type, rom.er_Type, "0x%02x\n"); zorro_config_attr(slotaddr, slotaddr, "0x%04x\n"); zorro_config_attr(slotsize, slotsize, "0x%04x\n"); -static ssize_t -show_serial(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t serial_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct zorro_dev *z; z = to_zorro_dev(dev); return sprintf(buf, "0x%08x\n", be32_to_cpu(z->rom.er_SerialNumber)); } +static DEVICE_ATTR_RO(serial); -static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL); - -static ssize_t zorro_show_resource(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t resource_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct zorro_dev *z = to_zorro_dev(dev); @@ -58,8 +58,27 @@ static ssize_t zorro_show_resource(struct device *dev, struct device_attribute * (unsigned long)zorro_resource_end(z), zorro_resource_flags(z)); } +static DEVICE_ATTR_RO(resource); + +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct zorro_dev *z = to_zorro_dev(dev); -static DEVICE_ATTR(resource, S_IRUGO, zorro_show_resource, NULL); + return sprintf(buf, ZORRO_DEVICE_MODALIAS_FMT "\n", z->id); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *zorro_device_attrs[] = { + &dev_attr_id.attr, + &dev_attr_type.attr, + &dev_attr_serial.attr, + &dev_attr_slotaddr.attr, + &dev_attr_slotsize.attr, + &dev_attr_resource.attr, + &dev_attr_modalias.attr, + NULL +}; static ssize_t zorro_read_config(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, @@ -88,32 +107,17 @@ static struct bin_attribute zorro_config_attr = { .read = zorro_read_config, }; -static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct zorro_dev *z = to_zorro_dev(dev); - - return sprintf(buf, ZORRO_DEVICE_MODALIAS_FMT "\n", z->id); -} - -static DEVICE_ATTR(modalias, S_IRUGO, modalias_show, NULL); +static struct bin_attribute *zorro_device_bin_attrs[] = { + &zorro_config_attr, + NULL +}; -int zorro_create_sysfs_dev_files(struct zorro_dev *z) -{ - struct device *dev = &z->dev; - int error; - - /* current configuration's attributes */ - if ((error = device_create_file(dev, &dev_attr_id)) || - (error = device_create_file(dev, &dev_attr_type)) || - (error = device_create_file(dev, &dev_attr_serial)) || - (error = device_create_file(dev, &dev_attr_slotaddr)) || - (error = device_create_file(dev, &dev_attr_slotsize)) || - (error = device_create_file(dev, &dev_attr_resource)) || - (error = device_create_file(dev, &dev_attr_modalias)) || - (error = sysfs_create_bin_file(&dev->kobj, &zorro_config_attr))) - return error; - - return 0; -} +static const struct attribute_group zorro_device_attr_group = { + .attrs = zorro_device_attrs, + .bin_attrs = zorro_device_bin_attrs, +}; +const struct attribute_group *zorro_device_attribute_groups[] = { + &zorro_device_attr_group, + NULL +}; diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c index d295d9878dff..cc1b1ac57d61 100644 --- a/drivers/zorro/zorro.c +++ b/drivers/zorro/zorro.c @@ -197,9 +197,6 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) put_device(&z->dev); continue; } - error = zorro_create_sysfs_dev_files(z); - if (error) - dev_err(&z->dev, "Error creating sysfs files\n"); } /* Mark all available Zorro II memory */ diff --git a/drivers/zorro/zorro.h b/drivers/zorro/zorro.h index 34119fb4e560..4f805c01cfbc 100644 --- a/drivers/zorro/zorro.h +++ b/drivers/zorro/zorro.h @@ -5,5 +5,4 @@ extern void zorro_name_device(struct zorro_dev *z); static inline void zorro_name_device(struct zorro_dev *dev) { } #endif -extern int zorro_create_sysfs_dev_files(struct zorro_dev *z); - +extern const struct attribute_group *zorro_device_attribute_groups[]; diff --git a/fs/char_dev.c b/fs/char_dev.c index 44a240c4bb65..fb8507f521b2 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -471,6 +471,85 @@ int cdev_add(struct cdev *p, dev_t dev, unsigned count) return 0; } +/** + * cdev_set_parent() - set the parent kobject for a char device + * @p: the cdev structure + * @kobj: the kobject to take a reference to + * + * cdev_set_parent() sets a parent kobject which will be referenced + * appropriately so the parent is not freed before the cdev. This + * should be called before cdev_add. + */ +void cdev_set_parent(struct cdev *p, struct kobject *kobj) +{ + WARN_ON(!kobj->state_initialized); + p->kobj.parent = kobj; +} + +/** + * cdev_device_add() - add a char device and it's corresponding + * struct device, linkink + * @dev: the device structure + * @cdev: the cdev structure + * + * cdev_device_add() adds the char device represented by @cdev to the system, + * just as cdev_add does. It then adds @dev to the system using device_add + * The dev_t for the char device will be taken from the struct device which + * needs to be initialized first. This helper function correctly takes a + * reference to the parent device so the parent will not get released until + * all references to the cdev are released. + * + * This helper uses dev->devt for the device number. If it is not set + * it will not add the cdev and it will be equivalent to device_add. + * + * This function should be used whenever the struct cdev and the + * struct device are members of the same structure whose lifetime is + * managed by the struct device. + * + * NOTE: Callers must assume that userspace was able to open the cdev and + * can call cdev fops callbacks at any time, even if this function fails. + */ +int cdev_device_add(struct cdev *cdev, struct device *dev) +{ + int rc = 0; + + if (dev->devt) { + cdev_set_parent(cdev, &dev->kobj); + + rc = cdev_add(cdev, dev->devt, 1); + if (rc) + return rc; + } + + rc = device_add(dev); + if (rc) + cdev_del(cdev); + + return rc; +} + +/** + * cdev_device_del() - inverse of cdev_device_add + * @dev: the device structure + * @cdev: the cdev structure + * + * cdev_device_del() is a helper function to call cdev_del and device_del. + * It should be used whenever cdev_device_add is used. + * + * If dev->devt is not set it will not remove the cdev and will be equivalent + * to device_del. + * + * NOTE: This guarantees that associated sysfs callbacks are not running + * or runnable, however any cdevs already open will remain and their fops + * will still be callable even after this function returns. + */ +void cdev_device_del(struct cdev *cdev, struct device *dev) +{ + device_del(dev); + if (dev->devt) + cdev_del(cdev); +} + static void cdev_unmap(dev_t dev, unsigned count) { kobj_unmap(cdev_map, dev, count); @@ -482,6 +561,10 @@ static void cdev_unmap(dev_t dev, unsigned count) * * cdev_del() removes @p from the system, possibly freeing the structure * itself. + * + * NOTE: This guarantees that cdev device will no longer be able to be + * opened, however any cdevs already open will remain and their fops will + * still be callable even after cdev_del returns. */ void cdev_del(struct cdev *p) { @@ -570,5 +653,8 @@ EXPORT_SYMBOL(cdev_init); EXPORT_SYMBOL(cdev_alloc); EXPORT_SYMBOL(cdev_del); EXPORT_SYMBOL(cdev_add); +EXPORT_SYMBOL(cdev_set_parent); +EXPORT_SYMBOL(cdev_device_add); +EXPORT_SYMBOL(cdev_device_del); EXPORT_SYMBOL(__register_chrdev); EXPORT_SYMBOL(__unregister_chrdev); diff --git a/include/linux/cdev.h b/include/linux/cdev.h index f8763615a5f2..408bc09ce497 100644 --- a/include/linux/cdev.h +++ b/include/linux/cdev.h @@ -4,6 +4,7 @@ #include <linux/kobject.h> #include <linux/kdev_t.h> #include <linux/list.h> +#include <linux/device.h> struct file_operations; struct inode; @@ -26,6 +27,10 @@ void cdev_put(struct cdev *p); int cdev_add(struct cdev *, dev_t, unsigned); +void cdev_set_parent(struct cdev *p, struct kobject *kobj); +int cdev_device_add(struct cdev *cdev, struct device *dev); +void cdev_device_del(struct cdev *cdev, struct device *dev); + void cdev_del(struct cdev *); void cd_forget(struct inode *); diff --git a/include/linux/fpga/altera-pr-ip-core.h b/include/linux/fpga/altera-pr-ip-core.h new file mode 100644 index 000000000000..3810a9033f49 --- /dev/null +++ b/include/linux/fpga/altera-pr-ip-core.h @@ -0,0 +1,29 @@ +/* + * Driver for Altera Partial Reconfiguration IP Core + * + * Copyright (C) 2016 Intel Corporation + * + * Based on socfpga-a10.c Copyright (C) 2015-2016 Altera Corporation + * by Alan Tull <atull@opensource.altera.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ALT_PR_IP_CORE_H +#define _ALT_PR_IP_CORE_H +#include <linux/io.h> + +int alt_pr_register(struct device *dev, void __iomem *reg_base); +int alt_pr_unregister(struct device *dev); + +#endif /* _ALT_PR_IP_CORE_H */ diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h index 57beb5d09bfc..b4ac24c4411d 100644 --- a/include/linux/fpga/fpga-mgr.h +++ b/include/linux/fpga/fpga-mgr.h @@ -70,17 +70,21 @@ enum fpga_mgr_states { */ #define FPGA_MGR_PARTIAL_RECONFIG BIT(0) #define FPGA_MGR_EXTERNAL_CONFIG BIT(1) +#define FPGA_MGR_ENCRYPTED_BITSTREAM BIT(2) /** * struct fpga_image_info - information specific to a FPGA image * @flags: boolean flags as defined above * @enable_timeout_us: maximum time to enable traffic through bridge (uSec) * @disable_timeout_us: maximum time to disable traffic through bridge (uSec) + * @config_complete_timeout_us: maximum time for FPGA to switch to operating + * status in the write_complete op. */ struct fpga_image_info { u32 flags; u32 enable_timeout_us; u32 disable_timeout_us; + u32 config_complete_timeout_us; }; /** diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 0c170a3f0d8b..e09fc8290c2f 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -491,6 +491,12 @@ struct vmbus_channel_rescind_offer { u32 child_relid; } __packed; +static inline u32 +hv_ringbuffer_pending_size(const struct hv_ring_buffer_info *rbi) +{ + return rbi->ring_buffer->pending_send_sz; +} + /* * Request Offer -- no parameters, SynIC message contains the partition ID * Set Snoop -- no parameters, SynIC message contains the partition ID @@ -524,10 +530,10 @@ struct vmbus_channel_open_channel { u32 target_vp; /* - * The upstream ring buffer begins at offset zero in the memory - * described by RingBufferGpadlHandle. The downstream ring buffer - * follows it at this offset (in pages). - */ + * The upstream ring buffer begins at offset zero in the memory + * described by RingBufferGpadlHandle. The downstream ring buffer + * follows it at this offset (in pages). + */ u32 downstream_ringbuffer_pageoffset; /* User-specific data to be passed along to the server endpoint. */ @@ -1013,7 +1019,7 @@ extern int vmbus_open(struct vmbus_channel *channel, u32 recv_ringbuffersize, void *userdata, u32 userdatalen, - void(*onchannel_callback)(void *context), + void (*onchannel_callback)(void *context), void *context); extern void vmbus_close(struct vmbus_channel *channel); @@ -1155,6 +1161,17 @@ static inline void *hv_get_drvdata(struct hv_device *dev) return dev_get_drvdata(&dev->device); } +struct hv_ring_buffer_debug_info { + u32 current_interrupt_mask; + u32 current_read_index; + u32 current_write_index; + u32 bytes_avail_toread; + u32 bytes_avail_towrite; +}; + +void hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, + struct hv_ring_buffer_debug_info *debug_info); + /* Vmbus interface */ #define vmbus_driver_register(driver) \ __vmbus_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) @@ -1428,7 +1445,7 @@ struct hyperv_service_callback { char *log_msg; uuid_le data; struct vmbus_channel *channel; - void (*callback) (void *context); + void (*callback)(void *context); }; #define MAX_SRV_VER 0x7ffffff @@ -1504,8 +1521,6 @@ static inline void hv_signal_on_read(struct vmbus_channel *channel) cached_write_sz = hv_get_cached_bytes_to_write(rbi); if (cached_write_sz < pending_sz) vmbus_setevent(channel); - - return; } /* diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 32c0e83d6239..3c85c81b0027 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -23,11 +23,13 @@ struct uio_map; /** * struct uio_mem - description of a UIO memory region * @name: name of the memory region for identification - * @addr: address of the device's memory (phys_addr is used since - * addr can be logical, virtual, or physical & phys_addr_t - * should always be large enough to handle any of the - * address types) - * @size: size of IO + * @addr: address of the device's memory rounded to page + * size (phys_addr is used since addr can be + * logical, virtual, or physical & phys_addr_t + * should always be large enough to handle any of + * the address types) + * @offs: offset of device memory within the page + * @size: size of IO (multiple of page size) * @memtype: type of memory addr points to * @internal_addr: ioremap-ped version of addr, for driver internal use * @map: for use by the UIO core only. @@ -35,6 +37,7 @@ struct uio_map; struct uio_mem { const char *name; phys_addr_t addr; + unsigned long offs; resource_size_t size; int memtype; void __iomem *internal_addr; diff --git a/include/linux/vme.h b/include/linux/vme.h index ec5e8bf6118e..25874da3f2e1 100644 --- a/include/linux/vme.h +++ b/include/linux/vme.h @@ -92,7 +92,7 @@ extern struct bus_type vme_bus_type; #define VME_SLOT_ALL -2 /** - * Structure representing a VME device + * struct vme_dev - Structure representing a VME device * @num: The device number * @bridge: Pointer to the bridge device this device is on * @dev: Internal device structure @@ -107,6 +107,16 @@ struct vme_dev { struct list_head bridge_list; }; +/** + * struct vme_driver - Structure representing a VME driver + * @name: Driver name, should be unique among VME drivers and usually the same + * as the module name. + * @match: Callback used to determine whether probe should be run. + * @probe: Callback for device binding, called when new device is detected. + * @remove: Callback, called on device removal. + * @driver: Underlying generic device driver structure. + * @devices: List of VME devices (struct vme_dev) associated with this driver. + */ struct vme_driver { const char *name; int (*match)(struct vme_dev *); diff --git a/include/misc/charlcd.h b/include/misc/charlcd.h new file mode 100644 index 000000000000..23f61850f363 --- /dev/null +++ b/include/misc/charlcd.h @@ -0,0 +1,42 @@ +/* + * Character LCD driver for Linux + * + * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> + * Copyright (C) 2016-2017 Glider bvba + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +struct charlcd { + const struct charlcd_ops *ops; + const unsigned char *char_conv; /* Optional */ + + int ifwidth; /* 4-bit or 8-bit (default) */ + int height; + int width; + int bwidth; /* Default set by charlcd_alloc() */ + int hwidth; /* Default set by charlcd_alloc() */ + + void *drvdata; /* Set by charlcd_alloc() */ +}; + +struct charlcd_ops { + /* Required */ + void (*write_cmd)(struct charlcd *lcd, int cmd); + void (*write_data)(struct charlcd *lcd, int data); + + /* Optional */ + void (*write_cmd_raw4)(struct charlcd *lcd, int cmd); /* 4-bit only */ + void (*clear_fast)(struct charlcd *lcd); + void (*backlight)(struct charlcd *lcd, int on); +}; + +struct charlcd *charlcd_alloc(unsigned int drvdata_size); + +int charlcd_register(struct charlcd *lcd); +int charlcd_unregister(struct charlcd *lcd); + +void charlcd_poke(struct charlcd *lcd); diff --git a/include/uapi/linux/aspeed-lpc-ctrl.h b/include/uapi/linux/aspeed-lpc-ctrl.h new file mode 100644 index 000000000000..c328c976c684 --- /dev/null +++ b/include/uapi/linux/aspeed-lpc-ctrl.h @@ -0,0 +1,61 @@ +/* + * Copyright 2017 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_ASPEED_LPC_CTRL_H +#define _UAPI_LINUX_ASPEED_LPC_CTRL_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/* Window types */ +#define ASPEED_LPC_CTRL_WINDOW_FLASH 1 +#define ASPEED_LPC_CTRL_WINDOW_MEMORY 2 + +/* + * This driver provides a window for the host to access a BMC resource + * across the BMC <-> Host LPC bus. + * + * window_type: The BMC resource that the host will access through the + * window. BMC flash and BMC RAM. + * + * window_id: For each window type there may be multiple windows, + * these are referenced by ID. + * + * flags: Reserved for future use, this field is expected to be + * zeroed. + * + * addr: Address on the host LPC bus that the specified window should + * be mapped. This address must be power of two aligned. + * + * offset: Offset into the BMC window that should be mapped to the + * host (at addr). This must be a multiple of size. + * + * size: The size of the mapping. The smallest possible size is 64K. + * This must be power of two aligned. + * + */ + +struct aspeed_lpc_ctrl_mapping { + __u8 window_type; + __u8 window_id; + __u16 flags; + __u32 addr; + __u32 offset; + __u32 size; +}; + +#define __ASPEED_LPC_CTRL_IOCTL_MAGIC 0xb2 + +#define ASPEED_LPC_CTRL_IOCTL_GET_SIZE _IOWR(__ASPEED_LPC_CTRL_IOCTL_MAGIC, \ + 0x00, struct aspeed_lpc_ctrl_mapping) + +#define ASPEED_LPC_CTRL_IOCTL_MAP _IOW(__ASPEED_LPC_CTRL_IOCTL_MAGIC, \ + 0x01, struct aspeed_lpc_ctrl_mapping) + +#endif /* _UAPI_LINUX_ASPEED_LPC_CTRL_H */ diff --git a/include/uapi/linux/pps.h b/include/uapi/linux/pps.h index a9bb1d93451a..c1cb3825a8bc 100644 --- a/include/uapi/linux/pps.h +++ b/include/uapi/linux/pps.h @@ -55,6 +55,12 @@ struct pps_ktime { __s32 nsec; __u32 flags; }; + +struct pps_ktime_compat { + __s64 sec; + __s32 nsec; + __u32 flags; +} __attribute__((packed, aligned(4))); #define PPS_TIME_INVALID (1<<0) /* used to specify timeout==NULL */ struct pps_kinfo { @@ -65,6 +71,14 @@ struct pps_kinfo { int current_mode; /* current mode bits */ }; +struct pps_kinfo_compat { + __u32 assert_sequence; /* seq. num. of assert event */ + __u32 clear_sequence; /* seq. num. of clear event */ + struct pps_ktime_compat assert_tu; /* time of assert event */ + struct pps_ktime_compat clear_tu; /* time of clear event */ + int current_mode; /* current mode bits */ +}; + struct pps_kparams { int api_version; /* API version # */ int mode; /* mode bits */ @@ -114,6 +128,11 @@ struct pps_fdata { struct pps_ktime timeout; }; +struct pps_fdata_compat { + struct pps_kinfo_compat info; + struct pps_ktime_compat timeout; +}; + struct pps_bind_args { int tsformat; /* format of time stamps */ int edge; /* selected event type */ diff --git a/samples/mei/TODO b/samples/mei/TODO deleted file mode 100644 index 6b3625d3058c..000000000000 --- a/samples/mei/TODO +++ /dev/null @@ -1,2 +0,0 @@ -TODO: - - Cleanup and split the timer function diff --git a/scripts/ver_linux b/scripts/ver_linux index 430b201f3e25..b51de8a7e2a3 100755 --- a/scripts/ver_linux +++ b/scripts/ver_linux @@ -1,4 +1,4 @@ -#!/bin/awk -f +#!/usr/bin/awk -f # Before running this script please ensure that your PATH is # typical as you use for compilation/installation. I use # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may |