aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c66
-rw-r--r--arch/arm/mach-omap2/clock2420_data.c19
-rw-r--r--arch/arm/mach-omap2/clock2430_data.c19
-rw-r--r--arch/arm/mach-omap2/clock2xxx.h2
4 files changed, 70 insertions, 36 deletions
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 311599405bfa..ad658fc6baef 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -1,7 +1,7 @@
/*
* OMAP2xxx DVFS virtual clock functions
*
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
@@ -46,6 +46,13 @@
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
+/*
+ * sys_ck_rate: the rate of the external high-frequency clock
+ * oscillator on the board. Set by the SoC-specific clock init code.
+ * Once set during a boot, will not change.
+ */
+static unsigned long sys_ck_rate;
+
/**
* omap2_table_mpu_recalc - just return the MPU speed
* @clk: virt_prcm_set struct clk
@@ -67,15 +74,14 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
const struct prcm_config *ptr;
- long highest_rate, sys_clk_rate;
+ long highest_rate;
highest_rate = -EINVAL;
- sys_clk_rate = __clk_get_rate(sclk);
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
- if (ptr->xtal_speed != sys_clk_rate)
+ if (ptr->xtal_speed != sys_ck_rate)
continue;
highest_rate = ptr->mpu_speed;
@@ -94,15 +100,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
- long sys_clk_rate;
-
- sys_clk_rate = __clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_clk_rate)
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
if (prcm->mpu_speed <= rate) {
@@ -168,3 +171,50 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
return 0;
}
+
+/**
+ * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate
+ * table sets matches the current CORE DPLL hardware rate
+ *
+ * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set'
+ * global to point to the active rate set when found; otherwise, sets
+ * it to NULL. No return value;
+ */
+void omap2xxx_clkt_vps_check_bootloader_rates(void)
+{
+ const struct prcm_config *prcm = NULL;
+ unsigned long rate;
+
+ rate = omap2xxx_clk_get_core_rate();
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+ if (prcm->dpll_speed <= rate)
+ break;
+ }
+ curr_prcm_set = prcm;
+}
+
+/**
+ * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
+ *
+ * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
+ * code. (The sys_ck rate does not -- or rather, must not -- change
+ * during kernel runtime.) Must be called after we have a valid
+ * sys_ck rate, but before the virt_prcm_set clock rate is
+ * recalculated. No return value.
+ */
+void omap2xxx_clkt_vps_late_init(void)
+{
+ struct clk *c;
+
+ c = clk_get(NULL, "sys_ck");
+ if (IS_ERR(c)) {
+ WARN(1, "could not locate sys_ck\n");
+ } else {
+ sys_ck_rate = clk_get_rate(c);
+ clk_put(c);
+ }
+}
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index d1034858b87a..1d1d77e510a3 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2420 clock data
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
@@ -1925,9 +1925,7 @@ static struct omap_clk omap2420_clks[] = {
int __init omap2420_clk_init(void)
{
- const struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate;
prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
@@ -1950,20 +1948,13 @@ int __init omap2420_clk_init(void)
omap2_init_clk_clkdm(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
/* Disable autoidle on all clocks; let the PM code enable it later */
omap_clk_disable_autoidle_all();
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate();
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
+ /* XXX Can this be done from the virt_prcm_set clk init function? */
+ omap2xxx_clkt_vps_check_bootloader_rates();
recalculate_root_clocks();
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 3e16eab4691d..15d859ae283b 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2430 clock data
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
@@ -2024,9 +2024,7 @@ static struct omap_clk omap2430_clks[] = {
int __init omap2430_clk_init(void)
{
- const struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate;
prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
@@ -2049,20 +2047,13 @@ int __init omap2430_clk_init(void)
omap2_init_clk_clkdm(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
/* Disable autoidle on all clocks; let the PM code enable it later */
omap_clk_disable_autoidle_all();
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate();
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
+ /* XXX Can this be done from the virt_prcm_set clk init function? */
+ omap2xxx_clkt_vps_check_bootloader_rates();
recalculate_root_clocks();
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index 19dc065901c7..25b8d0207527 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -20,6 +20,8 @@ u32 omap2xxx_get_apll_clkin(void);
u32 omap2xxx_get_sysclkdiv(void);
void omap2xxx_clk_prepare_for_reboot(void);
void omap2xxx_clkt_dpllcore_init(struct clk *clk);
+void omap2xxx_clkt_vps_check_bootloader_rates(void);
+void omap2xxx_clkt_vps_late_init(void);
#ifdef CONFIG_SOC_OMAP2420
int omap2420_clk_init(void);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 14:25:16 +0000