diff options
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 40 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 21 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 120 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/usb.c | 4 |
5 files changed, 102 insertions, 87 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 34c993dd0602..fa35b23bbaa7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -287,6 +287,9 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, s32 retry = 0; int ret; + if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM) + return -ENOMEDIUM; + /* * figure out how to read the register based on address range * 0x00 ~ 0x7FF: function 0 CCCR and FBR @@ -306,9 +309,12 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, usleep_range(1000, 2000); ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz, data, write); - } while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); + } while (ret != 0 && ret != -ENOMEDIUM && + retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); - if (ret != 0) + if (ret == -ENOMEDIUM) + brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM); + else if (ret != 0) brcmf_err("failed with %d\n", ret); return ret; @@ -320,6 +326,9 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) int err = 0, i; u8 addr[3]; + if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM) + return -ENOMEDIUM; + addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK; addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK; addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK; @@ -429,6 +438,7 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, bool write, u32 addr, struct sk_buff *pkt) { unsigned int req_sz; + int err; brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait); if (brcmf_sdiod_pm_resume_error(sdiodev)) @@ -439,18 +449,18 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, req_sz &= (uint)~3; if (write) - return sdio_memcpy_toio(sdiodev->func[fn], addr, - ((u8 *)(pkt->data)), - req_sz); + err = sdio_memcpy_toio(sdiodev->func[fn], addr, + ((u8 *)(pkt->data)), req_sz); else if (fn == 1) - return sdio_memcpy_fromio(sdiodev->func[fn], - ((u8 *)(pkt->data)), - addr, req_sz); + err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)), + addr, req_sz); else /* function 2 read is FIFO operation */ - return sdio_readsb(sdiodev->func[fn], - ((u8 *)(pkt->data)), addr, - req_sz); + err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr, + req_sz); + if (err == -ENOMEDIUM) + brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM); + return err; } /** @@ -593,7 +603,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req); ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error; - if (ret != 0) { + if (ret == -ENOMEDIUM) { + brcmf_bus_change_state(sdiodev->bus_if, + BRCMF_BUS_NOMEDIUM); + break; + } else if (ret != 0) { brcmf_err("CMD53 sg block %s failed %d\n", write ? "write" : "read", ret); ret = -EIO; @@ -852,8 +866,6 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn) static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev) { - sdiodev->bus_if->state = BRCMF_BUS_DOWN; - if (sdiodev->bus) { brcmf_sdio_remove(sdiodev->bus); sdiodev->bus = NULL; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 5c12a07673fa..c4535616064e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -17,8 +17,12 @@ #ifndef _BRCMF_BUS_H_ #define _BRCMF_BUS_H_ +#include "dhd_dbg.h" + /* The level of bus communication with the dongle */ enum brcmf_bus_state { + BRCMF_BUS_UNKNOWN, /* Not determined yet */ + BRCMF_BUS_NOMEDIUM, /* No medium access to dongle */ BRCMF_BUS_DOWN, /* Not ready for frame transfers */ BRCMF_BUS_LOAD, /* Download access only (CPU reset) */ BRCMF_BUS_DATA /* Ready for frame transfers */ @@ -144,6 +148,23 @@ struct pktq *brcmf_bus_gettxq(struct brcmf_bus *bus) return bus->ops->gettxq(bus->dev); } + +static inline bool brcmf_bus_ready(struct brcmf_bus *bus) +{ + return bus->state == BRCMF_BUS_LOAD || bus->state == BRCMF_BUS_DATA; +} + +static inline void brcmf_bus_change_state(struct brcmf_bus *bus, + enum brcmf_bus_state new_state) +{ + /* NOMEDIUM is permanent */ + if (bus->state == BRCMF_BUS_NOMEDIUM) + return; + + brcmf_dbg(TRACE, "%d -> %d\n", bus->state, new_state); + bus->state = new_state; +} + /* * interface functions from common layer */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index af39edae8c62..d4d966beb840 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -934,7 +934,7 @@ int brcmf_bus_start(struct device *dev) p2p_ifp = NULL; /* signal bus ready */ - bus_if->state = BRCMF_BUS_DATA; + brcmf_bus_change_state(bus_if, BRCMF_BUS_DATA); /* Bus is ready, do any initialization */ ret = brcmf_c_preinit_dcmds(ifp); @@ -1029,6 +1029,8 @@ void brcmf_detach(struct device *dev) /* stop firmware event handling */ brcmf_fweh_detach(drvr); + brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN); + /* make sure primary interface removed last */ for (i = BRCMF_MAX_IFS-1; i > -1; i--) if (drvr->iflist[i]) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index ef24a1bd24a7..3e991897d7ca 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1082,10 +1082,6 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) /* Clear partial in any case */ bus->cur_read.len = 0; - - /* If we can't reach the device, signal failure */ - if (err) - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } /* return total length of buffer chain */ @@ -1682,8 +1678,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) bus->rxpending = true; for (rd->seq_num = bus->rx_seq, rxleft = maxframes; - !bus->rxskip && rxleft && - bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN; + !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if); rd->seq_num++, rxleft--) { /* Handle glomming separately */ @@ -2232,39 +2227,37 @@ static void brcmf_sdio_bus_stop(struct device *dev) bus->watchdog_tsk = NULL; } - sdio_claim_host(bus->sdiodev->func[1]); - - /* Enable clock for device interrupts */ - brcmf_sdio_bus_sleep(bus, false, false); + if (bus_if->state == BRCMF_BUS_DOWN) { + sdio_claim_host(sdiodev->func[1]); + + /* Enable clock for device interrupts */ + brcmf_sdio_bus_sleep(bus, false, false); + + /* Disable and clear interrupts at the chip level also */ + w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); + local_hostintmask = bus->hostintmask; + bus->hostintmask = 0; + + /* Force backplane clocks to assure F2 interrupt propagates */ + saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if (!err) + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + if (err) + brcmf_err("Failed to force clock for F2: err %d\n", + err); - /* Disable and clear interrupts at the chip level also */ - w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); - local_hostintmask = bus->hostintmask; - bus->hostintmask = 0; + /* Turn off the bus (F2), free any pending packets */ + brcmf_dbg(INTR, "disable SDIO interrupts\n"); + sdio_disable_func(sdiodev->func[SDIO_FUNC_2]); - /* Change our idea of bus state */ - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; + /* Clear any pending interrupts now that F2 is disabled */ + w_sdreg32(bus, local_hostintmask, + offsetof(struct sdpcmd_regs, intstatus)); - /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); - if (!err) { - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + sdio_release_host(sdiodev->func[1]); } - if (err) - brcmf_err("Failed to force clock for F2: err %d\n", err); - - /* Turn off the bus (F2), free any pending packets */ - brcmf_dbg(INTR, "disable SDIO interrupts\n"); - sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); - - /* Clear any pending interrupts now that F2 is disabled */ - w_sdreg32(bus, local_hostintmask, - offsetof(struct sdpcmd_regs, intstatus)); - - sdio_release_host(bus->sdiodev->func[1]); - /* Clear the data packet queues */ brcmu_pktq_flush(&bus->txq, true, NULL, NULL); @@ -2354,20 +2347,11 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) /* Check for inconsistent device control */ devctl = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_DEVICE_CTL, &err); - if (err) { - brcmf_err("error reading DEVCTL: %d\n", err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } #endif /* DEBUG */ /* Read CSR, if clock on switch to AVAIL, else ignore */ clkctl = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); - if (err) { - brcmf_err("error reading CSR: %d\n", - err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", devctl, clkctl); @@ -2375,19 +2359,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) if (SBSDIO_HTAV(clkctl)) { devctl = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_DEVICE_CTL, &err); - if (err) { - brcmf_err("error reading DEVCTL: %d\n", - err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, devctl, &err); - if (err) { - brcmf_err("error writing DEVCTL: %d\n", - err); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - } bus->clkstate = CLK_AVAIL; } } @@ -2522,9 +2496,8 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) txlimit -= framecnt; } - if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) { + if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) { brcmf_err("failed backplane access over SDIO, halting operation\n"); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; atomic_set(&bus->intstatus, 0); } else if (atomic_read(&bus->intstatus) || atomic_read(&bus->ipend) > 0 || @@ -3356,7 +3329,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) } /* Allow HT Clock now that the ARM is running. */ - bus->sdiodev->bus_if->state = BRCMF_BUS_LOAD; + brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD); bcmerror = 0; err: @@ -3633,7 +3606,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus) return; } - if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { + if (!brcmf_bus_ready(bus->sdiodev->bus_if)) { brcmf_err("bus is down. we have nothing to do\n"); return; } @@ -3644,7 +3617,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus) else if (brcmf_sdio_intr_rstatus(bus)) { brcmf_err("failed backplane access\n"); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } /* Disable additional interrupts (is this needed now)? */ @@ -3781,6 +3753,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) goto fail; } + /* SDIO register access works so moving + * state from UNKNOWN to DOWN. + */ + brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN); + if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) { brcmf_err("brcmf_sdio_chip_attach failed!\n"); goto fail; @@ -4004,7 +3981,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) /* Disable F2 to clear any intermediate frame state on the dongle */ sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; bus->rxflow = false; /* Done with backplane-dependent accesses, can drop clock... */ @@ -4060,16 +4036,20 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) } if (bus->ci) { - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_clkctl(bus, CLK_AVAIL, false); - /* Leave the device in state where it is 'quiet'. This - * is done by putting it in download_state which - * essentially resets all necessary cores - */ - msleep(20); - brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci); - brcmf_sdio_clkctl(bus, CLK_NONE, false); - sdio_release_host(bus->sdiodev->func[1]); + if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + /* Leave the device in state where it is + * 'quiet'. This is done by putting it in + * download_state which essentially resets + * all necessary cores. + */ + msleep(20); + brcmf_sdio_chip_enter_download(bus->sdiodev, + bus->ci); + brcmf_sdio_clkctl(bus, CLK_NONE, false); + sdio_release_host(bus->sdiodev->func[1]); + } brcmf_sdio_chip_detach(&bus->ci); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index c345c32eb631..24f65cd53859 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -522,10 +522,10 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state) /* update state of upper layer */ if (state == BRCMFMAC_USB_STATE_DOWN) { brcmf_dbg(USB, "DBUS is down\n"); - bcmf_bus->state = BRCMF_BUS_DOWN; + brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN); } else if (state == BRCMFMAC_USB_STATE_UP) { brcmf_dbg(USB, "DBUS is up\n"); - bcmf_bus->state = BRCMF_BUS_DATA; + brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DATA); } else { brcmf_dbg(USB, "DBUS current state=%d\n", state); } |