diff options
| -rw-r--r-- | Documentation/hwmon/aquacomputer_d5next.rst | 17 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/hwmon/aquacomputer_d5next.c | 69 |
3 files changed, 78 insertions, 14 deletions
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 717e28226cde..33649a1e3a05 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -9,6 +9,7 @@ Supported devices: * Aquacomputer Farbwerk RGB controller * Aquacomputer Farbwerk 360 RGB controller * Aquacomputer Octo fan controller +* Aquacomputer Quadro fan controller Author: Aleksa Savic @@ -33,6 +34,9 @@ better suited for userspace tools. The Octo exposes four temperature sensors and eight PWM controllable fans, along with their speed (in RPM), power, voltage and current. +The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable +fans, along with their speed (in RPM), power, voltage and current. + The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device, not all sysfs and debugfs entries will be available. @@ -45,13 +49,14 @@ the kernel and supports hotswapping. Sysfs entries ------------- -================ ============================================= +================ ============================================== temp[1-4]_input Temperature sensors (in millidegrees Celsius) -fan[1-2]_input Pump/fan speed (in RPM) -power[1-2]_input Pump/fan power (in micro Watts) -in[0-2]_input Pump/fan voltage (in milli Volts) -curr[1-2]_input Pump/fan current (in milli Amperes) -================ ============================================= +fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) +power[1-8]_input Pump/fan power (in micro Watts) +in[0-7]_input Pump/fan voltage (in milli Volts) +curr[1-8]_input Pump/fan current (in milli Amperes) +pwm[1-8] Fan PWM (0 - 255) +================ ============================================== Debugfs entries --------------- diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index fd2446cf343b..e70d9614bec2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -257,13 +257,13 @@ config SENSORS_AHT10 will be called aht10. config SENSORS_AQUACOMPUTER_D5NEXT - tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360" + tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, and Farbwerk 360" depends on USB_HID select CRC16 help If you say yes here you get support for sensors and fans of - the Aquacomputer D5 Next watercooling pump, Octo fan - controller, Farbwerk and Farbwerk 360 RGB controllers, where + the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan + controllers, Farbwerk and Farbwerk 360 RGB controllers, where available. This driver can also be built as a module. If so, the module diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index 738a1df8eae6..66430553cc45 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo) + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo, + * Quadro) * * Aquacomputer devices send HID reports (with ID 0x01) every second to report * sensor values. @@ -21,17 +22,19 @@ #define USB_VENDOR_ID_AQUACOMPUTER 0x0c70 #define USB_PRODUCT_ID_FARBWERK 0xf00a +#define USB_PRODUCT_ID_QUADRO 0xf00d #define USB_PRODUCT_ID_D5NEXT 0xf00e #define USB_PRODUCT_ID_FARBWERK360 0xf010 #define USB_PRODUCT_ID_OCTO 0xf011 -enum kinds { d5next, farbwerk, farbwerk360, octo }; +enum kinds { d5next, farbwerk, farbwerk360, octo, quadro }; static const char *const aqc_device_names[] = { [d5next] = "d5next", [farbwerk] = "farbwerk", [farbwerk360] = "farbwerk360", - [octo] = "octo" + [octo] = "octo", + [quadro] = "quadro" }; #define DRIVER_NAME "aquacomputer_d5next" @@ -97,6 +100,18 @@ static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB /* Fan speed registers in Octo control report (from 0-100%) */ static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE }; +/* Register offsets for the Quadro fan controller */ +#define QUADRO_POWER_CYCLES 0x18 +#define QUADRO_NUM_FANS 4 +#define QUADRO_NUM_SENSORS 4 +#define QUADRO_SENSOR_START 0x34 +#define QUADRO_CTRL_REPORT_SIZE 0x3c1 +#define QUADRO_FLOW_SENSOR_OFFSET 0x6e +static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 }; + +/* Fan speed registers in Quadro control report (from 0-100%) */ +static u16 quadro_ctrl_fan_offsets[] = { 0x36, 0x8b, 0xe0, 0x135 }; + /* Labels for D5 Next */ static const char *const label_d5next_temp[] = { "Coolant temp" @@ -124,7 +139,7 @@ static const char *const label_d5next_current[] = { "Fan current" }; -/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */ +/* Labels for Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */ static const char *const label_temp_sensors[] = { "Sensor 1", "Sensor 2", @@ -132,7 +147,7 @@ static const char *const label_temp_sensors[] = { "Sensor 4" }; -/* Labels for Octo */ +/* Labels for Octo and Quadro (except speed) */ static const char *const label_fan_speed[] = { "Fan 1 speed", "Fan 2 speed", @@ -177,6 +192,15 @@ static const char *const label_fan_current[] = { "Fan 8 current" }; +/* Labels for Quadro fan speeds */ +static const char *const label_quadro_speeds[] = { + "Fan 1 speed", + "Fan 2 speed", + "Fan 3 speed", + "Fan 4 speed", + "Flow speed [dL/h]" +}; + struct aqc_data { struct hid_device *hdev; struct device *hwmon_dev; @@ -197,6 +221,7 @@ struct aqc_data { int num_temp_sensors; int temp_sensor_start_offset; u16 power_cycle_count_offset; + u8 flow_sensor_offset; /* General info, same across all devices */ u32 serial_number[2]; @@ -334,6 +359,18 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3 } break; case hwmon_fan: + switch (priv->kind) { + case quadro: + /* Special case to support flow sensor */ + if (channel < priv->num_fans + 1) + return 0444; + break; + default: + if (channel < priv->num_fans) + return 0444; + break; + } + break; case hwmon_power: case hwmon_curr: if (channel < priv->num_fans) @@ -578,6 +615,9 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10; priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10; break; + case quadro: + priv->speed_input[4] = get_unaligned_be16(data + priv->flow_sensor_offset); + break; default: break; } @@ -719,6 +759,24 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->voltage_label = label_fan_voltage; priv->current_label = label_fan_current; break; + case USB_PRODUCT_ID_QUADRO: + priv->kind = quadro; + + priv->num_fans = QUADRO_NUM_FANS; + priv->fan_sensor_offsets = quadro_sensor_fan_offsets; + priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets; + priv->num_temp_sensors = QUADRO_NUM_SENSORS; + priv->temp_sensor_start_offset = QUADRO_SENSOR_START; + priv->power_cycle_count_offset = QUADRO_POWER_CYCLES; + priv->buffer_size = QUADRO_CTRL_REPORT_SIZE; + priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET; + + priv->temp_label = label_temp_sensors; + priv->speed_label = label_quadro_speeds; + priv->power_label = label_fan_power; + priv->voltage_label = label_fan_voltage; + priv->current_label = label_fan_current; + break; default: break; } @@ -774,6 +832,7 @@ static const struct hid_device_id aqc_table[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) }, { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) }, { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) }, { } }; |