diff options
| -rw-r--r-- | drivers/clk/samsung/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/samsung/clk-exynos-arm64.c | 94 | ||||
| -rw-r--r-- | drivers/clk/samsung/clk-exynos-arm64.h | 20 | ||||
| -rw-r--r-- | drivers/clk/samsung/clk-exynos850.c | 88 |
4 files changed, 119 insertions, 84 deletions
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index c46cf11e4d0b..901e6333c5f0 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_EXYNOS_5420_COMMON_CLK) += clk-exynos5-subcmu.o obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o obj-$(CONFIG_EXYNOS_CLKOUT) += clk-exynos-clkout.o +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos-arm64.o obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos850.o obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o diff --git a/drivers/clk/samsung/clk-exynos-arm64.c b/drivers/clk/samsung/clk-exynos-arm64.c new file mode 100644 index 000000000000..b921b9a1134a --- /dev/null +++ b/drivers/clk/samsung/clk-exynos-arm64.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2021 Linaro Ltd. + * Copyright (C) 2021 Dávid Virág <virag.david003@gmail.com> + * Author: Sam Protsenko <semen.protsenko@linaro.org> + * Author: Dávid Virág <virag.david003@gmail.com> + * + * This file contains shared functions used by some arm64 Exynos SoCs, + * such as Exynos7885 or Exynos850 to register and init CMUs. + */ +#include <linux/clk.h> +#include <linux/of_address.h> + +#include "clk-exynos-arm64.h" + +/* Gate register bits */ +#define GATE_MANUAL BIT(20) +#define GATE_ENABLE_HWACG BIT(28) + +/* Gate register offsets range */ +#define GATE_OFF_START 0x2000 +#define GATE_OFF_END 0x2fff + +/** + * exynos_arm64_init_clocks - Set clocks initial configuration + * @np: CMU device tree node with "reg" property (CMU addr) + * @reg_offs: Register offsets array for clocks to init + * @reg_offs_len: Number of register offsets in reg_offs array + * + * Set manual control mode for all gate clocks. + */ +static void __init exynos_arm64_init_clocks(struct device_node *np, + const unsigned long *reg_offs, size_t reg_offs_len) +{ + void __iomem *reg_base; + size_t i; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + for (i = 0; i < reg_offs_len; ++i) { + void __iomem *reg = reg_base + reg_offs[i]; + u32 val; + + /* Modify only gate clock registers */ + if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END) + continue; + + val = readl(reg); + val |= GATE_MANUAL; + val &= ~GATE_ENABLE_HWACG; + writel(val, reg); + } + + iounmap(reg_base); +} + +/** + * exynos_arm64_register_cmu - Register specified Exynos CMU domain + * @dev: Device object; may be NULL if this function is not being + * called from platform driver probe function + * @np: CMU device tree node + * @cmu: CMU data + * + * Register specified CMU domain, which includes next steps: + * + * 1. Enable parent clock of @cmu CMU + * 2. Set initial registers configuration for @cmu CMU clocks + * 3. Register @cmu CMU clocks using Samsung clock framework API + */ +void __init exynos_arm64_register_cmu(struct device *dev, + struct device_node *np, const struct samsung_cmu_info *cmu) +{ + /* Keep CMU parent clock running (needed for CMU registers access) */ + if (cmu->clk_name) { + struct clk *parent_clk; + + if (dev) + parent_clk = clk_get(dev, cmu->clk_name); + else + parent_clk = of_clk_get_by_name(np, cmu->clk_name); + + if (IS_ERR(parent_clk)) { + pr_err("%s: could not find bus clock %s; err = %ld\n", + __func__, cmu->clk_name, PTR_ERR(parent_clk)); + } else { + clk_prepare_enable(parent_clk); + } + } + + exynos_arm64_init_clocks(np, cmu->clk_regs, cmu->nr_clk_regs); + samsung_cmu_register_one(np, cmu); +} diff --git a/drivers/clk/samsung/clk-exynos-arm64.h b/drivers/clk/samsung/clk-exynos-arm64.h new file mode 100644 index 000000000000..0dd174693935 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos-arm64.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Linaro Ltd. + * Copyright (C) 2021 Dávid Virág <virag.david003@gmail.com> + * Author: Sam Protsenko <semen.protsenko@linaro.org> + * Author: Dávid Virág <virag.david003@gmail.com> + * + * This file contains shared functions used by some arm64 Exynos SoCs, + * such as Exynos7885 or Exynos850 to register and init CMUs. + */ + +#ifndef __CLK_EXYNOS_ARM64_H +#define __CLK_EXYNOS_ARM64_H + +#include "clk.h" + +void exynos_arm64_register_cmu(struct device *dev, + struct device_node *np, const struct samsung_cmu_info *cmu); + +#endif /* __CLK_EXYNOS_ARM64_H */ diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c index 4799771d09bc..cd9725f1dbf7 100644 --- a/drivers/clk/samsung/clk-exynos850.c +++ b/drivers/clk/samsung/clk-exynos850.c @@ -9,93 +9,13 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/of.h> -#include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <dt-bindings/clock/exynos850.h> #include "clk.h" - -/* Gate register bits */ -#define GATE_MANUAL BIT(20) -#define GATE_ENABLE_HWACG BIT(28) - -/* Gate register offsets range */ -#define GATE_OFF_START 0x2000 -#define GATE_OFF_END 0x2fff - -/** - * exynos850_init_clocks - Set clocks initial configuration - * @np: CMU device tree node with "reg" property (CMU addr) - * @reg_offs: Register offsets array for clocks to init - * @reg_offs_len: Number of register offsets in reg_offs array - * - * Set manual control mode for all gate clocks. - */ -static void __init exynos850_init_clocks(struct device_node *np, - const unsigned long *reg_offs, size_t reg_offs_len) -{ - void __iomem *reg_base; - size_t i; - - reg_base = of_iomap(np, 0); - if (!reg_base) - panic("%s: failed to map registers\n", __func__); - - for (i = 0; i < reg_offs_len; ++i) { - void __iomem *reg = reg_base + reg_offs[i]; - u32 val; - - /* Modify only gate clock registers */ - if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END) - continue; - - val = readl(reg); - val |= GATE_MANUAL; - val &= ~GATE_ENABLE_HWACG; - writel(val, reg); - } - - iounmap(reg_base); -} - -/** - * exynos850_register_cmu - Register specified Exynos850 CMU domain - * @dev: Device object; may be NULL if this function is not being - * called from platform driver probe function - * @np: CMU device tree node - * @cmu: CMU data - * - * Register specified CMU domain, which includes next steps: - * - * 1. Enable parent clock of @cmu CMU - * 2. Set initial registers configuration for @cmu CMU clocks - * 3. Register @cmu CMU clocks using Samsung clock framework API - */ -static void __init exynos850_register_cmu(struct device *dev, - struct device_node *np, const struct samsung_cmu_info *cmu) -{ - /* Keep CMU parent clock running (needed for CMU registers access) */ - if (cmu->clk_name) { - struct clk *parent_clk; - - if (dev) - parent_clk = clk_get(dev, cmu->clk_name); - else - parent_clk = of_clk_get_by_name(np, cmu->clk_name); - - if (IS_ERR(parent_clk)) { - pr_err("%s: could not find bus clock %s; err = %ld\n", - __func__, cmu->clk_name, PTR_ERR(parent_clk)); - } else { - clk_prepare_enable(parent_clk); - } - } - - exynos850_init_clocks(np, cmu->clk_regs, cmu->nr_clk_regs); - samsung_cmu_register_one(np, cmu); -} +#include "clk-exynos-arm64.h" /* ---- CMU_TOP ------------------------------------------------------------- */ @@ -404,7 +324,7 @@ static const struct samsung_cmu_info top_cmu_info __initconst = { static void __init exynos850_cmu_top_init(struct device_node *np) { - exynos850_register_cmu(NULL, np, &top_cmu_info); + exynos_arm64_register_cmu(NULL, np, &top_cmu_info); } /* Register CMU_TOP early, as it's a dependency for other early domains */ @@ -911,7 +831,7 @@ static const struct samsung_cmu_info peri_cmu_info __initconst = { static void __init exynos850_cmu_peri_init(struct device_node *np) { - exynos850_register_cmu(NULL, np, &peri_cmu_info); + exynos_arm64_register_cmu(NULL, np, &peri_cmu_info); } /* Register CMU_PERI early, as it's needed for MCT timer */ @@ -1098,7 +1018,7 @@ static int __init exynos850_cmu_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; info = of_device_get_match_data(dev); - exynos850_register_cmu(dev, dev->of_node, info); + exynos_arm64_register_cmu(dev, dev->of_node, info); return 0; } |