diff options
| -rw-r--r-- | sound/soc/codecs/Kconfig | 4 | ||||
| -rw-r--r-- | sound/soc/codecs/Makefile | 2 | ||||
| -rw-r--r-- | sound/soc/codecs/tlv320aic26.c | 519 | ||||
| -rw-r--r-- | sound/soc/codecs/tlv320aic26.h | 93 |
4 files changed, 618 insertions, 0 deletions
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 1db04a28a53d..9e09fa5f2d45 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -47,6 +47,10 @@ config SND_SOC_CS4270_VD33_ERRATA bool depends on SND_SOC_CS4270 +config SND_SOC_TLV320AIC26 + tristate "TI TLV320AIC26 Codec support" + depends on SND_SOC && SPI + config SND_SOC_TLV320AIC3X tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d7b97abcf729..dc0357e20fea 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -9,6 +9,7 @@ snd-soc-wm8990-objs := wm8990.o snd-soc-wm9712-objs := wm9712.o snd-soc-wm9713-objs := wm9713.o snd-soc-cs4270-objs := cs4270.o +snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o @@ -22,4 +23,5 @@ obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o +obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c new file mode 100644 index 000000000000..4621fda5705e --- /dev/null +++ b/sound/soc/codecs/tlv320aic26.c @@ -0,0 +1,519 @@ +/* + * Texas Instruments TLV320AIC26 low power audio CODEC + * ALSA SoC CODEC driver + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/soc-of-simple.h> +#include <sound/initval.h> + +#include "tlv320aic26.h" + +MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver"); +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); +MODULE_LICENSE("GPL"); + +/* AIC26 driver private data */ +struct aic26 { + struct spi_device *spi; + struct snd_soc_codec codec; + u16 reg_cache[AIC26_NUM_REGS]; /* shadow registers */ + int master; + int datfm; + int mclk; + + /* Keyclick parameters */ + int keyclick_amplitude; + int keyclick_freq; + int keyclick_len; +}; + +/* --------------------------------------------------------------------- + * Register access routines + */ +static unsigned int aic26_reg_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + struct aic26 *aic26 = codec->private_data; + u16 *cache = codec->reg_cache; + u16 cmd, value; + u8 buffer[2]; + int rc; + + if (reg >= AIC26_NUM_REGS) { + WARN_ON_ONCE(1); + return 0; + } + + /* Do SPI transfer; first 16bits are command; remaining is + * register contents */ + cmd = AIC26_READ_COMMAND_WORD(reg); + buffer[0] = (cmd >> 8) & 0xff; + buffer[1] = cmd & 0xff; + rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2); + if (rc) { + dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); + return -EIO; + } + value = (buffer[0] << 8) | buffer[1]; + + /* Update the cache before returning with the value */ + cache[reg] = value; + return value; +} + +static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + if (reg >= AIC26_NUM_REGS) { + WARN_ON_ONCE(1); + return 0; + } + + return cache[reg]; +} + +static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + struct aic26 *aic26 = codec->private_data; + u16 *cache = codec->reg_cache; + u16 cmd; + u8 buffer[4]; + int rc; + + if (reg >= AIC26_NUM_REGS) { + WARN_ON_ONCE(1); + return -EINVAL; + } + + /* Do SPI transfer; first 16bits are command; remaining is data + * to write into register */ + cmd = AIC26_WRITE_COMMAND_WORD(reg); + buffer[0] = (cmd >> 8) & 0xff; + buffer[1] = cmd & 0xff; + buffer[2] = value >> 8; + buffer[3] = value; + rc = spi_write(aic26->spi, buffer, 4); + if (rc) { + dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); + return -EIO; + } + + /* update cache before returning */ + cache[reg] = value; + return 0; +} + +/* --------------------------------------------------------------------- + * Digital Audio Interface Operations + */ +static int aic26_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct aic26 *aic26 = codec->private_data; + int fsref, divisor, wlen, pval, jval, dval, qval; + u16 reg; + + dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n", + substream, params); + dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params), + params_format(params)); + + switch (params_rate(params)) { + case 8000: fsref = 48000; divisor = AIC26_DIV_6; break; + case 11025: fsref = 44100; divisor = AIC26_DIV_4; break; + case 12000: fsref = 48000; divisor = AIC26_DIV_4; break; + case 16000: fsref = 48000; divisor = AIC26_DIV_3; break; + case 22050: fsref = 44100; divisor = AIC26_DIV_2; break; + case 24000: fsref = 48000; divisor = AIC26_DIV_2; break; + case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break; + case 44100: fsref = 44100; divisor = AIC26_DIV_1; break; + case 48000: fsref = 48000; divisor = AIC26_DIV_1; break; + default: + dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL; + } + + /* select data word length */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break; + case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break; + case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break; + case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break; + default: + dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; + } + + /* Configure PLL */ + pval = 1; + jval = (fsref == 44100) ? 7 : 8; + dval = (fsref == 44100) ? 5264 : 1920; + qval = 0; + reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; + aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg); + reg = dval << 2; + aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg); + + /* Audio Control 3 (master mode, fsref rate) */ + reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3); + reg &= ~0xf800; + if (aic26->master) + reg |= 0x0800; + if (fsref == 48000) + reg |= 0x2000; + aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg); + + /* Audio Control 1 (FSref divisor) */ + reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1); + reg &= ~0x0fff; + reg |= wlen | aic26->datfm | (divisor << 3) | divisor; + aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg); + + return 0; +} + +/** + * aic26_mute - Mute control to reduce noise when changing audio format + */ +static int aic26_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct aic26 *aic26 = codec->private_data; + u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN); + + dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n", + dai, mute); + + if (mute) + reg |= 0x8080; + else + reg &= ~0x8080; + aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg); + + return 0; +} + +static int aic26_set_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct aic26 *aic26 = codec->private_data; + + dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i," + " freq=%i, dir=%i)\n", + codec_dai, clk_id, freq, dir); + + /* MCLK needs to fall between 2MHz and 50 MHz */ + if ((freq < 2000000) || (freq > 50000000)) + return -EINVAL; + + aic26->mclk = freq; + return 0; +} + +static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct aic26 *aic26 = codec->private_data; + + dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n", + codec_dai, fmt); + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break; + case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break; + default: + dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break; + case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break; + case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break; + case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break; + default: + dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; + } + + return 0; +} + +/* --------------------------------------------------------------------- + * Digital Audio Interface Definition + */ +#define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000) +#define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\ + SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) + +struct snd_soc_dai aic26_dai = { + .name = "tlv320aic26", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = AIC26_RATES, + .formats = AIC26_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = AIC26_RATES, + .formats = AIC26_FORMATS, + }, + .ops = { + .hw_params = aic26_hw_params, + }, + .dai_ops = { + .digital_mute = aic26_mute, + .set_sysclk = aic26_set_sysclk, + .set_fmt = aic26_set_fmt, + }, +}; +EXPORT_SYMBOL_GPL(aic26_dai); + +/* --------------------------------------------------------------------- + * ALSA controls + */ +static const char *aic26_capture_src_text[] = {"Mic", "Aux"}; +static const struct soc_enum aic26_capture_src_enum = + SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text); + +static const struct snd_kcontrol_new aic26_snd_controls[] = { + /* Output */ + SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1), + SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1), + SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0), + SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1), + SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0), + SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0), + SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0), + SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0), + SOC_ENUM("Capture Source", aic26_capture_src_enum), +}; + +/* --------------------------------------------------------------------- + * SoC CODEC portion of driver: probe and release routines + */ +static int aic26_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + struct snd_kcontrol *kcontrol; + struct aic26 *aic26; + int i, ret, err; + + dev_info(&pdev->dev, "Probing AIC26 SoC CODEC driver\n"); + dev_dbg(&pdev->dev, "socdev=%p\n", socdev); + dev_dbg(&pdev->dev, "codec_data=%p\n", socdev->codec_data); + + /* Fetch the relevant aic26 private data here (it's already been + * stored in the .codec pointer) */ + aic26 = socdev->codec_data; + if (aic26 == NULL) { + dev_err(&pdev->dev, "aic26: missing codec pointer\n"); + return -ENODEV; + } + codec = &aic26->codec; + socdev->codec = codec; + + dev_dbg(&pdev->dev, "Registering PCMs, dev=%p, socdev->dev=%p\n", + &pdev->dev, socdev->dev); + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(&pdev->dev, "aic26: failed to create pcms\n"); + return -ENODEV; + } + + /* register controls */ + dev_dbg(&pdev->dev, "Registering controls\n"); + for (i = 0; i < ARRAY_SIZE(aic26_snd_controls); i++) { + kcontrol = snd_soc_cnew(&aic26_snd_controls[i], codec, NULL); + err = snd_ctl_add(codec->card, kcontrol); + WARN_ON(err < 0); + } + + /* CODEC is setup, we can register the card now */ + dev_dbg(&pdev->dev, "Registering card\n"); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + dev_err(&pdev->dev, "aic26: failed to register card\n"); + goto card_err; + } + return 0; + + card_err: + snd_soc_free_pcms(socdev); + return ret; +} + +static int aic26_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + snd_soc_free_pcms(socdev); + return 0; +} + +struct snd_soc_codec_device aic26_soc_codec_dev = { + .probe = aic26_probe, + .remove = aic26_remove, +}; + +/* --------------------------------------------------------------------- + * SPI device portion of driver: sysfs files for debugging + */ + +static ssize_t aic26_keyclick_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aic26 *aic26 = dev_get_drvdata(dev); + int val, amp, freq, len; + + val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); + amp = (val >> 12) & 0x7; + freq = (125 << ((val >> 8) & 0x7)) >> 1; + len = 2 * (1 + ((val >> 4) & 0xf)); + + return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len); +} + +/* Any write to the keyclick attribute will trigger the keyclick event */ +static ssize_t aic26_keyclick_set(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aic26 *aic26 = dev_get_drvdata(dev); + int val; + + val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); + val |= 0x8000; + aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val); + + return count; +} + +DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set); + +/* --------------------------------------------------------------------- + * SPI device portion of driver: probe and release routines and SPI + * driver registration. + */ +static int aic26_spi_probe(struct spi_device *spi) +{ + struct aic26 *aic26; + int rc, i, reg; + + dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n"); + + /* Allocate driver data */ + aic26 = kzalloc(sizeof *aic26, GFP_KERNEL); + if (!aic26) + return -ENOMEM; + + /* Initialize the driver data */ + aic26->spi = spi; + dev_set_drvdata(&spi->dev, aic26); + + /* Setup what we can in the codec structure so that the register + * access functions will work as expected. More will be filled + * out when it is probed by the SoC CODEC part of this driver */ + aic26->codec.private_data = aic26; + aic26->codec.name = "aic26"; + aic26->codec.owner = THIS_MODULE; + aic26->codec.dai = &aic26_dai; + aic26->codec.num_dai = 1; + aic26->codec.read = aic26_reg_read; + aic26->codec.write = aic26_reg_write; + aic26->master = 1; + mutex_init(&aic26->codec.mutex); + INIT_LIST_HEAD(&aic26->codec.dapm_widgets); + INIT_LIST_HEAD(&aic26->codec.dapm_paths); + aic26->codec.reg_cache_size = AIC26_NUM_REGS; + aic26->codec.reg_cache = aic26->reg_cache; + + /* Reset the codec to power on defaults */ + aic26_reg_write(&aic26->codec, AIC26_REG_RESET, 0xBB00); + + /* Power up CODEC */ + aic26_reg_write(&aic26->codec, AIC26_REG_POWER_CTRL, 0); + + /* Audio Control 3 (master mode, fsref rate) */ + reg = aic26_reg_read(&aic26->codec, AIC26_REG_AUDIO_CTRL3); + reg &= ~0xf800; + reg |= 0x0800; /* set master mode */ + aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL3, reg); + + /* Fill register cache */ + for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++) + aic26_reg_read(&aic26->codec, i); + + /* Register the sysfs files for debugging */ + /* Create SysFS files */ + rc = device_create_file(&spi->dev, &dev_attr_keyclick); + if (rc) + dev_info(&spi->dev, "error creating sysfs files\n"); + +#if defined(CONFIG_SND_SOC_OF_SIMPLE) + /* Tell the of_soc helper about this codec */ + of_snd_soc_register_codec(&aic26_soc_codec_dev, aic26, &aic26_dai, + spi->dev.archdata.of_node); +#endif + + dev_dbg(&spi->dev, "SPI device initialized\n"); + return 0; +} + +static int aic26_spi_remove(struct spi_device *spi) +{ + struct aic26 *aic26 = dev_get_drvdata(&spi->dev); + + kfree(aic26); + + return 0; +} + +static struct spi_driver aic26_spi = { + .driver = { + .name = "tlv320aic26", + .owner = THIS_MODULE, + }, + .probe = aic26_spi_probe, + .remove = aic26_spi_remove, +}; + +static int __init aic26_init(void) +{ + return spi_register_driver(&aic26_spi); +} +module_init(aic26_init); + +static void __exit aic26_exit(void) +{ + spi_unregister_driver(&aic26_spi); +} +module_exit(aic26_exit); diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h new file mode 100644 index 000000000000..62b1f2261429 --- /dev/null +++ b/sound/soc/codecs/tlv320aic26.h @@ -0,0 +1,93 @@ +/* + * Texas Instruments TLV320AIC26 low power audio CODEC + * register definitions + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + */ + +#ifndef _TLV320AIC16_H_ +#define _TLV320AIC16_H_ + +/* AIC26 Registers */ +#define AIC26_READ_COMMAND_WORD(addr) ((1 << 15) | (addr << 5)) +#define AIC26_WRITE_COMMAND_WORD(addr) ((0 << 15) | (addr << 5)) +#define AIC26_PAGE_ADDR(page, offset) ((page << 6) | offset) +#define AIC26_NUM_REGS AIC26_PAGE_ADDR(3, 0) + +/* Page 0: Auxillary data registers */ +#define AIC26_REG_BAT1 AIC26_PAGE_ADDR(0, 0x05) +#define AIC26_REG_BAT2 AIC26_PAGE_ADDR(0, 0x06) +#define AIC26_REG_AUX AIC26_PAGE_ADDR(0, 0x07) +#define AIC26_REG_TEMP1 AIC26_PAGE_ADDR(0, 0x09) +#define AIC26_REG_TEMP2 AIC26_PAGE_ADDR(0, 0x0A) + +/* Page 1: Auxillary control registers */ +#define AIC26_REG_AUX_ADC AIC26_PAGE_ADDR(1, 0x00) +#define AIC26_REG_STATUS AIC26_PAGE_ADDR(1, 0x01) +#define AIC26_REG_REFERENCE AIC26_PAGE_ADDR(1, 0x03) +#define AIC26_REG_RESET AIC26_PAGE_ADDR(1, 0x04) + +/* Page 2: Audio control registers */ +#define AIC26_REG_AUDIO_CTRL1 AIC26_PAGE_ADDR(2, 0x00) +#define AIC26_REG_ADC_GAIN AIC26_PAGE_ADDR(2, 0x01) +#define AIC26_REG_DAC_GAIN AIC26_PAGE_ADDR(2, 0x02) +#define AIC26_REG_SIDETONE AIC26_PAGE_ADDR(2, 0x03) +#define AIC26_REG_AUDIO_CTRL2 AIC26_PAGE_ADDR(2, 0x04) +#define AIC26_REG_POWER_CTRL AIC26_PAGE_ADDR(2, 0x05) +#define AIC26_REG_AUDIO_CTRL3 AIC26_PAGE_ADDR(2, 0x06) + +#define AIC26_REG_FILTER_COEFF_L_N0 AIC26_PAGE_ADDR(2, 0x07) +#define AIC26_REG_FILTER_COEFF_L_N1 AIC26_PAGE_ADDR(2, 0x08) +#define AIC26_REG_FILTER_COEFF_L_N2 AIC26_PAGE_ADDR(2, 0x09) +#define AIC26_REG_FILTER_COEFF_L_N3 AIC26_PAGE_ADDR(2, 0x0A) +#define AIC26_REG_FILTER_COEFF_L_N4 AIC26_PAGE_ADDR(2, 0x0B) +#define AIC26_REG_FILTER_COEFF_L_N5 AIC26_PAGE_ADDR(2, 0x0C) +#define AIC26_REG_FILTER_COEFF_L_D1 AIC26_PAGE_ADDR(2, 0x0D) +#define AIC26_REG_FILTER_COEFF_L_D2 AIC26_PAGE_ADDR(2, 0x0E) +#define AIC26_REG_FILTER_COEFF_L_D4 AIC26_PAGE_ADDR(2, 0x0F) +#define AIC26_REG_FILTER_COEFF_L_D5 AIC26_PAGE_ADDR(2, 0x10) +#define AIC26_REG_FILTER_COEFF_R_N0 AIC26_PAGE_ADDR(2, 0x11) +#define AIC26_REG_FILTER_COEFF_R_N1 AIC26_PAGE_ADDR(2, 0x12) +#define AIC26_REG_FILTER_COEFF_R_N2 AIC26_PAGE_ADDR(2, 0x13) +#define AIC26_REG_FILTER_COEFF_R_N3 AIC26_PAGE_ADDR(2, 0x14) +#define AIC26_REG_FILTER_COEFF_R_N4 AIC26_PAGE_ADDR(2, 0x15) +#define AIC26_REG_FILTER_COEFF_R_N5 AIC26_PAGE_ADDR(2, 0x16) +#define AIC26_REG_FILTER_COEFF_R_D1 AIC26_PAGE_ADDR(2, 0x17) +#define AIC26_REG_FILTER_COEFF_R_D2 AIC26_PAGE_ADDR(2, 0x18) +#define AIC26_REG_FILTER_COEFF_R_D4 AIC26_PAGE_ADDR(2, 0x19) +#define AIC26_REG_FILTER_COEFF_R_D5 AIC26_PAGE_ADDR(2, 0x1A) + +#define AIC26_REG_PLL_PROG1 AIC26_PAGE_ADDR(2, 0x1B) +#define AIC26_REG_PLL_PROG2 AIC26_PAGE_ADDR(2, 0x1C) +#define AIC26_REG_AUDIO_CTRL4 AIC26_PAGE_ADDR(2, 0x1D) +#define AIC26_REG_AUDIO_CTRL5 AIC26_PAGE_ADDR(2, 0x1E) + +/* fsref dividers; used in register 'Audio Control 1' */ +enum aic26_divisors { + AIC26_DIV_1 = 0, + AIC26_DIV_1_5 = 1, + AIC26_DIV_2 = 2, + AIC26_DIV_3 = 3, + AIC26_DIV_4 = 4, + AIC26_DIV_5 = 5, + AIC26_DIV_5_5 = 6, + AIC26_DIV_6 = 7, +}; + +/* Digital data format */ +enum aic26_datfm { + AIC26_DATFM_I2S = 0 << 8, + AIC26_DATFM_DSP = 1 << 8, + AIC26_DATFM_RIGHTJ = 2 << 8, /* right justified */ + AIC26_DATFM_LEFTJ = 3 << 8, /* left justified */ +}; + +/* Sample word length in bits; used in register 'Audio Control 1' */ +enum aic26_wlen { + AIC26_WLEN_16 = 0 << 10, + AIC26_WLEN_20 = 1 << 10, + AIC26_WLEN_24 = 2 << 10, + AIC26_WLEN_32 = 3 << 10, +}; + +#endif /* _TLV320AIC16_H_ */ |