diff options
75 files changed, 436 insertions, 223 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 548892c08c59..7da578d72123 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -7,7 +7,7 @@ as "armctrl" in the SoC documentation, hence naming of this binding. Required properties: -- compatible : should be "brcm,bcm2835-armctrl-ic.txt" +- compatible : should be "brcm,bcm2835-armctrl-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt index 2de21c2acf55..844bd5fbd04c 100644 --- a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt @@ -7,7 +7,7 @@ free running counter values, and generates an interrupt. Required properties: -- compatible : should be "brcm,bcm2835-system-timer.txt" +- compatible : should be "brcm,bcm2835-system-timer" - reg : Specifies base physical address and size of the registers. - interrupts : A list of 4 interrupt sinks; one per timer channel. - clock-frequency : The frequency of the clock that drives the counter, in Hz. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e40eefb5d32d..767aae8277fa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -494,7 +494,6 @@ config ARCH_IOP32X depends on MMU select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -508,7 +507,6 @@ config ARCH_IOP33X depends on MMU select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -1772,6 +1770,7 @@ source "mm/Kconfig" config FORCE_MAX_ZONEORDER int "Maximum zone order" if ARCH_SHMOBILE range 11 64 if ARCH_SHMOBILE + default "12" if SOC_AM33XX default "9" if SA1111 default "11" help diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 29f541f0e653..c1ce813fcc4a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,14 +25,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb -dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \ - imx53-ard.dtb \ - imx53-evk.dtb \ - imx53-qsb.dtb \ - imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ @@ -76,7 +68,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap4-pandaES.dtb \ omap4-var_som.dtb \ omap4-sdp.dtb \ - omap5-evm.dtb + omap5-evm.dtb \ + am335x-evm.dtb \ + am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ @@ -104,5 +98,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca15-tc1.dtb \ vexpress-v2p-ca15_a7.dtb \ xenvm-4.2.dtb +dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ + wm8505-ref.dtb \ + wm8650-mid.dtb endif diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 20b966ee1bb3..e8f927cbb376 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -59,6 +59,41 @@ }; }; +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -137,3 +172,15 @@ cs1-used; device-handle = <&elpida_ECB240ABACN>; }; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 94a23b39033d..5b7e04fbff50 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -117,6 +117,15 @@ }; &omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + >; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ @@ -141,6 +150,50 @@ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ >; }; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */ + 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */ + 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */ + 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */ + 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */ + 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */ + 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ + >; + }; }; &i2c1 { @@ -349,3 +402,7 @@ pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; + +&mcbsp3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 9c41a3f311aa..c663eba73168 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -27,6 +27,60 @@ }; +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */ + 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */ + 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */ + 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */ + 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */ + 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */ + 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */ + 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */ + 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */ + 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */ + 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */ + 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */ + 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ + >; + }; +}; + &mmc1 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; @@ -82,3 +136,7 @@ 0x020700d9>; /* SEARCH */ linux,input-no-autorepeat; }; + +&mcbsp3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5db33f481a33..42c78beb4fdc 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,23 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + omap5_pmx_core: pinmux@4a002840 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a002840 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap5_pmx_wkup: pinmux@4ae0c840 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4ae0c840 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e60dc7124e92..f0ba901676ac 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -539,7 +539,7 @@ nvidia,invert-interrupt; }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 67a6cd910b96..f3a09d0d45bc 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -170,7 +170,7 @@ reg = <0x7000e400 0x400>; }; - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -183,7 +183,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index c4110d1b1f2d..001f4913799c 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -284,11 +284,17 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { - it8152_io.start = IT8152_IO_BASE + 0x12000; - it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000; + /* + * FIXME: use pci_ioremap_io to remap the IO space here and + * move over to the generic io.h implementation. + * This requires solving the same problem for PXA PCMCIA + * support. + */ + it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000; + it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000; sys->mem_offset = 0x10000000; - sys->io_offset = IT8152_IO_BASE; + sys->io_offset = (unsigned long)IT8152_IO_BASE; if (request_resource(&ioport_resource, &it8152_io)) { printk(KERN_ERR "PCI: unable to allocate IO region\n"); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2c2d86505a54..5315f05896e9 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -153,7 +153,9 @@ static int at91_pm_verify_clocks(void) } } -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS)) + return 1; + /* PCK0..PCK3 must be disabled, or configured to use clk32k */ for (i = 0; i < 4; i++) { u32 css; @@ -167,7 +169,6 @@ static int at91_pm_verify_clocks(void) return 0; } } -#endif return 1; } diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e6f52de1062f..da9881b161e1 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -87,7 +87,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) iotable_init(desc, 1); } -static struct map_desc at91_io_desc __initdata = { +static struct map_desc at91_io_desc __initdata __maybe_unused = { .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 6676dee7104e..e517e1036b09 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -939,7 +939,7 @@ static struct platform_device da850_cpufreq_device = { unsigned int da850_max_speed = 300000; -int __init da850_register_cpufreq(char *async_clk) +int da850_register_cpufreq(char *async_clk) { int i; diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h index 400551e43e4e..61c714c4920e 100644 --- a/arch/arm/mach-footbridge/include/mach/irqs.h +++ b/arch/arm/mach-footbridge/include/mach/irqs.h @@ -89,8 +89,6 @@ #define IRQ_NETWINDER_VGA _ISA_IRQ(11) #define IRQ_NETWINDER_SOUND _ISA_IRQ(12) -#undef RTC_IRQ -#define RTC_IRQ IRQ_ISA_RTC_ALARM #define I8042_KBD_IRQ IRQ_ISA_KEYBOARD #define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) #define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 1a78692e32a4..202e6a57f100 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -3,7 +3,7 @@ */ void cm_control(u32, u32); -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) +#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL) #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 4c0347526851..efeac5d0bc9e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,9 +324,9 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 +#define PCI_MEMORY_VADDR IOMEM(0xe8000000) +#define PCI_CONFIG_VADDR IOMEM(0xec000000) +#define PCI_V3_VADDR IOMEM(0xed000000) /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index d5b5435a09ae..e6617c134faf 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -157,7 +157,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); - vga_base = PCI_MEMORY_VADDR; + vga_base = (unsigned long)PCI_MEMORY_VADDR; pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); } diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 6870a1fbcd78..5b08e8e4cc83 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -261,6 +261,8 @@ static void __init intcp_init_early(void) #endif } +#ifdef CONFIG_OF + static void __init intcp_timer_init_of(void) { struct device_node *node; @@ -297,8 +299,6 @@ static struct sys_timer cp_of_timer = { .init = intcp_timer_init_of, }; -#ifdef CONFIG_OF - static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 060cddde2fd4..e94744111634 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -30,7 +30,7 @@ extern int init_atu; static int __init -iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +iq81340sc_atux_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { WARN_ON(idsel < 1 || idsel > 2); diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 9082b84aeebb..2f28018c4447 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) /* Scan an IOP13XX PCI bus. nr selects which ATU we use. */ -struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys) { int which_atu; struct pci_bus *bus = NULL; diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index f7e1b9bce345..95e731a7ed6a 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -34,7 +34,8 @@ extern struct bus_type platform_bus_type; #define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \ __phys_to_virt(x) : __bus_to_virt(x)); }) #define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \ - (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); }) + (dma_addr_t)__virt_to_phys((unsigned long)x) \ + : (dma_addr_t)__virt_to_bus(x); }) #define __arch_pfn_to_dma(dev, pfn) \ ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ if (!is_lbus_device(dev)) \ diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 343c435b4176..26e9876b50e9 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -54,7 +54,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i /* * Description of the windows needed by the platform code */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { +static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 14, .remappable_wins = 8, .win_cfg_base = win_cfg_base, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 131cd4883f3d..d0cb4857b4b3 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -336,7 +336,7 @@ void __init mv78xx0_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static void mv78xx0_timer_init(void) +static void __init_refok mv78xx0_timer_init(void) { orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 726c02c9c0cd..d3fec92c54cb 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -231,7 +231,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, omap_mmc_add("mmci-omap", i, base, size, irq, rx_req, tx_req, mmc_data[i]); - }; + } } #endif diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a88809a59ea9..5ff28afbefe7 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -830,6 +830,32 @@ static struct omap_board_mux board_mux[] __initdata = { /* NIRQ2 for twl6040 */ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), + /* GPIO_127 for twl6040 */ + OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + /* McPDM */ + OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + /* DMIC */ + OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* McBSP1 */ + OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | + OMAP_PULL_ENA), + OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* McBSP2 */ + OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | + OMAP_PULL_ENA), + OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 0cabe61cd507..e642acf9cad0 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -218,7 +218,7 @@ void __init board_flash_init(struct flash_partitions partition_info[], if (onenandcs > GPMC_CS_NUM) onenandcs = cs; break; - }; + } cs++; } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index a08bebc94ec5..388c431c745a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -461,7 +461,7 @@ static void __init beagle_opp_init(void) mpu_dev = omap_device_get_by_hwmod_name("mpu"); iva_dev = omap_device_get_by_hwmod_name("iva"); - if (!mpu_dev || !iva_dev) { + if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); return; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index a3959de85e05..b9b776b6c954 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -88,11 +88,10 @@ enum { static u8 omap3_evm_version; -u8 get_omap3_evm_rev(void) +static u8 get_omap3_evm_rev(void) { return omap3_evm_version; } -EXPORT_SYMBOL(get_omap3_evm_rev); static void __init omap3_evm_get_revision(void) { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index c7f3d026e6d4..731235eb319e 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -48,11 +48,6 @@ #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/i2c/at24.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 2b012f9d6925..f62b903f3ea1 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -247,8 +247,7 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_panda_wlan_data __initdata = { - /* PANDA ref clock is 38.4 MHz */ - .board_ref_clock = 2, + .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ }; static struct twl6040_codec_data twl6040_codec = { @@ -388,6 +387,21 @@ static struct omap_board_mux board_mux[] __initdata = { /* NIRQ2 for twl6040 */ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), + /* GPIO_127 for twl6040 */ + OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + /* McPDM */ + OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + /* McBSP1 */ + OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | + OMAP_PULL_ENA), + OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ed85fb898c7f..020e03c95bfe 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -748,7 +748,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev = { +static struct platform_device rx51_si4713_dev __initdata_or_module = { .name = "radio-si4713", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 67f8540c8e07..c166fe1fdff9 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -195,8 +195,7 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { - /* ZOOM ref clock is 26 MHz */ - .board_ref_clock = 1, + .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ }; static struct omap2_hsmmc_info mmc[] = { diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index eaed3900a83c..3ff22114d702 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -382,7 +382,7 @@ void omap2_init_clksel_parent(struct clk *clk) __clk_get_name(parent) : "NULL")); clk_reparent(clk, clks->parent); - }; + } found = 1; } } diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index b87b88c2638b..114ab4b8e0e3 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1035,6 +1035,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX), CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX), + CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX), + CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX), CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX), CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 9a7792aec673..70294f54e35a 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -183,17 +183,6 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - _enable_hwsup(clkdm); - return 0; - } - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -217,17 +206,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && - (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { - omap3_clkdm_wakeup(clkdm); - return 0; - } - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -269,6 +247,17 @@ static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && + (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + omap3_clkdm_wakeup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -292,6 +281,17 @@ static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + _enable_hwsup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 7012068ccbf6..a51ece491b91 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -221,7 +221,7 @@ static struct platform_device *create_dss_pdev(const char *pdev_name, ohs[0] = oh; od = omap_device_alloc(pdev, ohs, 1, NULL, 0); - if (!od) { + if (IS_ERR(od)) { pr_err("Could not alloc omap_device for %s\n", pdev_name); r = -ENOMEM; goto err; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8ab1e1bde5e9..5ac5cf30406a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -838,7 +838,7 @@ static int gpmc_setup_irq(void) return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); } -static __exit int gpmc_free_irq(void) +static __devexit int gpmc_free_irq(void) { int i; @@ -944,7 +944,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev) return 0; } -static __exit int gpmc_remove(struct platform_device *pdev) +static __devexit int gpmc_remove(struct platform_device *pdev) { gpmc_free_irq(); gpmc_mem_exit(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 03ebf47cfa9a..4d3a6324155f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -523,7 +523,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); od = omap_device_alloc(pdev, ohs, 1, NULL, 0); - if (!od) { + if (IS_ERR(od)) { pr_err("Could not allocate od for %s\n", name); goto put_pdev; } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 9fe6829f4c16..701e17cba468 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,7 +486,7 @@ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) default: /* Nothing to be done */ break; - }; + } if (val >= 0) { omap_mux_write(pad->partition, val, diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index a004cb9acf52..e089e4d1ae38 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -61,8 +61,8 @@ int __init omap_secure_ram_reserve_memblock(void) { u32 size = OMAP_SECURE_RAM_STORAGE; - size = ALIGN(size, SZ_1M); - omap_secure_memblock_base = arm_memblock_steal(size, SZ_1M); + size = ALIGN(size, SECTION_SIZE); + omap_secure_memblock_base = arm_memblock_steal(size, SECTION_SIZE); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 299ca2821ad1..b969ab1d258b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1698,6 +1698,29 @@ static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh) } /** + * _are_any_hardreset_lines_asserted - return true if any part of @oh is + * hard-reset + * @oh: struct omap_hwmod * + * + * If any hardreset lines associated with @oh are asserted, then + * return true. Otherwise, if no hardreset lines associated with @oh + * are asserted, or if @oh has no hardreset lines, then return false. + * This function is used to avoid executing some parts of the IP block + * enable/disable sequence if any hardreset line is set. + */ +static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) +{ + int rst_cnt = 0; + int i; + + for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++) + if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) + rst_cnt++; + + return (rst_cnt) ? true : false; +} + +/** * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * @@ -1715,7 +1738,7 @@ static int _omap4_disable_module(struct omap_hwmod *oh) * Since integration code might still be doing something, only * disable if all lines are under hardreset. */ - if (!_are_all_hardreset_lines_asserted(oh)) + if (_are_any_hardreset_lines_asserted(oh)) return 0; pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); @@ -1749,12 +1772,12 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); + if (_are_any_hardreset_lines_asserted(oh)) + return 0; + am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_all_hardreset_lines_asserted(oh)) - return 0; - v = _am33xx_wait_target_disable(oh); if (v) pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 35dcdb66a4e0..bd9220ed5ab9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -219,7 +219,7 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = { /* MPU */ static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 }, + { .name = "pmu", .irq = 3 + OMAP_INTC_START }, { .irq = -1 } }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 285777241d5a..f67b7ee07dd4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -94,7 +94,7 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = { /* MPU */ static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 }, + { .name = "pmu", .irq = 3 + OMAP_INTC_START }, { .irq = -1 } }; @@ -3683,6 +3683,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &omap3xxx_l4_core__hdq1w, &am35xx_mdio__l3, &am35xx_l4_core__mdio, &am35xx_emac__l3, @@ -3737,7 +3738,7 @@ int __init omap3xxx_hwmod_init(void) } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; - }; + } r = omap_hwmod_register_links(h); if (r < 0) @@ -3754,7 +3755,7 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap3430es2plus_hwmod_ocp_ifs; - }; + } if (h) { r = omap_hwmod_register_links(h); @@ -3769,7 +3770,7 @@ int __init omap3xxx_hwmod_init(void) } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap3430_es3plus_hwmod_ocp_ifs; - }; + } if (h) r = omap_hwmod_register_links(h); diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 45ad7f74f356..58e16aef40bb 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -18,6 +18,7 @@ */ #include <linux/module.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <plat/omap_device.h> @@ -62,13 +63,23 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, i); return -EINVAL; } - oh = omap_hwmod_lookup(opp_def->hwmod_name); - if (!oh || !oh->od) { - pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", - __func__, opp_def->hwmod_name, i); - continue; + + if (!strncmp(opp_def->hwmod_name, "mpu", 3)) { + /* + * All current OMAPs share voltage rail and + * clock source, so CPU0 is used to represent + * the MPU-SS. + */ + dev = get_cpu_device(0); + } else { + oh = omap_hwmod_lookup(opp_def->hwmod_name); + if (!oh || !oh->od) { + pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", + __func__, opp_def->hwmod_name, i); + continue; + } + dev = &oh->od->pdev->dev; } - dev = &oh->od->pdev->dev; r = opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3e1345fc0713..46092cd806fa 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -168,7 +168,7 @@ static int pm_dbg_open(struct inode *inode, struct file *file) default: return single_open(file, pm_dbg_show_timers, &inode->i_private); - }; + } } static const struct file_operations debug_fops = { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index abefbc4d8e0b..ea61c32957bd 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -16,6 +16,7 @@ #include <linux/opp.h> #include <linux/export.h> #include <linux/suspend.h> +#include <linux/cpu.h> #include <asm/system_misc.h> @@ -169,7 +170,15 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - dev = omap_device_get_by_hwmod_name(oh_name); + if (!strncmp(oh_name, "mpu", 3)) + /* + * All current OMAPs share voltage rail and clock + * source, so CPU0 is used to represent the MPU-SS. + */ + dev = get_cpu_device(0); + else + dev = omap_device_get_by_hwmod_name(oh_name); + if (IS_ERR(dev)) { pr_err("%s: Unable to get dev pointer for hwmod %s\n", __func__, oh_name); @@ -177,7 +186,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, } voltdm = voltdm_lookup(vdd_name); - if (IS_ERR(voltdm)) { + if (!voltdm) { pr_err("%s: unable to get vdd pointer for vdd_%s\n", __func__, vdd_name); goto exit; diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index cbeae56b56a9..f8217a5a4a26 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -122,7 +122,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senp_mod = 0x1; sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); - if (IS_ERR(sr_data->voltdm)) { + if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", __func__, sr_dev_attr->sensor_voltdm_name); goto exit; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 8847d6eb2313..44f9aa7ec0c0 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -378,7 +378,7 @@ static void __init realtime_counter_init(void) return; } sys_clk = clk_get(NULL, "sys_clkin_ck"); - if (!sys_clk) { + if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); return; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 18a851959425..d83ae4540b9b 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -158,7 +158,7 @@ static struct regulator_init_data omap3_vpll2_idata = { }; static struct regulator_consumer_supply omap3_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap3_vdd2_supply[] = { diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index fc3afc7cd366..a103c8ffea9f 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -22,6 +22,7 @@ #include <asm/mach/map.h> #include <mach/pxa25x.h> +#undef GPIO24_SSP1_SFRM #include <mach/pxa27x.h> #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 997e6da9a9c4..32e0d7998355 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -105,6 +105,7 @@ static struct pxamci_platform_data palmte2_mci_platform_data = { .gpio_power = GPIO_NR_PALMTE2_SD_POWER, }; +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) /****************************************************************************** * GPIO keys ******************************************************************************/ @@ -132,6 +133,7 @@ static struct platform_device palmte2_pxa_keys = { .platform_data = &palmte2_pxa_keys_data, }, }; +#endif /****************************************************************************** * Backlight diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 5a406f794798..ec55c575ed19 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -55,7 +55,6 @@ #ifdef CONFIG_PM static int sharpsl_off_charge_battery(void); static int sharpsl_check_battery_voltage(void); -static int sharpsl_fatal_check(void); #endif static int sharpsl_check_battery_temp(void); static int sharpsl_ac_check(void); @@ -686,53 +685,6 @@ static int corgi_pxa_pm_enter(suspend_state_t state) return 0; } -/* - * Check for fatal battery errors - * Fatal returns -1 - */ -static int sharpsl_fatal_check(void) -{ - int buff[5], temp, i, acin; - - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); - - /* Check AC-Adapter */ - acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - sharpsl_pm.machinfo->charge(0); - udelay(100); - sharpsl_pm.machinfo->discharge(1); /* enable discharge */ - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery : check inserting battery ? */ - for (i = 0; i < 5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - udelay(100); - sharpsl_pm.machinfo->charge(1); - sharpsl_pm.machinfo->discharge(0); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); - - if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || - (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) - return -1; - return 0; -} - static int sharpsl_off_charge_error(void) { dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 392412ce4dac..c773e4dded64 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -768,8 +768,7 @@ static unsigned long viper_tpm; static int __init viper_tpm_setup(char *str) { - strict_strtoul(str, 10, &viper_tpm); - return 1; + return strict_strtoul(str, 10, &viper_tpm) >= 0; } __setup("tpm=", viper_tpm_setup); diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index b91bc87b3dcf..fcb1d59f7aec 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -960,7 +960,9 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type) *ecp = ec; slot_to_expcard[slot] = ec; - device_register(&ec->dev); + rc = device_register(&ec->dev); + if (rc) + goto nodev; return 0; diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c index 23ec97370f32..ff141b0af26b 100644 --- a/arch/arm/mach-s3c24xx/irq-s3c2416.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c @@ -232,7 +232,7 @@ struct irq_chip s3c2416_irq_second = { /* IRQ initialisation code */ -static int __init s3c2416_add_sub(unsigned int base, +static int s3c2416_add_sub(unsigned int base, void (*demux)(unsigned int, struct irq_desc *), struct irq_chip *chip, @@ -251,7 +251,7 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static void __init s3c2416_irq_add_second(void) +static void s3c2416_irq_add_second(void) { unsigned long pend; unsigned long last; @@ -287,7 +287,7 @@ static void __init s3c2416_irq_add_second(void) } } -static int __init s3c2416_irq_add(struct device *dev, +static int s3c2416_irq_add(struct device *dev, struct subsys_interface *sif) { printk(KERN_INFO "S3C2416: IRQ Support\n"); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c index ac2829f56d12..5e69109c0928 100644 --- a/arch/arm/mach-s3c24xx/irq-s3c2443.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2443.c @@ -222,7 +222,7 @@ static struct irq_chip s3c2443_irq_cam = { /* IRQ initialisation code */ -static int __init s3c2443_add_sub(unsigned int base, +static int s3c2443_add_sub(unsigned int base, void (*demux)(unsigned int, struct irq_desc *), struct irq_chip *chip, @@ -241,7 +241,7 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct device *dev, +static int s3c2443_irq_add(struct device *dev, struct subsys_interface *sif) { printk("S3C2443: IRQ Support\n"); diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index 17f8356177c1..ddf7a3c743ac 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -104,7 +104,7 @@ static struct s3c2410_hcd_info usb_simtec_info __initdata = { }; -int usb_simtec_init(void) +int __init usb_simtec_init(void) { int ret; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index e1ccda6128eb..6a7ad3c2a3fc 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -388,7 +388,7 @@ static void __init map_sa1100_gpio_regs( void ) */ static void __init get_assabet_scr(void) { - unsigned long scr, i; + unsigned long uninitialized_var(scr), i; GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */ GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */ diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index b8b4ab323a3e..6d91a914c1dd 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -41,7 +41,7 @@ static struct hw_pci shark_pci __initdata = { static int __init shark_pci_init(void) { if (!machine_is_shark()) - return; + return -ENODEV; pcibios_min_io = 0x6000; pcibios_min_mem = 0x50000000; diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index ed77ab8c9143..d47e215aca87 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -100,7 +100,7 @@ static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; } extern void shmobile_smp_init_cpus(unsigned int ncores); -static inline void shmobile_init_late(void) +static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); shmobile_cpuidle_init(); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 5f3c03b61f8e..11680c532b38 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -16,7 +16,7 @@ config ARCH_TEGRA_2x_SOC select ARM_ERRATA_742230 select ARM_ERRATA_751472 select ARM_ERRATA_754327 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 select CPU_FREQ_TABLE if CPU_FREQ @@ -37,7 +37,7 @@ config ARCH_TEGRA_3x_SOC select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP select PL310_ERRATA_769419 if CACHE_L2X0 select CPU_FREQ_TABLE if CPU_FREQ help @@ -57,8 +57,6 @@ config TEGRA_AHB which controls AHB bus master arbitration and some perfomance parameters(priority, prefech size). -comment "Tegra board type" - choice prompt "Default low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c77c86c47369..5848206ee9b9 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,9 +5,9 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select PL310_ERRATA_753970 + select PL310_ERRATA_753970 if CACHE_PL310 select ARM_ERRATA_754322 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP select CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h index bb9e2d23fee3..e6e81fdaf109 100644 --- a/arch/arm/mach-vt8500/include/mach/uncompress.h +++ b/arch/arm/mach-vt8500/include/mach/uncompress.h @@ -15,15 +15,15 @@ * */ -#define UART0_PHYS 0xd8200000 -#include <asm/io.h> +#define UART0_PHYS 0xd8200000 +#define UART0_ADDR(x) *(volatile unsigned char *)(UART0_PHYS + x) static void putc(const char c) { - while (readb(UART0_PHYS + 0x1c) & 0x2) + while (UART0_ADDR(0x1c) & 0x2) /* Tx busy, wait and poll */; - writeb(c, UART0_PHYS); + UART0_ADDR(0) = c; } static void flush(void) diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 587ea950d08b..8d3871f110a5 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -77,8 +77,11 @@ static void vt8500_power_off(void) void __init vt8500_init(void) { - struct device_node *np, *fb; + struct device_node *np; +#if defined(CONFIG_FB_VT8500) || defined(CONFIG_FB_WM8505) + struct device_node *fb; void __iomem *gpio_base; +#endif #ifdef CONFIG_FB_VT8500 fb = of_find_compatible_node(NULL, NULL, "via,vt8500-fb"); diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ca83a7659aef..c9d1c3603bbf 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -43,11 +43,13 @@ config OMAP_DEBUG_DEVICES config OMAP_DEBUG_LEDS def_bool y if NEW_LEDS + select LEDS_CLASS depends on OMAP_DEBUG_DEVICES config POWER_AVS_OMAP bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM + select POWER_SUPPLY help Say Y to enable AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 2e826f1faf7b..87ba8dd0d791 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -52,22 +52,29 @@ static u32 notrace omap_32k_read_sched_clock(void) * nsecs and adds to a monotonically increasing timespec. */ static struct timespec persistent_ts; -static cycles_t cycles, last_cycles; +static cycles_t cycles; static unsigned int persistent_mult, persistent_shift; +static DEFINE_SPINLOCK(read_persistent_clock_lock); + static void omap_read_persistent_clock(struct timespec *ts) { unsigned long long nsecs; - cycles_t delta; - struct timespec *tsp = &persistent_ts; + cycles_t last_cycles; + unsigned long flags; + + spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; - delta = cycles - last_cycles; - nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift); + nsecs = clocksource_cyc2ns(cycles - last_cycles, + persistent_mult, persistent_shift); + + timespec_add_ns(&persistent_ts, nsecs); + + *ts = persistent_ts; - timespec_add_ns(tsp, nsecs); - *ts = *tsp; + spin_unlock_irqrestore(&read_persistent_clock_lock, flags); } /** diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 9f6413324df9..9722f418ae1f 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -38,7 +38,7 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) if (!dev || t < -1) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (t == -1) pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", @@ -67,7 +67,7 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) agent_id != OCP_TARGET_AGENT)) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (r == 0) pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", @@ -93,7 +93,7 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, if (!req_dev || !dev || t < -1) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (t == -1) pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", @@ -123,7 +123,7 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t) if (!dev || t < -1) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (t == -1) pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index cee85a55bd82..7a7d1f2a65e9 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -725,7 +725,7 @@ struct platform_device __init *omap_device_build_ss(const char *pdev_name, int p dev_set_name(&pdev->dev, "%s", pdev->name); od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); - if (!od) + if (IS_ERR(od)) goto odbs_exit1; ret = platform_device_add_data(pdev, pdata, pdata_len); diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index aab9605f0b43..24ffd8cec51e 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -74,21 +74,21 @@ static inline void netwinder_ds1620_reset(void) static inline void netwinder_lock(unsigned long *flags) { - spin_lock_irqsave(&nw_gpio_lock, *flags); + raw_spin_lock_irqsave(&nw_gpio_lock, *flags); } static inline void netwinder_unlock(unsigned long *flags) { - spin_unlock_irqrestore(&nw_gpio_lock, *flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, *flags); } static inline void netwinder_set_fan(int i) { unsigned long flags; - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } static inline int netwinder_get_fan(void) diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index a0e2f7d70355..e371480d3639 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -583,9 +583,9 @@ static void kick_open(void) * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 65f8e9a54975..1f3417a8322d 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -30,20 +30,12 @@ #include <asm/smp_plat.h> #include <asm/cpu.h> -#include <plat/clock.h> -#include <plat/omap-pm.h> -#include <plat/common.h> -#include <plat/omap_device.h> - -#include <mach/hardware.h> - /* OPP tolerance in percentage */ #define OPP_TOLERANCE 4 static struct cpufreq_frequency_table *freq_table; static atomic_t freq_table_users = ATOMIC_INIT(0); static struct clk *mpu_clk; -static char *mpu_clk_name; static struct device *mpu_dev; static struct regulator *mpu_reg; @@ -108,6 +100,14 @@ static int omap_target(struct cpufreq_policy *policy, } freq = freqs.new * 1000; + ret = clk_round_rate(mpu_clk, freq); + if (IS_ERR_VALUE(ret)) { + dev_warn(mpu_dev, + "CPUfreq: Cannot find matching frequency for %lu\n", + freq); + return ret; + } + freq = ret; if (mpu_reg) { opp = opp_find_freq_ceil(mpu_dev, &freq); @@ -172,7 +172,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) { int result = 0; - mpu_clk = clk_get(NULL, mpu_clk_name); + mpu_clk = clk_get(NULL, "cpufreq_ck"); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); @@ -253,22 +253,10 @@ static struct cpufreq_driver omap_driver = { static int __init omap_cpufreq_init(void) { - if (cpu_is_omap24xx()) - mpu_clk_name = "virt_prcm_set"; - else if (cpu_is_omap34xx()) - mpu_clk_name = "dpll1_ck"; - else if (cpu_is_omap44xx()) - mpu_clk_name = "dpll_mpu_ck"; - - if (!mpu_clk_name) { - pr_err("%s: unsupported Silicon?\n", __func__); - return -EINVAL; - } - - mpu_dev = omap_device_get_by_hwmod_name("mpu"); - if (IS_ERR(mpu_dev)) { + mpu_dev = get_cpu_device(0); + if (!mpu_dev) { pr_warning("%s: unable to get the mpu device\n", __func__); - return PTR_ERR(mpu_dev); + return -EINVAL; } mpu_reg = regulator_get(mpu_dev, "vcc"); diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 84e8d0c59ee5..f9eb91623701 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -27,7 +27,6 @@ #include <asm/gpio.h> -#include <mach/gpio-tegra.h> #include <linux/platform_data/mmc-sdhci-tegra.h> #include "sdhci-pltfm.h" diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index d4957b4edb62..24768a27e1d8 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -930,7 +930,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!sr_info->base) { dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); ret = -ENOMEM; - goto err_release_region; + goto err_free_name; } if (irq) @@ -969,7 +969,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); - goto err_free_name; + goto err_debugfs; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, @@ -1013,11 +1013,11 @@ static int __init omap_sr_probe(struct platform_device *pdev) err_debugfs: debugfs_remove_recursive(sr_info->dbg_dir); -err_free_name: - kfree(sr_info->name); err_iounmap: list_del(&sr_info->node); iounmap(sr_info->base); +err_free_name: + kfree(sr_info->name); err_release_region: release_mem_region(mem->start, resource_size(mem)); err_free_devinfo: diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index 24c430f721d4..672af8b56542 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -1482,9 +1482,9 @@ vnc_mute_spkr(wavnc_info *devc) { unsigned long flags; - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } static void |